Skip to contentSkip to conversation

Booting on PX30

DISCUSSION Piotr Lobacz 1 participant 1 message Jan 24, 2021

lore
Share & tools
lore
#0 lore raw

Hi all,
In our company we have a board which was made for us by Liteon with PX30 chip on it. It boots with miniloader and uboot.img along with trust.img. The problem is that i wanted to boot it up using TPL/SPL images and it doesn't boot. With uboot source code which was given to us it prints for me just these lines:

U-Boot TPL 2017.09-g05c644bda3-dirty (Jan 23 2021 - 00:13:09) DDR V1.15 dll en dbg
D3,1024MB,333MHz

bw      col     bk      row     cs      dbw
32      10      8       15      1       16

OUT

The same is with the newest one

U-Boot TPL board init
DDR3, 333MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB out

And nothing else happens. Am i something missing? I'm sorry for a newbie question, but i have not a big experience in this matter.

Thanks for any help you can provide.

Regards,
Peter

--
Sent from: http://u-boot.10912.n7.nabble.com/