bus: mhi: core: Use mhi_soc_reset() API instead of register write
Subsystems (2)
PATCH 1/1 bus: mhi: core: Use mhi_soc_reset() API instead of register write
Currently, register writes are used when ramdump collection in panic path occurs. Replace that with new mhi_soc_reset() API such that a controller defined reset() function is exercised if one is present and the regular SOC reset is done if it is not.
Signed-off-by Bhaumik Bhatt <[email protected]>
--- drivers/bus/mhi/core/boot.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/bus/mhi/core/boot.c +1 -3
@@ -112,9 +112,7 @@ static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)/* Hardware reset so force device to enter RDDM */ dev_dbg (dev,"Did not enter RDDM, do a host req reset\n" ); -mhi_write_reg (mhi_cntrl, mhi_cntrl->regs, -MHI_SOC_RESET_REQ_OFFSET , -MHI_SOC_RESET_REQ ); +mhi_soc_reset (mhi_cntrl);udelay (delayus); }
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoted 7 lines · Bhaumik Bhatt
Currently, register writes are used when ramdump collection in panic path occurs. Replace that with new
mhi_soc_reset()API such that a controller definedreset()function is exercised if one is present and the regular SOC reset is done if it is not.Signed-off-by Bhaumik Bhatt <[email protected]>---
Reviewed-by Hemant Kumar <[email protected]>
Signature · 1 line
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project