Skip to contentSkip to conversation

Convert qcom pmic gpio bindings to YAML

PATCH Superseded satya priya 3 participants 5 messages Jul 19, 2021

Subsystems (6)
Device tree bindings Arm Qualcomm mailing list GPIO Pin control +2 more subsystems

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

satya priya

author
#0 lore raw

v6 cover Convert qcom pmic gpio bindings to YAML

satya priya (2):
dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings
to YAML
dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property

 .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 288 ---------------------
 .../bindings/pinctrl/qcom,pmic-gpio.yaml           | 239 +++++++++++++++++
 2 files changed, 239 insertions(+), 288 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation
author
#1 lore raw

PATCH v6 1/2 dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML

Convert Qualcomm PMIC GPIO bindings from .txt to .yaml format.

Signed-off-by satya priya <[email protected]>
Reviewed-by Rob Herring <[email protected]>

---
Changes in V2:
- As per Rob's comments fixed bot erros.
- Moved this patch to end of the series so that other patches are not blocked on this.

Changes in V3:
- As per Rob's comments, added maxItems for reg and interrupts. Added reference of "pinmux-node.yaml" and "pincfg-node.yaml". Made 'additionalProperties' as false.

Changes in V4:
- As per Rob's comments, added description for interrupts, defined constraints for "qcom,drive-strength", dropped description for function property.

Changes in RESEND V4:
- Rebased on linux-next and sent.

Changes in V5:
- Fixed Bjorn's comments on [1]

[1] https://lore.kernel.org/patchwork/patch/1434144/

Changes in V6:
- As per Bjorn's comments, removed formatting for description, changed node name to be more specific to qcom pmic, and fixed few other minor things as suggested here [2].

[2] https://lore.kernel.org/patchwork/patch/1452812/#1654560

 .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 288 ---------------------
 .../bindings/pinctrl/qcom,pmic-gpio.yaml           | 259 ++++++++++++++++++
 2 files changed, 259 insertions(+), 288 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt deleted +0 -288
deleted file mode 100644
index 161216d..0000000
@@ -1,288 +0,0 @@
-Qualcomm PMIC GPIO block
-
-This binding describes the GPIO block(s) found in the 8xxx series of
-PMIC's from Qualcomm.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8005-gpio"
-		    "qcom,pm8018-gpio"
-		    "qcom,pm8038-gpio"
-		    "qcom,pm8058-gpio"
-		    "qcom,pm8916-gpio"
-		    "qcom,pm8917-gpio"
-		    "qcom,pm8921-gpio"
-		    "qcom,pm8941-gpio"
-		    "qcom,pm8950-gpio"
-		    "qcom,pm8994-gpio"
-		    "qcom,pm8998-gpio"
-		    "qcom,pma8084-gpio"
-		    "qcom,pmi8950-gpio"
-		    "qcom,pmi8994-gpio"
-		    "qcom,pmi8998-gpio"
-		    "qcom,pms405-gpio"
-		    "qcom,pm660-gpio"
-		    "qcom,pm660l-gpio"
-		    "qcom,pm8150-gpio"
-		    "qcom,pm8150b-gpio"
-		    "qcom,pm8350-gpio"
-		    "qcom,pm8350b-gpio"
-		    "qcom,pm8350c-gpio"
-		    "qcom,pmk8350-gpio"
-		    "qcom,pm7325-gpio"
-		    "qcom,pmr735a-gpio"
-		    "qcom,pmr735b-gpio"
-		    "qcom,pm6150-gpio"
-		    "qcom,pm6150l-gpio"
-		    "qcom,pm8008-gpio"
-		    "qcom,pmx55-gpio"
-
-		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
-		    if the device is on an spmi bus or an ssbi bus respectively
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register base of the GPIO block and length.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Must contain an array of encoded interrupt specifiers for
-		    each available GPIO
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: Mark the device node as a GPIO controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 2;
-		    the first cell will be used to define gpio number and the
-		    second denotes the flags for this gpio
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin or a list of pins. This configuration can include the
-mux function to select on those pin(s), and various pin configuration
-parameters, as listed below.
-
-
-SUBNODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    gpio1-gpio4 for pm8005
-		    gpio1-gpio6 for pm8018
-		    gpio1-gpio12 for pm8038
-		    gpio1-gpio40 for pm8058
-		    gpio1-gpio4 for pm8916
-		    gpio1-gpio38 for pm8917
-		    gpio1-gpio44 for pm8921
-		    gpio1-gpio36 for pm8941
-		    gpio1-gpio8 for pm8950 (hole on gpio3)
-		    gpio1-gpio22 for pm8994
-		    gpio1-gpio26 for pm8998
-		    gpio1-gpio22 for pma8084
-		    gpio1-gpio2 for pmi8950
-		    gpio1-gpio10 for pmi8994
-		    gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10)
-		    gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, gpio7
-					     and gpio8)
-		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
-		    gpio1-gpio12 for pm8150l (hole on gpio7)
-		    gpio1-gpio10 for pm8350
-		    gpio1-gpio8 for pm8350b
-		    gpio1-gpio9 for pm8350c
-		    gpio1-gpio4 for pmk8350
-		    gpio1-gpio10 for pm7325
-		    gpio1-gpio4 for pmr735a
-		    gpio1-gpio4 for pmr735b
-		    gpio1-gpio10 for pm6150
-		    gpio1-gpio12 for pm6150l
-		    gpio1-gpio2 for pm8008
-		    gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
-					    and gpio11)
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins.  Valid values are:
-		    "normal",
-		    "paired",
-		    "func1",
-		    "func2",
-		    "dtest1",
-		    "dtest2",
-		    "dtest3",
-		    "dtest4",
-		    And following values are supported by LV/MV GPIO subtypes:
-		    "func3",
-		    "func4"
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <empty>
-	Definition: The specified pins should be configured as pull up.
-
-- qcom,pull-up-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Specifies the strength to use for pull up, if selected.
-		    Valid values are; as defined in
-		    <dt-bindings/pinctrl/qcom,pmic-gpio.h>:
-		    1: 30uA                     (PMIC_GPIO_PULL_UP_30)
-		    2: 1.5uA                    (PMIC_GPIO_PULL_UP_1P5)
-		    3: 31.5uA                   (PMIC_GPIO_PULL_UP_31P5)
-		    4: 1.5uA + 30uA boost       (PMIC_GPIO_PULL_UP_1P5_30)
-		    If this property is omitted 30uA strength will be used if
-		    pull up is selected
-
-- bias-high-impedance:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins will put in high-Z mode and disabled.
-
-- input-enable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are put in input mode.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-
-- power-source:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the power source for the specified pins. Valid
-		    power sources are defined per chip in
-		    <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-- qcom,drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins. Value
-		    drive strengths are:
-		    0: no (PMIC_GPIO_STRENGTH_NO)
-		    1: high (PMIC_GPIO_STRENGTH_HIGH) 0.9mA @ 1.8V - 1.9mA @ 2.6V
-		    2: medium (PMIC_GPIO_STRENGTH_MED) 0.6mA @ 1.8V - 1.25mA @ 2.6V
-		    3: low (PMIC_GPIO_STRENGTH_LOW) 0.15mA @ 1.8V - 0.3mA @ 2.6V
-		    as defined in <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-- drive-push-pull:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in push-pull mode.
-
-- drive-open-drain:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in open-drain mode.
-
-- drive-open-source:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in open-source mode.
-
-- qcom,analog-pass:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in analog-pass-through mode.
-
-- qcom,atest:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects ATEST rail to route to GPIO when it's configured
-		    in analog-pass-through mode.
-		    Valid values are 1-4 corresponding to ATEST1 to ATEST4.
-
-- qcom,dtest-buffer:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects DTEST rail to route to GPIO when it's configured
-		    as digital input.
-		    Valid values are 1-4 corresponding to DTEST1 to DTEST4.
-
-Example:
-
-	pm8921_gpio: gpio@150 {
-		compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
-		reg = <0x150 0x160>;
-		interrupts = <192 1>, <193 1>, <194 1>,
-			     <195 1>, <196 1>, <197 1>,
-			     <198 1>, <199 1>, <200 1>,
-			     <201 1>, <202 1>, <203 1>,
-			     <204 1>, <205 1>, <206 1>,
-			     <207 1>, <208 1>, <209 1>,
-			     <210 1>, <211 1>, <212 1>,
-			     <213 1>, <214 1>, <215 1>,
-			     <216 1>, <217 1>, <218 1>,
-			     <219 1>, <220 1>, <221 1>,
-			     <222 1>, <223 1>, <224 1>,
-			     <225 1>, <226 1>, <227 1>,
-			     <228 1>, <229 1>, <230 1>,
-			     <231 1>, <232 1>, <233 1>,
-			     <234 1>, <235 1>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		pm8921_gpio_keys: gpio-keys {
-			volume-keys {
-				pins = "gpio20", "gpio21";
-				function = "normal";
-
-				input-enable;
-				bias-pull-up;
-				drive-push-pull;
-				qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-				power-source = <PM8921_GPIO_S4>;
-			};
-		};
-	};
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml new file +259 -0

259 lines not on this page · raw message

Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation
maintainer
#2 lore raw

Re: [PATCH V6 1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML

Quoted 33 lines · satya priya

Convert Qualcomm PMIC GPIO bindings from .txt to .yaml format.

Signed-off-by satya priya <[email protected]>
Reviewed-by Rob Herring <[email protected]>

---
Changes in V2:
- As per Rob's comments fixed bot erros.
- Moved this patch to end of the series so that other patches are not blocked on this.

Changes in V3:
- As per Rob's comments, added maxItems for reg and interrupts. Added reference of "pinmux-node.yaml" and "pincfg-node.yaml". Made 'additionalProperties' as false.

Changes in V4:
- As per Rob's comments, added description for interrupts, defined constraints for "qcom,drive-strength", dropped description for function property.

Changes in RESEND V4:
- Rebased on linux-next and sent.

Changes in V5:
- Fixed Bjorn's comments on [1]

[1] https://lore.kernel.org/patchwork/patch/1434144/

Changes in V6:
- As per Bjorn's comments, removed formatting for description, changed node name to be more specific to qcom pmic, and fixed few other minor things as suggested here [2].

Quoted 8 lines

[2] https://lore.kernel.org/patchwork/patch/1452812/#1654560

 .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 288 ---------------------
 .../bindings/pinctrl/qcom,pmic-gpio.yaml           | 259 ++++++++++++++++++
 2 files changed, 259 insertions(+), 288 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: compatible: ['qcom,pm8008-gpio'] is too short
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: 'gpio-ranges' is a required property
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1506906

This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:

pip3 install dtschema --upgrade

Please check and re-submit.

author
#3 lore raw

PATCH v6 2/2 dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property

In reply to satya priya

Remove the interrupts property as we no longer specify it.

Signed-off-by satya priya <[email protected]>
Acked-by Rob Herring <[email protected]>

---
Changes in V5:
- This is newly added in V5.As per Bjorn's comments on [1] removed the interrupts property as it is no longer used.

[1] https://lore.kernel.org/patchwork/patch/1434144/

Changes in V6:
- No changes.

 .../bindings/pinctrl/qcom,pmic-gpio.yaml           | 28 ++++------------------
 1 file changed, 4 insertions(+), 24 deletions(-)
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +4 -24
index 7a0d2d8..9bd01db 100644
@@ -56,18 +56,11 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    minItems: 1
-    maxItems: 44
-    description:
-      Must contain an array of encoded interrupt specifiers for
-      each available GPIO
+  interrupt-controller: true
 
   '#interrupt-cells':
     const: 2
 
-  interrupt-controller: true
-
   gpio-controller: true
 
   gpio-ranges:

@@ -87,6 +80,7 @@ required:
   - gpio-controller
   - '#gpio-cells'
   - gpio-ranges
+  - interrupt-controller
 
 patternProperties:
   '-state$':

@@ -223,22 +217,8 @@ examples:
     pm8921_gpio: gpio@150 {
       compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
       reg = <0x150 0x160>;
-      interrupts = <192 1>, <193 1>, <194 1>,
-                   <195 1>, <196 1>, <197 1>,
-                   <198 1>, <199 1>, <200 1>,
-                   <201 1>, <202 1>, <203 1>,
-                   <204 1>, <205 1>, <206 1>,
-                   <207 1>, <208 1>, <209 1>,
-                   <210 1>, <211 1>, <212 1>,
-                   <213 1>, <214 1>, <215 1>,
-                   <216 1>, <217 1>, <218 1>,
-                   <219 1>, <220 1>, <221 1>,
-                   <222 1>, <223 1>, <224 1>,
-                   <225 1>, <226 1>, <227 1>,
-                   <228 1>, <229 1>, <230 1>,
-                   <231 1>, <232 1>, <233 1>,
-                   <234 1>, <235 1>;
-
+      interrupt-controller;
+      #interrupt-cells = <2>;
       gpio-controller;
       gpio-ranges = <&pm8921_gpio 0 0 44>;
       #gpio-cells = <2>;
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation
Reviewed-by on v6 2/2
#4 lore raw

Re: [PATCH V6 2/2] dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property

Quoted 4 lines · satya priya

Remove the interrupts property as we no longer specify it.

Signed-off-by satya priya <[email protected]>
Acked-by Rob Herring <[email protected]>
Reviewed-by Bjorn Andersson <[email protected]>

Regards,
Bjorn

Quoted 74 lines

---
Changes in V5:
- This is newly added in V5.As per Bjorn's comments on [1] removed the interrupts property as it is no longer used.

[1] https://lore.kernel.org/patchwork/patch/1434144/

Changes in V6:
- No changes.

 .../bindings/pinctrl/qcom,pmic-gpio.yaml           | 28 ++++------------------
 1 file changed, 4 insertions(+), 24 deletions(-)
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +4 -24
index 7a0d2d8..9bd01db 100644
@@ -56,18 +56,11 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    minItems: 1
-    maxItems: 44
-    description:
-      Must contain an array of encoded interrupt specifiers for
-      each available GPIO
+  interrupt-controller: true
 
   '#interrupt-cells':
     const: 2
 
-  interrupt-controller: true
-
   gpio-controller: true
 
   gpio-ranges:

@@ -87,6 +80,7 @@ required:
   - gpio-controller
   - '#gpio-cells'
   - gpio-ranges
+  - interrupt-controller
 
 patternProperties:
   '-state$':

@@ -223,22 +217,8 @@ examples:
     pm8921_gpio: gpio@150 {
       compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
       reg = <0x150 0x160>;
-      interrupts = <192 1>, <193 1>, <194 1>,
-                   <195 1>, <196 1>, <197 1>,
-                   <198 1>, <199 1>, <200 1>,
-                   <201 1>, <202 1>, <203 1>,
-                   <204 1>, <205 1>, <206 1>,
-                   <207 1>, <208 1>, <209 1>,
-                   <210 1>, <211 1>, <212 1>,
-                   <213 1>, <214 1>, <215 1>,
-                   <216 1>, <217 1>, <218 1>,
-                   <219 1>, <220 1>, <221 1>,
-                   <222 1>, <223 1>, <224 1>,
-                   <225 1>, <226 1>, <227 1>,
-                   <228 1>, <229 1>, <230 1>,
-                   <231 1>, <232 1>, <233 1>,
-                   <234 1>, <235 1>;
-
+      interrupt-controller;
+      #interrupt-cells = <2>;
       gpio-controller;
       gpio-ranges = <&pm8921_gpio 0 0 44>;
       #gpio-cells = <2>;
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation