ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion
Subsystems (3)
PATCH 1/1 ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion
This finally removes all remaining SAMSUNG_CLOCK conditional code from s3c24xx architectures.
Signed-off-by Heiko Stuebner <[email protected]>
---
This is of course meant to go on top of the s3c2410 ccf conversion
arch/arm/mach-s3c24xx/Kconfig | 5 ----- arch/arm/mach-s3c24xx/common.c | 17 ----------------- arch/arm/mach-s3c24xx/cpufreq-utils.c | 6 ------ arch/arm/mach-s3c24xx/mach-anubis.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-bast.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-osiris.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-rx1950.c | 14 -------------- arch/arm/mach-s3c24xx/mach-vr1000.c | 27 --------------------------- arch/arm/mach-s3c24xx/pm.c | 12 ------------ 9 files changed, 162 deletions(-)
arch/arm/mach-s3c24xx/Kconfig +0 -5
@@ -265,7 +265,6 @@ config ARCH_BAST select ISA select MACH_BAST_IDE select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ - select S3C24XX_DCLK if SAMSUNG_CLOCK select S3C2410_COMMON_DCLK if COMMON_CLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM
@@ -347,7 +346,6 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C24XX_DCLK if SAMSUNG_CLOCK select S3C2410_COMMON_DCLK if COMMON_CLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM
@@ -533,7 +531,6 @@ config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM select S3C2440_XTAL_12000000 - select S3C24XX_DCLK if SAMSUNG_CLOCK select S3C2410_COMMON_DCLK if COMMON_CLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST
@@ -574,7 +571,6 @@ config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 - select S3C24XX_DCLK if SAMSUNG_CLOCK select S3C2410_COMMON_DCLK if COMMON_CLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND
@@ -646,7 +642,6 @@ config MACH_RX1950 select PM_H1940 if PM select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_DCLK if SAMSUNG_CLOCK select S3C24XX_COMMON_DCLK if COMMON_CLK select S3C24XX_PWM select S3C_DEV_NAND
arch/arm/mach-s3c24xx/common.c +0 -17
@@ -307,23 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* initialise all the clocks */ - -#ifdef CONFIG_SAMSUNG_CLOCK -void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, -unsigned long hclk, -unsigned long pclk) -{ - clk_upll.rate =s3c24xx_get_pll (__raw_readl (S3C2410_UPLLCON ), - clk_xtal.rate); - - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; -} -#endif -#if defined(CONFIG_CPU_S3C2410 ) || defined(CONFIG_CPU_S3C2412 ) || \ defined(CONFIG_CPU_S3C2440 ) || defined(CONFIG_CPU_S3C2442 ) static struct resource s3c2410_dma_resource[] = {
arch/arm/mach-s3c24xx/cpufreq-utils.c +0 -6
@@ -61,12 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)*/ void s3c2410_set_fvco (struct s3c_cpufreq_config *cfg) { -#ifdef CONFIG_SAMSUNG_CLOCK -__raw_writel (cfg->pll.driver_data,S3C2410_MPLLCON ); -#endif - -#ifdef CONFIG_COMMON_CLK if (!IS_ERR (cfg->mpll))clk_set_rate (cfg->mpll, cfg->pll.frequency); -#endif }
arch/arm/mach-s3c24xx/mach-anubis.c +0 -27
@@ -364,16 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -#ifdef CONFIG_SAMSUNG_CLOCK -static struct clk *anubis_clocks[]__initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; -#endif -/* I2C devices. */ static struct i2c_board_info anubis_i2c_devs[]__initdata = {
@@ -396,23 +386,6 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {static void __init anubis_map_io (void ) { -#ifdef CONFIG_SAMSUNG_CLOCK -/* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate =12 *1000 *1000 ; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate =24 *1000 *1000 ; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - -s3c24xx_register_clocks (anubis_clocks,ARRAY_SIZE (anubis_clocks)); -#endif -s3c24xx_init_io (anubis_iodesc,ARRAY_SIZE (anubis_iodesc));s3c24xx_init_uarts (anubis_uartcfgs,ARRAY_SIZE (anubis_uartcfgs));samsung_set_timer_source (SAMSUNG_PWM3 ,SAMSUNG_PWM4 );
arch/arm/mach-s3c24xx/mach-bast.c +0 -27
@@ -537,16 +537,6 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -#ifdef CONFIG_SAMSUNG_CLK -static struct clk *bast_clocks[]__initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; -#endif -static struct s3c_cpufreq_board __initdata bast_cpufreq = { .refresh =7800 ,/* 7.8usec */ .auto_io =1 ,
@@ -560,23 +550,6 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {static void __init bast_map_io (void ) { -#ifdef CONFIG_SAMSUNG_CLOCK -/* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate =12 *1000 *1000 ; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate =24 *1000 *1000 ; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - -s3c24xx_register_clocks (bast_clocks,ARRAY_SIZE (bast_clocks)); -#endif -s3c_hwmon_set_platdata (&bast_hwmon_info);s3c24xx_init_io (bast_iodesc,ARRAY_SIZE (bast_iodesc));
arch/arm/mach-s3c24xx/mach-osiris.c +0 -27
@@ -350,16 +350,6 @@ static struct platform_device *osiris_devices[] __initdata = { &osiris_pcmcia, }; -#ifdef CONFIG_SAMSUNG_CLOCK -static struct clk *osiris_clocks[]__initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; -#endif -static struct s3c_cpufreq_board __initdata osiris_cpufreq = { .refresh =7800 ,/* refresh period is 7.8usec */ .auto_io =1 ,
@@ -370,23 +360,6 @@ static void __init osiris_map_io(void) {unsigned long flags; -#ifdef CONFIG_SAMSUNG_CLOCK -/* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate =12 *1000 *1000 ; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate =24 *1000 *1000 ; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - -s3c24xx_register_clocks (osiris_clocks,ARRAY_SIZE (osiris_clocks)); -#endif -s3c24xx_init_io (osiris_iodesc,ARRAY_SIZE (osiris_iodesc));s3c24xx_init_uarts (osiris_uartcfgs,ARRAY_SIZE (osiris_uartcfgs));samsung_set_timer_source (SAMSUNG_PWM3 ,SAMSUNG_PWM4 );
arch/arm/mach-s3c24xx/mach-rx1950.c +0 -14
@@ -728,22 +728,8 @@ static struct platform_device *rx1950_devices[] __initdata = { &rx1950_leds, }; -#ifdef CONFIG_SAMSUNG_CLOCK -static struct clk *rx1950_clocks[]__initdata = { - &s3c24xx_clkout0, - &s3c24xx_clkout1, -}; -#endif -static void __init rx1950_map_io (void ) { -#ifdef CONFIG_SAMSUNG_CLOCK - s3c24xx_clkout0.parent = &clk_h; - s3c24xx_clkout1.parent = &clk_f; - -s3c24xx_register_clocks (rx1950_clocks,ARRAY_SIZE (rx1950_clocks)); -#endif -s3c24xx_init_io (rx1950_iodesc,ARRAY_SIZE (rx1950_iodesc));s3c24xx_init_uarts (rx1950_uartcfgs,ARRAY_SIZE (rx1950_uartcfgs));samsung_set_timer_source (SAMSUNG_PWM3 ,SAMSUNG_PWM4 );
arch/arm/mach-s3c24xx/mach-vr1000.c +0 -27
@@ -299,16 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -#ifdef CONFIG_SAMSUNG_CLOCK -static struct clk *vr1000_clocks[]__initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; -#endif -static void vr1000_power_off (void ) {gpio_direction_output (S3C2410_GPB (9 ),1 );
@@ -316,23 +306,6 @@ static void vr1000_power_off(void)static void __init vr1000_map_io (void ) { -#if CONFIG_SAMSUNG_CLOCK -/* initialise clock sources */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate =12 *1000 *1000 ; - - s3c24xx_dclk1.parent =NULL ; - s3c24xx_dclk1.rate =3692307 ; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - -s3c24xx_register_clocks (vr1000_clocks,ARRAY_SIZE (vr1000_clocks)); -#endif - pm_power_off = vr1000_power_off;s3c24xx_init_io (vr1000_iodesc,ARRAY_SIZE (vr1000_iodesc));
arch/arm/mach-s3c24xx/pm.c +0 -12
@@ -66,18 +66,6 @@ static struct sleep_save core_save[] = {SAVE_ITEM (S3C2410_BANKCON3 ),SAVE_ITEM (S3C2410_BANKCON4 ), SAVE_ITEM(S3C2410_BANKCON5), - -#ifdef CONFIG_SAMSUNG_CLOCK -SAVE_ITEM (S3C2410_LOCKTIME ), -SAVE_ITEM (S3C2410_CLKCON ), -#ifndef CONFIG_CPU_FREQ -SAVE_ITEM (S3C2410_CLKDIVN ), -SAVE_ITEM (S3C2410_MPLLCON ), -SAVE_ITEM (S3C2410_REFRESH ), -#endif -SAVE_ITEM (S3C2410_UPLLCON ), - SAVE_ITEM(S3C2410_CLKSLOW), -#endif /* CONFIG_SAMSUNG_CLOCK */ };/* s3c_pm_check_resume_pin
Signature · 1 line
1.9.0
PATCH 1/1 ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion
Quoted 8 lines · Heiko St?bner
This finally removes all remaining
SAMSUNG_CLOCKconditional code from s3c24xx architectures.Signed-off-by Heiko Stuebner <[email protected]>---
This is of course meant to go on top of the s3c2410 ccf conversion
Quoted 11 lines
arch/arm/mach-s3c24xx/Kconfig | 5 ----- arch/arm/mach-s3c24xx/common.c | 17 ----------------- arch/arm/mach-s3c24xx/cpufreq-utils.c | 6 ------ arch/arm/mach-s3c24xx/mach-anubis.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-bast.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-osiris.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-rx1950.c | 14 -------------- arch/arm/mach-s3c24xx/mach-vr1000.c | 27 --------------------------- arch/arm/mach-s3c24xx/pm.c | 12 ------------ 9 files changed, 162 deletions(-)
At last, we're supporting common clock framework for s3c24xx.
Heiko, very thanks for your effort.
Will apply with your previous s3c24xx ccf series.
- Kukjin