enable ISH DMA on EHL platform
Subsystems (2)
cover enable ISH DMA on EHL platform
These patch set are used for enabling ISH DMA on EHL platform.
During ISH DMA enabling, some platforms (such as EHL) don't support cache snooping, bus driver (ishtp) has to involve a new callback, dma_no_cache_snooping(), in hardware layer (ipc) to get hardware DMA capability.
When do cache flush, clflush_cache_range() API is used on X86 which isn't supported by all other archs (such as ARM). Considering ISH only exists on Intel platforms, adding ISH depending on X86 in Kconfig to avoid build warnings or errors on other archs.
Even Xu (3):
hid: intel-ish-hid: Set ISH driver depends on x86
hid: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
hid: intel-ish-hid: ipc: Specify that EHL no cache snooping
drivers/hid/intel-ish-hid/Kconfig | 1 + drivers/hid/intel-ish-hid/ipc/ipc.c | 26 +++++++++++++++++++++++++- drivers/hid/intel-ish-hid/ishtp/client.c | 18 ++++++++++++++++++ drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h | 1 + 4 files changed, 45 insertions(+), 1 deletion(-)
Signature · 1 line
2.7.4
PATCH 1/3 hid: intel-ish-hid: Set ISH driver depends on x86
During ISH DMA enabling, some platforms (such as EHL) don't support cache snooping, driver needs involve clflush_cache_range API which isn't supported by all archs (such as ARM).
Considering ISH only exists on Intel platforms, add the dependence in Kconfig to avoid build warnings or errors on other archs.
--- drivers/hid/intel-ish-hid/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/hid/intel-ish-hid/Kconfig +1 -0
@@ -5,6 +5,7 @@ menu "Intel ISH HID support" config INTEL_ISH_HID tristate "Intel Integrated Sensor Hub" default n + depends on X86 select HID help The Integrated Sensor Hub (ISH) enables the ability to offload
Signature · 1 line
2.7.4
PATCH 2/3 hid: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
In reply to Even XuDifferent platforms have different DMA capability, on most of platforms, DMA support cache snooping. But few platforms, such as ElkhartLake (EHL), don't support cache snooping which requires cache flush from driver.
So add a hardware level callback to let ishtp driver know if cache flush is needed.
As most of platform support cache snooping, so driver will not do cache flush by default, until platform implements this callback and return true explicitly.
--- drivers/hid/intel-ish-hid/ishtp/client.c | 18 ++++++++++++++++++ drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h | 1 + 2 files changed, 19 insertions(+)
drivers/hid/intel-ish-hid/ishtp/client.c +18 -0
@@ -10,6 +10,7 @@#include <linux/wait.h> #include <linux/delay.h> #include <linux/dma-mapping.h> +#include <asm/cacheflush.h> #include "hbm.h" #include "client.h"
@@ -773,6 +774,14 @@ static void ishtp_cl_send_msg_dma(struct ishtp_device *dev,/* write msg to dma buf */ memcpy (msg_addr, cl_msg->send_buf.data, cl_msg->send_buf.size); +/* +* if current fw don't support cache snooping, driver have to +* flush the cache manually. +*/ +if (dev->ops->dma_no_cache_snooping && + dev->ops->dma_no_cache_snooping (dev)) +clflush_cache_range (msg_addr, cl_msg->send_buf.size); +/* send dma_xfer hbm msg */ off = msg_addr - (unsigned char *)dev->ishtp_host_dma_tx_buf;ishtp_hbm_hdr (&hdr,sizeof (struct dma_xfer_hbm ));
@@ -997,6 +1006,15 @@ void recv_ishtp_cl_msg_dma(struct ishtp_device *dev, void *msg, } buffer = rb->buffer.data; + +/* +* if current fw don't support cache snooping, driver have to +* flush the cache manually. +*/ +if (dev->ops->dma_no_cache_snooping && + dev->ops->dma_no_cache_snooping (dev)) +clflush_cache_range (msg, hbm->msg_length); +memcpy (buffer, msg, hbm->msg_length); rb->buf_idx = hbm->msg_length;
drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h +1 -0
@@ -118,6 +118,7 @@ struct ishtp_hw_ops { unsigned long buffer_length);uint32_t (*get_fw_status)(struct ishtp_device *dev);void (*sync_fw_clock)(struct ishtp_device *dev); +bool (*dma_no_cache_snooping)(struct ishtp_device *dev); };/**
Signature · 1 line
2.7.4
PATCH 3/3 hid: intel-ish-hid: ipc: Specify that EHL no cache snooping
In reply to Even XuSpecify that EHL doesn't support DMA cache snooping.
--- drivers/hid/intel-ish-hid/ipc/ipc.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)
drivers/hid/intel-ish-hid/ipc/ipc.c +25 -1
@@ -889,6 +889,29 @@ static uint32_t ish_ipc_get_header(struct ishtp_device *dev, int length,return drbl_val; } +/** +* _dma_no_cache_snooping() +* +* Check on current platform, DMA supports cache snooping or not. +* This callback is used to notify uplayer driver if manully cache +* flush is needed when do DMA operation. +* +* Please pay attention to this callback implementation, if declare +* having cache snooping on a cache snooping not supported platform +* will cause uplayer driver receiving mismatched data; and if +* declare no cache snooping on a cache snooping supported platform +* will cause cache be flushed twice and performance hit. +* +* @dev: ishtp device pointer +* +* Return: false - has cache snooping capability +* true - no cache snooping, need manually cache flush +*/ +static bool _dma_no_cache_snooping (struct ishtp_device *dev) +{ +return dev->pdev->device == EHL_Ax_DEVICE_ID; +} +static const struct ishtp_hw_ops ish_hw_ops = { .hw_reset = _ish_hw_reset, .ipc_reset = _ish_ipc_reset,
@@ -897,7 +920,8 @@ static const struct ishtp_hw_ops ish_hw_ops = { .write = write_ipc_to_queue, .get_fw_status = _ish_read_fw_sts_reg, .sync_fw_clock = _ish_sync_fw_clock, - .ishtp_read_hdr = _ishtp_read_hdr + .ishtp_read_hdr = _ishtp_read_hdr, + .dma_no_cache_snooping = _dma_no_cache_snooping };/**
Signature · 1 line
2.7.4
Jiri Kosina
maintainerQuoted 18 lines · Even Xu
These patch set are used for enabling ISH DMA on EHL platform.
During ISH DMA enabling, some platforms (such as EHL) don't support cache snooping, bus driver (ishtp) has to involve a new callback,
dma_no_cache_snooping(), in hardware layer (ipc) to get hardware DMA capability.When do cache flush,
clflush_cache_range()API is used on X86 which isn't supported by all other archs (such as ARM). Considering ISH only exists on Intel platforms, adding ISH depending on X86 inKconfigto avoid build warnings or errors on other archs.Even Xu (3):
hid: intel-ish-hid: Set ISH driver depends on x86
hid: intel-ish-hid: ishtp: Adddma_no_cache_snooping()callback
hid: intel-ish-hid: ipc: Specify that EHL no cache snooping
Quoted 5 lines
drivers/hid/intel-ish-hid/Kconfig | 1 + drivers/hid/intel-ish-hid/ipc/ipc.c | 26 +++++++++++++++++++++++++- drivers/hid/intel-ish-hid/ishtp/client.c | 18 ++++++++++++++++++ drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h | 1 + 4 files changed, 45 insertions(+), 1 deletion(-)
Now queued in for-5.14/intel-ish, thanks.
Signature · 2 lines
Jiri Kosina SUSE Labs
Got it, Thanks Jiri!
Best Regards,
Even Xu
-----Original Message-----
From: Jiri Kosina <[email protected]>
Sent: Monday, June 14, 2021 9:56 PM
To: Xu, Even <[email protected]>
Cc: [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH 0/3] enable ISH DMA on EHL platform
Quoted 17 lines · Even Xu
These patch set are used for enabling ISH DMA on EHL platform.
During ISH DMA enabling, some platforms (such as EHL) don't support cache snooping, bus driver (ishtp) has to involve a new callback,
dma_no_cache_snooping(), in hardware layer (ipc) to get hardware DMA capability.When do cache flush,
clflush_cache_range()API is used on X86 which isn't supported by all other archs (such as ARM). Considering ISH only exists on Intel platforms, adding ISH depending on X86 inKconfigto avoid build warnings or errors on other archs.Even Xu (3):
hid: intel-ish-hid: Set ISH driver depends on x86
hid: intel-ish-hid: ishtp: Adddma_no_cache_snooping()callback
hid: intel-ish-hid: ipc: Specify that EHL no cache snooping
Quoted 5 lines
drivers/hid/intel-ish-hid/Kconfig | 1 + drivers/hid/intel-ish-hid/ipc/ipc.c | 26 +++++++++++++++++++++++++- drivers/hid/intel-ish-hid/ishtp/client.c | 18 ++++++++++++++++++ drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h | 1 + 4 files changed, 45 insertions(+), 1 deletion(-)
Now queued in for-5.14/intel-ish, thanks.
--
Jiri Kosina
SUSE Labs