patch "iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel" added to staging-linus

This is a note to let you know that I've just added the patch titled

iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel

to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From 7d200b283aa049fcda0d43dd6e03e9e783d2799c Mon Sep 17 00:00:00 2001
From: Jonathan Albrieux <[email protected]>
Date: Wed, 13 Jan 2021 16:18:07 +0100
Subject: iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel

Checking at both msm8909-pm8916.dtsi and msm8916.dtsi from downstream it is indicated that "batt_id" channel has to be scaled with the default function:

	chan@31 {
		label = "batt_id";
		reg = <0x31>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0xb>;
		qcom,fast-avg-setup = <0>;
	};

Change LR_MUX2_BAT_ID scaling accordingly.

---
 drivers/iio/adc/qcom-spmi-vadc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index b0388f8a69f4..7e7d408452ec 100644
@@ -598,7 +598,7 @@ static const struct vadc_channels vadc_chans[] = {
 	VADC_CHAN_NO_SCALE(P_MUX16_1_3, 1)
 
 	VADC_CHAN_NO_SCALE(LR_MUX1_BAT_THERM, 0)
-	VADC_CHAN_NO_SCALE(LR_MUX2_BAT_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0, SCALE_DEFAULT)
 	VADC_CHAN_NO_SCALE(LR_MUX3_XO_THERM, 0)
 	VADC_CHAN_NO_SCALE(LR_MUX4_AMUX_THM1, 0)
 	VADC_CHAN_NO_SCALE(LR_MUX5_AMUX_THM2, 0)

2.30.2