virtio-net: support xdp socket zero copy
Subsystems (6)
Xuan Zhuo
reviewerv5 cover virtio-net: support xdp socket zero copy
XDP socket is an excellent by pass kernel network transmission framework. The zero copy feature of xsk (XDP socket) needs to be supported by the driver. The performance of zero copy is very good. mlx5 and intel ixgbe already support this feature, This patch set allows virtio-net to support xsk's zerocopy xmit feature.
Compared with other drivers, the trouble with virtio-net is that when we bind the channel to xsk, we cannot directly disable/enable the channel. So we have to consider the buf that has been placed in the vq after the xsk is released by the upper layer.
My solution is to add a ctx to each buf placed in vq to record the page used, and add a reference to the page. So when the upper xsk is released, these pages are still safe in vq. We will process these bufs when we recycle buf or receive new data.
In the case of rx, it will be more complicated, because we may encounter the buf of xsk, or it may be a normal buf. Especially in the case of merge, we may receive multiple bufs, and these bufs may be xsk buf and normal are mixed together.
v5:
support rx
v4:
1. add priv_flags IFF_NOT_USE_DMA_ADDR
2. more reasonable patch split
Xuan Zhuo (15):
netdevice: priv_flags extend to 64bit
netdevice: add priv_flags IFF_NOT_USE_DMA_ADDR
virtio-net: add priv_flags IFF_NOT_USE_DMA_ADDR
xsk: XDP_SETUP_XSK_POOL support option IFF_NOT_USE_DMA_ADDR
virtio: support virtqueue_detach_unused_buf_ctx
virtio-net: unify the code for recycling the xmit ptr
virtio-net: standalone virtnet_aloc_frag function
virtio-net: split the receive_mergeable function
virtio-net: virtnet_poll_tx support budget check
virtio-net: independent directory
virtio-net: move to virtio_net.h
virtio-net: support AF_XDP zc tx
virtio-net: support AF_XDP zc rx
virtio-net: xsk direct xmit inside xsk wakeup
virtio-net: xsk zero copy xmit kick by threshold
MAINTAINERS | 2 +-
drivers/net/Kconfig | 8 +-
drivers/net/Makefile | 2 +-
drivers/net/virtio/Kconfig | 11 +
drivers/net/virtio/Makefile | 7 +
drivers/net/{ => virtio}/virtio_net.c | 670 +++++++++++-----------
drivers/net/virtio/virtio_net.h | 288 ++++++++++
drivers/net/virtio/xsk.c | 766 ++++++++++++++++++++++++++
drivers/net/virtio/xsk.h | 176 ++++++
drivers/virtio/virtio_ring.c | 22 +-
include/linux/netdevice.h | 143 ++---
include/linux/virtio.h | 2 +
net/8021q/vlanproc.c | 2 +-
net/xdp/xsk_buff_pool.c | 2 +-
14 files changed, 1664 insertions(+), 437 deletions(-)
create mode 100644 drivers/net/virtio/Kconfig
create mode 100644 drivers/net/virtio/Makefile
rename drivers/net/{ => virtio}/virtio_net.c (92%)
create mode 100644 drivers/net/virtio/virtio_net.h
create mode 100644 drivers/net/virtio/xsk.c
create mode 100644 drivers/net/virtio/xsk.h--
2.31.0
Xuan Zhuo
reviewerPATCH v5 1/15 netdevice: priv_flags extend to 64bit
The size of priv_flags is 32 bits, and the number of flags currently available has reached 32. It is time to expand the size of priv_flags to 64 bits.
Here the priv_flags is modified to 8 bytes, but the size of struct net_device has not changed, it is still 2176 bytes. It is because _tx is aligned based on the cache line. But there is a 4-byte hole left here.
Since the fields before and after priv_flags are read mostly, I did not adjust the order of the fields here.
--- include/linux/netdevice.h | 140 ++++++++++++++++++++------------------ net/8021q/vlanproc.c | 2 +- 2 files changed, 73 insertions(+), 69 deletions(-)
include/linux/netdevice.h +72 -68
@@ -1549,9 +1549,9 @@ struct net_device_ops { struct net_device_path *path); }; +typedef u64 netdev_priv_flags_t ; +/** -* enum netdev_priv_flags - &struct net_device priv_flags -* * These are the &struct net_device, they are only set internally * by drivers and used in the kernel. These flags are invisible to * userspace; this means that the order of these flags can change
@@ -1597,73 +1597,76 @@ struct net_device_ops {* @IFF_TX_SKB_NO_LINEAR: device/driver is capable of xmitting frames with * skb_headlen(skb) == 0 (data starts from frag0) */ -enum netdev_priv_flags { -IFF_802_1Q_VLAN =1 <<0 , -IFF_EBRIDGE =1 <<1 , -IFF_BONDING =1 <<2 , -IFF_ISATAP =1 <<3 , -IFF_WAN_HDLC =1 <<4 , -IFF_XMIT_DST_RELEASE =1 <<5 , -IFF_DONT_BRIDGE =1 <<6 , -IFF_DISABLE_NETPOLL =1 <<7 , -IFF_MACVLAN_PORT =1 <<8 , -IFF_BRIDGE_PORT =1 <<9 , -IFF_OVS_DATAPATH =1 <<10 , -IFF_TX_SKB_SHARING =1 <<11 , -IFF_UNICAST_FLT =1 <<12 , -IFF_TEAM_PORT =1 <<13 , -IFF_SUPP_NOFCS =1 <<14 , -IFF_LIVE_ADDR_CHANGE =1 <<15 , -IFF_MACVLAN =1 <<16 , -IFF_XMIT_DST_RELEASE_PERM =1 <<17 , -IFF_L3MDEV_MASTER =1 <<18 , -IFF_NO_QUEUE =1 <<19 , -IFF_OPENVSWITCH =1 <<20 , -IFF_L3MDEV_SLAVE =1 <<21 , -IFF_TEAM =1 <<22 , -IFF_RXFH_CONFIGURED =1 <<23 , -IFF_PHONY_HEADROOM =1 <<24 , -IFF_MACSEC =1 <<25 , -IFF_NO_RX_HANDLER =1 <<26 , -IFF_FAILOVER =1 <<27 , -IFF_FAILOVER_SLAVE =1 <<28 , -IFF_L3MDEV_RX_HANDLER =1 <<29 , -IFF_LIVE_RENAME_OK =1 <<30 , -IFF_TX_SKB_NO_LINEAR =1 <<31 , +enum { +IFF_802_1Q_VLAN_BIT , +IFF_EBRIDGE_BIT , +IFF_BONDING_BIT , +IFF_ISATAP_BIT , +IFF_WAN_HDLC_BIT , +IFF_XMIT_DST_RELEASE_BIT , +IFF_DONT_BRIDGE_BIT , +IFF_DISABLE_NETPOLL_BIT , +IFF_MACVLAN_PORT_BIT , +IFF_BRIDGE_PORT_BIT , +IFF_OVS_DATAPATH_BIT , +IFF_TX_SKB_SHARING_BIT , +IFF_UNICAST_FLT_BIT , +IFF_TEAM_PORT_BIT , +IFF_SUPP_NOFCS_BIT , +IFF_LIVE_ADDR_CHANGE_BIT , +IFF_MACVLAN_BIT , +IFF_XMIT_DST_RELEASE_PERM_BIT , +IFF_L3MDEV_MASTER_BIT , +IFF_NO_QUEUE_BIT , +IFF_OPENVSWITCH_BIT , +IFF_L3MDEV_SLAVE_BIT , +IFF_TEAM_BIT , +IFF_RXFH_CONFIGURED_BIT , +IFF_PHONY_HEADROOM_BIT , +IFF_MACSEC_BIT , +IFF_NO_RX_HANDLER_BIT , +IFF_FAILOVER_BIT , +IFF_FAILOVER_SLAVE_BIT , +IFF_L3MDEV_RX_HANDLER_BIT , +IFF_LIVE_RENAME_OK_BIT , +IFF_TX_SKB_NO_LINEAR_BIT , }; -#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN -#define IFF_EBRIDGE IFF_EBRIDGE -#define IFF_BONDING IFF_BONDING -#define IFF_ISATAP IFF_ISATAP -#define IFF_WAN_HDLC IFF_WAN_HDLC -#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE -#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE -#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL -#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT -#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT -#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH -#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING -#define IFF_UNICAST_FLT IFF_UNICAST_FLT -#define IFF_TEAM_PORT IFF_TEAM_PORT -#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS -#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE -#define IFF_MACVLAN IFF_MACVLAN -#define IFF_XMIT_DST_RELEASE_PERM IFF_XMIT_DST_RELEASE_PERM -#define IFF_L3MDEV_MASTER IFF_L3MDEV_MASTER -#define IFF_NO_QUEUE IFF_NO_QUEUE -#define IFF_OPENVSWITCH IFF_OPENVSWITCH -#define IFF_L3MDEV_SLAVE IFF_L3MDEV_SLAVE -#define IFF_TEAM IFF_TEAM -#define IFF_RXFH_CONFIGURED IFF_RXFH_CONFIGURED -#define IFF_PHONY_HEADROOM IFF_PHONY_HEADROOM -#define IFF_MACSEC IFF_MACSEC -#define IFF_NO_RX_HANDLER IFF_NO_RX_HANDLER -#define IFF_FAILOVER IFF_FAILOVER -#define IFF_FAILOVER_SLAVE IFF_FAILOVER_SLAVE -#define IFF_L3MDEV_RX_HANDLER IFF_L3MDEV_RX_HANDLER -#define IFF_LIVE_RENAME_OK IFF_LIVE_RENAME_OK -#define IFF_TX_SKB_NO_LINEAR IFF_TX_SKB_NO_LINEAR +#define __IFF_BIT (bit) ((netdev_priv_flags_t)1 << (bit)) +#define __IFF (name) __IFF_BIT(IFF_##name##_BIT) + +#define IFF_802_1Q_VLAN __IFF(802_1Q_VLAN) +#define IFF_EBRIDGE __IFF(EBRIDGE) +#define IFF_BONDING __IFF(BONDING) +#define IFF_ISATAP __IFF(ISATAP) +#define IFF_WAN_HDLC __IFF(WAN_HDLC) +#define IFF_XMIT_DST_RELEASE __IFF(XMIT_DST_RELEASE) +#define IFF_DONT_BRIDGE __IFF(DONT_BRIDGE) +#define IFF_DISABLE_NETPOLL __IFF(DISABLE_NETPOLL) +#define IFF_MACVLAN_PORT __IFF(MACVLAN_PORT) +#define IFF_BRIDGE_PORT __IFF(BRIDGE_PORT) +#define IFF_OVS_DATAPATH __IFF(OVS_DATAPATH) +#define IFF_TX_SKB_SHARING __IFF(TX_SKB_SHARING) +#define IFF_UNICAST_FLT __IFF(UNICAST_FLT) +#define IFF_TEAM_PORT __IFF(TEAM_PORT) +#define IFF_SUPP_NOFCS __IFF(SUPP_NOFCS) +#define IFF_LIVE_ADDR_CHANGE __IFF(LIVE_ADDR_CHANGE) +#define IFF_MACVLAN __IFF(MACVLAN) +#define IFF_XMIT_DST_RELEASE_PERM __IFF(XMIT_DST_RELEASE_PERM) +#define IFF_L3MDEV_MASTER __IFF(L3MDEV_MASTER) +#define IFF_NO_QUEUE __IFF(NO_QUEUE) +#define IFF_OPENVSWITCH __IFF(OPENVSWITCH) +#define IFF_L3MDEV_SLAVE __IFF(L3MDEV_SLAVE) +#define IFF_TEAM __IFF(TEAM) +#define IFF_RXFH_CONFIGURED __IFF(RXFH_CONFIGURED) +#define IFF_PHONY_HEADROOM __IFF(PHONY_HEADROOM) +#define IFF_MACSEC __IFF(MACSEC) +#define IFF_NO_RX_HANDLER __IFF(NO_RX_HANDLER) +#define IFF_FAILOVER __IFF(FAILOVER) +#define IFF_FAILOVER_SLAVE __IFF(FAILOVER_SLAVE) +#define IFF_L3MDEV_RX_HANDLER __IFF(L3MDEV_RX_HANDLER) +#define IFF_LIVE_RENAME_OK __IFF(LIVE_RENAME_OK) +#define IFF_TX_SKB_NO_LINEAR __IFF(TX_SKB_NO_LINEAR)/* Specifies the type of the struct net_device::ml_priv pointer */ enum netdev_ml_priv_type {
@@ -1963,7 +1966,8 @@ struct net_device {/* Read-mostly cache-line for fast-path access */ unsigned int flags; -unsigned int priv_flags; +/* 4 byte hole */ +netdev_priv_flags_t priv_flags;const struct net_device_ops *netdev_ops;int ifindex;unsigned short gflags;
net/8021q/vlanproc.c +1 -1
@@ -252,7 +252,7 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset) stats =dev_get_stats (vlandev, &temp);seq_printf (seq, -"%s VID: %d REORDER_HDR: %i dev->priv_flags: %hx\n" , +"%s VID: %d REORDER_HDR: %i dev->priv_flags: %llx\n" , vlandev->name, vlan->vlan_id, (int )(vlan->flags &1 ), vlandev->priv_flags);
Signature · 1 line
2.31.0
Xuan Zhuo
reviewerPATCH v5 2/15 netdevice: add priv_flags IFF_NOT_USE_DMA_ADDR
In reply to Xuan ZhuoSome driver devices, such as virtio-net, do not directly use dma addr. For upper-level frameworks such as xdp socket, that need to be aware of this. So add a new priv_flag IFF_NOT_USE_DMA_ADDR.
--- include/linux/netdevice.h | 3 +++ 1 file changed, 3 insertions(+)
include/linux/netdevice.h +3 -0
@@ -1596,6 +1596,7 @@ typedef u64 netdev_priv_flags_t;* @IFF_LIVE_RENAME_OK: rename is allowed while device is up and running * @IFF_TX_SKB_NO_LINEAR: device/driver is capable of xmitting frames with * skb_headlen(skb) == 0 (data starts from frag0) +* @IFF_NOT_USE_DMA_ADDR: driver not use dma addr directly. such as virtio-net */ enum {IFF_802_1Q_VLAN_BIT ,
@@ -1630,6 +1631,7 @@ enum {IFF_L3MDEV_RX_HANDLER_BIT ,IFF_LIVE_RENAME_OK_BIT ,IFF_TX_SKB_NO_LINEAR_BIT , + IFF_NOT_USE_DMA_ADDR_BIT, };#define __IFF_BIT (bit) ((netdev_priv_flags_t)1 << (bit))
@@ -1667,6 +1669,7 @@ enum {#define IFF_L3MDEV_RX_HANDLER __IFF(L3MDEV_RX_HANDLER)#define IFF_LIVE_RENAME_OK __IFF(LIVE_RENAME_OK)#define IFF_TX_SKB_NO_LINEAR __IFF(TX_SKB_NO_LINEAR) +#define IFF_NOT_USE_DMA_ADDR __IFF(NOT_USE_DMA_ADDR)/* Specifies the type of the struct net_device::ml_priv pointer */ enum netdev_ml_priv_type {
Signature · 1 line
2.31.0
Xuan Zhuo
reviewerPATCH v5 3/15 virtio-net: add priv_flags IFF_NOT_USE_DMA_ADDR
In reply to Xuan Zhuovirtio-net not use dma addr directly. So add this priv_flags IFF_NOT_USE_DMA_ADDR.
--- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/virtio_net.c +1 -1
@@ -3064,7 +3064,7 @@ static int virtnet_probe(struct virtio_device *vdev)/* Set up network device as normal. */ dev->priv_flags |=IFF_UNICAST_FLT |IFF_LIVE_ADDR_CHANGE | -IFF_TX_SKB_NO_LINEAR ; +IFF_TX_SKB_NO_LINEAR |IFF_NOT_USE_DMA_ADDR ; dev->netdev_ops = &virtnet_netdev; dev->features =NETIF_F_HIGHDMA ;
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 03/15] virtio-net: add priv_flags IFF_NOT_USE_DMA_ADDR
Quoted 13 lines · Xuan Zhuo
virtio-net not use dma addr directly. So add this
priv_flagsIFF_NOT_USE_DMA_ADDR.Signed-off-by Xuan Zhuo <[email protected]>--- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/net/virtio_net.c +0
-0
drivers/net/virtio_net.c static int virtnet_probe(struct virtio_device *vdev) · line 3067
Quoted 5 lines
drivers/net/virtio_net.c +1
-1@@ -3064,7 +3064,7 @@ static int virtnet_probe(struct virtio_device *vdev)/* Set up network device as normal. */ dev->priv_flags |=IFF_UNICAST_FLT |IFF_LIVE_ADDR_CHANGE | -IFF_TX_SKB_NO_LINEAR ; +IFF_TX_SKB_NO_LINEAR |IFF_NOT_USE_DMA_ADDR ;
I wonder instead of doing trick like this, how about teach the virtio core to accept DMA address via sg?
Thanks
Quoted 3 lines
drivers/net/virtio_net.c +0
-0dev->netdev_ops = &virtnet_netdev; dev->features =NETIF_F_HIGHDMA ;
Xuan Zhuo
reviewerRe: [PATCH net-next v5 03/15] virtio-net: add priv_flags IFF_NOT_USE_DMA_ADDR
Quoted 16 lines · Jason Wang
Quoted 14 lines · Xuan Zhuo
virtio-net not use dma addr directly. So add this
priv_flagsIFF_NOT_USE_DMA_ADDR.Signed-off-by Xuan Zhuo <[email protected]>--- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/net/virtio_net.c +0
-0@@ -3064,7 +3064,7 @@ static int virtnet_probe(struct virtio_device *vdev)
Quoted 8 lines
drivers/net/virtio_net.c static int virtnet_probe(struct virtio_device *vdev) · line 3067
Quoted 4 lines
drivers/net/virtio_net.c +1
-1/* Set up network device as normal. */ dev->priv_flags |=IFF_UNICAST_FLT |IFF_LIVE_ADDR_CHANGE | -IFF_TX_SKB_NO_LINEAR ; +IFF_TX_SKB_NO_LINEAR |IFF_NOT_USE_DMA_ADDR ;I wonder instead of doing trick like this, how about teach the virtio core to accept DMA address via sg?
Ok, I will try to do this.
Thanks.
Quoted 8 lines
Thanks
Quoted 3 lines
drivers/net/virtio_net.c +0
-0dev->netdev_ops = &virtnet_netdev; dev->features =NETIF_F_HIGHDMA ;
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Xuan Zhuo
reviewerPATCH v5 4/15 xsk: XDP_SETUP_XSK_POOL support option IFF_NOT_USE_DMA_ADDR
In reply to Xuan ZhuoSome devices, such as virtio-net, do not directly use dma addr. These devices do not initialize dma after completing the xsk setup, so the dma check is skipped here.
--- net/xdp/xsk_buff_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/xdp/xsk_buff_pool.c +1 -1
@@ -171,7 +171,7 @@ int xp_assign_dev(struct xsk_buff_pool *pool,if (err) goto err_unreg_pool; -if (!pool->dma_pages) { +if (!(netdev->priv_flags &IFF_NOT_USE_DMA_ADDR ) && !pool->dma_pages) {WARN (1 ,"Driver did not DMA map zero-copy buffers" ); err = -EINVAL ; goto err_unreg_xsk;
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Xuan Zhuo
reviewerPATCH v5 5/15 virtio: support virtqueue_detach_unused_buf_ctx
In reply to Xuan ZhuoSupports returning ctx while recycling unused buf, which helps to release buf in different ways for different bufs.
--- drivers/virtio/virtio_ring.c | 22 +++++++++++++++------- include/linux/virtio.h | 2 ++ 2 files changed, 17 insertions(+), 7 deletions(-)
drivers/virtio/virtio_ring.c +15 -7
@@ -815,7 +815,8 @@ static bool virtqueue_enable_cb_delayed_split(struct virtqueue *_vq)return true; } -static void *virtqueue_detach_unused_buf_split (struct virtqueue *_vq) +static void *virtqueue_detach_unused_buf_ctx_split (struct virtqueue *_vq, +void **ctx) {struct vring_virtqueue *vq =to_vvq (_vq);unsigned int i;
@@ -828,7 +829,7 @@ static void *virtqueue_detach_unused_buf_split(struct virtqueue *_vq)continue ;/* detach_buf_split clears data, so grab it now. */ buf = vq->split.desc_state[i].data; -detach_buf_split (vq, i,NULL ); +detach_buf_split (vq, i, ctx); vq->split.avail_idx_shadow--; vq->split.vring.avail->idx =cpu_to_virtio16 (_vq->vdev, vq->split.avail_idx_shadow);
@@ -1526,7 +1527,8 @@ static bool virtqueue_enable_cb_delayed_packed(struct virtqueue *_vq)return true; } -static void *virtqueue_detach_unused_buf_packed (struct virtqueue *_vq) +static void *virtqueue_detach_unused_buf_ctx_packed (struct virtqueue *_vq, +void **ctx) {struct vring_virtqueue *vq =to_vvq (_vq);unsigned int i;
@@ -1539,7 +1541,7 @@ static void *virtqueue_detach_unused_buf_packed(struct virtqueue *_vq)continue ;/* detach_buf clears data, so grab it now. */ buf = vq->packed.desc_state[i].data; -detach_buf_packed (vq, i,NULL ); +detach_buf_packed (vq, i, ctx);END_USE (vq);return buf; }
@@ -2018,12 +2020,18 @@ EXPORT_SYMBOL_GPL(virtqueue_enable_cb_delayed);* This is not valid on an active queue; it is useful only for device * shutdown. */ -void *virtqueue_detach_unused_buf (struct virtqueue *_vq) +void *virtqueue_detach_unused_buf_ctx (struct virtqueue *_vq,void **ctx) {struct vring_virtqueue *vq =to_vvq (_vq); -return vq->packed_ring ?virtqueue_detach_unused_buf_packed (_vq) : -virtqueue_detach_unused_buf_split (_vq); +return vq->packed_ring ? +virtqueue_detach_unused_buf_ctx_packed (_vq, ctx) : +virtqueue_detach_unused_buf_ctx_split (_vq, ctx); +} + +void *virtqueue_detach_unused_buf (struct virtqueue *_vq) +{ +return virtqueue_detach_unused_buf_ctx (_vq,NULL ); }EXPORT_SYMBOL_GPL (virtqueue_detach_unused_buf);
include/linux/virtio.h +2 -0
@@ -78,6 +78,8 @@ bool virtqueue_poll(struct virtqueue *vq, unsigned);bool virtqueue_enable_cb_delayed (struct virtqueue *vq); +void *virtqueue_detach_unused_buf_ctx (struct virtqueue *vq,void **ctx); +void *virtqueue_detach_unused_buf (struct virtqueue *vq);unsigned int virtqueue_get_vring_size (struct virtqueue *vq);
Signature · 1 line
2.31.0
kernel test robot
build botRe: [PATCH net-next v5 05/15] virtio: support virtqueue_detach_unused_buf_ctx
Thank you for the patch! Perhaps something to improve:
Hi Xuan,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on net-next/master]
url: https://github.com/0day-ci/linux/commits/Xuan-Zhuo/virtio-net-support-xdp-socket-zero-copy/20210617-033438 base: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git c7654495916e109f76a67fd3ae68f8fa70ab4faa config: parisc-randconfig-r023-20210617 (attached as .config) compiler: hppa-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/6155fdb771fa9f6c96472440c6b846dbfc4aebde
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Xuan-Zhuo/virtio-net-support-xdp-socket-zero-copy/20210617-033438 git checkout 6155fdb771fa9f6c96472440c6b846dbfc4aebde
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=parisc
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
drivers/virtio/virtio_ring.c:1898: warning: expecting prototype for virtqueue_get_buf(). Prototype was for virtqueue_get_buf_ctx() instead drivers/virtio/virtio_ring.c:2024: warning: Function parameter or member 'ctx' not described in 'virtqueue_detach_unused_buf_ctx'
>> drivers/virtio/virtio_ring.c:2024: warning: expecting prototype for virtqueue_detach_unused_buf(). Prototype was for virtqueue_detach_unused_buf_ctx() instead
vim +2024 drivers/virtio/virtio_ring.c
e6f633e5beab65 Tiwei Bie 2018-11-21 2014
138fd25148638a Tiwei Bie 2018-11-21 2015 /**
138fd25148638a Tiwei Bie 2018-11-21 2016 * virtqueue_detach_unused_buf - detach first unused buffer
a5581206c565a7 Jiang Biao 2019-04-23 2017 * @_vq: the struct virtqueue we're talking about.
138fd25148638a Tiwei Bie 2018-11-21 2018 *
138fd25148638a Tiwei Bie 2018-11-21 2019 * Returns NULL or the "data" token handed to virtqueue_add_*().
138fd25148638a Tiwei Bie 2018-11-21 2020 * This is not valid on an active queue; it is useful only for device
138fd25148638a Tiwei Bie 2018-11-21 2021 * shutdown.
138fd25148638a Tiwei Bie 2018-11-21 2022 */
6155fdb771fa9f Xuan Zhuo 2021-06-10 2023 void *virtqueue_detach_unused_buf_ctx(struct virtqueue *_vq, void **ctx)
138fd25148638a Tiwei Bie 2018-11-21 @2024 {
1ce9e6055fa0a9 Tiwei Bie 2018-11-21 2025 struct vring_virtqueue *vq = to_vvq(_vq);
1ce9e6055fa0a9 Tiwei Bie 2018-11-21 2026
6155fdb771fa9f Xuan Zhuo 2021-06-10 2027 return vq->packed_ring ?
6155fdb771fa9f Xuan Zhuo 2021-06-10 2028 virtqueue_detach_unused_buf_ctx_packed(_vq, ctx) :
6155fdb771fa9f Xuan Zhuo 2021-06-10 2029 virtqueue_detach_unused_buf_ctx_split(_vq, ctx);
6155fdb771fa9f Xuan Zhuo 2021-06-10 2030 }
6155fdb771fa9f Xuan Zhuo 2021-06-10 2031 ---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Xuan Zhuo
reviewerPATCH v5 6/15 virtio-net: unify the code for recycling the xmit ptr
In reply to Xuan ZhuoNow there are two types of "skb" and "xdp frame" during recycling old xmit.
There are two completely similar and independent implementations. This is inconvenient for the subsequent addition of new types. So extract a function from this piece of code and call this function uniformly to recover old xmit ptr.
Rename free_old_xmit_skbs() to free_old_xmit().
--- drivers/net/virtio_net.c | 86 ++++++++++++++++++---------------------- 1 file changed, 38 insertions(+), 48 deletions(-)
drivers/net/virtio_net.c +38 -48
@@ -264,6 +264,30 @@ static struct xdp_frame *ptr_to_xdp(void *ptr)return (struct xdp_frame *)((unsigned long )ptr & ~VIRTIO_XDP_FLAG ); } +static void __free_old_xmit (struct send_queue *sq,bool in_napi, +struct virtnet_sq_stats *stats) +{ +unsigned int len; +void *ptr; + +while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { +if (!is_xdp_frame (ptr)) { +struct sk_buff *skb = ptr; + +pr_debug ("Sent skb %p\n" , skb); + + stats->bytes += skb->len; +napi_consume_skb (skb, in_napi); + }else { +struct xdp_frame *frame =ptr_to_xdp (ptr); + + stats->bytes += frame->len; +xdp_return_frame (frame); + } + stats->packets++; + } +} +/* Converting between virtqueue no. and kernel tx/rx queue no. * 0:rx0 1:tx0 2:rx1 3:tx1 ... 2N:rxN 2N+1:txN 2N+2:cvq */
@@ -572,15 +596,12 @@ static int virtnet_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, u32 flags) { struct virtnet_info *vi = netdev_priv(dev); +struct virtnet_sq_stats stats = {};struct receive_queue *rq = vi->rq;struct bpf_prog *xdp_prog;struct send_queue *sq; -unsigned int len; -int packets =0 ; -int bytes =0 ;int nxmit =0 ;int kicks =0 ; -void *ptr;int ret;int i;
@@ -599,20 +620,7 @@ static int virtnet_xdp_xmit(struct net_device *dev, }/* Free up any pending old buffers before queueing new ones. */ -while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (likely (is_xdp_frame (ptr))) { -struct xdp_frame *frame =ptr_to_xdp (ptr); - - bytes += frame->len; -xdp_return_frame (frame); - }else { -struct sk_buff *skb = ptr; - - bytes += skb->len; -napi_consume_skb (skb, false); - } - packets++; - } +__free_old_xmit (sq, false, &stats);for (i =0 ; i < n; i++) {struct xdp_frame *xdpf = frames[i];
@@ -629,8 +637,8 @@ static int virtnet_xdp_xmit(struct net_device *dev, } out:u64_stats_update_begin (&sq->stats.syncp); - sq->stats.bytes += bytes; - sq->stats.packets += packets; + sq->stats.bytes += stats.bytes; + sq->stats.packets += stats.packets; sq->stats.xdp_tx += n; sq->stats.xdp_tx_drops += n - nxmit; sq->stats.kicks += kicks;
@@ -1459,39 +1467,21 @@ static int virtnet_receive(struct receive_queue *rq, int budget,return stats.packets; } -static void free_old_xmit_skbs (struct send_queue *sq,bool in_napi) +static void free_old_xmit (struct send_queue *sq,bool in_napi) { -unsigned int len; -unsigned int packets =0 ; -unsigned int bytes =0 ; -void *ptr; +struct virtnet_sq_stats stats = {}; -while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (likely (!is_xdp_frame (ptr))) { -struct sk_buff *skb = ptr; - -pr_debug ("Sent skb %p\n" , skb); - - bytes += skb->len; -napi_consume_skb (skb, in_napi); - }else { -struct xdp_frame *frame =ptr_to_xdp (ptr); - - bytes += frame->len; -xdp_return_frame (frame); - } - packets++; - } +__free_old_xmit (sq, in_napi, &stats);/* Avoid overhead when no packets have been processed * happens when called speculatively from start_xmit. */ -if (!packets) +if (!stats.packets)return ;u64_stats_update_begin (&sq->stats.syncp); - sq->stats.bytes += bytes; - sq->stats.packets += packets; + sq->stats.bytes += stats.bytes; + sq->stats.packets += stats.packets;u64_stats_update_end (&sq->stats.syncp); }
@@ -1516,7 +1506,7 @@ static void virtnet_poll_cleantx(struct receive_queue *rq)return ;if (__netif_tx_trylock (txq)) { -free_old_xmit_skbs (sq, true); +free_old_xmit (sq, true);__netif_tx_unlock (txq); }
@@ -1601,7 +1591,7 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget) txq =netdev_get_tx_queue (vi->dev, index);__netif_tx_lock (txq,raw_smp_processor_id ()); -free_old_xmit_skbs (sq, true); +free_old_xmit (sq, true);__netif_tx_unlock (txq);virtqueue_napi_complete (napi, sq->vq,0 );
@@ -1670,7 +1660,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)bool use_napi = sq->napi.weight;/* Free up any pending old buffers before queueing new ones. */ -free_old_xmit_skbs (sq, false); +free_old_xmit (sq, false);if (use_napi && kick)virtqueue_enable_cb_delayed (sq->vq);
@@ -1714,7 +1704,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)if (!use_napi &&unlikely (!virtqueue_enable_cb_delayed (sq->vq))) {/* More just got used, free them then recheck. */ -free_old_xmit_skbs (sq, false); +free_old_xmit (sq, false);if (sq->vq->num_free >=2 +MAX_SKB_FRAGS ) {netif_start_subqueue (dev, qnum);virtqueue_disable_cb (sq->vq);
Signature · 1 line
2.31.0
Re: [PATCH net-next v5 06/15] virtio-net: unify the code for recycling the xmit ptr
Quoted 11 lines · Xuan Zhuo
Now there are two types of "skb" and "xdp frame" during recycling old xmit.
There are two completely similar and independent implementations. This is inconvenient for the subsequent addition of new types. So extract a function from this piece of code and call this function uniformly to recover old xmit ptr.
Rename
free_old_xmit_skbs()tofree_old_xmit().Signed-off-by Xuan Zhuo <[email protected]>
Quoted 171 lines
--- drivers/net/virtio_net.c | 86 ++++++++++++++++++---------------------- 1 file changed, 38 insertions(+), 48 deletions(-)drivers/net/virtio_net.c +38
-48@@ -264,6 +264,30 @@ static struct xdp_frame *ptr_to_xdp(void *ptr)return (struct xdp_frame *)((unsigned long )ptr & ~VIRTIO_XDP_FLAG ); } +static void __free_old_xmit (struct send_queue *sq,bool in_napi, +struct virtnet_sq_stats *stats) +{ +unsigned int len; +void *ptr; + +while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { +if (!is_xdp_frame (ptr)) { +struct sk_buff *skb = ptr; + +pr_debug ("Sent skb %p\n" , skb); + + stats->bytes += skb->len; +napi_consume_skb (skb, in_napi); + }else { +struct xdp_frame *frame =ptr_to_xdp (ptr); + + stats->bytes += frame->len; +xdp_return_frame (frame); + } + stats->packets++; + } +} +/* Converting between virtqueue no. and kernel tx/rx queue no. * 0:rx0 1:tx0 2:rx1 3:tx1 ... 2N:rxN 2N+1:txN 2N+2:cvq */ @@ -572,15 +596,12 @@ static int virtnet_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, u32 flags) { struct virtnet_info *vi = netdev_priv(dev); +struct virtnet_sq_stats stats = {};struct receive_queue *rq = vi->rq;struct bpf_prog *xdp_prog;struct send_queue *sq; -unsigned int len; -int packets =0 ; -int bytes =0 ;int nxmit =0 ;int kicks =0 ; -void *ptr;int ret;int i;@@ -599,20 +620,7 @@ static int virtnet_xdp_xmit(struct net_device *dev, }/* Free up any pending old buffers before queueing new ones. */ -while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (likely (is_xdp_frame (ptr))) { -struct xdp_frame *frame =ptr_to_xdp (ptr); - - bytes += frame->len; -xdp_return_frame (frame); - }else { -struct sk_buff *skb = ptr; - - bytes += skb->len; -napi_consume_skb (skb, false); - } - packets++; - } +__free_old_xmit (sq, false, &stats);for (i =0 ; i < n; i++) {struct xdp_frame *xdpf = frames[i];@@ -629,8 +637,8 @@ static int virtnet_xdp_xmit(struct net_device *dev, } out:u64_stats_update_begin (&sq->stats.syncp); - sq->stats.bytes += bytes; - sq->stats.packets += packets; + sq->stats.bytes += stats.bytes; + sq->stats.packets += stats.packets; sq->stats.xdp_tx += n; sq->stats.xdp_tx_drops += n - nxmit; sq->stats.kicks += kicks;@@ -1459,39 +1467,21 @@ static int virtnet_receive(struct receive_queue *rq, int budget,return stats.packets; } -static void free_old_xmit_skbs (struct send_queue *sq,bool in_napi) +static void free_old_xmit (struct send_queue *sq,bool in_napi) { -unsigned int len; -unsigned int packets =0 ; -unsigned int bytes =0 ; -void *ptr; +struct virtnet_sq_stats stats = {}; -while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (likely (!is_xdp_frame (ptr))) { -struct sk_buff *skb = ptr; - -pr_debug ("Sent skb %p\n" , skb); - - bytes += skb->len; -napi_consume_skb (skb, in_napi); - }else { -struct xdp_frame *frame =ptr_to_xdp (ptr); - - bytes += frame->len; -xdp_return_frame (frame); - } - packets++; - } +__free_old_xmit (sq, in_napi, &stats);/* Avoid overhead when no packets have been processed * happens when called speculatively from start_xmit. */ -if (!packets) +if (!stats.packets)return ;u64_stats_update_begin (&sq->stats.syncp); - sq->stats.bytes += bytes; - sq->stats.packets += packets; + sq->stats.bytes += stats.bytes; + sq->stats.packets += stats.packets;u64_stats_update_end (&sq->stats.syncp); }@@ -1516,7 +1506,7 @@ static void virtnet_poll_cleantx(struct receive_queue *rq)return ;if (__netif_tx_trylock (txq)) { -free_old_xmit_skbs (sq, true); +free_old_xmit (sq, true);__netif_tx_unlock (txq); }@@ -1601,7 +1591,7 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget) txq =netdev_get_tx_queue (vi->dev, index);__netif_tx_lock (txq,raw_smp_processor_id ()); -free_old_xmit_skbs (sq, true); +free_old_xmit (sq, true);__netif_tx_unlock (txq);virtqueue_napi_complete (napi, sq->vq,0 );@@ -1670,7 +1660,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)bool use_napi = sq->napi.weight;/* Free up any pending old buffers before queueing new ones. */ -free_old_xmit_skbs (sq, false); +free_old_xmit (sq, false);if (use_napi && kick)virtqueue_enable_cb_delayed (sq->vq);@@ -1714,7 +1704,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)if (!use_napi &&unlikely (!virtqueue_enable_cb_delayed (sq->vq))) {/* More just got used, free them then recheck. */ -free_old_xmit_skbs (sq, false); +free_old_xmit (sq, false);if (sq->vq->num_free >=2 +MAX_SKB_FRAGS ) {netif_start_subqueue (dev, qnum);virtqueue_disable_cb (sq->vq);
Xuan Zhuo
reviewerPATCH v5 7/15 virtio-net: standalone virtnet_aloc_frag function
In reply to Xuan ZhuoThis logic is used by small and merge when adding buf, and the subsequent patch will also use this logic, so it is separated as an independent function.
--- drivers/net/virtio_net.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)
drivers/net/virtio_net.c +20 -9
@@ -264,6 +264,22 @@ static struct xdp_frame *ptr_to_xdp(void *ptr)return (struct xdp_frame *)((unsigned long )ptr & ~VIRTIO_XDP_FLAG ); } +static char *virtnet_alloc_frag (struct receive_queue *rq,unsigned int len, +int gfp) +{ +struct page_frag *alloc_frag = &rq->alloc_frag; +char *buf; + +if (unlikely (!skb_page_frag_refill (len, alloc_frag, gfp))) +return NULL ; + + buf = (char *)page_address (alloc_frag->page) + alloc_frag->offset; +get_page (alloc_frag->page); + alloc_frag->offset += len; + +return buf; +} +static void __free_old_xmit (struct send_queue *sq,bool in_napi,struct virtnet_sq_stats *stats) {
@@ -1190,7 +1206,6 @@ static void receive_buf(struct virtnet_info *vi, struct receive_queue *rq,static int add_recvbuf_small (struct virtnet_info *vi,struct receive_queue *rq,gfp_t gfp) { -struct page_frag *alloc_frag = &rq->alloc_frag;char *buf;unsigned int xdp_headroom =virtnet_get_headroom (vi);void *ctx = (void *)(unsigned long )xdp_headroom;
@@ -1199,12 +1214,10 @@ static int add_recvbuf_small(struct virtnet_info *vi, struct receive_queue *rq, len =SKB_DATA_ALIGN (len) +SKB_DATA_ALIGN (sizeof (struct skb_shared_info )); -if (unlikely (!skb_page_frag_refill (len, alloc_frag, gfp))) + buf =virtnet_alloc_frag (rq, len, gfp); +if (unlikely (!buf))return -ENOMEM ; - buf = (char *)page_address (alloc_frag->page) + alloc_frag->offset; -get_page (alloc_frag->page); - alloc_frag->offset += len;sg_init_one (rq->sg, buf +VIRTNET_RX_PAD + xdp_headroom, vi->hdr_len +GOOD_PACKET_LEN ); err =virtqueue_add_inbuf_ctx (rq->vq, rq->sg,1 , buf, ctx, gfp);
@@ -1295,13 +1308,11 @@ static int add_recvbuf_mergeable(struct virtnet_info *vi,* disabled GSO for XDP, it won't be a big issue. */ len =get_mergeable_buf_len (rq, &rq->mrg_avg_pkt_len, room); -if (unlikely (!skb_page_frag_refill (len + room, alloc_frag, gfp))) + buf =virtnet_alloc_frag (rq, len + room, gfp); +if (unlikely (!buf))return -ENOMEM ; - buf = (char *)page_address (alloc_frag->page) + alloc_frag->offset; buf += headroom;/* advance address leaving hole at front of pkt */ -get_page (alloc_frag->page); - alloc_frag->offset += len + room; hole = alloc_frag->size - alloc_frag->offset;if (hole < len + room) {/* To avoid internal fragmentation, if there is very likely not
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 07/15] virtio-net: standalone virtnet_aloc_frag function
Quoted 5 lines · Xuan Zhuo
This logic is used by small and merge when adding buf, and the subsequent patch will also use this logic, so it is separated as an independent function.
Signed-off-by Xuan Zhuo <[email protected]>
Quoted 70 lines
--- drivers/net/virtio_net.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)drivers/net/virtio_net.c +20
-9@@ -264,6 +264,22 @@ static struct xdp_frame *ptr_to_xdp(void *ptr)return (struct xdp_frame *)((unsigned long )ptr & ~VIRTIO_XDP_FLAG ); } +static char *virtnet_alloc_frag (struct receive_queue *rq,unsigned int len, +int gfp) +{ +struct page_frag *alloc_frag = &rq->alloc_frag; +char *buf; + +if (unlikely (!skb_page_frag_refill (len, alloc_frag, gfp))) +return NULL ; + + buf = (char *)page_address (alloc_frag->page) + alloc_frag->offset; +get_page (alloc_frag->page); + alloc_frag->offset += len; + +return buf; +} +static void __free_old_xmit (struct send_queue *sq,bool in_napi,struct virtnet_sq_stats *stats) {@@ -1190,7 +1206,6 @@ static void receive_buf(struct virtnet_info *vi, struct receive_queue *rq,static int add_recvbuf_small (struct virtnet_info *vi,struct receive_queue *rq,gfp_t gfp) { -struct page_frag *alloc_frag = &rq->alloc_frag;char *buf;unsigned int xdp_headroom =virtnet_get_headroom (vi);void *ctx = (void *)(unsigned long )xdp_headroom;@@ -1199,12 +1214,10 @@ static int add_recvbuf_small(struct virtnet_info *vi, struct receive_queue *rq, len =SKB_DATA_ALIGN (len) +SKB_DATA_ALIGN (sizeof (struct skb_shared_info )); -if (unlikely (!skb_page_frag_refill (len, alloc_frag, gfp))) + buf =virtnet_alloc_frag (rq, len, gfp); +if (unlikely (!buf))return -ENOMEM ; - buf = (char *)page_address (alloc_frag->page) + alloc_frag->offset; -get_page (alloc_frag->page); - alloc_frag->offset += len;sg_init_one (rq->sg, buf +VIRTNET_RX_PAD + xdp_headroom, vi->hdr_len +GOOD_PACKET_LEN ); err =virtqueue_add_inbuf_ctx (rq->vq, rq->sg,1 , buf, ctx, gfp);@@ -1295,13 +1308,11 @@ static int add_recvbuf_mergeable(struct virtnet_info *vi,* disabled GSO for XDP, it won't be a big issue. */ len =get_mergeable_buf_len (rq, &rq->mrg_avg_pkt_len, room); -if (unlikely (!skb_page_frag_refill (len + room, alloc_frag, gfp))) + buf =virtnet_alloc_frag (rq, len + room, gfp); +if (unlikely (!buf))return -ENOMEM ; - buf = (char *)page_address (alloc_frag->page) + alloc_frag->offset; buf += headroom;/* advance address leaving hole at front of pkt */ -get_page (alloc_frag->page); - alloc_frag->offset += len + room; hole = alloc_frag->size - alloc_frag->offset;if (hole < len + room) {/* To avoid internal fragmentation, if there is very likely not
Xuan Zhuo
reviewerPATCH v5 8/15 virtio-net: split the receive_mergeable function
In reply to Xuan Zhuoreceive_mergeable() is too complicated, so this function is split here. One is to make the function more readable. On the other hand, the two independent functions will be called separately in subsequent patches.
--- drivers/net/virtio_net.c | 181 ++++++++++++++++++++++++--------------- 1 file changed, 111 insertions(+), 70 deletions(-)
drivers/net/virtio_net.c +111 -70
@@ -733,6 +733,109 @@ static struct page *xdp_linearize_page(struct receive_queue *rq,return NULL ; } +static void merge_drop_follow_bufs (struct net_device *dev, +struct receive_queue *rq, +u16 num_buf, +struct virtnet_rq_stats *stats) +{ +struct page *page; +unsigned int len; +void *buf; + +while (num_buf-- >1 ) { + buf =virtqueue_get_buf (rq->vq, &len); +if (unlikely (!buf)) { +pr_debug ("%s: rx error: %d buffers missing\n" , + dev->name, num_buf); + dev->stats.rx_length_errors++; +break ; + } + stats->bytes += len; + page =virt_to_head_page (buf); +put_page (page); + } +} + +static struct sk_buff *merge_receive_follow_bufs (struct net_device *dev, +struct virtnet_info *vi, +struct receive_queue *rq, +struct sk_buff *head_skb, +u16 num_buf, +struct virtnet_rq_stats *stats) +{ +struct sk_buff *curr_skb; +unsigned int truesize; +unsigned int len, num; +struct page *page; +void *buf, *ctx; +int offset; + + curr_skb = head_skb; + num = num_buf; + +while (--num_buf) { +int num_skb_frags; + + buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx); +if (unlikely (!buf)) { +pr_debug ("%s: rx error: %d buffers out of %d missing\n" , + dev->name, num_buf, num); + dev->stats.rx_length_errors++; + goto err_buf; + } + + stats->bytes += len; + page =virt_to_head_page (buf); + + truesize =mergeable_ctx_to_truesize (ctx); +if (unlikely (len > truesize)) { +pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , + dev->name, len, (unsigned long )ctx); + dev->stats.rx_length_errors++; + goto err_skb; + } + + num_skb_frags =skb_shinfo (curr_skb)->nr_frags; +if (unlikely (num_skb_frags ==MAX_SKB_FRAGS )) { +struct sk_buff *nskb =alloc_skb (0 ,GFP_ATOMIC ); + +if (unlikely (!nskb)) + goto err_skb; +if (curr_skb == head_skb) +skb_shinfo (curr_skb)->frag_list = nskb; +else + curr_skb->next = nskb; + curr_skb = nskb; + head_skb->truesize += nskb->truesize; + num_skb_frags =0 ; + } +if (curr_skb != head_skb) { + head_skb->data_len += len; + head_skb->len += len; + head_skb->truesize += truesize; + } + offset = buf -page_address (page); +if (skb_can_coalesce (curr_skb, num_skb_frags, page, offset)) { +put_page (page); +skb_coalesce_rx_frag (curr_skb, num_skb_frags -1 , + len, truesize); + }else { +skb_add_rx_frag (curr_skb, num_skb_frags, page, + offset, len, truesize); + } + } + +return head_skb; + +err_skb: +put_page (page); +merge_drop_follow_bufs (dev, rq, num_buf, stats); +err_buf: + stats->drops++; +dev_kfree_skb (head_skb); +return NULL ; +} + static struct sk_buff *receive_small(struct net_device *dev, struct virtnet_info *vi, struct receive_queue *rq,
@@ -909,7 +1012,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,u16 num_buf =virtio16_to_cpu (vi->vdev, hdr->num_buffers);struct page *page =virt_to_head_page (buf);int offset = buf -page_address (page); -struct sk_buff *head_skb, *curr_skb; +struct sk_buff *head_skb;struct bpf_prog *xdp_prog;unsigned int truesize =mergeable_ctx_to_truesize (ctx);unsigned int headroom =mergeable_ctx_to_headroom (ctx);
@@ -1054,65 +1157,15 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, head_skb =page_to_skb (vi, rq, page, offset, len, truesize, !xdp_prog, metasize, !!headroom); - curr_skb = head_skb; - -if (unlikely (!curr_skb)) +if (unlikely (!head_skb)) goto err_skb; -while (--num_buf) { -int num_skb_frags; - buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx); -if (unlikely (!buf)) { -pr_debug ("%s: rx error: %d buffers out of %d missing\n" , - dev->name, num_buf, -virtio16_to_cpu (vi->vdev, - hdr->num_buffers)); - dev->stats.rx_length_errors++; - goto err_buf; - } - - stats->bytes += len; - page =virt_to_head_page (buf); - - truesize =mergeable_ctx_to_truesize (ctx); -if (unlikely (len > truesize)) { -pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , - dev->name, len, (unsigned long )ctx); - dev->stats.rx_length_errors++; - goto err_skb; - } - - num_skb_frags =skb_shinfo (curr_skb)->nr_frags; -if (unlikely (num_skb_frags ==MAX_SKB_FRAGS )) { -struct sk_buff *nskb =alloc_skb (0 ,GFP_ATOMIC ); - -if (unlikely (!nskb)) - goto err_skb; -if (curr_skb == head_skb) -skb_shinfo (curr_skb)->frag_list = nskb; -else - curr_skb->next = nskb; - curr_skb = nskb; - head_skb->truesize += nskb->truesize; - num_skb_frags =0 ; - } -if (curr_skb != head_skb) { - head_skb->data_len += len; - head_skb->len += len; - head_skb->truesize += truesize; - } - offset = buf -page_address (page); -if (skb_can_coalesce (curr_skb, num_skb_frags, page, offset)) { -put_page (page); -skb_coalesce_rx_frag (curr_skb, num_skb_frags -1 , - len, truesize); - }else { -skb_add_rx_frag (curr_skb, num_skb_frags, page, - offset, len, truesize); - } - } +if (num_buf >1 ) + head_skb =merge_receive_follow_bufs (dev, vi, rq, head_skb, + num_buf, stats); +if (head_skb) +ewma_pkt_len_add (&rq->mrg_avg_pkt_len, head_skb->len); -ewma_pkt_len_add (&rq->mrg_avg_pkt_len, head_skb->len);return head_skb; err_xdp:
@@ -1120,19 +1173,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, stats->xdp_drops++; err_skb:put_page (page); -while (num_buf-- >1 ) { - buf =virtqueue_get_buf (rq->vq, &len); -if (unlikely (!buf)) { -pr_debug ("%s: rx error: %d buffers missing\n" , - dev->name, num_buf); - dev->stats.rx_length_errors++; -break ; - } - stats->bytes += len; - page =virt_to_head_page (buf); -put_page (page); - } -err_buf: +merge_drop_follow_bufs (dev, rq, num_buf, stats); stats->drops++;dev_kfree_skb (head_skb); xdp_xmit:
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 08/15] virtio-net: split the receive_mergeable function
Quoted 14 lines · Xuan Zhuo
receive_mergeable()is too complicated, so this function is split here. One is to make the function more readable. On the other hand, the two independent functions will be called separately in subsequent patches.Signed-off-by Xuan Zhuo <[email protected]>--- drivers/net/virtio_net.c | 181 ++++++++++++++++++++++++--------------- 1 file changed, 111 insertions(+), 70 deletions(-)drivers/net/virtio_net.c +0
-0
drivers/net/virtio_net.c static struct page *xdp_linearize_page(struct receive_queue *rq, · line 739
Quoted 7 lines
drivers/net/virtio_net.c +4
-0@@ -733,6 +733,109 @@ static struct page *xdp_linearize_page(struct receive_queue *rq,return NULL ; } +static void merge_drop_follow_bufs (struct net_device *dev, +struct receive_queue *rq, +u16 num_buf, +struct virtnet_rq_stats *stats)
Patch looks good. Nit here, I guess we need a better name, how about "merge_buffers()" for this and "drop_buffers()" for the next function?
Thanks
Quoted 204 lines
drivers/net/virtio_net.c +107
-70+{ +struct page *page; +unsigned int len; +void *buf; + +while (num_buf-- >1 ) { + buf =virtqueue_get_buf (rq->vq, &len); +if (unlikely (!buf)) { +pr_debug ("%s: rx error: %d buffers missing\n" , + dev->name, num_buf); + dev->stats.rx_length_errors++; +break ; + } + stats->bytes += len; + page =virt_to_head_page (buf); +put_page (page); + } +} + +static struct sk_buff *merge_receive_follow_bufs (struct net_device *dev, +struct virtnet_info *vi, +struct receive_queue *rq, +struct sk_buff *head_skb, +u16 num_buf, +struct virtnet_rq_stats *stats) +{ +struct sk_buff *curr_skb; +unsigned int truesize; +unsigned int len, num; +struct page *page; +void *buf, *ctx; +int offset; + + curr_skb = head_skb; + num = num_buf; + +while (--num_buf) { +int num_skb_frags; + + buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx); +if (unlikely (!buf)) { +pr_debug ("%s: rx error: %d buffers out of %d missing\n" , + dev->name, num_buf, num); + dev->stats.rx_length_errors++; + goto err_buf; + } + + stats->bytes += len; + page =virt_to_head_page (buf); + + truesize =mergeable_ctx_to_truesize (ctx); +if (unlikely (len > truesize)) { +pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , + dev->name, len, (unsigned long )ctx); + dev->stats.rx_length_errors++; + goto err_skb; + } + + num_skb_frags =skb_shinfo (curr_skb)->nr_frags; +if (unlikely (num_skb_frags ==MAX_SKB_FRAGS )) { +struct sk_buff *nskb =alloc_skb (0 ,GFP_ATOMIC ); + +if (unlikely (!nskb)) + goto err_skb; +if (curr_skb == head_skb) +skb_shinfo (curr_skb)->frag_list = nskb; +else + curr_skb->next = nskb; + curr_skb = nskb; + head_skb->truesize += nskb->truesize; + num_skb_frags =0 ; + } +if (curr_skb != head_skb) { + head_skb->data_len += len; + head_skb->len += len; + head_skb->truesize += truesize; + } + offset = buf -page_address (page); +if (skb_can_coalesce (curr_skb, num_skb_frags, page, offset)) { +put_page (page); +skb_coalesce_rx_frag (curr_skb, num_skb_frags -1 , + len, truesize); + }else { +skb_add_rx_frag (curr_skb, num_skb_frags, page, + offset, len, truesize); + } + } + +return head_skb; + +err_skb: +put_page (page); +merge_drop_follow_bufs (dev, rq, num_buf, stats); +err_buf: + stats->drops++; +dev_kfree_skb (head_skb); +return NULL ; +} + static struct sk_buff *receive_small(struct net_device *dev, struct virtnet_info *vi, struct receive_queue *rq,@@ -909,7 +1012,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,u16 num_buf =virtio16_to_cpu (vi->vdev, hdr->num_buffers);struct page *page =virt_to_head_page (buf);int offset = buf -page_address (page); -struct sk_buff *head_skb, *curr_skb; +struct sk_buff *head_skb;struct bpf_prog *xdp_prog;unsigned int truesize =mergeable_ctx_to_truesize (ctx);unsigned int headroom =mergeable_ctx_to_headroom (ctx);@@ -1054,65 +1157,15 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, head_skb =page_to_skb (vi, rq, page, offset, len, truesize, !xdp_prog, metasize, !!headroom); - curr_skb = head_skb; - -if (unlikely (!curr_skb)) +if (unlikely (!head_skb)) goto err_skb; -while (--num_buf) { -int num_skb_frags; - buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx); -if (unlikely (!buf)) { -pr_debug ("%s: rx error: %d buffers out of %d missing\n" , - dev->name, num_buf, -virtio16_to_cpu (vi->vdev, - hdr->num_buffers)); - dev->stats.rx_length_errors++; - goto err_buf; - } - - stats->bytes += len; - page =virt_to_head_page (buf); - - truesize =mergeable_ctx_to_truesize (ctx); -if (unlikely (len > truesize)) { -pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , - dev->name, len, (unsigned long )ctx); - dev->stats.rx_length_errors++; - goto err_skb; - } - - num_skb_frags =skb_shinfo (curr_skb)->nr_frags; -if (unlikely (num_skb_frags ==MAX_SKB_FRAGS )) { -struct sk_buff *nskb =alloc_skb (0 ,GFP_ATOMIC ); - -if (unlikely (!nskb)) - goto err_skb; -if (curr_skb == head_skb) -skb_shinfo (curr_skb)->frag_list = nskb; -else - curr_skb->next = nskb; - curr_skb = nskb; - head_skb->truesize += nskb->truesize; - num_skb_frags =0 ; - } -if (curr_skb != head_skb) { - head_skb->data_len += len; - head_skb->len += len; - head_skb->truesize += truesize; - } - offset = buf -page_address (page); -if (skb_can_coalesce (curr_skb, num_skb_frags, page, offset)) { -put_page (page); -skb_coalesce_rx_frag (curr_skb, num_skb_frags -1 , - len, truesize); - }else { -skb_add_rx_frag (curr_skb, num_skb_frags, page, - offset, len, truesize); - } - } +if (num_buf >1 ) + head_skb =merge_receive_follow_bufs (dev, vi, rq, head_skb, + num_buf, stats); +if (head_skb) +ewma_pkt_len_add (&rq->mrg_avg_pkt_len, head_skb->len); -ewma_pkt_len_add (&rq->mrg_avg_pkt_len, head_skb->len);return head_skb; err_xdp:@@ -1120,19 +1173,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, stats->xdp_drops++; err_skb:put_page (page); -while (num_buf-- >1 ) { - buf =virtqueue_get_buf (rq->vq, &len); -if (unlikely (!buf)) { -pr_debug ("%s: rx error: %d buffers missing\n" , - dev->name, num_buf); - dev->stats.rx_length_errors++; -break ; - } - stats->bytes += len; - page =virt_to_head_page (buf); -put_page (page); - } -err_buf: +merge_drop_follow_bufs (dev, rq, num_buf, stats); stats->drops++;dev_kfree_skb (head_skb); xdp_xmit:
Xuan Zhuo
reviewerRe: [PATCH net-next v5 08/15] virtio-net: split the receive_mergeable function
Quoted 19 lines · Jason Wang
Quoted 17 lines · Xuan Zhuo
receive_mergeable()is too complicated, so this function is split here. One is to make the function more readable. On the other hand, the two independent functions will be called separately in subsequent patches.Signed-off-by Xuan Zhuo <[email protected]>--- drivers/net/virtio_net.c | 181 ++++++++++++++++++++++++--------------- 1 file changed, 111 insertions(+), 70 deletions(-)drivers/net/virtio_net.c +0
-0@@ -733,6 +733,109 @@ static struct page *xdp_linearize_page(struct receive_queue *rq,return NULL ; }
Quoted 8 lines
drivers/net/virtio_net.c static struct page *xdp_linearize_page(struct receive_queue *rq, · line 739
Quoted 4 lines
drivers/net/virtio_net.c +4
-0+static void merge_drop_follow_bufs (struct net_device *dev, +struct receive_queue *rq, +u16 num_buf, +struct virtnet_rq_stats *stats)Patch looks good. Nit here, I guess we need a better name, how about "
merge_buffers()" for this and "drop_buffers()" for the next function?
The name sounds good.
Thanks.
Quoted 200 lines
Thanks
Quoted 196 lines
drivers/net/virtio_net.c +106
-66+{ +struct page *page; +unsigned int len; +void *buf; + +while (num_buf-- >1 ) { + buf =virtqueue_get_buf (rq->vq, &len); +if (unlikely (!buf)) { +pr_debug ("%s: rx error: %d buffers missing\n" , + dev->name, num_buf); + dev->stats.rx_length_errors++; +break ; + } + stats->bytes += len; + page =virt_to_head_page (buf); +put_page (page); + } +} + +static struct sk_buff *merge_receive_follow_bufs (struct net_device *dev, +struct virtnet_info *vi, +struct receive_queue *rq, +struct sk_buff *head_skb, +u16 num_buf, +struct virtnet_rq_stats *stats) +{ +struct sk_buff *curr_skb; +unsigned int truesize; +unsigned int len, num; +struct page *page; +void *buf, *ctx; +int offset; + + curr_skb = head_skb; + num = num_buf; + +while (--num_buf) { +int num_skb_frags; + + buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx); +if (unlikely (!buf)) { +pr_debug ("%s: rx error: %d buffers out of %d missing\n" , + dev->name, num_buf, num); + dev->stats.rx_length_errors++; + goto err_buf; + } + + stats->bytes += len; + page =virt_to_head_page (buf); + + truesize =mergeable_ctx_to_truesize (ctx); +if (unlikely (len > truesize)) { +pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , + dev->name, len, (unsigned long )ctx); + dev->stats.rx_length_errors++; + goto err_skb; + } + + num_skb_frags =skb_shinfo (curr_skb)->nr_frags; +if (unlikely (num_skb_frags ==MAX_SKB_FRAGS )) { +struct sk_buff *nskb =alloc_skb (0 ,GFP_ATOMIC ); + +if (unlikely (!nskb)) + goto err_skb; +if (curr_skb == head_skb) +skb_shinfo (curr_skb)->frag_list = nskb; +else + curr_skb->next = nskb; + curr_skb = nskb; + head_skb->truesize += nskb->truesize; + num_skb_frags =0 ; + } +if (curr_skb != head_skb) { + head_skb->data_len += len; + head_skb->len += len; + head_skb->truesize += truesize; + } + offset = buf -page_address (page); +if (skb_can_coalesce (curr_skb, num_skb_frags, page, offset)) { +put_page (page); +skb_coalesce_rx_frag (curr_skb, num_skb_frags -1 , + len, truesize); + }else { +skb_add_rx_frag (curr_skb, num_skb_frags, page, + offset, len, truesize); + } + } + +return head_skb; + +err_skb: +put_page (page); +merge_drop_follow_bufs (dev, rq, num_buf, stats); +err_buf: + stats->drops++; +dev_kfree_skb (head_skb); +return NULL ; +} + static struct sk_buff *receive_small(struct net_device *dev, struct virtnet_info *vi, struct receive_queue *rq,@@ -909,7 +1012,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,u16 num_buf =virtio16_to_cpu (vi->vdev, hdr->num_buffers);struct page *page =virt_to_head_page (buf);int offset = buf -page_address (page); -struct sk_buff *head_skb, *curr_skb; +struct sk_buff *head_skb;struct bpf_prog *xdp_prog;unsigned int truesize =mergeable_ctx_to_truesize (ctx);unsigned int headroom =mergeable_ctx_to_headroom (ctx);@@ -1054,65 +1157,15 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, head_skb =page_to_skb (vi, rq, page, offset, len, truesize, !xdp_prog, metasize, !!headroom); - curr_skb = head_skb; - -if (unlikely (!curr_skb)) +if (unlikely (!head_skb)) goto err_skb; -while (--num_buf) { -int num_skb_frags; - buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx); -if (unlikely (!buf)) { -pr_debug ("%s: rx error: %d buffers out of %d missing\n" , - dev->name, num_buf, -virtio16_to_cpu (vi->vdev, - hdr->num_buffers)); - dev->stats.rx_length_errors++; - goto err_buf; - } - - stats->bytes += len; - page =virt_to_head_page (buf); - - truesize =mergeable_ctx_to_truesize (ctx); -if (unlikely (len > truesize)) { -pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , - dev->name, len, (unsigned long )ctx); - dev->stats.rx_length_errors++; - goto err_skb; - } - - num_skb_frags =skb_shinfo (curr_skb)->nr_frags; -if (unlikely (num_skb_frags ==MAX_SKB_FRAGS )) { -struct sk_buff *nskb =alloc_skb (0 ,GFP_ATOMIC ); - -if (unlikely (!nskb)) - goto err_skb; -if (curr_skb == head_skb) -skb_shinfo (curr_skb)->frag_list = nskb; -else - curr_skb->next = nskb; - curr_skb = nskb; - head_skb->truesize += nskb->truesize; - num_skb_frags =0 ; - } -if (curr_skb != head_skb) { - head_skb->data_len += len; - head_skb->len += len; - head_skb->truesize += truesize; - } - offset = buf -page_address (page); -if (skb_can_coalesce (curr_skb, num_skb_frags, page, offset)) { -put_page (page); -skb_coalesce_rx_frag (curr_skb, num_skb_frags -1 , - len, truesize); - }else { -skb_add_rx_frag (curr_skb, num_skb_frags, page, - offset, len, truesize); - } - } +if (num_buf >1 ) + head_skb =merge_receive_follow_bufs (dev, vi, rq, head_skb, + num_buf, stats); +if (head_skb) +ewma_pkt_len_add (&rq->mrg_avg_pkt_len, head_skb->len); -ewma_pkt_len_add (&rq->mrg_avg_pkt_len, head_skb->len);return head_skb; err_xdp:@@ -1120,19 +1173,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, stats->xdp_drops++; err_skb:put_page (page); -while (num_buf-- >1 ) { - buf =virtqueue_get_buf (rq->vq, &len); -if (unlikely (!buf)) { -pr_debug ("%s: rx error: %d buffers missing\n" , - dev->name, num_buf); - dev->stats.rx_length_errors++; -break ; - } - stats->bytes += len;
Quoted 9 lines
drivers/net/virtio_net.c static struct sk_buff *receive_mergeable(struct net_device *dev, · line 1179
Quoted 8 lines
drivers/net/virtio_net.c +1
-4- page =virt_to_head_page (buf); -put_page (page); - } -err_buf: +merge_drop_follow_bufs (dev, rq, num_buf, stats); stats->drops++;dev_kfree_skb (head_skb); xdp_xmit:
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Xuan Zhuo
reviewerPATCH v5 9/15 virtio-net: virtnet_poll_tx support budget check
In reply to Xuan Zhuovirtnet_poll_tx() check the work done like other network card drivers.
When work < budget, napi_poll() in dev.c will exit directly. And virtqueue_napi_complete() will be called to close napi. If closing napi fails or there is still data to be processed, virtqueue_napi_complete() will make napi schedule again, and no conflicts with the logic of napi_poll().
When work == budget, virtnet_poll_tx() will return the var 'work', and the napi_poll() in dev.c will re-add napi to the queue.
The purpose of this patch is to support xsk xmit in virtio_poll_tx for subsequent patch.
--- drivers/net/virtio_net.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/virtio_net.c +4 -2
@@ -1634,6 +1634,7 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget)struct virtnet_info *vi = sq->vq->vdev->priv;unsigned int index =vq2txq (sq->vq);struct netdev_queue *txq; +int work_done =0 ;if (unlikely (is_xdp_raw_buffer_queue (vi, index))) {/* We don't need to enable cb for XDP */
@@ -1646,12 +1647,13 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget)free_old_xmit (sq, true);__netif_tx_unlock (txq); -virtqueue_napi_complete (napi, sq->vq,0 ); +if (work_done < budget) +virtqueue_napi_complete (napi, sq->vq,0 );if (sq->vq->num_free >=2 +MAX_SKB_FRAGS )netif_tx_wake_queue (txq); -return 0 ; +return work_done; }static int xmit_skb (struct send_queue *sq,struct sk_buff *skb)
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Xuan Zhuo
reviewerPATCH v5 10/15 virtio-net: independent directory
In reply to Xuan ZhuoCreate a separate directory for virtio-net. AF_XDP support will be added later, and a separate xsk.c file will be added.
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 8 +-------
drivers/net/Makefile | 2 +-
drivers/net/virtio/Kconfig | 11 +++++++++++
drivers/net/virtio/Makefile | 6 ++++++
drivers/net/{ => virtio}/virtio_net.c | 0
6 files changed, 20 insertions(+), 9 deletions(-)
create mode 100644 drivers/net/virtio/Kconfig
create mode 100644 drivers/net/virtio/Makefile
rename drivers/net/{ => virtio}/virtio_net.c (100%)MAINTAINERS +1 -1
@@ -19344,7 +19344,7 @@ S: Maintained F: Documentation/devicetree/bindings/virtio/ F: drivers/block/virtio_blk.c F: drivers/crypto/virtio/ -F: drivers/net/virtio_net.c +F: drivers/net/virtio/ F: drivers/vdpa/ F: drivers/virtio/ F: include/linux/vdpa.h
drivers/net/Kconfig +1 -7
@@ -392,13 +392,7 @@ config VETH When one end receives the packet it appears on its pair and vice versa. -config VIRTIO_NET - tristate "Virtio network driver" - depends on VIRTIO - select NET_FAILOVER - help - This is the virtual network driver for virtio. It can be used with - QEMU based VMMs (like KVM or Xen). Say Y or M. +source "drivers/net/virtio/Kconfig" config NLMON tristate "Virtual netlink monitoring device"
drivers/net/Makefile +1 -1
@@ -28,7 +28,7 @@ obj-$(CONFIG_NET_TEAM) += team/ obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_TAP) += tap.o obj-$(CONFIG_VETH) += veth.o -obj-$(CONFIG_VIRTIO_NET) += virtio_net.o +obj-$(CONFIG_VIRTIO_NET) += virtio/ obj-$(CONFIG_VXLAN) += vxlan.o obj-$(CONFIG_GENEVE) += geneve.o obj-$(CONFIG_BAREUDP) += bareudp.o
drivers/net/virtio/Kconfig new file +11 -0
@@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# virtio-net device configuration +# +config VIRTIO_NET + tristate "Virtio network driver" + depends on VIRTIO + select NET_FAILOVER + help + This is the virtual network driver for virtio. It can be used with + QEMU based VMMs (like KVM or Xen). Say Y or M.
drivers/net/virtio/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the virtio network device drivers. +# + +obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
drivers/net/virtio/virtio_net.c renamed from drivers/net/virtio_net.c +0 -0
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 10/15] virtio-net: independent directory
Quoted 4 lines · Xuan Zhuo
Create a separate directory for virtio-net.
AF_XDPsupport will be added later, and a separatexsk.cfile will be added.Signed-off-by Xuan Zhuo <[email protected]>
Quoted 90 lines
--- MAINTAINERS | 2 +- drivers/net/Kconfig | 8 +------- drivers/net/Makefile | 2 +- drivers/net/virtio/Kconfig | 11 +++++++++++ drivers/net/virtio/Makefile | 6 ++++++ drivers/net/{ => virtio}/virtio_net.c | 0 6 files changed, 20 insertions(+), 9 deletions(-)create mode 100644
drivers/net/virtio/Kconfigcreate mode 100644drivers/net/virtio/Makefilerenamedrivers/net/{=>virtio}/virtio_net.c(100%)MAINTAINERS +1
-1@@ -19344,7 +19344,7 @@ S: Maintained F: Documentation/devicetree/bindings/virtio/ F: drivers/block/virtio_blk.c F: drivers/crypto/virtio/ -F: drivers/net/virtio_net.c +F: drivers/net/virtio/ F: drivers/vdpa/ F: drivers/virtio/ F: include/linux/vdpa.hdrivers/net/Kconfig +1
-7@@ -392,13 +392,7 @@ config VETH When one end receives the packet it appears on its pair and vice versa. -config VIRTIO_NET - tristate "Virtio network driver" - depends on VIRTIO - select NET_FAILOVER - help - This is the virtual network driver for virtio. It can be used with - QEMU based VMMs (like KVM or Xen). Say Y or M. +source "drivers/net/virtio/Kconfig" config NLMON tristate "Virtual netlink monitoring device"drivers/net/Makefile +1
-1@@ -28,7 +28,7 @@ obj-$(CONFIG_NET_TEAM) += team/ obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_TAP) += tap.o obj-$(CONFIG_VETH) += veth.o -obj-$(CONFIG_VIRTIO_NET) += virtio_net.o +obj-$(CONFIG_VIRTIO_NET) += virtio/ obj-$(CONFIG_VXLAN) += vxlan.o obj-$(CONFIG_GENEVE) += geneve.o obj-$(CONFIG_BAREUDP) += bareudp.odrivers/net/virtio/Kconfig new file +11
-0@@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# virtio-net device configuration +# +config VIRTIO_NET + tristate "Virtio network driver" + depends on VIRTIO + select NET_FAILOVER + help + This is the virtual network driver for virtio. It can be used with + QEMU based VMMs (like KVM or Xen). Say Y or M.drivers/net/virtio/Makefile new file +6
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the virtio network device drivers. +# + +obj-$(CONFIG_VIRTIO_NET) += virtio_net.odrivers/net/virtio/virtio_net.c renamed from drivers/net/virtio_net.c +0
-0
Xuan Zhuo
reviewerPATCH v5 11/15 virtio-net: move to virtio_net.h
In reply to Xuan ZhuoMove some structure definitions and inline functions into the virtio_net.h file.
--- drivers/net/virtio/virtio_net.c | 225 +------------------------------ drivers/net/virtio/virtio_net.h | 230 ++++++++++++++++++++++++++++++++ 2 files changed, 232 insertions(+), 223 deletions(-) create mode 100644 drivers/net/virtio/virtio_net.h
drivers/net/virtio/virtio_net.c +2 -223
@@ -4,24 +4,8 @@* Copyright 2007 Rusty Russell <[email protected]> IBM Corporation */ //#define DEBUG -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> -#include <linux/module.h> -#include <linux/virtio.h> -#include <linux/virtio_net.h> -#include <linux/bpf.h> -#include <linux/bpf_trace.h> -#include <linux/scatterlist.h> -#include <linux/if_vlan.h> -#include <linux/slab.h> -#include <linux/cpu.h> -#include <linux/average.h> -#include <linux/filter.h> -#include <linux/kernel.h> -#include <net/route.h> -#include <net/xdp.h> -#include <net/net_failover.h> + +#include "virtio_net.h" static int napi_weight =NAPI_POLL_WEIGHT ;module_param (napi_weight, int,0444 );
@@ -44,15 +28,6 @@ module_param(napi_tx, bool, 0644);#define VIRTIO_XDP_TX BIT(0)#define VIRTIO_XDP_REDIR BIT(1) -#define VIRTIO_XDP_FLAG BIT(0) - -/* RX packet size EWMA. The average packet size is used to determine the packet -* buffer size when refilling RX rings. As the entire RX ring may be refilled -* at once, the weight is chosen so that the EWMA will be insensitive to short- -* term, transient changes in packet size. -*/ -DECLARE_EWMA(pkt_len, 0, 64) -#define VIRTNET_DRIVER_VERSION "1.0.0"static const unsigned long guest_offloads[] = {
@@ -68,35 +43,6 @@ static const unsigned long guest_offloads[] = { (1ULL << VIRTIO_NET_F_GUEST_ECN) | \ (1ULL << VIRTIO_NET_F_GUEST_UFO)) -struct virtnet_stat_desc { -char desc[ETH_GSTRING_LEN ]; -size_t offset; -}; - -struct virtnet_sq_stats { -struct u64_stats_sync syncp; -u64 packets; -u64 bytes; -u64 xdp_tx; -u64 xdp_tx_drops; -u64 kicks; -}; - -struct virtnet_rq_stats { -struct u64_stats_sync syncp; -u64 packets; -u64 bytes; -u64 drops; -u64 xdp_packets; -u64 xdp_tx; -u64 xdp_redirects; -u64 xdp_drops; -u64 kicks; -}; - -#define VIRTNET_SQ_STAT (m) offsetof(struct virtnet_sq_stats, m) -#define VIRTNET_RQ_STAT (m) offsetof(struct virtnet_rq_stats, m) -static const struct virtnet_stat_desc virtnet_sq_stats_desc[] = { {"packets" ,VIRTNET_SQ_STAT (packets) }, {"bytes" ,VIRTNET_SQ_STAT (bytes) },
@@ -119,54 +65,6 @@ static const struct virtnet_stat_desc virtnet_rq_stats_desc[] = {#define VIRTNET_SQ_STATS_LEN ARRAY_SIZE(virtnet_sq_stats_desc)#define VIRTNET_RQ_STATS_LEN ARRAY_SIZE(virtnet_rq_stats_desc) -/* Internal representation of a send virtqueue */ -struct send_queue { -/* Virtqueue associated with this send _queue */ -struct virtqueue *vq; - -/* TX: fragments + linear part + virtio header */ -struct scatterlist sg[MAX_SKB_FRAGS +2 ]; - -/* Name of the send queue: output.$index */ -char name[40 ]; - -struct virtnet_sq_stats stats; - -struct napi_struct napi; -}; - -/* Internal representation of a receive virtqueue */ -struct receive_queue { -/* Virtqueue associated with this receive_queue */ -struct virtqueue *vq; - -struct napi_struct napi; - -struct bpf_prog __rcu *xdp_prog; - -struct virtnet_rq_stats stats; - -/* Chain pages by the private ptr. */ -struct page *pages; - -/* Average packet length for mergeable receive buffers. */ -struct ewma_pkt_len mrg_avg_pkt_len; - -/* Page frag for packet buffer allocation. */ -struct page_frag alloc_frag; - -/* RX: fragments + linear part + virtio header */ -struct scatterlist sg[MAX_SKB_FRAGS +2 ]; - -/* Min single buffer size for mergeable buffers case. */ -unsigned int min_buf_len; - -/* Name of this receive queue: input.$index */ -char name[40 ]; - -struct xdp_rxq_info xdp_rxq; -}; -/* Control VQ buffers: protected by the rtnl lock */ struct control_buf {struct virtio_net_ctrl_hdr hdr;
@@ -178,67 +76,6 @@ struct control_buf {__virtio64 offloads; }; -struct virtnet_info { -struct virtio_device *vdev; -struct virtqueue *cvq; -struct net_device *dev; -struct send_queue *sq; -struct receive_queue *rq; -unsigned int status; - -/* Max # of queue pairs supported by the device */ -u16 max_queue_pairs; - -/* # of queue pairs currently used by the driver */ -u16 curr_queue_pairs; - -/* # of XDP queue pairs currently used by the driver */ -u16 xdp_queue_pairs; - -/* xdp_queue_pairs may be 0, when xdp is already loaded. So add this. */ -bool xdp_enabled; - -/* I like... big packets and I cannot lie! */ -bool big_packets; - -/* Host will merge rx buffers for big packets (shake it! shake it!) */ -bool mergeable_rx_bufs; - -/* Has control virtqueue */ -bool has_cvq; - -/* Host can handle any s/g split between our header and packet data */ -bool any_header_sg; - -/* Packet virtio header size */ -u8 hdr_len; - -/* Work struct for refilling if we run low on memory. */ -struct delayed_work refill; - -/* Work struct for config space updates */ -struct work_struct config_work; - -/* Does the affinity hint is set for virtqueues? */ -bool affinity_hint_set; - -/* CPU hotplug instances for online & dead */ -struct hlist_node node; -struct hlist_node node_dead; - -struct control_buf *ctrl; - -/* Ethtool settings */ -u8 duplex; -u32 speed; - -unsigned long guest_offloads; -unsigned long guest_offloads_capable; - -/* failover when STANDBY feature enabled */ -struct failover *failover; -}; -struct padded_vnet_hdr {struct virtio_net_hdr_mrg_rxbuf hdr;/*
@@ -249,21 +86,6 @@ struct padded_vnet_hdr {char padding[4 ]; }; -static bool is_xdp_frame (void *ptr) -{ -return (unsigned long )ptr &VIRTIO_XDP_FLAG ; -} - -static void *xdp_to_ptr (struct xdp_frame *ptr) -{ -return (void *)((unsigned long )ptr |VIRTIO_XDP_FLAG ); -} - -static struct xdp_frame *ptr_to_xdp (void *ptr) -{ -return (struct xdp_frame *)((unsigned long )ptr & ~VIRTIO_XDP_FLAG ); -} -static char *virtnet_alloc_frag (struct receive_queue *rq,unsigned int len,int gfp) {
@@ -280,30 +102,6 @@ static char *virtnet_alloc_frag(struct receive_queue *rq, unsigned int len,return buf; } -static void __free_old_xmit (struct send_queue *sq,bool in_napi, -struct virtnet_sq_stats *stats) -{ -unsigned int len; -void *ptr; - -while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (!is_xdp_frame (ptr)) { -struct sk_buff *skb = ptr; - -pr_debug ("Sent skb %p\n" , skb); - - stats->bytes += skb->len; -napi_consume_skb (skb, in_napi); - }else { -struct xdp_frame *frame =ptr_to_xdp (ptr); - - stats->bytes += frame->len; -xdp_return_frame (frame); - } - stats->packets++; - } -} -/* Converting between virtqueue no. and kernel tx/rx queue no. * 0:rx0 1:tx0 2:rx1 3:tx1 ... 2N:rxN 2N+1:txN 2N+2:cvq */
@@ -359,15 +157,6 @@ static struct page *get_a_page(struct receive_queue *rq, gfp_t gfp_mask)return p; } -static void virtqueue_napi_schedule (struct napi_struct *napi, -struct virtqueue *vq) -{ -if (napi_schedule_prep (napi)) { -virtqueue_disable_cb (vq); -__napi_schedule (napi); - } -} -static void virtqueue_napi_complete (struct napi_struct *napi,struct virtqueue *vq,int processed) {
@@ -1537,16 +1326,6 @@ static void free_old_xmit(struct send_queue *sq, bool in_napi)u64_stats_update_end (&sq->stats.syncp); } -static bool is_xdp_raw_buffer_queue (struct virtnet_info *vi,int q) -{ -if (q < (vi->curr_queue_pairs - vi->xdp_queue_pairs)) -return false; -else if (q < vi->curr_queue_pairs) -return true; -else -return false; -} -static void virtnet_poll_cleantx (struct receive_queue *rq) {struct virtnet_info *vi = rq->vq->vdev->priv;
drivers/net/virtio/virtio_net.h new file +230 -0
230 lines not on this page · raw message
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 11/15] virtio-net: move to virtio_net.h
Quoted 4 lines · Xuan Zhuo
Move some structure definitions and inline functions into the
virtio_net.hfile.Signed-off-by Xuan Zhuo <[email protected]>
Quoted 524 lines
--- drivers/net/virtio/virtio_net.c | 225 +------------------------------ drivers/net/virtio/virtio_net.h | 230 ++++++++++++++++++++++++++++++++ 2 files changed, 232 insertions(+), 223 deletions(-)create mode 100644
drivers/net/virtio/virtio_net.hdrivers/net/virtio/virtio_net.c +2
-223@@ -4,24 +4,8 @@* Copyright 2007 Rusty Russell <[email protected]> IBM Corporation */ //#define DEBUG -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> -#include <linux/module.h> -#include <linux/virtio.h> -#include <linux/virtio_net.h> -#include <linux/bpf.h> -#include <linux/bpf_trace.h> -#include <linux/scatterlist.h> -#include <linux/if_vlan.h> -#include <linux/slab.h> -#include <linux/cpu.h> -#include <linux/average.h> -#include <linux/filter.h> -#include <linux/kernel.h> -#include <net/route.h> -#include <net/xdp.h> -#include <net/net_failover.h> + +#include "virtio_net.h" static int napi_weight =NAPI_POLL_WEIGHT ;module_param (napi_weight, int,0444 );@@ -44,15 +28,6 @@ module_param(napi_tx, bool, 0644);#define VIRTIO_XDP_TX BIT(0)#define VIRTIO_XDP_REDIR BIT(1) -#define VIRTIO_XDP_FLAG BIT(0) - -/* RX packet size EWMA. The average packet size is used to determine the packet -* buffer size when refilling RX rings. As the entire RX ring may be refilled -* at once, the weight is chosen so that the EWMA will be insensitive to short- -* term, transient changes in packet size. -*/ -DECLARE_EWMA(pkt_len, 0, 64) -#define VIRTNET_DRIVER_VERSION "1.0.0"static const unsigned long guest_offloads[] = {@@ -68,35 +43,6 @@ static const unsigned long guest_offloads[] = { (1ULL << VIRTIO_NET_F_GUEST_ECN) | \ (1ULL << VIRTIO_NET_F_GUEST_UFO)) -struct virtnet_stat_desc { -char desc[ETH_GSTRING_LEN ]; -size_t offset; -}; - -struct virtnet_sq_stats { -struct u64_stats_sync syncp; -u64 packets; -u64 bytes; -u64 xdp_tx; -u64 xdp_tx_drops; -u64 kicks; -}; - -struct virtnet_rq_stats { -struct u64_stats_sync syncp; -u64 packets; -u64 bytes; -u64 drops; -u64 xdp_packets; -u64 xdp_tx; -u64 xdp_redirects; -u64 xdp_drops; -u64 kicks; -}; - -#define VIRTNET_SQ_STAT (m) offsetof(struct virtnet_sq_stats, m) -#define VIRTNET_RQ_STAT (m) offsetof(struct virtnet_rq_stats, m) -static const struct virtnet_stat_desc virtnet_sq_stats_desc[] = { {"packets" ,VIRTNET_SQ_STAT (packets) }, {"bytes" ,VIRTNET_SQ_STAT (bytes) },@@ -119,54 +65,6 @@ static const struct virtnet_stat_desc virtnet_rq_stats_desc[] = {#define VIRTNET_SQ_STATS_LEN ARRAY_SIZE(virtnet_sq_stats_desc)#define VIRTNET_RQ_STATS_LEN ARRAY_SIZE(virtnet_rq_stats_desc) -/* Internal representation of a send virtqueue */ -struct send_queue { -/* Virtqueue associated with this send _queue */ -struct virtqueue *vq; - -/* TX: fragments + linear part + virtio header */ -struct scatterlist sg[MAX_SKB_FRAGS +2 ]; - -/* Name of the send queue: output.$index */ -char name[40 ]; - -struct virtnet_sq_stats stats; - -struct napi_struct napi; -}; - -/* Internal representation of a receive virtqueue */ -struct receive_queue { -/* Virtqueue associated with this receive_queue */ -struct virtqueue *vq; - -struct napi_struct napi; - -struct bpf_prog __rcu *xdp_prog; - -struct virtnet_rq_stats stats; - -/* Chain pages by the private ptr. */ -struct page *pages; - -/* Average packet length for mergeable receive buffers. */ -struct ewma_pkt_len mrg_avg_pkt_len; - -/* Page frag for packet buffer allocation. */ -struct page_frag alloc_frag; - -/* RX: fragments + linear part + virtio header */ -struct scatterlist sg[MAX_SKB_FRAGS +2 ]; - -/* Min single buffer size for mergeable buffers case. */ -unsigned int min_buf_len; - -/* Name of this receive queue: input.$index */ -char name[40 ]; - -struct xdp_rxq_info xdp_rxq; -}; -/* Control VQ buffers: protected by the rtnl lock */ struct control_buf {struct virtio_net_ctrl_hdr hdr;@@ -178,67 +76,6 @@ struct control_buf {__virtio64 offloads; }; -struct virtnet_info { -struct virtio_device *vdev; -struct virtqueue *cvq; -struct net_device *dev; -struct send_queue *sq; -struct receive_queue *rq; -unsigned int status; - -/* Max # of queue pairs supported by the device */ -u16 max_queue_pairs; - -/* # of queue pairs currently used by the driver */ -u16 curr_queue_pairs; - -/* # of XDP queue pairs currently used by the driver */ -u16 xdp_queue_pairs; - -/* xdp_queue_pairs may be 0, when xdp is already loaded. So add this. */ -bool xdp_enabled; - -/* I like... big packets and I cannot lie! */ -bool big_packets; - -/* Host will merge rx buffers for big packets (shake it! shake it!) */ -bool mergeable_rx_bufs; - -/* Has control virtqueue */ -bool has_cvq; - -/* Host can handle any s/g split between our header and packet data */ -bool any_header_sg; - -/* Packet virtio header size */ -u8 hdr_len; - -/* Work struct for refilling if we run low on memory. */ -struct delayed_work refill; - -/* Work struct for config space updates */ -struct work_struct config_work; - -/* Does the affinity hint is set for virtqueues? */ -bool affinity_hint_set; - -/* CPU hotplug instances for online & dead */ -struct hlist_node node; -struct hlist_node node_dead; - -struct control_buf *ctrl; - -/* Ethtool settings */ -u8 duplex; -u32 speed; - -unsigned long guest_offloads; -unsigned long guest_offloads_capable; - -/* failover when STANDBY feature enabled */ -struct failover *failover; -}; -struct padded_vnet_hdr {struct virtio_net_hdr_mrg_rxbuf hdr;/* @@ -249,21 +86,6 @@ struct padded_vnet_hdr {char padding[4 ]; }; -static bool is_xdp_frame (void *ptr) -{ -return (unsigned long )ptr &VIRTIO_XDP_FLAG ; -} - -static void *xdp_to_ptr (struct xdp_frame *ptr) -{ -return (void *)((unsigned long )ptr |VIRTIO_XDP_FLAG ); -} - -static struct xdp_frame *ptr_to_xdp (void *ptr) -{ -return (struct xdp_frame *)((unsigned long )ptr & ~VIRTIO_XDP_FLAG ); -} -static char *virtnet_alloc_frag (struct receive_queue *rq,unsigned int len,int gfp) {@@ -280,30 +102,6 @@ static char *virtnet_alloc_frag(struct receive_queue *rq, unsigned int len,return buf; } -static void __free_old_xmit (struct send_queue *sq,bool in_napi, -struct virtnet_sq_stats *stats) -{ -unsigned int len; -void *ptr; - -while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (!is_xdp_frame (ptr)) { -struct sk_buff *skb = ptr; - -pr_debug ("Sent skb %p\n" , skb); - - stats->bytes += skb->len; -napi_consume_skb (skb, in_napi); - }else { -struct xdp_frame *frame =ptr_to_xdp (ptr); - - stats->bytes += frame->len; -xdp_return_frame (frame); - } - stats->packets++; - } -} -/* Converting between virtqueue no. and kernel tx/rx queue no. * 0:rx0 1:tx0 2:rx1 3:tx1 ... 2N:rxN 2N+1:txN 2N+2:cvq */ @@ -359,15 +157,6 @@ static struct page *get_a_page(struct receive_queue *rq, gfp_t gfp_mask)return p; } -static void virtqueue_napi_schedule (struct napi_struct *napi, -struct virtqueue *vq) -{ -if (napi_schedule_prep (napi)) { -virtqueue_disable_cb (vq); -__napi_schedule (napi); - } -} -static void virtqueue_napi_complete (struct napi_struct *napi,struct virtqueue *vq,int processed) {@@ -1537,16 +1326,6 @@ static void free_old_xmit(struct send_queue *sq, bool in_napi)u64_stats_update_end (&sq->stats.syncp); } -static bool is_xdp_raw_buffer_queue (struct virtnet_info *vi,int q) -{ -if (q < (vi->curr_queue_pairs - vi->xdp_queue_pairs)) -return false; -else if (q < vi->curr_queue_pairs) -return true; -else -return false; -} -static void virtnet_poll_cleantx (struct receive_queue *rq) {struct virtnet_info *vi = rq->vq->vdev->priv;drivers/net/virtio/virtio_net.h new file +220
-0@@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef __VIRTIO_NET_H__ +#define __VIRTIO_NET_H__ +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/module.h> +#include <linux/virtio.h> +#include <linux/virtio_net.h> +#include <linux/bpf.h> +#include <linux/bpf_trace.h> +#include <linux/scatterlist.h> +#include <linux/if_vlan.h> +#include <linux/slab.h> +#include <linux/cpu.h> +#include <linux/average.h> +#include <linux/filter.h> +#include <linux/kernel.h> +#include <net/route.h> +#include <net/xdp.h> +#include <net/net_failover.h> +#include <net/xdp_sock_drv.h> + +#define VIRTIO_XDP_FLAG BIT(0) + +struct virtnet_info { +struct virtio_device *vdev; +struct virtqueue *cvq; +struct net_device *dev; +struct send_queue *sq; +struct receive_queue *rq; +unsigned int status; + +/* Max # of queue pairs supported by the device */ +u16 max_queue_pairs; + +/* # of queue pairs currently used by the driver */ +u16 curr_queue_pairs; + +/* # of XDP queue pairs currently used by the driver */ +u16 xdp_queue_pairs; + +/* xdp_queue_pairs may be 0, when xdp is already loaded. So add this. */ +bool xdp_enabled; + +/* I like... big packets and I cannot lie! */ +bool big_packets; + +/* Host will merge rx buffers for big packets (shake it! shake it!) */ +bool mergeable_rx_bufs; + +/* Has control virtqueue */ +bool has_cvq; + +/* Host can handle any s/g split between our header and packet data */ +bool any_header_sg; + +/* Packet virtio header size */ +u8 hdr_len; + +/* Work struct for refilling if we run low on memory. */ +struct delayed_work refill; + +/* Work struct for config space updates */ +struct work_struct config_work; + +/* Does the affinity hint is set for virtqueues? */ +bool affinity_hint_set; + +/* CPU hotplug instances for online & dead */ +struct hlist_node node; +struct hlist_node node_dead; + +struct control_buf *ctrl; + +/* Ethtool settings */ +u8 duplex; +u32 speed; + +unsigned long guest_offloads; +unsigned long guest_offloads_capable; + +/* failover when STANDBY feature enabled */ +struct failover *failover; +}; + +/* RX packet size EWMA. The average packet size is used to determine the packet +* buffer size when refilling RX rings. As the entire RX ring may be refilled +* at once, the weight is chosen so that the EWMA will be insensitive to short- +* term, transient changes in packet size. +*/ +DECLARE_EWMA(pkt_len, 0, 64) + +struct virtnet_stat_desc { +char desc[ETH_GSTRING_LEN ]; +size_t offset; +}; + +struct virtnet_sq_stats { +struct u64_stats_sync syncp; +u64 packets; +u64 bytes; +u64 xdp_tx; +u64 xdp_tx_drops; +u64 kicks; +}; + +struct virtnet_rq_stats { +struct u64_stats_sync syncp; +u64 packets; +u64 bytes; +u64 drops; +u64 xdp_packets; +u64 xdp_tx; +u64 xdp_redirects; +u64 xdp_drops; +u64 kicks; +}; + +#define VIRTNET_SQ_STAT (m) offsetof(struct virtnet_sq_stats, m) +#define VIRTNET_RQ_STAT (m) offsetof(struct virtnet_rq_stats, m) + +/* Internal representation of a send virtqueue */ +struct send_queue { +/* Virtqueue associated with this send _queue */ +struct virtqueue *vq; + +/* TX: fragments + linear part + virtio header */ +struct scatterlist sg[MAX_SKB_FRAGS +2 ]; + +/* Name of the send queue: output.$index */ +char name[40 ]; + +struct virtnet_sq_stats stats; + +struct napi_struct napi; +}; + +/* Internal representation of a receive virtqueue */ +struct receive_queue { +/* Virtqueue associated with this receive_queue */ +struct virtqueue *vq; + +struct napi_struct napi; + +struct bpf_prog __rcu *xdp_prog; + +struct virtnet_rq_stats stats; + +/* Chain pages by the private ptr. */ +struct page *pages; + +/* Average packet length for mergeable receive buffers. */ +struct ewma_pkt_len mrg_avg_pkt_len; + +/* Page frag for packet buffer allocation. */ +struct page_frag alloc_frag; + +/* RX: fragments + linear part + virtio header */ +struct scatterlist sg[MAX_SKB_FRAGS +2 ]; + +/* Min single buffer size for mergeable buffers case. */ +unsigned int min_buf_len; + +/* Name of this receive queue: input.$index */ +char name[40 ]; + +struct xdp_rxq_info xdp_rxq; +}; + +static inline bool is_xdp_raw_buffer_queue (struct virtnet_info *vi,int q) +{ +if (q < (vi->curr_queue_pairs - vi->xdp_queue_pairs)) +return false; +else if (q < vi->curr_queue_pairs) +return true; +else +return false; +} + +static inline void virtqueue_napi_schedule (struct napi_struct *napi, +struct virtqueue *vq) +{ +if (napi_schedule_prep (napi)) { +virtqueue_disable_cb (vq); +__napi_schedule (napi); + } +} + +static inline bool is_xdp_frame (void *ptr) +{ +return (unsigned long )ptr &VIRTIO_XDP_FLAG ; +} + +static inline void *xdp_to_ptr (struct xdp_frame *ptr) +{ +return (void *)((unsigned long )ptr |VIRTIO_XDP_FLAG ); +} + +static inline struct xdp_frame *ptr_to_xdp (void *ptr) +{ +return (struct xdp_frame *)((unsigned long )ptr & ~VIRTIO_XDP_FLAG ); +} + +static inline void __free_old_xmit (struct send_queue *sq,bool in_napi, +struct virtnet_sq_stats *stats) +{ +unsigned int len; +void *ptr; + +while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { +if (!is_xdp_frame (ptr)) { +struct sk_buff *skb = ptr; + +pr_debug ("Sent skb %p\n" , skb); + + stats->bytes += skb->len; +napi_consume_skb (skb, in_napi); + }else {
drivers/net/virtio/virtio_net.h line 230
Quoted 10 lines
drivers/net/virtio/virtio_net.h new file +10
-0+struct xdp_frame *frame =ptr_to_xdp (ptr); + + stats->bytes += frame->len; + xdp_return_frame(frame); + } + stats->packets++; + } +} + +#endif
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Xuan Zhuo
reviewerPATCH v5 12/15 virtio-net: support AF_XDP zc tx
In reply to Xuan ZhuoAF_XDP(xdp socket, xsk) is a high-performance packet receiving and sending technology.
This patch implements the binding and unbinding operations of xsk and the virtio-net queue for xsk zero copy xmit.
The xsk zero copy xmit depends on tx napi. Because the actual sending of data is done in the process of tx napi. If tx napi does not work, then the data of the xsk tx queue will not be sent. So if tx napi is not true, an error will be reported when bind xsk.
If xsk is active, it will prevent ethtool from modifying tx napi.
When reclaiming ptr, a new type of ptr is added, which is distinguished based on the last two digits of ptr:
00: skb
01: xdp frame
10: xsk xmit ptr
All sent xsk packets share the virtio-net header of xsk_hdr. If xsk needs to support csum and other functions later, consider assigning xsk hdr separately for each sent packet.
Different from other physical network cards, you can reinitialize the channel when you bind xsk. And vrtio does not support independent reset channel, you can only reset the entire device. I think it is not appropriate for us to directly reset the entire setting. So the situation becomes a bit more complicated. We have to consider how to deal with the buffer referenced in vq after xsk is unbind.
I added the ring size struct virtnet_xsk_ctx when xsk been bind. Each xsk buffer added to vq corresponds to a ctx. This ctx is used to record the page where the xsk buffer is located, and add a page reference. When the buffer is recycling, reduce the reference to page. When xsk has been unbind, and all related xsk buffers have been recycled, release all ctx.
--- drivers/net/virtio/Makefile | 1 + drivers/net/virtio/virtio_net.c | 20 +- drivers/net/virtio/virtio_net.h | 37 +++- drivers/net/virtio/xsk.c | 346 ++++++++++++++++++++++++++++++++ drivers/net/virtio/xsk.h | 99 +++++++++ 5 files changed, 497 insertions(+), 6 deletions(-) create mode 100644 drivers/net/virtio/xsk.c create mode 100644 drivers/net/virtio/xsk.h
drivers/net/virtio/Makefile +1 -0
@@ -4,3 +4,4 @@ # obj-$(CONFIG_VIRTIO_NET) += virtio_net.o +obj-$(CONFIG_VIRTIO_NET) += xsk.o
drivers/net/virtio/virtio_net.c +17 -3
@@ -1423,6 +1423,7 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget) txq =netdev_get_tx_queue (vi->dev, index);__netif_tx_lock (txq,raw_smp_processor_id ()); + work_done +=virtnet_poll_xsk (sq, budget);free_old_xmit (sq, true);__netif_tx_unlock (txq);
@@ -2133,8 +2134,16 @@ static int virtnet_set_coalesce(struct net_device *dev,if (napi_weight ^ vi->sq[0 ].napi.weight) {if (dev->flags &IFF_UP )return -EBUSY ; -for (i =0 ; i < vi->max_queue_pairs; i++) + +for (i =0 ; i < vi->max_queue_pairs; i++) { +/* xsk xmit depend on the tx napi. So if xsk is active, +* prevent modifications to tx napi. +*/ +if (rtnl_dereference (vi->sq[i].xsk.pool)) +continue ; + vi->sq[i].napi.weight = napi_weight; + } }return 0 ;
@@ -2407,6 +2416,8 @@ static int virtnet_xdp(struct net_device *dev, struct netdev_bpf *xdp)switch (xdp->command) {case XDP_SETUP_PROG :return virtnet_xdp_set (dev, xdp->prog, xdp->extack); +case XDP_SETUP_XSK_POOL : +return virtnet_xsk_pool_setup (dev, xdp);default :return -EINVAL ; }
@@ -2466,6 +2477,7 @@ static const struct net_device_ops virtnet_netdev = { .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, .ndo_bpf = virtnet_xdp, .ndo_xdp_xmit = virtnet_xdp_xmit, + .ndo_xsk_wakeup = virtnet_xsk_wakeup, .ndo_features_check = passthru_features_check, .ndo_get_phys_port_name = virtnet_get_phys_port_name, .ndo_set_features = virtnet_set_features,
@@ -2569,10 +2581,12 @@ static void free_unused_bufs(struct virtnet_info *vi)for (i =0 ; i < vi->max_queue_pairs; i++) {struct virtqueue *vq = vi->sq[i].vq;while ((buf =virtqueue_detach_unused_buf (vq)) !=NULL ) { -if (!is_xdp_frame (buf)) +if (is_skb_ptr (buf))dev_kfree_skb (buf); -else +else if (is_xdp_frame (buf))xdp_return_frame (ptr_to_xdp (buf)); +else +virtnet_xsk_ctx_tx_put (ptr_to_xsk (buf)); } }
drivers/net/virtio/virtio_net.h +34 -3
@@ -135,6 +135,16 @@ struct send_queue {struct virtnet_sq_stats stats;struct napi_struct napi; + +struct { +struct xsk_buff_pool __rcu *pool; + +/* xsk wait for tx inter or softirq */ +bool need_wakeup; + +/* ctx used to record the page added to vq */ +struct virtnet_xsk_ctx_head *ctx_head; + } xsk; };/* Internal representation of a receive virtqueue */
@@ -188,6 +198,13 @@ static inline void virtqueue_napi_schedule(struct napi_struct *napi, } } +#include "xsk.h" + +static inline bool is_skb_ptr (void *ptr) +{ +return !((unsigned long )ptr & (VIRTIO_XDP_FLAG |VIRTIO_XSK_FLAG )); +} +static inline bool is_xdp_frame (void *ptr) {return (unsigned long )ptr &VIRTIO_XDP_FLAG ;
@@ -206,25 +223,39 @@ static inline struct xdp_frame *ptr_to_xdp(void *ptr)static inline void __free_old_xmit (struct send_queue *sq,bool in_napi,struct virtnet_sq_stats *stats) { +unsigned int xsknum =0 ;unsigned int len;void *ptr;while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (!is_xdp_frame (ptr)) { +if (is_skb_ptr (ptr)) {struct sk_buff *skb = ptr;pr_debug ("Sent skb %p\n" , skb); stats->bytes += skb->len;napi_consume_skb (skb, in_napi); - }else { + }else if (is_xdp_frame (ptr)) {struct xdp_frame *frame =ptr_to_xdp (ptr); stats->bytes += frame->len;xdp_return_frame (frame); + }else { +struct virtnet_xsk_ctx_tx *ctx; + + ctx =ptr_to_xsk (ptr); + +/* Maybe this ptr was sent by the last xsk. */ +if (ctx->ctx.head->active) + ++xsknum; + + stats->bytes += ctx->len; +virtnet_xsk_ctx_tx_put (ctx); } stats->packets++; } -} +if (xsknum) +virtnet_xsk_complete (sq, xsknum); +}#endif
drivers/net/virtio/xsk.c new file +346 -0
346 lines not on this page · raw message
drivers/net/virtio/xsk.h new file +99 -0
99 lines not on this page · raw message
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 12/15] virtio-net: support AF_XDP zc tx
Quoted 71 lines · Xuan Zhuo
AF_XDP(xdp socket, xsk)is a high-performance packet receiving and sending technology.This patch implements the binding and unbinding operations of xsk and the virtio-net queue for xsk zero copy xmit.
The xsk zero copy xmit depends on tx napi. Because the actual sending of data is done in the process of tx napi. If tx napi does not work, then the data of the xsk tx queue will not be sent. So if tx napi is not true, an error will be reported when bind xsk.
If xsk is active, it will prevent ethtool from modifying tx napi.
When reclaiming ptr, a new type of ptr is added, which is distinguished based on the last two digits of ptr:
00: skb
01: xdp frame
10: xsk xmit ptrAll sent xsk packets share the virtio-net header of
xsk_hdr. If xsk needs to support csum and other functions later, consider assigning xsk hdr separately for each sent packet.Different from other physical network cards, you can reinitialize the channel when you bind xsk. And vrtio does not support independent reset channel, you can only reset the entire device. I think it is not appropriate for us to directly reset the entire setting. So the situation becomes a bit more complicated. We have to consider how to deal with the buffer referenced in vq after xsk is unbind.
I added the ring size struct
virtnet_xsk_ctxwhen xsk been bind. Each xsk buffer added to vq corresponds to a ctx. This ctx is used to record the page where the xsk buffer is located, and add a page reference. When the buffer is recycling, reduce the reference to page. When xsk has been unbind, and all related xsk buffers have been recycled, release all ctx.Signed-off-by Xuan Zhuo <[email protected]>Reviewed-by Dust Li <[email protected]>--- drivers/net/virtio/Makefile | 1 + drivers/net/virtio/virtio_net.c | 20 +- drivers/net/virtio/virtio_net.h | 37 +++- drivers/net/virtio/xsk.c | 346 ++++++++++++++++++++++++++++++++ drivers/net/virtio/xsk.h | 99 +++++++++ 5 files changed, 497 insertions(+), 6 deletions(-)create mode 100644
drivers/net/virtio/xsk.c
create mode 100644drivers/net/virtio/xsk.hdrivers/net/virtio/Makefile +1
-0@@ -4,3 +4,4 @@ # obj-$(CONFIG_VIRTIO_NET) += virtio_net.o +obj-$(CONFIG_VIRTIO_NET) += xsk.odrivers/net/virtio/virtio_net.c +1
-0@@ -1423,6 +1423,7 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget) txq =netdev_get_tx_queue (vi->dev, index);__netif_tx_lock (txq,raw_smp_processor_id ()); + work_done +=virtnet_poll_xsk (sq, budget);free_old_xmit (sq, true);__netif_tx_unlock (txq);@@ -2133,8 +2134,16 @@ static int virtnet_set_coalesce(struct net_device *dev,if (napi_weight ^ vi->sq[0 ].napi.weight) {
drivers/net/virtio/virtio_net.c static int virtnet_set_coalesce(struct net_device *dev, · line 2143
Quoted 10 lines
drivers/net/virtio/virtio_net.c +7
-1if (dev->flags &IFF_UP )return -EBUSY ; -for (i =0 ; i < vi->max_queue_pairs; i++) + +for (i =0 ; i < vi->max_queue_pairs; i++) { +/* xsk xmit depend on the tx napi. So if xsk is active, +* prevent modifications to tx napi. +*/ +if (rtnl_dereference (vi->sq[i].xsk.pool)) +continue ;
So this can result tx NAPI is used by some queues buy not the others. I think such inconsistency breaks the semantic of set_coalesce() which assumes the operation is done at the device not some specific queues.
How about just fail here?
Quoted 211 lines
drivers/net/virtio/virtio_net.c +9
-2+ vi->sq[i].napi.weight = napi_weight; + } }return 0 ;@@ -2407,6 +2416,8 @@ static int virtnet_xdp(struct net_device *dev, struct netdev_bpf *xdp)switch (xdp->command) {case XDP_SETUP_PROG :return virtnet_xdp_set (dev, xdp->prog, xdp->extack); +case XDP_SETUP_XSK_POOL : +return virtnet_xsk_pool_setup (dev, xdp);default :return -EINVAL ; }@@ -2466,6 +2477,7 @@ static const struct net_device_ops virtnet_netdev = { .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, .ndo_bpf = virtnet_xdp, .ndo_xdp_xmit = virtnet_xdp_xmit, + .ndo_xsk_wakeup = virtnet_xsk_wakeup, .ndo_features_check = passthru_features_check, .ndo_get_phys_port_name = virtnet_get_phys_port_name, .ndo_set_features = virtnet_set_features,@@ -2569,10 +2581,12 @@ static void free_unused_bufs(struct virtnet_info *vi)for (i =0 ; i < vi->max_queue_pairs; i++) {struct virtqueue *vq = vi->sq[i].vq;while ((buf =virtqueue_detach_unused_buf (vq)) !=NULL ) { -if (!is_xdp_frame (buf)) +if (is_skb_ptr (buf))dev_kfree_skb (buf); -else +else if (is_xdp_frame (buf))xdp_return_frame (ptr_to_xdp (buf)); +else +virtnet_xsk_ctx_tx_put (ptr_to_xsk (buf)); } }drivers/net/virtio/virtio_net.h +34
-3@@ -135,6 +135,16 @@ struct send_queue {struct virtnet_sq_stats stats;struct napi_struct napi; + +struct { +struct xsk_buff_pool __rcu *pool; + +/* xsk wait for tx inter or softirq */ +bool need_wakeup; + +/* ctx used to record the page added to vq */ +struct virtnet_xsk_ctx_head *ctx_head; + } xsk; };/* Internal representation of a receive virtqueue */ @@ -188,6 +198,13 @@ static inline void virtqueue_napi_schedule(struct napi_struct *napi, } } +#include "xsk.h" + +static inline bool is_skb_ptr (void *ptr) +{ +return !((unsigned long )ptr & (VIRTIO_XDP_FLAG |VIRTIO_XSK_FLAG )); +} +static inline bool is_xdp_frame (void *ptr) {return (unsigned long )ptr &VIRTIO_XDP_FLAG ;@@ -206,25 +223,39 @@ static inline struct xdp_frame *ptr_to_xdp(void *ptr)static inline void __free_old_xmit (struct send_queue *sq,bool in_napi,struct virtnet_sq_stats *stats) { +unsigned int xsknum =0 ;unsigned int len;void *ptr;while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (!is_xdp_frame (ptr)) { +if (is_skb_ptr (ptr)) {struct sk_buff *skb = ptr;pr_debug ("Sent skb %p\n" , skb); stats->bytes += skb->len;napi_consume_skb (skb, in_napi); - }else { + }else if (is_xdp_frame (ptr)) {struct xdp_frame *frame =ptr_to_xdp (ptr); stats->bytes += frame->len;xdp_return_frame (frame); + }else { +struct virtnet_xsk_ctx_tx *ctx; + + ctx =ptr_to_xsk (ptr); + +/* Maybe this ptr was sent by the last xsk. */ +if (ctx->ctx.head->active) + ++xsknum; + + stats->bytes += ctx->len; +virtnet_xsk_ctx_tx_put (ctx); } stats->packets++; } -} +if (xsknum) +virtnet_xsk_complete (sq, xsknum); +}#endif drivers/net/virtio/xsk.c new file +89
-0@@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* virtio-net xsk +*/ + +#include "virtio_net.h" + +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr; + +static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get (struct virtnet_xsk_ctx_head *head) +{ +struct virtnet_xsk_ctx *ctx; + + ctx = head->ctx; + head->ctx = ctx->next; + + ++head->ref; + +return ctx; +} + +#define virtnet_xsk_ctx_tx_get (head) ((struct virtnet_xsk_ctx_tx *)virtnet_xsk_ctx_get(head)) + +static void virtnet_xsk_check_queue (struct send_queue *sq) +{ +struct virtnet_info *vi = sq->vq->vdev->priv; +struct net_device *dev = vi->dev; +int qnum = sq - vi->sq; + +/* If it is a raw buffer queue, it does not check whether the status +* of the queue is stopped when sending. So there is no need to check +* the situation of the raw buffer queue. +*/ +if (is_xdp_raw_buffer_queue (vi, qnum)) +return ; + +/* If this sq is not the exclusive queue of the current cpu, +* then it may be called by start_xmit, so check it running out +* of space. +* +* Stop the queue to avoid getting packets that we are +* then unable to transmit. Then wait the tx interrupt. +*/ +if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) +netif_stop_subqueue (dev, qnum); +} + +void virtnet_xsk_complete (struct send_queue *sq,u32 num) +{ +struct xsk_buff_pool *pool; + +rcu_read_lock (); + pool =rcu_dereference (sq->xsk.pool); +if (!pool) { +rcu_read_unlock (); +return ; + } +xsk_tx_completed (pool, num); +rcu_read_unlock (); + +if (sq->xsk.need_wakeup) { + sq->xsk.need_wakeup = false; +virtqueue_napi_schedule (&sq->napi, sq->vq); + } +} + +static int virtnet_xsk_xmit (struct send_queue *sq,struct xsk_buff_pool *pool, +struct xdp_desc *desc) +{ +struct virtnet_xsk_ctx_tx *ctx; +struct virtnet_info *vi; +u32 offset, n, len; +struct page *page; +void *data; + + vi = sq->vq->vdev->priv; + + data =xsk_buff_raw_get_data (pool, desc->addr); + offset =offset_in_page (data); + + ctx =virtnet_xsk_ctx_tx_get (sq->xsk.ctx_head); + +/* xsk unaligned mode, desc may use two pages */ +if (desc->len >PAGE_SIZE - offset) + n =3 ; +else + n =2 ; + +sg_init_table (sq->sg, n);
drivers/net/virtio/xsk.c line 99
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+sg_set_buf (sq->sg, &xsk_hdr, vi->hdr_len); + +/* handle for xsk first page */ + len =min_t (int, desc->len,PAGE_SIZE - offset); + page =vmalloc_to_page (data); +sg_set_page (sq->sg +1 , page, len, offset); + +/* ctx is used to record and reference this page to prevent xsk from +* being released before this xmit is recycled +*/
I'm a little bit surprised that this is done manually per device instead of doing it in xsk core.
Quoted 21 lines
drivers/net/virtio/xsk.c new file +21
-0+ ctx->ctx.page = page; +get_page (page); + +/* xsk unaligned mode, handle for the second page */ +if (len < desc->len) { + page =vmalloc_to_page (data + len); + len =min_t (int, desc->len - len,PAGE_SIZE ); +sg_set_page (sq->sg +2 , page, len,0 ); + + ctx->ctx.page_unaligned = page; +get_page (page); + }else { + ctx->ctx.page_unaligned =NULL ; + } + +return virtqueue_add_outbuf (sq->vq, sq->sg, n, +xsk_to_ptr (ctx),GFP_ATOMIC ); +} + +static int virtnet_xsk_xmit_batch(struct send_queue *sq, + struct xsk_buff_pool *pool,
drivers/net/virtio/xsk.c line 130
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+unsigned int budget, + bool in_napi, int *done, + struct virtnet_sq_stats *stats) +{ + struct xdp_desc desc; +int err, packet =0 ; +int ret = -EAGAIN ; + +while (budget-- >0 ) { +if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) {
AF_XDP doesn't use skb, so I don't see why MAX_SKB_FRAGS is used.
Looking at virtnet_xsk_xmit(), it looks to me 3 is more suitable here. Or did AF_XDP core can handle queue full gracefully then we don't even need to worry about this?
drivers/net/virtio/xsk.c line 131
Quoted 1 line
drivers/net/virtio/xsk.c new file +1
-0+ ret = -EBUSY ;
-ENOSPC looks better.
drivers/net/virtio/xsk.c line 142
Quoted 11 lines
drivers/net/virtio/xsk.c new file +11
-0+break ; + } + +if (!xsk_tx_peek_desc (pool, &desc)) { +/* done */ + ret =0 ; +break ; + } + + err =virtnet_xsk_xmit (sq, pool, &desc); +if (unlikely (err)) {
If we always reserve sufficient slots, this should be an unexpected error, do we need log this as what has been done in start_xmit()?
/* This should not happen! */
if (unlikely(err)) {
dev->stats.tx_fifo_errors++;
if (net_ratelimit())
dev_warn(&dev->dev,
"Unexpected TXQ (%d) queue failure: %d\n", qnum, err);
Quoted 25 lines
drivers/net/virtio/xsk.c new file +25
-0+ ret = -EBUSY ; +break ; + } + + ++packet; + } + +if (packet) { +if (virtqueue_kick_prepare (sq->vq) &&virtqueue_notify (sq->vq)) + ++stats->kicks; + + *done += packet; + stats->xdp_tx += packet; + +xsk_tx_release (pool); + } + +return ret; +} + +static int virtnet_xsk_run (struct send_queue *sq,struct xsk_buff_pool *pool, +int budget,bool in_napi) +{ +struct virtnet_sq_stats stats = {}; +int done =0 ;
drivers/net/virtio/xsk.c line 177
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+int err; + + sq->xsk.need_wakeup = false; +__free_old_xmit (sq, in_napi, &stats); + +/* return err: +* -EAGAIN: done == budget +* -EBUSY: done < budget +* 0 : done < budget +*/
It's better to move the comment to the implementation of virtnet_xsk_xmit_batch().
drivers/net/virtio/xsk.c line 185
Quoted 8 lines
drivers/net/virtio/xsk.c new file +8
-0+xmit: + err =virtnet_xsk_xmit_batch (sq, pool, budget - done, in_napi, + &done, &stats); +if (err == -EBUSY ) { +__free_old_xmit (sq, in_napi, &stats); + +/* If the space is enough, let napi run again. */ +if (sq->vq->num_free >=2 +MAX_SKB_FRAGS )
The comment does not match the code.
Quoted 31 lines
drivers/net/virtio/xsk.c new file +31
-0+ goto xmit; + else + sq->xsk.need_wakeup = true; + } + +virtnet_xsk_check_queue (sq); + +u64_stats_update_begin (&sq->stats.syncp); + sq->stats.packets += stats.packets; + sq->stats.bytes += stats.bytes; + sq->stats.kicks += stats.kicks; + sq->stats.xdp_tx += stats.xdp_tx; +u64_stats_update_end (&sq->stats.syncp); + +return done; +} + +int virtnet_poll_xsk (struct send_queue *sq,int budget) +{ +struct xsk_buff_pool *pool; +int work_done =0 ; + +rcu_read_lock (); + pool =rcu_dereference (sq->xsk.pool); +if (pool) + work_done =virtnet_xsk_run (sq, pool, budget, true); +rcu_read_unlock (); +return work_done; +} + +int virtnet_xsk_wakeup (struct net_device *dev,u32 qid,u32 flag)
drivers/net/virtio/xsk.c line 226
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+{ +struct virtnet_info *vi =netdev_priv (dev); +struct xsk_buff_pool *pool; +struct send_queue *sq; + +if (!netif_running (dev)) +return -ENETDOWN ; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ;
I wonder how we can hit this check. Note that we prevent the user from modifying queue pairs when XDP is enabled:
/* For now we don't support modifying channels while XDP is loaded
* also when XDP is loaded all RX queues have XDP programs so we only
* need to check a single RX queue.
*/
if (vi->rq[0].xdp_prog)
return -EINVAL;
drivers/net/virtio/xsk.c line 230
Quoted 4 lines
drivers/net/virtio/xsk.c new file +4
-0+ + sq = &vi->sq[qid]; + +rcu_read_lock ();
Can we simply use rcu_read_lock_bh() here?
Quoted 124 lines
drivers/net/virtio/xsk.c new file +116
-0+ pool =rcu_dereference (sq->xsk.pool); +if (pool) { +local_bh_disable (); +virtqueue_napi_schedule (&sq->napi, sq->vq); +local_bh_enable (); + } +rcu_read_unlock (); +return 0 ; +} + +static struct virtnet_xsk_ctx_head *virtnet_xsk_ctx_alloc (struct xsk_buff_pool *pool, +struct virtqueue *vq) +{ +struct virtnet_xsk_ctx_head *head; +u32 size, n, ring_size, ctx_sz; +struct virtnet_xsk_ctx *ctx; +void *p; + + ctx_sz =sizeof (struct virtnet_xsk_ctx_tx ); + + ring_size =virtqueue_get_vring_size (vq); + size =sizeof (*head) + ctx_sz * ring_size; + + head =kmalloc (size,GFP_ATOMIC ); +if (!head) +return NULL ; + +memset (head,0 ,sizeof (*head)); + + head->active = true; + head->frame_size =xsk_pool_get_rx_frame_size (pool); + + p = head +1 ; +for (n =0 ; n < ring_size; ++n) { + ctx = p; + ctx->head = head; + ctx->next = head->ctx; + head->ctx = ctx; + + p += ctx_sz; + } + +return head; +} + +static int virtnet_xsk_pool_enable (struct net_device *dev, +struct xsk_buff_pool *pool, +u16 qid) +{ +struct virtnet_info *vi =netdev_priv (dev); +struct send_queue *sq; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ; + + sq = &vi->sq[qid]; + +/* xsk zerocopy depend on the tx napi. +* +* All data is actually consumed and sent out from the xsk tx queue +* under the tx napi mechanism. +*/ +if (!sq->napi.weight) +return -EPERM ; + +memset (&sq->xsk,0 ,sizeof (sq->xsk)); + + sq->xsk.ctx_head =virtnet_xsk_ctx_alloc (pool, sq->vq); +if (!sq->xsk.ctx_head) +return -ENOMEM ; + +/* Here is already protected by rtnl_lock, so rcu_assign_pointer is +* safe. +*/ +rcu_assign_pointer (sq->xsk.pool, pool); + +return 0 ; +} + +static int virtnet_xsk_pool_disable (struct net_device *dev,u16 qid) +{ +struct virtnet_info *vi =netdev_priv (dev); +struct send_queue *sq; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ; + + sq = &vi->sq[qid]; + +/* Here is already protected by rtnl_lock, so rcu_assign_pointer is +* safe. +*/ +rcu_assign_pointer (sq->xsk.pool,NULL ); + +/* Sync with the XSK wakeup and with NAPI. */ +synchronize_net (); + +if (READ_ONCE (sq->xsk.ctx_head->ref)) +WRITE_ONCE (sq->xsk.ctx_head->active, false); +else +kfree (sq->xsk.ctx_head); + + sq->xsk.ctx_head =NULL ; + +return 0 ; +} + +int virtnet_xsk_pool_setup (struct net_device *dev,struct netdev_bpf *xdp) +{ +if (xdp->xsk.pool) +return virtnet_xsk_pool_enable (dev, xdp->xsk.pool, + xdp->xsk.queue_id); +else +return virtnet_xsk_pool_disable (dev, xdp->xsk.queue_id); +} +drivers/net/virtio/xsk.h new file +2
-0@@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +
drivers/net/virtio/xsk.h line 12
Quoted 10 lines
drivers/net/virtio/xsk.h new file +10
-0+#ifndef __XSK_H__ +#define __XSK_H__ + +#define VIRTIO_XSK_FLAG BIT(1) + +/* When xsk disable, under normal circumstances, the network card must reclaim +* all the memory that has been sent and the memory added to the rq queue by +* destroying the queue. +* +* But virtio's queue does not support separate setting to been disable.
This is a call for us to implement per queue enable/disable. Virtio-mmio has such facility but virtio-pci only allow to disable a queue (not enable).
Quoted 10 lines
"Reset"
+ * is not very suitable.
+ *
+ * The method here is that each sent chunk or chunk added to the rq queue is
+ * described by an independent structure structvirtnet_xsk_ctx.
+ *
+ * We will useget_page(page)to refer to the page where these chunks are
+ * located. And these pages will be recorded in structvirtnet_xsk_ctx. So these
+ * chunks in vq are safe. When recycling, put the these page.
+ *
Quoted 8 lines
+ * These structures point to struct
virtnet_xsk_ctx_head, and ref records how
+ * many chunks have not been reclaimed. If active == 0, it means that xsk has
+ * been disabled.
+ *
+ * In this way, even if xsk has been unbundled with rq/sq, or a new xsk and
+ * rq/sq are bound, and a newvirtnet_xsk_ctx_headis created. It will not
+ * affect the oldvirtnet_xsk_ctxto be recycled. And free all head and ctx when
+ * ref is 0.
This looks complicated and it will increase the footprint. Consider the performance penalty and the complexity, I would suggest to use reset instead.
Then we don't need to introduce such context.
Thanks
Quoted 70 lines
+ */
drivers/net/virtio/xsk.h new file +69
-0+struct virtnet_xsk_ctx ; +struct virtnet_xsk_ctx_head { +struct virtnet_xsk_ctx *ctx; + +/* how many ctx has been add to vq */ +u64 ref; + +unsigned int frame_size; + +/* the xsk status */ +bool active; +}; + +struct virtnet_xsk_ctx { +struct virtnet_xsk_ctx_head *head; +struct virtnet_xsk_ctx *next; + +struct page *page; + +/* xsk unaligned mode will use two page in one desc */ +struct page *page_unaligned; +}; + +struct virtnet_xsk_ctx_tx { +/* this *MUST* be the first */ +struct virtnet_xsk_ctx ctx; + +/* xsk tx xmit use this record the len of packet */ +u32 len; +}; + +static inline void *xsk_to_ptr (struct virtnet_xsk_ctx_tx *ctx) +{ +return (void *)((unsigned long )ctx |VIRTIO_XSK_FLAG ); +} + +static inline struct virtnet_xsk_ctx_tx *ptr_to_xsk (void *ptr) +{ +unsigned long p; + + p = (unsigned long )ptr; +return (struct virtnet_xsk_ctx_tx *)(p & ~VIRTIO_XSK_FLAG ); +} + +static inline void virtnet_xsk_ctx_put (struct virtnet_xsk_ctx *ctx) +{ +put_page (ctx->page); +if (ctx->page_unaligned) +put_page (ctx->page_unaligned); + + --ctx->head->ref; + +if (ctx->head->active) { + ctx->next = ctx->head->ctx; + ctx->head->ctx = ctx; + }else { +if (!ctx->head->ref) +kfree (ctx->head); + } +} + +#define virtnet_xsk_ctx_tx_put (ctx) \ + virtnet_xsk_ctx_put((struct virtnet_xsk_ctx *)ctx) + +int virtnet_xsk_wakeup (struct net_device *dev,u32 qid,u32 flag); +int virtnet_poll_xsk (struct send_queue *sq,int budget); +void virtnet_xsk_complete (struct send_queue *sq,u32 num); +int virtnet_xsk_pool_setup (struct net_device *dev,struct netdev_bpf *xdp); +#endif
Re: [PATCH net-next v5 12/15] virtio-net: support AF_XDP zc tx
Quoted 310 lines · Jason Wang
Quoted 71 lines · Xuan Zhuo
AF_XDP(xdp socket, xsk)is a high-performance packet receiving and sending technology.This patch implements the binding and unbinding operations of xsk and the virtio-net queue for xsk zero copy xmit.
The xsk zero copy xmit depends on tx napi. Because the actual sending of data is done in the process of tx napi. If tx napi does not work, then the data of the xsk tx queue will not be sent. So if tx napi is not true, an error will be reported when bind xsk.
If xsk is active, it will prevent ethtool from modifying tx napi.
When reclaiming ptr, a new type of ptr is added, which is distinguished based on the last two digits of ptr:
00: skb
01: xdp frame
10: xsk xmit ptrAll sent xsk packets share the virtio-net header of
xsk_hdr. If xsk needs to support csum and other functions later, consider assigning xsk hdr separately for each sent packet.Different from other physical network cards, you can reinitialize the channel when you bind xsk. And vrtio does not support independent reset channel, you can only reset the entire device. I think it is not appropriate for us to directly reset the entire setting. So the situation becomes a bit more complicated. We have to consider how to deal with the buffer referenced in vq after xsk is unbind.
I added the ring size struct
virtnet_xsk_ctxwhen xsk been bind. Each xsk buffer added to vq corresponds to a ctx. This ctx is used to record the page where the xsk buffer is located, and add a page reference. When the buffer is recycling, reduce the reference to page. When xsk has been unbind, and all related xsk buffers have been recycled, release all ctx.Signed-off-by Xuan Zhuo <[email protected]>Reviewed-by Dust Li <[email protected]>--- drivers/net/virtio/Makefile | 1 + drivers/net/virtio/virtio_net.c | 20 +- drivers/net/virtio/virtio_net.h | 37 +++- drivers/net/virtio/xsk.c | 346 ++++++++++++++++++++++++++++++++ drivers/net/virtio/xsk.h | 99 +++++++++ 5 files changed, 497 insertions(+), 6 deletions(-)create mode 100644
drivers/net/virtio/xsk.c
create mode 100644drivers/net/virtio/xsk.hdrivers/net/virtio/Makefile +1
-0@@ -4,3 +4,4 @@ # obj-$(CONFIG_VIRTIO_NET) += virtio_net.o +obj-$(CONFIG_VIRTIO_NET) += xsk.odrivers/net/virtio/virtio_net.c +1
-0@@ -1423,6 +1423,7 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget) txq =netdev_get_tx_queue (vi->dev, index);__netif_tx_lock (txq,raw_smp_processor_id ()); + work_done +=virtnet_poll_xsk (sq, budget);free_old_xmit (sq, true);__netif_tx_unlock (txq);@@ -2133,8 +2134,16 @@ static int virtnet_set_coalesce(struct net_device *dev,if (napi_weight ^ vi->sq[0 ].napi.weight) {drivers/net/virtio/virtio_net.c static int virtnet_set_coalesce(struct net_device *dev, · line 2143
Quoted 10 lines
drivers/net/virtio/virtio_net.c +7
-1if (dev->flags &IFF_UP )return -EBUSY ; -for (i =0 ; i < vi->max_queue_pairs; i++) + +for (i =0 ; i < vi->max_queue_pairs; i++) { +/* xsk xmit depend on the tx napi. So if xsk is active, +* prevent modifications to tx napi. +*/ +if (rtnl_dereference (vi->sq[i].xsk.pool)) +continue ;So this can result tx NAPI is used by some queues buy not the others. I think such inconsistency breaks the semantic of
set_coalesce()which assumes the operation is done at the device not some specific queues.How about just fail here?
Quoted 217 lines
drivers/net/virtio/virtio_net.c +9
-2+ vi->sq[i].napi.weight = napi_weight; + } }return 0 ;@@ -2407,6 +2416,8 @@ static int virtnet_xdp(struct net_device *dev, struct netdev_bpf *xdp)switch (xdp->command) {case XDP_SETUP_PROG :return virtnet_xdp_set (dev, xdp->prog, xdp->extack); +case XDP_SETUP_XSK_POOL : +return virtnet_xsk_pool_setup (dev, xdp);default :return -EINVAL ; }@@ -2466,6 +2477,7 @@ static const struct net_device_ops virtnet_netdev = { .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, .ndo_bpf = virtnet_xdp, .ndo_xdp_xmit = virtnet_xdp_xmit, + .ndo_xsk_wakeup = virtnet_xsk_wakeup, .ndo_features_check = passthru_features_check, .ndo_get_phys_port_name = virtnet_get_phys_port_name, .ndo_set_features = virtnet_set_features,@@ -2569,10 +2581,12 @@ static void free_unused_bufs(struct virtnet_info *vi)for (i =0 ; i < vi->max_queue_pairs; i++) {struct virtqueue *vq = vi->sq[i].vq;while ((buf =virtqueue_detach_unused_buf (vq)) !=NULL ) { -if (!is_xdp_frame (buf)) +if (is_skb_ptr (buf))dev_kfree_skb (buf); -else +else if (is_xdp_frame (buf))xdp_return_frame (ptr_to_xdp (buf)); +else +virtnet_xsk_ctx_tx_put (ptr_to_xsk (buf)); } }drivers/net/virtio/virtio_net.h +34
-3@@ -135,6 +135,16 @@ struct send_queue {struct virtnet_sq_stats stats;struct napi_struct napi; + +struct { +struct xsk_buff_pool __rcu *pool; + +/* xsk wait for tx inter or softirq */ +bool need_wakeup; + +/* ctx used to record the page added to vq */ +struct virtnet_xsk_ctx_head *ctx_head; + } xsk; };/* Internal representation of a receive virtqueue */ @@ -188,6 +198,13 @@ static inline void virtqueue_napi_schedule(struct napi_struct *napi, } } +#include "xsk.h" + +static inline bool is_skb_ptr (void *ptr) +{ +return !((unsigned long )ptr & (VIRTIO_XDP_FLAG |VIRTIO_XSK_FLAG )); +} +static inline bool is_xdp_frame (void *ptr) {return (unsigned long )ptr &VIRTIO_XDP_FLAG ;@@ -206,25 +223,39 @@ static inline struct xdp_frame *ptr_to_xdp(void *ptr)static inline void __free_old_xmit (struct send_queue *sq,bool in_napi,struct virtnet_sq_stats *stats) { +unsigned int xsknum =0 ;unsigned int len;void *ptr;while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (!is_xdp_frame (ptr)) { +if (is_skb_ptr (ptr)) {struct sk_buff *skb = ptr;pr_debug ("Sent skb %p\n" , skb); stats->bytes += skb->len;napi_consume_skb (skb, in_napi); - }else { + }else if (is_xdp_frame (ptr)) {struct xdp_frame *frame =ptr_to_xdp (ptr); stats->bytes += frame->len;xdp_return_frame (frame); + }else { +struct virtnet_xsk_ctx_tx *ctx; + + ctx =ptr_to_xsk (ptr); + +/* Maybe this ptr was sent by the last xsk. */ +if (ctx->ctx.head->active) + ++xsknum; + + stats->bytes += ctx->len; +virtnet_xsk_ctx_tx_put (ctx); } stats->packets++; } -} +if (xsknum) +virtnet_xsk_complete (sq, xsknum); +}#endif drivers/net/virtio/xsk.c new file +95
-0@@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* virtio-net xsk +*/ + +#include "virtio_net.h" + +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr; + +static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get (struct virtnet_xsk_ctx_head *head) +{ +struct virtnet_xsk_ctx *ctx; + + ctx = head->ctx; + head->ctx = ctx->next; + + ++head->ref; + +return ctx; +} + +#define virtnet_xsk_ctx_tx_get (head) ((struct virtnet_xsk_ctx_tx *)virtnet_xsk_ctx_get(head)) + +static void virtnet_xsk_check_queue (struct send_queue *sq) +{ +struct virtnet_info *vi = sq->vq->vdev->priv; +struct net_device *dev = vi->dev; +int qnum = sq - vi->sq; + +/* If it is a raw buffer queue, it does not check whether the status +* of the queue is stopped when sending. So there is no need to check +* the situation of the raw buffer queue. +*/ +if (is_xdp_raw_buffer_queue (vi, qnum)) +return ; + +/* If this sq is not the exclusive queue of the current cpu, +* then it may be called by start_xmit, so check it running out +* of space. +* +* Stop the queue to avoid getting packets that we are +* then unable to transmit. Then wait the tx interrupt. +*/ +if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) +netif_stop_subqueue (dev, qnum); +} + +void virtnet_xsk_complete (struct send_queue *sq,u32 num) +{ +struct xsk_buff_pool *pool; + +rcu_read_lock (); + pool =rcu_dereference (sq->xsk.pool); +if (!pool) { +rcu_read_unlock (); +return ; + } +xsk_tx_completed (pool, num); +rcu_read_unlock (); + +if (sq->xsk.need_wakeup) { + sq->xsk.need_wakeup = false; +virtqueue_napi_schedule (&sq->napi, sq->vq); + } +} + +static int virtnet_xsk_xmit (struct send_queue *sq,struct xsk_buff_pool *pool, +struct xdp_desc *desc) +{ +struct virtnet_xsk_ctx_tx *ctx; +struct virtnet_info *vi; +u32 offset, n, len; +struct page *page; +void *data; + + vi = sq->vq->vdev->priv; + + data =xsk_buff_raw_get_data (pool, desc->addr); + offset =offset_in_page (data); + + ctx =virtnet_xsk_ctx_tx_get (sq->xsk.ctx_head); + +/* xsk unaligned mode, desc may use two pages */ +if (desc->len >PAGE_SIZE - offset) + n =3 ; +else + n =2 ; + +sg_init_table (sq->sg, n); +sg_set_buf (sq->sg, &xsk_hdr, vi->hdr_len); + +/* handle for xsk first page */ + len =min_t (int, desc->len,PAGE_SIZE - offset); + page =vmalloc_to_page (data); +sg_set_page (sq->sg +1 , page, len, offset);
Quoted 8 lines
drivers/net/virtio/xsk.c line 99
Quoted 4 lines
drivers/net/virtio/xsk.c new file +4
-0+ +/* ctx is used to record and reference this page to prevent xsk from +* being released before this xmit is recycled +*/ I'm a little bit surprised that this is done manually per device instead of doing it in xsk core.
The pages that the data pointer points to are pinned by the xsk core so they will not be released until the socket dies. In this case, we will do a synchronize_net() to wait for the driver to stop using the socket (and any pages), then start cleaning everything up. During this clean up, ndo_bpf is called with the command XDP_SETUP_XSK_POOL with a NULL pool pointer which means that the driver should tear the zero copy path down and not use it anymore. Not until after that has completed, is the umem memory with all its packet buffers released. Do not see why this extra refcounting is needed, but might have missed something of course. Is there something special with the virtio-net driver we need to take care about in this context?
Quoted 36 lines
Quoted 22 lines
drivers/net/virtio/xsk.c new file +21
-0+ ctx->ctx.page = page; +get_page (page); + +/* xsk unaligned mode, handle for the second page */ +if (len < desc->len) { + page =vmalloc_to_page (data + len); + len =min_t (int, desc->len - len,PAGE_SIZE ); +sg_set_page (sq->sg +2 , page, len,0 ); + + ctx->ctx.page_unaligned = page; +get_page (page); + }else { + ctx->ctx.page_unaligned =NULL ; + } + +return virtqueue_add_outbuf (sq->vq, sq->sg, n, +xsk_to_ptr (ctx),GFP_ATOMIC ); +} + +static int virtnet_xsk_xmit_batch(struct send_queue *sq, + struct xsk_buff_pool *pool,drivers/net/virtio/xsk.c line 130
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+unsigned int budget, + bool in_napi, int *done, + struct virtnet_sq_stats *stats) +{ + struct xdp_desc desc; +int err, packet =0 ; +int ret = -EAGAIN ; + +while (budget-- >0 ) { +if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) {
AF_XDPdoesn't use skb, so I don't see whyMAX_SKB_FRAGSis used.
Quoted 3 lines
Looking at
virtnet_xsk_xmit(), it looks to me 3 is more suitable here. Or didAF_XDPcore can handle queue full gracefully then we don't even need to worry about this?
We need to make sure that there is enough space in the outgoing queue / HW Tx ring somewhere. The easiest place to do this is before you get the next packet from the Tx ring, as you would have to return it if there was not enough space. Note that we do not have a function for returning a packet to the Tx ring at the moment and I would like to avoid adding one. As Jason says, no reason to test for anything skb here. The zero-copy path never uses skbs, unless you get an XDP_PASS from an XDP program.
Quoted 309 lines
drivers/net/virtio/xsk.c line 131
Quoted 2 lines
drivers/net/virtio/xsk.c new file +1
-0+ ret = -EBUSY ;
-ENOSPClooks better.drivers/net/virtio/xsk.c line 142
Quoted 11 lines
drivers/net/virtio/xsk.c new file +11
-0+break ; + } + +if (!xsk_tx_peek_desc (pool, &desc)) { +/* done */ + ret =0 ; +break ; + } + + err =virtnet_xsk_xmit (sq, pool, &desc); +if (unlikely (err)) {If we always reserve sufficient slots, this should be an unexpected error, do we need log this as what has been done in
start_xmit()?/* This should not happen! */ if (unlikely(err)) { dev->stats.tx_fifo_errors++; if (net_ratelimit()) dev_warn(&dev->dev, "Unexpected TXQ (%d) queue failure: %d\n", qnum, err);Quoted 25 lines
drivers/net/virtio/xsk.c new file +25
-0+ ret = -EBUSY ; +break ; + } + + ++packet; + } + +if (packet) { +if (virtqueue_kick_prepare (sq->vq) &&virtqueue_notify (sq->vq)) + ++stats->kicks; + + *done += packet; + stats->xdp_tx += packet; + +xsk_tx_release (pool); + } + +return ret; +} + +static int virtnet_xsk_run (struct send_queue *sq,struct xsk_buff_pool *pool, +int budget,bool in_napi) +{ +struct virtnet_sq_stats stats = {}; +int done =0 ;drivers/net/virtio/xsk.c line 177
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+int err; + + sq->xsk.need_wakeup = false; +__free_old_xmit (sq, in_napi, &stats); + +/* return err: +* -EAGAIN: done == budget +* -EBUSY: done < budget +* 0 : done < budget +*/ It's better to move the comment to the implementation of
virtnet_xsk_xmit_batch().drivers/net/virtio/xsk.c line 185
Quoted 8 lines
drivers/net/virtio/xsk.c new file +8
-0+xmit: + err =virtnet_xsk_xmit_batch (sq, pool, budget - done, in_napi, + &done, &stats); +if (err == -EBUSY ) { +__free_old_xmit (sq, in_napi, &stats); + +/* If the space is enough, let napi run again. */ +if (sq->vq->num_free >=2 +MAX_SKB_FRAGS )The comment does not match the code.
Quoted 31 lines
drivers/net/virtio/xsk.c new file +31
-0+ goto xmit; + else + sq->xsk.need_wakeup = true; + } + +virtnet_xsk_check_queue (sq); + +u64_stats_update_begin (&sq->stats.syncp); + sq->stats.packets += stats.packets; + sq->stats.bytes += stats.bytes; + sq->stats.kicks += stats.kicks; + sq->stats.xdp_tx += stats.xdp_tx; +u64_stats_update_end (&sq->stats.syncp); + +return done; +} + +int virtnet_poll_xsk (struct send_queue *sq,int budget) +{ +struct xsk_buff_pool *pool; +int work_done =0 ; + +rcu_read_lock (); + pool =rcu_dereference (sq->xsk.pool); +if (pool) + work_done =virtnet_xsk_run (sq, pool, budget, true); +rcu_read_unlock (); +return work_done; +} + +int virtnet_xsk_wakeup (struct net_device *dev,u32 qid,u32 flag)drivers/net/virtio/xsk.c line 226
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+{ +struct virtnet_info *vi =netdev_priv (dev); +struct xsk_buff_pool *pool; +struct send_queue *sq; + +if (!netif_running (dev)) +return -ENETDOWN ; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ;I wonder how we can hit this check. Note that we prevent the user from modifying queue pairs when XDP is enabled:
/* For now we don't support modifying channels while XDP is loaded
* also when XDP is loaded all RX queues have XDP programs so
we only* need to check a single RX queue. */ if (vi->rq[0].xdp_prog) return -EINVAL;drivers/net/virtio/xsk.c line 230
Quoted 4 lines
drivers/net/virtio/xsk.c new file +4
-0+ + sq = &vi->sq[qid]; + +rcu_read_lock ();Can we simply use
rcu_read_lock_bh()here?Quoted 124 lines
drivers/net/virtio/xsk.c new file +116
-0+ pool =rcu_dereference (sq->xsk.pool); +if (pool) { +local_bh_disable (); +virtqueue_napi_schedule (&sq->napi, sq->vq); +local_bh_enable (); + } +rcu_read_unlock (); +return 0 ; +} + +static struct virtnet_xsk_ctx_head *virtnet_xsk_ctx_alloc (struct xsk_buff_pool *pool, +struct virtqueue *vq) +{ +struct virtnet_xsk_ctx_head *head; +u32 size, n, ring_size, ctx_sz; +struct virtnet_xsk_ctx *ctx; +void *p; + + ctx_sz =sizeof (struct virtnet_xsk_ctx_tx ); + + ring_size =virtqueue_get_vring_size (vq); + size =sizeof (*head) + ctx_sz * ring_size; + + head =kmalloc (size,GFP_ATOMIC ); +if (!head) +return NULL ; + +memset (head,0 ,sizeof (*head)); + + head->active = true; + head->frame_size =xsk_pool_get_rx_frame_size (pool); + + p = head +1 ; +for (n =0 ; n < ring_size; ++n) { + ctx = p; + ctx->head = head; + ctx->next = head->ctx; + head->ctx = ctx; + + p += ctx_sz; + } + +return head; +} + +static int virtnet_xsk_pool_enable (struct net_device *dev, +struct xsk_buff_pool *pool, +u16 qid) +{ +struct virtnet_info *vi =netdev_priv (dev); +struct send_queue *sq; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ; + + sq = &vi->sq[qid]; + +/* xsk zerocopy depend on the tx napi. +* +* All data is actually consumed and sent out from the xsk tx queue +* under the tx napi mechanism. +*/ +if (!sq->napi.weight) +return -EPERM ; + +memset (&sq->xsk,0 ,sizeof (sq->xsk)); + + sq->xsk.ctx_head =virtnet_xsk_ctx_alloc (pool, sq->vq); +if (!sq->xsk.ctx_head) +return -ENOMEM ; + +/* Here is already protected by rtnl_lock, so rcu_assign_pointer is +* safe. +*/ +rcu_assign_pointer (sq->xsk.pool, pool); + +return 0 ; +} + +static int virtnet_xsk_pool_disable (struct net_device *dev,u16 qid) +{ +struct virtnet_info *vi =netdev_priv (dev); +struct send_queue *sq; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ; + + sq = &vi->sq[qid]; + +/* Here is already protected by rtnl_lock, so rcu_assign_pointer is +* safe. +*/ +rcu_assign_pointer (sq->xsk.pool,NULL ); + +/* Sync with the XSK wakeup and with NAPI. */ +synchronize_net (); + +if (READ_ONCE (sq->xsk.ctx_head->ref)) +WRITE_ONCE (sq->xsk.ctx_head->active, false); +else +kfree (sq->xsk.ctx_head); + + sq->xsk.ctx_head =NULL ; + +return 0 ; +} + +int virtnet_xsk_pool_setup (struct net_device *dev,struct netdev_bpf *xdp) +{ +if (xdp->xsk.pool) +return virtnet_xsk_pool_enable (dev, xdp->xsk.pool, + xdp->xsk.queue_id); +else +return virtnet_xsk_pool_disable (dev, xdp->xsk.queue_id); +} +drivers/net/virtio/xsk.h new file +2
-0@@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +drivers/net/virtio/xsk.h line 12
Quoted 10 lines
drivers/net/virtio/xsk.h new file +10
-0+#ifndef __XSK_H__ +#define __XSK_H__ + +#define VIRTIO_XSK_FLAG BIT(1) + +/* When xsk disable, under normal circumstances, the network card must reclaim +* all the memory that has been sent and the memory added to the rq queue by +* destroying the queue. +* +* But virtio's queue does not support separate setting to been disable. This is a call for us to implement per queue enable/disable. Virtio-mmio has such facility but virtio-pci only allow to disable a queue (not enable).
Quoted 10 lines
"Reset"
+ * is not very suitable.
+ *
+ * The method here is that each sent chunk or chunk added to the rq queue is
+ * described by an independent structure structvirtnet_xsk_ctx.
+ *
+ * We will useget_page(page)to refer to the page where these chunks are
+ * located. And these pages will be recorded in structvirtnet_xsk_ctx. So these
+ * chunks in vq are safe. When recycling, put the these page.
+ *Quoted 8 lines
+ * These structures point to struct
virtnet_xsk_ctx_head, and ref records how
+ * many chunks have not been reclaimed. If active == 0, it means that xsk has
+ * been disabled.
+ *
+ * In this way, even if xsk has been unbundled with rq/sq, or a new xsk and
+ * rq/sq are bound, and a newvirtnet_xsk_ctx_headis created. It will not
+ * affect the oldvirtnet_xsk_ctxto be recycled. And free all head and ctx when
+ * ref is 0.
Quoted 3 lines
This looks complicated and it will increase the footprint. Consider the performance penalty and the complexity, I would suggest to use reset instead.
OK, this explains your reference counting previously. Let us keep it simple as Jason suggests. If you need anything from the core xsk code, just let me know. You are the first one to implement AF_XDP zero-copy on a virtual device, so new requirements might pop up.
Thanks for working on this!
Quoted 76 lines
Then we don't need to introduce such context.
Thanks
Quoted 70 lines
+ */
drivers/net/virtio/xsk.h new file +69
-0+struct virtnet_xsk_ctx ; +struct virtnet_xsk_ctx_head { +struct virtnet_xsk_ctx *ctx; + +/* how many ctx has been add to vq */ +u64 ref; + +unsigned int frame_size; + +/* the xsk status */ +bool active; +}; + +struct virtnet_xsk_ctx { +struct virtnet_xsk_ctx_head *head; +struct virtnet_xsk_ctx *next; + +struct page *page; + +/* xsk unaligned mode will use two page in one desc */ +struct page *page_unaligned; +}; + +struct virtnet_xsk_ctx_tx { +/* this *MUST* be the first */ +struct virtnet_xsk_ctx ctx; + +/* xsk tx xmit use this record the len of packet */ +u32 len; +}; + +static inline void *xsk_to_ptr (struct virtnet_xsk_ctx_tx *ctx) +{ +return (void *)((unsigned long )ctx |VIRTIO_XSK_FLAG ); +} + +static inline struct virtnet_xsk_ctx_tx *ptr_to_xsk (void *ptr) +{ +unsigned long p; + + p = (unsigned long )ptr; +return (struct virtnet_xsk_ctx_tx *)(p & ~VIRTIO_XSK_FLAG ); +} + +static inline void virtnet_xsk_ctx_put (struct virtnet_xsk_ctx *ctx) +{ +put_page (ctx->page); +if (ctx->page_unaligned) +put_page (ctx->page_unaligned); + + --ctx->head->ref; + +if (ctx->head->active) { + ctx->next = ctx->head->ctx; + ctx->head->ctx = ctx; + }else { +if (!ctx->head->ref) +kfree (ctx->head); + } +} + +#define virtnet_xsk_ctx_tx_put (ctx) \ + virtnet_xsk_ctx_put((struct virtnet_xsk_ctx *)ctx) + +int virtnet_xsk_wakeup (struct net_device *dev,u32 qid,u32 flag); +int virtnet_poll_xsk (struct send_queue *sq,int budget); +void virtnet_xsk_complete (struct send_queue *sq,u32 num); +int virtnet_xsk_pool_setup (struct net_device *dev,struct netdev_bpf *xdp); +#endif
Xuan Zhuo
reviewerRe: [PATCH net-next v5 12/15] virtio-net: support AF_XDP zc tx
In reply to Jason WangQuoted 667 lines · Jason Wang
Quoted 71 lines · Xuan Zhuo
AF_XDP(xdp socket, xsk)is a high-performance packet receiving and sending technology.This patch implements the binding and unbinding operations of xsk and the virtio-net queue for xsk zero copy xmit.
The xsk zero copy xmit depends on tx napi. Because the actual sending of data is done in the process of tx napi. If tx napi does not work, then the data of the xsk tx queue will not be sent. So if tx napi is not true, an error will be reported when bind xsk.
If xsk is active, it will prevent ethtool from modifying tx napi.
When reclaiming ptr, a new type of ptr is added, which is distinguished based on the last two digits of ptr:
00: skb
01: xdp frame
10: xsk xmit ptrAll sent xsk packets share the virtio-net header of
xsk_hdr. If xsk needs to support csum and other functions later, consider assigning xsk hdr separately for each sent packet.Different from other physical network cards, you can reinitialize the channel when you bind xsk. And vrtio does not support independent reset channel, you can only reset the entire device. I think it is not appropriate for us to directly reset the entire setting. So the situation becomes a bit more complicated. We have to consider how to deal with the buffer referenced in vq after xsk is unbind.
I added the ring size struct
virtnet_xsk_ctxwhen xsk been bind. Each xsk buffer added to vq corresponds to a ctx. This ctx is used to record the page where the xsk buffer is located, and add a page reference. When the buffer is recycling, reduce the reference to page. When xsk has been unbind, and all related xsk buffers have been recycled, release all ctx.Signed-off-by Xuan Zhuo <[email protected]>Reviewed-by Dust Li <[email protected]>--- drivers/net/virtio/Makefile | 1 + drivers/net/virtio/virtio_net.c | 20 +- drivers/net/virtio/virtio_net.h | 37 +++- drivers/net/virtio/xsk.c | 346 ++++++++++++++++++++++++++++++++ drivers/net/virtio/xsk.h | 99 +++++++++ 5 files changed, 497 insertions(+), 6 deletions(-)create mode 100644
drivers/net/virtio/xsk.c
create mode 100644drivers/net/virtio/xsk.hdrivers/net/virtio/Makefile +1
-0@@ -4,3 +4,4 @@ # obj-$(CONFIG_VIRTIO_NET) += virtio_net.o +obj-$(CONFIG_VIRTIO_NET) += xsk.odrivers/net/virtio/virtio_net.c +1
-0@@ -1423,6 +1423,7 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget) txq =netdev_get_tx_queue (vi->dev, index);__netif_tx_lock (txq,raw_smp_processor_id ()); + work_done +=virtnet_poll_xsk (sq, budget);free_old_xmit (sq, true);__netif_tx_unlock (txq);@@ -2133,8 +2134,16 @@ static int virtnet_set_coalesce(struct net_device *dev,if (napi_weight ^ vi->sq[0 ].napi.weight) {drivers/net/virtio/virtio_net.c static int virtnet_set_coalesce(struct net_device *dev, · line 2143
Quoted 10 lines
drivers/net/virtio/virtio_net.c +7
-1if (dev->flags &IFF_UP )return -EBUSY ; -for (i =0 ; i < vi->max_queue_pairs; i++) + +for (i =0 ; i < vi->max_queue_pairs; i++) { +/* xsk xmit depend on the tx napi. So if xsk is active, +* prevent modifications to tx napi. +*/ +if (rtnl_dereference (vi->sq[i].xsk.pool)) +continue ;So this can result tx NAPI is used by some queues buy not the others. I think such inconsistency breaks the semantic of
set_coalesce()which assumes the operation is done at the device not some specific queues.How about just fail here?
Quoted 211 lines
drivers/net/virtio/virtio_net.c +9
-2+ vi->sq[i].napi.weight = napi_weight; + } }return 0 ;@@ -2407,6 +2416,8 @@ static int virtnet_xdp(struct net_device *dev, struct netdev_bpf *xdp)switch (xdp->command) {case XDP_SETUP_PROG :return virtnet_xdp_set (dev, xdp->prog, xdp->extack); +case XDP_SETUP_XSK_POOL : +return virtnet_xsk_pool_setup (dev, xdp);default :return -EINVAL ; }@@ -2466,6 +2477,7 @@ static const struct net_device_ops virtnet_netdev = { .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, .ndo_bpf = virtnet_xdp, .ndo_xdp_xmit = virtnet_xdp_xmit, + .ndo_xsk_wakeup = virtnet_xsk_wakeup, .ndo_features_check = passthru_features_check, .ndo_get_phys_port_name = virtnet_get_phys_port_name, .ndo_set_features = virtnet_set_features,@@ -2569,10 +2581,12 @@ static void free_unused_bufs(struct virtnet_info *vi)for (i =0 ; i < vi->max_queue_pairs; i++) {struct virtqueue *vq = vi->sq[i].vq;while ((buf =virtqueue_detach_unused_buf (vq)) !=NULL ) { -if (!is_xdp_frame (buf)) +if (is_skb_ptr (buf))dev_kfree_skb (buf); -else +else if (is_xdp_frame (buf))xdp_return_frame (ptr_to_xdp (buf)); +else +virtnet_xsk_ctx_tx_put (ptr_to_xsk (buf)); } }drivers/net/virtio/virtio_net.h +34
-3@@ -135,6 +135,16 @@ struct send_queue {struct virtnet_sq_stats stats;struct napi_struct napi; + +struct { +struct xsk_buff_pool __rcu *pool; + +/* xsk wait for tx inter or softirq */ +bool need_wakeup; + +/* ctx used to record the page added to vq */ +struct virtnet_xsk_ctx_head *ctx_head; + } xsk; };/* Internal representation of a receive virtqueue */ @@ -188,6 +198,13 @@ static inline void virtqueue_napi_schedule(struct napi_struct *napi, } } +#include "xsk.h" + +static inline bool is_skb_ptr (void *ptr) +{ +return !((unsigned long )ptr & (VIRTIO_XDP_FLAG |VIRTIO_XSK_FLAG )); +} +static inline bool is_xdp_frame (void *ptr) {return (unsigned long )ptr &VIRTIO_XDP_FLAG ;@@ -206,25 +223,39 @@ static inline struct xdp_frame *ptr_to_xdp(void *ptr)static inline void __free_old_xmit (struct send_queue *sq,bool in_napi,struct virtnet_sq_stats *stats) { +unsigned int xsknum =0 ;unsigned int len;void *ptr;while ((ptr =virtqueue_get_buf (sq->vq, &len)) !=NULL ) { -if (!is_xdp_frame (ptr)) { +if (is_skb_ptr (ptr)) {struct sk_buff *skb = ptr;pr_debug ("Sent skb %p\n" , skb); stats->bytes += skb->len;napi_consume_skb (skb, in_napi); - }else { + }else if (is_xdp_frame (ptr)) {struct xdp_frame *frame =ptr_to_xdp (ptr); stats->bytes += frame->len;xdp_return_frame (frame); + }else { +struct virtnet_xsk_ctx_tx *ctx; + + ctx =ptr_to_xsk (ptr); + +/* Maybe this ptr was sent by the last xsk. */ +if (ctx->ctx.head->active) + ++xsknum; + + stats->bytes += ctx->len; +virtnet_xsk_ctx_tx_put (ctx); } stats->packets++; } -} +if (xsknum) +virtnet_xsk_complete (sq, xsknum); +}#endif drivers/net/virtio/xsk.c new file +89
-0@@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* virtio-net xsk +*/ + +#include "virtio_net.h" + +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr; + +static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get (struct virtnet_xsk_ctx_head *head) +{ +struct virtnet_xsk_ctx *ctx; + + ctx = head->ctx; + head->ctx = ctx->next; + + ++head->ref; + +return ctx; +} + +#define virtnet_xsk_ctx_tx_get (head) ((struct virtnet_xsk_ctx_tx *)virtnet_xsk_ctx_get(head)) + +static void virtnet_xsk_check_queue (struct send_queue *sq) +{ +struct virtnet_info *vi = sq->vq->vdev->priv; +struct net_device *dev = vi->dev; +int qnum = sq - vi->sq; + +/* If it is a raw buffer queue, it does not check whether the status +* of the queue is stopped when sending. So there is no need to check +* the situation of the raw buffer queue. +*/ +if (is_xdp_raw_buffer_queue (vi, qnum)) +return ; + +/* If this sq is not the exclusive queue of the current cpu, +* then it may be called by start_xmit, so check it running out +* of space. +* +* Stop the queue to avoid getting packets that we are +* then unable to transmit. Then wait the tx interrupt. +*/ +if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) +netif_stop_subqueue (dev, qnum); +} + +void virtnet_xsk_complete (struct send_queue *sq,u32 num) +{ +struct xsk_buff_pool *pool; + +rcu_read_lock (); + pool =rcu_dereference (sq->xsk.pool); +if (!pool) { +rcu_read_unlock (); +return ; + } +xsk_tx_completed (pool, num); +rcu_read_unlock (); + +if (sq->xsk.need_wakeup) { + sq->xsk.need_wakeup = false; +virtqueue_napi_schedule (&sq->napi, sq->vq); + } +} + +static int virtnet_xsk_xmit (struct send_queue *sq,struct xsk_buff_pool *pool, +struct xdp_desc *desc) +{ +struct virtnet_xsk_ctx_tx *ctx; +struct virtnet_info *vi; +u32 offset, n, len; +struct page *page; +void *data; + + vi = sq->vq->vdev->priv; + + data =xsk_buff_raw_get_data (pool, desc->addr); + offset =offset_in_page (data); + + ctx =virtnet_xsk_ctx_tx_get (sq->xsk.ctx_head); + +/* xsk unaligned mode, desc may use two pages */ +if (desc->len >PAGE_SIZE - offset) + n =3 ; +else + n =2 ; + +sg_init_table (sq->sg, n);drivers/net/virtio/xsk.c line 99
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+sg_set_buf (sq->sg, &xsk_hdr, vi->hdr_len); + +/* handle for xsk first page */ + len =min_t (int, desc->len,PAGE_SIZE - offset); + page =vmalloc_to_page (data); +sg_set_page (sq->sg +1 , page, len, offset); + +/* ctx is used to record and reference this page to prevent xsk from +* being released before this xmit is recycled +*/ I'm a little bit surprised that this is done manually per device instead of doing it in xsk core.
Quoted 21 lines
drivers/net/virtio/xsk.c new file +21
-0+ ctx->ctx.page = page; +get_page (page); + +/* xsk unaligned mode, handle for the second page */ +if (len < desc->len) { + page =vmalloc_to_page (data + len); + len =min_t (int, desc->len - len,PAGE_SIZE ); +sg_set_page (sq->sg +2 , page, len,0 ); + + ctx->ctx.page_unaligned = page; +get_page (page); + }else { + ctx->ctx.page_unaligned =NULL ; + } + +return virtqueue_add_outbuf (sq->vq, sq->sg, n, +xsk_to_ptr (ctx),GFP_ATOMIC ); +} + +static int virtnet_xsk_xmit_batch(struct send_queue *sq, + struct xsk_buff_pool *pool,drivers/net/virtio/xsk.c line 130
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+unsigned int budget, + bool in_napi, int *done, + struct virtnet_sq_stats *stats) +{ + struct xdp_desc desc; +int err, packet =0 ; +int ret = -EAGAIN ; + +while (budget-- >0 ) { +if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) {
AF_XDPdoesn't use skb, so I don't see whyMAX_SKB_FRAGSis used.Looking at
virtnet_xsk_xmit(), it looks to me 3 is more suitable here. Or didAF_XDPcore can handle queue full gracefully then we don't even need to worry about this?drivers/net/virtio/xsk.c line 131
Quoted 1 line
drivers/net/virtio/xsk.c new file +1
-0+ ret = -EBUSY ;
-ENOSPClooks better.drivers/net/virtio/xsk.c line 142
Quoted 11 lines
drivers/net/virtio/xsk.c new file +11
-0+break ; + } + +if (!xsk_tx_peek_desc (pool, &desc)) { +/* done */ + ret =0 ; +break ; + } + + err =virtnet_xsk_xmit (sq, pool, &desc); +if (unlikely (err)) {If we always reserve sufficient slots, this should be an unexpected error, do we need log this as what has been done in
start_xmit()?/* This should not happen! */
if (unlikely(err)) {
dev->stats.tx_fifo_errors++;
if (net_ratelimit())
dev_warn(&dev->dev,
"Unexpected TXQ (%d) queue failure: %d\n", qnum, err);Quoted 25 lines
drivers/net/virtio/xsk.c new file +25
-0+ ret = -EBUSY ; +break ; + } + + ++packet; + } + +if (packet) { +if (virtqueue_kick_prepare (sq->vq) &&virtqueue_notify (sq->vq)) + ++stats->kicks; + + *done += packet; + stats->xdp_tx += packet; + +xsk_tx_release (pool); + } + +return ret; +} + +static int virtnet_xsk_run (struct send_queue *sq,struct xsk_buff_pool *pool, +int budget,bool in_napi) +{ +struct virtnet_sq_stats stats = {}; +int done =0 ;drivers/net/virtio/xsk.c line 177
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+int err; + + sq->xsk.need_wakeup = false; +__free_old_xmit (sq, in_napi, &stats); + +/* return err: +* -EAGAIN: done == budget +* -EBUSY: done < budget +* 0 : done < budget +*/ It's better to move the comment to the implementation of
virtnet_xsk_xmit_batch().drivers/net/virtio/xsk.c line 185
Quoted 8 lines
drivers/net/virtio/xsk.c new file +8
-0+xmit: + err =virtnet_xsk_xmit_batch (sq, pool, budget - done, in_napi, + &done, &stats); +if (err == -EBUSY ) { +__free_old_xmit (sq, in_napi, &stats); + +/* If the space is enough, let napi run again. */ +if (sq->vq->num_free >=2 +MAX_SKB_FRAGS )The comment does not match the code.
Quoted 31 lines
drivers/net/virtio/xsk.c new file +31
-0+ goto xmit; + else + sq->xsk.need_wakeup = true; + } + +virtnet_xsk_check_queue (sq); + +u64_stats_update_begin (&sq->stats.syncp); + sq->stats.packets += stats.packets; + sq->stats.bytes += stats.bytes; + sq->stats.kicks += stats.kicks; + sq->stats.xdp_tx += stats.xdp_tx; +u64_stats_update_end (&sq->stats.syncp); + +return done; +} + +int virtnet_poll_xsk (struct send_queue *sq,int budget) +{ +struct xsk_buff_pool *pool; +int work_done =0 ; + +rcu_read_lock (); + pool =rcu_dereference (sq->xsk.pool); +if (pool) + work_done =virtnet_xsk_run (sq, pool, budget, true); +rcu_read_unlock (); +return work_done; +} + +int virtnet_xsk_wakeup (struct net_device *dev,u32 qid,u32 flag)drivers/net/virtio/xsk.c line 226
Quoted 10 lines
drivers/net/virtio/xsk.c new file +10
-0+{ +struct virtnet_info *vi =netdev_priv (dev); +struct xsk_buff_pool *pool; +struct send_queue *sq; + +if (!netif_running (dev)) +return -ENETDOWN ; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ;I wonder how we can hit this check. Note that we prevent the user from modifying queue pairs when XDP is enabled:
/* For now we don't support modifying channels while XDP is loaded
* also when XDP is loaded all RX queues have XDP programs so
we only
* need to check a single RX queue.
*/
if (vi->rq[0].xdp_prog)
return-EINVAL;drivers/net/virtio/xsk.c line 230
Quoted 4 lines
drivers/net/virtio/xsk.c new file +4
-0+ + sq = &vi->sq[qid]; + +rcu_read_lock ();Can we simply use
rcu_read_lock_bh()here?Quoted 124 lines
drivers/net/virtio/xsk.c new file +116
-0+ pool =rcu_dereference (sq->xsk.pool); +if (pool) { +local_bh_disable (); +virtqueue_napi_schedule (&sq->napi, sq->vq); +local_bh_enable (); + } +rcu_read_unlock (); +return 0 ; +} + +static struct virtnet_xsk_ctx_head *virtnet_xsk_ctx_alloc (struct xsk_buff_pool *pool, +struct virtqueue *vq) +{ +struct virtnet_xsk_ctx_head *head; +u32 size, n, ring_size, ctx_sz; +struct virtnet_xsk_ctx *ctx; +void *p; + + ctx_sz =sizeof (struct virtnet_xsk_ctx_tx ); + + ring_size =virtqueue_get_vring_size (vq); + size =sizeof (*head) + ctx_sz * ring_size; + + head =kmalloc (size,GFP_ATOMIC ); +if (!head) +return NULL ; + +memset (head,0 ,sizeof (*head)); + + head->active = true; + head->frame_size =xsk_pool_get_rx_frame_size (pool); + + p = head +1 ; +for (n =0 ; n < ring_size; ++n) { + ctx = p; + ctx->head = head; + ctx->next = head->ctx; + head->ctx = ctx; + + p += ctx_sz; + } + +return head; +} + +static int virtnet_xsk_pool_enable (struct net_device *dev, +struct xsk_buff_pool *pool, +u16 qid) +{ +struct virtnet_info *vi =netdev_priv (dev); +struct send_queue *sq; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ; + + sq = &vi->sq[qid]; + +/* xsk zerocopy depend on the tx napi. +* +* All data is actually consumed and sent out from the xsk tx queue +* under the tx napi mechanism. +*/ +if (!sq->napi.weight) +return -EPERM ; + +memset (&sq->xsk,0 ,sizeof (sq->xsk)); + + sq->xsk.ctx_head =virtnet_xsk_ctx_alloc (pool, sq->vq); +if (!sq->xsk.ctx_head) +return -ENOMEM ; + +/* Here is already protected by rtnl_lock, so rcu_assign_pointer is +* safe. +*/ +rcu_assign_pointer (sq->xsk.pool, pool); + +return 0 ; +} + +static int virtnet_xsk_pool_disable (struct net_device *dev,u16 qid) +{ +struct virtnet_info *vi =netdev_priv (dev); +struct send_queue *sq; + +if (qid >= vi->curr_queue_pairs) +return -EINVAL ; + + sq = &vi->sq[qid]; + +/* Here is already protected by rtnl_lock, so rcu_assign_pointer is +* safe. +*/ +rcu_assign_pointer (sq->xsk.pool,NULL ); + +/* Sync with the XSK wakeup and with NAPI. */ +synchronize_net (); + +if (READ_ONCE (sq->xsk.ctx_head->ref)) +WRITE_ONCE (sq->xsk.ctx_head->active, false); +else +kfree (sq->xsk.ctx_head); + + sq->xsk.ctx_head =NULL ; + +return 0 ; +} + +int virtnet_xsk_pool_setup (struct net_device *dev,struct netdev_bpf *xdp) +{ +if (xdp->xsk.pool) +return virtnet_xsk_pool_enable (dev, xdp->xsk.pool, + xdp->xsk.queue_id); +else +return virtnet_xsk_pool_disable (dev, xdp->xsk.queue_id); +} +drivers/net/virtio/xsk.h new file +2
-0@@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +drivers/net/virtio/xsk.h line 12
Quoted 10 lines
drivers/net/virtio/xsk.h new file +10
-0+#ifndef __XSK_H__ +#define __XSK_H__ + +#define VIRTIO_XSK_FLAG BIT(1) + +/* When xsk disable, under normal circumstances, the network card must reclaim +* all the memory that has been sent and the memory added to the rq queue by +* destroying the queue. +* +* But virtio's queue does not support separate setting to been disable. This is a call for us to implement per queue enable/disable. Virtio-mmio has such facility but virtio-pci only allow to disable a queue (not enable).
Quoted 10 lines
"Reset"
+ * is not very suitable.
+ *
+ * The method here is that each sent chunk or chunk added to the rq queue is
+ * described by an independent structure structvirtnet_xsk_ctx.
+ *
+ * We will useget_page(page)to refer to the page where these chunks are
+ * located. And these pages will be recorded in structvirtnet_xsk_ctx. So these
+ * chunks in vq are safe. When recycling, put the these page.
+ *Quoted 8 lines
+ * These structures point to struct
virtnet_xsk_ctx_head, and ref records how
+ * many chunks have not been reclaimed. If active == 0, it means that xsk has
+ * been disabled.
+ *
+ * In this way, even if xsk has been unbundled with rq/sq, or a new xsk and
+ * rq/sq are bound, and a newvirtnet_xsk_ctx_headis created. It will not
+ * affect the oldvirtnet_xsk_ctxto be recycled. And free all head and ctx when
+ * ref is 0.
Quoted 5 lines
This looks complicated and it will increase the footprint. Consider the performance penalty and the complexity, I would suggest to use reset instead.
Then we don't need to introduce such context.
I don't like this either. It is best if we can reset the queue, but then, according to my understanding, the backend should also be supported synchronously, so if you don't update the backend synchronously, you can't use xsk.
I don’t think resetting the entire dev is a good solution. If you want to bind xsk to 10 queues, you may have to reset the entire device 10 times. I don’t think this is a good way. But the current spec does not support reset single queue, so I chose the current solution.
Jason, what do you think we are going to do? Realize the reset function of a single queue?
Looking forward to your reply!!!
Thanks
Quoted 66 lines
Thanks
Quoted 62 lines
+ */
drivers/net/virtio/xsk.h new file +61
-0+struct virtnet_xsk_ctx ; +struct virtnet_xsk_ctx_head { +struct virtnet_xsk_ctx *ctx; + +/* how many ctx has been add to vq */ +u64 ref; + +unsigned int frame_size; + +/* the xsk status */ +bool active; +}; + +struct virtnet_xsk_ctx { +struct virtnet_xsk_ctx_head *head; +struct virtnet_xsk_ctx *next; + +struct page *page; + +/* xsk unaligned mode will use two page in one desc */ +struct page *page_unaligned; +}; + +struct virtnet_xsk_ctx_tx { +/* this *MUST* be the first */ +struct virtnet_xsk_ctx ctx; + +/* xsk tx xmit use this record the len of packet */ +u32 len; +}; + +static inline void *xsk_to_ptr (struct virtnet_xsk_ctx_tx *ctx) +{ +return (void *)((unsigned long )ctx |VIRTIO_XSK_FLAG ); +} + +static inline struct virtnet_xsk_ctx_tx *ptr_to_xsk (void *ptr) +{ +unsigned long p; + + p = (unsigned long )ptr; +return (struct virtnet_xsk_ctx_tx *)(p & ~VIRTIO_XSK_FLAG ); +} + +static inline void virtnet_xsk_ctx_put (struct virtnet_xsk_ctx *ctx) +{ +put_page (ctx->page); +if (ctx->page_unaligned) +put_page (ctx->page_unaligned); + + --ctx->head->ref; + +if (ctx->head->active) { + ctx->next = ctx->head->ctx; + ctx->head->ctx = ctx; + }else { +if (!ctx->head->ref) +kfree (ctx->head); + } +} +
Quoted 9 lines
drivers/net/virtio/xsk.h line 99
Quoted 8 lines
drivers/net/virtio/xsk.h new file +8
-0+#define virtnet_xsk_ctx_tx_put (ctx) \ + virtnet_xsk_ctx_put((struct virtnet_xsk_ctx *)ctx) + +int virtnet_xsk_wakeup (struct net_device *dev,u32 qid,u32 flag); +int virtnet_poll_xsk (struct send_queue *sq,int budget); +void virtnet_xsk_complete (struct send_queue *sq,u32 num); +int virtnet_xsk_pool_setup (struct net_device *dev,struct netdev_bpf *xdp); +#endif
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 12/15] virtio-net: support AF_XDP zc tx
Quoted 8 lines · Xuan Zhuo
Quoted 8 lines
Quoted 4 lines
+ * In this way, even if xsk has been unbundled with rq/sq, or a new xsk and
+ * rq/sq are bound, and a newvirtnet_xsk_ctx_headis created. It will not
+ * affect the oldvirtnet_xsk_ctxto be recycled. And free all head and ctx when
+ * ref is 0.This looks complicated and it will increase the footprint. Consider the performance penalty and the complexity, I would suggest to use reset instead.
Quoted 5 lines
Quoted 1 line
Then we don't need to introduce such context.
I don't like this either. It is best if we can reset the queue, but then, according to my understanding, the backend should also be supported synchronously, so if you don't update the backend synchronously, you can't use xsk.
Yes, actually, vhost-net support per vq suspending. The problem is that we're lacking a proper API at virtio level.
Virtio-pci has queue_enable but it forbids writing zero to that.
Quoted 8 lines
I don’t think resetting the entire dev is a good solution. If you want to bind xsk to 10 queues, you may have to reset the entire device 10 times. I don’t think this is a good way. But the current spec does not support reset single queue, so I chose the current solution.
Jason, what do you think we are going to do? Realize the reset function of a single queue?
Yes, it's the best way. Do you want to work on that?
We can start from the spec patch, and introduce it as basic facility and implement it in the PCI transport first.
Thanks
Quoted 5 lines
Looking forward to your reply!!!
Thanks
Xuan Zhuo
reviewerRe: [PATCH net-next v5 12/15] virtio-net: support AF_XDP zc tx
Quoted 29 lines · Jason Wang
Quoted 8 lines · Xuan Zhuo
Quoted 8 lines
Quoted 4 lines
+ * In this way, even if xsk has been unbundled with rq/sq, or a new xsk and
+ * rq/sq are bound, and a newvirtnet_xsk_ctx_headis created. It will not
+ * affect the oldvirtnet_xsk_ctxto be recycled. And free all head and ctx when
+ * ref is 0.This looks complicated and it will increase the footprint. Consider the performance penalty and the complexity, I would suggest to use reset instead.
Quoted 5 lines
Quoted 1 line
Then we don't need to introduce such context.
I don't like this either. It is best if we can reset the queue, but then, according to my understanding, the backend should also be supported synchronously, so if you don't update the backend synchronously, you can't use xsk.
Yes, actually, vhost-net support per vq suspending. The problem is that we're lacking a proper API at virtio level.
Virtio-pci has
queue_enablebut it forbids writing zero to that.Quoted 6 lines
I don’t think resetting the entire dev is a good solution. If you want to bind xsk to 10 queues, you may have to reset the entire device 10 times. I don’t think this is a good way. But the current spec does not support reset single queue, so I chose the current solution.
Quoted 5 lines
Quoted 2 lines
Jason, what do you think we are going to do? Realize the reset function of a single queue?
Yes, it's the best way. Do you want to work on that?
Of course, I am very willing to continue this work. Although users must upgrade the backend to use virtio-net + xsk in the future, this makes the situation a bit troublesome.
I will complete the kernel modification as soon as possible, but I am not familiar with the process of submitting the spec patch. Can you give me some guidance and where should I send the spec patch.
Thanks.
Quoted 13 lines
We can start from the spec patch, and introduce it as basic facility and implement it in the PCI transport first.
Thanks
Quoted 5 lines
Looking forward to your reply!!!
Thanks
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 12/15] virtio-net: support AF_XDP zc tx
Quoted 30 lines · Xuan Zhuo
Quoted 29 lines · Jason Wang
Quoted 8 lines · Xuan Zhuo
Quoted 8 lines
Quoted 4 lines
+ * In this way, even if xsk has been unbundled with rq/sq, or a new xsk and
+ * rq/sq are bound, and a newvirtnet_xsk_ctx_headis created. It will not
+ * affect the oldvirtnet_xsk_ctxto be recycled. And free all head and ctx when
+ * ref is 0.This looks complicated and it will increase the footprint. Consider the performance penalty and the complexity, I would suggest to use reset instead.
Quoted 5 lines
Quoted 1 line
Then we don't need to introduce such context.
I don't like this either. It is best if we can reset the queue, but then, according to my understanding, the backend should also be supported synchronously, so if you don't update the backend synchronously, you can't use xsk.
Yes, actually, vhost-net support per vq suspending. The problem is that we're lacking a proper API at virtio level.
Virtio-pci has
queue_enablebut it forbids writing zero to that.Quoted 7 lines
I don’t think resetting the entire dev is a good solution. If you want to bind xsk to 10 queues, you may have to reset the entire device 10 times. I don’t think this is a good way. But the current spec does not support reset single queue, so I chose the current solution.
Jason, what do you think we are going to do? Realize the reset function of a single queue?
Quoted 8 lines
Quoted 1 line
Yes, it's the best way. Do you want to work on that?
Of course, I am very willing to continue this work. Although users must upgrade the backend to use virtio-net + xsk in the future, this makes the situation a bit troublesome.
I will complete the kernel modification as soon as possible, but I am not familiar with the process of submitting the spec patch. Can you give me some guidance and where should I send the spec patch.
Subscribe the virtio dev mailing list [1] and send the spec path there.
Thanks
[1] https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=virtio#feedback
Quoted 13 lines
Thanks.
Quoted 10 lines
We can start from the spec patch, and introduce it as basic facility and implement it in the PCI transport first.
Thanks
Quoted 4 lines
Looking forward to your reply!!!
Thanks
Xuan Zhuo
reviewerPATCH v5 13/15 virtio-net: support AF_XDP zc rx
In reply to Xuan ZhuoCompared to the case of xsk tx, the case of xsk zc rx is more complicated.
When we process the buf received by vq, we may encounter ordinary buffers, or xsk buffers. What makes the situation more complicated is that in the case of mergeable, when num_buffer > 1, we may still encounter the case where xsk buffer is mixed with ordinary buffer.
Another thing that makes the situation more complicated is that when we get an xsk buffer from vq, the xsk bound to this xsk buffer may have been unbound.
--- drivers/net/virtio/virtio_net.c | 238 ++++++++++++++----- drivers/net/virtio/virtio_net.h | 27 +++ drivers/net/virtio/xsk.c | 396 +++++++++++++++++++++++++++++++- drivers/net/virtio/xsk.h | 75 ++++++ 4 files changed, 678 insertions(+), 58 deletions(-)
drivers/net/virtio/virtio_net.c +184 -54
@@ -125,11 +125,6 @@ static int rxq2vq(int rxq)return rxq *2 ; } -static inline struct virtio_net_hdr_mrg_rxbuf *skb_vnet_hdr (struct sk_buff *skb) -{ -return (struct virtio_net_hdr_mrg_rxbuf *)skb->cb; -} -/* * private is used to chain pages for big packets, put the whole * most recent used list in the beginning for reuse
@@ -458,6 +453,68 @@ static unsigned int virtnet_get_headroom(struct virtnet_info *vi)return vi->xdp_enabled ?VIRTIO_XDP_HEADROOM :0 ; } +/* return value: +* 1: XDP_PASS should handle to build skb +* -1: xdp err, should handle to free the buf and return NULL +* 0: buf has been consumed by xdp +*/ +int virtnet_run_xdp (struct net_device *dev, +struct bpf_prog *xdp_prog, +struct xdp_buff *xdp, +unsigned int *xdp_xmit, +struct virtnet_rq_stats *stats) +{ +struct xdp_frame *xdpf; +int act, err; + + act =bpf_prog_run_xdp (xdp_prog, xdp); + stats->xdp_packets++; + +switch (act) { +case XDP_PASS : +return 1 ; + +case XDP_TX : + stats->xdp_tx++; + xdpf =xdp_convert_buff_to_frame (xdp); +if (unlikely (!xdpf)) + goto err_xdp; + err =virtnet_xdp_xmit (dev,1 , &xdpf,0 ); +if (unlikely (!err)) { +xdp_return_frame_rx_napi (xdpf); + }else if (unlikely (err <0 )) { +trace_xdp_exception (dev, xdp_prog, act); + goto err_xdp; + } + *xdp_xmit |=VIRTIO_XDP_TX ; +return 0 ; + +case XDP_REDIRECT : + stats->xdp_redirects++; + err =xdp_do_redirect (dev, xdp, xdp_prog); +if (err) + goto err_xdp; + + *xdp_xmit |=VIRTIO_XDP_REDIR ; +return 0 ; + +default : +bpf_warn_invalid_xdp_action (act); + fallthrough; + +case XDP_ABORTED : +trace_xdp_exception (dev, xdp_prog, act); + fallthrough; + +case XDP_DROP : +break ; + } + +err_xdp: + stats->xdp_drops++; +return -1 ; +} +/* We copy the packet for XDP in the following cases: * * 1) Packet is scattered across multiple rx buffers.
@@ -491,27 +548,40 @@ static struct page *xdp_linearize_page(struct receive_queue *rq,int tailroom =SKB_DATA_ALIGN (sizeof (struct skb_shared_info ));unsigned int buflen;void *buf; +void *ctx;int off; - buf =virtqueue_get_buf (rq->vq, &buflen); + buf =virtqueue_get_buf_ctx (rq->vq, &buflen, &ctx);if (unlikely (!buf)) goto err_buf; - p =virt_to_head_page (buf); - off = buf -page_address (p); -/* guard against a misconfigured or uncooperative backend that * is sending packet larger than the MTU. */ if ((page_off + buflen + tailroom) >PAGE_SIZE ) { -put_page (p); +virtnet_rx_put_buf (buf, ctx); goto err_buf; } -memcpy (page_address (page) + page_off, -page_address (p) + off, buflen); +if (is_xsk_ctx (ctx)) { +struct virtnet_xsk_ctx_rx *xsk_ctx; + + xsk_ctx = (struct virtnet_xsk_ctx_rx *)buf; + +virtnet_xsk_ctx_rx_copy (xsk_ctx, +page_address (page) + page_off, + buflen, true); + +virtnet_xsk_ctx_rx_put (xsk_ctx); + }else { + p =virt_to_head_page (buf); + off = buf -page_address (p); + +memcpy (page_address (page) + page_off, +page_address (p) + off, buflen); +put_page (p); + } page_off += buflen; -put_page (p); }/* Headroom does not contribute to packet length */
@@ -522,17 +592,16 @@ static struct page *xdp_linearize_page(struct receive_queue *rq,return NULL ; } -static void merge_drop_follow_bufs (struct net_device *dev, -struct receive_queue *rq, -u16 num_buf, -struct virtnet_rq_stats *stats) +void merge_drop_follow_bufs (struct net_device *dev, +struct receive_queue *rq, +u16 num_buf, +struct virtnet_rq_stats *stats) { -struct page *page;unsigned int len; -void *buf; +void *buf, *ctx;while (num_buf-- >1 ) { - buf =virtqueue_get_buf (rq->vq, &len); + buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx);if (unlikely (!buf)) {pr_debug ("%s: rx error: %d buffers missing\n" , dev->name, num_buf);
@@ -540,23 +609,80 @@ static void merge_drop_follow_bufs(struct net_device *dev,break ; } stats->bytes += len; - page =virt_to_head_page (buf); -put_page (page); +virtnet_rx_put_buf (buf, ctx); + } +} + +static char *merge_get_follow_buf (struct net_device *dev, +struct receive_queue *rq, +int *plen,int *ptruesize, +int index,int total) +{ +struct virtnet_xsk_ctx_rx *xsk_ctx; +unsigned int truesize; +char *buf; +void *ctx; +int len; + + buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx); +if (unlikely (!buf)) { +pr_debug ("%s: rx error: %d buffers out of %d missing\n" , + dev->name, index, total); + dev->stats.rx_length_errors++; +return NULL ; + } + +if (is_xsk_ctx (ctx)) { + xsk_ctx = (struct virtnet_xsk_ctx_rx *)buf; + +if (unlikely (len > xsk_ctx->ctx.head->truesize)) { +pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , + dev->name, len, (unsigned long )ctx); + dev->stats.rx_length_errors++; +virtnet_xsk_ctx_rx_put (xsk_ctx); +return ERR_PTR (-EDQUOT ); + } + + truesize = len; + + buf =virtnet_alloc_frag (rq, truesize,GFP_ATOMIC ); +if (unlikely (!buf)) { +virtnet_xsk_ctx_rx_put (xsk_ctx); +return ERR_PTR (-ENOMEM ); + } + +virtnet_xsk_ctx_rx_copy (xsk_ctx, buf, len, true); +virtnet_xsk_ctx_rx_put (xsk_ctx); + }else { + truesize =mergeable_ctx_to_truesize (ctx); +if (unlikely (len > truesize)) { +pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , + dev->name, len, (unsigned long )ctx); + dev->stats.rx_length_errors++; + +put_page (virt_to_head_page (buf)); +return ERR_PTR (-EDQUOT ); + } } + + *plen = len; + *ptruesize = truesize; + +return buf; } -static struct sk_buff *merge_receive_follow_bufs (struct net_device *dev, -struct virtnet_info *vi, -struct receive_queue *rq, -struct sk_buff *head_skb, -u16 num_buf, -struct virtnet_rq_stats *stats) +struct sk_buff *merge_receive_follow_bufs (struct net_device *dev, +struct virtnet_info *vi, +struct receive_queue *rq, +struct sk_buff *head_skb, +u16 num_buf, +struct virtnet_rq_stats *stats) {struct sk_buff *curr_skb;unsigned int truesize;unsigned int len, num;struct page *page; -void *buf, *ctx; +void *buf;int offset; curr_skb = head_skb;
@@ -565,25 +691,17 @@ static struct sk_buff *merge_receive_follow_bufs(struct net_device *dev,while (--num_buf) {int num_skb_frags; - buf =virtqueue_get_buf_ctx (rq->vq, &len, &ctx); -if (unlikely (!buf)) { -pr_debug ("%s: rx error: %d buffers out of %d missing\n" , - dev->name, num_buf, num); - dev->stats.rx_length_errors++; + buf =merge_get_follow_buf (dev, rq, &len, &truesize, + num_buf, num); +if (unlikely (!buf)) goto err_buf; - } + +if (IS_ERR (buf)) + goto err_drop; stats->bytes += len; page =virt_to_head_page (buf); - truesize =mergeable_ctx_to_truesize (ctx); -if (unlikely (len > truesize)) { -pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , - dev->name, len, (unsigned long )ctx); - dev->stats.rx_length_errors++; - goto err_skb; - } - num_skb_frags =skb_shinfo (curr_skb)->nr_frags;if (unlikely (num_skb_frags ==MAX_SKB_FRAGS )) {struct sk_buff *nskb =alloc_skb (0 ,GFP_ATOMIC );
@@ -618,6 +736,7 @@ static struct sk_buff *merge_receive_follow_bufs(struct net_device *dev, err_skb:put_page (page); +err_drop:merge_drop_follow_bufs (dev, rq, num_buf, stats); err_buf: stats->drops++;
@@ -982,16 +1101,18 @@ static void receive_buf(struct virtnet_info *vi, struct receive_queue *rq,pr_debug ("%s: short packet %i\n" , dev->name, len); dev->stats.rx_length_errors++;if (vi->mergeable_rx_bufs) { -put_page (virt_to_head_page (buf)); +virtnet_rx_put_buf (buf, ctx); }else if (vi->big_packets) {give_pages (rq, buf); }else { -put_page (virt_to_head_page (buf)); +virtnet_rx_put_buf (buf, ctx); }return ; } -if (vi->mergeable_rx_bufs) +if (is_xsk_ctx (ctx)) + skb =receive_xsk (dev, vi, rq, buf, len, xdp_xmit, stats); +else if (vi->mergeable_rx_bufs) skb =receive_mergeable (dev, vi, rq, buf, ctx, len, xdp_xmit, stats);else if (vi->big_packets)
@@ -1175,6 +1296,14 @@ static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,int err;bool oom; +/* Because virtio-net does not yet support flow direct, all rx +* channels must also process other non-xsk packets. If there is +* no buf available from xsk temporarily, we try to allocate +* memory to the channel. +*/ +if (fill_recv_xsk (vi, rq, gfp)) + goto kick; + do { if (vi->mergeable_rx_bufs) err = add_recvbuf_mergeable(vi, rq, gfp);
@@ -1187,6 +1316,8 @@ static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,if (err)break ; }while (rq->vq->num_free); + +kick:if (virtqueue_kick_prepare (rq->vq) &&virtqueue_notify (rq->vq)) {unsigned long flags;
@@ -2575,7 +2706,7 @@ static void free_receive_page_frags(struct virtnet_info *vi)static void free_unused_bufs (struct virtnet_info *vi) { -void *buf; +void *buf, *ctx;int i;for (i =0 ; i < vi->max_queue_pairs; i++) {
@@ -2593,14 +2724,13 @@ static void free_unused_bufs(struct virtnet_info *vi)for (i =0 ; i < vi->max_queue_pairs; i++) {struct virtqueue *vq = vi->rq[i].vq; -while ((buf =virtqueue_detach_unused_buf (vq)) !=NULL ) { -if (vi->mergeable_rx_bufs) { -put_page (virt_to_head_page (buf)); - }else if (vi->big_packets) { +while ((buf =virtqueue_detach_unused_buf_ctx (vq, &ctx)) !=NULL ) { +if (vi->mergeable_rx_bufs) +virtnet_rx_put_buf (buf, ctx); +else if (vi->big_packets)give_pages (&vi->rq[i], buf); - }else { -put_page (virt_to_head_page (buf)); - } +else +virtnet_rx_put_buf (buf, ctx); } } }
drivers/net/virtio/virtio_net.h +27 -0
@@ -177,8 +177,23 @@ struct receive_queue {char name[40 ];struct xdp_rxq_info xdp_rxq; + +struct { +struct xsk_buff_pool __rcu *pool; + +/* xdp rxq used by xsk */ +struct xdp_rxq_info xdp_rxq; + +/* ctx used to record the page added to vq */ +struct virtnet_xsk_ctx_head *ctx_head; + } xsk; }; +static inline struct virtio_net_hdr_mrg_rxbuf *skb_vnet_hdr (struct sk_buff *skb) +{ +return (struct virtio_net_hdr_mrg_rxbuf *)skb->cb; +} +static inline bool is_xdp_raw_buffer_queue (struct virtnet_info *vi,int q) {if (q < (vi->curr_queue_pairs - vi->xdp_queue_pairs))
@@ -258,4 +273,16 @@ static inline void __free_old_xmit(struct send_queue *sq, bool in_napi,if (xsknum) virtnet_xsk_complete(sq, xsknum); } + +int virtnet_run_xdp (struct net_device *dev,struct bpf_prog *xdp_prog, +struct xdp_buff *xdp,unsigned int *xdp_xmit, +struct virtnet_rq_stats *stats); +struct sk_buff *merge_receive_follow_bufs (struct net_device *dev, +struct virtnet_info *vi, +struct receive_queue *rq, +struct sk_buff *head_skb, +u16 num_buf, +struct virtnet_rq_stats *stats); +void merge_drop_follow_bufs (struct net_device *dev,struct receive_queue *rq, +u16 num_buf,struct virtnet_rq_stats *stats);#endif
drivers/net/virtio/xsk.c +392 -4
474 lines not on this page · raw message
drivers/net/virtio/xsk.h +75 -0
101 lines not on this page · raw message
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
kernel test robot
build botRe: [PATCH net-next v5 13/15] virtio-net: support AF_XDP zc rx
Thank you for the patch! Perhaps something to improve:
Hi Xuan,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on net-next/master]
url: https://github.com/0day-ci/linux/commits/Xuan-Zhuo/virtio-net-support-xdp-socket-zero-copy/20210617-033438 base: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git c7654495916e109f76a67fd3ae68f8fa70ab4faa config: x86_64-randconfig-a015-20210617 (attached as .config) compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 64720f57bea6a6bf033feef4a5751ab9c0c3b401)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/f5f1e60139e7c38fbb4ed58d503e89bbb26c1464
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Xuan-Zhuo/virtio-net-support-xdp-socket-zero-copy/20210617-033438 git checkout f5f1e60139e7c38fbb4ed58d503e89bbb26c1464
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
>> drivers/net/virtio/virtio_net.c:1304:2: warning: variable 'oom' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (fill_recv_xsk(vi, rq, gfp))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:56:28: note: expanded from macro 'if'
#define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:58:30: note: expanded from macro '__trace_if_var'
#define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/virtio/virtio_net.c:1329:10: note: uninitialized use occurs here
return !oom;
^~~
drivers/net/virtio/virtio_net.c:1304:2: note: remove the 'if' if its condition is always false
if (fill_recv_xsk(vi, rq, gfp))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:56:23: note: expanded from macro 'if'
#define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
^
drivers/net/virtio/virtio_net.c:1297:10: note: initialize the variable 'oom' to silence this warning
bool oom;
^
= 01 warning generated.
vim +1304 drivers/net/virtio/virtio_net.c
1285
1286 /*
1287 * Returns false if we couldn't fill entirely (OOM).
1288 *
1289 * Normally run in the receive path, but can also be run from ndo_open
1290 * before we're receiving packets, or from refill_work which is
1291 * careful to disable receiving (using napi_disable).
1292 */
1293 static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,
1294 gfp_t gfp)
1295 {
1296 int err;
1297 bool oom;
1298
1299 /* Because virtio-net does not yet support flow direct, all rx
1300 * channels must also process other non-xsk packets. If there is
1301 * no buf available from xsk temporarily, we try to allocate
1302 * memory to the channel.
1303 */
> 1304 if (fill_recv_xsk(vi, rq, gfp))
1305 goto kick;
1306
1307 do {
1308 if (vi->mergeable_rx_bufs)
1309 err = add_recvbuf_mergeable(vi, rq, gfp);
1310 else if (vi->big_packets)
1311 err = add_recvbuf_big(vi, rq, gfp);
1312 else
1313 err = add_recvbuf_small(vi, rq, gfp);
1314
1315 oom = err == -ENOMEM;
1316 if (err)
1317 break;
1318 } while (rq->vq->num_free);
1319
1320 kick:
1321 if (virtqueue_kick_prepare(rq->vq) && virtqueue_notify(rq->vq)) {
1322 unsigned long flags;
1323
1324 flags = u64_stats_update_begin_irqsave(&rq->stats.syncp);
1325 rq->stats.kicks++;
1326 u64_stats_update_end_irqrestore(&rq->stats.syncp, flags);
1327 }
1328
1329 return !oom;
1330 }
1331
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Re: [PATCH net-next v5 13/15] virtio-net: support AF_XDP zc rx
In reply to Xuan ZhuoQuoted 8 lines · Xuan Zhuo
Compared to the case of xsk tx, the case of xsk zc rx is more complicated.
When we process the buf received by vq, we may encounter ordinary buffers, or xsk buffers. What makes the situation more complicated is that in the case of mergeable, when
num_buffer> 1, we may still encounter the case where xsk buffer is mixed with ordinary buffer.
Quoted 5 lines
Another thing that makes the situation more complicated is that when we get an xsk buffer from vq, the xsk bound to this xsk buffer may have been unbound.
Signed-off-by Xuan Zhuo <[email protected]>
This is somehow similar to the case of tx where we don't have per vq reset.
[...]
drivers/net/virtio/virtio_net.c static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq, · line 1299
Quoted 13 lines
drivers/net/virtio/virtio_net.c +4
-1-if (vi->mergeable_rx_bufs) +if (is_xsk_ctx (ctx)) + skb =receive_xsk (dev, vi, rq, buf, len, xdp_xmit, stats); +else if (vi->mergeable_rx_bufs) skb =receive_mergeable (dev, vi, rq, buf, ctx, len, xdp_xmit, stats);else if (vi->big_packets)@@ -1175,6 +1296,14 @@ static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,int err;bool oom; +/* Because virtio-net does not yet support flow direct,
Note that this is not the case any more. RSS has been supported by virtio spec and qemu/vhost/tap now. We just need some work on the virtio-net driver part (e.g the ethool interface).
Thanks
Xuan Zhuo
reviewerRe: [PATCH net-next v5 13/15] virtio-net: support AF_XDP zc rx
Quoted 33 lines · Jason Wang
Quoted 8 lines · Xuan Zhuo
Compared to the case of xsk tx, the case of xsk zc rx is more complicated.
When we process the buf received by vq, we may encounter ordinary buffers, or xsk buffers. What makes the situation more complicated is that in the case of mergeable, when
num_buffer> 1, we may still encounter the case where xsk buffer is mixed with ordinary buffer.Quoted 5 lines
Another thing that makes the situation more complicated is that when we get an xsk buffer from vq, the xsk bound to this xsk buffer may have been unbound.
Signed-off-by Xuan Zhuo <[email protected]>This is somehow similar to the case of tx where we don't have per vq reset.
[...]
Quoted 12 lines
drivers/net/virtio/virtio_net.c +3
-1-if (vi->mergeable_rx_bufs) +if (is_xsk_ctx (ctx)) + skb =receive_xsk (dev, vi, rq, buf, len, xdp_xmit, stats); +else if (vi->mergeable_rx_bufs) skb =receive_mergeable (dev, vi, rq, buf, ctx, len, xdp_xmit, stats);else if (vi->big_packets)@@ -1175,6 +1296,14 @@ static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,int err;bool oom;
Quoted 6 lines
Review static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq, · line 1299
Quoted 1 line
(quoted diff) +1
-0+ /* Because virtio-net does not yet support flow direct,Note that this is not the case any more. RSS has been supported by virtio spec and qemu/vhost/tap now. We just need some work on the virtio-net driver part (e.g the ethool interface).
Oh, are there any plans? Who is doing this work, can I help?
Thanks.
Quoted 4 lines
Thanks
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 13/15] virtio-net: support AF_XDP zc rx
Quoted 31 lines · Xuan Zhuo
Quoted 30 lines · Jason Wang
Quoted 8 lines · Xuan Zhuo
Compared to the case of xsk tx, the case of xsk zc rx is more complicated.
When we process the buf received by vq, we may encounter ordinary buffers, or xsk buffers. What makes the situation more complicated is that in the case of mergeable, when
num_buffer> 1, we may still encounter the case where xsk buffer is mixed with ordinary buffer.Quoted 5 lines
Another thing that makes the situation more complicated is that when we get an xsk buffer from vq, the xsk bound to this xsk buffer may have been unbound.
Signed-off-by Xuan Zhuo <[email protected]>This is somehow similar to the case of tx where we don't have per vq reset.
[...]
Quoted 11 lines
drivers/net/virtio/virtio_net.c +3
-1-if (vi->mergeable_rx_bufs) +if (is_xsk_ctx (ctx)) + skb =receive_xsk (dev, vi, rq, buf, len, xdp_xmit, stats); +else if (vi->mergeable_rx_bufs) skb =receive_mergeable (dev, vi, rq, buf, ctx, len, xdp_xmit, stats);else if (vi->big_packets)@@ -1175,6 +1296,14 @@ static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,int err;bool oom;
Quoted 6 lines
Quoted 5 lines
Review static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq, · line 1299
Quoted 1 line
(quoted diff) +1
-0+ /* Because virtio-net does not yet support flow direct,Note that this is not the case any more. RSS has been supported by virtio spec and qemu/vhost/tap now. We just need some work on the virtio-net driver part (e.g the ethool interface).
Oh, are there any plans? Who is doing this work, can I help?
Qemu and spec has support RSS.
TAP support is ready via steering eBPF program, you can try to play it with current qemu master.
The only thing missed is the Linux driver, I think Yuri or Andrew is working on this.
Thanks
Quoted 6 lines
Thanks.
Quoted 3 lines
Thanks
Xuan Zhuo
reviewerRe: [PATCH net-next v5 13/15] virtio-net: support AF_XDP zc rx
Quoted 41 lines · Jason Wang
Quoted 31 lines · Xuan Zhuo
Quoted 30 lines · Jason Wang
Quoted 8 lines · Xuan Zhuo
Compared to the case of xsk tx, the case of xsk zc rx is more complicated.
When we process the buf received by vq, we may encounter ordinary buffers, or xsk buffers. What makes the situation more complicated is that in the case of mergeable, when
num_buffer> 1, we may still encounter the case where xsk buffer is mixed with ordinary buffer.Quoted 5 lines
Another thing that makes the situation more complicated is that when we get an xsk buffer from vq, the xsk bound to this xsk buffer may have been unbound.
Signed-off-by Xuan Zhuo <[email protected]>This is somehow similar to the case of tx where we don't have per vq reset.
[...]
Quoted 11 lines
drivers/net/virtio/virtio_net.c +3
-1-if (vi->mergeable_rx_bufs) +if (is_xsk_ctx (ctx)) + skb =receive_xsk (dev, vi, rq, buf, len, xdp_xmit, stats); +else if (vi->mergeable_rx_bufs) skb =receive_mergeable (dev, vi, rq, buf, ctx, len, xdp_xmit, stats);else if (vi->big_packets)@@ -1175,6 +1296,14 @@ static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,int err;bool oom;Quoted 6 lines
Quoted 5 lines
Review static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq, · line 1299
Quoted 1 line
(quoted diff) +1
-0+ /* Because virtio-net does not yet support flow direct,Note that this is not the case any more. RSS has been supported by virtio spec and qemu/vhost/tap now. We just need some work on the virtio-net driver part (e.g the ethool interface).
Oh, are there any plans? Who is doing this work, can I help?
Quoted 7 lines
Qemu and spec has support RSS.
TAP support is ready via steering eBPF program, you can try to play it with current qemu master.
The only thing missed is the Linux driver, I think Yuri or Andrew is working on this.
I feel that in the case of xsk, the flow director is more appropriate.
Users may still want to allocate packets to a certain channel based on information such as port/ip/tcp/udp, and then xsk will process them.
I will try to push the flow director to the spec.
Thanks.
Quoted 11 lines
Thanks
Quoted 6 lines
Thanks.
Quoted 3 lines
Thanks
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 13/15] virtio-net: support AF_XDP zc rx
Quoted 43 lines · Xuan Zhuo
Quoted 42 lines · Jason Wang
Quoted 30 lines · Xuan Zhuo
Quoted 29 lines · Jason Wang
Quoted 8 lines · Xuan Zhuo
Compared to the case of xsk tx, the case of xsk zc rx is more complicated.
When we process the buf received by vq, we may encounter ordinary buffers, or xsk buffers. What makes the situation more complicated is that in the case of mergeable, when
num_buffer> 1, we may still encounter the case where xsk buffer is mixed with ordinary buffer.Quoted 5 lines
Another thing that makes the situation more complicated is that when we get an xsk buffer from vq, the xsk bound to this xsk buffer may have been unbound.
Signed-off-by Xuan Zhuo <[email protected]>This is somehow similar to the case of tx where we don't have per vq reset.
[...]
Quoted 11 lines
drivers/net/virtio/virtio_net.c +3
-1-if (vi->mergeable_rx_bufs) +if (is_xsk_ctx (ctx)) + skb =receive_xsk (dev, vi, rq, buf, len, xdp_xmit, stats); +else if (vi->mergeable_rx_bufs) skb =receive_mergeable (dev, vi, rq, buf, ctx, len, xdp_xmit, stats);else if (vi->big_packets)@@ -1175,6 +1296,14 @@ static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,int err;bool oom;Quoted 5 lines
Quoted 4 lines
Review static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq, · line 1299
Quoted 1 line
(quoted diff) +1
-0+ /* Because virtio-net does not yet support flow direct,Note that this is not the case any more. RSS has been supported by virtio spec and qemu/vhost/tap now. We just need some work on the virtio-net driver part (e.g the ethool interface).
Oh, are there any plans? Who is doing this work, can I help?
Qemu and spec has support RSS.
TAP support is ready via steering eBPF program, you can try to play it with current qemu master.
Quoted 8 lines
Quoted 2 lines
The only thing missed is the Linux driver, I think Yuri or Andrew is working on this.
I feel that in the case of xsk, the flow director is more appropriate.
Users may still want to allocate packets to a certain channel based on information such as port/ip/tcp/udp, and then xsk will process them.
I will try to push the flow director to the spec.
That would be fine. For the backend implementation, it could still be implemented via steering eBPF.
Thanks
Quoted 11 lines
Thanks.
Quoted 8 lines
Thanks
Quoted 5 lines
Thanks.
Quoted 3 lines
Thanks
kernel test robot
build botRe: [PATCH net-next v5 13/15] virtio-net: support AF_XDP zc rx
In reply to Xuan ZhuoThank you for the patch! Yet something to improve:
Hi Xuan,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on net-next/master]
url: https://github.com/0day-ci/linux/commits/Xuan-Zhuo/virtio-net-support-xdp-socket-zero-copy/20210617-033438 base: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git c7654495916e109f76a67fd3ae68f8fa70ab4faa config: i386-randconfig-a004-20210620 (attached as .config) compiler: gcc-9 (Debian 9.3.0-22) 9.3.0 reproduce (this is a W=1 build): # https://github.com/0day-ci/linux/commit/f5f1e60139e7c38fbb4ed58d503e89bbb26c1464 git remote add linux-review https://github.com/0day-ci/linux git fetch --no-tags linux-review Xuan-Zhuo/virtio-net-support-xdp-socket-zero-copy/20210617-033438 git checkout f5f1e60139e7c38fbb4ed58d503e89bbb26c1464 # save the attached .config to linux build tree make W=1 ARCH=i386
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>, old ones prefixed by <<):
ERROR: modpost: missing MODULE_LICENSE() in drivers/net/virtio/xsk.o
ERROR: modpost: "merge_drop_follow_bufs" [drivers/net/virtio/xsk.ko] undefined!
ERROR: modpost: "virtnet_run_xdp" [drivers/net/virtio/xsk.ko] undefined!
ERROR: modpost: "merge_receive_follow_bufs" [drivers/net/virtio/xsk.ko] undefined!
ERROR: modpost: "virtnet_xsk_wakeup" [drivers/net/virtio/virtio_net.ko] undefined!
ERROR: modpost: "receive_xsk" [drivers/net/virtio/virtio_net.ko] undefined!
ERROR: modpost: "add_recvbuf_xsk" [drivers/net/virtio/virtio_net.ko] undefined!
ERROR: modpost: "virtnet_poll_xsk" [drivers/net/virtio/virtio_net.ko] undefined!
>> ERROR: modpost: "virtqueue_detach_unused_buf_ctx" [drivers/net/virtio/virtio_net.ko] undefined!
ERROR: modpost: "virtnet_xsk_ctx_rx_copy" [drivers/net/virtio/virtio_net.ko] undefined!
ERROR: modpost: "virtnet_xsk_complete" [drivers/net/virtio/virtio_net.ko] undefined!
WARNING: modpost: suppressed 1 unresolved symbol warnings because there were too many)
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Xuan Zhuo
reviewerPATCH v5 14/15 virtio-net: xsk direct xmit inside xsk wakeup
In reply to Xuan ZhuoCalling virtqueue_napi_schedule() in wakeup results in napi running on the current cpu. If the application is not busy, then there is no problem. But if the application itself is busy, it will cause a lot of scheduling.
If the application is continuously sending data packets, due to the continuous scheduling between the application and napi, the data packet transmission will not be smooth, and there will be an obvious delay in the transmission (you can use tcpdump to see it). When pressing a channel to 100% (vhost reaches 100%), the cpu where the application is located reaches 100%.
This patch sends a small amount of data directly in wakeup. The purpose of this is to trigger the tx interrupt. The tx interrupt will be awakened on the cpu of its affinity, and then trigger the operation of the napi mechanism, napi can continue to consume the xsk tx queue. Two cpus are running, cpu0 is running applications, cpu1 executes napi consumption data. The same is to press a channel to 100%, but the utilization rate of cpu0 is 12.7% and the utilization rate of cpu1 is 2.9%.
--- drivers/net/virtio/xsk.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-)
drivers/net/virtio/xsk.c +23 -5
@@ -547,6 +547,7 @@ int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag) {struct virtnet_info *vi =netdev_priv (dev);struct xsk_buff_pool *pool; +struct netdev_queue *txq;struct send_queue *sq;if (!netif_running (dev))
@@ -559,11 +560,28 @@ int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag)rcu_read_lock (); pool =rcu_dereference (sq->xsk.pool); -if (pool) { -local_bh_disable (); -virtqueue_napi_schedule (&sq->napi, sq->vq); -local_bh_enable (); - } +if (!pool) + goto end; + +if (napi_if_scheduled_mark_missed (&sq->napi)) + goto end; + + txq =netdev_get_tx_queue (dev, qid); + +__netif_tx_lock_bh (txq); + +/* Send part of the packet directly to reduce the delay in sending the +* packet, and this can actively trigger the tx interrupts. +* +* If no packet is sent out, the ring of the device is full. In this +* case, we will still get a tx interrupt response. Then we will deal +* with the subsequent packet sending work. +*/ +virtnet_xsk_run (sq, pool, sq->napi.weight, false); + +__netif_tx_unlock_bh (txq); + +end:rcu_read_unlock ();return 0 ; }
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 14/15] virtio-net: xsk direct xmit inside xsk wakeup
Quoted 55 lines · Xuan Zhuo
Calling
virtqueue_napi_schedule()in wakeup results in napi running on the current cpu. If the application is not busy, then there is no problem. But if the application itself is busy, it will cause a lot of scheduling.If the application is continuously sending data packets, due to the continuous scheduling between the application and napi, the data packet transmission will not be smooth, and there will be an obvious delay in the transmission (you can use tcpdump to see it). When pressing a channel to 100% (vhost reaches 100%), the cpu where the application is located reaches 100%.
This patch sends a small amount of data directly in wakeup. The purpose of this is to trigger the tx interrupt. The tx interrupt will be awakened on the cpu of its affinity, and then trigger the operation of the napi mechanism, napi can continue to consume the xsk tx queue. Two cpus are running, cpu0 is running applications, cpu1 executes napi consumption data. The same is to press a channel to 100%, but the utilization rate of cpu0 is 12.7% and the utilization rate of cpu1 is 2.9%.
Signed-off-by Xuan Zhuo <[email protected]>--- drivers/net/virtio/xsk.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-)drivers/net/virtio/xsk.c +9
-5@@ -547,6 +547,7 @@ int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag) {struct virtnet_info *vi =netdev_priv (dev);struct xsk_buff_pool *pool; +struct netdev_queue *txq;struct send_queue *sq;if (!netif_running (dev))@@ -559,11 +560,28 @@ int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag)rcu_read_lock (); pool =rcu_dereference (sq->xsk.pool); -if (pool) { -local_bh_disable (); -virtqueue_napi_schedule (&sq->napi, sq->vq); -local_bh_enable (); - } +if (!pool) + goto end; + +if (napi_if_scheduled_mark_missed (&sq->napi)) + goto end; + + txq =netdev_get_tx_queue (dev, qid); +
drivers/net/virtio/xsk.c int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag) · line 580
Quoted 10 lines
drivers/net/virtio/xsk.c +10
-0+__netif_tx_lock_bh (txq); + +/* Send part of the packet directly to reduce the delay in sending the +* packet, and this can actively trigger the tx interrupts. +* +* If no packet is sent out, the ring of the device is full. In this +* case, we will still get a tx interrupt response. Then we will deal +* with the subsequent packet sending work. +*/ +virtnet_xsk_run (sq, pool, sq->napi.weight, false);
This looks tricky, and it won't be efficient since there could be some contention on the tx lock.
I wonder if we can simulate the interrupt via IPI like what RPS did.
In the long run, we may want to extend the spec to support interrupt trigger though driver.
Thanks
Quoted 7 lines
drivers/net/virtio/xsk.c +4
-0+ +__netif_tx_unlock_bh (txq); + +end:rcu_read_unlock ();return 0 ; }
Xuan Zhuo
reviewerRe: [PATCH net-next v5 14/15] virtio-net: xsk direct xmit inside xsk wakeup
Quoted 72 lines · Jason Wang
Quoted 55 lines · Xuan Zhuo
Calling
virtqueue_napi_schedule()in wakeup results in napi running on the current cpu. If the application is not busy, then there is no problem. But if the application itself is busy, it will cause a lot of scheduling.If the application is continuously sending data packets, due to the continuous scheduling between the application and napi, the data packet transmission will not be smooth, and there will be an obvious delay in the transmission (you can use tcpdump to see it). When pressing a channel to 100% (vhost reaches 100%), the cpu where the application is located reaches 100%.
This patch sends a small amount of data directly in wakeup. The purpose of this is to trigger the tx interrupt. The tx interrupt will be awakened on the cpu of its affinity, and then trigger the operation of the napi mechanism, napi can continue to consume the xsk tx queue. Two cpus are running, cpu0 is running applications, cpu1 executes napi consumption data. The same is to press a channel to 100%, but the utilization rate of cpu0 is 12.7% and the utilization rate of cpu1 is 2.9%.
Signed-off-by Xuan Zhuo <[email protected]>--- drivers/net/virtio/xsk.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-)drivers/net/virtio/xsk.c +9
-5@@ -547,6 +547,7 @@ int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag) {struct virtnet_info *vi =netdev_priv (dev);struct xsk_buff_pool *pool; +struct netdev_queue *txq;struct send_queue *sq;if (!netif_running (dev))@@ -559,11 +560,28 @@ int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag)rcu_read_lock (); pool =rcu_dereference (sq->xsk.pool); -if (pool) { -local_bh_disable (); -virtqueue_napi_schedule (&sq->napi, sq->vq); -local_bh_enable (); - } +if (!pool) + goto end; + +if (napi_if_scheduled_mark_missed (&sq->napi)) + goto end; + + txq =netdev_get_tx_queue (dev, qid); +drivers/net/virtio/xsk.c int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag) · line 580
Quoted 10 lines
drivers/net/virtio/xsk.c +10
-0+__netif_tx_lock_bh (txq); + +/* Send part of the packet directly to reduce the delay in sending the +* packet, and this can actively trigger the tx interrupts. +* +* If no packet is sent out, the ring of the device is full. In this +* case, we will still get a tx interrupt response. Then we will deal +* with the subsequent packet sending work. +*/ +virtnet_xsk_run (sq, pool, sq->napi.weight, false);This looks tricky, and it won't be efficient since there could be some contention on the tx lock.
Quoted 1 line
I wonder if we can simulate the interrupt via IPI like what RPS did.
Let me try.
Quoted 3 lines
In the long run, we may want to extend the spec to support interrupt trigger though driver.
Can we submit this with reset queue?
Thanks.
Quoted 4 lines
Thanks
Quoted 8 lines
drivers/net/virtio/xsk.c int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag) · line 587
Quoted 7 lines
drivers/net/virtio/xsk.c +4
-0+ +__netif_tx_unlock_bh (txq); + +end:rcu_read_unlock ();return 0 ; }
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 14/15] virtio-net: xsk direct xmit inside xsk wakeup
Quoted 71 lines · Xuan Zhuo
Quoted 70 lines · Jason Wang
Quoted 55 lines · Xuan Zhuo
Calling
virtqueue_napi_schedule()in wakeup results in napi running on the current cpu. If the application is not busy, then there is no problem. But if the application itself is busy, it will cause a lot of scheduling.If the application is continuously sending data packets, due to the continuous scheduling between the application and napi, the data packet transmission will not be smooth, and there will be an obvious delay in the transmission (you can use tcpdump to see it). When pressing a channel to 100% (vhost reaches 100%), the cpu where the application is located reaches 100%.
This patch sends a small amount of data directly in wakeup. The purpose of this is to trigger the tx interrupt. The tx interrupt will be awakened on the cpu of its affinity, and then trigger the operation of the napi mechanism, napi can continue to consume the xsk tx queue. Two cpus are running, cpu0 is running applications, cpu1 executes napi consumption data. The same is to press a channel to 100%, but the utilization rate of cpu0 is 12.7% and the utilization rate of cpu1 is 2.9%.
Signed-off-by Xuan Zhuo <[email protected]>--- drivers/net/virtio/xsk.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-)drivers/net/virtio/xsk.c +9
-5@@ -547,6 +547,7 @@ int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag) {struct virtnet_info *vi =netdev_priv (dev);struct xsk_buff_pool *pool; +struct netdev_queue *txq;struct send_queue *sq;if (!netif_running (dev))@@ -559,11 +560,28 @@ int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag)rcu_read_lock (); pool =rcu_dereference (sq->xsk.pool); -if (pool) { -local_bh_disable (); -virtqueue_napi_schedule (&sq->napi, sq->vq); -local_bh_enable (); - } +if (!pool) + goto end; + +if (napi_if_scheduled_mark_missed (&sq->napi)) + goto end; + + txq =netdev_get_tx_queue (dev, qid); +drivers/net/virtio/xsk.c int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag) · line 580
Quoted 10 lines
drivers/net/virtio/xsk.c +10
-0+__netif_tx_lock_bh (txq); + +/* Send part of the packet directly to reduce the delay in sending the +* packet, and this can actively trigger the tx interrupts. +* +* If no packet is sent out, the ring of the device is full. In this +* case, we will still get a tx interrupt response. Then we will deal +* with the subsequent packet sending work. +*/ +virtnet_xsk_run (sq, pool, sq->napi.weight, false);This looks tricky, and it won't be efficient since there could be some contention on the tx lock.
Quoted 6 lines
Quoted 1 line
I wonder if we can simulate the interrupt via IPI like what RPS did.
Let me try.
Quoted 2 lines
In the long run, we may want to extend the spec to support interrupt trigger though driver.
Can we submit this with reset queue?
We need separate features. And it looks to me it's not as urgent as reset.
Thanks
Quoted 13 lines
Thanks.
Quoted 10 lines
Thanks
Quoted 7 lines
drivers/net/virtio/xsk.c +4
-0+ +__netif_tx_unlock_bh (txq); + +end:rcu_read_unlock ();return 0 ; }
Xuan Zhuo
reviewerPATCH v5 15/15 virtio-net: xsk zero copy xmit kick by threshold
In reply to Xuan ZhuoAfter testing, the performance of calling kick every time is not stable. And if all the packets are sent and kicked again, the performance is not good. So add a module parameter to specify how many packets are sent to call a kick.
8 is a relatively stable value with the best performance.
Here is the pps of the test of xsk_kick_thr under different values (from 1 to 64).
thr PPS thr PPS thr PPS 1 2924116.74247 | 23 3683263.04348 | 45 2777907.22963 2 3441010.57191 | 24 3078880.13043 | 46 2781376.21739 3 3636728.72378 | 25 2859219.57656 | 47 2777271.91304 4 3637518.61468 | 26 2851557.9593 | 48 2800320.56575 5 3651738.16251 | 27 2834783.54408 | 49 2813039.87599 6 3652176.69231 | 28 2847012.41472 | 50 3445143.01839 7 3665415.80602 | 29 2860633.91304 | 51 3666918.01281 8 3665045.16555 | 30 2857903.5786 | 52 3059929.2709 9 3671023.2401 | 31 2835589.98963 | 53 2831515.21739 10 3669532.23274 | 32 2862827.88706 | 54 3451804.07204 11 3666160.37749 | 33 2871855.96696 | 55 3654975.92385 12 3674951.44813 | 34 3434456.44816 | 56 3676198.3188 13 3667447.57331 | 35 3656918.54177 | 57 3684740.85619 14 3018846.0503 | 36 3596921.16722 | 58 3060958.8594 15 2792773.84505 | 37 3603460.63903 | 59 2828874.57191 16 3430596.3602 | 38 3595410.87666 | 60 3459926.11027 17 3660525.85806 | 39 3604250.17819 | 61 3685444.47599 18 3045627.69054 | 40 3596542.28428 | 62 3049959.0809 19 2841542.94177 | 41 3600705.16054 | 63 2806280.04013 20 2830475.97348 | 42 3019833.71191 | 64 3448494.3913 21 2845655.55789 | 43 2752951.93264 | 22 3450389.84365 | 44 2753107.27164 |
It can be found that when the value of xsk_kick_thr is relatively small, the performance is not good, and when its value is greater than 13, the performance will be more irregular and unstable. It looks similar from 3 to 13, I chose 8 as the default value.
The test environment is qemu + vhost-net. I modified vhost-net to drop the packets sent by vm directly, so that the cpu of vm can run higher. By default, the processes in the vm and the cpu of softirqd are too low, and there is no obvious difference in the test data.
During the test, the cpu of softirq reached 100%. Each xsk_kick_thr was run for 300s, the pps of every second was recorded, and the average of the pps was finally taken. The vhost process cpu on the host has also reached 100%.
--- drivers/net/virtio/virtio_net.c | 1 + drivers/net/virtio/xsk.c | 18 ++++++++++++++++-- drivers/net/virtio/xsk.h | 2 ++ 3 files changed, 19 insertions(+), 2 deletions(-)
drivers/net/virtio/virtio_net.c +1 -0
@@ -14,6 +14,7 @@ static bool csum = true, gso = true, napi_tx = true;module_param (csum, bool,0444 );module_param (gso, bool,0444 );module_param (napi_tx, bool,0644 ); +module_param (xsk_kick_thr, int,0644 );/* FIXME: MTU in config. */ #define GOOD_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
drivers/net/virtio/xsk.c +16 -2
@@ -5,6 +5,8 @@#include "virtio_net.h" +int xsk_kick_thr =8 ; +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr;static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get (struct virtnet_xsk_ctx_head *head)
@@ -455,6 +457,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq,struct xdp_desc desc;int err, packet =0 ;int ret = -EAGAIN ; +int need_kick =0 ;while (budget-- >0 ) {if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) {
@@ -475,11 +478,22 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, } ++packet; + ++need_kick; +if (need_kick > xsk_kick_thr) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + + need_kick =0 ; + } }if (packet) { -if (virtqueue_kick_prepare (sq->vq) &&virtqueue_notify (sq->vq)) - ++stats->kicks; +if (need_kick) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + } *done += packet; stats->xdp_tx += packet;
drivers/net/virtio/xsk.h +2 -0
@@ -7,6 +7,8 @@#define VIRTNET_XSK_BUFF_CTX ((void *)(unsigned long)~0L) +extern int xsk_kick_thr; +/* When xsk disable, under normal circumstances, the network card must reclaim * all the memory that has been sent and the memory added to the rq queue by * destroying the queue.
Signature · 6 lines
2.31.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 15/15] virtio-net: xsk zero copy xmit kick by threshold
Quoted 10 lines · Xuan Zhuo
After testing, the performance of calling kick every time is not stable. And if all the packets are sent and kicked again, the performance is not good. So add a module parameter to specify how many packets are sent to call a kick.
8 is a relatively stable value with the best performance.
Here is the pps of the test of
xsk_kick_thrunder different values (from 1 to 64).
Quoted 9 lines
thr PPS thr PPS thr PPS 1 2924116.74247 | 23 3683263.04348 | 45 2777907.22963 2 3441010.57191 | 24 3078880.13043 | 46 2781376.21739 3 3636728.72378 | 25 2859219.57656 | 47 2777271.91304 4 3637518.61468 | 26 2851557.9593 | 48 2800320.56575 5 3651738.16251 | 27 2834783.54408 | 49 2813039.87599 6 3652176.69231 | 28 2847012.41472 | 50 3445143.01839 7 3665415.80602 | 29 2860633.91304 | 51 3666918.01281 8 3665045.16555 | 30 2857903.5786 | 52 3059929.2709
I wonder what's the number for the case of non zc xsk?
Thanks
Quoted 109 lines
9 3671023.2401 | 31 2835589.98963 | 53 2831515.21739 10 3669532.23274 | 32 2862827.88706 | 54 3451804.07204 11 3666160.37749 | 33 2871855.96696 | 55 3654975.92385 12 3674951.44813 | 34 3434456.44816 | 56 3676198.3188 13 3667447.57331 | 35 3656918.54177 | 57 3684740.85619 14 3018846.0503 | 36 3596921.16722 | 58 3060958.8594 15 2792773.84505 | 37 3603460.63903 | 59 2828874.57191 16 3430596.3602 | 38 3595410.87666 | 60 3459926.11027 17 3660525.85806 | 39 3604250.17819 | 61 3685444.47599 18 3045627.69054 | 40 3596542.28428 | 62 3049959.0809 19 2841542.94177 | 41 3600705.16054 | 63 2806280.04013 20 2830475.97348 | 42 3019833.71191 | 64 3448494.3913 21 2845655.55789 | 43 2752951.93264 | 22 3450389.84365 | 44 2753107.27164 |It can be found that when the value of
xsk_kick_thris relatively small, the performance is not good, and when its value is greater than 13, the performance will be more irregular and unstable. It looks similar from 3 to 13, I chose 8 as the default value.The test environment is qemu + vhost-net. I modified vhost-net to drop the packets sent by vm directly, so that the cpu of vm can run higher. By default, the processes in the vm and the cpu of softirqd are too low, and there is no obvious difference in the test data.
During the test, the cpu of softirq reached 100%. Each
xsk_kick_thrwas run for 300s, the pps of every second was recorded, and the average of the pps was finally taken. The vhost process cpu on the host has also reached 100%.Signed-off-by Xuan Zhuo <[email protected]>Reviewed-by Dust Li <[email protected]>--- drivers/net/virtio/virtio_net.c | 1 + drivers/net/virtio/xsk.c | 18 ++++++++++++++++-- drivers/net/virtio/xsk.h | 2 ++ 3 files changed, 19 insertions(+), 2 deletions(-)drivers/net/virtio/virtio_net.c +1
-0@@ -14,6 +14,7 @@ static bool csum = true, gso = true, napi_tx = true;module_param (csum, bool,0444 );module_param (gso, bool,0444 );module_param (napi_tx, bool,0644 ); +module_param (xsk_kick_thr, int,0644 );/* FIXME: MTU in config. */ #define GOOD_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)drivers/net/virtio/xsk.c +16
-2@@ -5,6 +5,8 @@#include "virtio_net.h" +int xsk_kick_thr =8 ; +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr;static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get (struct virtnet_xsk_ctx_head *head)@@ -455,6 +457,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq,struct xdp_desc desc;int err, packet =0 ;int ret = -EAGAIN ; +int need_kick =0 ;while (budget-- >0 ) {if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) {@@ -475,11 +478,22 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, } ++packet; + ++need_kick; +if (need_kick > xsk_kick_thr) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + + need_kick =0 ; + } }if (packet) { -if (virtqueue_kick_prepare (sq->vq) &&virtqueue_notify (sq->vq)) - ++stats->kicks; +if (need_kick) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + } *done += packet; stats->xdp_tx += packet;drivers/net/virtio/xsk.h +2
-0@@ -7,6 +7,8 @@#define VIRTNET_XSK_BUFF_CTX ((void *)(unsigned long)~0L) +extern int xsk_kick_thr; +/* When xsk disable, under normal circumstances, the network card must reclaim * all the memory that has been sent and the memory added to the rq queue by * destroying the queue.
Xuan Zhuo
reviewerRe: [PATCH net-next v5 15/15] virtio-net: xsk zero copy xmit kick by threshold
Quoted 23 lines · Jason Wang
Quoted 10 lines · Xuan Zhuo
After testing, the performance of calling kick every time is not stable. And if all the packets are sent and kicked again, the performance is not good. So add a module parameter to specify how many packets are sent to call a kick.
8 is a relatively stable value with the best performance.
Here is the pps of the test of
xsk_kick_thrunder different values (from 1 to 64).Quoted 9 lines
thr PPS thr PPS thr PPS 1 2924116.74247 | 23 3683263.04348 | 45 2777907.22963 2 3441010.57191 | 24 3078880.13043 | 46 2781376.21739 3 3636728.72378 | 25 2859219.57656 | 47 2777271.91304 4 3637518.61468 | 26 2851557.9593 | 48 2800320.56575 5 3651738.16251 | 27 2834783.54408 | 49 2813039.87599 6 3652176.69231 | 28 2847012.41472 | 50 3445143.01839 7 3665415.80602 | 29 2860633.91304 | 51 3666918.01281 8 3665045.16555 | 30 2857903.5786 | 52 3059929.2709
Quoted 1 line
I wonder what's the number for the case of non zc xsk?
These data are used to compare the situation of sending different numbers of packets to virtio at one time. I think it has nothing to do with non-zerocopy xsk.
Thanks.
Quoted 106 lines
Thanks
Quoted 102 lines
9 3671023.2401 | 31 2835589.98963 | 53 2831515.21739 10 3669532.23274 | 32 2862827.88706 | 54 3451804.07204 11 3666160.37749 | 33 2871855.96696 | 55 3654975.92385 12 3674951.44813 | 34 3434456.44816 | 56 3676198.3188 13 3667447.57331 | 35 3656918.54177 | 57 3684740.85619 14 3018846.0503 | 36 3596921.16722 | 58 3060958.8594 15 2792773.84505 | 37 3603460.63903 | 59 2828874.57191 16 3430596.3602 | 38 3595410.87666 | 60 3459926.11027 17 3660525.85806 | 39 3604250.17819 | 61 3685444.47599 18 3045627.69054 | 40 3596542.28428 | 62 3049959.0809 19 2841542.94177 | 41 3600705.16054 | 63 2806280.04013 20 2830475.97348 | 42 3019833.71191 | 64 3448494.3913 21 2845655.55789 | 43 2752951.93264 | 22 3450389.84365 | 44 2753107.27164 |It can be found that when the value of
xsk_kick_thris relatively small, the performance is not good, and when its value is greater than 13, the performance will be more irregular and unstable. It looks similar from 3 to 13, I chose 8 as the default value.The test environment is qemu + vhost-net. I modified vhost-net to drop the packets sent by vm directly, so that the cpu of vm can run higher. By default, the processes in the vm and the cpu of softirqd are too low, and there is no obvious difference in the test data.
During the test, the cpu of softirq reached 100%. Each
xsk_kick_thrwas run for 300s, the pps of every second was recorded, and the average of the pps was finally taken. The vhost process cpu on the host has also reached 100%.Signed-off-by Xuan Zhuo <[email protected]>Reviewed-by Dust Li <[email protected]>--- drivers/net/virtio/virtio_net.c | 1 + drivers/net/virtio/xsk.c | 18 ++++++++++++++++-- drivers/net/virtio/xsk.h | 2 ++ 3 files changed, 19 insertions(+), 2 deletions(-)drivers/net/virtio/virtio_net.c +1
-0@@ -14,6 +14,7 @@ static bool csum = true, gso = true, napi_tx = true;module_param (csum, bool,0444 );module_param (gso, bool,0444 );module_param (napi_tx, bool,0644 ); +module_param (xsk_kick_thr, int,0644 );/* FIXME: MTU in config. */ #define GOOD_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)drivers/net/virtio/xsk.c +16
-2@@ -5,6 +5,8 @@#include "virtio_net.h" +int xsk_kick_thr =8 ; +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr;static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get (struct virtnet_xsk_ctx_head *head)@@ -455,6 +457,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq,struct xdp_desc desc;int err, packet =0 ;int ret = -EAGAIN ; +int need_kick =0 ;while (budget-- >0 ) {if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) {@@ -475,11 +478,22 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, } ++packet; + ++need_kick; +if (need_kick > xsk_kick_thr) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + + need_kick =0 ; + } }if (packet) { -if (virtqueue_kick_prepare (sq->vq) &&virtqueue_notify (sq->vq)) - ++stats->kicks; +if (need_kick) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + } *done += packet; stats->xdp_tx += packet;drivers/net/virtio/xsk.h +0
-0@@ -7,6 +7,8 @@
Quoted 8 lines
drivers/net/virtio/xsk.h line 14
Quoted 7 lines
drivers/net/virtio/xsk.h +2
-0#define VIRTNET_XSK_BUFF_CTX ((void *)(unsigned long)~0L) +extern int xsk_kick_thr; +/* When xsk disable, under normal circumstances, the network card must reclaim * all the memory that has been sent and the memory added to the rq queue by * destroying the queue.
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next v5 15/15] virtio-net: xsk zero copy xmit kick by threshold
Quoted 22 lines · Xuan Zhuo
Quoted 21 lines · Jason Wang
Quoted 19 lines · Xuan Zhuo
After testing, the performance of calling kick every time is not stable. And if all the packets are sent and kicked again, the performance is not good. So add a module parameter to specify how many packets are sent to call a kick.
8 is a relatively stable value with the best performance.
Here is the pps of the test of
xsk_kick_thrunder different values (from 1 to 64).thr PPS thr PPS thr PPS 1 2924116.74247 | 23 3683263.04348 | 45 2777907.22963 2 3441010.57191 | 24 3078880.13043 | 46 2781376.21739 3 3636728.72378 | 25 2859219.57656 | 47 2777271.91304 4 3637518.61468 | 26 2851557.9593 | 48 2800320.56575 5 3651738.16251 | 27 2834783.54408 | 49 2813039.87599 6 3652176.69231 | 28 2847012.41472 | 50 3445143.01839 7 3665415.80602 | 29 2860633.91304 | 51 3666918.01281 8 3665045.16555 | 30 2857903.5786 | 52 3059929.2709
Quoted 5 lines
Quoted 1 line
I wonder what's the number for the case of non zc xsk?
These data are used to compare the situation of sending different numbers of packets to virtio at one time. I think it has nothing to do with non-zerocopy xsk.
Yes, but it would be helpful to see how much we can gain from zerocopy.
Thanks
Quoted 115 lines
Thanks.
Quoted 112 lines
Thanks
Quoted 109 lines
9 3671023.2401 | 31 2835589.98963 | 53 2831515.21739 10 3669532.23274 | 32 2862827.88706 | 54 3451804.07204 11 3666160.37749 | 33 2871855.96696 | 55 3654975.92385 12 3674951.44813 | 34 3434456.44816 | 56 3676198.3188 13 3667447.57331 | 35 3656918.54177 | 57 3684740.85619 14 3018846.0503 | 36 3596921.16722 | 58 3060958.8594 15 2792773.84505 | 37 3603460.63903 | 59 2828874.57191 16 3430596.3602 | 38 3595410.87666 | 60 3459926.11027 17 3660525.85806 | 39 3604250.17819 | 61 3685444.47599 18 3045627.69054 | 40 3596542.28428 | 62 3049959.0809 19 2841542.94177 | 41 3600705.16054 | 63 2806280.04013 20 2830475.97348 | 42 3019833.71191 | 64 3448494.3913 21 2845655.55789 | 43 2752951.93264 | 22 3450389.84365 | 44 2753107.27164 |It can be found that when the value of
xsk_kick_thris relatively small, the performance is not good, and when its value is greater than 13, the performance will be more irregular and unstable. It looks similar from 3 to 13, I chose 8 as the default value.The test environment is qemu + vhost-net. I modified vhost-net to drop the packets sent by vm directly, so that the cpu of vm can run higher. By default, the processes in the vm and the cpu of softirqd are too low, and there is no obvious difference in the test data.
During the test, the cpu of softirq reached 100%. Each
xsk_kick_thrwas run for 300s, the pps of every second was recorded, and the average of the pps was finally taken. The vhost process cpu on the host has also reached 100%.Signed-off-by Xuan Zhuo <[email protected]>Reviewed-by Dust Li <[email protected]>--- drivers/net/virtio/virtio_net.c | 1 + drivers/net/virtio/xsk.c | 18 ++++++++++++++++-- drivers/net/virtio/xsk.h | 2 ++ 3 files changed, 19 insertions(+), 2 deletions(-)drivers/net/virtio/virtio_net.c +1
-0@@ -14,6 +14,7 @@ static bool csum = true, gso = true, napi_tx = true;module_param (csum, bool,0444 );module_param (gso, bool,0444 );module_param (napi_tx, bool,0644 ); +module_param (xsk_kick_thr, int,0644 );/* FIXME: MTU in config. */ #define GOOD_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)drivers/net/virtio/xsk.c +16
-2@@ -5,6 +5,8 @@#include "virtio_net.h" +int xsk_kick_thr =8 ; +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr;static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get (struct virtnet_xsk_ctx_head *head)@@ -455,6 +457,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq,struct xdp_desc desc;int err, packet =0 ;int ret = -EAGAIN ; +int need_kick =0 ;while (budget-- >0 ) {if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) {@@ -475,11 +478,22 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, } ++packet; + ++need_kick; +if (need_kick > xsk_kick_thr) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + + need_kick =0 ; + } }if (packet) { -if (virtqueue_kick_prepare (sq->vq) &&virtqueue_notify (sq->vq)) - ++stats->kicks; +if (need_kick) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + } *done += packet; stats->xdp_tx += packet;drivers/net/virtio/xsk.h +2
-0@@ -7,6 +7,8 @@#define VIRTNET_XSK_BUFF_CTX ((void *)(unsigned long)~0L) +extern int xsk_kick_thr; +/* When xsk disable, under normal circumstances, the network card must reclaim * all the memory that has been sent and the memory added to the rq queue by * destroying the queue.
Xuan Zhuo
reviewerRe: [PATCH net-next v5 15/15] virtio-net: xsk zero copy xmit kick by threshold
Quoted 24 lines · Jason Wang
Quoted 22 lines · Xuan Zhuo
Quoted 21 lines · Jason Wang
Quoted 19 lines · Xuan Zhuo
After testing, the performance of calling kick every time is not stable. And if all the packets are sent and kicked again, the performance is not good. So add a module parameter to specify how many packets are sent to call a kick.
8 is a relatively stable value with the best performance.
Here is the pps of the test of
xsk_kick_thrunder different values (from 1 to 64).thr PPS thr PPS thr PPS 1 2924116.74247 | 23 3683263.04348 | 45 2777907.22963 2 3441010.57191 | 24 3078880.13043 | 46 2781376.21739 3 3636728.72378 | 25 2859219.57656 | 47 2777271.91304 4 3637518.61468 | 26 2851557.9593 | 48 2800320.56575 5 3651738.16251 | 27 2834783.54408 | 49 2813039.87599 6 3652176.69231 | 28 2847012.41472 | 50 3445143.01839 7 3665415.80602 | 29 2860633.91304 | 51 3666918.01281 8 3665045.16555 | 30 2857903.5786 | 52 3059929.2709
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
I wonder what's the number for the case of non zc xsk?
These data are used to compare the situation of sending different numbers of packets to virtio at one time. I think it has nothing to do with non-zerocopy xsk.
Yes, but it would be helpful to see how much we can gain from zerocopy.
Okay, I will add the performance data of no-zerocopy xsk in the next patch set.
Thanks.
Quoted 112 lines
Thanks
Quoted 108 lines
Thanks.
Quoted 105 lines
Thanks
Quoted 102 lines
9 3671023.2401 | 31 2835589.98963 | 53 2831515.21739 10 3669532.23274 | 32 2862827.88706 | 54 3451804.07204 11 3666160.37749 | 33 2871855.96696 | 55 3654975.92385 12 3674951.44813 | 34 3434456.44816 | 56 3676198.3188 13 3667447.57331 | 35 3656918.54177 | 57 3684740.85619 14 3018846.0503 | 36 3596921.16722 | 58 3060958.8594 15 2792773.84505 | 37 3603460.63903 | 59 2828874.57191 16 3430596.3602 | 38 3595410.87666 | 60 3459926.11027 17 3660525.85806 | 39 3604250.17819 | 61 3685444.47599 18 3045627.69054 | 40 3596542.28428 | 62 3049959.0809 19 2841542.94177 | 41 3600705.16054 | 63 2806280.04013 20 2830475.97348 | 42 3019833.71191 | 64 3448494.3913 21 2845655.55789 | 43 2752951.93264 | 22 3450389.84365 | 44 2753107.27164 |It can be found that when the value of
xsk_kick_thris relatively small, the performance is not good, and when its value is greater than 13, the performance will be more irregular and unstable. It looks similar from 3 to 13, I chose 8 as the default value.The test environment is qemu + vhost-net. I modified vhost-net to drop the packets sent by vm directly, so that the cpu of vm can run higher. By default, the processes in the vm and the cpu of softirqd are too low, and there is no obvious difference in the test data.
During the test, the cpu of softirq reached 100%. Each
xsk_kick_thrwas run for 300s, the pps of every second was recorded, and the average of the pps was finally taken. The vhost process cpu on the host has also reached 100%.Signed-off-by Xuan Zhuo <[email protected]>Reviewed-by Dust Li <[email protected]>--- drivers/net/virtio/virtio_net.c | 1 + drivers/net/virtio/xsk.c | 18 ++++++++++++++++-- drivers/net/virtio/xsk.h | 2 ++ 3 files changed, 19 insertions(+), 2 deletions(-)drivers/net/virtio/virtio_net.c +1
-0@@ -14,6 +14,7 @@ static bool csum = true, gso = true, napi_tx = true;module_param (csum, bool,0444 );module_param (gso, bool,0444 );module_param (napi_tx, bool,0644 ); +module_param (xsk_kick_thr, int,0644 );/* FIXME: MTU in config. */ #define GOOD_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)drivers/net/virtio/xsk.c +16
-2@@ -5,6 +5,8 @@#include "virtio_net.h" +int xsk_kick_thr =8 ; +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr;static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get (struct virtnet_xsk_ctx_head *head)@@ -455,6 +457,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq,struct xdp_desc desc;int err, packet =0 ;int ret = -EAGAIN ; +int need_kick =0 ;while (budget-- >0 ) {if (sq->vq->num_free <2 +MAX_SKB_FRAGS ) {@@ -475,11 +478,22 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, } ++packet; + ++need_kick; +if (need_kick > xsk_kick_thr) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + + need_kick =0 ; + } }if (packet) { -if (virtqueue_kick_prepare (sq->vq) &&virtqueue_notify (sq->vq)) - ++stats->kicks; +if (need_kick) { +if (virtqueue_kick_prepare (sq->vq) && +virtqueue_notify (sq->vq)) + ++stats->kicks; + } *done += packet; stats->xdp_tx += packet;drivers/net/virtio/xsk.h +0
-0@@ -7,6 +7,8 @@
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
drivers/net/virtio/xsk.h line 14
Quoted 7 lines
drivers/net/virtio/xsk.h +2
-0#define VIRTNET_XSK_BUFF_CTX ((void *)(unsigned long)~0L) +extern int xsk_kick_thr; +/* When xsk disable, under normal circumstances, the network card must reclaim * all the memory that has been sent and the memory added to the rq queue by * destroying the queue.
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization