Skip to contentSkip to conversation

scsi: ufs-mediatek: fix ufs power down specs violation

PATCH Superseded [email protected] 1 participant 2 messages May 12, 2021 SCSI

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

As per specs, e.g, JESD220E chapter 7.2, while powering off the ufs device, RST_N signal should be between VSS(Ground) and VCCQ/VCCQ2. The power down sequence after fixing as below:

Power down:
1. Assert RST_N low
2. Turn-off VCC
3. Turn-off VCCQ/VCCQ2

 drivers/scsi/ufs/ufs-mediatek.c |    4 ++++
 1 file changed, 4 insertions(+)
#1 lore raw

PATCH v2 1/1 scsi: ufs-mediatek: fix ufs power down specs violation

From: Peter Wang <[email protected]>

As per specs, e.g, JESD220E chapter 7.2, while powering off the ufs device, RST_N signal should be between VSS(Ground) and VCCQ/VCCQ2. The power down sequence after fixing as below:

Power down:
1. Assert RST_N low
2. Turn-off VCC
3. Turn-off VCCQ/VCCQ2

Change-Id I297e9afe3c22bb1a5fc5e7acce9b5ecfd20181ed
---
 drivers/scsi/ufs/ufs-mediatek.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/scsi/ufs/ufs-mediatek.c +4 -0
index c55202b..47f47ab 100644
@@ -922,6 +922,7 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	int err;
+	struct arm_smccc_res res;
 
 	if (ufshcd_is_link_hibern8(hba)) {
 		err = ufs_mtk_link_set_lpm(hba);
@@ -941,6 +942,9 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 			goto fail;
 	}
 
+	if (ufshcd_is_shutdown_pm(pm_op))
+		ufs_mtk_device_reset_ctrl(0, res);
+
 	return 0;
 fail:
 	/*
Signature · 1 line
1.7.9.5