arm64: dts: qcom: sm8150: Add support for deep CPU cluster idle
PATCH 1/1 arm64: dts: qcom: sm8150: Add support for deep CPU cluster idle
This commit adds support for deep idling of the entire unified DynamIQ CPU cluster on sm8150. In this idle state, the LLCC (Last-Level Cache Controller) is powered off and the AOP (Always-On Processor) enters a low-power sleep state.
I'm not sure what the per-CPU 0x400000f4 idle state previously contributed by Qualcomm as the "cluster sleep" state is, but the downstream kernel has no such state. The real deep cluster idle state is 0x41000c244, composed of:
Cluster idle state: (0xc24) << 4 = 0xc240
Is reset state: 1 << 30 = 0x40000000
Affinity level: 1 << 24 = 0x1000000
CPU idle state: 0x4 (power collapse)This setup can be replicated with the PSCI power domain cpuidle driver, which utilizes OSI to enter cluster idle when the last active CPU enters idle.
The cluster idle state cannot be used as a plain cpuidle state because it requires that all CPUs in the cluster are idling.
--- arch/arm64/boot/dts/qcom/sm8150.dtsi | 91 ++++++++++++++++++++++------ 1 file changed, 73 insertions(+), 18 deletions(-)
arch/arm64/boot/dts/qcom/sm8150.dtsi +73 -18
@@ -52,10 +52,10 @@ CPU0: cpu@0 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache";
@@ -73,10 +73,10 @@ CPU1: cpu@100 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache";
@@ -92,10 +92,10 @@ CPU2: cpu@200 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache";
@@ -110,10 +110,10 @@ CPU3: cpu@300 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache";
@@ -128,10 +128,10 @@ CPU4: cpu@400 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache";
@@ -146,10 +146,10 @@ CPU5: cpu@500 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache";
@@ -164,10 +164,10 @@ CPU6: cpu@600 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache";
@@ -182,10 +182,10 @@ CPU7: cpu@700 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <421>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache";
@@ -251,11 +251,13 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { min-residency-us = <4488>; local-timer-stop; }; + }; + domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; idle-state-name = "cluster-power-collapse"; - arm,psci-suspend-param = <0x400000F4>; + arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>;
@@ -291,6 +293,59 @@ pmu { psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved-memory {
Signature · 1 line
2.29.2
Quoted 15 lines · Danny Lin
This commit adds support for deep idling of the entire unified DynamIQ CPU cluster on sm8150. In this idle state, the LLCC (Last-Level Cache Controller) is powered off and the AOP (Always-On Processor) enters a low-power sleep state.
I'm not sure what the per-CPU
0x400000f4idle state previously contributed by Qualcomm as the "cluster sleep" state is, but the downstream kernel has no such state. The real deep cluster idle state is0x41000c244, composed of:Cluster idle state: (0xc24) << 4 = 0xc240 Is reset state: 1 << 30 = 0x40000000 Affinity level: 1 << 24 = 0x1000000 CPU idle state: 0x4 (power collapse)
Quoted 7 lines
This setup can be replicated with the PSCI power domain cpuidle driver, which utilizes OSI to enter cluster idle when the last active CPU enters idle.
The cluster idle state cannot be used as a plain cpuidle state because it requires that all CPUs in the cluster are idling.
This looks quite reasonable to me.
@Ulf, this seems to be the first attempt at wiring up the domain idle pieces upstream, would you mind having a look?
The SM8150 pretty much identical to RB3 in this regard.
Regards,
Bjorn
Quoted 192 lines
Signed-off-by Danny Lin <[email protected]>--- arch/arm64/boot/dts/qcom/sm8150.dtsi | 91 ++++++++++++++++++++++------ 1 file changed, 73 insertions(+), 18 deletions(-)arch/arm64/boot/dts/qcom/sm8150.dtsi +73
-18@@ -52,10 +52,10 @@ CPU0: cpu@0 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache";@@ -73,10 +73,10 @@ CPU1: cpu@100 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache";@@ -92,10 +92,10 @@ CPU2: cpu@200 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache";@@ -110,10 +110,10 @@ CPU3: cpu@300 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache";@@ -128,10 +128,10 @@ CPU4: cpu@400 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache";@@ -146,10 +146,10 @@ CPU5: cpu@500 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache";@@ -164,10 +164,10 @@ CPU6: cpu@600 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache";@@ -182,10 +182,10 @@ CPU7: cpu@700 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <421>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache";@@ -251,11 +251,13 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { min-residency-us = <4488>; local-timer-stop; }; + }; + domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; idle-state-name = "cluster-power-collapse"; - arm,psci-suspend-param = <0x400000F4>; + arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>;@@ -291,6 +293,59 @@ pmu { psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved-memory {Signature · 1 line
2.29.2
+ Lina
Quoted 22 lines · Bjorn Andersson
Quoted 19 lines · Danny Lin
This commit adds support for deep idling of the entire unified DynamIQ CPU cluster on sm8150. In this idle state, the LLCC (Last-Level Cache Controller) is powered off and the AOP (Always-On Processor) enters a low-power sleep state.
I'm not sure what the per-CPU
0x400000f4idle state previously contributed by Qualcomm as the "cluster sleep" state is, but the downstream kernel has no such state. The real deep cluster idle state is0x41000c244, composed of:Cluster idle state: (0xc24) << 4 = 0xc240 Is reset state: 1 << 30 = 0x40000000 Affinity level: 1 << 24 = 0x1000000 CPU idle state: 0x4 (power collapse)This setup can be replicated with the PSCI power domain cpuidle driver, which utilizes OSI to enter cluster idle when the last active CPU enters idle.
Quoted 8 lines
Quoted 3 lines
The cluster idle state cannot be used as a plain cpuidle state because it requires that all CPUs in the cluster are idling.
This looks quite reasonable to me.
@Ulf, this seems to be the first attempt at wiring up the domain idle pieces upstream, would you mind having a look?
Certainly I can have a look, but I could find the original posted patch. I had a look at the below changes and it looks good to me. Feel free to add my reviewed-by tag for it.
Also note, the db410c was the first one to support this as introduced in commit e37131556801 for v5.6. You may have a look at arch/arm64/boot/dts/qcom/msm8916.dtsi.
Kind regards
Uffe
Quoted 198 lines
The SM8150 pretty much identical to RB3 in this regard.
Regards,
BjornQuoted 192 lines
Signed-off-by Danny Lin <[email protected]>--- arch/arm64/boot/dts/qcom/sm8150.dtsi | 91 ++++++++++++++++++++++------ 1 file changed, 73 insertions(+), 18 deletions(-)arch/arm64/boot/dts/qcom/sm8150.dtsi +73
-19@@ -52,10 +52,10 @@ CPU0: cpu@0 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache";@@ -73,10 +73,10 @@ CPU1: cpu@100 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache";@@ -92,10 +92,10 @@ CPU2: cpu@200 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache";@@ -110,10 +110,10 @@ CPU3: cpu@300 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache";@@ -128,10 +128,10 @@ CPU4: cpu@400 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache";@@ -146,10 +146,10 @@ CPU5: cpu@500 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache";@@ -164,10 +164,10 @@ CPU6: cpu@600 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache";@@ -182,10 +182,10 @@ CPU7: cpu@700 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <421>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache";@@ -251,11 +251,13 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { min-residency-us = <4488>; local-timer-stop; }; + }; + domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; idle-state-name = "cluster-power-collapse"; - arm,psci-suspend-param = <0x400000F4>; + arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>;@@ -291,6 +293,59 @@ pmu { psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved-memory { --2.29.2
Quoted 29 lines · Ulf Hansson
+ Lina
Quoted 26 lines · Bjorn Andersson
Quoted 22 lines · Danny Lin
This commit adds support for deep idling of the entire unified DynamIQ CPU cluster on sm8150. In this idle state, the LLCC (Last-Level Cache Controller) is powered off and the AOP (Always-On Processor) enters a low-power sleep state.
I'm not sure what the per-CPU
0x400000f4idle state previously contributed by Qualcomm as the "cluster sleep" state is, but the downstream kernel has no such state. The real deep cluster idle state is0x41000c244, composed of:Cluster idle state: (0xc24) << 4 = 0xc240 Is reset state: 1 << 30 = 0x40000000 Affinity level: 1 << 24 = 0x1000000 CPU idle state: 0x4 (power collapse)This setup can be replicated with the PSCI power domain cpuidle driver, which utilizes OSI to enter cluster idle when the last active CPU enters idle.
The cluster idle state cannot be used as a plain cpuidle state because it requires that all CPUs in the cluster are idling.
Quoted 9 lines
Quoted 4 lines
This looks quite reasonable to me.
@Ulf, this seems to be the first attempt at wiring up the domain idle pieces upstream, would you mind having a look?
Certainly I can have a look, but I could find the original posted patch. I had a look at the below changes and it looks good to me. Feel free to add my reviewed-by tag for it.
Thank you.
Quoted 4 lines
Also note, the db410c was the first one to support this as introduced in commit
e37131556801for v5.6. You may have a look atarch/arm64/boot/dts/qcom/msm8916.dtsi.
For some reason I failed to find that commit while looking for your work on the subject, thanks for pointing it out!
Regards,
Bjorn
Quoted 201 lines
Kind regards
UffeQuoted 198 lines
The SM8150 pretty much identical to RB3 in this regard.
Regards,
BjornQuoted 192 lines
Signed-off-by Danny Lin <[email protected]>--- arch/arm64/boot/dts/qcom/sm8150.dtsi | 91 ++++++++++++++++++++++------ 1 file changed, 73 insertions(+), 18 deletions(-)arch/arm64/boot/dts/qcom/sm8150.dtsi +73
-19@@ -52,10 +52,10 @@ CPU0: cpu@0 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache";@@ -73,10 +73,10 @@ CPU1: cpu@100 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache";@@ -92,10 +92,10 @@ CPU2: cpu@200 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache";@@ -110,10 +110,10 @@ CPU3: cpu@300 { enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache";@@ -128,10 +128,10 @@ CPU4: cpu@400 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache";@@ -146,10 +146,10 @@ CPU5: cpu@500 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache";@@ -164,10 +164,10 @@ CPU6: cpu@600 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache";@@ -182,10 +182,10 @@ CPU7: cpu@700 { enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <421>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache";@@ -251,11 +251,13 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { min-residency-us = <4488>; local-timer-stop; }; + }; + domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; idle-state-name = "cluster-power-collapse"; - arm,psci-suspend-param = <0x400000F4>; + arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>;@@ -291,6 +293,59 @@ pmu { psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved-memory { --2.29.2
This patch was applied to qcom/linux.git (refs/heads/for-next):
Hello:
This patch was applied to qcom/linux.git (refs/heads/for-next):
Quoted 11 lines · On Tue, 5 Jan 2021 12:10:00 -0800 you wrote:
This commit adds support for deep idling of the entire unified DynamIQ CPU cluster on sm8150. In this idle state, the LLCC (Last-Level Cache Controller) is powered off and the AOP (Always-On Processor) enters a low-power sleep state.
I'm not sure what the per-CPU
0x400000f4idle state previously contributed by Qualcomm as the "cluster sleep" state is, but the downstream kernel has no such state. The real deep cluster idle state is0x41000c244, composed of:[...]
Here is the summary with links:
- arm64: dts: qcom: sm8150: Add support for deep CPU cluster idle
https://git.kernel.org/qcom/c/b2e3f897684c
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html