Skip to contentSkip to conversation

scsi: Support to handle Intermittent errors

PATCH Applied Muneendra 2 participants 8 messages Jan 7, 2021 – Jan 21, 2021

Subsystems (2)
lore
Share & tools
lore

Muneendra

author
#0 lore raw

v8 cover scsi: Support to handle Intermittent errors

This patch adds a support to prevent retries of all the io's after an abort succeeds on a particular device when transport connectivity to the device is encountering intermittent errors.

Intermittent connectivity is a condition that can be detected by transport fabric notifications. A service can monitor the ELS notifications and take action on all the outstanding io's of a scsi device at that instant.

This feature is intended to be used when the device is part of a multipath environment. When the service detects the poor connectivity, the multipath path can be placed in a marginal path group and ignored further io operations.

After placing a path in the marginal path group,the daemon sets the port_state to Marginal which sets bit in scmd->state for all the io's on that particular device with the new sysfs interface provided in this patch.This prevent retries of all the
io's if an io hits a scsi timeout which inturn issues an abort. On Abort succeeds on a marginal path the io will be immediately retried on another active path.On abort fails then the things escalates to existing target reset sg interface recovery process.

Below is the interface provided to set the port state to Marginal and Online.
echo "Marginal" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state echo "Online" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state

The patches were cut against 5.11-rc2

---
v8:
Rebase the patches on top of 5.11-rc2

v7:

Added New routine in scsi_host_template to decide if a cmd is retryable instead of checking the same using SCMD_NORETRIES_ABORT bit as the cmd retry part can be checked by validating the port state.

Removed the changes related to SCMD_NORETRIES_ABORT bit.

Added a new function fc_eh_should_retry_cmd to check whether the cmd should be retried based on the rport state.

Reoreder the patch

The patches were cut against 5.11/scsi-queue tree

v6:
Reordered the patches to make patch ordering and more logical.

v5:
Added the DID_TRANSPORT_MARGINAL case to scsi_decide_disposition

Made changes to clear the SCMD_NORETRIES_ABORT bit if the port_state has changed from marginal to online due to port_delete and port_add as we need the normal cmd retry behaviour while we are calling the eh handlers.

Made changes in fc_scsi_scan_rport as we are checking FC_PORTSTATE_ONLINE instead of FC_PORTSTATE_ONLINE and FC_PORTSTATE_MARGINAL

v4:
Made changes in fc_eh_timed_out callout to set the SCMD_NORETRIES_ABORT if port state is marginal

With this change, we removed the code to loop over running commands and fc_remote_port_chkready changes to set the SCMD_NORETRIES_ABORT

Removed the scsi_cmd argument for fc_remote_port_chkready and reverted back the patches that addressed this change(argument)

Removed unnecessary comments
Handle the return of errors on failure.

v3:
Removed the port_state from starget attributes.
Enabled the store functionality for port_state under remote port Added a new argument to scsi_cmd to fc_remote_port_chkready Used the existing scsi command iterators scsi_host_busy_iter. Rearranged the patches
Added new patches to add new argument for fc_remote_port_chkready

v2:
Added new error code DID_TRANSPORT_MARGINAL to handle marginal errors. Added a new rport_state FC_PORTSTATE_MARGINAL and also added a new sysfs interface port_state to set the port_state to marginal. Added the support in lpfc to handle the marginal state.

*** BLURB HERE ***

Muneendra (5):
scsi: Added a new error code DID_TRANSPORT_MARGINAL in scsi.h
scsi: No retries on abort success
scsi_transport_fc: Added a new rport state FC_PORTSTATE_MARGINAL
scsi_transport_fc: Added store fucntionality to set the rport
port_state using sysfs
scsi:lpfc: Added support for eh_should_retry_cmd

 drivers/scsi/lpfc/lpfc_scsi.c    |   1 +
 drivers/scsi/scsi_error.c        |  23 +++++-
 drivers/scsi/scsi_lib.c          |   1 +
 drivers/scsi/scsi_transport_fc.c | 118 ++++++++++++++++++++++++++-----
 include/scsi/scsi.h              |   1 +
 include/scsi/scsi_host.h         |   6 ++
 include/scsi/scsi_transport_fc.h |   4 +-
 7 files changed, 133 insertions(+), 21 deletions(-)
Signature · 1 line
2.26.2
author
#1 lore raw

PATCH v8 1/5 scsi: Added a new error code DID_TRANSPORT_MARGINAL in scsi.h

Added a new error code DID_TRANSPORT_MARGINAL to handle marginal errors in scsi.h

Added a code in scsi_result_to_blk_status to translate
a new error DID_TRANSPORT_MARGINAL to the corresponding blk_status_t i.e BLK_STS_TRANSPORT

Added DID_TRANSPORT_MARGINAL case to scsi_decide_disposition

---
v8:
Rebased the patches on top of 5.11-rc2

v7:
Rearranged the patch by moving the DID_TRANSPORT_MARGINAL and the changes with respect to the same to this patch from the previous patch2 in v6

Removed the previuos patch patch1 in v6 as in the current approach there is no need of this bit SCMD_NORETRIES_ABORT

v6:
Rearranged the patch by merging second hunk of the patch2 in v5 to this patch

v5:
added the DID_TRANSPORT_MARGINAL case to scsi_decide_disposition
v4:
Modified the comments in the code appropriately

v3:
Merged first part of the previous patch(v2 patch3) with this patch.

v2:
set the hostbyte as DID_TRANSPORT_MARGINAL instead of DID_TRANSPORT_FAILFAST.

---
 drivers/scsi/scsi_error.c | 6 ++++++
 drivers/scsi/scsi_lib.c   | 1 +
 include/scsi/scsi.h       | 1 +
 3 files changed, 8 insertions(+)
drivers/scsi/scsi_error.c +6 -0
index f11f51e2465f..28056ee498b3 100644
@@ -1861,6 +1861,12 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 		 * the fast io fail tmo fired), so send IO directly upwards.
 		 */
 		return SUCCESS;
+	case DID_TRANSPORT_MARGINAL:
+		/*
+		 * caller has decided not to do retries on
+		 * abort success, so send IO directly upwards
+		 */
+		return SUCCESS;
 	case DID_ERROR:
 		if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
 		    status_byte(scmd->result) == RESERVATION_CONFLICT)
drivers/scsi/scsi_lib.c +1 -0
index b3f14f05340a..d0ae586565f8 100644
@@ -630,6 +630,7 @@ static blk_status_t scsi_result_to_blk_status(struct scsi_cmnd *cmd, int result)
 			return BLK_STS_OK;
 		return BLK_STS_IOERR;
 	case DID_TRANSPORT_FAILFAST:
+	case DID_TRANSPORT_MARGINAL:
 		return BLK_STS_TRANSPORT;
 	case DID_TARGET_FAILURE:
 		set_host_byte(cmd, DID_OK);
include/scsi/scsi.h +1 -0
index 5339baadc082..5b287ad8b727 100644
@@ -159,6 +159,7 @@ static inline int scsi_is_wlun(u64 lun)
 				 * paths might yield different results */
 #define DID_ALLOC_FAILURE 0x12  /* Space allocation on the device failed */
 #define DID_MEDIUM_ERROR  0x13  /* Medium error */
+#define DID_TRANSPORT_MARGINAL 0x14 /* Transport marginal errors */
 #define DRIVER_OK       0x00	/* Driver status                           */
 
 /*
Signature · 1 line
2.26.2
author
#2 lore raw

PATCH v8 2/5 scsi: No retries on abort success

In reply to Muneendra

Added a new optional routine eh_should_retry_cmd
in scsi_host_template that allows the transport to decide if a cmd is retryable.Return true if the transport is in a state the cmd should be retried on.

Added a new interface scsi_eh_should_retry_cmd which checks and calls the new routine eh_should_retry_cmd.

Made changes in scmd_eh_abort_handler and scsi_eh_flush_done_q which calls the scsi_eh_should_retry_cmd to check whether the command needs to be retried.

The above changes were done based on a patch by Mike Christie.

---
v8:
Rebased the patches on top of 5.11-rc2

v7:
Added New routine in scsi_host_template to decide if a cmd is retryable instead of checking the same using SCMD_NORETRIES_ABORT bit as the cmd retry part can be checked by validating the port state.

Moved the DID_TRANSPORT_MARGINAL changes to previous patch for reordering

v6:
Rearranged the patch by merging second hunk of the patch2 in v5 to this patch

v5:
added the DID_TRANSPORT_MARGINAL case to
scsi_decide_disposition
v4:
Modified the comments in the code appropriately

v3:
Merged first part of the previous patch(v2 patch3) with this patch.

v2:
set the hostbyte as DID_TRANSPORT_MARGINAL instead of DID_TRANSPORT_FAILFAST.

---
 drivers/scsi/scsi_error.c | 17 +++++++++++++++--
 include/scsi/scsi_host.h  |  6 ++++++
 2 files changed, 21 insertions(+), 2 deletions(-)
drivers/scsi/scsi_error.c +15 -2
index 28056ee498b3..1cdfa5a8ca09 100644
@@ -124,6 +124,17 @@ static bool scsi_cmd_retry_allowed(struct scsi_cmnd *cmd)
 	return ++cmd->retries <= cmd->allowed;
 }
 
+static bool scsi_eh_should_retry_cmd(struct scsi_cmnd *cmd)
+{
+	struct scsi_device *sdev = cmd->device;
+	struct Scsi_Host *host = sdev->host;
+
+	if (host->hostt->eh_should_retry_cmd)
+		return  host->hostt->eh_should_retry_cmd(cmd);
+
+	return true;
+}
+
 /**
  * scmd_eh_abort_handler - Handle command aborts
  * @work:	command to be aborted.
@@ -159,7 +170,8 @@ scmd_eh_abort_handler(struct work_struct *work)
 						    "eh timeout, not retrying "
 						    "aborted command\n"));
 			} else if (!scsi_noretry_cmd(scmd) &&
-				   scsi_cmd_retry_allowed(scmd)) {
+				   scsi_cmd_retry_allowed(scmd) &&
+				scsi_eh_should_retry_cmd(scmd)) {
 				SCSI_LOG_ERROR_RECOVERY(3,
 					scmd_printk(KERN_WARNING, scmd,
 						    "retry aborted command\n"));
@@ -2111,7 +2123,8 @@ void scsi_eh_flush_done_q(struct list_head *done_q)
 	list_for_each_entry_safe(scmd, next, done_q, eh_entry) {
 		list_del_init(&scmd->eh_entry);
 		if (scsi_device_online(scmd->device) &&
-		    !scsi_noretry_cmd(scmd) && scsi_cmd_retry_allowed(scmd)) {
+		    !scsi_noretry_cmd(scmd) && scsi_cmd_retry_allowed(scmd) &&
+			scsi_eh_should_retry_cmd(scmd)) {
 			SCSI_LOG_ERROR_RECOVERY(3,
 				scmd_printk(KERN_INFO, scmd,
 					     "%s: flush retry cmd\n",
include/scsi/scsi_host.h +6 -0
index 701f178b20ae..e30fd963b97d 100644
@@ -314,6 +314,12 @@ struct scsi_host_template {
 	 * Status: OPTIONAL
 	 */
 	enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *);
+	/*
+	 * Optional routine that allows the transport to decide if a cmd
+	 * is retryable. Return true if the transport is in a state the
+	 * cmd should be retried on.
+	 */
+	bool (*eh_should_retry_cmd)(struct scsi_cmnd *scmd);
 
 	/* This is an optional routine that allows transport to initiate
 	 * LLD adapter or firmware reset using sysfs attribute.
Signature · 1 line
2.26.2
author
#3 lore raw

PATCH v8 3/5 scsi_transport_fc: Added a new rport state FC_PORTSTATE_MARGINAL

In reply to Muneendra

Added a new rport state FC_PORTSTATE_MARGINAL.

Added a new interface fc_eh_should_retry_cmd which Checks if the cmd should be retried or not by checking the rport state.
If the rport state is marginal it returns
false to make sure there won't be any retries on the cmd.

Also made changes in fc_remote_port_delete,fc_user_scan_tgt, fc_timeout_deleted_rport functions to handle the new rport state FC_PORTSTATE_MARGINAL.

---
v8:
Rebased the patches on top of 5.11-rc2

v7:
Removed the changes related to SCMD_NORETRIES_ABORT bit.

Added a new function fc_eh_should_retry_cmd to check whether the cmd should be retried based on the rport state.

v6:
No change

v5:
Made changes to clear the SCMD_NORETRIES_ABORT bit if the port_state has changed from marginal to online due to port_delete and port_add as we need the normal cmd retry behaviour

Made changes in fc_scsi_scan_rport as we are checking FC_PORTSTATE_ONLINE instead of FC_PORTSTATE_ONLINE and FC_PORTSTATE_MARGINAL

v4:
Made changes in fc_eh_timed_out to call fc_rport_chkmarginal_set_noretries so that SCMD_NORETRIES_ABORT bit in cmd->state is set if rport state is marginal.

Removed the newly added scsi_cmd argument to fc_remote_port_chkready as the current patch handles only SCSI EH timeout/abort case.

v3:
Rearranged the patch so that all the changes with respect to new rport state is part of this patch.
Added a new argument to scsi_cmd to fc_remote_port_chkready

v2:
New patch

---
 drivers/scsi/scsi_transport_fc.c | 62 +++++++++++++++++++++++---------
 include/scsi/scsi_transport_fc.h |  4 ++-
 2 files changed, 49 insertions(+), 17 deletions(-)
drivers/scsi/scsi_transport_fc.c +46 -16
index a926e8f9e56e..ffd25195ae62 100644
@@ -148,20 +148,23 @@ fc_enum_name_search(host_event_code, fc_host_event_code,
 static struct {
 	enum fc_port_state	value;
 	char			*name;
+	int			matchlen;
 } fc_port_state_names[] = {
-	{ FC_PORTSTATE_UNKNOWN,		"Unknown" },
-	{ FC_PORTSTATE_NOTPRESENT,	"Not Present" },
-	{ FC_PORTSTATE_ONLINE,		"Online" },
-	{ FC_PORTSTATE_OFFLINE,		"Offline" },
-	{ FC_PORTSTATE_BLOCKED,		"Blocked" },
-	{ FC_PORTSTATE_BYPASSED,	"Bypassed" },
-	{ FC_PORTSTATE_DIAGNOSTICS,	"Diagnostics" },
-	{ FC_PORTSTATE_LINKDOWN,	"Linkdown" },
-	{ FC_PORTSTATE_ERROR,		"Error" },
-	{ FC_PORTSTATE_LOOPBACK,	"Loopback" },
-	{ FC_PORTSTATE_DELETED,		"Deleted" },
+	{ FC_PORTSTATE_UNKNOWN,		"Unknown", 7},
+	{ FC_PORTSTATE_NOTPRESENT,	"Not Present", 11 },
+	{ FC_PORTSTATE_ONLINE,		"Online", 6 },
+	{ FC_PORTSTATE_OFFLINE,		"Offline", 7 },
+	{ FC_PORTSTATE_BLOCKED,		"Blocked", 7 },
+	{ FC_PORTSTATE_BYPASSED,	"Bypassed", 8 },
+	{ FC_PORTSTATE_DIAGNOSTICS,	"Diagnostics", 11 },
+	{ FC_PORTSTATE_LINKDOWN,	"Linkdown", 8 },
+	{ FC_PORTSTATE_ERROR,		"Error", 5 },
+	{ FC_PORTSTATE_LOOPBACK,	"Loopback", 8 },
+	{ FC_PORTSTATE_DELETED,		"Deleted", 7 },
+	{ FC_PORTSTATE_MARGINAL,	"Marginal", 8 },
 };
 fc_enum_name_search(port_state, fc_port_state, fc_port_state_names)
+fc_enum_name_match(port_state, fc_port_state, fc_port_state_names)
 #define FC_PORTSTATE_MAX_NAMELEN	20
 
 
@@ -2509,7 +2512,8 @@ fc_user_scan_tgt(struct Scsi_Host *shost, uint channel, uint id, u64 lun)
 		if (rport->scsi_target_id == -1)
 			continue;
 
-		if (rport->port_state != FC_PORTSTATE_ONLINE)
+		if ((rport->port_state != FC_PORTSTATE_ONLINE) &&
+			(rport->port_state != FC_PORTSTATE_MARGINAL))
 			continue;
 
 		if ((channel == rport->channel) &&
@@ -3373,7 +3377,8 @@ fc_remote_port_delete(struct fc_rport  *rport)
 
 	spin_lock_irqsave(shost->host_lock, flags);
 
-	if (rport->port_state != FC_PORTSTATE_ONLINE) {
+	if ((rport->port_state != FC_PORTSTATE_ONLINE) &&
+		(rport->port_state != FC_PORTSTATE_MARGINAL)) {
 		spin_unlock_irqrestore(shost->host_lock, flags);
 		return;
 	}
@@ -3515,7 +3520,8 @@ fc_timeout_deleted_rport(struct work_struct *work)
 	 * target, validate it still is. If not, tear down the
 	 * scsi_target on it.
 	 */
-	if ((rport->port_state == FC_PORTSTATE_ONLINE) &&
+	if (((rport->port_state == FC_PORTSTATE_ONLINE) ||
+		(rport->port_state == FC_PORTSTATE_MARGINAL)) &&
 	    (rport->scsi_target_id != -1) &&
 	    !(rport->roles & FC_PORT_ROLE_FCP_TARGET)) {
 		dev_printk(KERN_ERR, &rport->dev,
@@ -3658,7 +3664,8 @@ fc_scsi_scan_rport(struct work_struct *work)
 	struct fc_internal *i = to_fc_internal(shost->transportt);
 	unsigned long flags;
 
-	if ((rport->port_state == FC_PORTSTATE_ONLINE) &&
+	if (((rport->port_state == FC_PORTSTATE_ONLINE) ||
+		(rport->port_state == FC_PORTSTATE_MARGINAL)) &&
 	    (rport->roles & FC_PORT_ROLE_FCP_TARGET) &&
 	    !(i->f->disable_target_scan)) {
 		scsi_scan_target(&rport->dev, rport->channel,
@@ -3731,6 +3738,28 @@ int fc_block_scsi_eh(struct scsi_cmnd *cmnd)
 }
 EXPORT_SYMBOL(fc_block_scsi_eh);
 
+/*
+ * fc_eh_should_retry_cmd - Checks if the cmd should be retried or not
+ * @scmd:        The SCSI command to be checked
+ *
+ * This checks the rport state to decide if a cmd is
+ * retryable.
+ *
+ * Returns: true if the rport state is not in marginal state.
+ */
+bool fc_eh_should_retry_cmd(struct scsi_cmnd *scmd)
+{
+	struct fc_rport *rport = starget_to_rport(scsi_target(scmd->device));
+
+	if ((rport->port_state != FC_PORTSTATE_ONLINE) &&
+		(scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT)) {
+		set_host_byte(scmd, DID_TRANSPORT_MARGINAL);
+		return false;
+	}
+	return true;
+}
+EXPORT_SYMBOL_GPL(fc_eh_should_retry_cmd);
+
 /**
  * fc_vport_setup - allocates and creates a FC virtual port.
  * @shost:	scsi host the virtual port is connected to.
@@ -4162,7 +4191,8 @@ static blk_status_t fc_bsg_rport_prep(struct fc_rport *rport)
 	    !(rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT))
 		return BLK_STS_RESOURCE;
 
-	if (rport->port_state != FC_PORTSTATE_ONLINE)
+	if ((rport->port_state != FC_PORTSTATE_ONLINE) &&
+		(rport->port_state != FC_PORTSTATE_MARGINAL))
 		return BLK_STS_IOERR;
 
 	return BLK_STS_OK;
include/scsi/scsi_transport_fc.h +3 -1
index c759b29e46c7..14214ee121ad 100644
@@ -67,6 +67,7 @@ enum fc_port_state {
 	FC_PORTSTATE_ERROR,
 	FC_PORTSTATE_LOOPBACK,
 	FC_PORTSTATE_DELETED,
+	FC_PORTSTATE_MARGINAL,
 };
 
 
@@ -742,7 +743,6 @@ struct fc_function_template {
 	unsigned long	disable_target_scan:1;
 };
 
-
 /**
  * fc_remote_port_chkready - called to validate the remote port state
  *   prior to initiating io to the port.
@@ -758,6 +758,7 @@ fc_remote_port_chkready(struct fc_rport *rport)
 
 	switch (rport->port_state) {
 	case FC_PORTSTATE_ONLINE:
+	case FC_PORTSTATE_MARGINAL:
 		if (rport->roles & FC_PORT_ROLE_FCP_TARGET)
 			result = 0;
 		else if (rport->flags & FC_RPORT_DEVLOSS_PENDING)
@@ -839,6 +840,7 @@ int fc_vport_terminate(struct fc_vport *vport);
 int fc_block_rport(struct fc_rport *rport);
 int fc_block_scsi_eh(struct scsi_cmnd *cmnd);
 enum blk_eh_timer_return fc_eh_timed_out(struct scsi_cmnd *scmd);
+bool fc_eh_should_retry_cmd(struct scsi_cmnd *scmd);
 
 static inline struct Scsi_Host *fc_bsg_to_shost(struct bsg_job *job)
 {
Signature · 1 line
2.26.2
author
#4 lore raw

PATCH v8 4/5 scsi_transport_fc: Added store fucntionality to set the rport port_state using sysfs

In reply to Muneendra

Added a store functionality to set rport port_state using sysfs under fc_remote_ports/rport-*/port_state

With this functionality the user can move the port_state from Marginal -> Online and Online->Marginal.

On Marginal :This interface will set SCMD_NORETRIES_ABORT bit in scmd->state for all the pending io's on the scsi device associated with target port.

On Online :This interface will clear SCMD_NORETRIES_ABORT bit in scmd->state for all the pending io's on the scsi device associated with target port.

Below is the interface provided to set the port state to Marginal and Online.

echo "Marginal" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state echo "Online" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state

---
v8:
Rebased the patches on top of 5.11-rc2

v7:
No change

v6:
No change

v5:
No change

v4:
Addressed the error reported by kernel test robot Removed the code needed to traverse all the devices under rport to set/clear SCMD_NORETRIES_ABORT
Removed unncessary comments.
Return the error values on failure while setting the port_state

v3:
Removed the port_state from starget attributes.
Enabled the store functionality for port_state under remote port. used the starget_for_each_device to traverse around all the devices under rport

v2:
Changed from a noretries_abort attribute under fc_transport/target*/ to port_state for changing the port_state to a marginal state

---
 drivers/scsi/scsi_transport_fc.c | 56 ++++++++++++++++++++++++++++++--
 1 file changed, 54 insertions(+), 2 deletions(-)
drivers/scsi/scsi_transport_fc.c +54 -2
index ffd25195ae62..d378ca4a60fe 100644
@@ -1238,7 +1238,59 @@ show_fc_rport_roles (struct device *dev, struct device_attribute *attr,
 static FC_DEVICE_ATTR(rport, roles, S_IRUGO,
 		show_fc_rport_roles, NULL);
 
-fc_private_rport_rd_enum_attr(port_state, FC_PORTSTATE_MAX_NAMELEN);
+static ssize_t fc_rport_set_marginal_state(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t count)
+{
+	struct fc_rport *rport = transport_class_to_rport(dev);
+	enum fc_port_state port_state;
+	int ret = 0;
+
+	ret = get_fc_port_state_match(buf, &port_state);
+	if (ret)
+		return -EINVAL;
+	if (port_state == FC_PORTSTATE_MARGINAL) {
+		/*
+		 * Change the state to marginal only if the
+		 * current rport state is Online
+		 * Allow only Online->marginal
+		 */
+		if (rport->port_state == FC_PORTSTATE_ONLINE)
+			rport->port_state = port_state;
+		else
+			return -EINVAL;
+	} else if (port_state == FC_PORTSTATE_ONLINE) {
+		/*
+		 * Change the state to Online only if the
+		 * current rport state is Marginal
+		 * Allow only  MArginal->Online
+		 */
+		if (rport->port_state == FC_PORTSTATE_MARGINAL)
+			rport->port_state = port_state;
+		else
+			return -EINVAL;
+	} else
+		return -EINVAL;
+	return count;
+}
+
+static ssize_t
+show_fc_rport_port_state(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	const char *name;
+	struct fc_rport *rport = transport_class_to_rport(dev);
+
+	name = get_fc_port_state_name(rport->port_state);
+	if (!name)
+		return -EINVAL;
+
+	return snprintf(buf, 20, "%s\n", name);
+}
+
+static FC_DEVICE_ATTR(rport, port_state, 0444 | 0200,
+			show_fc_rport_port_state, fc_rport_set_marginal_state);
+
 fc_private_rport_rd_attr(scsi_target_id, "%d\n", 20);
 
 /*
@@ -2681,7 +2733,7 @@ fc_attach_transport(struct fc_function_template *ft)
 	SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_name);
 	SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_id);
 	SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(roles);
-	SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_state);
+	SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(port_state);
 	SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(scsi_target_id);
 	SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo);
 
Signature · 1 line
2.26.2
author
#5 lore raw

PATCH v8 5/5 scsi:lpfc: Added support for eh_should_retry_cmd

In reply to Muneendra

Added support to handle eh_should_retry_cmd in lpfc_template.

---
v8:
Rebased the patches on top of 5.11-rc2

v7:
New patch

---
 drivers/scsi/lpfc/lpfc_scsi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/lpfc/lpfc_scsi.c +1 -0
index 3b989f720937..09812e72a265 100644
@@ -6662,6 +6662,7 @@ struct scsi_host_template lpfc_template = {
 	.info			= lpfc_info,
 	.queuecommand		= lpfc_queuecommand,
 	.eh_timed_out		= fc_eh_timed_out,
+	.eh_should_retry_cmd    = fc_eh_should_retry_cmd,
 	.eh_abort_handler	= lpfc_abort_handler,
 	.eh_device_reset_handler = lpfc_device_reset_handler,
 	.eh_target_reset_handler = lpfc_target_reset_handler,
Signature · 1 line
2.26.2
#6 lore raw
In reply to Muneendra

Muneendra,

Quoted 3 lines

This patch adds a support to prevent retries of all the io's after an abort succeeds on a particular device when transport connectivity to the device is encountering intermittent errors.

Applied to 5.12/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#7 lore raw
In reply to Muneendra
Quoted 9 lines · Muneendra

This patch adds a support to prevent retries of all the io's after an abort succeeds on a particular device when transport connectivity to the device is encountering intermittent errors.

Intermittent connectivity is a condition that can be detected by transport fabric notifications. A service can monitor the ELS notifications and take action on all the outstanding io's of a scsi device at that instant.

[...]

Applied to 5.12/scsi-queue, thanks!

[1/5] scsi: Added a new error code DID_TRANSPORT_MARGINAL in scsi.h

      https://git.kernel.org/mkp/scsi/c/962c8dcdd5fa
[2/5] scsi: No retries on abort success
      https://git.kernel.org/mkp/scsi/c/60bee27ba2df
[3/5] scsi_transport_fc: Added a new rport state FC_PORTSTATE_MARGINAL
      https://git.kernel.org/mkp/scsi/c/02c66326dc7e
[4/5] scsi_transport_fc: Added store fucntionality to set the rport port_state using sysfs
      https://git.kernel.org/mkp/scsi/c/afdd11269400
[5/5] scsi:lpfc: Added support for eh_should_retry_cmd
      https://git.kernel.org/mkp/scsi/c/7f3a79a7fd51
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering