Introduce dev-msi and interrupt message store
Subsystems (13)
cover Introduce dev-msi and interrupt message store
Provide support for device specific MSI implementations for devices which have their own resource management and interrupt chip. These devices are not related to PCI and contrary to platform MSI they do not share a common resource and interrupt chip. They provide their own domain specific resource management and interrupt chip.
On top of this, add support for Interrupt Message Store or IMS[1], which is a scalable device specific interrupt mechanism to support devices which may need more than 2048 interrupts. With IMS, there is theoretically no upper bound on the number of interrupts a device can support. The normal IMS use case is for guest usages but it can very well be used by host too.
Introduce a generic IMS irq chip and domain which stores the interrupt messages as an array in device memory. Allocation and freeing of interrupts happens via the generic msi_domain_alloc/free_irqs() interface. One only needs to ensure the interrupt domain is stored in the underlying device struct.
These patches can be divided into following steps:
1. X86 specific preparation for device MSI
x86/irq: Add DEV_MSI allocation type
x86/msi: Rename and rework pci_msi_prepare() to cover non-PCI MSI
2. Generic device MSI infrastructure
platform-msi: Provide default irq_chip:: Ack genirq/proc: Take buslock on affinity write genirq/msi: Provide and use msi_domain_set_default_info_flags()
platform-msi: Add device MSI infrastructure irqdomain/msi: Provide msi_alloc/free_store() callbacks
genirq: Set auxiliary data for an interrupt
3. Interrupt Message Store (IMS) irq domain/chip implementation for device array
irqchip: Add IMS (Interrupt Message Store) driver
iommu/vt-d: Add DEV-MSI support
4. Add platform check for subdevice irq domain
iommu: Add capability IOMMU_CAP_VIOMMU
platform-msi: Add platform check for subdevice irq domain
The device IMS (Interrupt Message Storage) should not be enabled in any virtualization environments unless there is a HYPERCALL domain which makes the changes in the message store monitored by the hypervisor.[2] As the initial step, we allow the IMS to be enabled only if we are running on the bare metal. It's easy to enable IMS in the virtualization environments if above preconditions are met in the future.
These patches have been tested with the IDXD driver:
https://github.com/intel/idxd-driver idxd-stage2.5
Most of these patches are originally by Thomas:
https://lore.kernel.org/linux-hyperv/[email protected]/
and are rebased on latest kernel
This patches series has undergone a lot of changes since first submitted as an RFC in September 2019. I have divided the changes into 3 stages for better understanding
Stage 1: Standalone RFC IMS series[3]
-------------------------------------
https://lore.kernel.org/lkml/[email protected]/
V1:
1. Extend existing platform-msi to support IMS
2. platform_msi_domain_alloc_irqs_group is introduced to allocate IMS interrupts, tagged with a group ID.
3. To free vectors of a particular group, platform_msi_domain_free_irqs_group API in introduced
Stage 2: dev-msi/IMS merged with Dave Jiang's IDXD series[2]
------------------------------------------------------------
V1: (changes from stage 1):
1. Introduced a new list for platform-msi descriptors
2. Introduced dynamic allocation for IMS interrupts
3. shifted creation of ims domain from arch/x86 to drivers/
4. Removed arch specific callbacks
5. Introduced enum platform_msi_type
6. Added more technical details to the cover letter
7. Merge common code between platform-msi.c and ims-msi.c
8. Introduce new structures platform_msi_ops and platform_msi_funcs
9. Addressed Andriy Shevchenko's comments on RFC V1 patch series
10. Dropped the dynamic group allocation scheme.
11. Use RCU lock instead of mutex lock to protect the device list
V2:
1. IMS made dev-msi
2. With recommendations from Jason/Thomas/Dan on making IMS more generic
3. Pass a non-pci generic device(struct device) for IMS management instead of mdev
4. Remove all references to mdev and symbol_get/put
5. Remove all references to IMS in common code and replace with dev-msi
6. Remove dynamic allocation of platform-msi interrupts: no groups,no new msi list or list helpers
7. Create a generic dev-msi domain with and without interrupt remapping enabled.
8. Introduce dev_msi_domain_alloc_irqs and dev_msi_domain_free_irqs apis
V3:
1. No need to add support for 2 different dev-msi irq domains, a common once can be used for both the cases(with IR enabled/disabled)
2. Add arch specific function to specify additions to msi_prepare callback instead of making the callback a weak function
3. Call platform ops directly instead of a wrapper function
4. Make mask/unmask callbacks as void functions
5. dev->msi_domain should be updated at the device driver level before calling dev_msi_alloc_irqs()
6. dev_msi_alloc/free_irqs() cannot be used for PCI devices
7. Followed the generic layering scheme: infrastructure bits->arch bits->enabling bits
V4:
1. Make interrupt remapping code more readable
2. Add flush writes to unmask/write and reset ims slots
3. Interrupt Message Storm-> Interrupt Message Store
4. Merge in pasid programming code.
Stage 3: Standalone dev-msi and IMS driver series
-------------------------------------------------
V1:(Changes from Stage 2 V4)
1. Split dev-msi/IMS code from Dave Jiang’s IDXD patch series
2. Set the source-id of all dev-msi interrupt requests to the parent PCI device
3. Separated core irq code from IMS related code
4. Added missing set_desc ops to the IMS msi_domain_ops
5. Added more details in the commit message-test case for auxillary interrupt data
6. Updated the copyright year from 2020 to 2021
7. Updated cover letter
8. Add platform check for subdevice irq domain (Lu Baolu):
V1->V2:
- V1 patches:[4]
- Rename probably_on_bare_metal() with on_bare_metal();
- Some vendors might use the same name for both bare metal and virtual environment. Before we add vendor specific code to distinguish between them, let's return false in on_bare_metal(). This won't introduce any regression. The only impact is that the coming new platform msi feature won't be supported until the vendor specific code is provided.
V2->V3:
- V2 patches:[5]
- Add all identified heuristics so far
[1]: https://software.intel.com/en-us/download/intel-scalable-io-virtualization-technical-specification
[2]: https://lore.kernel.org/dmaengine/160408357912.912050.17005584526266191420.stgit@djiang5-desk3.ch.intel.com/
[3]: https://lore.kernel.org/lkml/[email protected]/
[4]: https://lore.kernel.org/linux-pci/[email protected]/
[5]: https://lore.kernel.org/linux-pci/[email protected]/
Lu Baolu (2):
iommu: Add capability IOMMU_CAP_VIOMMU_HINT
platform-msi: Add platform check for subdevice irq domain
Megha Dey (2):
genirq: Set auxiliary data for an interrupt
iommu/vt-d: Add DEV-MSI support
Thomas Gleixner (8):
x86/irq: Add DEV_MSI allocation type
x86/msi: Rename and rework pci_msi_prepare() to cover non-PCI MSI
platform-msi: Provide default irq_chip:: Ack genirq/proc: Take buslock on affinity write genirq/msi: Provide and use msi_domain_set_default_info_flags()
platform-msi: Add device MSI infrastructure irqdomain/msi: Provide msi_alloc/free_store() callbacks
irqchip: Add IMS (Interrupt Message Store) driver
arch/x86/include/asm/hw_irq.h | 1 + arch/x86/include/asm/msi.h | 4 +- arch/x86/kernel/apic/msi.c | 27 +++-- arch/x86/pci/common.c | 74 +++++++++++++ drivers/base/platform-msi.c | 141 ++++++++++++++++++++++++ drivers/iommu/amd/iommu.c | 2 + drivers/iommu/intel/iommu.c | 20 ++++ drivers/iommu/intel/irq_remapping.c | 6 +- drivers/iommu/virtio-iommu.c | 9 ++ drivers/irqchip/Kconfig | 14 +++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-ims-msi.c | 211 ++++++++++++++++++++++++++++++++++++ drivers/pci/controller/pci-hyperv.c | 2 +- drivers/pci/msi.c | 7 +- include/linux/interrupt.h | 2 + include/linux/iommu.h | 2 + include/linux/irq.h | 4 + include/linux/irqchip/irq-ims-msi.h | 68 ++++++++++++ include/linux/irqdomain.h | 1 + include/linux/msi.h | 38 +++++++ kernel/irq/Kconfig | 4 + kernel/irq/manage.c | 38 ++++++- kernel/irq/msi.c | 35 ++++++ 23 files changed, 692 insertions(+), 19 deletions(-) create mode 100644 drivers/irqchip/irq-ims-msi.c create mode 100644 include/linux/irqchip/irq-ims-msi.h
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 1/12 x86/irq: Add DEV_MSI allocation type
From: Thomas Gleixner <[email protected]>
For the upcoming device MSI support a new allocation type is required.
--- arch/x86/include/asm/hw_irq.h | 1 + 1 file changed, 1 insertion(+)
arch/x86/include/asm/hw_irq.h +1 -0
@@ -41,6 +41,7 @@ enum irq_alloc_type {X86_IRQ_ALLOC_TYPE_DMAR ,X86_IRQ_ALLOC_TYPE_AMDVI ,X86_IRQ_ALLOC_TYPE_UV , + X86_IRQ_ALLOC_TYPE_DEV_MSI, }; struct ioapic_alloc_info {
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 2/12 x86/msi: Rename and rework pci_msi_prepare() to cover non-PCI MSI
In reply to Megha DeyFrom: Thomas Gleixner <[email protected]>
Rename it to x86_msi_prepare() and handle the allocation type setup depending on the device type.
Add a new arch_msi_prepare define which will be utilized by the upcoming device MSI support. Define it to NULL if not provided by an architecture in the generic MSI header.
One arch specific function for MSI support is truly enough.
--- arch/x86/include/asm/msi.h | 4 +++- arch/x86/kernel/apic/msi.c | 27 ++++++++++++++++++++------- drivers/pci/controller/pci-hyperv.c | 2 +- include/linux/msi.h | 4 ++++ 4 files changed, 28 insertions(+), 9 deletions(-)
arch/x86/include/asm/msi.h +3 -1
@@ -6,9 +6,11 @@typedef struct irq_alloc_info msi_alloc_info_t ; -int pci_msi_prepare (struct irq_domain *domain,struct device *dev,int nvec, +int x86_msi_prepare (struct irq_domain *domain,struct device *dev,int nvec,msi_alloc_info_t *arg); +#define arch_msi_prepare x86_msi_prepare +/* Structs and defines for the X86 specific MSI message format */ typedef struct x86_msi_data {
arch/x86/kernel/apic/msi.c +20 -7
@@ -153,26 +153,39 @@ static struct irq_chip pci_msi_controller = { .flags = IRQCHIP_SKIP_SET_WAKE, }; -int pci_msi_prepare (struct irq_domain *domain,struct device *dev,int nvec, -msi_alloc_info_t *arg) +static void pci_msi_prepare (struct device *dev,msi_alloc_info_t *arg) { -struct pci_dev *pdev =to_pci_dev (dev); -struct msi_desc *desc =first_pci_msi_entry (pdev); +struct msi_desc *desc =first_msi_entry (dev); -init_irq_alloc_info (arg,NULL );if (desc->msi_attrib.is_msix) { arg->type =X86_IRQ_ALLOC_TYPE_PCI_MSIX ; }else { arg->type =X86_IRQ_ALLOC_TYPE_PCI_MSI ; arg->flags |=X86_IRQ_ALLOC_CONTIGUOUS_VECTORS ; } +} + +static void dev_msi_prepare (struct device *dev,msi_alloc_info_t *arg) +{ + arg->type =X86_IRQ_ALLOC_TYPE_DEV_MSI ; +} + +int x86_msi_prepare (struct irq_domain *domain,struct device *dev,int nvec, +msi_alloc_info_t *arg) +{ +init_irq_alloc_info (arg,NULL ); + +if (dev_is_pci (dev)) +pci_msi_prepare (dev, arg); +else +dev_msi_prepare (dev, arg);return 0 ; } -EXPORT_SYMBOL_GPL (pci_msi_prepare); +EXPORT_SYMBOL_GPL (x86_msi_prepare);static struct msi_domain_ops pci_msi_domain_ops = { - .msi_prepare = pci_msi_prepare, + .msi_prepare = x86_msi_prepare, };static struct msi_domain_info pci_msi_domain_info = {
drivers/pci/controller/pci-hyperv.c +1 -1
@@ -1546,7 +1546,7 @@ static struct irq_chip hv_msi_irq_chip = { };static struct msi_domain_ops hv_msi_ops = { - .msi_prepare = pci_msi_prepare, + .msi_prepare = arch_msi_prepare, .msi_free = hv_msi_free, };
include/linux/msi.h +4 -0
@@ -467,4 +467,8 @@ static inline struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev) }#endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */ +#ifndef arch_msi_prepare +# define arch_msi_prepare NULL +#endif +#endif /* LINUX_MSI_H */
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 3/12 platform-msi: Provide default irq_chip:: Ack
In reply to Megha DeyFrom: Thomas Gleixner <[email protected]>
For the upcoming device MSI support it's required to have a default irq_chip::ack implementation (irq_chip_ack_parent) so the drivers do not need to care.
--- drivers/base/platform-msi.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/base/platform-msi.c +2 -0
@@ -101,6 +101,8 @@ static void platform_msi_update_chip_ops(struct msi_domain_info *info) chip->irq_mask = irq_chip_mask_parent;if (!chip->irq_unmask) chip->irq_unmask = irq_chip_unmask_parent; +if (!chip->irq_ack) + chip->irq_ack = irq_chip_ack_parent;if (!chip->irq_eoi) chip->irq_eoi = irq_chip_eoi_parent;if (!chip->irq_set_affinity)
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 4/12 genirq/proc: Take buslock on affinity write
In reply to Megha DeyFrom: Thomas Gleixner <[email protected]>
Until now interrupt chips which support setting affinity are not locking the associated bus lock for two reasons:
- All chips which support affinity setting do not use buslock because they just can operated directly on the hardware.
- All chips which use buslock do not support affinity setting because their interrupt chips are not capable. These chips are usually connected over a bus like I2C, SPI etc. and have an interrupt output which is conneted to CPU interrupt of some sort. So there is no way to set the affinity on the chip itself.
Upcoming hardware which is PCIE based sports a non standard MSI(X) variant which stores the MSI message in RAM which is associated to e.g. a device queue. The device manages this RAM and writes have to be issued via command queues or similar mechanisms which is obviously not possible from interrupt disabled, raw spinlock held context.
The buslock mechanism of irq chips can be utilized to support that. The affinity write to the chip writes to shadow state, marks it pending and the irq chip's irq_bus_sync_unlock() callback handles the command queue and wait for completion similar to the other chip operations on I2C or SPI busses.
Change the locking in irq_set_affinity() to bus_lock/unlock to help with that. There are a few other callers than the proc interface, but none of them is affected by this change as none of them affects an irq chip with bus lock support.
--- kernel/irq/manage.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/irq/manage.c +3 -3
@@ -443,16 +443,16 @@ int irq_update_affinity_desc(unsigned int irq,int __irq_set_affinity (unsigned int irq,const struct cpumask *mask,bool force) { -struct irq_desc *desc =irq_to_desc (irq); +struct irq_desc *desc;unsigned long flags;int ret; + desc =irq_get_desc_buslock (irq, &flags,IRQ_GET_DESC_CHECK_GLOBAL );if (!desc)return -EINVAL ; -raw_spin_lock_irqsave (&desc->lock, flags); ret =irq_set_affinity_locked (irq_desc_get_irq_data (desc), mask, force); -raw_spin_unlock_irqrestore (&desc->lock, flags); +irq_put_desc_busunlock (desc, flags);return ret; }
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 5/12 genirq/msi: Provide and use msi_domain_set_default_info_flags()
In reply to Megha DeyFrom: Thomas Gleixner <[email protected]>
MSI interrupts have some common flags which should be set not only for PCI/MSI interrupts.
Move the PCI/MSI flag setting into a common function so it can be reused.
--- drivers/pci/msi.c | 7 +------ include/linux/msi.h | 1 + kernel/irq/msi.c | 24 ++++++++++++++++++++++++ 3 files changed, 26 insertions(+), 6 deletions(-)
drivers/pci/msi.c +1 -6
@@ -1492,12 +1492,7 @@ struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode,if (info->flags &MSI_FLAG_USE_DEF_CHIP_OPS )pci_msi_domain_update_chip_ops (info); - info->flags |=MSI_FLAG_ACTIVATE_EARLY ; -if (IS_ENABLED (CONFIG_GENERIC_IRQ_RESERVATION_MODE )) - info->flags |=MSI_FLAG_MUST_REACTIVATE ; - -/* PCI-MSI is oneshot-safe */ - info->chip->flags |=IRQCHIP_ONESHOT_SAFE ; +msi_domain_set_default_info_flags (info); domain =msi_create_irq_domain (fwnode, info, parent);if (!domain)
include/linux/msi.h +1 -0
@@ -448,6 +448,7 @@ int platform_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,void platform_msi_domain_free (struct irq_domain *domain,unsigned int virq,unsigned int nvec);void *platform_msi_get_host_data (struct irq_domain *domain); +void msi_domain_set_default_info_flags (struct msi_domain_info *info);#endif /* CONFIG_GENERIC_MSI_IRQ_DOMAIN */ #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
kernel/irq/msi.c +24 -0
@@ -70,6 +70,30 @@ void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg)EXPORT_SYMBOL_GPL (get_cached_msi_msg);#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN +void msi_domain_set_default_info_flags (struct msi_domain_info *info) +{ +/* Required so that a device latches a valid MSI message on startup */ + info->flags |=MSI_FLAG_ACTIVATE_EARLY ; + +/* +* Interrupt reservation mode allows to stear the MSI message of an +* inactive device to a special (usually spurious interrupt) target. +* This allows to prevent interrupt vector exhaustion e.g. on x86. +* But (PCI)MSI interrupts are activated early - see above - so the +* interrupt request/startup sequence would not try to allocate a +* usable vector which means that the device interrupts would end +* up on the special vector and issue spurious interrupt messages. +* Setting the reactivation flag ensures that when the interrupt +* is requested the activation is invoked again so that a real +* vector can be allocated. +*/ +if (IS_ENABLED (CONFIG_GENERIC_IRQ_RESERVATION_MODE )) + info->flags |=MSI_FLAG_MUST_REACTIVATE ; + +/* MSI is oneshot-safe at least in theory */ + info->chip->flags |=IRQCHIP_ONESHOT_SAFE ; +} +static inline void irq_chip_write_msi_msg (struct irq_data *data,struct msi_msg *msg) {
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 6/12 platform-msi: Add device MSI infrastructure
In reply to Megha DeyFrom: Thomas Gleixner <[email protected]>
Add device specific MSI domain infrastructure for devices which have their own resource management and interrupt chip. These devices are not related to PCI and contrary to platform MSI they do not share a common resource and interrupt chip. They provide their own domain specific resource management and interrupt chip.
This utilizes the new alloc/free override in a non evil way which avoids having yet another set of specialized alloc/free functions. Just using msi_domain_alloc/free_irqs() is sufficient
While initially it was suggested and tried to piggyback device MSI on platform MSI, the better variant is to reimplement platform MSI on top of device MSI.
--- drivers/base/platform-msi.c | 131 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/irqdomain.h | 1 + include/linux/msi.h | 24 ++++++++ kernel/irq/Kconfig | 4 ++ 4 files changed, 160 insertions(+)
drivers/base/platform-msi.c +131 -0
@@ -419,3 +419,134 @@ int platform_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,return err; } + +#ifdef CONFIG_DEVICE_MSI +/* +* Device specific MSI domain infrastructure for devices which have their +* own resource management and interrupt chip. These devices are not +* related to PCI and contrary to platform MSI they do not share a common +* resource and interrupt chip. They provide their own domain specific +* resource management and interrupt chip. +*/ + +static void device_msi_free_msi_entries (struct device *dev) +{ +struct list_head *msi_list =dev_to_msi_list (dev); +struct msi_desc *entry, *tmp; + +list_for_each_entry_safe (entry, tmp, msi_list, list) { +list_del (&entry->list); +free_msi_entry (entry); + } +} + +/** +* device_msi_free_irqs - Free MSI interrupts assigned to a device +* @dev: Pointer to the device +* +* Frees the interrupt and the MSI descriptors. +*/ +static void device_msi_free_irqs (struct irq_domain *domain,struct device *dev) +{ +__msi_domain_free_irqs (domain, dev); +device_msi_free_msi_entries (dev); +} + +/** +* device_msi_alloc_irqs - Allocate MSI interrupts for a device +* @dev: Pointer to the device +* @nvec: Number of vectors +* +* Allocates the required number of MSI descriptors and the corresponding +* interrupt descriptors. +*/ +static int device_msi_alloc_irqs (struct irq_domain *domain,struct device *dev,int nvec) +{ +int i, ret = -ENOMEM ; + +for (i =0 ; i < nvec; i++) { +struct msi_desc *entry =alloc_msi_entry (dev,1 ,NULL ); + +if (!entry) + goto fail; +list_add_tail (&entry->list,dev_to_msi_list (dev)); + } + + ret =__msi_domain_alloc_irqs (domain, dev, nvec); +if (!ret) +return 0 ; +fail: +device_msi_free_msi_entries (dev); +return ret; +} + +static void device_msi_update_dom_ops (struct msi_domain_info *info) +{ +if (!info->ops->domain_alloc_irqs) + info->ops->domain_alloc_irqs = device_msi_alloc_irqs; +if (!info->ops->domain_free_irqs) + info->ops->domain_free_irqs = device_msi_free_irqs; +if (!info->ops->msi_prepare) + info->ops->msi_prepare = arch_msi_prepare; +} + +/** +* device_msi_create_msi_irq_domain - Create an irq domain for devices +* @fwnode: Firmware node of the interrupt controller +* @info: MSI domain info to configure the new domain +* @parent: Parent domain +*/ +struct irq_domain *device_msi_create_irq_domain (struct fwnode_handle *fn, +struct msi_domain_info *info, +struct irq_domain *parent) +{ +struct irq_domain *domain; + +if (info->flags &MSI_FLAG_USE_DEF_CHIP_OPS ) +platform_msi_update_chip_ops (info); + +if (info->flags &MSI_FLAG_USE_DEF_DOM_OPS ) +device_msi_update_dom_ops (info); + +msi_domain_set_default_info_flags (info); + + domain =msi_create_irq_domain (fn, info, parent); +if (domain) +irq_domain_update_bus_token (domain,DOMAIN_BUS_DEVICE_MSI ); +return domain; +} + +#ifdef CONFIG_PCI +#include <linux/pci.h> + +/** +* pci_subdevice_msi_create_irq_domain - Create an irq domain for subdevices +* @pdev: Pointer to PCI device for which the subdevice domain is created +* @info: MSI domain info to configure the new domain +*/ +struct irq_domain *pci_subdevice_msi_create_irq_domain (struct pci_dev *pdev, +struct msi_domain_info *info) +{ +struct irq_domain *domain, *pdev_msi; +struct fwnode_handle *fn; + +/* +* Retrieve the MSI domain of the underlying PCI device's MSI +* domain. The PCI device domain's parent domain is also the parent +* domain of the new subdevice domain. +*/ + pdev_msi =dev_get_msi_domain (&pdev->dev); +if (!pdev_msi) +return NULL ; + + fn =irq_domain_alloc_named_fwnode (dev_name (&pdev->dev)); +if (!fn) +return NULL ; + domain =device_msi_create_irq_domain (fn, info, pdev_msi->parent); +if (!domain) +irq_domain_free_fwnode (fn); +return domain; +} +EXPORT_SYMBOL_GPL (pci_subdevice_msi_create_irq_domain); +#endif /* CONFIG_PCI */ +#endif /* CONFIG_DEVICE_MSI */
include/linux/irqdomain.h +1 -0
@@ -85,6 +85,7 @@ enum irq_domain_bus_token {DOMAIN_BUS_TI_SCI_INTA_MSI ,DOMAIN_BUS_WAKEUP ,DOMAIN_BUS_VMD_MSI , + DOMAIN_BUS_DEVICE_MSI, };/**
include/linux/msi.h +24 -0
@@ -95,6 +95,18 @@ struct ti_sci_inta_msi_desc { };/** +* device_msi_desc - Device MSI specific MSI descriptor data +* @priv: Pointer to device specific private data +* @priv_iomem: Pointer to device specific private io memory +* @hwirq: The hardware irq number in the device domain +*/ +struct device_msi_desc { +void *priv; +void __iomem *priv_iomem; +u16 hwirq; +}; + +/** * struct msi_desc - Descriptor structure for MSI based interrupts * @list: List head for management * @irq: The base interrupt number
@@ -166,6 +178,7 @@ struct msi_desc {struct platform_msi_desc platform;struct fsl_mc_msi_desc fsl_mc;struct ti_sci_inta_msi_desc inta; +struct device_msi_desc device_msi; }; };
@@ -451,6 +464,17 @@ void *platform_msi_get_host_data(struct irq_domain *domain);void msi_domain_set_default_info_flags (struct msi_domain_info *info);#endif /* CONFIG_GENERIC_MSI_IRQ_DOMAIN */ +#ifdef CONFIG_DEVICE_MSI +struct irq_domain *device_msi_create_irq_domain (struct fwnode_handle *fn, +struct msi_domain_info *info, +struct irq_domain *parent); + +# ifdef CONFIG_PCI +struct irq_domain *pci_subdevice_msi_create_irq_domain (struct pci_dev *pdev, +struct msi_domain_info *info); +# endif +#endif /* CONFIG_DEVICE_MSI */ +#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN void pci_msi_domain_write_msg (struct irq_data *irq_data,struct msi_msg *msg); struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode,
kernel/irq/Kconfig +4 -0
@@ -89,6 +89,10 @@ config GENERIC_MSI_IRQ_DOMAIN select IRQ_DOMAIN_HIERARCHY select GENERIC_MSI_IRQ +config DEVICE_MSI + bool + select GENERIC_MSI_IRQ_DOMAIN + config IRQ_MSI_IOMMU bool
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 7/12 irqdomain/msi: Provide msi_alloc/free_store() callbacks
In reply to Megha DeyFrom: Thomas Gleixner <[email protected]>
For devices which don't have a standard storage for MSI messages like the upcoming IMS (Interrupt Message Store) it's required to allocate storage space before allocating interrupts and after freeing them.
This could be achieved with the existing callbacks, but that would be awkward because they operate on msi_alloc_info_t which is not uniform across architectures. Also these callbacks are invoked per interrupt but the allocation might have bulk requirements depending on the device.
As such devices can operate on different architectures it is simpler to have separate callbacks which operate on struct device. The resulting storage information has to be stored in struct msi_desc so the underlying irq chip implementation can retrieve it for the relevant operations.
--- include/linux/msi.h | 8 ++++++++ kernel/irq/msi.c | 11 +++++++++++ 2 files changed, 19 insertions(+)
include/linux/msi.h +8 -0
@@ -317,6 +317,10 @@ struct msi_domain_info;* function. * @domain_free_irqs: Optional function to override the default free * function. +* @msi_alloc_store: Optional callback to allocate storage in a device +* specific non-standard MSI store +* @msi_alloc_free: Optional callback to free storage in a device +* specific non-standard MSI store * * @get_hwirq, @msi_init and @msi_free are callbacks used by * msi_create_irq_domain() and related interfaces
@@ -366,6 +370,10 @@ struct msi_domain_ops { struct device *dev, int nvec);void (*domain_free_irqs)(struct irq_domain *domain,struct device *dev); +int (*msi_alloc_store)(struct irq_domain *domain, +struct device *dev,int nvec); +void (*msi_free_store)(struct irq_domain *domain, +struct device *dev); };/**
kernel/irq/msi.c +11 -0
@@ -434,6 +434,12 @@ int __msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,if (ret)return ret; +if (ops->msi_alloc_store) { + ret = ops->msi_alloc_store (domain, dev, nvec); +if (ret) +return ret; + } +for_each_msi_entry (desc, dev) { ops->set_desc (&arg, desc);
@@ -533,6 +539,8 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,void __msi_domain_free_irqs (struct irq_domain *domain,struct device *dev) { +struct msi_domain_info *info = domain->host_data; +struct msi_domain_ops *ops = info->ops;struct msi_desc *desc;for_each_msi_entry (desc, dev) {
@@ -546,6 +554,9 @@ void __msi_domain_free_irqs(struct irq_domain *domain, struct device *dev) desc->irq =0 ; } } + +if (ops->msi_free_store) + ops->msi_free_store (domain, dev); }/**
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 8/12 genirq: Set auxiliary data for an interrupt
In reply to Megha DeyIntroduce a new function pointer in the irq_chip structure(irq_set_auxdata) which is responsible for updating data which is stored in a shared register or data storage. For example, the idxd driver uses the auxiliary data API to enable/set and disable PASID field that is in the IMS entry (introduced in a later patch) and that data are not typically present in MSI entry.
--- include/linux/interrupt.h | 2 ++ include/linux/irq.h | 4 ++++ kernel/irq/manage.c | 32 ++++++++++++++++++++++++++++++++ 3 files changed, 38 insertions(+)
include/linux/interrupt.h +2 -0
@@ -496,6 +496,8 @@ extern int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,extern int irq_set_irqchip_state (unsigned int irq,enum irqchip_irq_state which,bool state); +int irq_set_auxdata (unsigned int irq,unsigned int which,u64 val); +#ifdef CONFIG_IRQ_FORCED_THREADING # ifdef CONFIG_PREEMPT_RT # define force_irqthreads (true)
include/linux/irq.h +4 -0
@@ -491,6 +491,8 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)* irq_request_resources * @irq_compose_msi_msg: optional to compose message content for MSI * @irq_write_msi_msg: optional to write message content for MSI +* @irq_set_auxdata: Optional function to update auxiliary data e.g. in +* shared registers * @irq_get_irqchip_state: return the internal state of an interrupt * @irq_set_irqchip_state: set the internal state of a interrupt * @irq_set_vcpu_affinity: optional to target a vCPU in a virtual machine
@@ -538,6 +540,8 @@ struct irq_chip {void (*irq_compose_msi_msg)(struct irq_data *data,struct msi_msg *msg);void (*irq_write_msi_msg)(struct irq_data *data,struct msi_msg *msg); +int (*irq_set_auxdata)(struct irq_data *data,unsigned int which,u64 auxval); +int (*irq_get_irqchip_state)(struct irq_data *data,enum irqchip_irq_state which,bool *state);int (*irq_set_irqchip_state)(struct irq_data *data,enum irqchip_irq_state which,bool state);
kernel/irq/manage.c +32 -0
@@ -2860,3 +2860,35 @@ bool irq_check_status_bit(unsigned int irq, unsigned int bitmask)return res; }EXPORT_SYMBOL_GPL (irq_check_status_bit); + +/** +* irq_set_auxdata - Set auxiliary data +* @irq: Interrupt to update +* @which: Selector which data to update +* @auxval: Auxiliary data value +* +* Function to update auxiliary data for an interrupt, e.g. to update data +* which is stored in a shared register or data storage (e.g. IMS). +*/ +int irq_set_auxdata (unsigned int irq,unsigned int which,u64 val) +{ +struct irq_desc *desc; +struct irq_data *data; +unsigned long flags; +int res = -ENODEV ; + + desc =irq_get_desc_buslock (irq, &flags,0 ); +if (!desc) +return -EINVAL ; + +for (data = &desc->irq_data; data; data =irqd_get_parent_data (data)) { +if (data->chip->irq_set_auxdata) { + res = data->chip->irq_set_auxdata (data, which, val); +break ; + } + } + +irq_put_desc_busunlock (desc, flags); +return res; +} +EXPORT_SYMBOL_GPL (irq_set_auxdata);
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 9/12 iommu/vt-d: Add DEV-MSI support
In reply to Megha DeyAdd required support in the interrupt remapping driver for devices which generate dev-msi interrupts and use the intel remapping domain as the parent domain. Set the source-id of all dev-msi interrupt requests to the parent PCI device associated with it.
--- drivers/iommu/intel/irq_remapping.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/iommu/intel/irq_remapping.c +5 -1
@@ -1278,6 +1278,9 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,case X86_IRQ_ALLOC_TYPE_PCI_MSIX :set_msi_sid (irte,msi_desc_to_pci_dev (info->desc));break ; +case X86_IRQ_ALLOC_TYPE_DEV_MSI : +set_msi_sid (irte,to_pci_dev (info->desc->dev->parent)); +break ;default :BUG_ON (1 );break ;
@@ -1321,7 +1324,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,if (!info || !iommu)return -EINVAL ;if (nr_irqs >1 && info->type !=X86_IRQ_ALLOC_TYPE_PCI_MSI && - info->type !=X86_IRQ_ALLOC_TYPE_PCI_MSIX ) + info->type !=X86_IRQ_ALLOC_TYPE_PCI_MSIX && + info->type !=X86_IRQ_ALLOC_TYPE_DEV_MSI )return -EINVAL ;/*
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 10/12 iommu: Add capability IOMMU_CAP_VIOMMU_HINT
In reply to Megha DeyFrom: Lu Baolu <[email protected]>
Some IOMMU specification defines some kind of hint mechanism, through which BIOS can imply that OS runs in a virtualized environment. For example, the caching mode defined in VT-d spec and NpCache capability defined in the AMD IOMMU specification. This hint could also be used outside of the IOMMU subsystem, where it could be used with other known means (CPUID, smbios) to sense whether Linux is running in a virtualized environment. Add a capability bit so that it could be used there.
--- drivers/iommu/amd/iommu.c | 2 ++ drivers/iommu/intel/iommu.c | 20 ++++++++++++++++++++ drivers/iommu/virtio-iommu.c | 9 +++++++++ include/linux/iommu.h | 2 ++ 4 files changed, 33 insertions(+)
drivers/iommu/amd/iommu.c +2 -0
@@ -2646,6 +2646,8 @@ static bool amd_iommu_capable(enum iommu_cap cap)return (irq_remapping_enabled ==1 );case IOMMU_CAP_NOEXEC :return false; +case IOMMU_CAP_VIOMMU_HINT : +return amd_iommu_np_cache;default :break ; }
drivers/iommu/intel/iommu.c +20 -0
@@ -5094,12 +5094,32 @@ static inline bool nested_mode_support(void)return ret; } +static inline bool caching_mode_supported (void ) +{ +struct dmar_drhd_unit *drhd; +struct intel_iommu *iommu; +bool ret = false; + +rcu_read_lock (); +for_each_active_iommu (iommu, drhd) { +if (cap_caching_mode (iommu->cap)) { + ret = true; +break ; + } + } +rcu_read_unlock (); + +return ret; +} +static bool intel_iommu_capable (enum iommu_cap cap) {if (cap ==IOMMU_CAP_CACHE_COHERENCY )return domain_update_iommu_snooping (NULL ) ==1 ;if (cap ==IOMMU_CAP_INTR_REMAP )return irq_remapping_enabled ==1 ; +if (cap ==IOMMU_CAP_VIOMMU_HINT ) +return caching_mode_supported ();return false; }
drivers/iommu/virtio-iommu.c +9 -0
@@ -931,7 +931,16 @@ static int viommu_of_xlate(struct device *dev, struct of_phandle_args *args)return iommu_fwspec_add_ids (dev, args->args,1 ); } +static bool viommu_capable (enum iommu_cap cap) +{ +if (cap ==IOMMU_CAP_VIOMMU_HINT ) +return true; + +return false; +} +static struct iommu_ops viommu_ops = { + .capable = viommu_capable, .domain_alloc = viommu_domain_alloc, .domain_free = viommu_domain_free, .attach_dev = viommu_attach_dev,
include/linux/iommu.h +2 -0
@@ -94,6 +94,8 @@ enum iommu_cap {transactions */ IOMMU_CAP_INTR_REMAP ,/* IOMMU supports interrupt isolation */ IOMMU_CAP_NOEXEC ,/* IOMMU_NOEXEC flag */ + IOMMU_CAP_VIOMMU_HINT, /* IOMMU can detect a hit for running in + VM */ };/*
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 11/12 platform-msi: Add platform check for subdevice irq domain
In reply to Megha DeyFrom: Lu Baolu <[email protected]>
The pci_subdevice_msi_create_irq_domain() should fail if the underlying platform is not able to support IMS (Interrupt Message Storage). Otherwise, the isolation of interrupt is not guaranteed.
For x86, IMS is only supported on bare metal for now. We could enable it in the virtualization environments in the future if interrupt HYPERCALL domain is supported or the hardware has the capability of interrupt isolation for subdevices.
--- arch/x86/pci/common.c | 74 +++++++++++++++++++++++++++++++++++++++++++++ drivers/base/platform-msi.c | 8 +++++ include/linux/msi.h | 1 + 3 files changed, 83 insertions(+)
arch/x86/pci/common.c +74 -0
@@ -12,6 +12,8 @@#include <linux/init.h> #include <linux/dmi.h> #include <linux/slab.h> +#include <linux/iommu.h> +#include <linux/msi.h> #include <asm/acpi.h> #include <asm/segment.h>
@@ -724,3 +726,75 @@ struct pci_dev *pci_real_dma_dev(struct pci_dev *dev)return dev; }#endif + +#ifdef CONFIG_DEVICE_MSI +/* +* We want to figure out which context we are running in. But the hardware +* does not introduce a reliable way (instruction, CPUID leaf, MSR, whatever) +* which can be manipulated by the VMM to let the OS figure out where it runs. +* So we go with the below probably on_bare_metal() function as a replacement +* for definitely on_bare_metal() to go forward only for the very simple reason +* that this is the only option we have. +*/ +static const char *const vmm_vendor_name[] = { +"QEMU" ,"Bochs" ,"KVM" ,"Xen" ,"VMware" ,"VMW" ,"VMware Inc." , +"innotek GmbH" ,"Oracle Corporation" ,"Parallels" ,"BHYVE" +}; + +static void read_type0_virtual_machine (const struct dmi_header *dm,void *p) +{ +u8 *data = (u8 *)dm +0x13 ; + +/* BIOS Information (Type 0) */ +if (dm->type !=0 || dm->length <0x14 ) +return ; + +/* Bit 4 of BIOS Characteristics Extension Byte 2*/ +if (*data &BIT (4 )) + *((bool *)p) = true; +} + +static bool smbios_virtual_machine (void ) +{ +bool bit_present = false; + +dmi_walk (read_type0_virtual_machine, &bit_present); + +return bit_present; +} + +static bool on_bare_metal (struct device *dev) +{ +int i; + +if (boot_cpu_has (X86_FEATURE_HYPERVISOR )) +return false; + +if (smbios_virtual_machine ()) +return false; + +if (iommu_capable (dev->bus,IOMMU_CAP_VIOMMU_HINT )) +return false; + +for (i =0 ; i <ARRAY_SIZE (vmm_vendor_name); i++) +if (dmi_match (DMI_SYS_VENDOR , vmm_vendor_name[i])) +return false; + +pr_info ("System running on bare metal, report to bugzilla.kernel.org if not the case." ); + +return true; +} + +bool arch_support_pci_device_ims (struct pci_dev *pdev) +{ +/* +* When we are running in a VMM context, the device IMS could only be +* enabled when the underlying hardware supports interrupt isolation +* of the subdevice, or any mechanism (trap, hypercall) is added so +* that changes in the interrupt message store could be managed by the +* VMM. For now, we only support the device IMS when we are running on +* the bare metal. +*/ +return on_bare_metal (&pdev->dev); +} +#endif
drivers/base/platform-msi.c +8 -0
@@ -519,6 +519,11 @@ struct irq_domain *device_msi_create_irq_domain(struct fwnode_handle *fn,#ifdef CONFIG_PCI #include <linux/pci.h> +bool __weak arch_support_pci_device_ims (struct pci_dev *pdev) +{ +return false; +} +/** * pci_subdevice_msi_create_irq_domain - Create an irq domain for subdevices * @pdev: Pointer to PCI device for which the subdevice domain is created
@@ -530,6 +535,9 @@ struct irq_domain *pci_subdevice_msi_create_irq_domain(struct pci_dev *pdev,struct irq_domain *domain, *pdev_msi;struct fwnode_handle *fn; +if (!arch_support_pci_device_ims (pdev)) +return NULL ; +/* * Retrieve the MSI domain of the underlying PCI device's MSI * domain. The PCI device domain's parent domain is also the parent
include/linux/msi.h +1 -0
@@ -478,6 +478,7 @@ struct irq_domain *device_msi_create_irq_domain(struct fwnode_handle *fn, struct irq_domain *parent);# ifdef CONFIG_PCI +bool arch_support_pci_device_ims (struct pci_dev *pdev);struct irq_domain *pci_subdevice_msi_create_irq_domain (struct pci_dev *pdev,struct msi_domain_info *info);# endif
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH 11/12] platform-msi: Add platform check for subdevice irq domain
arch/x86/pci/common.c struct pci_dev *pci_real_dma_dev(struct pci_dev *dev) · line 789
Quoted 2 lines · Megha Dey
arch/x86/pci/common.c +2
-0+bool arch_support_pci_device_ims (struct pci_dev *pdev) +{
Consistent language please, we are not using IMS elsewhere, this feature is called device_msi in Linux.
Jason
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Lu Baolu
maintainerRe: [PATCH 11/12] platform-msi: Add platform check for subdevice irq domain
Hi Jason,
Quoted 7 lines · Jason Gunthorpe
arch/x86/pci/common.c struct pci_dev *pci_real_dma_dev(struct pci_dev *dev) · line 789
Quoted 2 lines · Megha Dey
arch/x86/pci/common.c +2
-0+bool arch_support_pci_device_ims (struct pci_dev *pdev) +{Consistent language please, we are not using IMS elsewhere, this feature is called
device_msiin Linux.
Thanks for pointing this out. I will correct it.
Quoted 2 lines
Jason
Best regards,
baolu
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH 11/12] platform-msi: Add platform check for subdevice irq domain
In reply to Megha DeyQuoted 40 lines · Megha Dey
From: Lu Baolu <[email protected]>
The
pci_subdevice_msi_create_irq_domain()should fail if the underlying platform is not able to support IMS (Interrupt Message Storage). Otherwise, the isolation of interrupt is not guaranteed.For x86, IMS is only supported on bare metal for now. We could enable it in the virtualization environments in the future if interrupt HYPERCALL domain is supported or the hardware has the capability of interrupt isolation for subdevices.
Cc David Woodhouse <[email protected]>Cc Leon Romanovsky <[email protected]>Cc Kevin Tian <[email protected]>Suggested-by Thomas Gleixner <[email protected]>Signed-off-by Lu Baolu <[email protected]>Signed-off-by Megha Dey <[email protected]>--- arch/x86/pci/common.c | 74 +++++++++++++++++++++++++++++++++++++++++++++ drivers/base/platform-msi.c | 8 +++++ include/linux/msi.h | 1 + 3 files changed, 83 insertions(+)arch/x86/pci/common.c +2
-0@@ -12,6 +12,8 @@#include <linux/init.h> #include <linux/dmi.h> #include <linux/slab.h> +#include <linux/iommu.h> +#include <linux/msi.h> #include <asm/acpi.h> #include <asm/segment.h>
arch/x86/pci/common.c struct pci_dev *pci_real_dma_dev(struct pci_dev *dev) · line 730
Quoted 5 lines
arch/x86/pci/common.c +2
-0@@ -724,3 +726,75 @@ struct pci_dev *pci_real_dma_dev(struct pci_dev *dev) return dev; }#endif + +#ifdef CONFIG_DEVICE_MSI
Sorry for my naive question, but I see it in all your patches in this series and wonder why did you wrap everything with ifdefs?.
All *.c code is wrapped with those ifdefs, which is hard to navigate and unlikely to give any code/size optimization benefit if kernel is compiled without CONFIG_DEVICE_MSI. The more common approach is to put those ifdef in the public header files and leave to the compiler to drop not called functions.
Thanks
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Lu Baolu
maintainerRe: [PATCH 11/12] platform-msi: Add platform check for subdevice irq domain
Hi Leon,
Quoted 38 lines · Leon Romanovsky
Quoted 37 lines · Megha Dey
From: Lu Baolu <[email protected]>
The
pci_subdevice_msi_create_irq_domain()should fail if the underlying platform is not able to support IMS (Interrupt Message Storage). Otherwise, the isolation of interrupt is not guaranteed.For x86, IMS is only supported on bare metal for now. We could enable it in the virtualization environments in the future if interrupt HYPERCALL domain is supported or the hardware has the capability of interrupt isolation for subdevices.
Cc David Woodhouse <[email protected]>Cc Leon Romanovsky <[email protected]>Cc Kevin Tian <[email protected]>Suggested-by Thomas Gleixner <[email protected]>Signed-off-by Lu Baolu <[email protected]>Signed-off-by Megha Dey <[email protected]>--- arch/x86/pci/common.c | 74 +++++++++++++++++++++++++++++++++++++++++++++ drivers/base/platform-msi.c | 8 +++++ include/linux/msi.h | 1 + 3 files changed, 83 insertions(+)arch/x86/pci/common.c +2
-0@@ -12,6 +12,8 @@#include <linux/init.h> #include <linux/dmi.h> #include <linux/slab.h> +#include <linux/iommu.h> +#include <linux/msi.h>
Quoted 11 lines
arch/x86/pci/common.c struct pci_dev *pci_real_dma_dev(struct pci_dev *dev) · line 730
Quoted 8 lines
arch/x86/pci/common.c +2
-0#include <asm/acpi.h> #include <asm/segment.h> @@ -724,3 +726,75 @@ struct pci_dev *pci_real_dma_dev(struct pci_dev *dev) return dev; }#endif + +#ifdef CONFIG_DEVICE_MSI Sorry for my naive question, but I see it in all your patches in this series and wonder why did you wrap everything with ifdefs?.
The added code is only called when DEVICE_MSI is configured.
Quoted 6 lines
All *.c code is wrapped with those ifdefs, which is hard to navigate and unlikely to give any code/size optimization benefit if kernel is compiled without
CONFIG_DEVICE_MSI. The more common approach is to put those ifdef in the public header files and leave to the compiler to drop not called functions.
Yes. This looks better.
Quoted 3 lines
Thanks
Best regards,
baolu
PATCH 12/12 irqchip: Add IMS (Interrupt Message Store) driver
In reply to Megha DeyFrom: Thomas Gleixner <[email protected]>
Generic IMS(Interrupt Message Store) irq chips and irq domain implementations for IMS based devices which store the interrupt messages in an array in device memory.
Allocation and freeing of interrupts happens via the generic msi_domain_alloc/free_irqs() interface. No special purpose IMS magic required as long as the interrupt domain is stored in the underlying device struct. The irq_set_auxdata() is used to program the pasid into the IMS entry.
[Megha : Fixed compile time errors
Added necessary dependencies to IMS_MSI_ARRAY config Fixed polarity of IMS_VECTOR_CTRL
Added reads after writes to flush writes to device Added set_desc ops to IMS msi domain ops Tested the IMS infrastructure with the IDXD driver]
--- drivers/irqchip/Kconfig | 14 +++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-ims-msi.c | 211 ++++++++++++++++++++++++++++++++++++ include/linux/irqchip/irq-ims-msi.h | 68 ++++++++++++ 4 files changed, 294 insertions(+) create mode 100644 drivers/irqchip/irq-ims-msi.c create mode 100644 include/linux/irqchip/irq-ims-msi.h
drivers/irqchip/Kconfig +14 -0
@@ -590,4 +590,18 @@ config MST_IRQ help Support MStar Interrupt Controller. +config IMS_MSI + depends on PCI + select DEVICE_MSI + bool + +config IMS_MSI_ARRAY + bool "IMS Interrupt Message Store MSI controller for device memory storage arrays" + depends on PCI + select IMS_MSI + select GENERIC_MSI_IRQ_DOMAIN + help + Support for IMS Interrupt Message Store MSI controller + with IMS slot storage in a slot array in device memory + endmenu
drivers/irqchip/Makefile +1 -0
@@ -113,3 +113,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-loongson-pch-pic.o obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o obj-$(CONFIG_MST_IRQ) += irq-mst-intc.o obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o +obj-$(CONFIG_IMS_MSI) += irq-ims-msi.o
drivers/irqchip/irq-ims-msi.c new file +211 -0
211 lines not on this page · raw message
include/linux/irqchip/irq-ims-msi.h new file +68 -0
68 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu