arm64: dts: qcom: msm8916-samsung-a2015: Fix sensors
PATCH 1/1 arm64: dts: qcom: msm8916-samsung-a2015: Fix sensors
When the BMC150 accelerometer/magnetometer was added to the device tree, the sensors were working without specifying any regulator supplies, likely because the regulators were on by default and then never turned off.
For some reason, this is no longer the case for pm8916_l17, which prevents the sensors from working in some cases.
Now that the bmc150_accel/bmc150_magn drivers can enable necessary regulators, declare the necessary regulator supplies to make the sensors work again.
--- arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +6 -0
@@ -106,6 +106,9 @@ accelerometer: accelerometer@10 { interrupt-parent = <&msmgpio>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + pinctrl-names = "default"; pinctrl-0 = <&accel_int_default>; };
@@ -113,6 +116,9 @@ accelerometer: accelerometer@10 { magnetometer@12 { compatible = "bosch,bmc150_magn"; reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; }; };
Signature · 1 line
2.30.0
This patch was applied to qcom/linux.git (refs/heads/for-next):
Hello:
This patch was applied to qcom/linux.git (refs/heads/for-next):
Quoted 8 lines · On Mon, 11 Jan 2021 18:53:58 +0100 you wrote:
When the BMC150 accelerometer/magnetometer was added to the device tree, the sensors were working without specifying any regulator supplies, likely because the regulators were on by default and then never turned off.
For some reason, this is no longer the case for
pm8916_l17, which prevents the sensors from working in some cases.[...]
Here is the summary with links:
- arm64: dts: qcom: msm8916-samsung-a2015: Fix sensors
https://git.kernel.org/qcom/c/3716a583fe0b
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html