ASoC: rt5682: enable SAR ADC power saving mode during suspend
Subsystems (3)
PATCH 1/1 ASoC: rt5682: enable SAR ADC power saving mode during suspend
From: Shuming Fan <[email protected]>
The SAR ADC power saving mode could reduce power consumption on MICVDD rail. Therefore, this patch saves power consumption during suspend state if the headset was connected.
--- sound/soc/codecs/rt5682.c | 44 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+)
sound/soc/codecs/rt5682.c +44 -0
@@ -2916,10 +2916,46 @@ static void rt5682_remove(struct snd_soc_component *component)static int rt5682_suspend (struct snd_soc_component *component) {struct rt5682_priv *rt5682 =snd_soc_component_get_drvdata (component); +unsigned int val;if (rt5682->is_sdw)return 0 ; +cancel_delayed_work_sync (&rt5682->jack_detect_work); +cancel_delayed_work_sync (&rt5682->jd_check_work); +if (rt5682->hs_jack && rt5682->jack_type ==SND_JACK_HEADSET ) { +snd_soc_component_update_bits (component,RT5682_CBJ_CTRL_1 , +RT5682_MB1_PATH_MASK |RT5682_MB2_PATH_MASK , +RT5682_CTRL_MB1_REG |RT5682_CTRL_MB2_REG ); + val =snd_soc_component_read (component, +RT5682_CBJ_CTRL_2 ) &RT5682_JACK_TYPE_MASK ; + +switch (val) { +case 0x1 : +snd_soc_component_update_bits (component,RT5682_SAR_IL_CMD_1 , +RT5682_SAR_SEL_MB1_MASK |RT5682_SAR_SEL_MB2_MASK , +RT5682_SAR_SEL_MB1_NOSEL |RT5682_SAR_SEL_MB2_SEL ); +break ; +case 0x2 : +snd_soc_component_update_bits (component,RT5682_SAR_IL_CMD_1 , +RT5682_SAR_SEL_MB1_MASK |RT5682_SAR_SEL_MB2_MASK , +RT5682_SAR_SEL_MB1_SEL |RT5682_SAR_SEL_MB2_NOSEL ); +break ; +default : +break ; + } + +snd_soc_component_update_bits (component,RT5682_PWR_ANLG_3 , +RT5682_PWR_CBJ ,0 ); + +/* enter SAR ADC power saving mode */ +snd_soc_component_update_bits (component,RT5682_SAR_IL_CMD_1 , +RT5682_SAR_BUTT_DET_MASK |RT5682_SAR_BUTDET_MODE_MASK |RT5682_SAR_BUTDET_RST_MASK ,0 ); +snd_soc_component_update_bits (component,RT5682_SAR_IL_CMD_1 , +RT5682_SAR_BUTT_DET_MASK |RT5682_SAR_BUTDET_MODE_MASK |RT5682_SAR_BUTDET_RST_MASK , +RT5682_SAR_BUTT_DET_EN |RT5682_SAR_BUTDET_POW_SAV |RT5682_SAR_BUTDET_RST_NORMAL ); + } +regcache_cache_only (rt5682->regmap, true);regcache_mark_dirty (rt5682->regmap);return 0 ;
@@ -2935,6 +2971,14 @@ static int rt5682_resume(struct snd_soc_component *component)regcache_cache_only (rt5682->regmap, false);regcache_sync (rt5682->regmap); +if (rt5682->hs_jack && rt5682->jack_type ==SND_JACK_HEADSET ) { +snd_soc_component_update_bits (component,RT5682_CBJ_CTRL_1 , +RT5682_MB1_PATH_MASK |RT5682_MB2_PATH_MASK , +RT5682_CTRL_MB1_FSM |RT5682_CTRL_MB2_FSM ); +snd_soc_component_update_bits (component,RT5682_PWR_ANLG_3 , +RT5682_PWR_CBJ ,RT5682_PWR_CBJ ); + } +mod_delayed_work (system_power_efficient_wq, &rt5682->jack_detect_work,msecs_to_jiffies (250 ));
Signature · 1 line
2.31.1
Mark Brown
maintainerQuoted 2 lines · On Tue, 27 Jul 2021 16:48:46 +0800, [email protected] wrote:
The SAR ADC power saving mode could reduce power consumption on MICVDD rail. Therefore, this patch saves power consumption during suspend state if the headset was connected.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: rt5682: enable SAR ADC power saving mode during suspend
commit: 89d751d8f9dcfb69d1153070d5e5a86d36ac1b45
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark