Update my e-mail address and ACPI info in MAINTAINERS
cover Update my e-mail address and ACPI info in MAINTAINERS
Hi All,
The following two patches update my e-mail address (the one I use for kernel development) and ACPI-related information in MAINTAINERS.
Kind regards,
Rafael
PATCH 1/2 MAINTAINERS / Documentation: Update Rafael's e-mail address
From: Rafael J. Wysocki <[email protected]>
The e-mail address [email protected] that I have been using for quite some time is going to expire at one point, so replace it with a new one, [email protected], everywhere in MAINTAINERS and Documentation/ABI.
Signed-off-by Rafael J. Wysocki <[email protected]>
--- Documentation/ABI/testing/sysfs-devices-power | 32 +++++++++++++------------- Documentation/ABI/testing/sysfs-power | 22 ++++++++--------- MAINTAINERS | 12 ++++----- 3 files changed, 33 insertions(+), 33 deletions(-)
Documentation/ABI/testing/sysfs-devices-power +16 -16
@@ -1,6 +1,6 @@ What: /sys/devices/.../power/ Date: January 2009 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../power directory contains attributes allowing the user space to check and modify some power
@@ -8,7 +8,7 @@ Description: What: /sys/devices/.../power/wakeup Date: January 2009 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../power/wakeup attribute allows the user space to check if the device is enabled to wake up the system
@@ -34,7 +34,7 @@ Description: What: /sys/devices/.../power/control Date: January 2009 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../power/control attribute allows the user space to control the run-time power management of the device.
@@ -53,7 +53,7 @@ Description: What: /sys/devices/.../power/async Date: January 2009 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../async attribute allows the user space to enable or diasble the device's suspend and resume callbacks to
@@ -79,7 +79,7 @@ Description: What: /sys/devices/.../power/wakeup_count Date: September 2010 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_count attribute contains the number of signaled wakeup events associated with the device. This
@@ -88,7 +88,7 @@ Description: What: /sys/devices/.../power/wakeup_active_count Date: September 2010 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_active_count attribute contains the number of times the processing of wakeup events associated with
@@ -98,7 +98,7 @@ Description: What: /sys/devices/.../power/wakeup_abort_count Date: February 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_abort_count attribute contains the number of times the processing of a wakeup event associated with
@@ -109,7 +109,7 @@ Description: What: /sys/devices/.../power/wakeup_expire_count Date: February 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_expire_count attribute contains the number of times a wakeup event associated with the device has
@@ -119,7 +119,7 @@ Description: What: /sys/devices/.../power/wakeup_active Date: September 2010 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_active attribute contains either 1, or 0, depending on whether or not a wakeup event associated with
@@ -129,7 +129,7 @@ Description: What: /sys/devices/.../power/wakeup_total_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_total_time_ms attribute contains the total time of processing wakeup events associated with the
@@ -139,7 +139,7 @@ Description: What: /sys/devices/.../power/wakeup_max_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_max_time_ms attribute contains the maximum time of processing a single wakeup event associated
@@ -149,7 +149,7 @@ Description: What: /sys/devices/.../power/wakeup_last_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_last_time_ms attribute contains the value of the monotonic clock corresponding to the time of
@@ -160,7 +160,7 @@ Description: What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms Date: February 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute contains the total time the device has been preventing
@@ -189,7 +189,7 @@ Description: What: /sys/devices/.../power/pm_qos_latency_us Date: March 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../power/pm_qos_resume_latency_us attribute contains the PM QoS resume latency limit for the given device,
@@ -207,7 +207,7 @@ Description: What: /sys/devices/.../power/pm_qos_no_power_off Date: September 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../power/pm_qos_no_power_off attribute is used for manipulating the PM QoS "no power off" flag. If
@@ -222,7 +222,7 @@ Description: What: /sys/devices/.../power/pm_qos_remote_wakeup Date: September 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/devices/.../power/pm_qos_remote_wakeup attribute is used for manipulating the PM QoS "remote wakeup required"
MAINTAINERS +6 -6
@@ -237,7 +237,7 @@ F: drivers/platform/x86/acer-wmi.c ACPI M: Len Brown <[email protected]> -M: Rafael J. Wysocki <[email protected]> +M: Rafael J. Wysocki <[email protected]> L: [email protected] W: http://www.lesswatts.org/projects/acpi/ Q: http://patchwork.kernel.org/project/linux-acpi/list/
@@ -2294,7 +2294,7 @@ S: Maintained F: drivers/net/ethernet/ti/cpmac.c CPU FREQUENCY DRIVERS -M: Rafael J. Wysocki <[email protected]> +M: Rafael J. Wysocki <[email protected]> M: Viresh Kumar <[email protected]> L: [email protected] L: [email protected]
@@ -2325,7 +2325,7 @@ S: Maintained F: drivers/cpuidle/cpuidle-big_little.c CPUIDLE DRIVERS -M: Rafael J. Wysocki <[email protected]> +M: Rafael J. Wysocki <[email protected]> M: Daniel Lezcano <[email protected]> L: [email protected] S: Maintained
@@ -3547,7 +3547,7 @@ F: fs/freevxfs/ FREEZER M: Pavel Machek <[email protected]> -M: "Rafael J. Wysocki" <[email protected]> +M: "Rafael J. Wysocki" <[email protected]> L: [email protected] S: Supported F: Documentation/power/freezing-of-tasks.txt
@@ -3883,7 +3883,7 @@ F: drivers/video/hgafb.c HIBERNATION (aka Software Suspend, aka swsusp) M: Pavel Machek <[email protected]> -M: "Rafael J. Wysocki" <[email protected]> +M: "Rafael J. Wysocki" <[email protected]> L: [email protected] S: Supported F: arch/x86/power/
@@ -8082,7 +8082,7 @@ F: drivers/sh/ SUSPEND TO RAM M: Len Brown <[email protected]> M: Pavel Machek <[email protected]> -M: "Rafael J. Wysocki" <[email protected]> +M: "Rafael J. Wysocki" <[email protected]> L: [email protected] S: Supported F: Documentation/power/
Documentation/ABI/testing/sysfs-power +11 -11
@@ -1,6 +1,6 @@ What: /sys/power/ Date: August 2006 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power directory will contain files that will provide a unified interface to the power management
@@ -8,7 +8,7 @@ Description: What: /sys/power/state Date: August 2006 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/state file controls the system power state. Reading from this file returns what states are supported,
@@ -22,7 +22,7 @@ Description: What: /sys/power/disk Date: September 2006 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/disk file controls the operating mode of the suspend-to-disk mechanism. Reading from this file returns
@@ -67,7 +67,7 @@ Description: What: /sys/power/image_size Date: August 2006 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/image_size file controls the size of the image created by the suspend-to-disk mechanism. It can be written a
@@ -84,7 +84,7 @@ Description: What: /sys/power/pm_trace Date: August 2006 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/pm_trace file controls the code which saves the last PM event point in the RTC across reboots, so that you can
@@ -133,7 +133,7 @@ Description: What: /sys/power/pm_async Date: January 2009 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/pm_async file controls the switch allowing the user space to enable or disable asynchronous suspend and resume
@@ -146,7 +146,7 @@ Description: What: /sys/power/wakeup_count Date: July 2010 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/wakeup_count file allows user space to put the system into a sleep state while taking into account the
@@ -161,7 +161,7 @@ Description: What: /sys/power/reserved_size Date: May 2011 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/reserved_size file allows user space to control the amount of memory reserved for allocations made by device
@@ -175,7 +175,7 @@ Description: What: /sys/power/autosleep Date: April 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/autosleep file can be written one of the strings returned by reads from /sys/power/state. If that happens, a
@@ -192,7 +192,7 @@ Description: What: /sys/power/wake_lock Date: February 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/wake_lock file allows user space to create wakeup source objects and activate them on demand (if one of
@@ -219,7 +219,7 @@ Description: What: /sys/power/wake_unlock Date: February 2012 -Contact: Rafael J. Wysocki <[email protected]> +Contact: Rafael J. Wysocki <[email protected]> Description: The /sys/power/wake_unlock file allows user space to deactivate wakeup sources created with the help of /sys/power/wake_lock.
PATCH 2/2 MAINTAINERS / ACPI: Update links and git tree information
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Update the ACPI subsystem's git tree and Web links in the MAINTAINERS file.
Signed-off-by Rafael J. Wysocki <[email protected]>
--- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
MAINTAINERS +3 -3
@@ -239,9 +239,9 @@ ACPI M: Len Brown <[email protected]> M: Rafael J. Wysocki <[email protected]> L: [email protected] -W: http://www.lesswatts.org/projects/acpi/ -Q: http://patchwork.kernel.org/project/linux-acpi/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux +W: https://01.org/linux-acpi +Q: https://patchwork.kernel.org/project/linux-acpi/list/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm S: Supported F: drivers/acpi/ F: drivers/pnp/pnpacpi/