ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()
PATCH 1/1 ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()
After calling clk_prepare_enable(), clk_disable_unprepare() need be called when calling clk_set_rate() failed.
--- sound/soc/hisilicon/hi6210-i2s.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
sound/soc/hisilicon/hi6210-i2s.c +8 -6
@@ -102,18 +102,15 @@ static int hi6210_i2s_startup(struct snd_pcm_substream *substream,for (n =0 ; n < i2s->clocks; n++) { ret =clk_prepare_enable (i2s->clk[n]); -if (ret) { -while (n--) -clk_disable_unprepare (i2s->clk[n]); -return ret; - } +if (ret) + goto err_unprepare_clk; } ret =clk_set_rate (i2s->clk[CLK_I2S_BASE ],49152000 );if (ret) {dev_err (i2s->dev,"%s: setting 49.152MHz base rate failed %d\n" , __func__, ret); -return ret; + goto err_unprepare_clk; }/* enable clock before frequency division */
@@ -165,6 +162,11 @@ static int hi6210_i2s_startup(struct snd_pcm_substream *substream,hi6210_write_reg (i2s,HII2S_SW_RST_N , val);return 0 ; + +err_unprepare_clk: +while (n--) +clk_disable_unprepare (i2s->clk[n]); +return ret; } static void hi6210_i2s_shutdown(struct snd_pcm_substream *substream,
Signature · 1 line
2.25.1
Mark Brown
maintainerQuoted 2 lines · Yang Yingliang
After calling
clk_prepare_enable(),clk_disable_unprepare()need be called when callingclk_set_rate()failed.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()
commit: 375904e3931955fcf0a847f029b2492a117efc43
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark