Skip to contentSkip to conversation

net: mvpp2: Add TCAM entry to drop flow control pause frames

PATCH Applied [email protected] 2 participants 2 messages Dec 17, 2020 – Dec 19, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 net: mvpp2: Add TCAM entry to drop flow control pause frames

From: Stefan Chulski <[email protected]>

Issue:
Flow control frame used to pause GoP(MAC) was delivered to the CPU and created a load on the CPU. Since XOFF/XON frames are used only by MAC, these frames should be dropped inside MAC.

Fix:
According to 802.3-2012 - IEEE Standard for Ethernet pause frame has unique destination MAC address 01-80-C2-00-00-01.
Add TCAM parser entry to track and drop pause frames by destination MAC.

Fixes 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")

---

Changes in v2:
- Fix "fixes tag"

 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 34 ++++++++++++++++++++
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h |  2 +-
 2 files changed, 35 insertions(+), 1 deletion(-)
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c +34 -0
index 1a272c2..3a9c747 100644
@@ -405,6 +405,39 @@ static int mvpp2_prs_tcam_first_free(struct mvpp2 *priv, unsigned char start,
 	return -EINVAL;
 }
 
+/* Drop flow control pause frames */
+static void mvpp2_prs_drop_fc(struct mvpp2 *priv)
+{
+	struct mvpp2_prs_entry pe;
+	unsigned int len;
+	unsigned char da[ETH_ALEN] = {
+			0x01, 0x80, 0xC2, 0x00, 0x00, 0x01 };
+
+	memset(&pe, 0, sizeof(pe));
+
+	/* For all ports - drop flow control frames */
+	pe.index = MVPP2_PE_FC_DROP;
+	mvpp2_prs_tcam_lu_set(&pe, MVPP2_PRS_LU_MAC);
+
+	/* Set match on DA */
+	len = ETH_ALEN;
+	while (len--)
+		mvpp2_prs_tcam_data_byte_set(&pe, len, da[len], 0xff);
+
+	mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_DROP_MASK,
+				 MVPP2_PRS_RI_DROP_MASK);
+
+	mvpp2_prs_sram_bits_set(&pe, MVPP2_PRS_SRAM_LU_GEN_BIT, 1);
+	mvpp2_prs_sram_next_lu_set(&pe, MVPP2_PRS_LU_FLOWS);
+
+	/* Mask all ports */
+	mvpp2_prs_tcam_port_map_set(&pe, MVPP2_PRS_PORT_MASK);
+
+	/* Update shadow table and hw entry */
+	mvpp2_prs_shadow_set(priv, pe.index, MVPP2_PRS_LU_MAC);
+	mvpp2_prs_hw_write(priv, &pe);
+}
+
 /* Enable/disable dropping all mac da's */
 static void mvpp2_prs_mac_drop_all_set(struct mvpp2 *priv, int port, bool add)
 {
@@ -1168,6 +1201,7 @@ static void mvpp2_prs_mac_init(struct mvpp2 *priv)
 	mvpp2_prs_hw_write(priv, &pe);
 
 	/* Create dummy entries for drop all and promiscuous modes */
+	mvpp2_prs_drop_fc(priv);
 	mvpp2_prs_mac_drop_all_set(priv, 0, false);
 	mvpp2_prs_mac_promisc_set(priv, 0, MVPP2_PRS_L2_UNI_CAST, false);
 	mvpp2_prs_mac_promisc_set(priv, 0, MVPP2_PRS_L2_MULTI_CAST, false);
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h +1 -1
index e22f6c8..4b68dd3 100644
@@ -129,7 +129,7 @@
 #define MVPP2_PE_VID_EDSA_FLTR_DEFAULT	(MVPP2_PRS_TCAM_SRAM_SIZE - 7)
 #define MVPP2_PE_VLAN_DBL		(MVPP2_PRS_TCAM_SRAM_SIZE - 6)
 #define MVPP2_PE_VLAN_NONE		(MVPP2_PRS_TCAM_SRAM_SIZE - 5)
-/* reserved */
+#define MVPP2_PE_FC_DROP		(MVPP2_PRS_TCAM_SRAM_SIZE - 4)
 #define MVPP2_PE_MAC_MC_PROMISCUOUS	(MVPP2_PRS_TCAM_SRAM_SIZE - 3)
 #define MVPP2_PE_MAC_UC_PROMISCUOUS	(MVPP2_PRS_TCAM_SRAM_SIZE - 2)
 #define MVPP2_PE_MAC_NON_PROMISCUOUS	(MVPP2_PRS_TCAM_SRAM_SIZE - 1)
Signature · 1 line
1.9.1
maintainer Applied
#1 lore raw
Quoted 7 lines · On Thu, 17 Dec 2020 20:30:17 +0200 [email protected] wrote:

From: Stefan Chulski <[email protected]>

Issue:
Flow control frame used to pause GoP(MAC) was delivered to the CPU and created a load on the CPU. Since XOFF/XON frames are used only by MAC, these frames should be dropped inside MAC.

Quoted 7 lines

Fix:
According to 802.3-2012 - IEEE Standard for Ethernet pause frame has unique destination MAC address 01-80-C2-00-00-01.
Add TCAM parser entry to track and drop pause frames by destination MAC.

Fixes 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")

Applied, thanks..

Quoted 5 lines
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c +0 -0
index 1a272c2..3a9c747 100644

drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c static int mvpp2_prs_tcam_first_free(struct mvpp2 *priv, unsigned char start, · line 414

Quoted 10 lines
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c +7 -0
@@ -405,6 +405,39 @@ static int mvpp2_prs_tcam_first_free(struct mvpp2 *priv, unsigned char start,
 	return -EINVAL;
 }
 
+/* Drop flow control pause frames */
+static void mvpp2_prs_drop_fc(struct mvpp2 *priv)
+{
+	struct mvpp2_prs_entry pe;
+	unsigned int len;
+	unsigned char da[ETH_ALEN] = {
+			0x01, 0x80, 0xC2, 0x00, 0x00, 0x01 };

but I reordered these so they follow the reverse xmas tree ordering netdev prefers.