Skip to contentSkip to conversation

FAILED: patch "[PATCH] {net, RDMA}/mlx5: Fix override of log_max_qp by other device" failed to apply to 4.4-stable tree

PATCH [email protected] 1 participant 1 message May 30, 2021

Subsystems (5)
Network drivers Stable branch InfiniBand Mellanox mlx5 core +1 more subsystems
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3410fbcd47dc6479af4309febf760ccaa5efb472 Mon Sep 17 00:00:00 2001
From: Maor Gottlieb <[email protected]>
Date: Wed, 12 May 2021 13:52:27 +0300
Subject: [PATCH] {net, RDMA}/mlx5: Fix override of log_max_qp by other device

mlx5_core_dev holds pointer to static profile, hence when the log_max_qp of the profile is override by some device, then it effect all other mlx5 devices that share the same profile. Fix it by having a profile instance for every mlx5 device.

Fixes 883371c453b9 ("net/mlx5: Check FW limitations on log_max_qp before setting it")
Signed-off-by Maor Gottlieb <[email protected]>
Reviewed-by Mark Bloch <[email protected]>
Signed-off-by Saeed Mahameed <[email protected]>
drivers/infiniband/hw/mlx5/mr.c +2 -2
index 4388afeff251..9662cd39c7ff 100644
@@ -743,10 +743,10 @@ int mlx5_mr_cache_init(struct mlx5_ib_dev *dev)
 		ent->xlt = (1 << ent->order) * sizeof(struct mlx5_mtt) /
 			   MLX5_IB_UMR_OCTOWORD;
 		ent->access_mode = MLX5_MKC_ACCESS_MODE_MTT;
-		if ((dev->mdev->profile->mask & MLX5_PROF_MASK_MR_CACHE) &&
+		if ((dev->mdev->profile.mask & MLX5_PROF_MASK_MR_CACHE) &&
 		    !dev->is_rep && mlx5_core_is_pf(dev->mdev) &&
 		    mlx5_ib_can_load_pas_with_umr(dev, 0))
-			ent->limit = dev->mdev->profile->mr_cache[i].limit;
+			ent->limit = dev->mdev->profile.mr_cache[i].limit;
 		else
 			ent->limit = 0;
 		spin_lock_irq(&ent->lock);
drivers/net/ethernet/mellanox/mlx5/core/main.c +5 -6
index c114365eb126..a1d67bd7fb43 100644
@@ -503,7 +503,7 @@ static int handle_hca_cap_odp(struct mlx5_core_dev *dev, void *set_ctx)
 
 static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 {
-	struct mlx5_profile *prof = dev->profile;
+	struct mlx5_profile *prof = &dev->profile;
 	void *set_hca_cap;
 	int err;
 

@@ -524,11 +524,11 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 		 to_fw_pkey_sz(dev, 128));
 
 	/* Check log_max_qp from HCA caps to set in current profile */
-	if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < profile[prof_sel].log_max_qp) {
+	if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < prof->log_max_qp) {
 		mlx5_core_warn(dev, "log_max_qp value in current profile is %d, changing it to HCA capability limit (%d)\n",
-			       profile[prof_sel].log_max_qp,
+			       prof->log_max_qp,
 			       MLX5_CAP_GEN_MAX(dev, log_max_qp));
-		profile[prof_sel].log_max_qp = MLX5_CAP_GEN_MAX(dev, log_max_qp);
+		prof->log_max_qp = MLX5_CAP_GEN_MAX(dev, log_max_qp);
 	}
 	if (prof->mask & MLX5_PROF_MASK_QP_SIZE)
 		MLX5_SET(cmd_hca_cap, set_hca_cap, log_max_qp,

@@ -1381,8 +1381,7 @@ int mlx5_mdev_init(struct mlx5_core_dev *dev, int profile_idx)
 	struct mlx5_priv *priv = &dev->priv;
 	int err;
 
-	dev->profile = &profile[profile_idx];
-
+	memcpy(&dev->profile, &profile[profile_idx], sizeof(dev->profile));
 	INIT_LIST_HEAD(&priv->ctx_list);
 	spin_lock_init(&priv->ctx_lock);
 	mutex_init(&dev->intf_state_mutex);
include/linux/mlx5/driver.h +22 -22

68 lines not on this page · raw message