Skip to contentSkip to conversation

drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers

PATCH Applied Michael Kelley 2 participants 3 messages Jul 14, 2021 – Jul 19, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers

Hyper-V clock/timer code in hyperv_timer.c is mostly independent from other VMbus drivers, but building for ARM64 without hyperv_timer.c shows some remaining entanglements. A default implementation of hv_read_reference_counter can just read a Hyper-V synthetic register and be independent of hyperv_timer.c, so move this code out and into hv_common.c. Then it can be used by the timesync driver even if hyperv_timer.c isn't built on a particular architecture. If hyperv_timer.c *is* built, it can override with a faster implementation.

Also provide stubs for stimer functions called by the VMbus driver when hyperv_timer.c isn't built.

No functional changes.

---
 drivers/clocksource/hyperv_timer.c |  3 ---
 drivers/hv/hv_common.c             | 14 ++++++++++++++
 drivers/hv/hv_util.c               |  5 -----
 include/asm-generic/mshyperv.h     |  2 ++
 include/clocksource/hyperv_timer.h | 11 +++++++++--
 5 files changed, 25 insertions(+), 10 deletions(-)
drivers/clocksource/hyperv_timer.c +0 -3
index d6ece7b..ff188ab 100644
@@ -361,9 +361,6 @@ void hv_stimer_global_cleanup(void)
  * Hyper-V and 32-bit x86.  The TSC reference page version is preferred.
  */
 
-u64 (*hv_read_reference_counter)(void);
-EXPORT_SYMBOL_GPL(hv_read_reference_counter);
-
 static union {
 	struct ms_hyperv_tsc_page page;
 	u8 reserved[PAGE_SIZE];
drivers/hv/hv_common.c +14 -0
index 3ff8446..e213433 100644
@@ -215,6 +215,20 @@ bool hv_is_hibernation_supported(void)
 }
 EXPORT_SYMBOL_GPL(hv_is_hibernation_supported);
 
+/*
+ * Default function to read the Hyper-V reference counter, independent
+ * of whether Hyper-V enlightened clocks/timers are being used. But on
+ * architectures where it is used, Hyper-V enlightenment code in
+ * hyperv_timer.c may override this function.
+ */
+static u64 __hv_read_ref_counter(void)
+{
+	return hv_get_register(HV_REGISTER_TIME_REF_COUNT);
+}
+
+u64 (*hv_read_reference_counter)(void) = __hv_read_ref_counter;
+EXPORT_SYMBOL_GPL(hv_read_reference_counter);
+
 /* These __weak functions provide default "no-op" behavior and
  * may be overridden by architecture specific versions. Architectures
  * for which the default "no-op" behavior is sufficient can leave
drivers/hv/hv_util.c +0 -5
index 136576c..835e603 100644
@@ -17,7 +17,6 @@
 #include <linux/hyperv.h>
 #include <linux/clockchips.h>
 #include <linux/ptp_clock_kernel.h>
-#include <clocksource/hyperv_timer.h>
 #include <asm/mshyperv.h>
 
 #include "hyperv_vmbus.h"
@@ -735,10 +734,6 @@ static int hv_ptp_gettime(struct ptp_clock_info *info, struct timespec64 *ts)
 
 static int hv_timesync_init(struct hv_util_service *srv)
 {
-	/* TimeSync requires Hyper-V clocksource. */
-	if (!hv_read_reference_counter)
-		return -ENODEV;
-
 	spin_lock_init(&host_ts.lock);
 
 	INIT_WORK(&adj_time_work, hv_set_host_time);
include/asm-generic/mshyperv.h +2 -0
index 2a187fe..f6245fe 100644
@@ -166,6 +166,8 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
 extern u32 *hv_vp_index;
 extern u32 hv_max_vp_index;
 
+extern u64 (*hv_read_reference_counter)(void);
+
 /* Sentinel value for an uninitialized entry in hv_vp_index array */
 #define VP_INVAL	U32_MAX
 
include/clocksource/hyperv_timer.h +9 -2
index b6774aa..1c566c7 100644
@@ -20,6 +20,8 @@
 #define HV_MAX_MAX_DELTA_TICKS 0xffffffff
 #define HV_MIN_DELTA_TICKS 1
 
+#ifdef CONFIG_HYPERV_TIMER
+
 /* Routines called by the VMbus driver */
 extern int hv_stimer_alloc(bool have_percpu_irqs);
 extern int hv_stimer_cleanup(unsigned int cpu);
@@ -28,8 +30,6 @@
 extern void hv_stimer_global_cleanup(void);
 extern void hv_stimer0_isr(void);
 
-#ifdef CONFIG_HYPERV_TIMER
-extern u64 (*hv_read_reference_counter)(void);
 extern void hv_init_clocksource(void);
 
 extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void);
@@ -100,6 +100,13 @@ static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
 {
 	return U64_MAX;
 }
+
+static inline int hv_stimer_cleanup(unsigned int cpu) {return 0; }
+static inline void hv_stimer_legacy_init(unsigned int cpu, int sint) {}
+static inline void hv_stimer_legacy_cleanup(unsigned int cpu) {}
+static inline void hv_stimer_global_cleanup(void) {}
+static inline void hv_stimer0_isr(void) {}
+
 #endif /* CONFIG_HYPERV_TIMER */
 
 #endif
Signature · 1 line
1.8.3.1
maintainer
#1 lore raw

On Tue, Jul 13, 2021 at 05:01:46PM -0700, Michael Kelley wrote:
[...]

Quoted 24 lines
include/clocksource/hyperv_timer.h +2 -2
index b6774aa..1c566c7 100644
@@ -20,6 +20,8 @@
 #define HV_MAX_MAX_DELTA_TICKS 0xffffffff
 #define HV_MIN_DELTA_TICKS 1
 
+#ifdef CONFIG_HYPERV_TIMER
+
 /* Routines called by the VMbus driver */
 extern int hv_stimer_alloc(bool have_percpu_irqs);
 extern int hv_stimer_cleanup(unsigned int cpu);
@@ -28,8 +30,6 @@
 extern void hv_stimer_global_cleanup(void);
 extern void hv_stimer0_isr(void);
 
-#ifdef CONFIG_HYPERV_TIMER
-extern u64 (*hv_read_reference_counter)(void);
 extern void hv_init_clocksource(void);
 
 extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void);

include/clocksource/hyperv_timer.h static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg, · line 104

Quoted 5 lines
include/clocksource/hyperv_timer.h +2 -0
@@ -100,6 +100,13 @@ static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
 {
 	return U64_MAX;
 }
+
+static inline int hv_stimer_cleanup(unsigned int cpu) {return 0; }

Nit: missing space before "return". No need to resend just for this.

Wei.

maintainer Applied
#2 lore raw
In reply to Michael Kelley
Quoted 9 lines · Michael Kelley

Hyper-V clock/timer code in hyperv_timer.c is mostly independent from other VMbus drivers, but building for ARM64 without hyperv_timer.c shows some remaining entanglements. A default implementation of hv_read_reference_counter can just read a Hyper-V synthetic register and be independent of hyperv_timer.c, so move this code out and into hv_common.c. Then it can be used by the timesync driver even if hyperv_timer.c isn't built on a particular architecture. If hyperv_timer.c *is* built, it can override with a faster implementation.

Quoted 6 lines

Also provide stubs for stimer functions called by the VMbus driver when hyperv_timer.c isn't built.

No functional changes.

Applied to hyperv-next. Thanks.