arm64: dts: qcom: enable SM8350
cover arm64: dts: qcom: enable SM8350
Add IPA-related information to "sm8350.dtsi", and enable IPA for the SM8350 MTP platform.
-Alex
Alex Elder (2):
arm64: dts: qcom: sm8350: add IPA information
arm64: dts: qcom: sm8350-mtp: enable IPA
arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 6 +++ arch/arm64/boot/dts/qcom/sm8350.dtsi | 51 +++++++++++++++++++++++++ 2 files changed, 57 insertions(+)
Signature · 1 line
2.27.0
PATCH 1/2 arm64: dts: qcom: sm8350: add IPA information
Add IPA-related nodes and definitions to "sm8350.dtsi", which uses IPA v4.9.
--- arch/arm64/boot/dts/qcom/sm8350.dtsi | 51 ++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
arch/arm64/boot/dts/qcom/sm8350.dtsi +51 -0
@@ -11,6 +11,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/interconnect/qcom,sm8350.h> / { interrupt-parent = <&intc>;
@@ -391,6 +392,17 @@ smp2p_modem_in: slave-kernel { interrupt-controller; #interrupt-cells = <2>; }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; }; smp2p-slpi {
@@ -629,6 +641,45 @@ compute_noc: interconnect@a0c0000{ qcom,bcm-voters = <&apps_bcm_voter>; }; + ipa: ipa@1e40000 { + compatible = "qcom,sm8350-ipa"; + + iommus = <&apps_smmu 0x5c0 0x0>, + <&apps_smmu 0x5c2 0x0>; + reg = <0 0x1e40000 0 0x8000>, + <0 0x1e50000 0 0x4b20>, + <0 0x1e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA &gem_noc SLAVE_LLCC>, + <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnect-names = "ipa_to_llcc", + "llcc_to_ebi1", + "appss_to_ipa"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>;
Signature · 1 line
2.27.0
PATCH 2/2 arm64: dts: qcom: sm8350-mtp: enable IPA
In reply to Alex ElderEnable IPA for the SM8350 MTP.
--- arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/boot/dts/qcom/sm8350-mtp.dts +6 -0
@@ -364,3 +364,9 @@ &usb_2_qmpphy { vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l5b_0p88>; }; + +&ipa { + status = "okay"; + + memory-region = <&pil_ipa_fw_mem>; +};
Signature · 1 line
2.27.0
This series was applied to qcom/linux.git (refs/heads/for-next):
Hello:
This series was applied to qcom/linux.git (refs/heads/for-next):
Quoted 10 lines · On Tue, 13 Apr 2021 12:05:51 -0500 you wrote:
Add IPA-related information to "
sm8350.dtsi", and enable IPA for the SM8350 MTP platform.-Alex
Alex Elder (2):
arm64: dts: qcom: sm8350: add IPA information
arm64: dts: qcom: sm8350-mtp: enable IPA[...]
Here is the summary with links:
- [net-next,1/2] arm64: dts: qcom: sm8350: add IPA information
https://git.kernel.org/qcom/c/f11d3e7da32e - [net-next,2/2] arm64: dts: qcom: sm8350-mtp: enable IPA https://git.kernel.org/qcom/c/adfea97e4929
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html