Skip to contentSkip to conversation

board/sifive: Update defconfig and genimage config files

PATCH New Bin Meng 3 participants 11 messages Jan 11, 2021 – Jan 26, 2021 SiFive drivers

lore
Share & tools
lore

Bin Meng

author
#0 lore raw

cover board/sifive: Update defconfig and genimage config files

At present an out-of-tree Linux kernel is being used for SiFive HiFive Unleashed Buildroot configuration. As the upstream Linux kernel evolves it is time to switch to the official Linux kernel tree for this board.

We also switch to use the upstream U-Boot as the bootloader, that provides the ZSBL => U-Boot SPL => OpenSBI dynamic + U-Boot proper boot flow. As the upstream U-Boot supports booting from both SD card and SPI flash, two genimage configuration files are provided to generate corresponding image, as well as a boot cript.

A new config option BR2_TARGET_UBOOT_NEEDS_OPENSBI is introduced to build RISC-V U-Boot that requires OpenSBI.

Bin Meng (2):
boot/uboot: Introduce BR2_TARGET_UBOOT_NEEDS_OPENSBI board/sifive: Update hifive_unleashed_defconfig and genimage.cfg

 board/sifive/hifive-unleashed/boot.cmd             |  4 ++
 .../{genimage.cfg => genimage_sdcard.cfg}          | 14 +++--
 board/sifive/hifive-unleashed/genimage_spi-nor.cfg | 25 ++++++++
 .../sifive/hifive-unleashed/linux.config.fragment  | 14 ++---
 board/sifive/hifive-unleashed/post-build.sh        |  2 +
 board/sifive/hifive-unleashed/readme.txt           | 68 +++++++++++++++++-----
 boot/uboot/Config.in                               | 10 ++++
 boot/uboot/uboot.mk                                |  5 ++
 configs/hifive_unleashed_defconfig                 | 32 +++++++---
 9 files changed, 138 insertions(+), 36 deletions(-)
 create mode 100644 board/sifive/hifive-unleashed/boot.cmd
 rename board/sifive/hifive-unleashed/{genimage.cfg => genimage_sdcard.cfg} (51%)
 create mode 100644 board/sifive/hifive-unleashed/genimage_spi-nor.cfg
 create mode 100755 board/sifive/hifive-unleashed/post-build.sh
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 1/2 boot/uboot: Introduce BR2_TARGET_UBOOT_NEEDS_OPENSBI

From: Bin Meng <[email protected]>

Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate the OpenSBI firmware image inside U-Boot.

---

 boot/uboot/Config.in | 10 ++++++++++
 boot/uboot/uboot.mk  |  5 +++++
 2 files changed, 15 insertions(+)
boot/uboot/Config.in +10 -0
index e4a0f48..b18216a 100644
@@ -229,6 +229,16 @@ config BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF
 
 endchoice
 
+config BR2_TARGET_UBOOT_NEEDS_OPENSBI
+	bool "U-Boot needs OpenSBI"
+	depends on BR2_TARGET_OPENSBI
+	help
+	  Some RISC-V platforms (such as SiFive HiFive Unleashed)
+	  encapsulate the OpenSBI firmware image inside U-Boot.
+	  This option makes sure OpenSBI gets built prior to U-Boot,
+	  and that the OpenSBI variable pointing to OpenSBI binary,
+	  is passed during the Buildroot build.
+
 menu "U-Boot binary format"
 
 config BR2_TARGET_UBOOT_FORMAT_AIS
boot/uboot/uboot.mk +5 -0
index a29d71f..d92000f 100644
@@ -163,6 +163,11 @@ UBOOT_MAKE_OPTS += BL31=$(BINARIES_DIR)/bl31.bin
 endif
 endif
 
+ifeq ($(BR2_TARGET_UBOOT_NEEDS_OPENSBI),y)
+UBOOT_DEPENDENCIES += opensbi
+UBOOT_MAKE_OPTS += OPENSBI=$(BINARIES_DIR)/fw_dynamic.bin
+endif
+
 ifeq ($(BR2_TARGET_UBOOT_NEEDS_DTC),y)
 UBOOT_DEPENDENCIES += host-dtc
 endif
Signature · 1 line
2.7.4
#2 lore raw

PATCH 1/2 boot/uboot: Introduce BR2_TARGET_UBOOT_NEEDS_OPENSBI

Quoted 7 lines · Bin Meng

From: Bin Meng <[email protected]>

Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate the OpenSBI firmware image inside U-Boot.

Alistair

Quoted 50 lines

---

 boot/uboot/Config.in | 10 ++++++++++
 boot/uboot/uboot.mk  |  5 +++++
 2 files changed, 15 insertions(+)
boot/uboot/Config.in +10 -0
index e4a0f48..b18216a 100644
@@ -229,6 +229,16 @@ config BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF
 
 endchoice
 
+config BR2_TARGET_UBOOT_NEEDS_OPENSBI
+       bool "U-Boot needs OpenSBI"
+       depends on BR2_TARGET_OPENSBI
+       help
+         Some RISC-V platforms (such as SiFive HiFive Unleashed)
+         encapsulate the OpenSBI firmware image inside U-Boot.
+         This option makes sure OpenSBI gets built prior to U-Boot,
+         and that the OpenSBI variable pointing to OpenSBI binary,
+         is passed during the Buildroot build.
+
 menu "U-Boot binary format"
 
 config BR2_TARGET_UBOOT_FORMAT_AIS
boot/uboot/uboot.mk +5 -1
index a29d71f..d92000f 100644
@@ -163,6 +163,11 @@ UBOOT_MAKE_OPTS += BL31=$(BINARIES_DIR)/bl31.bin
 endif
 endif
 
+ifeq ($(BR2_TARGET_UBOOT_NEEDS_OPENSBI),y)
+UBOOT_DEPENDENCIES += opensbi
+UBOOT_MAKE_OPTS += OPENSBI=$(BINARIES_DIR)/fw_dynamic.bin
+endif
+
 ifeq ($(BR2_TARGET_UBOOT_NEEDS_DTC),y)
 UBOOT_DEPENDENCIES += host-dtc
 endif
--

2.7.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#4 lore raw

PATCH 1/2 boot/uboot: Introduce BR2_TARGET_UBOOT_NEEDS_OPENSBI

In reply to Bin Meng
Quoted 7 lines · On Mon, 11 Jan 2021 17:01:11 +0800 Bin Meng <[email protected]> wrote:

From: Bin Meng <[email protected]>

Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate the OpenSBI firmware image inside U-Boot.

---

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
author
#5 lore raw

PATCH 2/2 board/sifive: Update hifive_unleashed_defconfig and genimage.cfg

In reply to Bin Meng

From: Bin Meng <[email protected]>

Update to use the official linux kernel instead of an out-of-tree kernel, and use the official U-Boot as the bootloader. Provide two configuration files of genimage for different boot flows:

- Boot from SD card (default)
- Boot from SPI flash

A boot script is generated to automatically boot the distro.

---

 board/sifive/hifive-unleashed/boot.cmd             |  4 ++
 .../{genimage.cfg => genimage_sdcard.cfg}          | 14 +++--
 board/sifive/hifive-unleashed/genimage_spi-nor.cfg | 25 ++++++++
 .../sifive/hifive-unleashed/linux.config.fragment  | 14 ++---
 board/sifive/hifive-unleashed/post-build.sh        |  2 +
 board/sifive/hifive-unleashed/readme.txt           | 68 +++++++++++++++++-----
 configs/hifive_unleashed_defconfig                 | 32 +++++++---
 7 files changed, 123 insertions(+), 36 deletions(-)
 create mode 100644 board/sifive/hifive-unleashed/boot.cmd
 rename board/sifive/hifive-unleashed/{genimage.cfg => genimage_sdcard.cfg} (51%)
 create mode 100644 board/sifive/hifive-unleashed/genimage_spi-nor.cfg
 create mode 100755 board/sifive/hifive-unleashed/post-build.sh
board/sifive/hifive-unleashed/boot.cmd new file +4 -0
new file mode 100644
index 0000000..deaedef
@@ -0,0 +1,4 @@
+setenv bootargs earlycon=sbi root=/dev/mmcblk0p3 rootwait
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} boot/Image
+load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} boot/hifive-unleashed-a00.dtb
+booti ${kernel_addr_r} - ${fdt_addr_r}
board/sifive/hifive-unleashed/genimage_sdcard.cfg renamed from board/sifive/hifive-unleashed/genimage.cfg +10 -4
similarity index 51%
rename from board/sifive/hifive-unleashed/genimage.cfg
rename to board/sifive/hifive-unleashed/genimage_sdcard.cfg
index 8eebc52..e7f98a4 100644
@@ -3,15 +3,21 @@ image sdcard.img {
 		gpt = true
 	}
 
-	partition bootloader {
-		image = "fw_payload.bin"
-		offset = 1M
-		size = 32M
+	partition u-boot-spl {
+		image = "u-boot-spl.bin"
+		offset = 17K
+		partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
+	}
+
+	partition u-boot {
+		image = "u-boot.itb"
+		offset = 1041K
 		partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
 	}
 
 	partition rootfs {
 		image = "rootfs.ext4"
 		partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+		bootable = true
 	}
 }
board/sifive/hifive-unleashed/genimage_spi-nor.cfg new file +25 -0
new file mode 100644
index 0000000..7f90997
@@ -0,0 +1,25 @@
+image spi-nor.img {
+	size = 32M
+
+	hdimage {
+		gpt = true
+	}
+
+	partition u-boot-spl {
+		image = "u-boot-spl.bin"
+		offset = 20K
+		partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
+	}
+
+	partition u-boot {
+		image = "u-boot.itb"
+		offset = 1044K
+		partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
+	}
+
+	partition rootfs {
+		image = "rootfs.ext4"
+		partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+		bootable = true
+	}
+}
board/sifive/hifive-unleashed/linux.config.fragment +4 -10
index f4f3840..385a961 100644
@@ -1,16 +1,10 @@
 CONFIG_HZ_100=y
-CONFIG_CMDLINE="earlycon=sbi root=/dev/mmcblk0p2 rootwait"
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SERIAL_SIFIVE=y
-CONFIG_SERIAL_SIFIVE_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_SIFIVE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_SIFIVE=y
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_CLK_U54_PRCI=y
-CONFIG_CLK_GEMGXL_MGMT=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_PWM=y
 CONFIG_PWM_SIFIVE=y
board/sifive/hifive-unleashed/post-build.sh new file +2 -0
new file mode 100755
index 0000000..b418120
@@ -0,0 +1,2 @@
+#!/bin/sh
+cp $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr
board/sifive/hifive-unleashed/readme.txt +54 -14

100 lines not on this page · raw message

configs/hifive_unleashed_defconfig +24 -8
index 2457657..d93920c 100644
@@ -12,29 +12,45 @@ BR2_RISCV_ABI_LP64D=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_GENERIC_GETTY=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttySIF0"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/sifive/hifive-unleashed/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sifive/hifive-unleashed/genimage.cfg"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sifive/hifive-unleashed/genimage_sdcard.cfg"
 
 # Filesystem
+BR2_TARGET_ROOTFS_CPIO=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="24M"
 
-# Linux headers same as kernel, a 5.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
+# Linux headers same as kernel, a 5.10 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/alistair23/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="hifive-unleashed-5.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sifive/hifive-unleashed/linux.config.fragment"
 BR2_LINUX_KERNEL_IMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sifive/hifive-unleashed-a00"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
 
 # Bootloader
 BR2_TARGET_OPENSBI=y
-BR2_TARGET_OPENSBI_PLAT="sifive/fu540"
-BR2_TARGET_OPENSBI_LINUX_PAYLOAD=y
+BR2_TARGET_OPENSBI_PLAT="generic"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sifive_fu540"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_SPL=y
 
 # Host tools
 BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/sifive/hifive-unleashed/boot.cmd"
Signature · 1 line
2.7.4
#6 lore raw

PATCH 2/2 board/sifive: Update hifive_unleashed_defconfig and genimage.cfg

Quoted 7 lines · Bin Meng

From: Bin Meng <[email protected]>

Update to use the official linux kernel instead of an out-of-tree kernel, and use the official U-Boot as the bootloader. Provide two configuration files of genimage for different boot flows:

Quoted 6 lines

- Boot from SD card (default)
- Boot from SPI flash

A boot script is generated to automatically boot the distro.

Alistair

Quoted 293 lines

---

 board/sifive/hifive-unleashed/boot.cmd             |  4 ++
 .../{genimage.cfg => genimage_sdcard.cfg}          | 14 +++--
 board/sifive/hifive-unleashed/genimage_spi-nor.cfg | 25 ++++++++
 .../sifive/hifive-unleashed/linux.config.fragment  | 14 ++---
 board/sifive/hifive-unleashed/post-build.sh        |  2 +
 board/sifive/hifive-unleashed/readme.txt           | 68 +++++++++++++++++-----
 configs/hifive_unleashed_defconfig                 | 32 +++++++---
 7 files changed, 123 insertions(+), 36 deletions(-)
 create mode 100644 board/sifive/hifive-unleashed/boot.cmd
 rename board/sifive/hifive-unleashed/{genimage.cfg => genimage_sdcard.cfg} (51%)
 create mode 100644 board/sifive/hifive-unleashed/genimage_spi-nor.cfg
 create mode 100755 board/sifive/hifive-unleashed/post-build.sh
board/sifive/hifive-unleashed/boot.cmd new file +4 -0
new file mode 100644
index 0000000..deaedef
@@ -0,0 +1,4 @@
+setenv bootargs earlycon=sbi root=/dev/mmcblk0p3 rootwait
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} boot/Image
+load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} boot/hifive-unleashed-a00.dtb
+booti ${kernel_addr_r} - ${fdt_addr_r}
board/sifive/hifive-unleashed/genimage_sdcard.cfg renamed from board/sifive/hifive-unleashed/genimage.cfg +10 -4
similarity index 51%
rename from board/sifive/hifive-unleashed/genimage.cfg
rename to board/sifive/hifive-unleashed/genimage_sdcard.cfg
index 8eebc52..e7f98a4 100644
@@ -3,15 +3,21 @@ image sdcard.img {
                gpt = true
        }
 
-       partition bootloader {
-               image = "fw_payload.bin"
-               offset = 1M
-               size = 32M
+       partition u-boot-spl {
+               image = "u-boot-spl.bin"
+               offset = 17K
+               partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
+       }
+
+       partition u-boot {
+               image = "u-boot.itb"
+               offset = 1041K
                partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
        }
 
        partition rootfs {
                image = "rootfs.ext4"
                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+               bootable = true
        }
 }
board/sifive/hifive-unleashed/genimage_spi-nor.cfg new file +25 -0
new file mode 100644
index 0000000..7f90997
@@ -0,0 +1,25 @@
+image spi-nor.img {
+       size = 32M
+
+       hdimage {
+               gpt = true
+       }
+
+       partition u-boot-spl {
+               image = "u-boot-spl.bin"
+               offset = 20K
+               partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
+       }
+
+       partition u-boot {
+               image = "u-boot.itb"
+               offset = 1044K
+               partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
+       }
+
+       partition rootfs {
+               image = "rootfs.ext4"
+               partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+               bootable = true
+       }
+}
board/sifive/hifive-unleashed/linux.config.fragment +4 -10
index f4f3840..385a961 100644
@@ -1,16 +1,10 @@
 CONFIG_HZ_100=y
-CONFIG_CMDLINE="earlycon=sbi root=/dev/mmcblk0p2 rootwait"
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SERIAL_SIFIVE=y
-CONFIG_SERIAL_SIFIVE_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_SIFIVE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_SIFIVE=y
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_CLK_U54_PRCI=y
-CONFIG_CLK_GEMGXL_MGMT=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_PWM=y
 CONFIG_PWM_SIFIVE=y
board/sifive/hifive-unleashed/post-build.sh new file +2 -0
new file mode 100755
index 0000000..b418120
@@ -0,0 +1,2 @@
+#!/bin/sh
+cp $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr
board/sifive/hifive-unleashed/readme.txt +54 -14
index 8d3fa63..3263913 100644
@@ -28,30 +28,41 @@ Result of the build
 Once the build has finished you will have the following files:
 
     output/images/
+    +-- boot.scr
+    +-- fw_dynamic.bin
+    +-- fw_dynamic.elf
     +-- fw_jump.bin
     +-- fw_jump.elf
-    +-- fw_payload.bin
-    +-- fw_payload.elf
+    +-- hifive-unleashed-a00.dtb
     +-- Image
+    +-- rootfs.cpio
     +-- rootfs.ext2
     +-- rootfs.ext4
     +-- rootfs.tar
     +-- sdcard.img
+    +-- u-boot.bin
+    +-- u-boot.itb
+    +-- u-boot-spl.bin
 
 
 Creating a bootable SD card with genimage
 =========================================
 
-Buildroot builds a SD card image for you. All you need to do is dd the
-image to your SD card, which can be done with the following command:
+By default Buildroot builds a SD card image for you. All you need to do
+is dd the image to your SD card, which can be done with the following
+command on your development host:
 
-  $ sudo dd if=output/images/sdcard.img of=/dev/mmcblk0 bs=4096
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdb bs=4096
+
+The above example command assumes the SD card is accessed via a USB card
+reader and shows up as /dev/sdb on the host. Adjust it accordingly per
+your actual setup.
 
 Booting the SD card on the board
 ================================
 
 Make sure that the all DIP switches are set to the off position for
-default boot mode (MSEL mode = 1111), insert the SD card and power
+default boot mode (MSEL mode = 1011), insert the SD card and power
 up the board.
 
 Connect the USB cable and open minicom (/dev/ttyUSB1, 115200, 8N1).
@@ -60,16 +71,45 @@ See the 'SiFive HiFive Unleashed Getting Started Guide' for
 more details (https://www.sifive.com/documentation).
 
 You will get a warning reported by fdisk when you examine the SD card.
-This is because the genimage.cfg file doesn't specify the SD card size
-(as people will naturally have different sized cards), so the
+This is because the genimage_sdcard.cfg file doesn't specify the SD card
+size (as people will naturally have different sized cards), so the
 secondary GPT header is placed after the rootfs rather than at the end
 of the disk where it is expected to be.
 
 You will see something like this at boot time:
 
-[    2.318722] GPT:Primary header thinks Alt. header is not at the end of the disk.
-[    2.325390] GPT:190496 != 122142719
-[    2.328843] GPT:Alternate GPT header not at the end of the disk.
-[    2.334824] GPT:190496 != 122142719
-[    2.338302] GPT: Use GNU Parted to correct GPT errors.
-[    2.343456]  mmcblk0: p1 p2
+[    0.989458] mmc0: host does not support reading read-only switch, assuming write-enable
+[    0.996772] mmc0: new SDHC card on SPI
+[    1.001634] mmcblk0: mmc0:0000 SD8GB 7.28 GiB
+[    1.038079] GPT:Primary header thinks Alt. header is not at the end of the disk.
+[    1.044759] GPT:52389 != 15264767
+[    1.048051] GPT:Alternate GPT header not at the end of the disk.
+[    1.054015] GPT:52389 != 15264767
+[    1.057323] GPT: Use GNU Parted to correct GPT errors.
+[    1.062479]  mmcblk0: p1 p2 p3
+
+
+Creating a bootable SPI flash with genimage
+===========================================
+
+Adjust Buildroot configuration by:
+
+  $ make menuconfig
+
+Change "System configuration" -> "Extra arguments passed to custom scripts"
+value to "-c board/sifive/hifive-unleashed/genimage_spi-nor.cfg", save the
+configuration and build. This creates a output/images/spi-nor.img that can
+be programmed to the on-board SPI flash.
+
+Boot the board from the SD card prepared above, stop the U-Boot auto boot,
+and type the following commands to program the whole SPI flash:
+
+  => tftp 82000000 output/images/spi-nor.img
+  => sf probe
+  => sf update 82000000 0 2000000
+
+Booting the SPI flash on the board
+==================================
+
+Make sure that the all DIP switches are set to the off position for
+default boot mode (MSEL mode = 0110) to boot from SPI flash.
configs/hifive_unleashed_defconfig +24 -9
index 2457657..d93920c 100644
@@ -12,29 +12,45 @@ BR2_RISCV_ABI_LP64D=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_GENERIC_GETTY=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttySIF0"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/sifive/hifive-unleashed/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sifive/hifive-unleashed/genimage.cfg"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sifive/hifive-unleashed/genimage_sdcard.cfg"
 
 # Filesystem
+BR2_TARGET_ROOTFS_CPIO=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="24M"
 
-# Linux headers same as kernel, a 5.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
+# Linux headers same as kernel, a 5.10 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/alistair23/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="hifive-unleashed-5.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sifive/hifive-unleashed/linux.config.fragment"
 BR2_LINUX_KERNEL_IMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sifive/hifive-unleashed-a00"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
 
 # Bootloader
 BR2_TARGET_OPENSBI=y
-BR2_TARGET_OPENSBI_PLAT="sifive/fu540"
-BR2_TARGET_OPENSBI_LINUX_PAYLOAD=y
+BR2_TARGET_OPENSBI_PLAT="generic"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sifive_fu540"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_SPL=y
 
 # Host tools
 BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/sifive/hifive-unleashed/boot.cmd"
--

2.7.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#7 lore raw

PATCH 2/2 board/sifive: Update hifive_unleashed_defconfig and genimage.cfg

In reply to Bin Meng

Hello Bin,

Quoted 21 lines · On Mon, 11 Jan 2021 17:01:12 +0800 Bin Meng <[email protected]> wrote:
board/sifive/hifive-unleashed/genimage_spi-nor.cfg new file +15 -0
new file mode 100644
index 0000000..7f90997
@@ -0,0 +1,25 @@
+image spi-nor.img {
+	size = 32M
+
+	hdimage {
+		gpt = true
+	}
+
+	partition u-boot-spl {
+		image = "u-boot-spl.bin"
+		offset = 20K
+		partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
+	}
+
+	partition u-boot {
+		image = "u-boot.itb"

board/sifive/hifive-unleashed/genimage_spi-nor.cfg line 25

Quoted 10 lines
board/sifive/hifive-unleashed/genimage_spi-nor.cfg new file +10 -0
+		offset = 1044K
+		partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
+	}
+
+	partition rootfs {
+		image = "rootfs.ext4"
+		partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+		bootable = true
+	}
+}

This looks strange. You really use a GPT partition table on SPI flash, and use an ext4 filesystem on a SPI flash ?

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
author
#8 lore raw

PATCH 2/2 board/sifive: Update hifive_unleashed_defconfig and genimage.cfg

Hi Thomas,

Quoted 32 lines · Thomas Petazzoni

Hello Bin,

Quoted 26 lines · On Mon, 11 Jan 2021 17:01:12 +0800 Bin Meng <[email protected]> wrote:
board/sifive/hifive-unleashed/genimage_spi-nor.cfg new file +20 -0
new file mode 100644
index 0000000..7f90997
@@ -0,0 +1,25 @@
+image spi-nor.img {
+     size = 32M
+
+     hdimage {
+             gpt = true
+     }
+
+     partition u-boot-spl {
+             image = "u-boot-spl.bin"
+             offset = 20K
+             partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
+     }
+
+     partition u-boot {
+             image = "u-boot.itb"
+             offset = 1044K
+             partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
+     }
+
+     partition rootfs {
Quoted 9 lines

board/sifive/hifive-unleashed/genimage_spi-nor.cfg line 25

Quoted 5 lines
board/sifive/hifive-unleashed/genimage_spi-nor.cfg new file +5 -0
+             image = "rootfs.ext4"
+             partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+             bootable = true
+     }
+}

This looks strange. You really use a GPT partition table on SPI flash, and use an ext4 filesystem on a SPI flash ?

When booting from SPI flash, the GPT partition is required by the ZSBL on the board to load U-Boot SPL images. The kernel still uses ext4 on the SD card as the rootfs. The SPI flash is just the backup for the rootfs.

Regards,
Bin

#9 lore raw

PATCH 2/2 board/sifive: Update hifive_unleashed_defconfig and genimage.cfg

Hello,

Quoted 7 lines · On Sun, 17 Jan 2021 18:28:11 +0800 Bin Meng <[email protected]> wrote:
Quoted 7 lines
Quoted 6 lines
board/sifive/hifive-unleashed/genimage_spi-nor.cfg new file +6 -0
+     partition rootfs {
+             image = "rootfs.ext4"
+             partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+             bootable = true
+     }
+}  
Quoted 8 lines
Quoted 3 lines

This looks strange. You really use a GPT partition table on SPI flash, and use an ext4 filesystem on a SPI flash ?

When booting from SPI flash, the GPT partition is required by the ZSBL on the board to load U-Boot SPL images. The kernel still uses ext4 on the SD card as the rootfs. The SPI flash is just the backup for the rootfs.

Then why does your SPI flash image contains a root filesystem partition ?

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
author
#10 lore raw

PATCH 2/2 board/sifive: Update hifive_unleashed_defconfig and genimage.cfg

Quoted 17 lines · Thomas Petazzoni

Hello,

Quoted 11 lines · On Sun, 17 Jan 2021 18:28:11 +0800 Bin Meng <[email protected]> wrote:
Quoted 10 lines

board/sifive/hifive-unleashed/genimage_spi-nor.cfg line 25

Quoted 6 lines
board/sifive/hifive-unleashed/genimage_spi-nor.cfg new file +6 -0
+     partition rootfs {
+             image = "rootfs.ext4"
+             partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+             bootable = true
+     }
+}

This looks strange. You really use a GPT partition table on SPI flash, and use an ext4 filesystem on a SPI flash ?

Quoted 6 lines
Quoted 4 lines

When booting from SPI flash, the GPT partition is required by the ZSBL on the board to load U-Boot SPL images. The kernel still uses ext4 on the SD card as the rootfs. The SPI flash is just the backup for the rootfs.

Then why does your SPI flash image contains a root filesystem partition ?

As I mentioned I meant to have a backup in SPI flash for recovery. Since this is causing confusion, I can remove this configuration completely in v2.

Regards,
Bin