platform: Remove platform/thead
PATCH 1/2 platform: Remove platform/thead
From: Guo Ren <[email protected]>
We could use platform/generic instead, and won't use it again.
--- docs/platform/platform.md | 3 - docs/platform/thead-c910.md | 34 --------- platform/thead/c910/config.mk | 14 ---- platform/thead/c910/objects.mk | 5 -- platform/thead/c910/platform.c | 156 --------------------------------------- platform/thead/c910/platform.h | 46 ------------ scripts/create-binary-archive.sh | 1 - 7 files changed, 259 deletions(-) delete mode 100644 docs/platform/thead-c910.md delete mode 100644 platform/thead/c910/config.mk delete mode 100644 platform/thead/c910/objects.mk delete mode 100644 platform/thead/c910/platform.c delete mode 100644 platform/thead/c910/platform.h
docs/platform/platform.md +0 -3
@@ -28,9 +28,6 @@ OpenSBI currently supports the following virtual and hardware platforms: * **Andes AE350 SoC**: Platform support for the Andes's SoC (AE350). More details on this platform can be found in the file *[andes-ae350.md]*. -* **T-HEAD C910**: Platform support for the T-HEAD C910 Processor. More - details on this platform can be found in the file *[thead-c910.md]*. - * **Spike**: Platform support for the Spike emulator. More details on this platform can be found in the file *[spike.md]*.
docs/platform/thead-c910.md deleted +0 -34
@@ -1,34 +0,0 @@ -T-HEAD C910 Processor -===================== -C910 is a 12-stage, 3 issues, 8 executions, out-of-order 64-bit RISC-V CPU which -supports 16 cores, runs with 2.5GHz, and is capable of running Linux. - -To build platform specific library and firmwares, provide the -*PLATFORM=thead/c910* parameter to the top level make command. - -Platform Options ----------------- - -The *T-HEAD C910* platform does not have any platform-specific options. - -Building T-HEAD C910 Platform ------------------------------ - -``` -make PLATFORM=thead/c910 -``` - -Booting T-HEAD C910 Platform ----------------------------- - -**No Payload** - -As there's no payload, you may download vmlinux or u-boot to FW_JUMP_ADDR which -specified in config.mk or compile commands with GDB. And the execution flow will -turn to vmlinux or u-boot when opensbi ends. - -**Linux Kernel Payload** - -You can also choose to use Linux kernel as payload by enabling FW_PAYLOAD=y -along with specifying FW_PAYLOAD_OFFSET. The kernel image will be embedded in -the OPENSBI firmware binary, T-head will directly boot into Linux after OpenSBI.
platform/thead/c910/config.mk deleted +0 -14
@@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# - -# Compiler flags -platform-cppflags-y = -platform-cflags-y = -platform-asflags-y = -platform-ldflags-y = - -# Blobs to build -FW_TEXT_START?=0x0 -FW_JUMP=y -FW_JUMP_ADDR?=0x00200000
platform/thead/c910/objects.mk deleted +0 -5
@@ -1,5 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# - -platform-objs-y += platform.o
platform/thead/c910/platform.c deleted +0 -156
156 lines not on this page · raw message
platform/thead/c910/platform.h deleted +0 -46
46 lines not on this page · raw message
scripts/create-binary-archive.sh +0 -1
@@ -106,7 +106,6 @@ build_opensbi() { BUILD_PLATFORM_SUBDIR+=("fpga/ariane") BUILD_PLATFORM_SUBDIR+=("fpga/openpiton") BUILD_PLATFORM_SUBDIR+=("andes/ae350") - BUILD_PLATFORM_SUBDIR+=("thead/c910") BUILD_PLATFORM_SUBDIR+=("generic") ;; *)
Signature · 1 line
2.7.4
PATCH 2/2 doc: generic: Add T-HEAD C9xx series processors
From: Guo Ren <[email protected]>
Add description and dts examples for startup.
--- docs/platform/generic.md | 2 + docs/platform/thead-c9xx.md | 197 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 199 insertions(+) create mode 100644 docs/platform/thead-c9xx.md
docs/platform/generic.md +2 -0
@@ -48,7 +48,9 @@ RISC-V Platforms Using Generic Platform * **QEMU RISC-V Virt Machine** (*[qemu_virt.md]*) * **Spike** (*[spike.md]*) * **Shakti C-class SoC Platform** (*[shakti_cclass.md]*) +* **T-HEAD C9xx series Processors** (*[thead-c9xx.md]*) [qemu_virt.md]: qemu_virt.md [spike.md]: spike.md [shakti_cclass.md]: shakti_cclass.md +[thead-c9xx.md]: thead-c9xx.md
docs/platform/thead-c9xx.md new file +197 -0
197 lines not on this page · raw message
Signature · 1 line
2.7.4
Anup Patel
AppliedPATCH 2/2 doc: generic: Add T-HEAD C9xx series processors
Quoted 10 lines
-----Original Message-----
From: opensbi <[email protected]> On Behalf Of guoren at kernel.org
Sent: 27 April 2021 12:18
To: guoren at kernel.org; anup at brainfault.org
Cc: opensbi at lists.infradead.org; Guo Ren <[email protected]>
Subject: [PATCH 2/2] doc: generic: Add T-HEAD C9xx series processors
Quoted 6 lines
From: Guo Ren <[email protected]>
Add description and dts examples for startup.
Signed-off-by Guo Ren <[email protected]>Reviewed-by Anup Patel <[email protected]>
I did some minor fixes in thead-c9xx.md at time of merging.
Applied this patch to the riscv/opensbi repo
Thanks,
Anup
Quoted 234 lines
--- docs/platform/generic.md | 2 + docs/platform/thead-c9xx.md | 197 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 199 insertions(+) create mode 100644 docs/platform/thead-c9xx.mddocs/platform/generic.md index renamed from docs/platform/generic.md +0
-0f1f7f64..8c3b0dd 100644
docs/platform/generic.md +2
-0@@ -48,7 +48,9 @@ RISC-V Platforms Using Generic Platform * **QEMU RISC-V Virt Machine** (*[qemu_virt.md]*) * **Spike** (*[spike.md]*) * **Shakti C-class SoC Platform** (*[shakti_cclass.md]*) +* **T-HEAD C9xx series Processors** (*[thead-c9xx.md]*) [qemu_virt.md]: qemu_virt.md [spike.md]: spike.md [shakti_cclass.md]: shakti_cclass.md +[thead-c9xx.md]: thead-c9xx.mddocs/platform/thead-c9xx.md new file +22
-0@@ -0,0 +1,197 @@ +T-HEAD C9xx Series Processors +============================= + +The **C9xx** series processors are high-performance RISC-V architecture +multi-core processors with AI vector acceleration engine. + +For more details, refer [T-HEAD.CN](https://www.t-head.cn/) + +To build the platform-specific library and firmware images, provide the +*PLATFORM=generic* parameter to the top level `make` command. + +Platform Options +---------------- + +The *T-HEAD C9xx* does not have any platform-specific compile options. + +CROSS_COMPILE=riscv64-linux-gnu- PLATFORM=generic FW_PIC=y +/usr/bin/make + +It depends on "riscv,clint0", "riscv,plic0", "thead,reset-sample" drivers. + +We recommend you use fw_dynamic for all platforms(qemu, sifive, spike,thead).
docs/platform/thead-c9xx.md new file +132
-0+ +DTS Example1: (Single core, eg: Allwinner D1 - c906) +---------------------------------------------------- + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <3000000>; + cpu at 0 { + device_type = "cpu"; + reg = <0>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64imafdcv"; + mmu-type = "riscv,sv39"; + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + reset: reset-sample { + compatible = "thead,reset-sample"; + plic-delegate = <0x0 0x101ffffc>; + }; + + clint0: clint at 14000000 { + compatible = "riscv,clint0"; + interrupts-extended = < + &cpu0_intc 3 &cpu0_intc 7 + >; + reg = <0x0 0x14000000 0x0 0x04000000>; + clint,has-no-64bit-mmio; + }; + + intc: interrupt-controller at 10000000 { + #interrupt-cells = <1>; + compatible = "riscv,plic0"; + interrupt-controller; + interrupts-extended = < + &cpu0_intc 0xffffffff &cpu0_intc 9 + >; + reg = <0x0 0x10000000 0x0 0x04000000>; + reg-names = "control"; + riscv,max-priority = <7>; + riscv,ndev = <200>; + }; + } + +DTS Example2: (Multi cores with soc reset-regs) +----------------------------------------------- + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <3000000>; + cpu at 0 { + device_type = "cpu"; + reg = <0>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv39"; + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu at 1 { + device_type = "cpu"; + reg = <1>; + status = "fail"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv39"; + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu at 2 { + device_type = "cpu"; + reg = <2>; + status = "fail"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv39"; + cpu2_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu at 3 { + device_type = "cpu"; + reg = <3>; + status = "fail"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv39"; + cpu3_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + reset: reset-sample { + compatible = "thead,reset-sample"; + plic-delegate = <0xff 0xd81ffffc>; + entry-reg = <0xff 0xff019050>; + entry-cnt = <4>; + control-reg = <0xff 0xff015004>; + control-val = <0x1c>; + csr-copy = <0x7f3 0x7c0 0x7c1 0x7c2 0x7c3 0x7c5
0x7cc>;docs/platform/thead-c9xx.md new file +44
-1+ }; + + clint0: clint at ffdc000000 { + compatible = "riscv,clint0"; + interrupts-extended = < + &cpu0_intc 3 &cpu0_intc 7 + &cpu1_intc 3 &cpu1_intc 7 + &cpu2_intc 3 &cpu2_intc 7 + &cpu3_intc 3 &cpu3_intc 7 + &cpu4_intc 3 &cpu4_intc 7 + >; + reg = <0xff 0xdc000000 0x0 0x04000000>; + clint,has-no-64bit-mmio; + }; + + intc: interrupt-controller at ffd8000000 { + #interrupt-cells = <1>; + compatible = "riscv,plic0"; + interrupt-controller; + interrupts-extended = < + &cpu0_intc 0xffffffff &cpu0_intc 9 + &cpu1_intc 0xffffffff &cpu1_intc 9 + &cpu2_intc 0xffffffff &cpu2_intc 9 + &cpu3_intc 0xffffffff &cpu3_intc 9 + >; + reg = <0xff 0xd8000000 0x0 0x04000000>; + reg-names = "control"; + riscv,max-priority = <7>; + riscv,ndev = <80>; + }; + } + +DTS Example2: (Multi cores with old reset csrs) +----------------------------------------------- + +reset: reset-sample { + compatible = "thead,reset-sample"; + plic-delegate = <0xff 0xd81ffffc>; + using-csr-reset; + csr-copy = <0x7c0 0x7c1 0x7c2 0x7c3 0x7c5 0x7cc + 0x3b0 0x3b1 0x3b2 0x3b3 + 0x3b4 0x3b5 0x3b6 0x3b7 + 0x3a0>; +}; --2.7.4
--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi
Anup Patel
AppliedPATCH 1/2 platform: Remove platform/thead
In reply to [email protected]Quoted 10 lines
-----Original Message-----
From: opensbi <[email protected]> On Behalf Of guoren at kernel.org
Sent: 27 April 2021 12:18
To: guoren at kernel.org; anup at brainfault.org
Cc: opensbi at lists.infradead.org; Guo Ren <[email protected]>
Subject: [PATCH 1/2] platform: Remove platform/thead
Quoted 6 lines
From: Guo Ren <[email protected]>
We could use platform/generic instead, and won't use it again.
Signed-off-by Guo Ren <[email protected]>Reviewed-by Anup Patel <[email protected]>
Applied this patch to the riscv/opensbi repo
Thanks,
Anup
Quoted 328 lines
--- docs/platform/platform.md | 3 - docs/platform/thead-c910.md | 34 --------- platform/thead/c910/config.mk | 14 ---- platform/thead/c910/objects.mk | 5 -- platform/thead/c910/platform.c | 156 --------------------------------------- platform/thead/c910/platform.h | 46 ------------ scripts/create-binary-archive.sh | 1 - 7 files changed, 259 deletions(-) delete mode 100644 docs/platform/thead-c910.md delete mode 100644
platform/thead/c910/config.mkdelete mode 100644platform/thead/c910/objects.mkdelete mode 100644platform/thead/c910/platform.cdelete mode 100644platform/thead/c910/platform.hdocs/platform/platform.md index renamed from docs/platform/platform.md +0
-07f47068..b0cff37 100644
docs/platform/platform.md +0
-0@@ -28,9 +28,6 @@ OpenSBI currently supports the following virtual andhardware platforms:
* **Andes AE350 SoC**: Platform support for the Andes's SoC (AE350).
More
details on this platform can be found in the file *[andes-ae350.md]*.docs/platform/platform.md +0
-3-* **T-HEAD C910**: Platform support for the T-HEAD C910 Processor. More - details on this platform can be found in the file *[thead-c910.md]*. - * **Spike**: Platform support for the Spike emulator. More details on this platform can be found in the file *[spike.md]*.docs/platform/thead-c910.md deleted +0
-3@@ -1,34 +0,0 @@ -T-HEAD C910 Processor -===================== -C910 is a 12-stage, 3 issues, 8 executions, out-of-order 64-bit RISC-V CPUwhich -supports 16 cores, runs with 2.5GHz, and is capable of running Linux.
docs/platform/thead-c910.md deleted +0
-22- -To build platform specific library and firmwares, provide the -*PLATFORM=thead/c910* parameter to the top level make command. - -Platform Options ----------------- - -The *T-HEAD C910* platform does not have any platform-specific options. - -Building T-HEAD C910 Platform ------------------------------ - -``` -make PLATFORM=thead/c910 -``` - -Booting T-HEAD C910 Platform ----------------------------- - -**No Payload** - -As there's no payload, you may download vmlinux or u-boot to
FW_JUMP_ADDRwhich -specified in config.mk or compile commands with GDB. And the execution flow will -turn to vmlinux or u-boot when opensbi ends.docs/platform/thead-c910.md deleted +0
-4- -**Linux Kernel Payload** - -You can also choose to use Linux kernel as payload by enablingFW_PAYLOAD=y -along with specifying
FW_PAYLOAD_OFFSET. The kernel image will be embedded in -the OPENSBI firmware binary, T-head will directly boot into Linux after OpenSBI.platform/thead/c910/config.mk deleted +0
-13@@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# - -# Compiler flags -platform-cppflags-y = -platform-cflags-y = -platform-asflags-y = -platform-ldflags-y = - -# Blobs to build -FW_TEXT_START?=0x0 -FW_JUMP=y -FW_JUMP_ADDR?=0x00200000(quoted diff) +0
-0
b/platform/thead/c910/objects.mkdeleted file mode 100644 index d025a36..0000000platform/thead/c910/objects.mk deleted +0
-4@@ -1,5 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# - -platform-objs-y += platform.o(quoted diff) +0
-0
b/platform/thead/c910/platform.cdeleted file mode 100644 index dfa484a..0000000platform/thead/c910/platform.c deleted +0
-46@@ -1,156 +0,0 @@ -/* -* SPDX-License-Identifier: BSD-2-Clause -*/ - -#include <sbi/riscv_encoding.h> -#include <sbi/riscv_io.h> -#include <sbi/sbi_console.h> -#include <sbi/sbi_const.h> -#include <sbi/sbi_hart.h> -#include <sbi/sbi_platform.h> -#include <sbi_utils/irqchip/plic.h> -#include <sbi_utils/serial/uart8250.h> -#include <sbi_utils/sys/clint.h> -#include "platform.h" - -static struct c910_regs_struct c910_regs; - -static struct clint_data clint = { - .addr =0 ,/* Updated at cold boot time */ - .first_hartid =0 , - .hart_count =C910_HART_COUNT , - .has_64bit_mmio = FALSE, -}; - -static int c910_early_init(bool cold_boot) -{ -if (cold_boot) { -/* Load from boot core */ - c910_regs.pmpaddr0 =csr_read (CSR_PMPADDR0 ); - c910_regs.pmpaddr1 =csr_read (CSR_PMPADDR1 ); - c910_regs.pmpaddr2 =csr_read (CSR_PMPADDR2 ); - c910_regs.pmpaddr3 =csr_read (CSR_PMPADDR3 ); - c910_regs.pmpaddr4 =csr_read (CSR_PMPADDR4 ); - c910_regs.pmpaddr5 =csr_read (CSR_PMPADDR5 ); - c910_regs.pmpaddr6 =csr_read (CSR_PMPADDR6 ); - c910_regs.pmpaddr7 =csr_read (CSR_PMPADDR7 ); - c910_regs.pmpcfg0 =csr_read (CSR_PMPCFG0 ); - - c910_regs.mcor =csr_read (CSR_MCOR ); - c910_regs.mhcr =csr_read (CSR_MHCR ); - c910_regs.mccr2 =csr_read (CSR_MCCR2 ); - c910_regs.mhint =csr_read (CSR_MHINT ); - c910_regs.mxstatus =csr_read (CSR_MXSTATUS ); - - c910_regs.plic_base_addr =csr_read (CSR_PLIC_BASE ); - c910_regs.clint_base_addr = - c910_regs.plic_base_addr +
C910_PLIC_CLINT_OFFSET;platform/thead/c910/platform.c deleted +0
-29- }else { -/* Store to other core */ -csr_write (CSR_PMPADDR0 , c910_regs.pmpaddr0); -csr_write (CSR_PMPADDR1 , c910_regs.pmpaddr1); -csr_write (CSR_PMPADDR2 , c910_regs.pmpaddr2); -csr_write (CSR_PMPADDR3 , c910_regs.pmpaddr3); -csr_write (CSR_PMPADDR4 , c910_regs.pmpaddr4); -csr_write (CSR_PMPADDR5 , c910_regs.pmpaddr5); -csr_write (CSR_PMPADDR6 , c910_regs.pmpaddr6); -csr_write (CSR_PMPADDR7 , c910_regs.pmpaddr7); -csr_write (CSR_PMPCFG0 , c910_regs.pmpcfg0); - -csr_write (CSR_MCOR , c910_regs.mcor); -csr_write (CSR_MHCR , c910_regs.mhcr); -csr_write (CSR_MHINT , c910_regs.mhint); -csr_write (CSR_MXSTATUS , c910_regs.mxstatus); - } - -return 0 ; -} - -static int c910_final_init(bool cold_boot) -{ -return 0 ; -} - -static int c910_irqchip_init(bool cold_boot) -{ -/* Delegate plic enable into S-mode */ - writel(C910_PLIC_DELEG_ENABLE, - (void *)c910_regs.plic_base_addr +
C910_PLIC_DELEG_OFFSET);platform/thead/c910/platform.c deleted +0
-73- -return 0 ; -} - -static int c910_ipi_init(bool cold_boot) -{ -int rc; - -if (cold_boot) { - clint.addr = c910_regs.clint_base_addr; - rc =clint_cold_ipi_init (&clint); -if (rc) -return rc; - } - -return clint_warm_ipi_init (); -} - -static int c910_timer_init(bool cold_boot) -{ -int ret; - -if (cold_boot) { - clint.addr = c910_regs.clint_base_addr; - ret =clint_cold_timer_init (&clint,NULL ); -if (ret) -return ret; - } - -return clint_warm_timer_init (); -} - -static int c910_system_reset_check(u32 type, u32 reason) -{ -return 1 ; -} - -static void c910_system_reset(u32 type, u32 reason) -{ - asmvolatile ("ebreak" ); -} - -int c910_hart_start(u32 hartid, ulong saddr) -{ -csr_write (CSR_MRVBR , saddr); -csr_write (CSR_MRMR ,csr_read (CSR_MRMR ) | (1 << hartid)); - -return 0 ; -} - -const struct sbi_platform_operations platform_ops = { - .early_init = c910_early_init, - .final_init = c910_final_init, - - .irqchip_init = c910_irqchip_init, - - .ipi_init = c910_ipi_init, - .ipi_send = clint_ipi_send, - .ipi_clear = clint_ipi_clear, - - .timer_init = c910_timer_init, - .timer_event_start = clint_timer_event_start, - - .system_reset_check = c910_system_reset_check, - .system_reset = c910_system_reset, - - .hart_start = c910_hart_start, -}; - -const struct sbi_platform platform = { - .opensbi_version =OPENSBI_VERSION , - .platform_version =SBI_PLATFORM_VERSION (0x0 ,0x01 ), - .name ="T-HEAD Xuantie c910" , - .features =SBI_THEAD_FEATURES , - .hart_count =C910_HART_COUNT , - .hart_stack_size =SBI_PLATFORM_DEFAULT_HART_STACK_SIZE , - .platform_ops_addr = (unsigned long )&platform_ops -};(quoted diff) +0
-0
b/platform/thead/c910/platform.hdeleted file mode 100644 index 354404e..0000000platform/thead/c910/platform.h deleted +0
-46@@ -1,46 +0,0 @@ -/* -* SPDX-License-Identifier: BSD-2-Clause -*/ - -#ifndef _C910_PLATFORM_H_ -#define _C910_PLATFORM_H_ - -#define C910_HART_COUNT 16 - -#define SBI_THEAD_FEATURES \ - (SBI_PLATFORM_HAS_MFAULTS_DELEGATION | \ - SBI_PLATFORM_HAS_HART_SECONDARY_BOOT) - -#define CSR_MCOR 0x7c2 -#define CSR_MHCR 0x7c1 -#define CSR_MCCR2 0x7c3 -#define CSR_MHINT 0x7c5 -#define CSR_MXSTATUS 0x7c0 -#define CSR_PLIC_BASE 0xfc1 -#define CSR_MRMR 0x7c6 -#define CSR_MRVBR 0x7c7 - -#define C910_PLIC_CLINT_OFFSET 0x04000000/* 64M */ -#define C910_PLIC_DELEG_OFFSET 0x001ffffc -#define C910_PLIC_DELEG_ENABLE 0x1 - -struct c910_regs_struct { -u64 pmpaddr0; -u64 pmpaddr1; -u64 pmpaddr2; -u64 pmpaddr3; -u64 pmpaddr4; -u64 pmpaddr5; -u64 pmpaddr6; -u64 pmpaddr7; -u64 pmpcfg0; -u64 mcor; -u64 mhcr; -u64 mccr2; -u64 mhint; -u64 mxstatus; -u64 plic_base_addr; -u64 clint_base_addr; -}; - -#endif /* _C910_PLATFORM_H_ */ scripts/create-binary-archive.sh +0
-2@@ -106,7 +106,6 @@ build_opensbi() { BUILD_PLATFORM_SUBDIR+=("fpga/ariane") BUILD_PLATFORM_SUBDIR+=("fpga/openpiton") BUILD_PLATFORM_SUBDIR+=("andes/ae350") - BUILD_PLATFORM_SUBDIR+=("thead/c910") BUILD_PLATFORM_SUBDIR+=("generic") ;; *) --2.7.4
--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi