arm64: dts: mediatek: Correct i2c clock of MT8192
Subsystems (2)
PATCH 1/1 arm64: dts: mediatek: Correct i2c clock of MT8192
From: Qii Wang <[email protected]>
imp wrapper clock is the i2c source clock of MT8192
--- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 43 ++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 10 deletions(-)
arch/arm64/boot/dts/mediatek/mt8192.dtsi +33 -10
@@ -17,6 +17,19 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + }; + clk26m: oscillator0 { compatible = "fixed-clock"; #clock-cells = <0>;
@@ -593,7 +606,8 @@ reg = <0 0x11cb0000 0 0x1000>, <0 0x10217300 0 0x80>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_e CLK_IMP_IIC_WRAP_E_I2C3>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -612,7 +626,8 @@ reg = <0 0x11d00000 0 0x1000>, <0 0x10217600 0 0x180>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -625,7 +640,8 @@ reg = <0 0x11d01000 0 0x1000>, <0 0x10217780 0 0x180>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C8>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -638,7 +654,8 @@ reg = <0 0x11d02000 0 0x1000>, <0 0x10217900 0 0x180>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C9>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -657,7 +674,8 @@ reg = <0 0x11d20000 0 0x1000>, <0 0x10217100 0 0x80>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C1>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -670,7 +688,8 @@ reg = <0 0x11d21000 0 0x1000>, <0 0x10217180 0 0x180>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C2>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -683,7 +702,8 @@ reg = <0 0x11d22000 0 0x1000>, <0 0x10217380 0 0x180>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C4>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -702,7 +722,8 @@ reg = <0 0x11e00000 0 0x1000>, <0 0x10217500 0 0x80>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C5>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -721,7 +742,8 @@ reg = <0 0x11f00000 0 0x1000>, <0 0x10217080 0 0x80>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C0>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
@@ -734,7 +756,8 @@ reg = <0 0x11f01000 0 0x1000>, <0 0x10217580 0 0x80>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C6>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;
Signature · 5 lines
1.9.1 _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
kernel test robot
build botI love your patch! Yet something to improve:
Hi,
I love your patch! Yet something to improve:
[auto build test ERROR on soc/for-next]
[also build test ERROR on next-20201223]
[cannot apply to robh/for-next arm/for-next keystone/next rockchip/for-next arm64/for-next/core shawnguo/for-next xlnx/master kvmarm/next mediatek/for-next v5.10] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/qii-wang-mediatek-com/arm64-dts-mediatek-Correct-i2c-clock-of-MT8192/20201221-203038 base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next config: arm64-allyesconfig (attached as .config) compiler: aarch64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/aa3c0f956c1f7a9f1275c1e13281033e67ce4f37
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review qii-wang-mediatek-com/arm64-dts-mediatek-Correct-i2c-clock-of-MT8192/20201221-203038 git checkout aa3c0f956c1f7a9f1275c1e13281033e67ce4f37
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
>> Error: arch/arm64/boot/dts/mediatek/mt8192.dtsi:400.30-31 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Matthias Brugger
maintainerQuoted 6 lines · On 21/12/2020 13:26, [email protected] wrote:
From: Qii Wang <[email protected]>
imp wrapper clock is the i2c source clock of MT8192
Signed-off-by Qii Wang <[email protected]>---
Thanks for your patch. The next time please provide information about any out-of-tree series that are needed to apply cleanly.
Regards,
Matthias
Quoted 128 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 43 ++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 10 deletions(-)arch/arm64/boot/dts/mediatek/mt8192.dtsi +33
-10@@ -17,6 +17,19 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + }; + clk26m: oscillator0 { compatible = "fixed-clock"; #clock-cells = <0>;@@ -593,7 +606,8 @@ reg = <0 0x11cb0000 0 0x1000>, <0 0x10217300 0 0x80>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_e CLK_IMP_IIC_WRAP_E_I2C3>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -612,7 +626,8 @@ reg = <0 0x11d00000 0 0x1000>, <0 0x10217600 0 0x180>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -625,7 +640,8 @@ reg = <0 0x11d01000 0 0x1000>, <0 0x10217780 0 0x180>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C8>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -638,7 +654,8 @@ reg = <0 0x11d02000 0 0x1000>, <0 0x10217900 0 0x180>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C9>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -657,7 +674,8 @@ reg = <0 0x11d20000 0 0x1000>, <0 0x10217100 0 0x80>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C1>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -670,7 +688,8 @@ reg = <0 0x11d21000 0 0x1000>, <0 0x10217180 0 0x180>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C2>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -683,7 +702,8 @@ reg = <0 0x11d22000 0 0x1000>, <0 0x10217380 0 0x180>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C4>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -702,7 +722,8 @@ reg = <0 0x11e00000 0 0x1000>, <0 0x10217500 0 0x80>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C5>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -721,7 +742,8 @@ reg = <0 0x11f00000 0 0x1000>, <0 0x10217080 0 0x80>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C0>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;@@ -734,7 +756,8 @@ reg = <0 0x11f01000 0 0x1000>, <0 0x10217580 0 0x80>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C6>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>;