FAILED: patch "[PATCH] KVM: x86: Defer vtime accounting 'til after IRQ handling" failed to apply to 5.10-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 160457140187c5fb127b844e5a85f87f00a01b14 Mon Sep 17 00:00:00 2001
From: Wanpeng Li <[email protected]>
Date: Tue, 4 May 2021 17:27:30 -0700
Subject: [PATCH] KVM: x86: Defer vtime accounting 'til after IRQ handling
Defer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on PF_VCPU being set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence of vcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest.
This fixes a bug where reported guest time remains '0', even when running an infinite loop in the guest:
https://bugzilla.kernel.org/show_bug.cgi?id=209831
arch/x86/kvm/svm/svm.c +3 -3
@@ -3753,15 +3753,15 @@ static noinstr void svm_vcpu_enter_exit(struct kvm_vcpu *vcpu)* have them in state 'on' as recorded before entering guest mode. * Same as enter_from_user_mode(). * -* guest_exit_irqoff() restores host context and reinstates RCU if -* enabled and required. +* context_tracking_guest_exit() restores host context and reinstates +* RCU if enabled and required. * * This needs to be done before the below as native_read_msr() * contains a tracepoint and x86_spec_ctrl_restore_host() calls * into world and some more. */ lockdep_hardirqs_off (CALLER_ADDR0 ); -guest_exit_irqoff (); +context_tracking_guest_exit ();instrumentation_begin ();trace_hardirqs_off_finish ();
arch/x86/kvm/vmx/vmx.c +3 -3
@@ -6703,15 +6703,15 @@ static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,* have them in state 'on' as recorded before entering guest mode. * Same as enter_from_user_mode(). * -* guest_exit_irqoff() restores host context and reinstates RCU if -* enabled and required. +* context_tracking_guest_exit() restores host context and reinstates +* RCU if enabled and required. * * This needs to be done before the below as native_read_msr() * contains a tracepoint and x86_spec_ctrl_restore_host() calls * into world and some more. */ lockdep_hardirqs_off (CALLER_ADDR0 ); -guest_exit_irqoff (); +context_tracking_guest_exit ();instrumentation_begin ();trace_hardirqs_off_finish ();
arch/x86/kvm/x86.c +9 -0
@@ -9315,6 +9315,15 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)local_irq_disable ();kvm_after_interrupt (vcpu); +/* +* Wait until after servicing IRQs to account guest time so that any +* ticks that occurred while running the guest are properly accounted +* to the guest. Waiting until IRQs are enabled degrades the accuracy +* of accounting via context tracking, but the loss of accuracy is +* acceptable for all known use cases. +*/ +vtime_account_guest_exit (); +if (lapic_in_kernel (vcpu)) {s64 delta = vcpu->arch.apic->lapic_timer.advance_expire_delta;if (delta !=S64_MIN ) {
Quoted 6 lines · <[email protected]> 于2021年5月14日周五 下午9:32写道:
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
If I first apply 866a6dadbb02 ("context_tracking: Move guest exit context tracking to separate helpers")
and 88d8220bbf06 ("context_tracking: Move guest exit vtime accounting to separate helpers")
then I can apply this commit cleanly to latest 5.10.y, I suppose it will work for 5.12.
Quoted 4 lines
thanks,
greg k-h
Thanks!
Jack Wang
Quoted 96 lines
------------------ original commit in Linus's tree ------------------
From
160457140187c5fb127b844e5a85f87f00a01b14Mon Sep 17 00:00:00 2001
From: Wanpeng Li <[email protected]>
Date: Tue, 4 May 2021 17:27:30 -0700
Subject: [PATCH] KVM: x86: Defer vtime accounting 'til after IRQ handlingDefer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on
PF_VCPUbeing set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence ofvcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest.This fixes a bug where reported guest time remains '0', even when running an infinite loop in the guest:
https://bugzilla.kernel.org/show_bug.cgi?id=209831
Fixes 87fa7f3e98a131 ("x86/kvm: Move context tracking where it belongs")Suggested-by Thomas Gleixner <[email protected]>Co-developed-by Sean Christopherson <[email protected]>Signed-off-by Wanpeng Li <[email protected]>Signed-off-by Sean Christopherson <[email protected]>Signed-off-by Thomas Gleixner <[email protected]>arch/x86/kvm/svm/svm.c +3
-3@@ -3753,15 +3753,15 @@ static noinstr void svm_vcpu_enter_exit(struct kvm_vcpu *vcpu)* have them in state 'on' as recorded before entering guest mode. * Same as enter_from_user_mode(). * -* guest_exit_irqoff() restores host context and reinstates RCU if -* enabled and required. +* context_tracking_guest_exit() restores host context and reinstates +* RCU if enabled and required. * * This needs to be done before the below as native_read_msr() * contains a tracepoint and x86_spec_ctrl_restore_host() calls * into world and some more. */ lockdep_hardirqs_off (CALLER_ADDR0 ); -guest_exit_irqoff (); +context_tracking_guest_exit ();instrumentation_begin ();trace_hardirqs_off_finish ();arch/x86/kvm/vmx/vmx.c +3
-3@@ -6703,15 +6703,15 @@ static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,* have them in state 'on' as recorded before entering guest mode. * Same as enter_from_user_mode(). * -* guest_exit_irqoff() restores host context and reinstates RCU if -* enabled and required. +* context_tracking_guest_exit() restores host context and reinstates +* RCU if enabled and required. * * This needs to be done before the below as native_read_msr() * contains a tracepoint and x86_spec_ctrl_restore_host() calls * into world and some more. */ lockdep_hardirqs_off (CALLER_ADDR0 ); -guest_exit_irqoff (); +context_tracking_guest_exit ();instrumentation_begin ();trace_hardirqs_off_finish ();arch/x86/kvm/x86.c +9
-0@@ -9315,6 +9315,15 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)local_irq_disable ();kvm_after_interrupt (vcpu); +/* +* Wait until after servicing IRQs to account guest time so that any +* ticks that occurred while running the guest are properly accounted +* to the guest. Waiting until IRQs are enabled degrades the accuracy +* of accounting via context tracking, but the loss of accuracy is +* acceptable for all known use cases. +*/ +vtime_account_guest_exit (); +if (lapic_in_kernel (vcpu)) {s64 delta = vcpu->arch.apic->lapic_timer.advance_expire_delta;if (delta !=S64_MIN ) {
Greg Kroah-Hartman
maintainerQuoted 8 lines · Jack Wang
Quoted 6 lines · <[email protected]> 于2021年5月14日周五 下午9:32写道:
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
Quoted 7 lines
If I first apply
866a6dadbb02("context_tracking: Move guest exit context tracking to separate helpers")
and88d8220bbf06("context_tracking: Move guest exit vtime accounting to separate helpers")then I can apply this commit cleanly to latest 5.10.y, I suppose it will work for 5.12.
That worked, thanks! Now queued up.
greg k-h
Sean Christopherson
maintainerQuoted 9 lines · Greg Kroah-Hartman
Quoted 8 lines · Jack Wang
Quoted 6 lines · <[email protected]> 于2021年5月14日周五 下午9:32写道:
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
Quoted 7 lines
Quoted 7 lines
If I first apply
866a6dadbb02("context_tracking: Move guest exit context tracking to separate helpers")
and88d8220bbf06("context_tracking: Move guest exit vtime accounting to separate helpers")then I can apply this commit cleanly to latest 5.10.y, I suppose it will work for 5.12.
Thanks much!
Quoted 1 line
That worked, thanks! Now queued up.
To not mess up in the future, I assume known dependencies should be tagged "Cc: stable...", even if the dependencies aren't technically bug fixes? The plan all along was that all three patches would have to be picked up, but apparently I thought that would happen automagically.
Greg Kroah-Hartman
maintainerQuoted 18 lines · Sean Christopherson
Quoted 9 lines · Greg Kroah-Hartman
Quoted 8 lines · Jack Wang
Quoted 6 lines · <[email protected]> 于2021年5月14日周五 下午9:32写道:
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.Quoted 7 lines
Quoted 7 lines
If I first apply
866a6dadbb02("context_tracking: Move guest exit context tracking to separate helpers")
and88d8220bbf06("context_tracking: Move guest exit vtime accounting to separate helpers")then I can apply this commit cleanly to latest 5.10.y, I suppose it will work for 5.12.
Quoted 6 lines
Thanks much!
Quoted 1 line
That worked, thanks! Now queued up.
To not mess up in the future, I assume known dependencies should be tagged "Cc: stable...", even if the dependencies aren't technically bug fixes?
Yes, the documentation shows also how to do this semi-automatically:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html