Add FU740 chip and HiFive Unmatched board support
Subsystems (7)
cover Add FU740 chip and HiFive Unmatched board support
This patch set is to add SiFive fu740 chip and HiFive Unmatched board support. Patches are split into several parts:
- [PATCH 1/7] dts for fu740
- [PATCH 2/7] support for fu740 cpu
- [PATCH 3/7, 4/7] support for fu740 clk and ram
- [PATCH 5/7] add pcie driver
- [PATCH 6/7] add unmatched board
- [PATCH 7/7] add fu740 support to macb driver
Description
- For fu740 cpu support, reuse most of fu540 cpu.
- For prci driver, add one abstract layer to separate fu540 and fu740. Move orignal fu540 code to separate files.
- For pcie driver, it depends on gpio, prci, clk and reset drivers to do init&reset works.
- Align with Linux DT file.
Tests and patch checks
- Able to boot both unmatched and unleashed boards.
- PCIe tests
. M.2 NVMe SSD
. e1000 compatibale ethernet adapter (ping&tftpboot) . pci-to-usb adapter(usb mass storage)
- checkpatch is performed. To keep code derived from other boards the same, ignore some warnings/errors in [PATCH 6/7].
Green Wan (7):
riscv: dts: add fu740 support
riscv: cpu: fu740: Add support for cpu fu740
drivers: clk: add fu740 support
drivers: ram: add fu740 support
drivers: pci: add pcie support for fu740
board: sifive: add HiFive Unmatched board support
drivers: net: macb: add fu740 support
arch/riscv/Kconfig | 8 + arch/riscv/cpu/fu740/Kconfig | 37 + arch/riscv/cpu/fu740/Makefile | 12 + arch/riscv/cpu/fu740/cache.c | 55 + arch/riscv/cpu/fu740/cpu.c | 22 + arch/riscv/cpu/fu740/dram.c | 38 + arch/riscv/cpu/fu740/spl.c | 23 + arch/riscv/dts/Makefile | 1 + arch/riscv/dts/fu740-c000-u-boot.dtsi | 105 ++ arch/riscv/dts/fu740-c000.dtsi | 329 +++++ arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi | 1489 ++++++++++++++++++++ arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi | 40 + arch/riscv/dts/hifive-unmatched-a00.dts | 263 ++++ arch/riscv/include/asm/arch-fu740/cache.h | 14 + arch/riscv/include/asm/arch-fu740/clk.h | 14 + arch/riscv/include/asm/arch-fu740/gpio.h | 38 + arch/riscv/include/asm/arch-fu740/reset.h | 13 + arch/riscv/include/asm/arch-fu740/spl.h | 14 + arch/riscv/lib/sifive_clint.c | 1 - board/sifive/fu540/Kconfig | 1 - board/sifive/fu540/fu540.c | 2 +- board/sifive/hifive_unmatched_fu740/Kconfig | 50 + board/sifive/hifive_unmatched_fu740/MAINTAINERS | 8 + board/sifive/hifive_unmatched_fu740/Makefile | 9 + .../hifive-unmatched-fu740.c | 24 + board/sifive/hifive_unmatched_fu740/spl.c | 85 ++ common/spl/Kconfig | 5 +- configs/sifive_hifive_unmatched_fu740_defconfig | 57 + doc/board/sifive/fu540.rst | 19 +- drivers/clk/sifive/Kconfig | 8 +- drivers/clk/sifive/Makefile | 4 +- drivers/clk/sifive/fu540-prci.c | 769 +--------- drivers/clk/sifive/fu540-prci.h | 22 + drivers/clk/sifive/fu740-prci.c | 158 +++ drivers/clk/sifive/fu740-prci.h | 22 + drivers/clk/sifive/sifive-prci.c | 733 ++++++++++ drivers/clk/sifive/sifive-prci.h | 323 +++++ drivers/net/macb.c | 8 +- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pcie_sifive.c | 797 +++++++++++ drivers/pci/pcie_sifive.h | 374 +++++ drivers/ram/sifive/Kconfig | 8 +- drivers/ram/sifive/Makefile | 2 +- drivers/ram/sifive/sifive_ddr.c | 410 ++++++ drivers/reset/Kconfig | 2 +- include/configs/sifive-fu540.h | 5 - include/configs/sifive-hifive-unmatched-fu740.h | 88 ++ include/dt-bindings/clock/sifive-fu740-prci.h | 25 + include/dt-bindings/reset/sifive-fu740-prci.h | 19 + 50 files changed, 5782 insertions(+), 781 deletions(-) create mode 100644 arch/riscv/cpu/fu740/Kconfig create mode 100644 arch/riscv/cpu/fu740/Makefile create mode 100644 arch/riscv/cpu/fu740/cache.c create mode 100644 arch/riscv/cpu/fu740/cpu.c create mode 100644 arch/riscv/cpu/fu740/dram.c create mode 100644 arch/riscv/cpu/fu740/spl.c create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi create mode 100644 arch/riscv/dts/fu740-c000.dtsi create mode 100644 arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00.dts create mode 100644 arch/riscv/include/asm/arch-fu740/cache.h create mode 100644 arch/riscv/include/asm/arch-fu740/clk.h create mode 100644 arch/riscv/include/asm/arch-fu740/gpio.h create mode 100644 arch/riscv/include/asm/arch-fu740/reset.h create mode 100644 arch/riscv/include/asm/arch-fu740/spl.h create mode 100644 board/sifive/hifive_unmatched_fu740/Kconfig create mode 100644 board/sifive/hifive_unmatched_fu740/MAINTAINERS create mode 100644 board/sifive/hifive_unmatched_fu740/Makefile create mode 100644 board/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.c create mode 100644 board/sifive/hifive_unmatched_fu740/spl.c create mode 100644 configs/sifive_hifive_unmatched_fu740_defconfig create mode 100644 drivers/clk/sifive/fu540-prci.h create mode 100644 drivers/clk/sifive/fu740-prci.c create mode 100644 drivers/clk/sifive/fu740-prci.h create mode 100644 drivers/clk/sifive/sifive-prci.c create mode 100644 drivers/clk/sifive/sifive-prci.h create mode 100644 drivers/pci/pcie_sifive.c create mode 100644 drivers/pci/pcie_sifive.h create mode 100644 drivers/ram/sifive/sifive_ddr.c create mode 100644 include/configs/sifive-hifive-unmatched-fu740.h create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h
Signature · 1 line
2.7.4
PATCH 1/7 riscv: dts: add fu740 support
Add dts support for fu740
--- arch/riscv/dts/Makefile | 1 + arch/riscv/dts/fu740-c000-u-boot.dtsi | 105 ++++++++ arch/riscv/dts/fu740-c000.dtsi | 329 ++++++++++++++++++++++++++ include/dt-bindings/clock/sifive-fu740-prci.h | 25 ++ include/dt-bindings/reset/sifive-fu740-prci.h | 19 ++ 5 files changed, 479 insertions(+) create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi create mode 100644 arch/riscv/dts/fu740-c000.dtsi create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h
arch/riscv/dts/Makefile +1 -0
@@ -2,6 +2,7 @@ dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb +dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
arch/riscv/dts/fu740-c000-u-boot.dtsi new file +105 -0
105 lines not on this page · raw message
arch/riscv/dts/fu740-c000.dtsi new file +329 -0
329 lines not on this page · raw message
include/dt-bindings/clock/sifive-fu740-prci.h new file +25 -0
@@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020-2021 SiFive, Inc. +* Wesley Terpstra +* Paul Walmsley +* Zong Li +* Pragnesh Patel +*/ + +#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H +#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H + +/* Clock indexes for use by Device Tree data and the PRCI driver */ + +#define PRCI_CLK_COREPLL 0 +#define PRCI_CLK_DDRPLL 1 +#define PRCI_CLK_GEMGXLPLL 2 +#define PRCI_CLK_DVFSCOREPLL 3 +#define PRCI_CLK_HFPCLKPLL 4 +#define PRCI_CLK_CLTXPLL 5 +#define PRCI_CLK_TLCLK 6 +#define PRCI_CLK_PCLK 7 +#define PRCI_CLK_PCIEAUX 8 + +#endif
include/dt-bindings/reset/sifive-fu740-prci.h new file +19 -0
@@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020-2021 Sifive, Inc. +* Author: Pragnesh Patel <[email protected]> +*/ + +#ifndef __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H +#define __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H + +/* Reset indexes for use by device tree data and the PRCI driver */ +#define PRCI_RST_DDR_CTRL_N 0 +#define PRCI_RST_DDR_AXI_N 1 +#define PRCI_RST_DDR_AHB_N 2 +#define PRCI_RST_DDR_PHY_N 3 +#define PRCI_RST_PCIE_POWER_UP_N 4 +#define PRCI_RST_GEMGXL_N 5 +#define PRCI_RST_CLTX_N 6 + +#endif
Signature · 1 line
2.7.4
PATCH 1/7 riscv: dts: add fu740 support
Quoted 2 lines · Green Wan
Add dts support for fu740
The commit summary should mention both fu740 and HiFive Unmatched
Quoted 478 lines
Signed-off-by Green Wan <[email protected]>--- arch/riscv/dts/Makefile | 1 + arch/riscv/dts/fu740-c000-u-boot.dtsi | 105 ++++++++ arch/riscv/dts/fu740-c000.dtsi | 329 ++++++++++++++++++++++++++ include/dt-bindings/clock/sifive-fu740-prci.h | 25 ++ include/dt-bindings/reset/sifive-fu740-prci.h | 19 ++ 5 files changed, 479 insertions(+) create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi create mode 100644 arch/riscv/dts/fu740-c000.dtsi create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.harch/riscv/dts/Makefile +1
-0@@ -2,6 +2,7 @@ dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb +dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtbarch/riscv/dts/fu740-c000-u-boot.dtsi new file +105
-0@@ -0,0 +1,105 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * (C) Copyright 2020-2021 SiFive, Inc + */ + +#include <dt-bindings/reset/sifive-fu740-prci.h> + +/ { + cpus { + assigned-clocks = <&prci PRCI_CLK_COREPLL>; + assigned-clock-rates = <1001000000>; + u-boot,dm-spl; + cpu0: cpu at 0 { + clocks = <&prci PRCI_CLK_COREPLL>; + u-boot,dm-spl; + status = "okay"; + cpu0_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + cpu1: cpu at 1 { + clocks = <&prci PRCI_CLK_COREPLL>; + u-boot,dm-spl; + cpu1_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + cpu2: cpu at 2 { + clocks = <&prci PRCI_CLK_COREPLL>; + u-boot,dm-spl; + cpu2_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + cpu3: cpu at 3 { + clocks = <&prci PRCI_CLK_COREPLL>; + u-boot,dm-spl; + cpu3_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + cpu4: cpu at 4 { + clocks = <&prci PRCI_CLK_COREPLL>; + u-boot,dm-spl; + cpu4_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + }; + + soc { + u-boot,dm-spl; + clint: clint at 2000000 { + compatible = "riscv,clint0"; + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 + &cpu1_intc 3 &cpu1_intc 7 + &cpu2_intc 3 &cpu2_intc 7 + &cpu3_intc 3 &cpu3_intc 7 + &cpu4_intc 3 &cpu4_intc 7>; + reg = <0x0 0x2000000 0x0 0x10000>; + u-boot,dm-spl; + }; + prci: clock-controller at 10000000 { + #reset-cells = <1>; + resets = <&prci PRCI_RST_DDR_CTRL_N>, + <&prci PRCI_RST_DDR_AXI_N>, + <&prci PRCI_RST_DDR_AHB_N>, + <&prci PRCI_RST_DDR_PHY_N>, + <&prci PRCI_RST_GEMGXL_N>, + <&prci PRCI_RST_CLTX_N>; + reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb", + "ddr_phy", "gemgxl_reset", "cltx_reset"; + }; + dmc: dmc at 100b0000 { + compatible = "sifive,fu740-c000-ddr"; + reg = <0x0 0x100b0000 0x0 0x0800 + 0x0 0x100b2000 0x0 0x2000 + 0x0 0x100b8000 0x0 0x1000>; + clocks = <&prci PRCI_CLK_DDRPLL>; + clock-frequency = <933333324>; + u-boot,dm-spl; + }; + }; +}; + +&prci { + u-boot,dm-spl; +}; + +&uart0 { + u-boot,dm-spl; +}; + +&spi0 { + u-boot,dm-spl; +}; + +ð0 { + assigned-clocks = <&prci PRCI_CLK_GEMGXLPLL>; + assigned-clock-rates = <125125000>; +}; + +&ccache { + status = "okay"; +};arch/riscv/dts/fu740-c000.dtsi new file +329
-0@@ -0,0 +1,329 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 SiFive, Inc */ + +/dts-v1/; + +#include <dt-bindings/clock/sifive-fu740-prci.h> +#include <dt-bindings/reset/sifive-fu740-prci.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + compatible = "sifive,fu740-c000", "sifive,fu740"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + ethernet0 = ð0; + }; + + chosen { + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu0: cpu at 0 { + compatible = "sifive,bullet0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + next-level-cache = <&ccache>; + reg = <0x0>; + riscv,isa = "rv64imac"; + status = "disabled"; + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu1: cpu at 1 { + compatible = "sifive,bullet0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + reg = <0x1>; + riscv,isa = "rv64imafdc"; + tlb-split; + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu2: cpu at 2 { + compatible = "sifive,bullet0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + reg = <0x2>; + riscv,isa = "rv64imafdc"; + tlb-split; + cpu2_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu3: cpu at 3 { + compatible = "sifive,bullet0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + reg = <0x3>; + riscv,isa = "rv64imafdc"; + tlb-split; + cpu3_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu4: cpu at 4 { + compatible = "sifive,bullet0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + reg = <0x4>; + riscv,isa = "rv64imafdc"; + tlb-split; + cpu4_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "sifive,fu740-c000", "sifive,fu740", "simple-bus"; + ranges; + plic0: interrupt-controller at c000000 { + #interrupt-cells = <1>; + compatible = "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + riscv,ndev = <69>; + interrupt-controller; + interrupts-extended = < + &cpu0_intc 0xffffffff + &cpu1_intc 0xffffffff &cpu1_intc 9 + &cpu2_intc 0xffffffff &cpu2_intc 9 + &cpu3_intc 0xffffffff &cpu3_intc 9 + &cpu4_intc 0xffffffff &cpu4_intc 9>; + }; + prci: clock-controller at 10000000 { + compatible = "sifive,fu740-c000-prci"; + reg = <0x0 0x10000000 0x0 0x1000>; + clocks = <&hfclk>, <&rtcclk>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + uart0: serial at 10010000 { + compatible = "sifive,fu740-c000-uart", "sifive,uart0"; + reg = <0x0 0x10010000 0x0 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <39>; + clocks = <&prci PRCI_CLK_PCLK>; + status = "disabled"; + }; + uart1: serial at 10011000 { + compatible = "sifive,fu740-c000-uart", "sifive,uart0"; + reg = <0x0 0x10011000 0x0 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <40>; + clocks = <&prci PRCI_CLK_PCLK>; + status = "disabled"; + }; + i2c0: i2c at 10030000 { + compatible = "sifive,fu740-c000-i2c", "sifive,i2c0"; + reg = <0x0 0x10030000 0x0 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <52>; + clocks = <&prci PRCI_CLK_PCLK>; + reg-shift = <2>; + reg-io-width = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c1: i2c at 10031000 { + compatible = "sifive,fu740-c000-i2c", "sifive,i2c0"; + reg = <0x0 0x10031000 0x0 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <53>; + clocks = <&prci PRCI_CLK_PCLK>; + reg-shift = <2>; + reg-io-width = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + qspi0: spi at 10040000 { + compatible = "sifive,fu740-c000-spi", "sifive,spi0"; + reg = <0x0 0x10040000 0x0 0x1000 + 0x0 0x20000000 0x0 0x10000000>; + interrupt-parent = <&plic0>; + interrupts = <41>; + clocks = <&prci PRCI_CLK_PCLK>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + qspi1: spi at 10041000 { + compatible = "sifive,fu740-c000-spi", "sifive,spi0"; + reg = <0x0 0x10041000 0x0 0x1000 + 0x0 0x30000000 0x0 0x10000000>; + interrupt-parent = <&plic0>; + interrupts = <42>; + clocks = <&prci PRCI_CLK_PCLK>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi0: spi at 10050000 { + compatible = "sifive,fu740-c000-spi", "sifive,spi0"; + reg = <0x0 0x10050000 0x0 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <43>; + clocks = <&prci PRCI_CLK_PCLK>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + eth0: ethernet at 10090000 { + compatible = "sifive,fu740-c000-gem"; + interrupt-parent = <&plic0>; + interrupts = <55>; + reg = <0x0 0x10090000 0x0 0x2000 + 0x0 0x100a0000 0x0 0x1000>; + local-mac-address = [00 00 00 00 00 00]; + clock-names = "pclk", "hclk"; + clocks = <&prci PRCI_CLK_GEMGXLPLL>, + <&prci PRCI_CLK_GEMGXLPLL>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pwm0: pwm at 10020000 { + compatible = "sifive,fu740-c000-pwm", "sifive,pwm0"; + reg = <0x0 0x10020000 0x0 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <44 45 46 47>; + clocks = <&prci PRCI_CLK_PCLK>; + #pwm-cells = <3>; + status = "disabled"; + }; + pwm1: pwm at 10021000 { + compatible = "sifive,fu740-c000-pwm", "sifive,pwm0"; + reg = <0x0 0x10021000 0x0 0x1000>; + interrupt-parent = <&plic0>; + interrupts = <48 49 50 51>; + clocks = <&prci PRCI_CLK_PCLK>; + #pwm-cells = <3>; + status = "disabled"; + }; + ccache: cache-controller at 2010000 { + compatible = "sifive,fu740-c000-ccache", "cache"; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <2048>; + cache-size = <2097152>; + cache-unified; + interrupt-parent = <&plic0>; + interrupts = <19 21 22 20>; + reg = <0x0 0x2010000 0x0 0x1000>; + }; + gpio: gpio at 10060000 { + compatible = "sifive,fu740-c000-gpio", "sifive,gpio0"; + interrupt-parent = <&plic0>; + interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, + <30>, <31>, <32>, <33>, <34>, <35>, <36>, + <37>, <38>; + reg = <0x0 0x10060000 0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&prci PRCI_CLK_PCLK>; + status = "disabled"; + }; + pcie at e00000000 { + #address-cells = <3>; + #interrupt-cells = <1>; + #num-lanes = <8>; + #size-cells = <2>; + compatible = "sifive,fu740-pcie"; + reg = <0xe 0x00000000 0x1 0x0 + 0xd 0xf0000000 0x0 0x10000000 + 0x0 0x100d0000 0x0 0x1000>; + reg-names = "dbi", "config", "mgmt"; + device_type = "pci"; + dma-coherent; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000 + 0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000 + 0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000 + 0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; + num-lanes = <0x8>; + interrupts = <56 57 58 59 60 61 62 63 64>; + interrupt-names = "msi", "inta", "intb", "intc", "intd"; + interrupt-parent = <&plic0>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>, + <0x0 0x0 0x0 0x2 &plic0 58>, + <0x0 0x0 0x0 0x3 &plic0 59>, + <0x0 0x0 0x0 0x4 &plic0 60>; + pwren-gpios = <&gpio 5 0>; + perstn-gpios = <&gpio 8 0>; + clocks = <&prci PRCI_CLK_PCIEAUX>; + clock-names = "pcieaux"; + resets = <&prci PRCI_RST_PCIE_POWER_UP_N>; + reset-names = "rst_n"; + + status = "okay"; + }; + }; +};include/dt-bindings/clock/sifive-fu740-prci.h new file +0
-0
include/dt-bindings/clock/sifive-fu740-prci.h line 1
Quoted 1 line
include/dt-bindings/clock/sifive-fu740-prci.h new file +1
-0@@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */
Can you please make this (GPL-2.0 OR MIT)?
Quoted 30 lines
include/dt-bindings/clock/sifive-fu740-prci.h new file +24
-0+/* +* Copyright (C) 2020-2021 SiFive, Inc. +* Wesley Terpstra +* Paul Walmsley +* Zong Li +* Pragnesh Patel +*/ + +#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H +#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H + +/* Clock indexes for use by Device Tree data and the PRCI driver */ + +#define PRCI_CLK_COREPLL 0 +#define PRCI_CLK_DDRPLL 1 +#define PRCI_CLK_GEMGXLPLL 2 +#define PRCI_CLK_DVFSCOREPLL 3 +#define PRCI_CLK_HFPCLKPLL 4 +#define PRCI_CLK_CLTXPLL 5 +#define PRCI_CLK_TLCLK 6 +#define PRCI_CLK_PCLK 7 +#define PRCI_CLK_PCIEAUX 8 + +#endif include/dt-bindings/reset/sifive-fu740-prci.h new file +0
-0
include/dt-bindings/reset/sifive-fu740-prci.h line 1
Quoted 1 line
include/dt-bindings/reset/sifive-fu740-prci.h new file +1
-0@@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */
Ditto
Quoted 8 lines
include/dt-bindings/reset/sifive-fu740-prci.h new file +8
-0+/* +* Copyright (C) 2020-2021 Sifive, Inc. +* Author: Pragnesh Patel <[email protected]> +*/ + +#ifndef __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H +#define __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H +
include/dt-bindings/reset/sifive-fu740-prci.h line 19
Quoted 10 lines
include/dt-bindings/reset/sifive-fu740-prci.h new file +10
-0+/* Reset indexes for use by device tree data and the PRCI driver */ +#define PRCI_RST_DDR_CTRL_N 0 +#define PRCI_RST_DDR_AXI_N 1 +#define PRCI_RST_DDR_AHB_N 2 +#define PRCI_RST_DDR_PHY_N 3 +#define PRCI_RST_PCIE_POWER_UP_N 4 +#define PRCI_RST_GEMGXL_N 5 +#define PRCI_RST_CLTX_N 6 + +#endif
Otherwise LGTM
PATCH 2/7 riscv: cpu: fu740: Add support for cpu fu740
In reply to Green WanAdd SiFive fu740 cpu to support RISC-V arch
--- arch/riscv/Kconfig | 8 +++++ arch/riscv/cpu/fu740/Kconfig | 37 +++++++++++++++++++++ arch/riscv/cpu/fu740/Makefile | 12 +++++++ arch/riscv/cpu/fu740/cache.c | 55 +++++++++++++++++++++++++++++++ arch/riscv/cpu/fu740/cpu.c | 22 +++++++++++++ arch/riscv/cpu/fu740/dram.c | 38 +++++++++++++++++++++ arch/riscv/cpu/fu740/spl.c | 23 +++++++++++++ arch/riscv/include/asm/arch-fu740/cache.h | 14 ++++++++ arch/riscv/include/asm/arch-fu740/clk.h | 14 ++++++++ arch/riscv/include/asm/arch-fu740/gpio.h | 38 +++++++++++++++++++++ arch/riscv/include/asm/arch-fu740/reset.h | 13 ++++++++ arch/riscv/include/asm/arch-fu740/spl.h | 14 ++++++++ arch/riscv/lib/sifive_clint.c | 1 - common/spl/Kconfig | 5 +-- 14 files changed, 291 insertions(+), 3 deletions(-) create mode 100644 arch/riscv/cpu/fu740/Kconfig create mode 100644 arch/riscv/cpu/fu740/Makefile create mode 100644 arch/riscv/cpu/fu740/cache.c create mode 100644 arch/riscv/cpu/fu740/cpu.c create mode 100644 arch/riscv/cpu/fu740/dram.c create mode 100644 arch/riscv/cpu/fu740/spl.c create mode 100644 arch/riscv/include/asm/arch-fu740/cache.h create mode 100644 arch/riscv/include/asm/arch-fu740/clk.h create mode 100644 arch/riscv/include/asm/arch-fu740/gpio.h create mode 100644 arch/riscv/include/asm/arch-fu740/reset.h create mode 100644 arch/riscv/include/asm/arch-fu740/spl.h
arch/riscv/Kconfig +8 -0
@@ -20,6 +20,12 @@ config TARGET_QEMU_VIRT config TARGET_SIFIVE_FU540 bool "Support SiFive FU540 Board" +config TARGET_SIFIVE_UNMATCHED + bool "Support SiFive hifive-unmatched Board(FU740)" + help + Choose this option to select SiFive HiFive Unmatched board. + Include fu740 features such as prci, clk, reset, pcie, etc. + config TARGET_SIPEED_MAIX bool "Support Sipeed Maix Board"
@@ -56,11 +62,13 @@ source "board/AndesTech/ax25-ae350/Kconfig" source "board/emulation/qemu-riscv/Kconfig" source "board/microchip/mpfs_icicle/Kconfig" source "board/sifive/fu540/Kconfig" +source "board/sifive/hifive_unmatched_fu740/Kconfig" source "board/sipeed/maix/Kconfig" # platform-specific options below source "arch/riscv/cpu/ax25/Kconfig" source "arch/riscv/cpu/fu540/Kconfig" +source "arch/riscv/cpu/fu740/Kconfig" source "arch/riscv/cpu/generic/Kconfig" # architecture-specific options below
arch/riscv/cpu/fu740/Kconfig new file +37 -0
@@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2020 SiFive, Inc +# Pragnesh Patel <[email protected]> + +config SIFIVE_FU740 + bool + select ARCH_EARLY_INIT_R + select RAM + select SPL_RAM if SPL + imply CPU + imply CPU_RISCV + imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE) + imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE) + imply CMD_CPU + imply SPL_CPU_SUPPORT + imply SPL_OPENSBI + imply SPL_LOAD_FIT + imply SMP + imply CLK_SIFIVE + imply CLK_SIFIVE_PRCI + imply SIFIVE_SERIAL + imply MACB + imply MII + imply SPI + imply SPI_SIFIVE + imply MMC + imply MMC_SPI + imply MMC_BROKEN_CD + imply CMD_MMC + imply DM_GPIO + imply SIFIVE_GPIO + imply CMD_GPIO + imply MISC + imply SIFIVE_OTP + imply DM_PWM + imply PWM_SIFIVE
arch/riscv/cpu/fu740/Makefile new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2020 SiFive, Inc +# Pragnesh Patel <[email protected]> + +ifeq ($(CONFIG_SPL_BUILD),y) +obj-y += spl.o +else +obj-y += dram.o +obj-y += cpu.o +obj-y += cache.o +endif
arch/riscv/cpu/fu740/cache.c new file +55 -0
55 lines not on this page · raw message
arch/riscv/cpu/fu740/cpu.c new file +22 -0
@@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2018, Bin Meng <[email protected]> +*/ + +#include <irq_func.h> +#include <asm/cache.h> + +/* +* cleanup_before_linux() is called just before we call linux +* it prepares the processor for linux +* +* we disable interrupt and caches. +*/ +int cleanup_before_linux (void ) +{ +disable_interrupts (); + +cache_flush (); + +return 0 ; +}
arch/riscv/cpu/fu740/dram.c new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2018, Bin Meng <[email protected]> +*/ + +#include <common.h> +#include <fdtdec.h> +#include <init.h> +#include <linux/sizes.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int dram_init (void ) +{ +return fdtdec_setup_mem_size_base (); +} + +int dram_init_banksize (void ) +{ +return fdtdec_setup_memory_banksize (); +} + +ulong board_get_usable_ram_top (ulong total_size) +{ +#ifdef CONFIG_64BIT +/* +* Ensure that we run from first 4GB so that all +* addresses used by U-Boot are 32bit addresses. +* +* This in-turn ensures that 32bit DMA capable +* devices work fine because DMA mapping APIs will +* provide 32bit DMA addresses only. +*/ +if (gd->ram_top >SZ_4G ) +return SZ_4G ; +#endif +return gd->ram_top; +}
arch/riscv/cpu/fu740/spl.c new file +23 -0
@@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2020-201 SiFive, Inc +* Pragnesh Patel <[email protected]> +*/ + +#include <dm.h> +#include <log.h> + +int spl_soc_init (void ) +{ +int ret; +struct udevice *dev; + +/* DDR init */ + ret =uclass_get_device (UCLASS_RAM ,0 , &dev); +if (ret) { +debug ("DRAM init failed: %d\n" , ret); +return ret; + } + +return 0 ; +}
arch/riscv/include/asm/arch-fu740/cache.h new file +14 -0
@@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2020-2021 SiFive, Inc. +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#ifndef _CACHE_SIFIVE_H +#define _CACHE_SIFIVE_H + +int cache_enable_ways (void ); + +#endif /* _CACHE_SIFIVE_H */
arch/riscv/include/asm/arch-fu740/clk.h new file +14 -0
@@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020-2021 SiFive Inc +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#ifndef __CLK_SIFIVE_H +#define __CLK_SIFIVE_H + +/* Note: This is a placeholder header for driver compilation. */ + +#endif
arch/riscv/include/asm/arch-fu740/gpio.h new file +38 -0
@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2020-2021 SiFive, Inc. +*/ + +#ifndef _GPIO_SIFIVE_H +#define _GPIO_SIFIVE_H + +#define GPIO_INPUT_VAL 0x00 +#define GPIO_INPUT_EN 0x04 +#define GPIO_OUTPUT_EN 0x08 +#define GPIO_OUTPUT_VAL 0x0C +#define GPIO_RISE_IE 0x18 +#define GPIO_RISE_IP 0x1C +#define GPIO_FALL_IE 0x20 +#define GPIO_FALL_IP 0x24 +#define GPIO_HIGH_IE 0x28 +#define GPIO_HIGH_IP 0x2C +#define GPIO_LOW_IE 0x30 +#define GPIO_LOW_IP 0x34 +#define GPIO_OUTPUT_XOR 0x40 + +#define NR_GPIOS 16 + +enum gpio_state { +LOW , +HIGH +}; + +/* Details about a GPIO bank */ +struct sifive_gpio_plat { +void *base;/* address of registers in physical memory */ +}; + +#define SIFIVE_GENERIC_GPIO_NR (port, index) \ + (((port) * NR_GPIOS) + ((index) & (NR_GPIOS - 1))) + +#endif /* _GPIO_SIFIVE_H */
arch/riscv/include/asm/arch-fu740/reset.h new file +13 -0
@@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020-2021 SiFive, Inc. +* +* Author: Sagar Kadam <[email protected]> +*/ + +#ifndef __RESET_SIFIVE_H +#define __RESET_SIFIVE_H + +int sifive_reset_bind (struct udevice *dev,ulong count); + +#endif
arch/riscv/include/asm/arch-fu740/spl.h new file +14 -0
@@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2020-2021 SiFive, Inc. +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#ifndef _SPL_SIFIVE_H +#define _SPL_SIFIVE_H + +int spl_soc_init (void ); + +#endif /* _SPL_SIFIVE_H */
arch/riscv/lib/sifive_clint.c +0 -1
@@ -10,7 +10,6 @@#include <common.h> #include <dm.h> -#include <asm/global_data.h> #include <asm/io.h> #include <asm/smp.h> #include <linux/err.h>
common/spl/Kconfig +3 -2
@@ -317,7 +317,8 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR ARCH_MX6 || ARCH_MX7 || \ ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \ ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \ - OMAP44XX || OMAP54XX || AM33XX || AM43XX || TARGET_SIFIVE_FU540 + OMAP44XX || OMAP54XX || AM33XX || AM43XX || TARGET_SIFIVE_FU540 || \ + TARGET_SIFIVE_UNMATCHED help Use sector number for specifying U-Boot location on MMC/SD in raw mode.
@@ -334,7 +335,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \ OMAP54XX || AM33XX || AM43XX || ARCH_K3 default 0x4000 if ARCH_ROCKCHIP - default 0x822 if TARGET_SIFIVE_FU540 + default 0x822 if TARGET_SIFIVE_FU540 || TARGET_SIFIVE_UNMATCHED help Address on the MMC to load U-Boot from, when the MMC is being used in raw mode. Units: MMC sectors (1 sector = 512 bytes).
Signature · 1 line
2.7.4
PATCH 2/7 riscv: cpu: fu740: Add support for cpu fu740
Quoted 23 lines · Green Wan
Add SiFive fu740 cpu to support RISC-V arch
Signed-off-by Green Wan <[email protected]>--- arch/riscv/Kconfig | 8 +++++ arch/riscv/cpu/fu740/Kconfig | 37 +++++++++++++++++++++ arch/riscv/cpu/fu740/Makefile | 12 +++++++ arch/riscv/cpu/fu740/cache.c | 55 +++++++++++++++++++++++++++++++ arch/riscv/cpu/fu740/cpu.c | 22 +++++++++++++ arch/riscv/cpu/fu740/dram.c | 38 +++++++++++++++++++++ arch/riscv/cpu/fu740/spl.c | 23 +++++++++++++ arch/riscv/include/asm/arch-fu740/cache.h | 14 ++++++++ arch/riscv/include/asm/arch-fu740/clk.h | 14 ++++++++ arch/riscv/include/asm/arch-fu740/gpio.h | 38 +++++++++++++++++++++ arch/riscv/include/asm/arch-fu740/reset.h | 13 ++++++++ arch/riscv/include/asm/arch-fu740/spl.h | 14 ++++++++ arch/riscv/lib/sifive_clint.c | 1 - common/spl/Kconfig | 5 +-- 14 files changed, 291 insertions(+), 3 deletions(-) create mode 100644 arch/riscv/cpu/fu740/Kconfig create mode 100644 arch/riscv/cpu/fu740/Makefile create mode 100644 arch/riscv/cpu/fu740/cache.c
Quoted 9 lines
create mode 100644 arch/riscv/cpu/fu740/cpu.c create mode 100644 arch/riscv/cpu/fu740/dram.c create mode 100644 arch/riscv/cpu/fu740/spl.c create mode 100644 arch/riscv/include/asm/arch-fu740/cache.h create mode 100644 arch/riscv/include/asm/arch-fu740/clk.h create mode 100644 arch/riscv/include/asm/arch-fu740/gpio.h create mode 100644 arch/riscv/include/asm/arch-fu740/reset.h create mode 100644 arch/riscv/include/asm/arch-fu740/spl.h
PATCH 3/7 drivers: clk: add fu740 support
In reply to Green WanAdd fu740 support. One abstract layer is added for supporting multiple chips such as fu540 and fu740.
--- drivers/clk/sifive/Kconfig | 8 +- drivers/clk/sifive/Makefile | 4 +- drivers/clk/sifive/fu540-prci.c | 769 ++------------------------------------- drivers/clk/sifive/fu540-prci.h | 22 ++ drivers/clk/sifive/fu740-prci.c | 158 ++++++++ drivers/clk/sifive/fu740-prci.h | 22 ++ drivers/clk/sifive/sifive-prci.c | 733 +++++++++++++++++++++++++++++++++++++ drivers/clk/sifive/sifive-prci.h | 323 ++++++++++++++++ 8 files changed, 1286 insertions(+), 753 deletions(-) create mode 100644 drivers/clk/sifive/fu540-prci.h create mode 100644 drivers/clk/sifive/fu740-prci.c create mode 100644 drivers/clk/sifive/fu740-prci.h create mode 100644 drivers/clk/sifive/sifive-prci.c create mode 100644 drivers/clk/sifive/sifive-prci.h
drivers/clk/sifive/Kconfig +4 -4
@@ -6,11 +6,11 @@ config CLK_SIFIVE help SoC drivers for SiFive Linux-capable SoCs. -config CLK_SIFIVE_FU540_PRCI - bool "PRCI driver for SiFive FU540 SoCs" +config CLK_SIFIVE_PRCI + bool "PRCI driver for SiFive SoCs" depends on CLK_SIFIVE select CLK_ANALOGBITS_WRPLL_CLN28HPC help Supports the Power Reset Clock interface (PRCI) IP block found in - FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, - enable this driver. + FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/ + FU740 SoCs, enable this driver.
drivers/clk/sifive/Makefile +3 -1
@@ -1,3 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+ -obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o +obj-y += sifive-prci.o + +obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o fu740-prci.o
drivers/clk/sifive/fu540-prci.c +21 -748
807 lines not on this page · raw message
drivers/clk/sifive/fu540-prci.h new file +22 -0
@@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 SiFive, Inc. +* Zong Li +* Pragnesh Patel +*/ + +#ifndef __SIFIVE_CLK_FU540_PRCI_H +#define __SIFIVE_CLK_FU540_PRCI_H + +#include "sifive-prci.h" + +#define NUM_CLOCK_FU540 4 + +extern struct __prci_clock __prci_init_clocks_fu540[NUM_CLOCK_FU540 ]; + +static const struct prci_clk_desc prci_clk_fu540 = { + .clks = __prci_init_clocks_fu540, + .num_clks =ARRAY_SIZE (__prci_init_clocks_fu540), +}; + +#endif /* __SIFIVE_CLK_FU540_PRCI_H */
drivers/clk/sifive/fu740-prci.c new file +158 -0
158 lines not on this page · raw message
drivers/clk/sifive/fu740-prci.h new file +22 -0
@@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 SiFive, Inc. +* Zong Li +* Pragnesh Patel +*/ + +#ifndef __SIFIVE_CLK_FU740_PRCI_H +#define __SIFIVE_CLK_FU740_PRCI_H + +#include "sifive-prci.h" + +#define NUM_CLOCK_FU740 9 + +extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740 ]; + +static const struct prci_clk_desc prci_clk_fu740 = { + .clks = __prci_init_clocks_fu740, + .num_clks =ARRAY_SIZE (__prci_init_clocks_fu740), +}; + +#endif /* __SIFIVE_CLK_FU740_PRCI_H */
drivers/clk/sifive/sifive-prci.c new file +733 -0
733 lines not on this page · raw message
drivers/clk/sifive/sifive-prci.h new file +323 -0
323 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 4/7 drivers: ram: add fu740 support
In reply to Green WanAdd fu740 support for ram.
--- drivers/ram/sifive/Kconfig | 8 +- drivers/ram/sifive/Makefile | 2 +- drivers/ram/sifive/sifive_ddr.c | 410 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 415 insertions(+), 5 deletions(-) create mode 100644 drivers/ram/sifive/sifive_ddr.c
drivers/ram/sifive/Kconfig +4 -4
@@ -5,9 +5,9 @@ config RAM_SIFIVE help This enables support for ram drivers of SiFive SoCs. -config SIFIVE_FU540_DDR - bool "SiFive FU540 DDR driver" +config SIFIVE_DDR + bool "SiFive DDR driver" depends on RAM_SIFIVE - default y if TARGET_SIFIVE_FU540 + default y if TARGET_SIFIVE_FU540 || TARGET_SIFIVE_UNMATCHED help - This enables DDR support for the platforms based on SiFive FU540 SoC. + This enables DDR support for the platforms based on SiFive SoCs.
drivers/ram/sifive/Makefile +1 -1
@@ -3,4 +3,4 @@ # Copyright (c) 2020 SiFive, Inc # -obj-$(CONFIG_SIFIVE_FU540_DDR) += fu540_ddr.o +obj-$(CONFIG_SIFIVE_DDR) += sifive_ddr.o
drivers/ram/sifive/sifive_ddr.c new file +410 -0
410 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 4/7 drivers: ram: add fu740 support
drivers/ram/sifive/sifive_ddr.c
Quoted 41 lines · Green Wan
Add fu740 support for ram.
Signed-off-by Green Wan <[email protected]>--- drivers/ram/sifive/Kconfig | 8 +- drivers/ram/sifive/Makefile | 2 +- drivers/ram/sifive/sifive_ddr.c | 410 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 415 insertions(+), 5 deletions(-) create mode 100644 drivers/ram/sifive/sifive_ddr.cdrivers/ram/sifive/Kconfig +4
-4@@ -5,9 +5,9 @@ config RAM_SIFIVE help This enables support for ram drivers of SiFive SoCs. -config SIFIVE_FU540_DDR - bool "SiFive FU540 DDR driver" +config SIFIVE_DDR + bool "SiFive DDR driver" depends on RAM_SIFIVE - default y if TARGET_SIFIVE_FU540 + default y if TARGET_SIFIVE_FU540 || TARGET_SIFIVE_UNMATCHED help - This enables DDR support for the platforms based on SiFive FU540 SoC. + This enables DDR support for the platforms based on SiFive SoCs.drivers/ram/sifive/Makefile +1
-1@@ -3,4 +3,4 @@ # Copyright (c) 2020 SiFive, Inc # -obj-$(CONFIG_SIFIVE_FU540_DDR) += fu540_ddr.o +obj-$(CONFIG_SIFIVE_DDR) += sifive_ddr.odrivers/ram/sifive/sifive_ddr.c new file +0
-0
Can you do a "git mv" to the old fu540_ddr.c?
drivers/ram/sifive/sifive_ddr.c
Quoted 3 lines
index 0000000..d89a02b
drivers/ram/sifive/sifive_ddr.c new file +0
-0
[snip]
Regards,
Bin
PATCH 5/7 drivers: pci: add pcie support for fu740
In reply to Green WanAdd pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.
Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)
--- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pcie_sifive.c | 797 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++++++ 4 files changed, 1181 insertions(+) create mode 100644 drivers/pci/pcie_sifive.c create mode 100644 drivers/pci/pcie_sifive.h
drivers/pci/Kconfig +9 -0
@@ -97,6 +97,15 @@ config PCIE_DW_MVEBU Armada-8K SoCs. The PCIe controller on Armada-8K is based on DesignWare hardware. +config PCIE_SIFIVE_FU740 + bool "Enable SiFive FU740 PCIe" + depends on CLK_SIFIVE_PRCI + depends on RESET_SIFIVE + depends on SIFIVE_GPIO + help + Say Y here if you want to enable PCIe controller support on + FU740. + config PCIE_FSL bool "FSL PowerPC PCIe support" depends on DM_PCI
drivers/pci/Makefile +1 -0
@@ -51,3 +51,4 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o +obj-$(CONFIG_PCIE_SIFIVE_FU740) += pcie_sifive.o
drivers/pci/pcie_sifive.c new file +797 -0
797 lines not on this page · raw message
drivers/pci/pcie_sifive.h new file +374 -0
374 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 5/7 drivers: pci: add pcie support for fu740
Quoted 55 lines · Green Wan
Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.
Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)Signed-off-by Green Wan <[email protected]>--- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pcie_sifive.c | 797 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++++++ 4 files changed, 1181 insertions(+) create mode 100644 drivers/pci/pcie_sifive.c create mode 100644 drivers/pci/pcie_sifive.hdrivers/pci/Kconfig +9
-0@@ -97,6 +97,15 @@ config PCIE_DW_MVEBU Armada-8K SoCs. The PCIe controller on Armada-8K is based on DesignWare hardware. +config PCIE_SIFIVE_FU740 + bool "Enable SiFive FU740 PCIe" + depends on CLK_SIFIVE_PRCI + depends on RESET_SIFIVE + depends on SIFIVE_GPIO + help + Say Y here if you want to enable PCIe controller support on + FU740. + config PCIE_FSL bool "FSL PowerPC PCIe support" depends on DM_PCIdrivers/pci/Makefile +1
-0@@ -51,3 +51,4 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o +obj-$(CONFIG_PCIE_SIFIVE_FU740) += pcie_sifive.odrivers/pci/pcie_sifive.c new file +0
-0
drivers/pci/pcie_sifive.c line 3
Quoted 3 lines
drivers/pci/pcie_sifive.c new file +3
-0@@ -0,0 +1,797 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* SiFive FU740 DesignWare PCIe Controller
Should we call this driver a DesgnWare PCIe controller (e.g.:pcie_designware.c), instead of pcie_sifive.c?
Quoted 9 lines
drivers/pci/pcie_sifive.c new file +9
-0+* +* Copyright (C) 2020-2021 SiFive, Inc. +* +* Based in early part on the i.MX6 PCIe host controller shim which is: +* +* Copyright (C) 2013 Kosagi +* http://www.kosagi.com +* +* Based on driver from author: Alan Mikhak <[email protected]>
drivers/pci/pcie_sifive.c line 22
Quoted 10 lines
drivers/pci/pcie_sifive.c new file +10
-0+*/ +#include "pcie_sifive.h" +#include <common.h> +#include <dm.h> + +/* Host Bridge Identification */ +#define DEVICE_NAME "SiFive FU740 PCIe Host Controller" +#define VENDOR_ID 0x51fe +#define DEVICE_ID 0x51fe +
[snip]
Regards,
Bin
PATCH 5/7 drivers: pci: add pcie support for fu740
Bin Meng <[email protected]>? 2021?3?11? ?????10:14???
Quoted 55 lines · Green Wan
Quoted 10 lines
Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.
Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)Quoted 5 lines
Signed-off-by Green Wan <[email protected]>--- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pcie_sifive.c | 797++++++++++++++++++++++++++++++++++++++++++++++
Quoted 38 lines
drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++++++ 4 files changed, 1181 insertions(+) create mode 100644 drivers/pci/pcie_sifive.c create mode 100644 drivers/pci/pcie_sifive.hdrivers/pci/Kconfig +9
-0@@ -97,6 +97,15 @@ config PCIE_DW_MVEBU Armada-8K SoCs. The PCIe controller on Armada-8K is based on DesignWare hardware. +config PCIE_SIFIVE_FU740 + bool "Enable SiFive FU740 PCIe" + depends on CLK_SIFIVE_PRCI + depends on RESET_SIFIVE + depends on SIFIVE_GPIO + help + Say Y here if you want to enable PCIe controller support on + FU740. + config PCIE_FSL bool "FSL PowerPC PCIe support" depends on DM_PCIdrivers/pci/Makefile +1
-0@@ -51,3 +51,4 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o +obj-$(CONFIG_PCIE_SIFIVE_FU740) += pcie_sifive.odrivers/pci/pcie_sifive.c new file +0
-1--- /dev/null
Quoted 9 lines
drivers/pci/pcie_sifive.c line 3
Quoted 5 lines
+++
b/drivers/pci/pcie_sifive.cdrivers/pci/pcie_sifive.c new file +3
-0@@ -0,0 +1,797 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* SiFive FU740 DesignWare PCIe Controller Should we call this driver a DesgnWare PCIe controller (e.g.:
pcie_designware.c), instead ofpcie_sifive.c?
The driver currently depends on fu740 drivers such as prci, clk, gpio and reset. probably rename it to pcie_dw_sifive.c like other designware based driver. What do we think of it?
Quoted 26 lines
Quoted 10 lines
drivers/pci/pcie_sifive.c new file +9
-0+* +* Copyright (C) 2020-2021 SiFive, Inc. +* +* Based in early part on the i.MX6 PCIe host controller shim which is: +* +* Copyright (C) 2013 Kosagi +* http://www.kosagi.com +* +* Based on driver from author: Alan Mikhak <[email protected] drivers/pci/pcie_sifive.c line 22
Quoted 10 lines
drivers/pci/pcie_sifive.c new file +10
-0+*/ +#include "pcie_sifive.h" +#include <common.h> +#include <dm.h> + +/* Host Bridge Identification */ +#define DEVICE_NAME "SiFive FU740 PCIe Host Controller" +#define VENDOR_ID 0x51fe +#define DEVICE_ID 0x51fe +[snip]
Regards,
Bin
PATCH 5/7 drivers: pci: add pcie support for fu740
Quoted 69 lines · Green Wan
Bin Meng <[email protected]>? 2021?3?11? ?????10:14???
Quoted 55 lines · Green Wan
Quoted 53 lines
Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.
Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)Signed-off-by Green Wan <[email protected]>--- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pcie_sifive.c | 797 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++++++ 4 files changed, 1181 insertions(+) create mode 100644 drivers/pci/pcie_sifive.c create mode 100644 drivers/pci/pcie_sifive.hdrivers/pci/Kconfig +9
-0@@ -97,6 +97,15 @@ config PCIE_DW_MVEBU Armada-8K SoCs. The PCIe controller on Armada-8K is based on DesignWare hardware. +config PCIE_SIFIVE_FU740 + bool "Enable SiFive FU740 PCIe" + depends on CLK_SIFIVE_PRCI + depends on RESET_SIFIVE + depends on SIFIVE_GPIO + help + Say Y here if you want to enable PCIe controller support on + FU740. + config PCIE_FSL bool "FSL PowerPC PCIe support" depends on DM_PCIdrivers/pci/Makefile +1
-0@@ -51,3 +51,4 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o +obj-$(CONFIG_PCIE_SIFIVE_FU740) += pcie_sifive.odrivers/pci/pcie_sifive.c new file +0
-1--- /dev/nullQuoted 8 lines
drivers/pci/pcie_sifive.c line 3
Quoted 5 lines
+++
b/drivers/pci/pcie_sifive.cdrivers/pci/pcie_sifive.c new file +3
-0@@ -0,0 +1,797 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* SiFive FU740 DesignWare PCIe Controller Should we call this driver a DesgnWare PCIe controller (e.g.:
pcie_designware.c), instead ofpcie_sifive.c?
Quoted 1 line
The driver currently depends on fu740 drivers such as prci, clk, gpio and reset. probably rename it to
pcie_dw_sifive.clike other designware based driver. What do we think of it?
Is it possible to update the existing dw pcie driver to support fu740?
Depending on prci, clk and reset is not a problem. We can use dm_ APIs to hide device specific (prci, sifive-gpio) stuff.
Unless SiFive made significant changes to the designware PCIe IP, we should not create a new driver for it.
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
drivers/pci/pcie_sifive.c new file +13
-0+* +* Copyright (C) 2020-2021 SiFive, Inc. +* +* Based in early part on the i.MX6 PCIe host controller shim which is: +* +* Copyright (C) 2013 Kosagi +* http://www.kosagi.com +* +* Based on driver from author: Alan Mikhak <[email protected]> +*/ +#include "pcie_sifive.h" +#include <common.h> +#include <dm.h>
Quoted 8 lines
Quoted 8 lines
Quoted 6 lines
drivers/pci/pcie_sifive.c new file +6
-0+ +/* Host Bridge Identification */ +#define DEVICE_NAME "SiFive FU740 PCIe Host Controller" +#define VENDOR_ID 0x51fe +#define DEVICE_ID 0x51fe +[snip]
Regards,
Bin
PATCH 5/7 drivers: pci: add pcie support for fu740
Quoted 75 lines · Bin Meng
Quoted 21 lines · Green Wan
Bin Meng <[email protected]>? 2021?3?11? ?????10:14???
Quoted 17 lines · Green Wan
Quoted 15 lines
Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.
Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)Signed-off-by Green Wan <[email protected]>--- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pcie_sifive.c | 797++++++++++++++++++++++++++++++++++++++++++++++
Quoted 48 lines
Quoted 38 lines
Quoted 38 lines
drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++++++ 4 files changed, 1181 insertions(+) create mode 100644 drivers/pci/pcie_sifive.c create mode 100644 drivers/pci/pcie_sifive.hdrivers/pci/Kconfig +9
-0@@ -97,6 +97,15 @@ config PCIE_DW_MVEBU Armada-8K SoCs. The PCIe controller on Armada-8K is based on DesignWare hardware. +config PCIE_SIFIVE_FU740 + bool "Enable SiFive FU740 PCIe" + depends on CLK_SIFIVE_PRCI + depends on RESET_SIFIVE + depends on SIFIVE_GPIO + help + Say Y here if you want to enable PCIe controller support on + FU740. + config PCIE_FSL bool "FSL PowerPC PCIe support" depends on DM_PCIdrivers/pci/Makefile +1
-0@@ -51,3 +51,4 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o +obj-$(CONFIG_PCIE_SIFIVE_FU740) += pcie_sifive.odrivers/pci/pcie_sifive.c new file +0
-1--- /dev/nullQuoted 8 lines
drivers/pci/pcie_sifive.c line 3
Quoted 5 lines
+++
b/drivers/pci/pcie_sifive.cdrivers/pci/pcie_sifive.c new file +3
-0@@ -0,0 +1,797 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* SiFive FU740 DesignWare PCIe Controller Should we call this driver a DesgnWare PCIe controller (e.g.:
pcie_designware.c), instead ofpcie_sifive.c?Quoted 1 line
The driver currently depends on fu740 drivers such as prci, clk, gpio
and reset. probably rename it to
pcie_dw_sifive.clike other designware based driver. What do we think of it?
Quoted 8 lines
Is it possible to update the existing dw pcie driver to support fu740?
Depending on prci, clk and reset is not a problem. We can use
dm_APIs to hide device specific (prci, sifive-gpio) stuff.Unless SiFive made significant changes to the designware PCIe IP, we should not create a new driver for it.
Hi Bin,
So far, we'd like to maintain a sifive driver to handle the different sequences and changes. For example, we don't have a memory region start for phy registers but other platforms might have. Those differences and details might need info from other maintainers.
But I do agree with you that we should have certain level common code cross designware based drivers. Actually, I did give a try on merging them. But I lack the detail in the first attempt. Every driver looks has its own specialty. I wasn't 100% sure what the common we should have at the time.
Maybe we can create a "pcie_dw_common.c" or "pcie_designware.c" for all DWC IP and try to move common functions into it as a start. We can migrate some dw_pcie_xxx() and data structure from Linux. Then, I can do it on top of this patch as a RFC so it doesn't break current implementation. What do you think of it?
- Green
Quoted 30 lines
Quoted 7 lines
Quoted 7 lines
drivers/pci/pcie_sifive.c
Quoted 7 lines
drivers/pci/pcie_sifive.c new file +4
-0+* +* Copyright (C) 2020-2021 SiFive, Inc. +* +* Based in early part on the i.MX6 PCIe host controller shim which is:
Quoted 5 lines
Quoted 5 lines
drivers/pci/pcie_sifive.c
Quoted 5 lines
drivers/pci/pcie_sifive.c new file +5
-0+* +* Copyright (C) 2013 Kosagi +* http://www.kosagi.com +* +* Based on driver from author: Alan Mikhak < amikhak at wirelessfabric.com>
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
drivers/pci/pcie_sifive.c new file +4
-0+*/ +#include "pcie_sifive.h" +#include <common.h> +#include <dm.h> Quoted 8 lines
Quoted 8 lines
Quoted 6 lines
drivers/pci/pcie_sifive.c new file +6
-0+ +/* Host Bridge Identification */ +#define DEVICE_NAME "SiFive FU740 PCIe Host Controller" +#define VENDOR_ID 0x51fe +#define DEVICE_ID 0x51fe +[snip]
Regards,
Bin
PATCH 5/7 drivers: pci: add pcie support for fu740
Hi Green,
Quoted 86 lines · Green Wan
Quoted 73 lines · Bin Meng
Quoted 69 lines · Green Wan
Bin Meng <[email protected]>? 2021?3?11? ?????10:14???
Quoted 55 lines · Green Wan
Quoted 53 lines
Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.
Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)Signed-off-by Green Wan <[email protected]>--- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pcie_sifive.c | 797 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++++++ 4 files changed, 1181 insertions(+) create mode 100644 drivers/pci/pcie_sifive.c create mode 100644 drivers/pci/pcie_sifive.hdrivers/pci/Kconfig +9
-0@@ -97,6 +97,15 @@ config PCIE_DW_MVEBU Armada-8K SoCs. The PCIe controller on Armada-8K is based on DesignWare hardware. +config PCIE_SIFIVE_FU740 + bool "Enable SiFive FU740 PCIe" + depends on CLK_SIFIVE_PRCI + depends on RESET_SIFIVE + depends on SIFIVE_GPIO + help + Say Y here if you want to enable PCIe controller support on + FU740. + config PCIE_FSL bool "FSL PowerPC PCIe support" depends on DM_PCIdrivers/pci/Makefile +1
-0@@ -51,3 +51,4 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o +obj-$(CONFIG_PCIE_SIFIVE_FU740) += pcie_sifive.odrivers/pci/pcie_sifive.c new file +0
-1--- /dev/nullQuoted 8 lines
drivers/pci/pcie_sifive.c line 3
Quoted 5 lines
+++
b/drivers/pci/pcie_sifive.cdrivers/pci/pcie_sifive.c new file +3
-0@@ -0,0 +1,797 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* SiFive FU740 DesignWare PCIe Controller Should we call this driver a DesgnWare PCIe controller (e.g.:
pcie_designware.c), instead ofpcie_sifive.c?Quoted 1 line
The driver currently depends on fu740 drivers such as prci, clk, gpio and reset. probably rename it to
pcie_dw_sifive.clike other designware based driver. What do we think of it?Quoted 7 lines
Is it possible to update the existing dw pcie driver to support fu740?
Depending on prci, clk and reset is not a problem. We can use
dm_APIs to hide device specific (prci, sifive-gpio) stuff.Unless SiFive made significant changes to the designware PCIe IP, we should not create a new driver for it.
Quoted 7 lines
Hi Bin,
So far, we'd like to maintain a sifive driver to handle the different sequences and changes. For example, we don't have a memory region start for phy registers but other platforms might have. Those differences and details might need info from other maintainers.
But I do agree with you that we should have certain level common code cross designware based drivers. Actually, I did give a try on merging them. But I lack the detail in the first attempt. Every driver looks has its own specialty. I wasn't 100% sure what the common we should have at the time.
Maybe we can create a "
pcie_dw_common.c" or "pcie_designware.c" for all DWC IP and try to move common functions into it as a start. We can migrate somedw_pcie_xxx()and data structure from Linux. Then, I can do it on top of this patch as a RFC so it doesn't break current implementation. What do you think of it?
I think this approach makes sense.
Regards,
Bin
PATCH 6/7 board: sifive: add HiFive Unmatched board support
In reply to Green WanAdd dts, defconfig and board support for HiFive Unmatched.
--- arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi | 1489 ++++++++++++++++++++ arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi | 40 + arch/riscv/dts/hifive-unmatched-a00.dts | 263 ++++ board/sifive/fu540/Kconfig | 1 - board/sifive/fu540/fu540.c | 2 +- board/sifive/hifive_unmatched_fu740/Kconfig | 50 + board/sifive/hifive_unmatched_fu740/MAINTAINERS | 9 + board/sifive/hifive_unmatched_fu740/Makefile | 9 + .../hifive-unmatched-fu740.c | 24 + board/sifive/hifive_unmatched_fu740/spl.c | 85 ++ configs/sifive_hifive_unmatched_fu740_defconfig | 57 + doc/board/sifive/fu540.rst | 19 +- doc/board/sifive/hifive_unmatched_fu740.rst | 532 +++++++ drivers/reset/Kconfig | 2 +- include/configs/sifive-fu540.h | 5 - include/configs/sifive-hifive-unmatched-fu740.h | 88 ++ 16 files changed, 2656 insertions(+), 19 deletions(-) create mode 100644 arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00.dts create mode 100644 board/sifive/hifive_unmatched_fu740/Kconfig create mode 100644 board/sifive/hifive_unmatched_fu740/MAINTAINERS create mode 100644 board/sifive/hifive_unmatched_fu740/Makefile create mode 100644 board/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.c create mode 100644 board/sifive/hifive_unmatched_fu740/spl.c create mode 100644 configs/sifive_hifive_unmatched_fu740_defconfig create mode 100644 doc/board/sifive/hifive_unmatched_fu740.rst create mode 100644 include/configs/sifive-hifive-unmatched-fu740.h
arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi new file +1489 -0
@@ -0,0 +1,1489 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * (C) Copyright 2020-2021 SiFive, Inc + */ + +&dmc { + sifive,ddr-params = < + 0x00000a00 /* DENALI_CTL_00_DATA */ + 0x00000000 /* DENALI_CTL_01_DATA */ + 0x00000000 /* DENALI_CTL_02_DATA */ + 0x00000000 /* DENALI_CTL_03_DATA */ + 0x00000000 /* DENALI_CTL_04_DATA */ + 0x00000000 /* DENALI_CTL_05_DATA */ + 0x0000000a /* DENALI_CTL_06_DATA */ + 0x0002d362 /* DENALI_CTL_07_DATA */ + 0x00071073 /* DENALI_CTL_08_DATA */ + 0x0a1c0255 /* DENALI_CTL_09_DATA */ + 0x1c1c0400 /* DENALI_CTL_10_DATA */ + 0x0404c90b /* DENALI_CTL_11_DATA */ + 0x2b050405 /* DENALI_CTL_12_DATA */ + 0x0d0c081e /* DENALI_CTL_13_DATA */ + 0x08090914 /* DENALI_CTL_14_DATA */ + 0x00fde718 /* DENALI_CTL_15_DATA */ + 0x00180a05 /* DENALI_CTL_16_DATA */ + 0x008b130d /* DENALI_CTL_17_DATA */ + 0x01000118 /* DENALI_CTL_18_DATA */ + 0x0d032001 /* DENALI_CTL_19_DATA */ + 0x00000000 /* DENALI_CTL_20_DATA */ + 0x00000101 /* DENALI_CTL_21_DATA */ + 0x00000000 /* DENALI_CTL_22_DATA */ + 0x0a000000 /* DENALI_CTL_23_DATA */ + 0x00000000 /* DENALI_CTL_24_DATA */ + 0x01450100 /* DENALI_CTL_25_DATA */ + 0x00001c36 /* DENALI_CTL_26_DATA */ + 0x00000005 /* DENALI_CTL_27_DATA */ + 0x00170006 /* DENALI_CTL_28_DATA */ + 0x014e0400 /* DENALI_CTL_29_DATA */ + 0x03010000 /* DENALI_CTL_30_DATA */ + 0x000a0e00 /* DENALI_CTL_31_DATA */ + 0x04030200 /* DENALI_CTL_32_DATA */ + 0x0000031f /* DENALI_CTL_33_DATA */ + 0x00070004 /* DENALI_CTL_34_DATA */ + 0x00000000 /* DENALI_CTL_35_DATA */ + 0x00000000 /* DENALI_CTL_36_DATA */ + 0x00000000 /* DENALI_CTL_37_DATA */ + 0x00000000 /* DENALI_CTL_38_DATA */ + 0x00000000 /* DENALI_CTL_39_DATA */ + 0x00000000 /* DENALI_CTL_40_DATA */ + 0x00000000 /* DENALI_CTL_41_DATA */ + 0x00000000 /* DENALI_CTL_42_DATA */ + 0x00000000 /* DENALI_CTL_43_DATA */ + 0x00000000 /* DENALI_CTL_44_DATA */ + 0x00000000 /* DENALI_CTL_45_DATA */ + 0x00000000 /* DENALI_CTL_46_DATA */ + 0x00000000 /* DENALI_CTL_47_DATA */ + 0x00000000 /* DENALI_CTL_48_DATA */ + 0x00000000 /* DENALI_CTL_49_DATA */ + 0x00000000 /* DENALI_CTL_50_DATA */ + 0x00000000 /* DENALI_CTL_51_DATA */ + 0x00000000 /* DENALI_CTL_52_DATA */ + 0x00000000 /* DENALI_CTL_53_DATA */ + 0x00000000 /* DENALI_CTL_54_DATA */ + 0x00000000 /* DENALI_CTL_55_DATA */ + 0x00000000 /* DENALI_CTL_56_DATA */ + 0x00000000 /* DENALI_CTL_57_DATA */ + 0x00000000 /* DENALI_CTL_58_DATA */ + 0x00000000 /* DENALI_CTL_59_DATA */ + 0x00000424 /* DENALI_CTL_60_DATA */ + 0x00000201 /* DENALI_CTL_61_DATA */ + 0x00001008 /* DENALI_CTL_62_DATA */ + 0x00000000 /* DENALI_CTL_63_DATA */ + 0x00000200 /* DENALI_CTL_64_DATA */ + 0x00000800 /* DENALI_CTL_65_DATA */ + 0x00000481 /* DENALI_CTL_66_DATA */ + 0x00000400 /* DENALI_CTL_67_DATA */ + 0x00000424 /* DENALI_CTL_68_DATA */ + 0x00000201 /* DENALI_CTL_69_DATA */ + 0x00001008 /* DENALI_CTL_70_DATA */ + 0x00000000 /* DENALI_CTL_71_DATA */ + 0x00000200 /* DENALI_CTL_72_DATA */ + 0x00000800 /* DENALI_CTL_73_DATA */ + 0x00000481 /* DENALI_CTL_74_DATA */ + 0x00000400 /* DENALI_CTL_75_DATA */ + 0x01010000 /* DENALI_CTL_76_DATA */ + 0x00000000 /* DENALI_CTL_77_DATA */ + 0x00000000 /* DENALI_CTL_78_DATA */ + 0x00000000 /* DENALI_CTL_79_DATA */ + 0x00000000 /* DENALI_CTL_80_DATA */ + 0x00000000 /* DENALI_CTL_81_DATA */ + 0x00000000 /* DENALI_CTL_82_DATA */ + 0x00000000 /* DENALI_CTL_83_DATA */ + 0x00000000 /* DENALI_CTL_84_DATA */ + 0x00000000 /* DENALI_CTL_85_DATA */ + 0x00000000 /* DENALI_CTL_86_DATA */ + 0x00000000 /* DENALI_CTL_87_DATA */ + 0x00000000 /* DENALI_CTL_88_DATA */ + 0x00000000 /* DENALI_CTL_89_DATA */ + 0x00000000 /* DENALI_CTL_90_DATA */ + 0x00000000 /* DENALI_CTL_91_DATA */ + 0x00000000 /* DENALI_CTL_92_DATA */ + 0x00000000 /* DENALI_CTL_93_DATA */ + 0x00000000 /* DENALI_CTL_94_DATA */ + 0x00000000 /* DENALI_CTL_95_DATA */ + 0x00000000 /* DENALI_CTL_96_DATA */ + 0x00000000 /* DENALI_CTL_97_DATA */ + 0x00000000 /* DENALI_CTL_98_DATA */ + 0x00000000 /* DENALI_CTL_99_DATA */ + 0x00000000 /* DENALI_CTL_100_DATA */ + 0x00000000 /* DENALI_CTL_101_DATA */ + 0x00000000 /* DENALI_CTL_102_DATA */ + 0x00000000 /* DENALI_CTL_103_DATA */ + 0x00000000 /* DENALI_CTL_104_DATA */ + 0x00000003 /* DENALI_CTL_105_DATA */ + 0x00000000 /* DENALI_CTL_106_DATA */ + 0x00000000 /* DENALI_CTL_107_DATA */ + 0x00000000 /* DENALI_CTL_108_DATA */ + 0x00000000 /* DENALI_CTL_109_DATA */ + 0x01000000 /* DENALI_CTL_110_DATA */ + 0x00040000 /* DENALI_CTL_111_DATA */ + 0x00800200 /* DENALI_CTL_112_DATA */ + 0x00000200 /* DENALI_CTL_113_DATA */ + 0x00000040 /* DENALI_CTL_114_DATA */ + 0x01000100 /* DENALI_CTL_115_DATA */ + 0x0a000002 /* DENALI_CTL_116_DATA */ + 0x0101ffff /* DENALI_CTL_117_DATA */ + 0x01010101 /* DENALI_CTL_118_DATA */ + 0x01010101 /* DENALI_CTL_119_DATA */ + 0x0000010b /* DENALI_CTL_120_DATA */ + 0x00000c03 /* DENALI_CTL_121_DATA */ + 0x00000000 /* DENALI_CTL_122_DATA */ + 0x00000000 /* DENALI_CTL_123_DATA */ + 0x00000000 /* DENALI_CTL_124_DATA */ + 0x00000000 /* DENALI_CTL_125_DATA */ + 0x00030300 /* DENALI_CTL_126_DATA */ + 0x00000000 /* DENALI_CTL_127_DATA */ + 0x00010101 /* DENALI_CTL_128_DATA */ + 0x00000000 /* DENALI_CTL_129_DATA */ + 0x00000000 /* DENALI_CTL_130_DATA */ + 0x00000000 /* DENALI_CTL_131_DATA */ + 0x00000000 /* DENALI_CTL_132_DATA */ + 0x00000000 /* DENALI_CTL_133_DATA */ + 0x00000000 /* DENALI_CTL_134_DATA */ + 0x00000000 /* DENALI_CTL_135_DATA */ + 0x00000000 /* DENALI_CTL_136_DATA */ + 0x00000000 /* DENALI_CTL_137_DATA */ + 0x00000000 /* DENALI_CTL_138_DATA */ + 0x00000000 /* DENALI_CTL_139_DATA */ + 0x00000000 /* DENALI_CTL_140_DATA */ + 0x00000000 /* DENALI_CTL_141_DATA */ + 0x00000000 /* DENALI_CTL_142_DATA */ + 0x00000000 /* DENALI_CTL_143_DATA */ + 0x00000000 /* DENALI_CTL_144_DATA */ + 0x00000000 /* DENALI_CTL_145_DATA */ + 0x00000000 /* DENALI_CTL_146_DATA */ + 0x00000000 /* DENALI_CTL_147_DATA */ + 0x00000000 /* DENALI_CTL_148_DATA */ + 0x00000000 /* DENALI_CTL_149_DATA */ + 0x00000000 /* DENALI_CTL_150_DATA */ + 0x00000000 /* DENALI_CTL_151_DATA */ + 0x00000000 /* DENALI_CTL_152_DATA */ + 0x00000000 /* DENALI_CTL_153_DATA */ + 0x00000000 /* DENALI_CTL_154_DATA */ + 0x00000000 /* DENALI_CTL_155_DATA */ + 0x00000000 /* DENALI_CTL_156_DATA */ + 0x00000000 /* DENALI_CTL_157_DATA */ + 0x00000000 /* DENALI_CTL_158_DATA */ + 0x00000000 /* DENALI_CTL_159_DATA */ + 0x00000000 /* DENALI_CTL_160_DATA */ + 0x02010102 /* DENALI_CTL_161_DATA */ + 0x0108070d /* DENALI_CTL_162_DATA */ + 0x05050300 /* DENALI_CTL_163_DATA */ + 0x04000503 /* DENALI_CTL_164_DATA */ + 0x00000000 /* DENALI_CTL_165_DATA */ + 0x00000000 /* DENALI_CTL_166_DATA */ + 0x00000000 /* DENALI_CTL_167_DATA */ + 0x00000000 /* DENALI_CTL_168_DATA */ + 0x280d0000 /* DENALI_CTL_169_DATA */ + 0x01000000 /* DENALI_CTL_170_DATA */ + 0x00000000 /* DENALI_CTL_171_DATA */ + 0x00030001 /* DENALI_CTL_172_DATA */ + 0x00000000 /* DENALI_CTL_173_DATA */ + 0x00000000 /* DENALI_CTL_174_DATA */ + 0x00000000 /* DENALI_CTL_175_DATA */ + 0x00000000 /* DENALI_CTL_176_DATA */ + 0x00000000 /* DENALI_CTL_177_DATA */ + 0x00000000 /* DENALI_CTL_178_DATA */ + 0x00000000 /* DENALI_CTL_179_DATA */ + 0x00000000 /* DENALI_CTL_180_DATA */ + 0x01000000 /* DENALI_CTL_181_DATA */ + 0x00000001 /* DENALI_CTL_182_DATA */ + 0x00000100 /* DENALI_CTL_183_DATA */ + 0x00010303 /* DENALI_CTL_184_DATA */ + 0x67676701 /* DENALI_CTL_185_DATA */ + 0x67676767 /* DENALI_CTL_186_DATA */ + 0x67676767 /* DENALI_CTL_187_DATA */ + 0x67676767 /* DENALI_CTL_188_DATA */ + 0x67676767 /* DENALI_CTL_189_DATA */ + 0x67676767 /* DENALI_CTL_190_DATA */ + 0x67676767 /* DENALI_CTL_191_DATA */ + 0x67676767 /* DENALI_CTL_192_DATA */ + 0x67676767 /* DENALI_CTL_193_DATA */ + 0x01000067 /* DENALI_CTL_194_DATA */ + 0x00000001 /* DENALI_CTL_195_DATA */ + 0x00000101 /* DENALI_CTL_196_DATA */ + 0x00000000 /* DENALI_CTL_197_DATA */ + 0x00000000 /* DENALI_CTL_198_DATA */ + 0x00000000 /* DENALI_CTL_199_DATA */ + 0x00000000 /* DENALI_CTL_200_DATA */ + 0x00000000 /* DENALI_CTL_201_DATA */ + 0x00000000 /* DENALI_CTL_202_DATA */ + 0x00000000 /* DENALI_CTL_203_DATA */ + 0x00000000 /* DENALI_CTL_204_DATA */ + 0x00000000 /* DENALI_CTL_205_DATA */ + 0x00000000 /* DENALI_CTL_206_DATA */ + 0x00000000 /* DENALI_CTL_207_DATA */ + 0x00000001 /* DENALI_CTL_208_DATA */ + 0x00000000 /* DENALI_CTL_209_DATA */ + 0x007fffff /* DENALI_CTL_210_DATA */ + 0x00000000 /* DENALI_CTL_211_DATA */ + 0x007fffff /* DENALI_CTL_212_DATA */ + 0x00000000 /* DENALI_CTL_213_DATA */ + 0x007fffff /* DENALI_CTL_214_DATA */ + 0x00000000 /* DENALI_CTL_215_DATA */ + 0x007fffff /* DENALI_CTL_216_DATA */ + 0x00000000 /* DENALI_CTL_217_DATA */ + 0x007fffff /* DENALI_CTL_218_DATA */ + 0x00000000 /* DENALI_CTL_219_DATA */ + 0x007fffff /* DENALI_CTL_220_DATA */ + 0x00000000 /* DENALI_CTL_221_DATA */ + 0x007fffff /* DENALI_CTL_222_DATA */ + 0x00000000 /* DENALI_CTL_223_DATA */ + 0x037fffff /* DENALI_CTL_224_DATA */ + 0xffffffff /* DENALI_CTL_225_DATA */ + 0x000f000f /* DENALI_CTL_226_DATA */ + 0x00ffff03 /* DENALI_CTL_227_DATA */ + 0x000fffff /* DENALI_CTL_228_DATA */ + 0x0003000f /* DENALI_CTL_229_DATA */ + 0xffffffff /* DENALI_CTL_230_DATA */ + 0x000f000f /* DENALI_CTL_231_DATA */ + 0x00ffff03 /* DENALI_CTL_232_DATA */ + 0x000fffff /* DENALI_CTL_233_DATA */ + 0x0003000f /* DENALI_CTL_234_DATA */ + 0xffffffff /* DENALI_CTL_235_DATA */ + 0x000f000f /* DENALI_CTL_236_DATA */ + 0x00ffff03 /* DENALI_CTL_237_DATA */ + 0x000fffff /* DENALI_CTL_238_DATA */ + 0x0003000f /* DENALI_CTL_239_DATA */ + 0xffffffff /* DENALI_CTL_240_DATA */ + 0x000f000f /* DENALI_CTL_241_DATA */ + 0x00ffff03 /* DENALI_CTL_242_DATA */ + 0x000fffff /* DENALI_CTL_243_DATA */ + 0x6407000f /* DENALI_CTL_244_DATA */ + 0x01640001 /* DENALI_CTL_245_DATA */ + 0x00000000 /* DENALI_CTL_246_DATA */ + 0x00000000 /* DENALI_CTL_247_DATA */ + 0x00001800 /* DENALI_CTL_248_DATA */ + 0x00386c05 /* DENALI_CTL_249_DATA */ + 0x02000200 /* DENALI_CTL_250_DATA */ + 0x02000200 /* DENALI_CTL_251_DATA */ + 0x0000386c /* DENALI_CTL_252_DATA */ + 0x00023438 /* DENALI_CTL_253_DATA */ + 0x02020d0f /* DENALI_CTL_254_DATA */ + 0x00140303 /* DENALI_CTL_255_DATA */ + 0x00000000 /* DENALI_CTL_256_DATA */ + 0x00000000 /* DENALI_CTL_257_DATA */ + 0x00001403 /* DENALI_CTL_258_DATA */ + 0x00000000 /* DENALI_CTL_259_DATA */ + 0x00000000 /* DENALI_CTL_260_DATA */ + 0x00000000 /* DENALI_CTL_261_DATA */ + 0x00000000 /* DENALI_CTL_262_DATA */ + 0x0c010000 /* DENALI_CTL_263_DATA */ + 0x00000008 /* DENALI_CTL_264_DATA */ + 0x01375642 /* DENALI_PHY_00_DATA */ + 0x0004c008 /* DENALI_PHY_01_DATA */ + 0x000000da /* DENALI_PHY_02_DATA */ + 0x00000000 /* DENALI_PHY_03_DATA */ + 0x00000000 /* DENALI_PHY_04_DATA */ + 0x00010000 /* DENALI_PHY_05_DATA */ + 0x01DDDD90 /* DENALI_PHY_06_DATA */ + 0x01DDDD90 /* DENALI_PHY_07_DATA */ + 0x01030001 /* DENALI_PHY_08_DATA */ + 0x01000000 /* DENALI_PHY_09_DATA */ + 0x00c00000 /* DENALI_PHY_10_DATA */ + 0x00000007 /* DENALI_PHY_11_DATA */ + 0x00000000 /* DENALI_PHY_12_DATA */ + 0x00000000 /* DENALI_PHY_13_DATA */ + 0x04000408 /* DENALI_PHY_14_DATA */ + 0x00000408 /* DENALI_PHY_15_DATA */ + 0x00e4e400 /* DENALI_PHY_16_DATA */ + 0x00000000 /* DENALI_PHY_17_DATA */ + 0x00000000 /* DENALI_PHY_18_DATA */ + 0x00000000 /* DENALI_PHY_19_DATA */ + 0x00000000 /* DENALI_PHY_20_DATA */ + 0x00000000 /* DENALI_PHY_21_DATA */ + 0x00000000 /* DENALI_PHY_22_DATA */ + 0x00000000 /* DENALI_PHY_23_DATA */ + 0x00000000 /* DENALI_PHY_24_DATA */ + 0x00000000 /* DENALI_PHY_25_DATA */ + 0x00000000 /* DENALI_PHY_26_DATA */ + 0x00000000 /* DENALI_PHY_27_DATA */ + 0x00000000 /* DENALI_PHY_28_DATA */ + 0x00000000 /* DENALI_PHY_29_DATA */ + 0x00000000 /* DENALI_PHY_30_DATA */ + 0x00000000 /* DENALI_PHY_31_DATA */ + 0x00000000 /* DENALI_PHY_32_DATA */ + 0x00200000 /* DENALI_PHY_33_DATA */ + 0x00000000 /* DENALI_PHY_34_DATA */ + 0x00000000 /* DENALI_PHY_35_DATA */ + 0x00000000 /* DENALI_PHY_36_DATA */ + 0x00000000 /* DENALI_PHY_37_DATA */ + 0x00000000 /* DENALI_PHY_38_DATA */ + 0x00000000 /* DENALI_PHY_39_DATA */ + 0x02800280 /* DENALI_PHY_40_DATA */ + 0x02800280 /* DENALI_PHY_41_DATA */ + 0x02800280 /* DENALI_PHY_42_DATA */ + 0x02800280 /* DENALI_PHY_43_DATA */ + 0x00000280 /* DENALI_PHY_44_DATA */ + 0x00000000 /* DENALI_PHY_45_DATA */ + 0x00000000 /* DENALI_PHY_46_DATA */ + 0x00000000 /* DENALI_PHY_47_DATA */ + 0x00000000 /* DENALI_PHY_48_DATA */ + 0x00000000 /* DENALI_PHY_49_DATA */ + 0x00800080 /* DENALI_PHY_50_DATA */ + 0x00800080 /* DENALI_PHY_51_DATA */ + 0x00800080 /* DENALI_PHY_52_DATA */ + 0x00800080 /* DENALI_PHY_53_DATA */ + 0x00800080 /* DENALI_PHY_54_DATA */ + 0x00800080 /* DENALI_PHY_55_DATA */ + 0x00800080 /* DENALI_PHY_56_DATA */ + 0x00800080 /* DENALI_PHY_57_DATA */ + 0x00800080 /* DENALI_PHY_58_DATA */ + 0x000100da /* DENALI_PHY_59_DATA */ + 0x01ff0010 /* DENALI_PHY_60_DATA */ + 0x00000000 /* DENALI_PHY_61_DATA */ + 0x00000000 /* DENALI_PHY_62_DATA */ + 0x00000002 /* DENALI_PHY_63_DATA */ + 0x51313152 /* DENALI_PHY_64_DATA */ + 0x80013130 /* DENALI_PHY_65_DATA */ + 0x02000080 /* DENALI_PHY_66_DATA */ + 0x00100001 /* DENALI_PHY_67_DATA */ + 0x0c064208 /* DENALI_PHY_68_DATA */ + 0x000f0c0f /* DENALI_PHY_69_DATA */ + 0x01000140 /* DENALI_PHY_70_DATA */ + 0x0000000c /* DENALI_PHY_71_DATA */ + 0x00000000 /* DENALI_PHY_72_DATA */ + 0x00000000 /* DENALI_PHY_73_DATA */ + 0x00000000 /* DENALI_PHY_74_DATA */ + 0x00000000 /* DENALI_PHY_75_DATA */ + 0x00000000 /* DENALI_PHY_76_DATA */ + 0x00000000 /* DENALI_PHY_77_DATA */ + 0x00000000 /* DENALI_PHY_78_DATA */ + 0x00000000 /* DENALI_PHY_79_DATA */ + 0x00000000 /* DENALI_PHY_80_DATA */ + 0x00000000 /* DENALI_PHY_81_DATA */ + 0x00000000 /* DENALI_PHY_82_DATA */ + 0x00000000 /* DENALI_PHY_83_DATA */ + 0x00000000 /* DENALI_PHY_84_DATA */ + 0x00000000 /* DENALI_PHY_85_DATA */ + 0x00000000 /* DENALI_PHY_86_DATA */ + 0x00000000 /* DENALI_PHY_87_DATA */ + 0x00000000 /* DENALI_PHY_88_DATA */ + 0x00000000 /* DENALI_PHY_89_DATA */ + 0x00000000 /* DENALI_PHY_90_DATA */ + 0x00000000 /* DENALI_PHY_91_DATA */ + 0x00000000 /* DENALI_PHY_92_DATA */ + 0x00000000 /* DENALI_PHY_93_DATA */ + 0x00000000 /* DENALI_PHY_94_DATA */ + 0x00000000 /* DENALI_PHY_95_DATA */ + 0x00000000 /* DENALI_PHY_96_DATA */ + 0x00000000 /* DENALI_PHY_97_DATA */ + 0x00000000 /* DENALI_PHY_98_DATA */ + 0x00000000 /* DENALI_PHY_99_DATA */ + 0x00000000 /* DENALI_PHY_100_DATA */ + 0x00000000 /* DENALI_PHY_101_DATA */ + 0x00000000 /* DENALI_PHY_102_DATA */ + 0x00000000 /* DENALI_PHY_103_DATA */ + 0x00000000 /* DENALI_PHY_104_DATA */ + 0x00000000 /* DENALI_PHY_105_DATA */ + 0x00000000 /* DENALI_PHY_106_DATA */ + 0x00000000 /* DENALI_PHY_107_DATA */ + 0x00000000 /* DENALI_PHY_108_DATA */ + 0x00000000 /* DENALI_PHY_109_DATA */ + 0x00000000 /* DENALI_PHY_110_DATA */ + 0x00000000 /* DENALI_PHY_111_DATA */ + 0x00000000 /* DENALI_PHY_112_DATA */ + 0x00000000 /* DENALI_PHY_113_DATA */ + 0x00000000 /* DENALI_PHY_114_DATA */ + 0x00000000 /* DENALI_PHY_115_DATA */ + 0x00000000 /* DENALI_PHY_116_DATA */ + 0x00000000 /* DENALI_PHY_117_DATA */ + 0x00000000 /* DENALI_PHY_118_DATA */ + 0x00000000 /* DENALI_PHY_119_DATA */ + 0x00000000 /* DENALI_PHY_120_DATA */ + 0x00000000 /* DENALI_PHY_121_DATA */ + 0x00000000 /* DENALI_PHY_122_DATA */ + 0x00000000 /* DENALI_PHY_123_DATA */ + 0x00000000 /* DENALI_PHY_124_DATA */ + 0x00000000 /* DENALI_PHY_125_DATA */ + 0x00000000 /* DENALI_PHY_126_DATA */ + 0x00000000 /* DENALI_PHY_127_DATA */ + 0x40263571 /* DENALI_PHY_128_DATA */ + 0x0004c008 /* DENALI_PHY_129_DATA */ + 0x000000da /* DENALI_PHY_130_DATA */ + 0x00000000 /* DENALI_PHY_131_DATA */ + 0x00000000 /* DENALI_PHY_132_DATA */ + 0x00010000 /* DENALI_PHY_133_DATA */ + 0x01DDDD90 /* DENALI_PHY_134_DATA */ + 0x01DDDD90 /* DENALI_PHY_135_DATA */ + 0x01030001 /* DENALI_PHY_136_DATA */ + 0x01000000 /* DENALI_PHY_137_DATA */ + 0x00c00000 /* DENALI_PHY_138_DATA */ + 0x00000007 /* DENALI_PHY_139_DATA */ + 0x00000000 /* DENALI_PHY_140_DATA */ + 0x00000000 /* DENALI_PHY_141_DATA */ + 0x04000408 /* DENALI_PHY_142_DATA */ + 0x00000408 /* DENALI_PHY_143_DATA */ + 0x00e4e400 /* DENALI_PHY_144_DATA */ + 0x00000000 /* DENALI_PHY_145_DATA */ + 0x00000000 /* DENALI_PHY_146_DATA */ + 0x00000000 /* DENALI_PHY_147_DATA */ + 0x00000000 /* DENALI_PHY_148_DATA */ + 0x00000000 /* DENALI_PHY_149_DATA */ + 0x00000000 /* DENALI_PHY_150_DATA */ + 0x00000000 /* DENALI_PHY_151_DATA */ + 0x00000000 /* DENALI_PHY_152_DATA */ + 0x00000000 /* DENALI_PHY_153_DATA */ + 0x00000000 /* DENALI_PHY_154_DATA */ + 0x00000000 /* DENALI_PHY_155_DATA */ + 0x00000000 /* DENALI_PHY_156_DATA */ + 0x00000000 /* DENALI_PHY_157_DATA */ + 0x00000000 /* DENALI_PHY_158_DATA */ + 0x00000000 /* DENALI_PHY_159_DATA */ + 0x00000000 /* DENALI_PHY_160_DATA */ + 0x00200000 /* DENALI_PHY_161_DATA */ + 0x00000000 /* DENALI_PHY_162_DATA */ + 0x00000000 /* DENALI_PHY_163_DATA */ + 0x00000000 /* DENALI_PHY_164_DATA */ + 0x00000000 /* DENALI_PHY_165_DATA */ + 0x00000000 /* DENALI_PHY_166_DATA */ + 0x00000000 /* DENALI_PHY_167_DATA */ + 0x02800280 /* DENALI_PHY_168_DATA */ + 0x02800280 /* DENALI_PHY_169_DATA */ + 0x02800280 /* DENALI_PHY_170_DATA */ + 0x02800280 /* DENALI_PHY_171_DATA */ + 0x00000280 /* DENALI_PHY_172_DATA */ + 0x00000000 /* DENALI_PHY_173_DATA */ + 0x00000000 /* DENALI_PHY_174_DATA */ + 0x00000000 /* DENALI_PHY_175_DATA */ + 0x00000000 /* DENALI_PHY_176_DATA */ + 0x00000000 /* DENALI_PHY_177_DATA */ + 0x00800080 /* DENALI_PHY_178_DATA */ + 0x00800080 /* DENALI_PHY_179_DATA */ + 0x00800080 /* DENALI_PHY_180_DATA */ + 0x00800080 /* DENALI_PHY_181_DATA */ + 0x00800080 /* DENALI_PHY_182_DATA */ + 0x00800080 /* DENALI_PHY_183_DATA */ + 0x00800080 /* DENALI_PHY_184_DATA */ + 0x00800080 /* DENALI_PHY_185_DATA */ + 0x00800080 /* DENALI_PHY_186_DATA */ + 0x000100da /* DENALI_PHY_187_DATA */ + 0x01ff0010 /* DENALI_PHY_188_DATA */ + 0x00000000 /* DENALI_PHY_189_DATA */ + 0x00000000 /* DENALI_PHY_190_DATA */ + 0x00000002 /* DENALI_PHY_191_DATA */ + 0x51313152 /* DENALI_PHY_192_DATA */ + 0x80013130 /* DENALI_PHY_193_DATA */ + 0x02000080 /* DENALI_PHY_194_DATA */ + 0x00100001 /* DENALI_PHY_195_DATA */ + 0x0c064208 /* DENALI_PHY_196_DATA */ + 0x000f0c0f /* DENALI_PHY_197_DATA */ + 0x01000140 /* DENALI_PHY_198_DATA */ + 0x0000000c /* DENALI_PHY_199_DATA */ + 0x00000000 /* DENALI_PHY_200_DATA */ + 0x00000000 /* DENALI_PHY_201_DATA */ + 0x00000000 /* DENALI_PHY_202_DATA */ + 0x00000000 /* DENALI_PHY_203_DATA */ + 0x00000000 /* DENALI_PHY_204_DATA */ + 0x00000000 /* DENALI_PHY_205_DATA */ + 0x00000000 /* DENALI_PHY_206_DATA */ + 0x00000000 /* DENALI_PHY_207_DATA */ + 0x00000000 /* DENALI_PHY_208_DATA */ + 0x00000000 /* DENALI_PHY_209_DATA */ + 0x00000000 /* DENALI_PHY_210_DATA */ + 0x00000000 /* DENALI_PHY_211_DATA */ + 0x00000000 /* DENALI_PHY_212_DATA */ + 0x00000000 /* DENALI_PHY_213_DATA */ + 0x00000000 /* DENALI_PHY_214_DATA */ + 0x00000000 /* DENALI_PHY_215_DATA */ + 0x00000000 /* DENALI_PHY_216_DATA */ + 0x00000000 /* DENALI_PHY_217_DATA */ + 0x00000000 /* DENALI_PHY_218_DATA */ + 0x00000000 /* DENALI_PHY_219_DATA */ + 0x00000000 /* DENALI_PHY_220_DATA */ + 0x00000000 /* DENALI_PHY_221_DATA */ + 0x00000000 /* DENALI_PHY_222_DATA */ + 0x00000000 /* DENALI_PHY_223_DATA */ + 0x00000000 /* DENALI_PHY_224_DATA */ + 0x00000000 /* DENALI_PHY_225_DATA */ + 0x00000000 /* DENALI_PHY_226_DATA */ + 0x00000000 /* DENALI_PHY_227_DATA */ + 0x00000000 /* DENALI_PHY_228_DATA */ + 0x00000000 /* DENALI_PHY_229_DATA */ + 0x00000000 /* DENALI_PHY_230_DATA */ + 0x00000000 /* DENALI_PHY_231_DATA */ + 0x00000000 /* DENALI_PHY_232_DATA */ + 0x00000000 /* DENALI_PHY_233_DATA */ + 0x00000000 /* DENALI_PHY_234_DATA */ + 0x00000000 /* DENALI_PHY_235_DATA */ + 0x00000000 /* DENALI_PHY_236_DATA */ + 0x00000000 /* DENALI_PHY_237_DATA */ + 0x00000000 /* DENALI_PHY_238_DATA */ + 0x00000000 /* DENALI_PHY_239_DATA */ + 0x00000000 /* DENALI_PHY_240_DATA */ + 0x00000000 /* DENALI_PHY_241_DATA */ + 0x00000000 /* DENALI_PHY_242_DATA */ + 0x00000000 /* DENALI_PHY_243_DATA */ + 0x00000000 /* DENALI_PHY_244_DATA */ + 0x00000000 /* DENALI_PHY_245_DATA */ + 0x00000000 /* DENALI_PHY_246_DATA */ + 0x00000000 /* DENALI_PHY_247_DATA */ + 0x00000000 /* DENALI_PHY_248_DATA */ + 0x00000000 /* DENALI_PHY_249_DATA */ + 0x00000000 /* DENALI_PHY_250_DATA */ + 0x00000000 /* DENALI_PHY_251_DATA */ + 0x00000000 /* DENALI_PHY_252_DATA */ + 0x00000000 /* DENALI_PHY_253_DATA */ + 0x00000000 /* DENALI_PHY_254_DATA */ + 0x00000000 /* DENALI_PHY_255_DATA */ + 0x46052371 /* DENALI_PHY_256_DATA */ + 0x0004c008 /* DENALI_PHY_257_DATA */ + 0x000000da /* DENALI_PHY_258_DATA */ + 0x00000000 /* DENALI_PHY_259_DATA */ + 0x00000000 /* DENALI_PHY_260_DATA */ + 0x00010000 /* DENALI_PHY_261_DATA */ + 0x01DDDD90 /* DENALI_PHY_262_DATA */ + 0x01DDDD90 /* DENALI_PHY_263_DATA */ + 0x01030001 /* DENALI_PHY_264_DATA */ + 0x01000000 /* DENALI_PHY_265_DATA */ + 0x00c00000 /* DENALI_PHY_266_DATA */ + 0x00000007 /* DENALI_PHY_267_DATA */ + 0x00000000 /* DENALI_PHY_268_DATA */ + 0x00000000 /* DENALI_PHY_269_DATA */ + 0x04000408 /* DENALI_PHY_270_DATA */ + 0x00000408 /* DENALI_PHY_271_DATA */ + 0x00e4e400 /* DENALI_PHY_272_DATA */ + 0x00000000 /* DENALI_PHY_273_DATA */ + 0x00000000 /* DENALI_PHY_274_DATA */ + 0x00000000 /* DENALI_PHY_275_DATA */ + 0x00000000 /* DENALI_PHY_276_DATA */ + 0x00000000 /* DENALI_PHY_277_DATA */ + 0x00000000 /* DENALI_PHY_278_DATA */ + 0x00000000 /* DENALI_PHY_279_DATA */ + 0x00000000 /* DENALI_PHY_280_DATA */ + 0x00000000 /* DENALI_PHY_281_DATA */ + 0x00000000 /* DENALI_PHY_282_DATA */ + 0x00000000 /* DENALI_PHY_283_DATA */ + 0x00000000 /* DENALI_PHY_284_DATA */ + 0x00000000 /* DENALI_PHY_285_DATA */ + 0x00000000 /* DENALI_PHY_286_DATA */ + 0x00000000 /* DENALI_PHY_287_DATA */ + 0x00000000 /* DENALI_PHY_288_DATA */ + 0x00200000 /* DENALI_PHY_289_DATA */ + 0x00000000 /* DENALI_PHY_290_DATA */ + 0x00000000 /* DENALI_PHY_291_DATA */ + 0x00000000 /* DENALI_PHY_292_DATA */ + 0x00000000 /* DENALI_PHY_293_DATA */ + 0x00000000 /* DENALI_PHY_294_DATA */ + 0x00000000 /* DENALI_PHY_295_DATA */ + 0x02800280 /* DENALI_PHY_296_DATA */ + 0x02800280 /* DENALI_PHY_297_DATA */ + 0x02800280 /* DENALI_PHY_298_DATA */ + 0x02800280 /* DENALI_PHY_299_DATA */ + 0x00000280 /* DENALI_PHY_300_DATA */ + 0x00000000 /* DENALI_PHY_301_DATA */ + 0x00000000 /* DENALI_PHY_302_DATA */ + 0x00000000 /* DENALI_PHY_303_DATA */ + 0x00000000 /* DENALI_PHY_304_DATA */ + 0x00000000 /* DENALI_PHY_305_DATA */ + 0x00800080 /* DENALI_PHY_306_DATA */ + 0x00800080 /* DENALI_PHY_307_DATA */ + 0x00800080 /* DENALI_PHY_308_DATA */ + 0x00800080 /* DENALI_PHY_309_DATA */ + 0x00800080 /* DENALI_PHY_310_DATA */ + 0x00800080 /* DENALI_PHY_311_DATA */ + 0x00800080 /* DENALI_PHY_312_DATA */ + 0x00800080 /* DENALI_PHY_313_DATA */ + 0x00800080 /* DENALI_PHY_314_DATA */ + 0x000100da /* DENALI_PHY_315_DATA */ + 0x01ff0010 /* DENALI_PHY_316_DATA */ + 0x00000000 /* DENALI_PHY_317_DATA */ + 0x00000000 /* DENALI_PHY_318_DATA */ + 0x00000002 /* DENALI_PHY_319_DATA */ + 0x51313152 /* DENALI_PHY_320_DATA */ + 0x80013130 /* DENALI_PHY_321_DATA */ + 0x02000080 /* DENALI_PHY_322_DATA */ + 0x00100001 /* DENALI_PHY_323_DATA */ + 0x0c064208 /* DENALI_PHY_324_DATA */ + 0x000f0c0f /* DENALI_PHY_325_DATA */ + 0x01000140 /* DENALI_PHY_326_DATA */ + 0x0000000c /* DENALI_PHY_327_DATA */ + 0x00000000 /* DENALI_PHY_328_DATA */ + 0x00000000 /* DENALI_PHY_329_DATA */ + 0x00000000 /* DENALI_PHY_330_DATA */ + 0x00000000 /* DENALI_PHY_331_DATA */ + 0x00000000 /* DENALI_PHY_332_DATA */ + 0x00000000 /* DENALI_PHY_333_DATA */ + 0x00000000 /* DENALI_PHY_334_DATA */ + 0x00000000 /* DENALI_PHY_335_DATA */ + 0x00000000 /* DENALI_PHY_336_DATA */ + 0x00000000 /* DENALI_PHY_337_DATA */ + 0x00000000 /* DENALI_PHY_338_DATA */ + 0x00000000 /* DENALI_PHY_339_DATA */ + 0x00000000 /* DENALI_PHY_340_DATA */ + 0x00000000 /* DENALI_PHY_341_DATA */ + 0x00000000 /* DENALI_PHY_342_DATA */ + 0x00000000 /* DENALI_PHY_343_DATA */ + 0x00000000 /* DENALI_PHY_344_DATA */ + 0x00000000 /* DENALI_PHY_345_DATA */ + 0x00000000 /* DENALI_PHY_346_DATA */ + 0x00000000 /* DENALI_PHY_347_DATA */ + 0x00000000 /* DENALI_PHY_348_DATA */ + 0x00000000 /* DENALI_PHY_349_DATA */ + 0x00000000 /* DENALI_PHY_350_DATA */ + 0x00000000 /* DENALI_PHY_351_DATA */ + 0x00000000 /* DENALI_PHY_352_DATA */ + 0x00000000 /* DENALI_PHY_353_DATA */ + 0x00000000 /* DENALI_PHY_354_DATA */ + 0x00000000 /* DENALI_PHY_355_DATA */ + 0x00000000 /* DENALI_PHY_356_DATA */ + 0x00000000 /* DENALI_PHY_357_DATA */ + 0x00000000 /* DENALI_PHY_358_DATA */ + 0x00000000 /* DENALI_PHY_359_DATA */ + 0x00000000 /* DENALI_PHY_360_DATA */ + 0x00000000 /* DENALI_PHY_361_DATA */ + 0x00000000 /* DENALI_PHY_362_DATA */ + 0x00000000 /* DENALI_PHY_363_DATA */ + 0x00000000 /* DENALI_PHY_364_DATA */ + 0x00000000 /* DENALI_PHY_365_DATA */ + 0x00000000 /* DENALI_PHY_366_DATA */ + 0x00000000 /* DENALI_PHY_367_DATA */ + 0x00000000 /* DENALI_PHY_368_DATA */ + 0x00000000 /* DENALI_PHY_369_DATA */ + 0x00000000 /* DENALI_PHY_370_DATA */ + 0x00000000 /* DENALI_PHY_371_DATA */ + 0x00000000 /* DENALI_PHY_372_DATA */ + 0x00000000 /* DENALI_PHY_373_DATA */ + 0x00000000 /* DENALI_PHY_374_DATA */ + 0x00000000 /* DENALI_PHY_375_DATA */ + 0x00000000 /* DENALI_PHY_376_DATA */ + 0x00000000 /* DENALI_PHY_377_DATA */ + 0x00000000 /* DENALI_PHY_378_DATA */ + 0x00000000 /* DENALI_PHY_379_DATA */ + 0x00000000 /* DENALI_PHY_380_DATA */ + 0x00000000 /* DENALI_PHY_381_DATA */ + 0x00000000 /* DENALI_PHY_382_DATA */ + 0x00000000 /* DENALI_PHY_383_DATA */ + 0x37651240 /* DENALI_PHY_384_DATA */ + 0x0004c008 /* DENALI_PHY_385_DATA */ + 0x000000da /* DENALI_PHY_386_DATA */ + 0x00000000 /* DENALI_PHY_387_DATA */ + 0x00000000 /* DENALI_PHY_388_DATA */ + 0x00010000 /* DENALI_PHY_389_DATA */ + 0x01DDDD90 /* DENALI_PHY_390_DATA */ + 0x01DDDD90 /* DENALI_PHY_391_DATA */ + 0x01030001 /* DENALI_PHY_392_DATA */ + 0x01000000 /* DENALI_PHY_393_DATA */ + 0x00c00000 /* DENALI_PHY_394_DATA */ + 0x00000007 /* DENALI_PHY_395_DATA */ + 0x00000000 /* DENALI_PHY_396_DATA */ + 0x00000000 /* DENALI_PHY_397_DATA */ + 0x04000408 /* DENALI_PHY_398_DATA */ + 0x00000408 /* DENALI_PHY_399_DATA */ + 0x00e4e400 /* DENALI_PHY_400_DATA */ + 0x00000000 /* DENALI_PHY_401_DATA */ + 0x00000000 /* DENALI_PHY_402_DATA */ + 0x00000000 /* DENALI_PHY_403_DATA */ + 0x00000000 /* DENALI_PHY_404_DATA */ + 0x00000000 /* DENALI_PHY_405_DATA */ + 0x00000000 /* DENALI_PHY_406_DATA */ + 0x00000000 /* DENALI_PHY_407_DATA */ + 0x00000000 /* DENALI_PHY_408_DATA */ + 0x00000000 /* DENALI_PHY_409_DATA */ + 0x00000000 /* DENALI_PHY_410_DATA */ + 0x00000000 /* DENALI_PHY_411_DATA */ + 0x00000000 /* DENALI_PHY_412_DATA */ + 0x00000000 /* DENALI_PHY_413_DATA */ + 0x00000000 /* DENALI_PHY_414_DATA */ + 0x00000000 /* DENALI_PHY_415_DATA */ + 0x00000000 /* DENALI_PHY_416_DATA */ + 0x00200000 /* DENALI_PHY_417_DATA */ + 0x00000000 /* DENALI_PHY_418_DATA */ + 0x00000000 /* DENALI_PHY_419_DATA */ + 0x00000000 /* DENALI_PHY_420_DATA */ + 0x00000000 /* DENALI_PHY_421_DATA */ + 0x00000000 /* DENALI_PHY_422_DATA */ + 0x00000000 /* DENALI_PHY_423_DATA */ + 0x02800280 /* DENALI_PHY_424_DATA */ + 0x02800280 /* DENALI_PHY_425_DATA */ + 0x02800280 /* DENALI_PHY_426_DATA */ + 0x02800280 /* DENALI_PHY_427_DATA */ + 0x00000280 /* DENALI_PHY_428_DATA */ + 0x00000000 /* DENALI_PHY_429_DATA */ + 0x00000000 /* DENALI_PHY_430_DATA */ + 0x00000000 /* DENALI_PHY_431_DATA */ + 0x00000000 /* DENALI_PHY_432_DATA */ + 0x00000000 /* DENALI_PHY_433_DATA */ + 0x00800080 /* DENALI_PHY_434_DATA */ + 0x00800080 /* DENALI_PHY_435_DATA */ + 0x00800080 /* DENALI_PHY_436_DATA */ + 0x00800080 /* DENALI_PHY_437_DATA */ + 0x00800080 /* DENALI_PHY_438_DATA */ + 0x00800080 /* DENALI_PHY_439_DATA */ + 0x00800080 /* DENALI_PHY_440_DATA */ + 0x00800080 /* DENALI_PHY_441_DATA */ + 0x00800080 /* DENALI_PHY_442_DATA */ + 0x000100da /* DENALI_PHY_443_DATA */ + 0x01ff0010 /* DENALI_PHY_444_DATA */ + 0x00000000 /* DENALI_PHY_445_DATA */ + 0x00000000 /* DENALI_PHY_446_DATA */ + 0x00000002 /* DENALI_PHY_447_DATA */ + 0x51313152 /* DENALI_PHY_448_DATA */ + 0x80013130 /* DENALI_PHY_449_DATA */ + 0x02000080 /* DENALI_PHY_450_DATA */ + 0x00100001 /* DENALI_PHY_451_DATA */ + 0x0c064208 /* DENALI_PHY_452_DATA */ + 0x000f0c0f /* DENALI_PHY_453_DATA */ + 0x01000140 /* DENALI_PHY_454_DATA */ + 0x0000000c /* DENALI_PHY_455_DATA */ + 0x00000000 /* DENALI_PHY_456_DATA */ + 0x00000000 /* DENALI_PHY_457_DATA */ + 0x00000000 /* DENALI_PHY_458_DATA */ + 0x00000000 /* DENALI_PHY_459_DATA */ + 0x00000000 /* DENALI_PHY_460_DATA */ + 0x00000000 /* DENALI_PHY_461_DATA */ + 0x00000000 /* DENALI_PHY_462_DATA */ + 0x00000000 /* DENALI_PHY_463_DATA */ + 0x00000000 /* DENALI_PHY_464_DATA */ + 0x00000000 /* DENALI_PHY_465_DATA */ + 0x00000000 /* DENALI_PHY_466_DATA */ + 0x00000000 /* DENALI_PHY_467_DATA */ + 0x00000000 /* DENALI_PHY_468_DATA */ + 0x00000000 /* DENALI_PHY_469_DATA */ + 0x00000000 /* DENALI_PHY_470_DATA */ + 0x00000000 /* DENALI_PHY_471_DATA */ + 0x00000000 /* DENALI_PHY_472_DATA */ + 0x00000000 /* DENALI_PHY_473_DATA */ + 0x00000000 /* DENALI_PHY_474_DATA */ + 0x00000000 /* DENALI_PHY_475_DATA */ + 0x00000000 /* DENALI_PHY_476_DATA */ + 0x00000000 /* DENALI_PHY_477_DATA */ + 0x00000000 /* DENALI_PHY_478_DATA */ + 0x00000000 /* DENALI_PHY_479_DATA */ + 0x00000000 /* DENALI_PHY_480_DATA */ + 0x00000000 /* DENALI_PHY_481_DATA */ + 0x00000000 /* DENALI_PHY_482_DATA */ + 0x00000000 /* DENALI_PHY_483_DATA */ + 0x00000000 /* DENALI_PHY_484_DATA */ + 0x00000000 /* DENALI_PHY_485_DATA */ + 0x00000000 /* DENALI_PHY_486_DATA */ + 0x00000000 /* DENALI_PHY_487_DATA */ + 0x00000000 /* DENALI_PHY_488_DATA */ + 0x00000000 /* DENALI_PHY_489_DATA */ + 0x00000000 /* DENALI_PHY_490_DATA */ + 0x00000000 /* DENALI_PHY_491_DATA */ + 0x00000000 /* DENALI_PHY_492_DATA */ + 0x00000000 /* DENALI_PHY_493_DATA */ + 0x00000000 /* DENALI_PHY_494_DATA */ + 0x00000000 /* DENALI_PHY_495_DATA */ + 0x00000000 /* DENALI_PHY_496_DATA */ + 0x00000000 /* DENALI_PHY_497_DATA */ + 0x00000000 /* DENALI_PHY_498_DATA */ + 0x00000000 /* DENALI_PHY_499_DATA */ + 0x00000000 /* DENALI_PHY_500_DATA */ + 0x00000000 /* DENALI_PHY_501_DATA */ + 0x00000000 /* DENALI_PHY_502_DATA */ + 0x00000000 /* DENALI_PHY_503_DATA */ + 0x00000000 /* DENALI_PHY_504_DATA */ + 0x00000000 /* DENALI_PHY_505_DATA */ + 0x00000000 /* DENALI_PHY_506_DATA */ + 0x00000000 /* DENALI_PHY_507_DATA */ + 0x00000000 /* DENALI_PHY_508_DATA */ + 0x00000000 /* DENALI_PHY_509_DATA */ + 0x00000000 /* DENALI_PHY_510_DATA */ + 0x00000000 /* DENALI_PHY_511_DATA */ + 0x34216750 /* DENALI_PHY_512_DATA */ + 0x0004c008 /* DENALI_PHY_513_DATA */ + 0x000000da /* DENALI_PHY_514_DATA */ + 0x00000000 /* DENALI_PHY_515_DATA */ + 0x00000000 /* DENALI_PHY_516_DATA */ + 0x00010000 /* DENALI_PHY_517_DATA */ + 0x01DDDD90 /* DENALI_PHY_518_DATA */ + 0x01DDDD90 /* DENALI_PHY_519_DATA */ + 0x01030001 /* DENALI_PHY_520_DATA */ + 0x01000000 /* DENALI_PHY_521_DATA */ + 0x00c00000 /* DENALI_PHY_522_DATA */ + 0x00000007 /* DENALI_PHY_523_DATA */ + 0x00000000 /* DENALI_PHY_524_DATA */ + 0x00000000 /* DENALI_PHY_525_DATA */ + 0x04000408 /* DENALI_PHY_526_DATA */ + 0x00000408 /* DENALI_PHY_527_DATA */ + 0x00e4e400 /* DENALI_PHY_528_DATA */ + 0x00000000 /* DENALI_PHY_529_DATA */ + 0x00000000 /* DENALI_PHY_530_DATA */ + 0x00000000 /* DENALI_PHY_531_DATA */ + 0x00000000 /* DENALI_PHY_532_DATA */ + 0x00000000 /* DENALI_PHY_533_DATA */ + 0x00000000 /* DENALI_PHY_534_DATA */ + 0x00000000 /* DENALI_PHY_535_DATA */ + 0x00000000 /* DENALI_PHY_536_DATA */ + 0x00000000 /* DENALI_PHY_537_DATA */ + 0x00000000 /* DENALI_PHY_538_DATA */ + 0x00000000 /* DENALI_PHY_539_DATA */ + 0x00000000 /* DENALI_PHY_540_DATA */ + 0x00000000 /* DENALI_PHY_541_DATA */ + 0x00000000 /* DENALI_PHY_542_DATA */ + 0x00000000 /* DENALI_PHY_543_DATA */ + 0x00000000 /* DENALI_PHY_544_DATA */ + 0x00200000 /* DENALI_PHY_545_DATA */ + 0x00000000 /* DENALI_PHY_546_DATA */ + 0x00000000 /* DENALI_PHY_547_DATA */ + 0x00000000 /* DENALI_PHY_548_DATA */ + 0x00000000 /* DENALI_PHY_549_DATA */ + 0x00000000 /* DENALI_PHY_550_DATA */ + 0x00000000 /* DENALI_PHY_551_DATA */ + 0x02800280 /* DENALI_PHY_552_DATA */ + 0x02800280 /* DENALI_PHY_553_DATA */ + 0x02800280 /* DENALI_PHY_554_DATA */ + 0x02800280 /* DENALI_PHY_555_DATA */ + 0x00000280 /* DENALI_PHY_556_DATA */ + 0x00000000 /* DENALI_PHY_557_DATA */ + 0x00000000 /* DENALI_PHY_558_DATA */ + 0x00000000 /* DENALI_PHY_559_DATA */ + 0x00000000 /* DENALI_PHY_560_DATA */ + 0x00000000 /* DENALI_PHY_561_DATA */ + 0x00800080 /* DENALI_PHY_562_DATA */ + 0x00800080 /* DENALI_PHY_563_DATA */ + 0x00800080 /* DENALI_PHY_564_DATA */ + 0x00800080 /* DENALI_PHY_565_DATA */ + 0x00800080 /* DENALI_PHY_566_DATA */ + 0x00800080 /* DENALI_PHY_567_DATA */ + 0x00800080 /* DENALI_PHY_568_DATA */ + 0x00800080 /* DENALI_PHY_569_DATA */ + 0x00800080 /* DENALI_PHY_570_DATA */ + 0x000100da /* DENALI_PHY_571_DATA */ + 0x01ff0010 /* DENALI_PHY_572_DATA */ + 0x00000000 /* DENALI_PHY_573_DATA */ + 0x00000000 /* DENALI_PHY_574_DATA */ + 0x00000002 /* DENALI_PHY_575_DATA */ + 0x51313152 /* DENALI_PHY_576_DATA */ + 0x80013130 /* DENALI_PHY_577_DATA */ + 0x02000080 /* DENALI_PHY_578_DATA */ + 0x00100001 /* DENALI_PHY_579_DATA */ + 0x0c064208 /* DENALI_PHY_580_DATA */ + 0x000f0c0f /* DENALI_PHY_581_DATA */ + 0x01000140 /* DENALI_PHY_582_DATA */ + 0x0000000c /* DENALI_PHY_583_DATA */ + 0x00000000 /* DENALI_PHY_584_DATA */ + 0x00000000 /* DENALI_PHY_585_DATA */ + 0x00000000 /* DENALI_PHY_586_DATA */ + 0x00000000 /* DENALI_PHY_587_DATA */ + 0x00000000 /* DENALI_PHY_588_DATA */ + 0x00000000 /* DENALI_PHY_589_DATA */ + 0x00000000 /* DENALI_PHY_590_DATA */ + 0x00000000 /* DENALI_PHY_591_DATA */ + 0x00000000 /* DENALI_PHY_592_DATA */ + 0x00000000 /* DENALI_PHY_593_DATA */ + 0x00000000 /* DENALI_PHY_594_DATA */ + 0x00000000 /* DENALI_PHY_595_DATA */ + 0x00000000 /* DENALI_PHY_596_DATA */ + 0x00000000 /* DENALI_PHY_597_DATA */ + 0x00000000 /* DENALI_PHY_598_DATA */ + 0x00000000 /* DENALI_PHY_599_DATA */ + 0x00000000 /* DENALI_PHY_600_DATA */ + 0x00000000 /* DENALI_PHY_601_DATA */ + 0x00000000 /* DENALI_PHY_602_DATA */ + 0x00000000 /* DENALI_PHY_603_DATA */ + 0x00000000 /* DENALI_PHY_604_DATA */ + 0x00000000 /* DENALI_PHY_605_DATA */ + 0x00000000 /* DENALI_PHY_606_DATA */ + 0x00000000 /* DENALI_PHY_607_DATA */ + 0x00000000 /* DENALI_PHY_608_DATA */ + 0x00000000 /* DENALI_PHY_609_DATA */ + 0x00000000 /* DENALI_PHY_610_DATA */ + 0x00000000 /* DENALI_PHY_611_DATA */ + 0x00000000 /* DENALI_PHY_612_DATA */ + 0x00000000 /* DENALI_PHY_613_DATA */ + 0x00000000 /* DENALI_PHY_614_DATA */ + 0x00000000 /* DENALI_PHY_615_DATA */ + 0x00000000 /* DENALI_PHY_616_DATA */ + 0x00000000 /* DENALI_PHY_617_DATA */ + 0x00000000 /* DENALI_PHY_618_DATA */ + 0x00000000 /* DENALI_PHY_619_DATA */ + 0x00000000 /* DENALI_PHY_620_DATA */ + 0x00000000 /* DENALI_PHY_621_DATA */ + 0x00000000 /* DENALI_PHY_622_DATA */ + 0x00000000 /* DENALI_PHY_623_DATA */ + 0x00000000 /* DENALI_PHY_624_DATA */ + 0x00000000 /* DENALI_PHY_625_DATA */ + 0x00000000 /* DENALI_PHY_626_DATA */ + 0x00000000 /* DENALI_PHY_627_DATA */ + 0x00000000 /* DENALI_PHY_628_DATA */ + 0x00000000 /* DENALI_PHY_629_DATA */ + 0x00000000 /* DENALI_PHY_630_DATA */ + 0x00000000 /* DENALI_PHY_631_DATA */ + 0x00000000 /* DENALI_PHY_632_DATA */ + 0x00000000 /* DENALI_PHY_633_DATA */ + 0x00000000 /* DENALI_PHY_634_DATA */ + 0x00000000 /* DENALI_PHY_635_DATA */ + 0x00000000 /* DENALI_PHY_636_DATA */ + 0x00000000 /* DENALI_PHY_637_DATA */ + 0x00000000 /* DENALI_PHY_638_DATA */ + 0x00000000 /* DENALI_PHY_639_DATA */ + 0x35176402 /* DENALI_PHY_640_DATA */ + 0x0004c008 /* DENALI_PHY_641_DATA */ + 0x000000da /* DENALI_PHY_642_DATA */ + 0x00000000 /* DENALI_PHY_643_DATA */ + 0x00000000 /* DENALI_PHY_644_DATA */ + 0x00010000 /* DENALI_PHY_645_DATA */ + 0x01DDDD90 /* DENALI_PHY_646_DATA */ + 0x01DDDD90 /* DENALI_PHY_647_DATA */ + 0x01030001 /* DENALI_PHY_648_DATA */ + 0x01000000 /* DENALI_PHY_649_DATA */ + 0x00c00000 /* DENALI_PHY_650_DATA */ + 0x00000007 /* DENALI_PHY_651_DATA */ + 0x00000000 /* DENALI_PHY_652_DATA */ + 0x00000000 /* DENALI_PHY_653_DATA */ + 0x04000408 /* DENALI_PHY_654_DATA */ + 0x00000408 /* DENALI_PHY_655_DATA */ + 0x00e4e400 /* DENALI_PHY_656_DATA */ + 0x00000000 /* DENALI_PHY_657_DATA */ + 0x00000000 /* DENALI_PHY_658_DATA */ + 0x00000000 /* DENALI_PHY_659_DATA */ + 0x00000000 /* DENALI_PHY_660_DATA */ + 0x00000000 /* DENALI_PHY_661_DATA */ + 0x00000000 /* DENALI_PHY_662_DATA */ + 0x00000000 /* DENALI_PHY_663_DATA */ + 0x00000000 /* DENALI_PHY_664_DATA */ + 0x00000000 /* DENALI_PHY_665_DATA */ + 0x00000000 /* DENALI_PHY_666_DATA */ + 0x00000000 /* DENALI_PHY_667_DATA */ + 0x00000000 /* DENALI_PHY_668_DATA */ + 0x00000000 /* DENALI_PHY_669_DATA */ + 0x00000000 /* DENALI_PHY_670_DATA */ + 0x00000000 /* DENALI_PHY_671_DATA */ + 0x00000000 /* DENALI_PHY_672_DATA */ + 0x00200000 /* DENALI_PHY_673_DATA */ + 0x00000000 /* DENALI_PHY_674_DATA */ + 0x00000000 /* DENALI_PHY_675_DATA */ + 0x00000000 /* DENALI_PHY_676_DATA */ + 0x00000000 /* DENALI_PHY_677_DATA */ + 0x00000000 /* DENALI_PHY_678_DATA */ + 0x00000000 /* DENALI_PHY_679_DATA */ + 0x02800280 /* DENALI_PHY_680_DATA */ + 0x02800280 /* DENALI_PHY_681_DATA */ + 0x02800280 /* DENALI_PHY_682_DATA */ + 0x02800280 /* DENALI_PHY_683_DATA */ + 0x00000280 /* DENALI_PHY_684_DATA */ + 0x00000000 /* DENALI_PHY_685_DATA */ + 0x00000000 /* DENALI_PHY_686_DATA */ + 0x00000000 /* DENALI_PHY_687_DATA */ + 0x00000000 /* DENALI_PHY_688_DATA */ + 0x00000000 /* DENALI_PHY_689_DATA */ + 0x00800080 /* DENALI_PHY_690_DATA */ + 0x00800080 /* DENALI_PHY_691_DATA */ + 0x00800080 /* DENALI_PHY_692_DATA */ + 0x00800080 /* DENALI_PHY_693_DATA */ + 0x00800080 /* DENALI_PHY_694_DATA */ + 0x00800080 /* DENALI_PHY_695_DATA */ + 0x00800080 /* DENALI_PHY_696_DATA */ + 0x00800080 /* DENALI_PHY_697_DATA */ + 0x00800080 /* DENALI_PHY_698_DATA */ + 0x000100da /* DENALI_PHY_699_DATA */ + 0x01ff0010 /* DENALI_PHY_700_DATA */ + 0x00000000 /* DENALI_PHY_701_DATA */ + 0x00000000 /* DENALI_PHY_702_DATA */ + 0x00000002 /* DENALI_PHY_703_DATA */ + 0x51313152 /* DENALI_PHY_704_DATA */ + 0x80013130 /* DENALI_PHY_705_DATA */ + 0x02000080 /* DENALI_PHY_706_DATA */ + 0x00100001 /* DENALI_PHY_707_DATA */ + 0x0c064208 /* DENALI_PHY_708_DATA */ + 0x000f0c0f /* DENALI_PHY_709_DATA */ + 0x01000140 /* DENALI_PHY_710_DATA */ + 0x0000000c /* DENALI_PHY_711_DATA */ + 0x00000000 /* DENALI_PHY_712_DATA */ + 0x00000000 /* DENALI_PHY_713_DATA */ + 0x00000000 /* DENALI_PHY_714_DATA */ + 0x00000000 /* DENALI_PHY_715_DATA */ + 0x00000000 /* DENALI_PHY_716_DATA */ + 0x00000000 /* DENALI_PHY_717_DATA */ + 0x00000000 /* DENALI_PHY_718_DATA */ + 0x00000000 /* DENALI_PHY_719_DATA */ + 0x00000000 /* DENALI_PHY_720_DATA */ + 0x00000000 /* DENALI_PHY_721_DATA */ + 0x00000000 /* DENALI_PHY_722_DATA */ + 0x00000000 /* DENALI_PHY_723_DATA */ + 0x00000000 /* DENALI_PHY_724_DATA */ + 0x00000000 /* DENALI_PHY_725_DATA */ + 0x00000000 /* DENALI_PHY_726_DATA */ + 0x00000000 /* DENALI_PHY_727_DATA */ + 0x00000000 /* DENALI_PHY_728_DATA */ + 0x00000000 /* DENALI_PHY_729_DATA */ + 0x00000000 /* DENALI_PHY_730_DATA */ + 0x00000000 /* DENALI_PHY_731_DATA */ + 0x00000000 /* DENALI_PHY_732_DATA */ + 0x00000000 /* DENALI_PHY_733_DATA */ + 0x00000000 /* DENALI_PHY_734_DATA */ + 0x00000000 /* DENALI_PHY_735_DATA */ + 0x00000000 /* DENALI_PHY_736_DATA */ + 0x00000000 /* DENALI_PHY_737_DATA */ + 0x00000000 /* DENALI_PHY_738_DATA */ + 0x00000000 /* DENALI_PHY_739_DATA */ + 0x00000000 /* DENALI_PHY_740_DATA */ + 0x00000000 /* DENALI_PHY_741_DATA */ + 0x00000000 /* DENALI_PHY_742_DATA */ + 0x00000000 /* DENALI_PHY_743_DATA */ + 0x00000000 /* DENALI_PHY_744_DATA */ + 0x00000000 /* DENALI_PHY_745_DATA */ + 0x00000000 /* DENALI_PHY_746_DATA */ + 0x00000000 /* DENALI_PHY_747_DATA */ + 0x00000000 /* DENALI_PHY_748_DATA */ + 0x00000000 /* DENALI_PHY_749_DATA */ + 0x00000000 /* DENALI_PHY_750_DATA */ + 0x00000000 /* DENALI_PHY_751_DATA */ + 0x00000000 /* DENALI_PHY_752_DATA */ + 0x00000000 /* DENALI_PHY_753_DATA */ + 0x00000000 /* DENALI_PHY_754_DATA */ + 0x00000000 /* DENALI_PHY_755_DATA */ + 0x00000000 /* DENALI_PHY_756_DATA */ + 0x00000000 /* DENALI_PHY_757_DATA */ + 0x00000000 /* DENALI_PHY_758_DATA */ + 0x00000000 /* DENALI_PHY_759_DATA */ + 0x00000000 /* DENALI_PHY_760_DATA */ + 0x00000000 /* DENALI_PHY_761_DATA */ + 0x00000000 /* DENALI_PHY_762_DATA */ + 0x00000000 /* DENALI_PHY_763_DATA */ + 0x00000000 /* DENALI_PHY_764_DATA */ + 0x00000000 /* DENALI_PHY_765_DATA */ + 0x00000000 /* DENALI_PHY_766_DATA */ + 0x00000000 /* DENALI_PHY_767_DATA */ + 0x10526347 /* DENALI_PHY_768_DATA */ + 0x0004c008 /* DENALI_PHY_769_DATA */ + 0x000000da /* DENALI_PHY_770_DATA */ + 0x00000000 /* DENALI_PHY_771_DATA */ + 0x00000000 /* DENALI_PHY_772_DATA */ + 0x00010000 /* DENALI_PHY_773_DATA */ + 0x01DDDD90 /* DENALI_PHY_774_DATA */ + 0x01DDDD90 /* DENALI_PHY_775_DATA */ + 0x01030001 /* DENALI_PHY_776_DATA */ + 0x01000000 /* DENALI_PHY_777_DATA */ + 0x00c00000 /* DENALI_PHY_778_DATA */ + 0x00000007 /* DENALI_PHY_779_DATA */ + 0x00000000 /* DENALI_PHY_780_DATA */ + 0x00000000 /* DENALI_PHY_781_DATA */ + 0x04000408 /* DENALI_PHY_782_DATA */ + 0x00000408 /* DENALI_PHY_783_DATA */ + 0x00e4e400 /* DENALI_PHY_784_DATA */ + 0x00000000 /* DENALI_PHY_785_DATA */ + 0x00000000 /* DENALI_PHY_786_DATA */ + 0x00000000 /* DENALI_PHY_787_DATA */ + 0x00000000 /* DENALI_PHY_788_DATA */ + 0x00000000 /* DENALI_PHY_789_DATA */ + 0x00000000 /* DENALI_PHY_790_DATA */ + 0x00000000 /* DENALI_PHY_791_DATA */ + 0x00000000 /* DENALI_PHY_792_DATA */ + 0x00000000 /* DENALI_PHY_793_DATA */ + 0x00000000 /* DENALI_PHY_794_DATA */ + 0x00000000 /* DENALI_PHY_795_DATA */ + 0x00000000 /* DENALI_PHY_796_DATA */ + 0x00000000 /* DENALI_PHY_797_DATA */ + 0x00000000 /* DENALI_PHY_798_DATA */ + 0x00000000 /* DENALI_PHY_799_DATA */ + 0x00000000 /* DENALI_PHY_800_DATA */ + 0x00200000 /* DENALI_PHY_801_DATA */ + 0x00000000 /* DENALI_PHY_802_DATA */ + 0x00000000 /* DENALI_PHY_803_DATA */ + 0x00000000 /* DENALI_PHY_804_DATA */ + 0x00000000 /* DENALI_PHY_805_DATA */ + 0x00000000 /* DENALI_PHY_806_DATA */ + 0x00000000 /* DENALI_PHY_807_DATA */ + 0x02800280 /* DENALI_PHY_808_DATA */ + 0x02800280 /* DENALI_PHY_809_DATA */ + 0x02800280 /* DENALI_PHY_810_DATA */ + 0x02800280 /* DENALI_PHY_811_DATA */ + 0x00000280 /* DENALI_PHY_812_DATA */ + 0x00000000 /* DENALI_PHY_813_DATA */ + 0x00000000 /* DENALI_PHY_814_DATA */ + 0x00000000 /* DENALI_PHY_815_DATA */ + 0x00000000 /* DENALI_PHY_816_DATA */ + 0x00000000 /* DENALI_PHY_817_DATA */ + 0x00800080 /* DENALI_PHY_818_DATA */ + 0x00800080 /* DENALI_PHY_819_DATA */ + 0x00800080 /* DENALI_PHY_820_DATA */ + 0x00800080 /* DENALI_PHY_821_DATA */ + 0x00800080 /* DENALI_PHY_822_DATA */ + 0x00800080 /* DENALI_PHY_823_DATA */ + 0x00800080 /* DENALI_PHY_824_DATA */ + 0x00800080 /* DENALI_PHY_825_DATA */ + 0x00800080 /* DENALI_PHY_826_DATA */ + 0x000100da /* DENALI_PHY_827_DATA */ + 0x01ff0010 /* DENALI_PHY_828_DATA */ + 0x00000000 /* DENALI_PHY_829_DATA */ + 0x00000000 /* DENALI_PHY_830_DATA */ + 0x00000002 /* DENALI_PHY_831_DATA */ + 0x51313152 /* DENALI_PHY_832_DATA */ + 0x80013130 /* DENALI_PHY_833_DATA */ + 0x02000080 /* DENALI_PHY_834_DATA */ + 0x00100001 /* DENALI_PHY_835_DATA */ + 0x0c064208 /* DENALI_PHY_836_DATA */ + 0x000f0c0f /* DENALI_PHY_837_DATA */ + 0x01000140 /* DENALI_PHY_838_DATA */ + 0x0000000c /* DENALI_PHY_839_DATA */ + 0x00000000 /* DENALI_PHY_840_DATA */ + 0x00000000 /* DENALI_PHY_841_DATA */ + 0x00000000 /* DENALI_PHY_842_DATA */ + 0x00000000 /* DENALI_PHY_843_DATA */ + 0x00000000 /* DENALI_PHY_844_DATA */ + 0x00000000 /* DENALI_PHY_845_DATA */ + 0x00000000 /* DENALI_PHY_846_DATA */ + 0x00000000 /* DENALI_PHY_847_DATA */ + 0x00000000 /* DENALI_PHY_848_DATA */ + 0x00000000 /* DENALI_PHY_849_DATA */ + 0x00000000 /* DENALI_PHY_850_DATA */ + 0x00000000 /* DENALI_PHY_851_DATA */ + 0x00000000 /* DENALI_PHY_852_DATA */ + 0x00000000 /* DENALI_PHY_853_DATA */ + 0x00000000 /* DENALI_PHY_854_DATA */ + 0x00000000 /* DENALI_PHY_855_DATA */ + 0x00000000 /* DENALI_PHY_856_DATA */ + 0x00000000 /* DENALI_PHY_857_DATA */ + 0x00000000 /* DENALI_PHY_858_DATA */ + 0x00000000 /* DENALI_PHY_859_DATA */ + 0x00000000 /* DENALI_PHY_860_DATA */ + 0x00000000 /* DENALI_PHY_861_DATA */ + 0x00000000 /* DENALI_PHY_862_DATA */ + 0x00000000 /* DENALI_PHY_863_DATA */ + 0x00000000 /* DENALI_PHY_864_DATA */ + 0x00000000 /* DENALI_PHY_865_DATA */ + 0x00000000 /* DENALI_PHY_866_DATA */ + 0x00000000 /* DENALI_PHY_867_DATA */ + 0x00000000 /* DENALI_PHY_868_DATA */ + 0x00000000 /* DENALI_PHY_869_DATA */ + 0x00000000 /* DENALI_PHY_870_DATA */ + 0x00000000 /* DENALI_PHY_871_DATA */ + 0x00000000 /* DENALI_PHY_872_DATA */ + 0x00000000 /* DENALI_PHY_873_DATA */ + 0x00000000 /* DENALI_PHY_874_DATA */ + 0x00000000 /* DENALI_PHY_875_DATA */ + 0x00000000 /* DENALI_PHY_876_DATA */ + 0x00000000 /* DENALI_PHY_877_DATA */ + 0x00000000 /* DENALI_PHY_878_DATA */ + 0x00000000 /* DENALI_PHY_879_DATA */ + 0x00000000 /* DENALI_PHY_880_DATA */ + 0x00000000 /* DENALI_PHY_881_DATA */ + 0x00000000 /* DENALI_PHY_882_DATA */ + 0x00000000 /* DENALI_PHY_883_DATA */ + 0x00000000 /* DENALI_PHY_884_DATA */ + 0x00000000 /* DENALI_PHY_885_DATA */ + 0x00000000 /* DENALI_PHY_886_DATA */ + 0x00000000 /* DENALI_PHY_887_DATA */ + 0x00000000 /* DENALI_PHY_888_DATA */ + 0x00000000 /* DENALI_PHY_889_DATA */ + 0x00000000 /* DENALI_PHY_890_DATA */ + 0x00000000 /* DENALI_PHY_891_DATA */ + 0x00000000 /* DENALI_PHY_892_DATA */ + 0x00000000 /* DENALI_PHY_893_DATA */ + 0x00000000 /* DENALI_PHY_894_DATA */ + 0x00000000 /* DENALI_PHY_895_DATA */ + 0x41753260 /* DENALI_PHY_896_DATA */ + 0x0004c008 /* DENALI_PHY_897_DATA */ + 0x000000da /* DENALI_PHY_898_DATA */ + 0x00000000 /* DENALI_PHY_899_DATA */ + 0x00000000 /* DENALI_PHY_900_DATA */ + 0x00010000 /* DENALI_PHY_901_DATA */ + 0x01DDDD90 /* DENALI_PHY_902_DATA */ + 0x01DDDD90 /* DENALI_PHY_903_DATA */ + 0x01030001 /* DENALI_PHY_904_DATA */ + 0x01000000 /* DENALI_PHY_905_DATA */ + 0x00c00000 /* DENALI_PHY_906_DATA */ + 0x00000007 /* DENALI_PHY_907_DATA */ + 0x00000000 /* DENALI_PHY_908_DATA */ + 0x00000000 /* DENALI_PHY_909_DATA */ + 0x04000408 /* DENALI_PHY_910_DATA */ + 0x00000408 /* DENALI_PHY_911_DATA */ + 0x00e4e400 /* DENALI_PHY_912_DATA */ + 0x00000000 /* DENALI_PHY_913_DATA */ + 0x00000000 /* DENALI_PHY_914_DATA */ + 0x00000000 /* DENALI_PHY_915_DATA */ + 0x00000000 /* DENALI_PHY_916_DATA */ + 0x00000000 /* DENALI_PHY_917_DATA */ + 0x00000000 /* DENALI_PHY_918_DATA */ + 0x00000000 /* DENALI_PHY_919_DATA */ + 0x00000000 /* DENALI_PHY_920_DATA */ + 0x00000000 /* DENALI_PHY_921_DATA */ + 0x00000000 /* DENALI_PHY_922_DATA */ + 0x00000000 /* DENALI_PHY_923_DATA */ + 0x00000000 /* DENALI_PHY_924_DATA */ + 0x00000000 /* DENALI_PHY_925_DATA */ + 0x00000000 /* DENALI_PHY_926_DATA */ + 0x00000000 /* DENALI_PHY_927_DATA */ + 0x00000000 /* DENALI_PHY_928_DATA */ + 0x00200000 /* DENALI_PHY_929_DATA */ + 0x00000000 /* DENALI_PHY_930_DATA */ + 0x00000000 /* DENALI_PHY_931_DATA */ + 0x00000000 /* DENALI_PHY_932_DATA */ + 0x00000000 /* DENALI_PHY_933_DATA */ + 0x00000000 /* DENALI_PHY_934_DATA */ + 0x00000000 /* DENALI_PHY_935_DATA */ + 0x02800280 /* DENALI_PHY_936_DATA */ + 0x02800280 /* DENALI_PHY_937_DATA */ + 0x02800280 /* DENALI_PHY_938_DATA */ + 0x02800280 /* DENALI_PHY_939_DATA */ + 0x00000280 /* DENALI_PHY_940_DATA */ + 0x00000000 /* DENALI_PHY_941_DATA */ + 0x00000000 /* DENALI_PHY_942_DATA */ + 0x00000000 /* DENALI_PHY_943_DATA */ + 0x00000000 /* DENALI_PHY_944_DATA */ + 0x00000000 /* DENALI_PHY_945_DATA */ + 0x00800080 /* DENALI_PHY_946_DATA */ + 0x00800080 /* DENALI_PHY_947_DATA */ + 0x00800080 /* DENALI_PHY_948_DATA */ + 0x00800080 /* DENALI_PHY_949_DATA */ + 0x00800080 /* DENALI_PHY_950_DATA */ + 0x00800080 /* DENALI_PHY_951_DATA */ + 0x00800080 /* DENALI_PHY_952_DATA */ + 0x00800080 /* DENALI_PHY_953_DATA */ + 0x00800080 /* DENALI_PHY_954_DATA */ + 0x000100da /* DENALI_PHY_955_DATA */ + 0x01ff0010 /* DENALI_PHY_956_DATA */ + 0x00000000 /* DENALI_PHY_957_DATA */ + 0x00000000 /* DENALI_PHY_958_DATA */ + 0x00000002 /* DENALI_PHY_959_DATA */ + 0x51313152 /* DENALI_PHY_960_DATA */ + 0x80013130 /* DENALI_PHY_961_DATA */ + 0x02000080 /* DENALI_PHY_962_DATA */ + 0x00100001 /* DENALI_PHY_963_DATA */ + 0x0c064208 /* DENALI_PHY_964_DATA */ + 0x000f0c0f /* DENALI_PHY_965_DATA */ + 0x01000140 /* DENALI_PHY_966_DATA */ + 0x0000000c /* DENALI_PHY_967_DATA */ + 0x00000000 /* DENALI_PHY_968_DATA */ + 0x00000000 /* DENALI_PHY_969_DATA */ + 0x00000000 /* DENALI_PHY_970_DATA */ + 0x00000000 /* DENALI_PHY_971_DATA */ + 0x00000000 /* DENALI_PHY_972_DATA */ + 0x00000000 /* DENALI_PHY_973_DATA */ + 0x00000000 /* DENALI_PHY_974_DATA */ + 0x00000000 /* DENALI_PHY_975_DATA */ + 0x00000000 /* DENALI_PHY_976_DATA */ + 0x00000000 /* DENALI_PHY_977_DATA */ + 0x00000000 /* DENALI_PHY_978_DATA */ + 0x00000000 /* DENALI_PHY_979_DATA */ + 0x00000000 /* DENALI_PHY_980_DATA */ + 0x00000000 /* DENALI_PHY_981_DATA */ + 0x00000000 /* DENALI_PHY_982_DATA */ + 0x00000000 /* DENALI_PHY_983_DATA */ + 0x00000000 /* DENALI_PHY_984_DATA */ + 0x00000000 /* DENALI_PHY_985_DATA */ + 0x00000000 /* DENALI_PHY_986_DATA */ + 0x00000000 /* DENALI_PHY_987_DATA */ + 0x00000000 /* DENALI_PHY_988_DATA */ + 0x00000000 /* DENALI_PHY_989_DATA */ + 0x00000000 /* DENALI_PHY_990_DATA */ + 0x00000000 /* DENALI_PHY_991_DATA */ + 0x00000000 /* DENALI_PHY_992_DATA */ + 0x00000000 /* DENALI_PHY_993_DATA */ + 0x00000000 /* DENALI_PHY_994_DATA */ + 0x00000000 /* DENALI_PHY_995_DATA */ + 0x00000000 /* DENALI_PHY_996_DATA */ + 0x00000000 /* DENALI_PHY_997_DATA */ + 0x00000000 /* DENALI_PHY_998_DATA */ + 0x00000000 /* DENALI_PHY_999_DATA */ + 0x00000000 /* DENALI_PHY_1000_DATA */ + 0x00000000 /* DENALI_PHY_1001_DATA */ + 0x00000000 /* DENALI_PHY_1002_DATA */ + 0x00000000 /* DENALI_PHY_1003_DATA */ + 0x00000000 /* DENALI_PHY_1004_DATA */ + 0x00000000 /* DENALI_PHY_1005_DATA */ + 0x00000000 /* DENALI_PHY_1006_DATA */ + 0x00000000 /* DENALI_PHY_1007_DATA */ + 0x00000000 /* DENALI_PHY_1008_DATA */ + 0x00000000 /* DENALI_PHY_1009_DATA */ + 0x00000000 /* DENALI_PHY_1010_DATA */ + 0x00000000 /* DENALI_PHY_1011_DATA */ + 0x00000000 /* DENALI_PHY_1012_DATA */ + 0x00000000 /* DENALI_PHY_1013_DATA */ + 0x00000000 /* DENALI_PHY_1014_DATA */ + 0x00000000 /* DENALI_PHY_1015_DATA */ + 0x00000000 /* DENALI_PHY_1016_DATA */ + 0x00000000 /* DENALI_PHY_1017_DATA */ + 0x00000000 /* DENALI_PHY_1018_DATA */ + 0x00000000 /* DENALI_PHY_1019_DATA */ + 0x00000000 /* DENALI_PHY_1020_DATA */ + 0x00000000 /* DENALI_PHY_1021_DATA */ + 0x00000000 /* DENALI_PHY_1022_DATA */ + 0x00000000 /* DENALI_PHY_1023_DATA */ + 0x76543210 /* DENALI_PHY_1024_DATA */ + 0x0004c008 /* DENALI_PHY_1025_DATA */ + 0x000000da /* DENALI_PHY_1026_DATA */ + 0x00000000 /* DENALI_PHY_1027_DATA */ + 0x00000000 /* DENALI_PHY_1028_DATA */ + 0x00010000 /* DENALI_PHY_1029_DATA */ + 0x01665555 /* DENALI_PHY_1030_DATA */ + 0x01665555 /* DENALI_PHY_1031_DATA */ + 0x01030001 /* DENALI_PHY_1032_DATA */ + 0x01000000 /* DENALI_PHY_1033_DATA */ + 0x00c00000 /* DENALI_PHY_1034_DATA */ + 0x00000007 /* DENALI_PHY_1035_DATA */ + 0x00000000 /* DENALI_PHY_1036_DATA */ + 0x00000000 /* DENALI_PHY_1037_DATA */ + 0x04000408 /* DENALI_PHY_1038_DATA */ + 0x00000408 /* DENALI_PHY_1039_DATA */ + 0x00e4e400 /* DENALI_PHY_1040_DATA */ + 0x00000000 /* DENALI_PHY_1041_DATA */ + 0x00000000 /* DENALI_PHY_1042_DATA */ + 0x00000000 /* DENALI_PHY_1043_DATA */ + 0x00000000 /* DENALI_PHY_1044_DATA */ + 0x00000000 /* DENALI_PHY_1045_DATA */ + 0x00000000 /* DENALI_PHY_1046_DATA */ + 0x00000000 /* DENALI_PHY_1047_DATA */ + 0x00000000 /* DENALI_PHY_1048_DATA */ + 0x00000000 /* DENALI_PHY_1049_DATA */ + 0x00000000 /* DENALI_PHY_1050_DATA */ + 0x00000000 /* DENALI_PHY_1051_DATA */ + 0x00000000 /* DENALI_PHY_1052_DATA */ + 0x00000000 /* DENALI_PHY_1053_DATA */ + 0x00000000 /* DENALI_PHY_1054_DATA */ + 0x00000000 /* DENALI_PHY_1055_DATA */ + 0x00000000 /* DENALI_PHY_1056_DATA */ + 0x00200000 /* DENALI_PHY_1057_DATA */ + 0x00000000 /* DENALI_PHY_1058_DATA */ + 0x00000000 /* DENALI_PHY_1059_DATA */ + 0x00000000 /* DENALI_PHY_1060_DATA */ + 0x00000000 /* DENALI_PHY_1061_DATA */ + 0x00000000 /* DENALI_PHY_1062_DATA */ + 0x00000000 /* DENALI_PHY_1063_DATA */ + 0x02800280 /* DENALI_PHY_1064_DATA */ + 0x02800280 /* DENALI_PHY_1065_DATA */ + 0x02800280 /* DENALI_PHY_1066_DATA */ + 0x02800280 /* DENALI_PHY_1067_DATA */ + 0x00000280 /* DENALI_PHY_1068_DATA */ + 0x00000000 /* DENALI_PHY_1069_DATA */ + 0x00000000 /* DENALI_PHY_1070_DATA */ + 0x00000000 /* DENALI_PHY_1071_DATA */ + 0x00000000 /* DENALI_PHY_1072_DATA */ + 0x00000000 /* DENALI_PHY_1073_DATA */ + 0x00800080 /* DENALI_PHY_1074_DATA */ + 0x00800080 /* DENALI_PHY_1075_DATA */ + 0x00800080 /* DENALI_PHY_1076_DATA */ + 0x00800080 /* DENALI_PHY_1077_DATA */ + 0x00800080 /* DENALI_PHY_1078_DATA */ + 0x00800080 /* DENALI_PHY_1079_DATA */ + 0x00800080 /* DENALI_PHY_1080_DATA */ + 0x00800080 /* DENALI_PHY_1081_DATA */ + 0x00800080 /* DENALI_PHY_1082_DATA */ + 0x000100da /* DENALI_PHY_1083_DATA */ + 0x01ff0010 /* DENALI_PHY_1084_DATA */ + 0x00000000 /* DENALI_PHY_1085_DATA */ + 0x00000000 /* DENALI_PHY_1086_DATA */ + 0x00000002 /* DENALI_PHY_1087_DATA */ + 0x51313152 /* DENALI_PHY_1088_DATA */ + 0x80013130 /* DENALI_PHY_1089_DATA */ + 0x02000080 /* DENALI_PHY_1090_DATA */ + 0x00100001 /* DENALI_PHY_1091_DATA */ + 0x0c064208 /* DENALI_PHY_1092_DATA */ + 0x000f0c0f /* DENALI_PHY_1093_DATA */ + 0x01000140 /* DENALI_PHY_1094_DATA */ + 0x0000000c /* DENALI_PHY_1095_DATA */ + 0x00000000 /* DENALI_PHY_1096_DATA */ + 0x00000000 /* DENALI_PHY_1097_DATA */ + 0x00000000 /* DENALI_PHY_1098_DATA */ + 0x00000000 /* DENALI_PHY_1099_DATA */ + 0x00000000 /* DENALI_PHY_1100_DATA */ + 0x00000000 /* DENALI_PHY_1101_DATA */ + 0x00000000 /* DENALI_PHY_1102_DATA */ + 0x00000000 /* DENALI_PHY_1103_DATA */ + 0x00000000 /* DENALI_PHY_1104_DATA */ + 0x00000000 /* DENALI_PHY_1105_DATA */ + 0x00000000 /* DENALI_PHY_1106_DATA */ + 0x00000000 /* DENALI_PHY_1107_DATA */ + 0x00000000 /* DENALI_PHY_1108_DATA */ + 0x00000000 /* DENALI_PHY_1109_DATA */ + 0x00000000 /* DENALI_PHY_1110_DATA */ + 0x00000000 /* DENALI_PHY_1111_DATA */ + 0x00000000 /* DENALI_PHY_1112_DATA */ + 0x00000000 /* DENALI_PHY_1113_DATA */ + 0x00000000 /* DENALI_PHY_1114_DATA */ + 0x00000000 /* DENALI_PHY_1115_DATA */ + 0x00000000 /* DENALI_PHY_1116_DATA */ + 0x00000000 /* DENALI_PHY_1117_DATA */ + 0x00000000 /* DENALI_PHY_1118_DATA */ + 0x00000000 /* DENALI_PHY_1119_DATA */ + 0x00000000 /* DENALI_PHY_1120_DATA */ + 0x00000000 /* DENALI_PHY_1121_DATA */ + 0x00000000 /* DENALI_PHY_1122_DATA */ + 0x00000000 /* DENALI_PHY_1123_DATA */ + 0x00000000 /* DENALI_PHY_1124_DATA */ + 0x00000000 /* DENALI_PHY_1125_DATA */ + 0x00000000 /* DENALI_PHY_1126_DATA */ + 0x00000000 /* DENALI_PHY_1127_DATA */ + 0x00000000 /* DENALI_PHY_1128_DATA */ + 0x00000000 /* DENALI_PHY_1129_DATA */ + 0x00000000 /* DENALI_PHY_1130_DATA */ + 0x00000000 /* DENALI_PHY_1131_DATA */ + 0x00000000 /* DENALI_PHY_1132_DATA */ + 0x00000000 /* DENALI_PHY_1133_DATA */ + 0x00000000 /* DENALI_PHY_1134_DATA */ + 0x00000000 /* DENALI_PHY_1135_DATA */ + 0x00000000 /* DENALI_PHY_1136_DATA */ + 0x00000000 /* DENALI_PHY_1137_DATA */ + 0x00000000 /* DENALI_PHY_1138_DATA */ + 0x00000000 /* DENALI_PHY_1139_DATA */ + 0x00000000 /* DENALI_PHY_1140_DATA */ + 0x00000000 /* DENALI_PHY_1141_DATA */ + 0x00000000 /* DENALI_PHY_1142_DATA */ + 0x00000000 /* DENALI_PHY_1143_DATA */ + 0x00000000 /* DENALI_PHY_1144_DATA */ + 0x00000000 /* DENALI_PHY_1145_DATA */ + 0x00000000 /* DENALI_PHY_1146_DATA */ + 0x00000000 /* DENALI_PHY_1147_DATA */ + 0x00000000 /* DENALI_PHY_1148_DATA */ + 0x00000000 /* DENALI_PHY_1149_DATA */ + 0x00000000 /* DENALI_PHY_1150_DATA */ + 0x00000000 /* DENALI_PHY_1151_DATA */ + 0x00000000 /* DENALI_PHY_1152_DATA */ + 0x00000000 /* DENALI_PHY_1153_DATA */ + 0x00050000 /* DENALI_PHY_1154_DATA */ + 0x00000000 /* DENALI_PHY_1155_DATA */ + 0x00000000 /* DENALI_PHY_1156_DATA */ + 0x00000000 /* DENALI_PHY_1157_DATA */ + 0x00000100 /* DENALI_PHY_1158_DATA */ + 0x00000000 /* DENALI_PHY_1159_DATA */ + 0x00000000 /* DENALI_PHY_1160_DATA */ + 0x00506401 /* DENALI_PHY_1161_DATA */ + 0x01221102 /* DENALI_PHY_1162_DATA */ + 0x00000122 /* DENALI_PHY_1163_DATA */ + 0x00000000 /* DENALI_PHY_1164_DATA */ + 0x000B1F00 /* DENALI_PHY_1165_DATA */ + 0x0B1F0B1F /* DENALI_PHY_1166_DATA */ + 0x0B1F0B1F /* DENALI_PHY_1167_DATA */ + 0x0B1F0B1F /* DENALI_PHY_1168_DATA */ + 0x0B1F0B1F /* DENALI_PHY_1169_DATA */ + 0x00000B00 /* DENALI_PHY_1170_DATA */ + 0x42080010 /* DENALI_PHY_1171_DATA */ + 0x01000100 /* DENALI_PHY_1172_DATA */ + 0x01000100 /* DENALI_PHY_1173_DATA */ + 0x01000100 /* DENALI_PHY_1174_DATA */ + 0x01000100 /* DENALI_PHY_1175_DATA */ + 0x00000000 /* DENALI_PHY_1176_DATA */ + 0x00000000 /* DENALI_PHY_1177_DATA */ + 0x00000000 /* DENALI_PHY_1178_DATA */ + 0x00000000 /* DENALI_PHY_1179_DATA */ + 0x00000000 /* DENALI_PHY_1180_DATA */ + 0x00000803 /* DENALI_PHY_1181_DATA */ + 0x223FFF00 /* DENALI_PHY_1182_DATA */ + 0x000008FF /* DENALI_PHY_1183_DATA */ + 0x0000057F /* DENALI_PHY_1184_DATA */ + 0x0000057F /* DENALI_PHY_1185_DATA */ + 0x00037FFF /* DENALI_PHY_1186_DATA */ + 0x00037FFF /* DENALI_PHY_1187_DATA */ + 0x00004410 /* DENALI_PHY_1188_DATA */ + 0x00004410 /* DENALI_PHY_1189_DATA */ + 0x00004410 /* DENALI_PHY_1190_DATA */ + 0x00004410 /* DENALI_PHY_1191_DATA */ + 0x00004410 /* DENALI_PHY_1192_DATA */ + 0x00000111 /* DENALI_PHY_1193_DATA */ + 0x00000111 /* DENALI_PHY_1194_DATA */ + 0x00000000 /* DENALI_PHY_1195_DATA */ + 0x00000000 /* DENALI_PHY_1196_DATA */ + 0x00000000 /* DENALI_PHY_1197_DATA */ + 0x04000000 /* DENALI_PHY_1198_DATA */ + 0x00000000 /* DENALI_PHY_1199_DATA */ + 0x00000000 /* DENALI_PHY_1200_DATA */ + 0x00000108 /* DENALI_PHY_1201_DATA */ + 0x00000000 /* DENALI_PHY_1202_DATA */ + 0x00000000 /* DENALI_PHY_1203_DATA */ + 0x00000000 /* DENALI_PHY_1204_DATA */ + 0x00000001 /* DENALI_PHY_1205_DATA */ + 0x00000000 /* DENALI_PHY_1206_DATA */ + 0x00000000 /* DENALI_PHY_1207_DATA */ + 0x00000000 /* DENALI_PHY_1208_DATA */ + 0x00000000 /* DENALI_PHY_1209_DATA */ + 0x00000000 /* DENALI_PHY_1210_DATA */ + 0x00000000 /* DENALI_PHY_1211_DATA */ + 0x00020100 /* DENALI_PHY_1212_DATA */ + 0x00000000 /* DENALI_PHY_1213_DATA */ + 0x00000000 /* DENALI_PHY_1214_DATA */ + >; +};
arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi new file +40 -0
@@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020-2021 SiFive, Inc + */ + +#include "fu740-c000-u-boot.dtsi" +#include "fu740-hifive-unmatched-a00-ddr.dtsi" + +/ { + aliases { + spi0 = &spi0; + }; + + memory at 80000000 { + u-boot,dm-spl; + }; + + hfclk { + u-boot,dm-spl; + }; + + rtcclk { + u-boot,dm-spl; + }; + +}; + +&clint { + clocks = <&rtcclk>; +}; + +&spi0 { + mmc at 0 { + u-boot,dm-spl; + }; +}; + +&gpio { + u-boot,dm-spl; +};
arch/riscv/dts/hifive-unmatched-a00.dts new file +263 -0
263 lines not on this page · raw message
board/sifive/fu540/Kconfig +0 -1
@@ -47,6 +47,5 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply SPI_FLASH_ISSI imply SYSRESET imply SYSRESET_GPIO - imply CMD_I2C endif
board/sifive/fu540/fu540.c +1 -1
@@ -58,7 +58,7 @@ static u32 fu540_read_serialnum(void)/* init OTP */ ret =uclass_get_device_by_driver (UCLASS_MISC , -DM_DRIVER_GET (sifive_otp), &dev); +DM_GET_DRIVER (sifive_otp), &dev);if (ret) {debug ("%s: could not find otp device\n" , __func__);
board/sifive/hifive_unmatched_fu740/Kconfig new file +50 -0
50 lines not on this page · raw message
board/sifive/hifive_unmatched_fu740/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +SiFive HiFive Unmatched FU740 BOARD +M: Paul Walmsley <[email protected]> +M: Pragnesh Patel <[email protected]> +M: Green Wan <[email protected]> +S: Maintained +F: board/sifive/hifive_unmatched_fu740/ +F: doc/board/sifive/hifive-unmatched-fu740.rst +F: include/configs/sifive-hifive-unmatched-fu740.h +F: configs/sifive_hifive_unmatched_fu740_defconfig
board/sifive/hifive_unmatched_fu740/Makefile new file +9 -0
@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020 SiFive, Inc + +obj-y += hifive-unmatched-fu740.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +endif
board/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.c new file +24 -0
@@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (c) 2020, SiFive Inc +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#include <common.h> +#include <dm.h> +#include <asm/arch/cache.h> + +int board_init (void ) +{ +int ret; + +/* enable all cache ways */ + ret =cache_enable_ways (); +if (ret) { +debug ("%s: could not enable cache ways\n" , __func__); +return ret; + } +return 0 ; +}
board/sifive/hifive_unmatched_fu740/spl.c new file +85 -0
85 lines not on this page · raw message
configs/sifive_hifive_unmatched_fu740_defconfig new file +57 -0
57 lines not on this page · raw message
doc/board/sifive/fu540.rst +8 -11
@@ -12,7 +12,6 @@ of running Linux. Mainline support ---------------- - The support for following drivers are already enabled: 1. SiFive UART Driver.
@@ -25,7 +24,7 @@ Booting from MMC using FSBL --------------------------- Building -~~~~~~~~ +-------- 1. Add the RISC-V toolchain to your PATH. 2. Setup ARCH & cross compilation environment variable:
@@ -38,7 +37,7 @@ Building 4. make Flashing -~~~~~~~~ +-------- The current U-Boot port is supported in S-mode only and loaded from DRAM.
@@ -64,12 +63,11 @@ copied to the first partition of the sdcard. sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024 Booting -~~~~~~~ - +------- Once you plugin the sdcard and power up, you should see the U-Boot prompt. Sample boot log from HiFive Unleashed board -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +------------------------------------------- .. code-block:: none
@@ -419,7 +417,7 @@ Booting from MMC using U-Boot SPL --------------------------------- Building -~~~~~~~~ +-------- Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be cloned and built for FU540 as below:
@@ -443,7 +441,7 @@ This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) Flashing -~~~~~~~~ +-------- ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type 5B193300-FC78-40CD-8002-E86C45580B47
@@ -473,12 +471,11 @@ Program the SD card sudo dd if=u-boot.itb of=/dev/sda seek=2082 Booting -~~~~~~~ - +------- Once you plugin the sdcard and power up, you should see the U-Boot prompt. Sample boot log from HiFive Unleashed board -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +------------------------------------------- .. code-block:: none
doc/board/sifive/hifive_unmatched_fu740.rst new file +532 -0
532 lines not on this page · raw message
drivers/reset/Kconfig +1 -1
@@ -166,7 +166,7 @@ config RESET_IPQ419 config RESET_SIFIVE bool "Reset Driver for SiFive SoC's" - depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_FU540 + depends on DM_RESET && CLK_SIFIVE_PRCI && (TARGET_SIFIVE_FU540 || TARGET_SIFIVE_HIFIVE_UNMATCHED_FU740) default y help PRCI module within SiFive SoC's provides mechanism to reset
include/configs/sifive-fu540.h +0 -5
@@ -36,11 +36,6 @@#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 -#define RISCV_MMODE_TIMERBASE 0x2000000 -#define RISCV_MMODE_TIMER_FREQ 1000000 - -#define RISCV_SMODE_TIMER_FREQ 1000000 -/* Environment options */ #ifndef CONFIG_SPL_BUILD
include/configs/sifive-hifive-unmatched-fu740.h new file +88 -0
88 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 6/7 board: sifive: add HiFive Unmatched board support
Quoted 10 lines · Green Wan
Add dts, defconfig and board support for HiFive Unmatched.
Signed-off-by Green Wan <[email protected]>--- arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi | 1489 ++++++++++++++++++++ arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi | 40 + arch/riscv/dts/hifive-unmatched-a00.dts | 263 ++++ board/sifive/fu540/Kconfig | 1 - board/sifive/fu540/fu540.c | 2 +-
It looks these fu540 changes are not needed?
Quoted 7 lines
board/sifive/hifive_unmatched_fu740/Kconfig | 50 + board/sifive/hifive_unmatched_fu740/MAINTAINERS | 9 + board/sifive/hifive_unmatched_fu740/Makefile | 9 + .../hifive-unmatched-fu740.c | 24 + board/sifive/hifive_unmatched_fu740/spl.c | 85 ++ configs/sifive_hifive_unmatched_fu740_defconfig | 57 + doc/board/sifive/fu540.rst | 19 +-
here?
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst | 532 +++++++ drivers/reset/Kconfig | 2 +- include/configs/sifive-fu540.h | 5 -
and here?
Quoted 19 lines
include/configs/sifive-hifive-unmatched-fu740.h | 88 ++ 16 files changed, 2656 insertions(+), 19 deletions(-) create mode 100644 arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00.dts create mode 100644 board/sifive/hifive_unmatched_fu740/Kconfig create mode 100644 board/sifive/hifive_unmatched_fu740/MAINTAINERS create mode 100644 board/sifive/hifive_unmatched_fu740/Makefile create mode 100644 board/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.c create mode 100644 board/sifive/hifive_unmatched_fu740/spl.c create mode 100644 configs/sifive_hifive_unmatched_fu740_defconfig create mode 100644 doc/board/sifive/hifive_unmatched_fu740.rst create mode 100644 include/configs/sifive-hifive-unmatched-fu740.harch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi new file +0
-0
[snip]
Quoted 359 lines
arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi new file +40
-0@@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020-2021 SiFive, Inc + */ + +#include "fu740-c000-u-boot.dtsi" +#include "fu740-hifive-unmatched-a00-ddr.dtsi" + +/ { + aliases { + spi0 = &spi0; + }; + + memory at 80000000 { + u-boot,dm-spl; + }; + + hfclk { + u-boot,dm-spl; + }; + + rtcclk { + u-boot,dm-spl; + }; + +}; + +&clint { + clocks = <&rtcclk>; +}; + +&spi0 { + mmc at 0 { + u-boot,dm-spl; + }; +}; + +&gpio { + u-boot,dm-spl; +};arch/riscv/dts/hifive-unmatched-a00.dts new file +99
-0@@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (c) 2019-2021 SiFive, Inc */ + +#include "fu740-c000.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/* Clock frequency (in Hz) of the PCB crystal for rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "SiFive HiFive Unmatched A00"; + compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000", + "sifive,fu740"; + + chosen { + stdout-path = "serial0"; + }; + + cpus { + timebase-frequency = <RTCCLK_FREQ>; + }; + + memory at 80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x4 0x00000000>; + }; + + soc { + }; + + hfclk: hfclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + clock-output-names = "hfclk"; + }; + + rtcclk: rtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <RTCCLK_FREQ>; + clock-output-names = "rtcclk"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + + +&qspi0 { + status = "okay"; + flash at 0 { + compatible = "issi,is25wp256", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&spi0 { + status = "okay"; + mmc at 0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3300 3300>; + disable-wp; + }; +}; + +ð0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy at 0 { + reg = <0>; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&gpio { + status = "okay"; +};board/sifive/fu540/Kconfig +0
-1@@ -47,6 +47,5 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply SPI_FLASH_ISSI imply SYSRESET imply SYSRESET_GPIO - imply CMD_I2C endifboard/sifive/fu540/fu540.c +1
-1@@ -58,7 +58,7 @@ static u32 fu540_read_serialnum(void)/* init OTP */ ret =uclass_get_device_by_driver (UCLASS_MISC , -DM_DRIVER_GET (sifive_otp), &dev); +DM_GET_DRIVER (sifive_otp), &dev);if (ret) {debug ("%s: could not find otp device\n" , __func__);board/sifive/hifive_unmatched_fu740/Kconfig new file +50
-0@@ -0,0 +1,50 @@ +if TARGET_SIFIVE_UNMATCHED + +config SYS_BOARD + default "hifive_unmatched_fu740" + +config SYS_VENDOR + default "sifive" + +config SYS_CPU + default "fu740" + +config SYS_CONFIG_NAME + default "sifive-hifive-unmatched-fu740" + +config SYS_TEXT_BASE + default 0x80200000 if SPL + default 0x80000000 if !RISCV_SMODE + default 0x80200000 if RISCV_SMODE + +config SPL_TEXT_BASE + default 0x08000000 + +config SPL_OPENSBI_LOAD_ADDR + default 0x80000000 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SIFIVE_FU740 + select SUPPORT_SPL + select RESET_SIFIVE + imply CMD_DHCP + imply CMD_EXT2 + imply CMD_EXT4 + imply CMD_FAT + imply CMD_FS_GENERIC + imply CMD_GPT + imply PARTITION_TYPE_GUID + imply CMD_NET + imply CMD_PING + imply CMD_SF + imply DOS_PARTITION + imply EFI_PARTITION + imply IP_DYN + imply ISO_PARTITION + imply PHY_LIB + imply PHY_MSCC + imply SYSRESET + imply SYSRESET_GPIO + +endifboard/sifive/hifive_unmatched_fu740/MAINTAINERS new file +9
-0@@ -0,0 +1,9 @@ +SiFive HiFive Unmatched FU740 BOARD +M: Paul Walmsley <[email protected]> +M: Pragnesh Patel <[email protected]> +M: Green Wan <[email protected]> +S: Maintained +F: board/sifive/hifive_unmatched_fu740/ +F: doc/board/sifive/hifive-unmatched-fu740.rst +F: include/configs/sifive-hifive-unmatched-fu740.h +F: configs/sifive_hifive_unmatched_fu740_defconfigboard/sifive/hifive_unmatched_fu740/Makefile new file +9
-0@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020 SiFive, Inc + +obj-y += hifive-unmatched-fu740.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +endifboard/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.c new file +24
-0@@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (c) 2020, SiFive Inc +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#include <common.h> +#include <dm.h> +#include <asm/arch/cache.h> + +int board_init (void ) +{ +int ret; + +/* enable all cache ways */ + ret =cache_enable_ways (); +if (ret) { +debug ("%s: could not enable cache ways\n" , __func__); +return ret; + } +return 0 ; +}board/sifive/hifive_unmatched_fu740/spl.c new file +61
-0@@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (c) 2020 SiFive, Inc +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#include <init.h> +#include <spl.h> +#include <misc.h> +#include <log.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <asm/gpio.h> +#include <asm/arch/gpio.h> +#include <asm/arch/spl.h> + +#define GEM_PHY_RESET SIFIVE_GENERIC_GPIO_NR(0, 12) + +#define MODE_SELECT_REG 0x1000 +#define MODE_SELECT_SD 0xb +#define MODE_SELECT_MASK GENMASK(3, 0) + +int spl_board_init_f (void ) +{ +int ret; + + ret =spl_soc_init (); +if (ret) { +debug ("HiFive Unmatched FU740 SPL init failed: %d\n" , ret); +return ret; + } + +/* +* GEMGXL init VSC8541 PHY reset sequence; +* leave pull-down active for 2ms +*/ +udelay (2000 ); + ret =gpio_request (GEM_PHY_RESET ,"gem_phy_reset" ); +if (ret) { +debug ("gem_phy_reset gpio request failed: %d\n" , ret); +return ret; + } + +/* Set GPIO 12 (PHY NRESET) */ + ret =gpio_direction_output (GEM_PHY_RESET ,1 ); +if (ret) { +debug ("gem_phy_reset gpio direction set failed: %d\n" , ret); +return ret; + } + +udelay (1 ); + +/* Reset PHY again to enter unmanaged mode */ +gpio_set_value (GEM_PHY_RESET ,0 ); +udelay (1 ); +gpio_set_value (GEM_PHY_RESET ,1 ); +mdelay (15 ); + +return 0 ;
board/sifive/hifive_unmatched_fu740/spl.c line 71
Quoted 10 lines
board/sifive/hifive_unmatched_fu740/spl.c new file +10
-0+} + +u32 spl_boot_device (void ) +{ +u32 mode_select =readl ((void *)MODE_SELECT_REG ); +u32 boot_device = mode_select &MODE_SELECT_MASK ; + +switch (boot_device) { +case MODE_SELECT_SD : +return BOOT_DEVICE_MMC1 ;
No booting from SPI flash support?
Quoted 225 lines
board/sifive/hifive_unmatched_fu740/spl.c new file +14
-0+default : +debug ("Unsupported boot device 0x%x but trying MMC1\n" , + boot_device); +return BOOT_DEVICE_MMC1 ; + } +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match (const char *name) +{ +/* boot using first FIT config */ +return 0 ; +} +#endif configs/sifive_hifive_unmatched_fu740_defconfig new file +57
-0@@ -0,0 +1,57 @@ +CONFIG_RISCV=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x3000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_DM_SPI=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="hifive-unmatched-a00" +CONFIG_TARGET_SIFIVE_UNMATCHED=y +CONFIG_ARCH_RV64I=y +CONFIG_RISCV_SMODE=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_DM_RESET=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_CLK=y +CONFIG_DM_RESET=y +CONFIG_CMD_PCI=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_PNP=y +CONFIG_PCIE_SIFIVE_FU740=y +CONFIG_NVME=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_USB=y +CONFIG_CMD_USB=y +CONFIG_DM_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_CMD_PART=y +CONFIG_CMD_NVME=y +CONFIG_SYS_USB_EVENT_POLL=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_I2C=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_OCORES=y +CONFIG_CLK_SIFIVE_PRCI=y +ONFIG_DM_PWM=y +CONFIG_PWM_SIFIVE=y +CONFIG_CMD_PWM=ydoc/board/sifive/fu540.rst +8
-11@@ -12,7 +12,6 @@ of running Linux. Mainline support ---------------- - The support for following drivers are already enabled: 1. SiFive UART Driver.@@ -25,7 +24,7 @@ Booting from MMC using FSBL --------------------------- Building -~~~~~~~~ +-------- 1. Add the RISC-V toolchain to your PATH. 2. Setup ARCH & cross compilation environment variable:@@ -38,7 +37,7 @@ Building 4. make Flashing -~~~~~~~~ +-------- The current U-Boot port is supported in S-mode only and loaded from DRAM.@@ -64,12 +63,11 @@ copied to the first partition of the sdcard. sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024 Booting -~~~~~~~ - +------- Once you plugin the sdcard and power up, you should see the U-Boot prompt. Sample boot log from HiFive Unleashed board -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +------------------------------------------- .. code-block:: none@@ -419,7 +417,7 @@ Booting from MMC using U-Boot SPL --------------------------------- Building -~~~~~~~~ +-------- Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be cloned and built for FU540 as below:@@ -443,7 +441,7 @@ This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) Flashing -~~~~~~~~ +-------- ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type 5B193300-FC78-40CD-8002-E86C45580B47@@ -473,12 +471,11 @@ Program the SD card sudo dd if=u-boot.itb of=/dev/sda seek=2082 Booting -~~~~~~~ - +------- Once you plugin the sdcard and power up, you should see the U-Boot prompt. Sample boot log from HiFive Unleashed board -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +------------------------------------------- .. code-block:: nonedoc/board/sifive/hifive_unmatched_fu740.rst new file +64
-0@@ -0,0 +1,532 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +HiFive Unmatched +================ + +FU740-C000 RISC-V SoC +--------------------- +The FU740-C000 is a 4+1 64-bit RISC-V core SoC from SiFive. + +The HiFive Unmatched development platform is based on FU740-C000 and capable +of running Linux. + +Mainline support +---------------- +The support for following drivers are already enabled: + +1. SiFive UART Driver. +2. SiFive PRCI Driver for clock. +3. Cadence MACB ethernet driver for networking support. +4. SiFive SPI Driver. +5. MMC SPI Driver for MMC/SD support. + +Booting from MMC using u-boot-spl +--------------------------- + +Building +-------- + +1. Add the RISC-V toolchain to your PATH. +2. Setup ARCH & cross compilation environment variable: + +.. code-block:: none + + export CROSS_COMPILE=<riscv64 toolchain prefix> + +3. make sifive_hifive_unmatched_fu740_defconfig +4. make + +Flashing +-------- + +The current U-Boot port is supported in S-mode only and loaded from DRAM. + +A prior stage M-mode firmware/bootloader (e.g OpenSBI) is required to +boot the u-boot.bin in S-mode and provide M-mode runtime services. + +Currently, the u-boot.bin is used as a payload of the OpenSBI FW_PAYLOAD +firmware. We need to compile OpenSBI with below command: + +.. code-block:: none + + make PLATFORM=generic FW_PAYLOAD_PATH=<path to u-boot-dtb.bin> + +More detailed description of steps required to build FW_PAYLOAD firmware +is beyond the scope of this document. Please refer OpenSBI documenation. +(Note: OpenSBI git repo is at https://github.com/riscv/opensbi.git) + +Once the prior stage firmware/bootloader binary is generated, it should be +copied to the first partition of the sdcard. + +.. code-block:: none + + sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024 +
doc/board/sifive/hifive_unmatched_fu740.rst line 74
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+Booting +------- +Once you plugin the sdcard and power up, you should see the U-Boot prompt. + +Sample boot log from HiFive Unmatched board +------------------------------------------- + +.. code-block:: none + + U-Boot 2019.07-00024-g350ff02f5b (Jul 22 2019 - 11:45:02 +0530)
This seems to be pretty old U-Boot
Quoted 191 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +191
-0+ + CPU: rv64imafdc + Model: SiFive HiFive Unmatched A00 + DRAM: 8 GiB + MMC: spi at 10050000:mmc at 0: 0 + In: serial at 10010000 + Out: serial at 10010000 + Err: serial at 10010000 + Net: eth0: ethernet at 10090000 + Hit any key to stop autoboot: 0 + => version + U-Boot 2019.07-00024-g350ff02f5b (Jul 22 2019 - 11:45:02 +0530) + + riscv64-linux-gcc.br_real (Buildroot 2018.11-rc2-00003-ga0787e9) 8.2.0 + GNU ld (GNU Binutils) 2.31.1 + => mmc info + Device: spi at 10050000:mmc at 0 + Manufacturer ID: 3 + OEM: 5344 + Name: SU08G + Bus Speed: 20000000 + Mode: SD Legacy + Rd Block Len: 512 + SD version 2.0 + High Capacity: Yes + Capacity: 7.4 GiB + Bus Width: 1-bit + Erase Group Size: 512 Bytes + => mmc part + + Partition Map for MMC device 0 -- Partition Type: EFI + + Part Start LBA End LBA Name + Attributes + Type GUID + Partition GUID + 1 0x00000800 0x000107ff "bootloader" + attrs: 0x0000000000000000 + type: 2e54b353-1271-4842-806f-e436d6af6985 + guid: 393bbd36-7111-491c-9869-ce24008f6403 + 2 0x00040800 0x00ecdfde "" + attrs: 0x0000000000000000 + type: 0fc63daf-8483-4772-8e79-3d69d8477de4 + guid: 7fc9a949-5480-48c7-b623-04923080757f + +Now you can configure your networking, tftp server and use tftp boot method to +load uImage. + +.. code-block:: none + + => setenv ipaddr 10.206.7.133 + => setenv netmask 255.255.252.0 + => setenv serverip 10.206.4.143 + => setenv gateway 10.206.4.1 + +If you want to use a flat kernel image such as Image file + +.. code-block:: none + + => tftpboot ${kernel_addr_r} /sifive/fu740/Image + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation complete + ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00) + Using ethernet at 10090000 device + TFTP from server 10.206.4.143; our IP address is 10.206.7.133 + Filename '/sifive/fu740/Image'. + Load address: 0x84000000 + Loading: ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ########################################## + 1.2 MiB/s + done + Bytes transferred = 8867100 (874d1c hex) + +Or if you want to use a compressed kernel image file such as Image.gz + +.. code-block:: none + + => tftpboot ${kernel_addr_r} /sifive/fu740/Image.gz + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation complete + ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00) + Using ethernet at 10090000 device + TFTP from server 10.206.4.143; our IP address is 10.206.7.133 + Filename '/sifive/fu740/Image.gz'. + Load address: 0x84000000 + Loading: ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ########################################## + 1.2 MiB/s + done + Bytes transferred = 4809458 (4962f2 hex) + =>setenv kernel_comp_addr_r 0x90000000 + =>setenv kernel_comp_size 0x500000 + +By this time, correct kernel image is loaded and required environment variables +are set. You can proceed to load the ramdisk and device tree from the tftp server +as well. + +.. code-block:: none + + => tftpboot ${ramdisk_addr_r} /sifive/fu740/uRamdisk + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation complete + ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00) + Using ethernet at 10090000 device + TFTP from server 10.206.4.143; our IP address is 10.206.7.133 + Filename '/sifive/fu740/uRamdisk'. + Load address: 0x88300000 + Loading: ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ############## + 418.9 KiB/s + done + Bytes transferred = 2398272 (249840 hex) + => tftpboot ${fdt_addr_r} /sifive/fu740/hifive-unmatched-a00.dtb + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation complete + ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00) + Using ethernet at 10090000 device + TFTP from server 10.206.4.143; our IP address is 10.206.7.133 + Filename '/sifive/fu740/hifive-unmatched-a00.dtb'. + Load address: 0x88000000 + Loading: ## + 1000 Bytes/s + done + Bytes transferred = 5614 (15ee hex) + => setenv bootargs "root=/dev/ram rw console=ttySIF0 ip=dhcp earlycon=sbi" + => booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r} + ## Loading init Ramdisk from Legacy Image at 88300000 ... + Image Name: Linux RootFS + Image Type: RISC-V Linux RAMDisk Image (uncompressed) + Data Size: 2398208 Bytes = 2.3 MiB + Load Address: 00000000
doc/board/sifive/hifive_unmatched_fu740.rst line 275
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ Entry Point: 00000000 + Verifying Checksum ... OK + ## Flattened Device Tree blob at 88000000 + Booting using the fdt blob at 0x88000000 + Using Device Tree in place at 0000000088000000, end 00000000880045ed + + Starting kernel ... + + [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 + [ 0.000000] Linux version 5.3.0-rc1-00003-g460ac558152f (anup at anup-lab-machine) (gcc version 8.2.0 (Buildroot 2018.11-rc2-00003-ga0787e9)) #6 SMP Mon Jul 22 10:01:01 IST 2019
Looks this is an old kernel used for testing? I doubt it contains the new fu740-prci driver and PCIe support.
Quoted 275 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +257
-0+ [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') + [ 0.000000] printk: bootconsole [sbi0] enabled + [ 0.000000] Initial ramdisk at: 0x(____ptrval____) (2398208 bytes) + [ 0.000000] Zone ranges: + [ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff] + [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] + [ 0.000000] Movable zone start for each node + [ 0.000000] Early memory node ranges + [ 0.000000] node 0: [mem 0x0000000080200000-0x000000027fffffff] + [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff] + [ 0.000000] software IO TLB: mapped [mem 0xfbfff000-0xfffff000] (64MB) + [ 0.000000] CPU with hartid=0 is not available + [ 0.000000] CPU with hartid=0 is not available + [ 0.000000] elf_hwcap is 0x112d + [ 0.000000] percpu: Embedded 18 pages/cpu s34584 r8192 d30952 u73728 + [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2067975 + [ 0.000000] Kernel command line: root=/dev/ram rw console=ttySIF0 ip=dhcp earlycon=sbi + [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) + [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) + [ 0.000000] Sorting __ex_table... + [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off + [ 0.000000] Memory: 8182308K/8386560K available (5916K kernel code, 368K rwdata, 1840K rodata, 213K init, 304K bss, 204252K reserved, 0K cma-reserved) + [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 + [ 0.000000] rcu: Hierarchical RCU implementation. + [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. + [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. + [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 + [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 + [ 0.000000] plic: mapped 53 interrupts with 4 handlers for 9 contexts. + [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1] + [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns + [ 0.000006] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns + [ 0.008559] Console: colour dummy device 80x25 + [ 0.012989] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) + [ 0.023104] pid_max: default: 32768 minimum: 301 + [ 0.028273] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) + [ 0.035765] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) + [ 0.045307] rcu: Hierarchical SRCU implementation. + [ 0.049875] smp: Bringing up secondary CPUs ... + [ 0.055729] smp: Brought up 1 node, 4 CPUs + [ 0.060599] devtmpfs: initialized + [ 0.064819] random: get_random_u32 called from bucket_table_alloc.isra.10+0x4e/0x160 with crng_init=0 + [ 0.073720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns + [ 0.083176] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) + [ 0.090721] NET: Registered protocol family 16 + [ 0.106319] vgaarb: loaded + [ 0.108670] SCSI subsystem initialized + [ 0.112515] usbcore: registered new interface driver usbfs + [ 0.117758] usbcore: registered new interface driver hub + [ 0.123167] usbcore: registered new device driver usb + [ 0.128905] clocksource: Switched to clocksource riscv_clocksource + [ 0.141239] NET: Registered protocol family 2 + [ 0.145506] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) + [ 0.153754] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) + [ 0.163466] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) + [ 0.173468] TCP: Hash tables configured (established 65536 bind 65536) + [ 0.179739] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) + [ 0.186627] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) + [ 0.194117] NET: Registered protocol family 1 + [ 0.198417] RPC: Registered named UNIX socket transport module. + [ 0.203887] RPC: Registered udp transport module. + [ 0.208664] RPC: Registered tcp transport module. + [ 0.213429] RPC: Registered tcp NFSv4.1 backchannel transport module. + [ 0.219944] PCI: CLS 0 bytes, default 64 + [ 0.224170] Unpacking initramfs... + [ 0.262347] Freeing initrd memory: 2336K + [ 0.266531] workingset: timestamp_bits=62 max_order=21 bucket_order=0 + [ 0.280406] NFS: Registering the id_resolver key type + [ 0.284798] Key type id_resolver registered + [ 0.289048] Key type id_legacy registered + [ 0.293114] nfs4filelayout_init: NFSv4 File Layout Driver Registering... + [ 0.300262] NET: Registered protocol family 38 + [ 0.304432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) + [ 0.311862] io scheduler mq-deadline registered + [ 0.316461] io scheduler kyber registered + [ 0.356421] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled + [ 0.363004] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 4, base_baud = 0) is a SiFive UART v0 + [ 0.371468] printk: console [ttySIF0] enabled + [ 0.371468] printk: console [ttySIF0] enabled + [ 0.380223] printk: bootconsole [sbi0] disabled + [ 0.380223] printk: bootconsole [sbi0] disabled + [ 0.389589] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 1, base_baud = 0) is a SiFive UART v0 + [ 0.398680] [drm] radeon kernel modesetting enabled. + [ 0.412395] loop: module loaded + [ 0.415214] sifive_spi 10040000.spi: mapped; irq=3, cs=1 + [ 0.420628] sifive_spi 10050000.spi: mapped; irq=5, cs=1 + [ 0.425897] libphy: Fixed MDIO Bus: probed + [ 0.429964] macb 10090000.ethernet: Registered clk switch 'sifive-gemgxl-mgmt' + [ 0.436743] macb: GEM doesn't support hardware ptp. + [ 0.441621] libphy: MACB_mii_bus: probed + [ 0.601316] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL) + [ 0.615857] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 6 (70:b3:d5:92:f2:f3) + [ 0.625634] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k + [ 0.631381] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. + [ 0.637382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver + [ 0.643799] ehci-pci: EHCI PCI platform driver + [ 0.648261] ehci-platform: EHCI generic platform driver + [ 0.653497] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver + [ 0.659599] ohci-pci: OHCI PCI platform driver + [ 0.664055] ohci-platform: OHCI generic platform driver + [ 0.669448] usbcore: registered new interface driver uas + [ 0.674575] usbcore: registered new interface driver usb-storage + [ 0.680642] mousedev: PS/2 mouse device common for all mice + [ 0.709493] mmc_spi spi1.0: SD/MMC host mmc0, no DMA, no WP, no poweroff, cd polling + [ 0.716615] usbcore: registered new interface driver usbhid + [ 0.722023] usbhid: USB HID core driver + [ 0.726738] NET: Registered protocol family 10 + [ 0.731359] Segment Routing with IPv6 + [ 0.734332] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver + [ 0.740687] NET: Registered protocol family 17 + [ 0.744660] Key type dns_resolver registered + [ 0.806775] mmc0: host does not support reading read-only switch, assuming write-enable + [ 0.814020] mmc0: new SDHC card on SPI + [ 0.820137] mmcblk0: mmc0:0000 SU08G 7.40 GiB + [ 0.850220] mmcblk0: p1 p2 + [ 3.821524] macb 10090000.ethernet eth0: link up (1000/Full) + [ 3.828938] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready + [ 3.848919] Sending DHCP requests .., OK + [ 6.252076] IP-Config: Got DHCP answer from 10.206.4.1, my address is 10.206.7.133 + [ 6.259624] IP-Config: Complete: + [ 6.262831] device=eth0, hwaddr=70:b3:d5:92:f2:f3, ipaddr=10.206.7.133, mask=255.255.252.0, gw=10.206.4.1 + [ 6.272809] host=dhcp-10-206-7-133, domain=sdcorp.global.sandisk.com, nis-domain=(none) + [ 6.281228] bootserver=10.206.126.11, rootserver=10.206.126.11, rootpath= + [ 6.281232] nameserver0=10.86.1.1, nameserver1=10.86.2.1 + [ 6.294179] ntpserver0=10.86.1.1, ntpserver1=10.86.2.1 + [ 6.301026] Freeing unused kernel memory: 212K + [ 6.304683] This architecture does not have kernel memory protection. + [ 6.311121] Run /init as init process + _ _ + | ||_| + | | _ ____ _ _ _ _ + | || | _ \| | | |\ \/ / + | || | | | | |_| |/ \ + |_||_|_| |_|\____|\_/\_/ + + Busybox Rootfs + + Please press Enter to activate this console. + / # + +Booting from MMC using U-Boot SPL +--------------------------------- + +Building +-------- + +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be +cloned and built for FU740 as below: + +.. code-block:: console + + git clone https://github.com/riscv/opensbi.git + cd opensbi + make PLATFORM=generic + export OPENSBI=<path to opensbi/build/platform/generic/firmware/fw_dynamic.bin> + +Now build the U-Boot SPL and U-Boot proper + +.. code-block:: console + + cd <U-Boot-dir> + make sifive_hifive_unmatched_fu740_defconfig + make + +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) + + +Flashing +-------- + +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type +5B193300-FC78-40CD-8002-E86C45580B47 + +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition with GUID +type 2E54B353-1271-4842-806F-E436D6AF6985 + +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, u-boot-nodtb.bin and +device tree blob (hifive-unmatched-a00.dtb) + +Format the SD card (make sure the disk has GPT, otherwise use gdisk to switch) + +.. code-block:: none + + # sudo sgdisk --clear \ + > --set-alignment=2 \ + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \ + > --new=2:2082:10273 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ + > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \ + > /dev/sda + +Program the SD card + +.. code-block:: none + + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 + sudo dd if=u-boot.itb of=/dev/sda seek=2082 + +Booting +------- +Once you plugin the sdcard and power up, you should see the U-Boot prompt. + +Sample boot log from HiFive Unmatched board +------------------------------------------- + +.. code-block:: none + + U-Boot SPL 2021.04-rc3 (Mar 11 2021 - 08:07:46 +0000) + Trying to boot from MMC1 + + + U-Boot 2021.04-rc3 (Mar 11 2021 - 08:07:46 +0000) + + CPU: rv64imafdc + Model: SiFive HiFive Unmatched A00 + DRAM: 16 GiB + MMC: spi at 10050000:mmc at 0: 0 + In: serial at 10010000 + Out: serial at 10010000 + Err: serial at 10010000 + Model: SiFive HiFive Unmatched A00 + Net: + Error: ethernet at 10090000 address not set. + No ethernet found. + + Hit any key to stop autoboot: 0 + => version + U-Boot 2021.04-rc3 (Mar 11 2021 - 08:07:46 +0000) + + riscv64-oe-linux-gcc (GCC) 10.2.0 + GNU ld (GNU Binutils) 2.35.0.20200730 + => mmc part + + Partition Map for MMC device 0 -- Partition Type: EFI + + Part Start LBA End LBA Name + Attributes + Type GUID + Partition GUID + 1 0x00000022 0x00000821 "primary" + attrs: 0x0000000000000000 + type: 5b193300-fc78-40cd-8002-e86c45580b47 + guid: f4b7c671-63ec-4f3b-8f26-3f10407df3c7 + 2 0x00000822 0x00002821 "primary" + attrs: 0x0000000000000000 + type: 2e54b353-1271-4842-806f-e436d6af6985 + guid: e48d9a09-ff68-4219-abb4-62917290de3c + 3 0x00004000 0x00044fff "boot" + attrs: 0x0000000000000004 + type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 + type: data + guid: 6af708a6-0e40-4476-a900-cd59954034f1 + 4 0x00046000 0x03b723de "root" + attrs: 0x0000000000000000 + type: 0fc63daf-8483-4772-8e79-3d69d8477de4 + type: linux + guid: 038165a5-b704-4d96-9bc4-2533803c6620 +drivers/reset/Kconfig +1
-1@@ -166,7 +166,7 @@ config RESET_IPQ419 config RESET_SIFIVE bool "Reset Driver for SiFive SoC's" - depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_FU540 + depends on DM_RESET && CLK_SIFIVE_PRCI && (TARGET_SIFIVE_FU540 || TARGET_SIFIVE_HIFIVE_UNMATCHED_FU740) default y help PRCI module within SiFive SoC's provides mechanism to resetinclude/configs/sifive-fu540.h +0
-0
include/configs/sifive-fu540.h line 43
Quoted 8 lines
include/configs/sifive-fu540.h +0
-5@@ -36,11 +36,6 @@#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 -#define RISCV_MMODE_TIMERBASE 0x2000000 -#define RISCV_MMODE_TIMER_FREQ 1000000 - -#define RISCV_SMODE_TIMER_FREQ 1000000 -
These changes seem not needed?
Quoted 98 lines
include/configs/sifive-fu540.h +0
-0/* Environment options */ #ifndef CONFIG_SPL_BUILD include/configs/sifive-hifive-unmatched-fu740.h new file +88
-1@@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020 SiFive, Inc +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#ifndef __SIFIVE_UNMATCHED_H +#define __SIFIVE_UNMATCHED_H + +#include <linux/sizes.h> + +#ifdef CONFIG_SPL + +#define CONFIG_SPL_MAX_SIZE 0x00100000 +#define CONFIG_SPL_BSS_START_ADDR 0x85000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 + +#define CONFIG_SPL_STACK (0x08000000 + 0x001D0000 - \ + GENERATED_GBL_DATA_SIZE) + +#endif + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) + +#define CONFIG_SYS_MALLOC_LEN SZ_8M + +#define CONFIG_SYS_BOOTM_LEN SZ_64M + +#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 + +#define CONFIG_SYS_PCI_64BIT 1/* enable 64-bit resources */ + +#define CONFIG_SYS_CACHELINE_SIZE 64 + +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 4 + +/* Environment options */ + +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES (func) \ + func(NVME, nvme, 0) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#define TYPE_GUID_LOADER1 "5B193300-FC78-40CD-8002-E86C45580B47" +#define TYPE_GUID_LOADER2 "2E54B353-1271-4842-806F-E436D6AF6985" +#define TYPE_GUID_SYSTEM "0FC63DAF-8483-4772-8E79-3D69D8477DE4" + +#define PARTS_DEFAULT \ + "name=loader1,start=17K,size=1M,type=${type_guid_gpt_loader1};" \ + "name=loader2,size=4MB,type=${type_guid_gpt_loader2};" \ + "name=system,size=-,bootable,type=${type_guid_gpt_system};" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_addr_r=0x84000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "scriptaddr=0x88100000\0" \ + "pxefile_addr_r=0x88200000\0" \ + "ramdisk_addr_r=0x88300000\0" \ + "kernel_comp_addr_r=0x90000000\0" \ + "kernel_comp_size=0x4000000\0" \ + "type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \ + "type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \ + "type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \ + "partitions=" PARTS_DEFAULT "\0" \ + BOOTENV + +#define CONFIG_PREBOOT \ + "setenv fdt_addr ${fdtcontroladdr};" \ + "fdt addr ${fdtcontroladdr};" +#endif /* CONFIG_SPL_BUILD */ + +#endif /* __SIFIVE_UNMATCHED_H */ --
Quoted 2 lines
2.7.4
Regards,
Bin
PATCH 6/7 board: sifive: add HiFive Unmatched board support
Quoted 7 lines · Bin Meng
Quoted 6 lines · Green Wan
Add dts, defconfig and board support for HiFive Unmatched.
Signed-off-by Green Wan <[email protected]>--- arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi | 1489
Quoted 8 lines
++++++++++++++++++++
Quoted 4 lines
arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi | 40 + arch/riscv/dts/hifive-unmatched-a00.dts | 263 ++++ board/sifive/fu540/Kconfig | 1 - board/sifive/fu540/fu540.c | 2 +-It looks these fu540 changes are not needed?
Let me remove the change for fu540 first and check on fu540.
Quoted 9 lines
Quoted 4 lines
board/sifive/hifive_unmatched_fu740/Kconfig | 50 + board/sifive/hifive_unmatched_fu740/MAINTAINERS | 9 + board/sifive/hifive_unmatched_fu740/Makefile | 9 +.../hifive-unmatched-fu740.c | 24 +Quoted 2 lines
board/sifive/hifive_unmatched_fu740/spl.c | 85 ++ configs/sifive_hifive_unmatched_fu740_defconfig | 57 +
I'd like to rename "board/sifive/hifive_unmatched_fu740" to the shorter
name "board/sifive/unmatched". And "configs/sifive_hifive_unmatched_fu740_defconfig" to "configs/sifive_unmatched_defconfig" in v2 patch.
Quoted 418 lines
Quoted 1 line
doc/board/sifive/fu540.rst | 19 +-here?
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst | 532 +++++++ drivers/reset/Kconfig | 2 +- include/configs/sifive-fu540.h | 5 -and here?
Quoted 9 lines
include/configs/sifive-hifive-unmatched-fu740.h | 88 ++ 16 files changed, 2656 insertions(+), 19 deletions(-) create mode 100644 arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00.dts create mode 100644 board/sifive/hifive_unmatched_fu740/Kconfig create mode 100644 board/sifive/hifive_unmatched_fu740/MAINTAINERS create mode 100644 board/sifive/hifive_unmatched_fu740/Makefile create mode 100644
board/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.cReview
Quoted 6 lines
create mode 100644 board/sifive/hifive_unmatched_fu740/spl.c create mode 100644 configs/sifive_hifive_unmatched_fu740_defconfig create mode 100644 doc/board/sifive/hifive_unmatched_fu740.rst create mode 100644 include/configs/sifive-hifive-unmatched-fu740.h(quoted diff) +0
-0
b/arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsiQuoted 4 lines
new file mode 100644
index 0000000..4209491arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi new file +0
-0[snip]
Review
Quoted 1 line
(quoted diff) +0
-0
b/arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsiReview
Quoted 46 lines
new file mode 100644
index 0000000..3dcd2b4arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi new file +40
-0@@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020-2021 SiFive, Inc + */ + +#include "fu740-c000-u-boot.dtsi" +#include "fu740-hifive-unmatched-a00-ddr.dtsi" + +/ { + aliases { + spi0 = &spi0; + }; + + memory at 80000000 { + u-boot,dm-spl; + }; + + hfclk { + u-boot,dm-spl; + }; + + rtcclk { + u-boot,dm-spl; + }; + +}; + +&clint { + clocks = <&rtcclk>; +}; + +&spi0 { + mmc at 0 { + u-boot,dm-spl; + }; +}; + +&gpio { + u-boot,dm-spl; +};(quoted diff) +0
-0
b/arch/riscv/dts/hifive-unmatched-a00.dtsQuoted 121 lines
new file mode 100644
index 0000000..92410b4arch/riscv/dts/hifive-unmatched-a00.dts new file +99
-0@@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (c) 2019-2021 SiFive, Inc */ + +#include "fu740-c000.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/* Clock frequency (in Hz) of the PCB crystal for rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "SiFive HiFive Unmatched A00"; + compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000", + "sifive,fu740"; + + chosen { + stdout-path = "serial0"; + }; + + cpus { + timebase-frequency = <RTCCLK_FREQ>; + }; + + memory at 80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x4 0x00000000>; + }; + + soc { + }; + + hfclk: hfclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + clock-output-names = "hfclk"; + }; + + rtcclk: rtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <RTCCLK_FREQ>; + clock-output-names = "rtcclk"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + + +&qspi0 { + status = "okay"; + flash at 0 { + compatible = "issi,is25wp256", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&spi0 { + status = "okay"; + mmc at 0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3300 3300>; + disable-wp; + }; +}; + +ð0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy at 0 { + reg = <0>; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&gpio { + status = "okay"; +};board/sifive/fu540/Kconfig +0
-1@@ -47,6 +47,5 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply SPI_FLASH_ISSI imply SYSRESET imply SYSRESET_GPIO - imply CMD_I2C endifboard/sifive/fu540/fu540.c +0
-0board/sifive/fu540/fu540.c static u32 fu540_read_serialnum(void) · line 61
Quoted 4 lines
board/sifive/fu540/fu540.c +0
-1@@ -58,7 +58,7 @@ static u32 fu540_read_serialnum(void)/* init OTP */ ret = uclass_get_device_by_driver(UCLASS_MISC, - DM_DRIVER_GET(sifive_otp),&dev);
board/sifive/fu540/fu540.c static u32 fu540_read_serialnum(void) · line 61
Quoted 1 line
board/sifive/fu540/fu540.c +1
-0+ DM_GET_DRIVER(sifive_otp),&dev);
Review
Quoted 4 lines
board/sifive/fu540/fu540.c +0
-0if (ret) {debug ("%s: could not find otp device\n" , __func__);(quoted diff) +0
-0b/board/sifive/hifive_unmatched_fu740/Kconfig
Review
Quoted 56 lines
new file mode 100644
index 0000000..53c87c6board/sifive/hifive_unmatched_fu740/Kconfig new file +50
-0@@ -0,0 +1,50 @@ +if TARGET_SIFIVE_UNMATCHED + +config SYS_BOARD + default "hifive_unmatched_fu740" + +config SYS_VENDOR + default "sifive" + +config SYS_CPU + default "fu740" + +config SYS_CONFIG_NAME + default "sifive-hifive-unmatched-fu740" + +config SYS_TEXT_BASE + default 0x80200000 if SPL + default 0x80000000 if !RISCV_SMODE + default 0x80200000 if RISCV_SMODE + +config SPL_TEXT_BASE + default 0x08000000 + +config SPL_OPENSBI_LOAD_ADDR + default 0x80000000 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SIFIVE_FU740 + select SUPPORT_SPL + select RESET_SIFIVE + imply CMD_DHCP + imply CMD_EXT2 + imply CMD_EXT4 + imply CMD_FAT + imply CMD_FS_GENERIC + imply CMD_GPT + imply PARTITION_TYPE_GUID + imply CMD_NET + imply CMD_PING + imply CMD_SF + imply DOS_PARTITION + imply EFI_PARTITION + imply IP_DYN + imply ISO_PARTITION + imply PHY_LIB + imply PHY_MSCC + imply SYSRESET + imply SYSRESET_GPIO + +endif(quoted diff) +0
-0b/board/sifive/hifive_unmatched_fu740/MAINTAINERS
Review
Quoted 15 lines
new file mode 100644
index 0000000..783b20dboard/sifive/hifive_unmatched_fu740/MAINTAINERS new file +9
-0@@ -0,0 +1,9 @@ +SiFive HiFive Unmatched FU740 BOARD +M: Paul Walmsley <[email protected]> +M: Pragnesh Patel <[email protected]> +M: Green Wan <[email protected]> +S: Maintained +F: board/sifive/hifive_unmatched_fu740/ +F: doc/board/sifive/hifive-unmatched-fu740.rst +F: include/configs/sifive-hifive-unmatched-fu740.h +F: configs/sifive_hifive_unmatched_fu740_defconfig(quoted diff) +0
-0b/board/sifive/hifive_unmatched_fu740/Makefile
Quoted 14 lines
new file mode 100644
index 0000000..aeab025board/sifive/hifive_unmatched_fu740/Makefile new file +9
-0@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020 SiFive, Inc + +obj-y += hifive-unmatched-fu740.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +endifQuoted 1 line
diff --git
a/board/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.cb/board/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.cReview
Quoted 30 lines
new file mode 100644
index 0000000..361bfbfboard/sifive/hifive_unmatched_fu740/hifive-unmatched-fu740.c new file +24
-0@@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (c) 2020, SiFive Inc +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#include <common.h> +#include <dm.h> +#include <asm/arch/cache.h> + +int board_init (void ) +{ +int ret; + +/* enable all cache ways */ + ret =cache_enable_ways (); +if (ret) { +debug ("%s: could not enable cache ways\n" , __func__); +return ret; + } +return 0 ; +}(quoted diff) +0
-0
b/board/sifive/hifive_unmatched_fu740/spl.cQuoted 26 lines
new file mode 100644
index 0000000..d8ee934board/sifive/hifive_unmatched_fu740/spl.c new file +21
-0@@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (c) 2020 SiFive, Inc +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#include <init.h> +#include <spl.h> +#include <misc.h> +#include <log.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <asm/gpio.h> +#include <asm/arch/gpio.h> +#include <asm/arch/spl.h> + +#define GEM_PHY_RESET SIFIVE_GENERIC_GPIO_NR(0, 12) + +#define MODE_SELECT_REG 0x1000board/sifive/hifive_unmatched_fu740/spl.c line 31
Quoted 10 lines
board/sifive/hifive_unmatched_fu740/spl.c new file +10
-0+#define MODE_SELECT_SD 0xb +#define MODE_SELECT_MASK GENMASK(3, 0) + +int spl_board_init_f (void ) +{ +int ret; + + ret =spl_soc_init (); +if (ret) { + debug("HiFive Unmatched FU740 SPL init failed: %d\n",ret);
Quoted 8 lines
board/sifive/hifive_unmatched_fu740/spl.c new file +8
-0+return ret; + } + +/* +* GEMGXL init VSC8541 PHY reset sequence; +* leave pull-down active for 2ms +*/ +udelay (2000 );board/sifive/hifive_unmatched_fu740/spl.c
Quoted 10 lines
board/sifive/hifive_unmatched_fu740/spl.c new file +10
-0+ ret =gpio_request (GEM_PHY_RESET ,"gem_phy_reset" ); +if (ret) { +debug ("gem_phy_reset gpio request failed: %d\n" , ret); +return ret; + } + +/* Set GPIO 12 (PHY NRESET) */ + ret =gpio_direction_output (GEM_PHY_RESET ,1 ); +if (ret) { + debug("gem_phy_reset gpio direction set failed: %d\n",ret);
Quoted 12 lines
board/sifive/hifive_unmatched_fu740/spl.c new file +12
-0+return ret; + } + +udelay (1 ); + +/* Reset PHY again to enter unmanaged mode */ +gpio_set_value (GEM_PHY_RESET ,0 ); +udelay (1 ); +gpio_set_value (GEM_PHY_RESET ,1 ); +mdelay (15 ); + +return 0 ;board/sifive/hifive_unmatched_fu740/spl.c line 71
Quoted 10 lines
board/sifive/hifive_unmatched_fu740/spl.c new file +10
-0+} + +u32 spl_boot_device (void ) +{ +u32 mode_select =readl ((void *)MODE_SELECT_REG ); +u32 boot_device = mode_select &MODE_SELECT_MASK ; + +switch (boot_device) { +case MODE_SELECT_SD : +return BOOT_DEVICE_MMC1 ;No booting from SPI flash support?
Quoted 1 line
We don't boot from SPI flash right now. We want users to boot the whole
chain from SD card to avoid outdated FW on flash.
Quoted 979 lines
Review
Quoted 15 lines
board/sifive/hifive_unmatched_fu740/spl.c new file +14
-0+default : +debug ("Unsupported boot device 0x%x but trying MMC1\n" , + boot_device); +return BOOT_DEVICE_MMC1 ; + } +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match (const char *name) +{ +/* boot using first FIT config */ +return 0 ; +} +#endif (quoted diff) +0
-0b/configs/sifive_hifive_unmatched_fu740_defconfig
Quoted 84 lines
new file mode 100644
index 0000000..5ec1ee6configs/sifive_hifive_unmatched_fu740_defconfig new file +57
-0@@ -0,0 +1,57 @@ +CONFIG_RISCV=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x3000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_DM_SPI=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="hifive-unmatched-a00" +CONFIG_TARGET_SIFIVE_UNMATCHED=y +CONFIG_ARCH_RV64I=y +CONFIG_RISCV_SMODE=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_DM_RESET=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_CLK=y +CONFIG_DM_RESET=y +CONFIG_CMD_PCI=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_PNP=y +CONFIG_PCIE_SIFIVE_FU740=y +CONFIG_NVME=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_USB=y +CONFIG_CMD_USB=y +CONFIG_DM_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_CMD_PART=y +CONFIG_CMD_NVME=y +CONFIG_SYS_USB_EVENT_POLL=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_I2C=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_OCORES=y +CONFIG_CLK_SIFIVE_PRCI=y +ONFIG_DM_PWM=y +CONFIG_PWM_SIFIVE=y +CONFIG_CMD_PWM=ydoc/board/sifive/fu540.rst +1
-2@@ -12,7 +12,6 @@ of running Linux. Mainline support ---------------- - The support for following drivers are already enabled: 1. SiFive UART Driver.@@ -25,7 +24,7 @@ Booting from MMC using FSBL --------------------------- Building -~~~~~~~~ +-------- 1. Add the RISC-V toolchain to your PATH. 2. Setup ARCH & cross compilation environment variable:doc/board/sifive/fu540.rst Building · line 42
Quoted 7 lines
doc/board/sifive/fu540.rst +1
-1@@ -38,7 +37,7 @@ Building 4. make Flashing -~~~~~~~~ +-------- The current U-Boot port is supported in S-mode only and loaded fromDRAM.
doc/board/sifive/fu540.rst copied to the first partition of the sdcard. · line 67
Quoted 9 lines
doc/board/sifive/fu540.rst +1
-2@@ -64,12 +63,11 @@ copied to the first partition of the sdcard. sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024 Booting -~~~~~~~ - +------- Once you plugin the sdcard and power up, you should see the U-Bootprompt.
doc/board/sifive/fu540.rst This will generate spl/u-boot-spl.bin and FIT image
Quoted 17 lines
doc/board/sifive/fu540.rst +2
-2Sample boot log from HiFive Unleashed board -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +------------------------------------------- .. code-block:: none@@ -419,7 +417,7 @@ Booting from MMC using U-Boot SPL --------------------------------- Building -~~~~~~~~ +-------- Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be cloned and built for FU540 as below:@@ -443,7 +441,7 @@ This will generate spl/u-boot-spl.bin and FIT image(u-boot.itb)
doc/board/sifive/fu540.rst Building
Quoted 7 lines
doc/board/sifive/fu540.rst +1
-1Flashing -~~~~~~~~ +-------- ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUIDtype
doc/board/sifive/fu540.rst Program the SD card · line 475
Quoted 9 lines
doc/board/sifive/fu540.rst +1
-25B193300-FC78-40CD-8002-E86C45580B47@@ -473,12 +471,11 @@ Program the SD card sudo dd if=u-boot.itb of=/dev/sda seek=2082 Booting -~~~~~~~ - +------- Once you plugin the sdcard and power up, you should see the U-Bootprompt.
Review
Quoted 8 lines
doc/board/sifive/fu540.rst +1
-1Sample boot log from HiFive Unleashed board -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +------------------------------------------- .. code-block:: none(quoted diff) +0
-0
b/doc/board/sifive/hifive_unmatched_fu740.rstQuoted 5 lines
new file mode 100644
index 0000000..6670df5doc/board/sifive/hifive_unmatched_fu740.rst line 10
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0@@ -0,0 +1,532 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +HiFive Unmatched +================ + +FU740-C000 RISC-V SoC +--------------------- +The FU740-C000 is a 4+1 64-bit RISC-V core SoC from SiFive. + +The HiFive Unmatched development platform is based on FU740-C000 andcapable
Quoted 22 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +22
-0+of running Linux. + +Mainline support +---------------- +The support for following drivers are already enabled: + +1. SiFive UART Driver. +2. SiFive PRCI Driver for clock. +3. Cadence MACB ethernet driver for networking support. +4. SiFive SPI Driver. +5. MMC SPI Driver for MMC/SD support. + +Booting from MMC using u-boot-spl +--------------------------- + +Building +-------- + +1. Add the RISC-V toolchain to your PATH. +2. Setup ARCH & cross compilation environment variable: + +.. code-block:: nonedoc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ + export CROSS_COMPILE=<riscv64 toolchain prefix> + +3. make sifive_hifive_unmatched_fu740_defconfig +4. make + +Flashing +-------- + +The current U-Boot port is supported in S-mode only and loaded fromDRAM.
Quoted 6 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +6
-0+ +A prior stage M-mode firmware/bootloader (e.g OpenSBI) is required to +boot the u-boot.bin in S-mode and provide M-mode runtime services. + +Currently, the u-boot.bin is used as a payload of the OpenSBI FW_PAYLOAD +firmware. We need to compile OpenSBI with below command:doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ +.. code-block:: none + + make PLATFORM=generic FW_PAYLOAD_PATH=<path to u-boot-dtb.bin> + +More detailed description of steps required to build FW_PAYLOAD firmware +is beyond the scope of this document. Please refer OpenSBI documenation. +(Note: OpenSBI git repo is at https://github.com/riscv/opensbi.git) + +Once the prior stage firmware/bootloader binary is generated, it shouldbe
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 9 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +9
-0+copied to the first partition of the sdcard. + +.. code-block:: none + + sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024 + +Booting +------- +Once you plugin the sdcard and power up, you should see the U-Bootprompt.
doc/board/sifive/hifive_unmatched_fu740.rst line 74
Quoted 7 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +7
-0+ +Sample boot log from HiFive Unmatched board +------------------------------------------- + +.. code-block:: none + + U-Boot 2019.07-00024-g350ff02f5b (Jul 22 2019 - 11:45:02 +0530)This seems to be pretty old U-Boot
will fix outdated content.
Quoted 4 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +4
-0+ + CPU: rv64imafdc + Model: SiFive HiFive Unmatched A00 + DRAM: 8 GiBdoc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ MMC: spi at 10050000:mmc at 0: 0 + In: serial at 10010000 + Out: serial at 10010000 + Err: serial at 10010000 + Net: eth0: ethernet at 10090000 + Hit any key to stop autoboot: 0 + => version + U-Boot 2019.07-00024-g350ff02f5b (Jul 22 2019 - 11:45:02 +0530) + + riscv64-linux-gcc.br_real (Buildroot 2018.11-rc2-00003-ga0787e9)8.2.0
Quoted 22 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +22
-0+ GNU ld (GNU Binutils) 2.31.1 + => mmc info + Device: spi at 10050000:mmc at 0 + Manufacturer ID: 3 + OEM: 5344 + Name: SU08G + Bus Speed: 20000000 + Mode: SD Legacy + Rd Block Len: 512 + SD version 2.0 + High Capacity: Yes + Capacity: 7.4 GiB + Bus Width: 1-bit + Erase Group Size: 512 Bytes + => mmc part + + Partition Map for MMC device 0 -- Partition Type: EFI + + Part Start LBA End LBA Name + Attributes + Type GUID + Partition GUIDdoc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ 1 0x00000800 0x000107ff "bootloader" + attrs: 0x0000000000000000 + type: 2e54b353-1271-4842-806f-e436d6af6985 + guid: 393bbd36-7111-491c-9869-ce24008f6403 + 2 0x00040800 0x00ecdfde "" + attrs: 0x0000000000000000 + type: 0fc63daf-8483-4772-8e79-3d69d8477de4 + guid: 7fc9a949-5480-48c7-b623-04923080757f + +Now you can configure your networking, tftp server and use tftp bootmethod to
Quoted 13 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +13
-0+load uImage. + +.. code-block:: none + + => setenv ipaddr 10.206.7.133 + => setenv netmask 255.255.252.0 + => setenv serverip 10.206.4.143 + => setenv gateway 10.206.4.1 + +If you want to use a flat kernel image such as Image file + +.. code-block:: none +doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ => tftpboot ${kernel_addr_r} /sifive/fu740/Image + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation complete + ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00) + Using ethernet at 10090000 device + TFTP from server 10.206.4.143; our IP address is 10.206.7.133 + Filename '/sifive/fu740/Image'. + Load address: 0x84000000 + Loading:#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 144
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 145
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 146
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 147
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 148
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 149
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 150
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 151
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 152
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 153
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 154
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 155
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 156
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 157
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 158
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 159
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 160
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 161
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 162
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 163
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 164
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 165
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 166
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 167
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 168
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
Quoted 9 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +9
-0+ ########################################## + 1.2 MiB/s + done + Bytes transferred = 8867100 (874d1c hex) + +Or if you want to use a compressed kernel image file such as Image.gz + +.. code-block:: none +doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ => tftpboot ${kernel_addr_r} /sifive/fu740/Image.gz + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation complete + ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00) + Using ethernet at 10090000 device + TFTP from server 10.206.4.143; our IP address is 10.206.7.133 + Filename '/sifive/fu740/Image.gz'. + Load address: 0x84000000 + Loading:#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 188
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 189
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 190
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 191
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 192
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 193
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 194
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 195
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 196
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 197
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 198
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 199
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 200
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 201
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 202
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 203
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 204
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 205
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 206
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 207
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 208
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 209
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 210
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 211
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 212
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 8 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +8
-0+ ########################################## + 1.2 MiB/s + done + Bytes transferred = 4809458 (4962f2 hex) + =>setenv kernel_comp_addr_r 0x90000000 + =>setenv kernel_comp_size 0x500000 + +By this time, correct kernel image is loaded and required environmentvariables
doc/board/sifive/hifive_unmatched_fu740.rst line 221
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+are set. You can proceed to load the ramdisk and device tree from thetftp server
Quoted 4 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +4
-0+as well. + +.. code-block:: none +doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ => tftpboot ${ramdisk_addr_r} /sifive/fu740/uRamdisk + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation complete + ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00) + Using ethernet at 10090000 device + TFTP from server 10.206.4.143; our IP address is 10.206.7.133 + Filename '/sifive/fu740/uRamdisk'. + Load address: 0x88300000 + Loading:#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 236
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 237
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 238
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 239
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 240
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
doc/board/sifive/hifive_unmatched_fu740.rst line 241
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+#################################################################
Quoted 8 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +8
-0+ ############## + 418.9 KiB/s + done + Bytes transferred = 2398272 (249840 hex) + => tftpboot ${fdt_addr_r} /sifive/fu740/hifive-unmatched-a00.dtb + ethernet at 10090000: PHY present at 0 + ethernet at 10090000: Starting autonegotiation... + ethernet at 10090000: Autonegotiation completedoc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00) + Using ethernet at 10090000 device + TFTP from server 10.206.4.143; our IP address is 10.206.7.133 + Filename '/sifive/fu740/hifive-unmatched-a00.dtb'. + Load address: 0x88000000 + Loading: ## + 1000 Bytes/s + done + Bytes transferred = 5614 (15ee hex) + => setenv bootargs "root=/dev/ram rw console=ttySIF0 ip=dhcpearlycon=sbi"
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 11 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +11
-0+ => booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r} + ## Loading init Ramdisk from Legacy Image at 88300000 ... + Image Name: Linux RootFS + Image Type: RISC-V Linux RAMDisk Image (uncompressed) + Data Size: 2398208 Bytes = 2.3 MiB + Load Address: 00000000 + Entry Point: 00000000 + Verifying Checksum ... OK + ## Flattened Device Tree blob at 88000000 + Booting using the fdt blob at 0x88000000 + Using Device Tree in place at 0000000088000000, end
00000000880045eddoc/board/sifive/hifive_unmatched_fu740.rst
Quoted 5 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +5
-0+ + Starting kernel ... + + [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 + [ 0.000000] Linux version 5.3.0-rc1-00003-g460ac558152f(anup at anup-lab-machine) (gcc version 8.2.0 (Buildroot 2018.11-rc2-00003-ga0787e9)) #6 SMP Mon Jul 22 10:01:01 IST 2019
Looks this is an old kernel used for testing? I doubt it contains the new fu740-prci driver and PCIe support.
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 9 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +9
-0+ [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') + [ 0.000000] printk: bootconsole [sbi0] enabled + [ 0.000000] Initial ramdisk at: 0x(____ptrval____) (2398208 bytes) + [ 0.000000] Zone ranges: + [ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff] + [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] + [ 0.000000] Movable zone start for each node + [ 0.000000] Early memory node ranges + [ 0.000000] node 0: [mem0x0000000080200000-0x000000027fffffff]
doc/board/sifive/hifive_unmatched_fu740.rst line 285
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] Initmem setup node 0 [mem0x0000000080200000-0x000000027fffffff]
doc/board/sifive/hifive_unmatched_fu740.rst line 286
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] software IO TLB: mapped [mem 0xfbfff000-0xfffff000](64MB)
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 4 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +4
-0+ [ 0.000000] CPU with hartid=0 is not available + [ 0.000000] CPU with hartid=0 is not available + [ 0.000000] elf_hwcap is 0x112d + [ 0.000000] percpu: Embedded 18 pages/cpu s34584 r8192 d30952u73728
doc/board/sifive/hifive_unmatched_fu740.rst line 291
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] Built 1 zonelists, mobility grouping on. Totalpages: 2067975
doc/board/sifive/hifive_unmatched_fu740.rst line 292
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] Kernel command line: root=/dev/ram rw console=ttySIF0ip=dhcp earlycon=sbi
doc/board/sifive/hifive_unmatched_fu740.rst line 293
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11,8388608 bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst line 294
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] Inode-cache hash table entries: 524288 (order: 10,4194304 bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst line 296
Quoted 2 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +2
-0+ [ 0.000000] Sorting __ex_table... + [ 0.000000] mem auto-init: stack:off, heap alloc:off, heapfree:off
doc/board/sifive/hifive_unmatched_fu740.rst line 297
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] Memory: 8182308K/8386560K available (5916K kernelcode, 368K rwdata, 1840K rodata, 213K init, 304K bss, 204252K reserved, 0K cma-reserved)
doc/board/sifive/hifive_unmatched_fu740.rst line 298
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4,Nodes=1
doc/board/sifive/hifive_unmatched_fu740.rst line 300
Quoted 2 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +2
-0+ [ 0.000000] rcu: Hierarchical RCU implementation. + [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 tonr_cpu_ids=4.
doc/board/sifive/hifive_unmatched_fu740.rst line 301
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] rcu: RCU calculated value of scheduler-enlistmentdelay is 25 jiffies.
doc/board/sifive/hifive_unmatched_fu740.rst line 302
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16,nr_cpu_ids=4
doc/board/sifive/hifive_unmatched_fu740.rst line 304
Quoted 2 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +2
-0+ [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 + [ 0.000000] plic: mapped 53 interrupts with 4 handlers for 9contexts.
doc/board/sifive/hifive_unmatched_fu740.rst line 305
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid[0] hartid [1]
doc/board/sifive/hifive_unmatched_fu740.rst line 306
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000000] clocksource: riscv_clocksource: mask:
0xffffffffffffffffmax_cycles:0x1d854df40,max_idle_ns: 3526361616960 nsdoc/board/sifive/hifive_unmatched_fu740.rst line 307
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.000006] sched_clock: 64 bits at 1000kHz, resolution 1000ns,wraps every 2199023255500ns
doc/board/sifive/hifive_unmatched_fu740.rst line 309
Quoted 2 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +2
-0+ [ 0.008559] Console: colour dummy device 80x25 + [ 0.012989] Calibrating delay loop (skipped), value calculatedusing timer frequency.. 2.00 BogoMIPS (lpj=4000)
doc/board/sifive/hifive_unmatched_fu740.rst line 311
Quoted 2 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +2
-0+ [ 0.023104] pid_max: default: 32768 minimum: 301 + [ 0.028273] Mount-cache hash table entries: 16384 (order: 5,131072 bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst line 312
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.035765] Mountpoint-cache hash table entries: 16384 (order: 5,131072 bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 5 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +5
-0+ [ 0.045307] rcu: Hierarchical SRCU implementation. + [ 0.049875] smp: Bringing up secondary CPUs ... + [ 0.055729] smp: Brought up 1 node, 4 CPUs + [ 0.060599] devtmpfs: initialized + [ 0.064819] random: get_random_u32 called frombucket_table_alloc.isra.10+0x4e/0x160 with crng_init=0
doc/board/sifive/hifive_unmatched_fu740.rst line 318
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.073720] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff,max_idle_ns: 7645041785100000 nsdoc/board/sifive/hifive_unmatched_fu740.rst line 319
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.083176] futex hash table entries: 1024 (order: 4, 65536bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 9 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +9
-0+ [ 0.090721] NET: Registered protocol family 16 + [ 0.106319] vgaarb: loaded + [ 0.108670] SCSI subsystem initialized + [ 0.112515] usbcore: registered new interface driver usbfs + [ 0.117758] usbcore: registered new interface driver hub + [ 0.123167] usbcore: registered new device driver usb + [ 0.128905] clocksource: Switched to clocksource riscv_clocksource + [ 0.141239] NET: Registered protocol family 2 + [ 0.145506] tcp_listen_portaddr_hash hash table entries: 4096(order: 4, 65536 bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst line 329
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.153754] TCP established hash table entries: 65536 (order: 7,524288 bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst line 330
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.163466] TCP bind hash table entries: 65536 (order: 8, 1048576bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst line 331
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.173468] TCP: Hash tables configured (established 65536 bind65536)
doc/board/sifive/hifive_unmatched_fu740.rst line 332
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.179739] UDP hash table entries: 4096 (order: 5, 131072 bytes,linear)
doc/board/sifive/hifive_unmatched_fu740.rst line 333
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.186627] UDP-Lite hash table entries: 4096 (order: 5, 131072bytes, linear)
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 5 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +5
-0+ [ 0.194117] NET: Registered protocol family 1 + [ 0.198417] RPC: Registered named UNIX socket transport module. + [ 0.203887] RPC: Registered udp transport module. + [ 0.208664] RPC: Registered tcp transport module. + [ 0.213429] RPC: Registered tcp NFSv4.1 backchannel transportmodule.
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 4 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +4
-0+ [ 0.219944] PCI: CLS 0 bytes, default 64 + [ 0.224170] Unpacking initramfs... + [ 0.262347] Freeing initrd memory: 2336K + [ 0.266531] workingset: timestamp_bits=62 max_order=21bucket_order=0
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 4 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +4
-0+ [ 0.280406] NFS: Registering the id_resolver key type + [ 0.284798] Key type id_resolver registered + [ 0.289048] Key type id_legacy registered + [ 0.293114] nfs4filelayout_init: NFSv4 File Layout DriverRegistering...
doc/board/sifive/hifive_unmatched_fu740.rst line 348
Quoted 2 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +2
-0+ [ 0.300262] NET: Registered protocol family 38 + [ 0.304432] Block layer SCSI generic (bsg) driver version 0.4loaded (major 254)
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +3
-0+ [ 0.311862] io scheduler mq-deadline registered + [ 0.316461] io scheduler kyber registered + [ 0.356421] Serial: 8250/16550 driver, 4 ports, IRQ sharingdisabled
doc/board/sifive/hifive_unmatched_fu740.rst line 352
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.363004] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 4,
base_baud= 0) is a SiFive UART v0doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 5 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +5
-0+ [ 0.371468] printk: console [ttySIF0] enabled + [ 0.371468] printk: console [ttySIF0] enabled + [ 0.380223] printk: bootconsole [sbi0] disabled + [ 0.380223] printk: bootconsole [sbi0] disabled + [ 0.389589] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 1,
base_baud= 0) is a SiFive UART v0doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 6 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +6
-0+ [ 0.398680] [drm] radeon kernel modesetting enabled. + [ 0.412395] loop: module loaded + [ 0.415214] sifive_spi 10040000.spi: mapped; irq=3, cs=1 + [ 0.420628] sifive_spi 10050000.spi: mapped; irq=5, cs=1 + [ 0.425897] libphy: Fixed MDIO Bus: probed + [ 0.429964] macb 10090000.ethernet: Registered clk switch'sifive-gemgxl-mgmt'
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +3
-0+ [ 0.436743] macb: GEM doesn't support hardware ptp. + [ 0.441621] libphy: MACB_mii_bus: probed + [ 0.601316] Microsemi VSC8541 SyncE10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL)
doc/board/sifive/hifive_unmatched_fu740.rst line 367
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 0.615857] macb 10090000.ethernet eth0: Cadence GEM rev
0x10070109at0x10090000irq 6 (70:b3:d5:92:f2:f3)doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +3
-0+ [ 0.625634] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k + [ 0.631381] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. + [ 0.637382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)Driver
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 9 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +9
-0+ [ 0.643799] ehci-pci: EHCI PCI platform driver + [ 0.648261] ehci-platform: EHCI generic platform driver + [ 0.653497] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver + [ 0.659599] ohci-pci: OHCI PCI platform driver + [ 0.664055] ohci-platform: OHCI generic platform driver + [ 0.669448] usbcore: registered new interface driver uas + [ 0.674575] usbcore: registered new interface driver usb-storage + [ 0.680642] mousedev: PS/2 mouse device common for all mice + [ 0.709493] mmc_spi spi1.0: SD/MMC host mmc0, no DMA, no WP, nopoweroff, cd polling
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 8 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +8
-0+ [ 0.716615] usbcore: registered new interface driver usbhid + [ 0.722023] usbhid: USB HID core driver + [ 0.726738] NET: Registered protocol family 10 + [ 0.731359] Segment Routing with IPv6 + [ 0.734332] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver + [ 0.740687] NET: Registered protocol family 17 + [ 0.744660] Key type dns_resolver registered + [ 0.806775] mmc0: host does not support reading read-only switch,assuming write-enable
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 5 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +5
-0+ [ 0.814020] mmc0: new SDHC card on SPI + [ 0.820137] mmcblk0: mmc0:0000 SU08G 7.40 GiB + [ 0.850220] mmcblk0: p1 p2 + [ 3.821524] macb 10090000.ethernet eth0: link up (1000/Full) + [ 3.828938] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomesready
doc/board/sifive/hifive_unmatched_fu740.rst line 394
Quoted 2 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +2
-0+ [ 3.848919] Sending DHCP requests .., OK + [ 6.252076] IP-Config: Got DHCP answer from 10.206.4.1, myaddress is 10.206.7.133
doc/board/sifive/hifive_unmatched_fu740.rst line 396
Quoted 2 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +2
-0+ [ 6.259624] IP-Config: Complete: + [ 6.262831] device=eth0, hwaddr=70:b3:d5:92:f2:f3,ipaddr=10.206.7.133, mask=255.255.252.0, gw=10.206.4.1
doc/board/sifive/hifive_unmatched_fu740.rst line 397
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 6.272809] host=dhcp-10-206-7-133, domain=sdcorp.global.sandisk.com, nis-domain=(none)
doc/board/sifive/hifive_unmatched_fu740.rst line 398
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ [ 6.281228] bootserver=10.206.126.11,rootserver=10.206.126.11, rootpath=
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 4 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +4
-0+ [ 6.281232] nameserver0=10.86.1.1, nameserver1=10.86.2.1 + [ 6.294179] ntpserver0=10.86.1.1, ntpserver1=10.86.2.1 + [ 6.301026] Freeing unused kernel memory: 212K + [ 6.304683] This architecture does not have kernel memoryprotection.
Quoted 18 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +18
-0+ [ 6.311121] Run /init as init process + _ _ + | ||_| + | | _ ____ _ _ _ _ + | || | _ \| | | |\ \/ / + | || | | | | |_| |/ \ + |_||_|_| |_|\____|\_/\_/ + + Busybox Rootfs + + Please press Enter to activate this console. + / # + +Booting from MMC using U-Boot SPL +--------------------------------- + +Building +--------doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be +cloned and built for FU740 as below: + +.. code-block:: console + + git clone https://github.com/riscv/opensbi.git + cd opensbi + make PLATFORM=generic + export OPENSBI=<path toopensbi/build/platform/generic/firmware/fw_dynamic.bin>
Quoted 6 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +6
-0+ +Now build the U-Boot SPL and U-Boot proper + +.. code-block:: console + + cd <U-Boot-dir>doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 10 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +10
-0+ make sifive_hifive_unmatched_fu740_defconfig + make + +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) + + +Flashing +-------- + +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUIDtype
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +3
-0+5B193300-FC78-40CD-8002-E86C45580B47 + +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partitionwith GUID
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +3
-0+type 2E54B353-1271-4842-806F-E436D6AF6985 + +FIT image (u-boot.itb) is a combination of fw_dynamic.bin,u-boot-nodtb.bin and
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +3
-0+device tree blob (hifive-unmatched-a00.dtb) + +Format the SD card (make sure the disk has GPT, otherwise use gdisk toswitch)
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 6 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +6
-0+ +.. code-block:: none + + # sudo sgdisk --clear \ + > --set-alignment=2 \ + > --new=1:34:2081 --change-name=1:loader1--typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \
doc/board/sifive/hifive_unmatched_fu740.rst line 462
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ > --new=2:2082:10273 --change-name=2:loader2--typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \
doc/board/sifive/hifive_unmatched_fu740.rst line 463
Quoted 1 line
doc/board/sifive/hifive_unmatched_fu740.rst new file +1
-0+ > --new=3:10274: --change-name=3:rootfs--typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \
doc/board/sifive/hifive_unmatched_fu740.rst
Quoted 12 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +12
-0+ > /dev/sda + +Program the SD card + +.. code-block:: none + + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 + sudo dd if=u-boot.itb of=/dev/sda seek=2082 + +Booting +------- +Once you plugin the sdcard and power up, you should see the U-Bootprompt.
Quoted 62 lines
doc/board/sifive/hifive_unmatched_fu740.rst new file +57
-0+ +Sample boot log from HiFive Unmatched board +------------------------------------------- + +.. code-block:: none + + U-Boot SPL 2021.04-rc3 (Mar 11 2021 - 08:07:46 +0000) + Trying to boot from MMC1 + + + U-Boot 2021.04-rc3 (Mar 11 2021 - 08:07:46 +0000) + + CPU: rv64imafdc + Model: SiFive HiFive Unmatched A00 + DRAM: 16 GiB + MMC: spi at 10050000:mmc at 0: 0 + In: serial at 10010000 + Out: serial at 10010000 + Err: serial at 10010000 + Model: SiFive HiFive Unmatched A00 + Net: + Error: ethernet at 10090000 address not set. + No ethernet found. + + Hit any key to stop autoboot: 0 + => version + U-Boot 2021.04-rc3 (Mar 11 2021 - 08:07:46 +0000) + + riscv64-oe-linux-gcc (GCC) 10.2.0 + GNU ld (GNU Binutils) 2.35.0.20200730 + => mmc part + + Partition Map for MMC device 0 -- Partition Type: EFI + + Part Start LBA End LBA Name + Attributes + Type GUID + Partition GUID + 1 0x00000022 0x00000821 "primary" + attrs: 0x0000000000000000 + type: 5b193300-fc78-40cd-8002-e86c45580b47 + guid: f4b7c671-63ec-4f3b-8f26-3f10407df3c7 + 2 0x00000822 0x00002821 "primary" + attrs: 0x0000000000000000 + type: 2e54b353-1271-4842-806f-e436d6af6985 + guid: e48d9a09-ff68-4219-abb4-62917290de3c + 3 0x00004000 0x00044fff "boot" + attrs: 0x0000000000000004 + type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 + type: data + guid: 6af708a6-0e40-4476-a900-cd59954034f1 + 4 0x00046000 0x03b723de "root" + attrs: 0x0000000000000000 + type: 0fc63daf-8483-4772-8e79-3d69d8477de4 + type: linux + guid: 038165a5-b704-4d96-9bc4-2533803c6620 +drivers/reset/Kconfig +0
-0drivers/reset/Kconfig config RESET_IPQ419 · line 169
Quoted 4 lines
drivers/reset/Kconfig +0
-1@@ -166,7 +166,7 @@ config RESET_IPQ419 config RESET_SIFIVE bool "Reset Driver for SiFive SoC's" - depends on DM_RESET && CLK_SIFIVE_FU540_PRCI &&
TARGET_SIFIVE_FU540drivers/reset/Kconfig config RESET_IPQ419 · line 169
Quoted 1 line
drivers/reset/Kconfig +1
-0+ depends on DM_RESET && CLK_SIFIVE_PRCI && (TARGET_SIFIVE_FU540|| TARGET_SIFIVE_HIFIVE_UNMATCHED_FU740) > default y > help > PRCI module within SiFive SoC's provides mechanism to resetReview
Quoted 1 line
(quoted diff) +0
-0
b/include/configs/sifive-fu540.hinclude/configs/sifive-fu540.h line 43
Quoted 12 lines
index 0d69d1c..c1c79db 100644
include/configs/sifive-fu540.h +0
-5@@ -36,11 +36,6 @@#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 -#define RISCV_MMODE_TIMERBASE 0x2000000 -#define RISCV_MMODE_TIMER_FREQ 1000000 - -#define RISCV_SMODE_TIMER_FREQ 1000000 -These changes seem not needed?
Review
Quoted 4 lines
include/configs/sifive-fu540.h +0
-0/* Environment options */ #ifndef CONFIG_SPL_BUILD (quoted diff) +0
-0
b/include/configs/sifive-hifive-unmatched-fu740.hQuoted 24 lines
new file mode 100644
index 0000000..b59df9cinclude/configs/sifive-hifive-unmatched-fu740.h new file +19
-0@@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020 SiFive, Inc +* +* Authors: +* Pragnesh Patel <[email protected]> +*/ + +#ifndef __SIFIVE_UNMATCHED_H +#define __SIFIVE_UNMATCHED_H + +#include <linux/sizes.h> + +#ifdef CONFIG_SPL + +#define CONFIG_SPL_MAX_SIZE 0x00100000 +#define CONFIG_SPL_BSS_START_ADDR 0x85000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \include/configs/sifive-hifive-unmatched-fu740.h line 29
Quoted 10 lines
include/configs/sifive-hifive-unmatched-fu740.h new file +10
-0+ CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 + +#define CONFIG_SPL_STACK (0x08000000 + 0x001D0000 - \ + GENERATED_GBL_DATA_SIZE) + +#endif + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE +
SZ_2M)include/configs/sifive-hifive-unmatched-fu740.h
Quoted 10 lines
include/configs/sifive-hifive-unmatched-fu740.h new file +10
-0+ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) + +#define CONFIG_SYS_MALLOC_LEN SZ_8M + +#define CONFIG_SYS_BOOTM_LEN SZ_64M + +#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 + +#define CONFIG_SYS_PCI_64BIT 1/* enable 64-bit resources */
Quoted 50 lines
include/configs/sifive-hifive-unmatched-fu740.h new file +49
-1+ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 4 + +/* Environment options */ + +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES (func) \ + func(NVME, nvme, 0) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#define TYPE_GUID_LOADER1 "5B193300-FC78-40CD-8002-E86C45580B47" +#define TYPE_GUID_LOADER2 "2E54B353-1271-4842-806F-E436D6AF6985" +#define TYPE_GUID_SYSTEM "0FC63DAF-8483-4772-8E79-3D69D8477DE4" + +#define PARTS_DEFAULT \ + "name=loader1,start=17K,size=1M,type=${type_guid_gpt_loader1};" \ + "name=loader2,size=4MB,type=${type_guid_gpt_loader2};" \ + "name=system,size=-,bootable,type=${type_guid_gpt_system};" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_addr_r=0x84000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "scriptaddr=0x88100000\0" \ + "pxefile_addr_r=0x88200000\0" \ + "ramdisk_addr_r=0x88300000\0" \ + "kernel_comp_addr_r=0x90000000\0" \ + "kernel_comp_size=0x4000000\0" \ + "type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \ + "type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \ + "type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \ + "partitions=" PARTS_DEFAULT "\0" \ + BOOTENV + +#define CONFIG_PREBOOT \ + "setenv fdt_addr ${fdtcontroladdr};" \ + "fdt addr ${fdtcontroladdr};" +#endif /* CONFIG_SPL_BUILD */ + +#endif /* __SIFIVE_UNMATCHED_H */ --Quoted 2 lines
2.7.4
Regards,
Bin
PATCH 6/7 board: sifive: add HiFive Unmatched board support
Hi Green,
Quoted 27 lines · Green Wan
Quoted 13 lines · Bin Meng
Quoted 10 lines · Green Wan
Add dts, defconfig and board support for HiFive Unmatched.
Signed-off-by Green Wan <[email protected]>--- arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi | 1489 ++++++++++++++++++++ arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi | 40 + arch/riscv/dts/hifive-unmatched-a00.dts | 263 ++++ board/sifive/fu540/Kconfig | 1 - board/sifive/fu540/fu540.c | 2 +-Quoted 1 line
It looks these fu540 changes are not needed?
Let me remove the change for fu540 first and check on fu540.
Quoted 6 lines
Quoted 5 lines
board/sifive/hifive_unmatched_fu740/Kconfig | 50 + board/sifive/hifive_unmatched_fu740/MAINTAINERS | 9 + board/sifive/hifive_unmatched_fu740/Makefile | 9 +
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
.../hifive-unmatched-fu740.c | 24 + board/sifive/hifive_unmatched_fu740/spl.c | 85 ++ configs/sifive_hifive_unmatched_fu740_defconfig | 57 +I'd like to rename "board/sifive/hifive_unmatched_fu740" to the shorter name "board/sifive/unmatched". And "configs/sifive_hifive_unmatched_fu740_defconfig" to "configs/sifive_unmatched_defconfig" in v2 patch.
Agree. I sent a patch to rename fu540 to unleashed, so that this is consistent.
http://patchwork.ozlabs.org/project/uboot/patch/20210316030622.40768-1-bmeng.cn at gmail.com/
You may rebase v2 on top of that patch.
Quoted 11 lines
Quoted 11 lines
Quoted 3 lines
doc/board/sifive/fu540.rst | 19 +-here?
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst | 532 +++++++ drivers/reset/Kconfig | 2 +- include/configs/sifive-fu540.h | 5 -and here?
Regards,
Bin
PATCH 6/7 board: sifive: add HiFive Unmatched board support
Thanks, Bin, will rebase it for v2 patch.
Quoted 62 lines · Bin Meng
Hi Green,
Quoted 5 lines · Green Wan
Quoted 1 line · Bin Meng
Quoted 7 lines
Quoted 7 lines · Green Wan
Quoted 6 lines
Add dts, defconfig and board support for HiFive Unmatched.
Signed-off-by Green Wan <[email protected]>--- arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi | 1489++++++++++++++++++++
Quoted 15 lines
Quoted 6 lines
Quoted 4 lines
arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi | 40 + arch/riscv/dts/hifive-unmatched-a00.dts | 263 ++++ board/sifive/fu540/Kconfig | 1 - board/sifive/fu540/fu540.c | 2 +-It looks these fu540 changes are not needed?
Let me remove the change for fu540 first and check on fu540.
Quoted 6 lines
Quoted 5 lines
board/sifive/hifive_unmatched_fu740/Kconfig | 50 + board/sifive/hifive_unmatched_fu740/MAINTAINERS | 9 + board/sifive/hifive_unmatched_fu740/Makefile | 9 +Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
.../hifive-unmatched-fu740.c | 24 + board/sifive/hifive_unmatched_fu740/spl.c | 85 ++ configs/sifive_hifive_unmatched_fu740_defconfig | 57 +I'd like to rename "board/sifive/hifive_unmatched_fu740" to the
shorter name "board/sifive/unmatched". And "configs/sifive_hifive_unmatched_fu740_defconfig" to "configs/sifive_unmatched_defconfig" in v2 patch.
Agree. I sent a patch to rename fu540 to unleashed, so that this is consistent.
http://patchwork.ozlabs.org/project/uboot/patch/20210316030622.40768-1-bmeng.cn at gmail.com/
You may rebase v2 on top of that patch.
Quoted 11 lines
Quoted 11 lines
Quoted 3 lines
doc/board/sifive/fu540.rst | 19 +-here?
Quoted 3 lines
doc/board/sifive/hifive_unmatched_fu740.rst | 532 +++++++ drivers/reset/Kconfig | 2 +- include/configs/sifive-fu540.h | 5 -and here?
Regards,
Bin
PATCH 7/7 drivers: net: macb: add fu740 support
In reply to Green WanAdd fu740 support to macb ethernet driver
--- drivers/net/macb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/net/macb.c +7 -1
@@ -592,7 +592,11 @@ static int macb_sifive_clk_init(struct udevice *dev, ulong rate)* and output clock on GMII output signal GTX_CLK * 1 = MII mode. Use MII input signal TX_CLK in TX logic */ -writel (rate !=125000000 , gemgxl_regs); +if (device_is_compatible (dev,"sifive,fu540-c000-gem" )) +writel (rate !=125000000 , gemgxl_regs); +else if (device_is_compatible (dev,"sifive,fu740-c000-gem" )) +writel (rate !=125125000 , gemgxl_regs); +return 0 ; }
@@ -1507,6 +1511,8 @@ static const struct udevice_id macb_eth_ids[] = { { .compatible = "cdns,zynq-gem" }, { .compatible = "sifive,fu540-c000-gem", .data = (ulong)&sifive_config }, + { .compatible = "sifive,fu740-c000-gem", + .data = (ulong)&sifive_config }, { .compatible = "microchip,mpfs-mss-gem", .data = (ulong)µchip_config }, { }
Signature · 1 line
2.7.4
PATCH 7/7 drivers: net: macb: add fu740 support
Quoted 13 lines · Green Wan
Add fu740 support to macb ethernet driver
Signed-off-by Green Wan <[email protected]>--- drivers/net/macb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)drivers/net/macb.c +0
-0
drivers/net/macb.c static int macb_sifive_clk_init(struct udevice *dev, ulong rate) · line 598
Quoted 8 lines
drivers/net/macb.c +4
-1@@ -592,7 +592,11 @@ static int macb_sifive_clk_init(struct udevice *dev, ulong rate)* and output clock on GMII output signal GTX_CLK * 1 = MII mode. Use MII input signal TX_CLK in TX logic */ -writel (rate !=125000000 , gemgxl_regs); +if (device_is_compatible (dev,"sifive,fu540-c000-gem" )) +writel (rate !=125000000 , gemgxl_regs); +else if (device_is_compatible (dev,"sifive,fu740-c000-gem" )) +writel (rate !=125125000 , gemgxl_regs);
125125000 seems to be an odd value for 1000 Mbps ethernet. Can you please explain this a little bit?
Quoted 6 lines
drivers/net/macb.c +1
-0+return 0 ; }
drivers/net/macb.c static const struct udevice_id macb_eth_ids[] = { · line 1518
Quoted 8 lines
drivers/net/macb.c +2
-0@@ -1507,6 +1511,8 @@ static const struct udevice_id macb_eth_ids[] = { { .compatible = "cdns,zynq-gem" }, { .compatible = "sifive,fu540-c000-gem", .data = (ulong)&sifive_config }, + { .compatible = "sifive,fu740-c000-gem", + .data = (ulong)&sifive_config }, { .compatible = "microchip,mpfs-mss-gem", .data = (ulong)µchip_config }, { }
Regards,
Bin
PATCH 7/7 drivers: net: macb: add fu740 support
Bin Meng <[email protected]>? 2021?3?11? ?????10:22???
Quoted 24 lines · Green Wan
drivers/net/macb.c static int macb_sifive_clk_init(struct udevice
Quoted 13 lines
Add fu740 support to macb ethernet driver
Signed-off-by Green Wan <[email protected]>--- drivers/net/macb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)drivers/net/macb.c +0
-0@@ -592,7 +592,11 @@ static int macb_sifive_clk_init(struct udevice*dev, ulong rate)
drivers/net/macb.c static int macb_sifive_clk_init(struct udevice *dev, ulong rate) · line 598
Quoted 8 lines
drivers/net/macb.c +4
-1* and output clock on GMII output signal GTX_CLK * 1 = MII mode. Use MII input signal TX_CLK in TX logic */ -writel (rate !=125000000 , gemgxl_regs); +if (device_is_compatible (dev,"sifive,fu540-c000-gem" )) +writel (rate !=125000000 , gemgxl_regs); +else if (device_is_compatible (dev,"sifive,fu740-c000-gem" )) +writel (rate !=125125000 , gemgxl_regs);
Quoted 2 lines
125125000 seems to be an odd value for 1000 Mbps ethernet. Can you please explain this a little bit?
It's simply due to the limitation in the PLL cannot generate 125 000 000 Hz clock precisely. The closet one is 125 125 000 HZ.
Quoted 19 lines
Quoted 7 lines
drivers/net/macb.c +1
-0+return 0 ; }drivers/net/macb.c static const struct udevice_id macb_eth_ids[] = { · line 1518
Quoted 8 lines
drivers/net/macb.c +2
-0@@ -1507,6 +1511,8 @@ static const struct udevice_id macb_eth_ids[] = { { .compatible = "cdns,zynq-gem" }, { .compatible = "sifive,fu540-c000-gem", .data = (ulong)&sifive_config }, + { .compatible = "sifive,fu740-c000-gem", + .data = (ulong)&sifive_config }, { .compatible = "microchip,mpfs-mss-gem", .data = (ulong)µchip_config }, { }Regards,
Bin
PATCH 7/7 drivers: net: macb: add fu740 support
Quoted 32 lines · Green Wan
Bin Meng <[email protected]>? 2021?3?11? ?????10:22???
Quoted 10 lines · Green Wan
Quoted 8 lines
Add fu740 support to macb ethernet driver
Signed-off-by Green Wan <[email protected]>--- drivers/net/macb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)Quoted 16 lines
drivers/net/macb.c static int macb_sifive_clk_init(struct udevice *dev, ulong rate) · line 598
Quoted 13 lines
drivers/net/macb.c +4
-1@@ -592,7 +592,11 @@ static int macb_sifive_clk_init(struct udevice *dev, ulong rate)* and output clock on GMII output signal GTX_CLK * 1 = MII mode. Use MII input signal TX_CLK in TX logic */ -writel (rate !=125000000 , gemgxl_regs); +if (device_is_compatible (dev,"sifive,fu540-c000-gem" )) +writel (rate !=125000000 , gemgxl_regs); +else if (device_is_compatible (dev,"sifive,fu740-c000-gem" )) +writel (rate !=125125000 , gemgxl_regs);125125000 seems to be an odd value for 1000 Mbps ethernet. Can you please explain this a little bit?
Quoted 1 line
It's simply due to the limitation in the PLL cannot generate 125 000 000 Hz clock precisely. The closet one is 125 125 000 HZ.
So FU540 can but FU740 cannot? I would consider this as a hardware regression ...
Regards,
Bin
PATCH 7/7 drivers: net: macb: add fu740 support
Quoted 34 lines · Bin Meng
Quoted 32 lines · Green Wan
Bin Meng <[email protected]>? 2021?3?11? ?????10:22???
Quoted 26 lines · Green Wan
Quoted 13 lines
Add fu740 support to macb ethernet driver
Signed-off-by Green Wan <[email protected]>--- drivers/net/macb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)drivers/net/macb.c +0
-0drivers/net/macb.c static int macb_sifive_clk_init(struct udevice *dev, ulong rate) · line 598
Quoted 8 lines
drivers/net/macb.c +4
-1@@ -592,7 +592,11 @@ static int macb_sifive_clk_init(struct udevice *dev, ulong rate)* and output clock on GMII output signal GTX_CLK * 1 = MII mode. Use MII input signal TX_CLK in TX logic */ -writel (rate !=125000000 , gemgxl_regs); +if (device_is_compatible (dev,"sifive,fu540-c000-gem" )) +writel (rate !=125000000 , gemgxl_regs); +else if (device_is_compatible (dev,"sifive,fu740-c000-gem" )) +writel (rate !=125125000 , gemgxl_regs);125125000 seems to be an odd value for 1000 Mbps ethernet. Can you please explain this a little bit?
Quoted 4 lines
Quoted 1 line
It's simply due to the limitation in the PLL cannot generate 125 000 000 Hz clock precisely. The closet one is 125 125 000 HZ.
So FU540 can but FU740 cannot? I would consider this as a hardware regression ...
Note that 125.125MHz is out of spec, but that's the closest we can get and 1Gbps works fine based on the tests I did.
This is hardware quirk, and probably a comment explaining this should be provided here.
david
Quoted 3 lines
Regards,
Bin