dt-bindings: mfd: gateworks-gsc: Add fan-tach mode
Subsystems (2)
PATCH 1/1 dt-bindings: mfd: gateworks-gsc: Add fan-tach mode
In 7497d4a66c59 ("hwmon: (gsc-hwmon) add fan sensor") a mode was added to report RPM's from a fan tach input.
Add this mode to the dt-bindings for the Gateworks System Controller.
Signed-off-by Tim Harvey <[email protected]>
--- Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +2 -1
@@ -83,8 +83,9 @@ properties: 2 - scaled voltage based on an optional resistor divider and optional offset 3 - pre-scaled 16-bit voltage value + 4 - fan tach input to report RPM's $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] + enum: [0, 1, 2, 3, 4] gw,voltage-divider-ohms: description: Values of resistors for divider on raw ADC input
Signature · 1 line
2.7.4
Quoted 10 lines · Tim Harvey
In
7497d4a66c59("hwmon: (gsc-hwmon) add fan sensor") a mode was added to report RPM's from a fan tach input.Add this mode to the dt-bindings for the Gateworks System Controller.
Signed-off-by Tim Harvey <[email protected]>--- Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Acked-by Rob Herring <[email protected]>
Lee Jones
AppliedQuoted 9 lines · Tim Harvey
In
7497d4a66c59("hwmon: (gsc-hwmon) add fan sensor") a mode was added to report RPM's from a fan tach input.Add this mode to the dt-bindings for the Gateworks System Controller.
Signed-off-by Tim Harvey <[email protected]>--- Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Applied, thanks.
Signature · 4 lines
Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog