r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set

So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ is set and interrupt is shared, then free_irq() creates an "artificial" interrupt by calling the interrupt handler. The "link change" flag is set in the interrupt status register, causing phylib to eventually call phy_suspend(). Because the net_device is detached from the PHY already, the PHY driver can't recognize that WoL is configured and powers down the PHY.

---
 drivers/net/ethernet/realtek/r8169_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 4253d51a9..53c2079c7 100644
@@ -4667,10 +4667,10 @@ static int rtl8169_close(struct net_device *dev)
 
 	cancel_work_sync(&tp->wk.work);
 
-	phy_disconnect(tp->phydev);
-
 	free_irq(pci_irq_vector(pdev, 0), tp);
 
+	phy_disconnect(tp->phydev);
+
 	dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
 			  tp->RxPhyAddr);
 	dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,

2.30.0