Skip to contentSkip to conversation

regulator: rtq6752: fix reg reset behavior

PATCH In review cy_huang 2 participants 2 messages Jul 16, 2021 Voltage and current regulator framework

lore
Share & tools
lore

cy_huang

author
#0 lore raw

PATCH 1/1 regulator: rtq6752: fix reg reset behavior

From: ChiYuan Huang <[email protected]>

Reg will be reset in below two conditions.
1. 'Enable' pin from H to L.
2. Both PAVDD and NAVDD are all disabled.

And 'Enable' pin also control i2c communication capability.

This patch is to Seperate the if condition in enable/disable callback for reg cache manipulation.

---
Hi,
Normally, during testing, I consider only 'enable' will cause reg to be reset. But after consulting our RD, this reset behavior not just 'Enable' H to L, both powers are disabled, also.

This patch is used to fix this.

---
 drivers/regulator/rtq6752-regulator.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/regulator/rtq6752-regulator.c +7 -3
index 72a72aa..609d3fc 100644
@@ -54,12 +54,14 @@ static int rtq6752_set_vdd_enable(struct regulator_dev *rdev)
 	int rid = rdev_get_id(rdev), ret;
 
 	mutex_lock(&priv->lock);
-	if (!priv->enable_flag && priv->enable_gpio) {
+	if (priv->enable_gpio) {
 		gpiod_set_value(priv->enable_gpio, 1);
 
 		usleep_range(RTQ6752_I2CRDY_TIMEUS,
 			     RTQ6752_I2CRDY_TIMEUS + 100);
+	}
 
+	if (!priv->enable_flag) {
 		regcache_cache_only(priv->regmap, false);
 		ret = regcache_sync(priv->regmap);
 		if (ret) {
@@ -86,12 +88,14 @@ static int rtq6752_set_vdd_disable(struct regulator_dev *rdev)
 	mutex_lock(&priv->lock);
 	priv->enable_flag &= ~BIT(rid);
 
-	if (!priv->enable_flag && priv->enable_gpio) {
+	if (!priv->enable_flag) {
 		regcache_cache_only(priv->regmap, true);
 		regcache_mark_dirty(priv->regmap);
+	}
 
+	if (priv->enable_gpio)
 		gpiod_set_value(priv->enable_gpio, 0);
-	}
+
 	mutex_unlock(&priv->lock);
 
 	return 0;
Signature · 1 line
2.7.4
maintainer
#1 lore raw
Quoted 8 lines · cy_huang

Reg will be reset in below two conditions.
1. 'Enable' pin from H to L.
2. Both PAVDD and NAVDD are all disabled.

And 'Enable' pin also control i2c communication capability.

This patch is to Seperate the if condition in enable/disable callback for reg cache manipulation.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: rtq6752: fix reg reset behavior

      commit: 513d14045a2dad0bf202b7d4c07a2ca2afdba0b4

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark