meta-ti: convert to new override syntax in honister
PATCH 1/1 meta-ti: convert to new override syntax in honister
From: Denys Dmytriyenko <[email protected]>
Upcoming "honister" release changes the override syntax to improve usability, speed and memory footprint. Update recipes with the new syntax and set layer compatibility to honister.
--- classes/ti-pdk-fetch.bbclass | 2 +- classes/ti-pdk.bbclass | 18 +-- conf/layer.conf | 2 +- conf/machine/am3517-evm.conf | 2 +- conf/machine/am37x-evm.conf | 2 +- conf/machine/am65xx-evm-k3r5-sr2.conf | 2 +- conf/machine/am65xx-hs-evm-k3r5-sr2.conf | 2 +- conf/machine/beagleboard.conf | 2 +- conf/machine/beaglebone.conf | 2 +- conf/machine/include/am64xx.inc | 2 +- conf/machine/include/am65xx.inc | 2 +- conf/machine/include/c66x.inc | 2 +- conf/machine/include/davinci.inc | 2 +- conf/machine/include/dra7xx.inc | 2 +- conf/machine/include/j7.inc | 2 +- conf/machine/include/k2e.inc | 2 +- conf/machine/include/k2g.inc | 2 +- conf/machine/include/k2hk.inc | 2 +- conf/machine/include/k2l.inc | 2 +- conf/machine/include/k3.inc | 2 +- conf/machine/include/k3r5.inc | 6 +- conf/machine/include/keystone.inc | 2 +- conf/machine/include/omap-a15.inc | 2 +- conf/machine/include/omap3.inc | 2 +- conf/machine/include/omap4.inc | 2 +- conf/machine/include/omapl1.inc | 2 +- conf/machine/include/omapl137.inc | 2 +- conf/machine/include/omapl138.inc | 2 +- conf/machine/include/ti33x.inc | 2 +- conf/machine/include/ti43x.inc | 2 +- conf/machine/omap3evm.conf | 2 +- conf/multiconfig/k3r5-sr2.conf | 2 +- conf/multiconfig/k3r5.conf | 2 +- recipes-bsp/abefw/abefw_1.0.14.bb | 2 +- recipes-bsp/aif2-lld/aif2-lld-rtos_git.bb | 2 +- recipes-bsp/aif2-lld/aif2-lld-test_git.bb | 2 +- recipes-bsp/aif2-lld/aif2-lld_git.bb | 2 +- recipes-bsp/alsa-state/alsa-state.bbappend | 2 +- recipes-bsp/audk2g-addon/audk2g-addon-rtos_git.bb | 2 +- recipes-bsp/bcp-lld/bcp-lld-rtos_git.bb | 2 +- recipes-bsp/board-rtos/board-rtos_git.bb | 20 ++-- recipes-bsp/boot-monitor/boot-monitor_git.bb | 2 +- recipes-bsp/bt-fw/bt-fw_git.bb | 2 +- recipes-bsp/cadence-mhdp-fw/cadence-mhdp-fw_git.bb | 2 +- recipes-bsp/cal-lld/cal-lld-rtos_git.bb | 6 +- recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb | 2 +- recipes-bsp/cmb-addon/cmb-addon-rtos_git.bb | 2 +- recipes-bsp/cmem/cmem-mod_git.bb | 4 +- recipes-bsp/cmem/cmem_git.bb | 4 +- .../common-csl-ip/common-csl-ip-rtos_git.bb | 10 +- recipes-bsp/common-csl-ip/common-csl-ip_git.bb | 2 +- .../common-csl-ip/csl-rti-dwwdtest-fw_git.bb | 16 +-- recipes-bsp/cppi-lld/cppi-lld-rtos_git.bb | 4 +- recipes-bsp/cppi-lld/cppi-lld-test_git.bb | 6 +- recipes-bsp/cppi-lld/cppi-lld_git.bb | 8 +- recipes-bsp/cpsw9g-eth-fw/cpsw9g-eth-fw_git.bb | 6 +- recipes-bsp/cuia/cuia_1.0.0.13.bb | 2 +- recipes-bsp/dfe-lld/dfe-lld-test_git.bb | 2 +- recipes-bsp/dfe-lld/dfe-lld_git.bb | 2 +- recipes-bsp/dspdce-fw/dspdce-fw_git.bb | 6 +- recipes-bsp/dsptop/debugss-module-drv_git.bb | 4 +- recipes-bsp/dsptop/dsptop_git.bb | 4 +- recipes-bsp/dsptop/libulm_git.bb | 4 +- recipes-bsp/dsptop/temperature-module-drv_git.bb | 4 +- recipes-bsp/edma3-lld/edma3-lld-rtos_git.bb | 10 +- recipes-bsp/edma3-lld/edma3-lld_git.bb | 6 +- recipes-bsp/emac-lld/emac-lld-rtos_git.bb | 12 +- recipes-bsp/fatfs-rtos/fatfs-rtos_git.bb | 2 +- .../faultmanagement/faultmanagement-rtos_git.bb | 4 +- recipes-bsp/fftc-lld/fftc-lld-rtos_git.bb | 2 +- recipes-bsp/formfactor/formfactor_0.0.bbappend | 2 +- recipes-bsp/fvid2/fvid2-rtos_git.bb | 6 +- .../gc320-drivers/ti-gc320-driver_5.0.11.p7.bb | 2 +- recipes-bsp/goodix-fw/goodix-fw_git.bb | 2 +- recipes-bsp/gpio-lld/gpio-lld-rtos_git.bb | 8 +- recipes-bsp/gpmc-lld/gpmc-lld-rtos_git.bb | 6 +- recipes-bsp/hplib/hplib-mod_git.bb | 2 +- recipes-bsp/hplib/hplib-test_git.bb | 2 +- recipes-bsp/hplib/hplib_git.bb | 4 +- recipes-bsp/hyplnk-lld/hyplnk-lld-rtos_git.bb | 2 +- recipes-bsp/hyplnk-lld/hyplnk-lld-test_git.bb | 6 +- recipes-bsp/hyplnk-lld/hyplnk-lld_git.bb | 6 +- recipes-bsp/i2c-lld/i2c-lld-rtos_git.bb | 14 +-- recipes-bsp/ibl-boot/ibl-boot-rtos_git.bb | 6 +- .../icss-emac-lld/icss-emac-lld-rtos_git.bb | 8 +- .../icss-emac-lld/icss-emac-lld-test_git.bb | 6 +- recipes-bsp/icss-emac-lld/icss-emac-lld_git.bb | 2 +- recipes-bsp/iolink-lld/iolink-lld-rtos_git.bb | 6 +- recipes-bsp/ipc-lld/ipc-lld-examples-rtos_git.bb | 24 ++-- recipes-bsp/ipc-lld/ipc-lld-fw_git.bb | 12 +- recipes-bsp/ipc-lld/ipc-lld-rtos_git.bb | 6 +- recipes-bsp/ipc-lld/ipc-lld.inc | 2 +- recipes-bsp/ipumm-fw/ipumm-fw_git.bb | 6 +- recipes-bsp/iqn2-lld/iqn2-lld-test_git.bb | 2 +- recipes-bsp/iqn2-lld/iqn2-lld_git.bb | 2 +- recipes-bsp/mad-utils/mad-utils-rtos_git.bb | 6 +- recipes-bsp/mcasp-lld/mcasp-lld-rtos_git.bb | 12 +- recipes-bsp/mcbsp-lld/mcbsp-lld-rtos_git.bb | 4 +- recipes-bsp/mmap-lld/mmap-lld-test_git.bb | 8 +- recipes-bsp/mmap-lld/mmap-lld_git.bb | 4 +- recipes-bsp/mmcsd-lld/mmcsd-lld-rtos_git.bb | 12 +- recipes-bsp/netcp-pa-fw/netcp-pa-fw_git.bb | 2 +- recipes-bsp/netcp-sa-fw/netcp-sa-fw_git.bb | 2 +- recipes-bsp/nwal-lld/nwal-lld-rtos_git.bb | 2 +- recipes-bsp/nwal-lld/nwal-lld-test_git.bb | 2 +- recipes-bsp/nwal-lld/nwal-lld_git.bb | 2 +- recipes-bsp/osal/osal-rtos_git.bb | 6 +- recipes-bsp/osal/osal-test_git.bb | 2 +- recipes-bsp/osal/osal_git.bb | 2 +- recipes-bsp/pa-lld/pa-lld-rtos_git.bb | 4 +- recipes-bsp/pa-lld/pa-lld-test_git.bb | 6 +- recipes-bsp/pa-lld/pa-lld_git.bb | 4 +- recipes-bsp/pcie-lld/pcie-lld-rtos_git.bb | 2 +- recipes-bsp/pktlib/pktlib-rtos_git.bb | 4 +- recipes-bsp/pktlib/pktlib_git.bb | 2 +- recipes-bsp/pm-lld/pm-lld-rtos_git.bb | 16 +-- .../ti-img-rogue-driver_1.13.5776728.bb | 2 +- .../powervr-drivers/ti-sgx-ddk-km_1.17.4948957.bb | 4 +- recipes-bsp/pru/pru-icss_git.bb | 38 +++---- recipes-bsp/pru/pru-pwm-fw_git.bb | 4 +- recipes-bsp/pru/pru-swuart-fw_git.bb | 6 +- recipes-bsp/pru/ti-pru-sw-edma-driver_1.00.00.bb | 6 +- recipes-bsp/prueth-fw/prueth-fw-am65x-sr2_git.bb | 4 +- recipes-bsp/prueth-fw/prueth-fw-am65x_git.bb | 4 +- recipes-bsp/prueth-fw/prueth-fw_5.6.15.bb | 4 +- recipes-bsp/pruhsr-fw/pruhsr-fw_2.17.25.bb | 4 +- recipes-bsp/pruprp-fw/pruprp-fw_2.17.25.bb | 4 +- recipes-bsp/pruss-lld/pruss-lld-apps_git.bb | 6 +- recipes-bsp/pruss-lld/pruss-lld-rtos_git.bb | 10 +- recipes-bsp/pruss-lld/pruss-lld-test_git.bb | 2 +- recipes-bsp/pruss-lld/pruss-lld_git.bb | 2 +- recipes-bsp/prusw-fw/prusw-fw_3.2.9.bb | 4 +- recipes-bsp/qmss-lld/qmss-lld-rtos_git.bb | 4 +- recipes-bsp/qmss-lld/qmss-lld-test_git.bb | 6 +- recipes-bsp/qmss-lld/qmss-lld_git.bb | 8 +- recipes-bsp/qmss-pdsp-fw/qmss-pdsp-fw_git.bb | 2 +- recipes-bsp/rm-lld/rm-lld-rtos_git.bb | 2 +- recipes-bsp/rm-lld/rm-lld_git.bb | 8 +- recipes-bsp/sa-lld/sa-lld-rtos_git.bb | 6 +- recipes-bsp/sa-lld/sa-lld-test_git.bb | 4 +- recipes-bsp/sa-lld/sa-lld_git.bb | 2 +- recipes-bsp/sciclient/sciclient-rtos_git.bb | 18 +-- recipes-bsp/serdes-diag/serdes-diag-rtos_git.bb | 2 +- recipes-bsp/serdes-fw/serdes-fw_git.bb | 2 +- recipes-bsp/spi-lld/spi-lld-rtos_git.bb | 12 +- recipes-bsp/srio-lld/srio-lld-rtos_git.bb | 4 +- recipes-bsp/srio-lld/srio-lld.inc | 2 +- recipes-bsp/starterware/starterware-rtos_git.bb | 4 +- recipes-bsp/starterware/starterware_git.bb | 2 +- recipes-bsp/tcp3d-lld/tcp3d-lld-rtos_git.bb | 4 +- .../ti-ocf-crypto-module_1.0.bb | 6 +- recipes-bsp/ti-sci-fw/ti-sci-fw-source_git.bb | 4 +- recipes-bsp/ti-sci-fw/ti-sci-fw_0.1.1.50.bb | 2 +- recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 14 +-- .../traceframework/traceframework-rtos_git.bb | 2 +- recipes-bsp/traceframework/traceframework_git.bb | 4 +- recipes-bsp/transport-rtos/bmet-eth-rtos_git.bb | 2 +- recipes-bsp/transport-rtos/nimu-icss-rtos_git.bb | 10 +- recipes-bsp/transport-rtos/nimu-rtos_git.bb | 28 ++--- recipes-bsp/transport-rtos/timesync-rtos_git.bb | 4 +- .../trusted-firmware-a_%.bbappend | 4 +- recipes-bsp/u-boot/u-boot-ti.inc | 26 ++--- recipes-bsp/uart-lld/uart-lld-rtos_git.bb | 14 +-- recipes-bsp/udma-lld/udma-lld-rtos_git.bb | 6 +- .../uio-module-drv/uio-module-drv-test_git.bb | 12 +- recipes-bsp/uio-module-drv/uio-module-drv_git.bb | 6 +- recipes-bsp/usb-lld/usb-lld-rtos_git.bb | 8 +- recipes-bsp/vis-fw/vis_01.50.07.15.bb | 8 +- recipes-bsp/vpdma-fw/vpdma-fw_03-2012.bb | 2 +- recipes-bsp/vps-lld/vps-lld-rtos_git.bb | 6 +- recipes-bsp/wl18xx-fw/wl18xx-fw_8.9.0.0.86.bb | 2 +- recipes-bsp/x-load/x-load.inc | 2 +- recipes-bsp/x-load/x-load_1.46-psp.bb | 4 +- recipes-bsp/x-load/x-load_git.bb | 2 +- .../wl18xx-calibrator/wl18xx-calibrator_8.7.3.bb | 2 +- .../wl18xx-target-scripts_8.7.3.bb | 2 +- recipes-connectivity/wlconf/wlconf_8.7.3.bb | 4 +- .../init-ifupdown/init-ifupdown_1.0.bbappend | 2 +- recipes-core/udev/eudev_%.bbappend | 8 +- recipes-devtools/gdbc6x/gdbc6x_git.bb | 4 +- recipes-devtools/gdbc6x/gdbserver-c6x_git.bb | 4 +- .../gdbc6x/gdbserverproxy-module-drv_git.bb | 4 +- recipes-graphics/libgal/ti-gc320-libs_5.0.11.p7.bb | 4 +- .../libgles/ti-img-rogue-umlibs_1.13.5776728.bb | 38 +++---- .../libgles/ti-sgx-ddk-um_1.17.4948957.bb | 36 +++--- recipes-kernel/kselftests/kselftests_4.10.bb | 122 ++++++++++----------- recipes-kernel/linux/bundle-devicetree.inc | 2 +- recipes-kernel/linux/kernel-rdepends.inc | 40 +++---- recipes-kernel/linux/linux-ti-mainline_git.bb | 12 +- recipes-kernel/linux/linux-ti-staging-rt_5.10.bb | 2 +- recipes-kernel/linux/linux-ti-staging-rt_5.4.bb | 2 +- .../linux/linux-ti-staging-systest_5.10.bb | 2 +- .../linux/linux-ti-staging-systest_5.4.bb | 2 +- recipes-kernel/linux/linux-ti-staging_5.10.bb | 8 +- recipes-kernel/linux/linux-ti-staging_5.4.bb | 8 +- recipes-kernel/linux/ti-uio.inc | 32 +++--- recipes-security/optee/optee-os_%.bbappend | 22 ++-- recipes-ti/beagleboard/beaglebone-capes.bb | 2 +- .../beagleboard/beaglebone-getting-started.bb | 4 +- recipes-ti/beagleboard/gadget-init.bb | 10 +- recipes-ti/bios/ti-biosutils_1.02.02.bb | 2 +- recipes-ti/bios/ti-sysbios.inc | 6 +- .../codec-engine/ti-codec-engine_3.24.00.08.bb | 4 +- recipes-ti/ctoolslib/libaet_git.bb | 4 +- .../devtools/gcc-arm-baremetal_7-2018-q2-update.bb | 6 +- .../gcc-linaro-baremetal-aarch64-native.bb | 8 +- recipes-ti/devtools/gcc-linaro-baremetal-native.bb | 8 +- recipes-ti/devtools/ti-cg-xml_2.61.00.bb | 4 +- recipes-ti/devtools/ti-cgt-arm_18.12.5.bb | 8 +- recipes-ti/devtools/ti-cgt-pru_2.3.2.bb | 16 +-- recipes-ti/devtools/ti-cgt470.inc | 2 +- recipes-ti/devtools/ti-cgt6x-7_7.4.16.bb | 6 +- recipes-ti/devtools/ti-cgt6x_8.3.2.bb | 22 ++-- recipes-ti/devtools/ti-cgt7x_1.2.0.bb | 8 +- recipes-ti/devtools/ti-xdctools-common.inc | 8 +- recipes-ti/dmai/ti-dmai.inc | 38 +++---- recipes-ti/dmai/ti-dmai_svn.bb | 6 +- recipes-ti/dsplib/dsplib.inc | 8 +- .../ti-framework-components.inc | 6 +- recipes-ti/imglib/imglib-c66x.inc | 8 +- recipes-ti/includes/ti-staging.inc | 4 +- recipes-ti/includes/ti-unpack.inc | 4 +- recipes-ti/ipc/ipc-transport-common-rtos_git.bb | 2 +- recipes-ti/ipc/ipc-transport-qmss-rtos_git.bb | 4 +- recipes-ti/ipc/ipc-transport-qmss.inc | 2 +- recipes-ti/ipc/ipc-transport-srio-rtos_git.bb | 4 +- recipes-ti/ipc/ipc-transport-srio.inc | 2 +- recipes-ti/ipc/ti-ipc-examples-linux_git.bb | 6 +- recipes-ti/ipc/ti-ipc-examples.inc | 4 +- recipes-ti/ipc/ti-ipc-examples_git.bb | 6 +- recipes-ti/ipc/ti-ipc-rtos.inc | 8 +- recipes-ti/ipc/ti-ipc-rtos_git.bb | 22 ++-- recipes-ti/ipc/ti-ipc_git.bb | 10 +- recipes-ti/linuxutils/ti-linuxutils.inc | 14 +-- recipes-ti/linuxutils/ti-linuxutils_2.26.01.02.bb | 2 +- recipes-ti/mathlib/mathlib.inc | 8 +- recipes-ti/mpm-transport/mpm-transport_git.bb | 12 +- recipes-ti/multiprocmgr/multiprocmgr-rtos_git.bb | 12 +- recipes-ti/multiprocmgr/multiprocmgr-test_git.bb | 10 +- recipes-ti/multiprocmgr/multiprocmgr_git.bb | 4 +- recipes-ti/ndk/ti-ndk.inc | 6 +- recipes-ti/ns/ti-ns.inc | 6 +- recipes-ti/openmp-rtos/openmp-rtos_git.bb | 12 +- recipes-ti/osal/ti-osal.inc | 6 +- recipes-ti/swtools/swtools_git.bb | 8 +- recipes-ti/ti-pdk-build/ti-pdk-build-rtos_git.bb | 4 +- recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 18 +-- recipes-ti/udma/udma_git.bb | 4 +- recipes-ti/uio-test-pruss/uio-test-pruss_git.bb | 8 +- recipes-ti/vlib/vlib-c66x.inc | 6 +- recipes-ti/xdais/ti-xdais.inc | 6 +- recipes-ti/xdais/ti-xdais_6.26.01.03.bb | 2 +- 252 files changed, 832 insertions(+), 832 deletions(-)
classes/ti-pdk-fetch.bbclass +1 -1
@@ -18,7 +18,7 @@ TI_PDK_SOURCE = "${TI_PDK_SOURCE_WORKDIR}/git" S = "${@'${WORKDIR}/git/${TI_PDK_COMP_PATH}'.rstrip('/')}" # Hard-link only required sources from PDK -python do_unpack_append() { +python do_unpack:append() { if len(d.getVar('TI_PDK_COMP') or '') > 0: import shutil
classes/ti-pdk.bbclass +9 -9
@@ -5,14 +5,14 @@ inherit perlnative DEPENDS = "ti-xdctools-native ti-cg-xml-native ti-sysbios common-csl-ip-rtos libxml-simple-perl-native gcc-arm-baremetal-native ti-cgt6x-native ti-cgt-pru-native ti-pdk-build-rtos doxygen-native" -DEPENDS_append_omap-a15 = " ti-cgt-arm-native" -DEPENDS_remove_ti33x = "ti-cgt6x-native" -DEPENDS_remove_ti43x = "ti-cgt6x-native" -DEPENDS_append_omapl1 = " ti-cgt-arm-native" -DEPENDS_remove_am65xx = "gcc-arm-baremetal-native ti-cgt6x-native" -DEPENDS_append_am65xx = " ti-cgt-arm-native gcc-linaro-baremetal-aarch64-native" -DEPENDS_remove_j7 = "gcc-arm-baremetal-native" -DEPENDS_append_j7 = " ti-cgt-arm-native gcc-linaro-baremetal-aarch64-native ti-cgt7x-native" +DEPENDS:append_omap-a15 = " ti-cgt-arm-native" +DEPENDS:remove_ti33x = "ti-cgt6x-native" +DEPENDS:remove_ti43x = "ti-cgt6x-native" +DEPENDS:append_omapl1 = " ti-cgt-arm-native" +DEPENDS:remove_am65xx = "gcc-arm-baremetal-native ti-cgt6x-native" +DEPENDS:append_am65xx = " ti-cgt-arm-native gcc-linaro-baremetal-aarch64-native" +DEPENDS:remove_j7 = "gcc-arm-baremetal-native" +DEPENDS:append_j7 = " ti-cgt-arm-native gcc-linaro-baremetal-aarch64-native ti-cgt7x-native" S = "${WORKDIR}/git" B = "${WORKDIR}/build"
@@ -141,4 +141,4 @@ do_install () { fi } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages"
conf/layer.conf +1 -1
@@ -8,7 +8,7 @@ BBFILE_COLLECTIONS += "meta-ti" BBFILE_PATTERN_meta-ti := "^${LAYERDIR}/" BBFILE_PRIORITY_meta-ti = "6" -LAYERSERIES_COMPAT_meta-ti = "dunfell gatesgarth hardknott" +LAYERSERIES_COMPAT_meta-ti = "honister" LICENSE_PATH += "${LAYERDIR}/licenses"
conf/machine/am3517-evm.conf +1 -1
@@ -8,7 +8,7 @@ MACHINE_GUI_CLASS = "smallscreen" MACHINE_FEATURES += "touchscreen ethernet" IMAGE_FSTYPES += "ubi tar.xz" -EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048" +EXTRA_IMAGECMD:jffs2 = "-lnp -e 0x20000 -s 2048" SERIAL_CONSOLES = "115200;ttyS2" USE_VT = "2"
conf/machine/am37x-evm.conf +1 -1
@@ -8,7 +8,7 @@ MACHINE_GUI_CLASS = "smallscreen" MACHINE_FEATURES += "touchscreen ethernet" IMAGE_FSTYPES += "ubi tar.xz" -EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048" +EXTRA_IMAGECMD:jffs2 = "-lnp -e 0x20000 -s 2048" KERNEL_DEVICETREE = "omap3-evm-37xx.dtb"
conf/machine/am65xx-evm-k3r5-sr2.conf +1 -1
@@ -5,7 +5,7 @@ # Booting SR2 requires different SYSFW, the rest is handled at runtime require conf/machine/am65xx-evm-k3r5.conf -SOC_FAMILY_append = ":k3r5-sr2" +SOC_FAMILY:append = ":k3r5-sr2" SYSFW_SOC = "am65x_sr2" SYSFW_SYMLINK = "sysfw.itb"
conf/machine/am65xx-hs-evm-k3r5-sr2.conf +1 -1
@@ -5,7 +5,7 @@ # Booting SR2 requires different SYSFW, the rest is handled at runtime require conf/machine/am65xx-hs-evm-k3r5.conf -SOC_FAMILY_append = ":k3r5-sr2" +SOC_FAMILY:append = ":k3r5-sr2" SYSFW_SOC = "am65x_sr2" SYSFW_SYMLINK = "sysfw.itb"
conf/machine/beagleboard.conf +1 -1
@@ -8,7 +8,7 @@ require conf/machine/include/omap3.inc MACHINE_GUI_CLASS = "bigscreen" IMAGE_FSTYPES += "tar.xz ubi" -EXTRA_IMAGECMD_jffs2 = "-lnp" +EXTRA_IMAGECMD:jffs2 = "-lnp" KERNEL_DEVICETREE = "omap3-beagle.dtb omap3-beagle-xm.dtb omap3-beagle-xm-ab.dtb"
conf/machine/beaglebone.conf +1 -1
@@ -13,7 +13,7 @@ MACHINE_GUI_CLASS = "bigscreen" SERIAL_CONSOLES = "115200;ttyS0" -IMAGE_INSTALL_append = " kernel-devicetree kernel-image-zimage" +IMAGE_INSTALL:append = " kernel-devicetree kernel-image-zimage" # Refine the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_BOARDS = "bbbAM335x"
conf/machine/include/am64xx.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/k3.inc -SOC_FAMILY_append = ":am64xx" +SOC_FAMILY:append = ":am64xx" MACHINE_FEATURES += "screen touchscreen"
conf/machine/include/am65xx.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/k3.inc -SOC_FAMILY_append = ":am65xx" +SOC_FAMILY:append = ":am65xx" MACHINE_FEATURES += "screen touchscreen gpu"
conf/machine/include/c66x.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/keystone.inc -SOC_FAMILY_append = ":c66x" +SOC_FAMILY:append = ":c66x" # HACK: The c66x family is composed of devices with only DSP cores, and no ARM # cores. The Linux kernel is not supported on these machines.
conf/machine/include/davinci.inc +1 -1
@@ -17,6 +17,6 @@ UBOOT_LOADADDRESS = "0x80008000" EXTRA_IMAGEDEPENDS += "u-boot" SERIAL_CONSOLES ?= "115200;ttyS0" -EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" +EXTRA_IMAGECMD:jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" MACHINE_FEATURES = "kernel26 serial ethernet usbhost usbgadget mmc alsa"
conf/machine/include/dra7xx.inc +1 -1
@@ -1,4 +1,4 @@ require conf/machine/include/omap-a15.inc -SOC_FAMILY_append = ":dra7xx" +SOC_FAMILY:append = ":dra7xx" MACHINE_FEATURES += "pci"
conf/machine/include/j7.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/k3.inc -SOC_FAMILY_append = ":j7" +SOC_FAMILY:append = ":j7" OPTEEMACHINE = "k3-j721e" OPTEEOUTPUTMACHINE = "k3"
conf/machine/include/k2e.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/keystone.inc -SOC_FAMILY_append = ":k2e" +SOC_FAMILY:append = ":k2e" # Set the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_SOCS = "k2e"
conf/machine/include/k2g.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/keystone.inc -SOC_FAMILY_append = ":k2g" +SOC_FAMILY:append = ":k2g" # Set the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_SOCS = "k2g"
conf/machine/include/k2hk.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/keystone.inc -SOC_FAMILY_append = ":k2hk" +SOC_FAMILY:append = ":k2hk" # Set the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_SOCS = "k2h k2k"
conf/machine/include/k2l.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/keystone.inc -SOC_FAMILY_append = ":k2l" +SOC_FAMILY:append = ":k2l" # Set the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_SOCS = "k2l"
conf/machine/include/k3.inc +1 -1
@@ -1,7 +1,7 @@ # TI K3 Aarch64 profile for Cortex-A53/A72 cores require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":k3" +SOC_FAMILY:append = ":k3" require conf/machine/include/arm/arch-arm64.inc
conf/machine/include/k3r5.inc +3 -3
@@ -1,7 +1,7 @@ # TI K3 Armv7 profile for Cortex-R5F cores require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":k3r5" +SOC_FAMILY:append = ":k3r5" # The closest of existing tunes for Cortex-R5F DEFAULTTUNE = "armv7athf"
@@ -20,5 +20,5 @@ UBOOT_BINARY = "tiboot3.${UBOOT_SUFFIX}" UBOOT_IMAGE = "tiboot3-${MAINMACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}" UBOOT_SYMLINK = "tiboot3-${MAINMACHINE}.${UBOOT_SUFFIX}" -PACKAGECONFIG_pn-u-boot-ti-staging = "" -PACKAGECONFIG_pn-u-boot-ti-mainline = "" +PACKAGECONFIG:pn-u-boot-ti-staging = "" +PACKAGECONFIG:pn-u-boot-ti-mainline = ""
conf/machine/include/keystone.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":keystone" +SOC_FAMILY:append = ":keystone" DEFAULTTUNE ?= "armv7athf-neon" require conf/machine/include/tune-cortexa15.inc
conf/machine/include/omap-a15.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":omap-a15" +SOC_FAMILY:append = ":omap-a15" DEFAULTTUNE ?= "armv7athf-neon" require conf/machine/include/tune-cortexa15.inc
conf/machine/include/omap3.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":omap3" +SOC_FAMILY:append = ":omap3" DEFAULTTUNE ?= "armv7athf-neon" require conf/machine/include/tune-cortexa8.inc
conf/machine/include/omap4.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":omap4" +SOC_FAMILY:append = ":omap4" DEFAULTTUNE ?= "armv7athf-neon" require conf/machine/include/tune-cortexa9.inc
conf/machine/include/omapl1.inc +1 -1
@@ -1,2 +1,2 @@ require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":omapl1" +SOC_FAMILY:append = ":omapl1"
conf/machine/include/omapl137.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/omapl1.inc -SOC_FAMILY_append = ":omapl137" +SOC_FAMILY:append = ":omapl137" # Set the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_SOCS = "omapl137"
conf/machine/include/omapl138.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/omapl1.inc -SOC_FAMILY_append = ":omapl138" +SOC_FAMILY:append = ":omapl138" # Set the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_SOCS = "omapl138"
conf/machine/include/ti33x.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":ti33x" +SOC_FAMILY:append = ":ti33x" DEFAULTTUNE ?= "armv7athf-neon" require conf/machine/include/tune-cortexa8.inc
conf/machine/include/ti43x.inc +1 -1
@@ -1,5 +1,5 @@ require conf/machine/include/ti-soc.inc -SOC_FAMILY_append = ":ti43x" +SOC_FAMILY:append = ":ti43x" DEFAULTTUNE ?= "armv7athf-neon" require conf/machine/include/tune-cortexa9.inc
conf/machine/omap3evm.conf +1 -1
@@ -8,7 +8,7 @@ MACHINE_GUI_CLASS = "smallscreen" MACHINE_FEATURES += "touchscreen ethernet" IMAGE_FSTYPES += "jffs2 tar.xz" -EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048" +EXTRA_IMAGECMD:jffs2 = "-lnp -e 0x20000 -s 2048" SERIAL_CONSOLES = "115200;ttyS0" USE_VT = "0"
conf/multiconfig/k3r5-sr2.conf +1 -1
@@ -1,3 +1,3 @@ require k3r5.conf -MACHINE_append = "-sr2" +MACHINE:append = "-sr2"
conf/multiconfig/k3r5.conf +1 -1
@@ -2,4 +2,4 @@ MAINMACHINE := "${MACHINE}" DEPLOY_DIR_IMAGE = "${DEPLOY_DIR}/images/${MAINMACHINE}" -MACHINE_append = "-k3r5" +MACHINE:append = "-k3r5"
recipes-bsp/abefw/abefw_1.0.14.bb +1 -1
@@ -20,4 +20,4 @@ do_install() { cp ${S}/firmware/omap4_abe_new ${D}/lib/firmware/ } -FILES_${PN} += "/lib/firmware/omap4_abe_new" +FILES:${PN} += "/lib/firmware/omap4_abe_new"
recipes-bsp/aif2-lld/aif2-lld-rtos_git.bb +1 -1
@@ -6,7 +6,7 @@ require recipes-bsp/aif2-lld/aif2-lld.inc PR = "${INC_PR}.0" -DEPENDS_append = " qmss-lld-rtos \ +DEPENDS:append = " qmss-lld-rtos \ cppi-lld-rtos \ "
recipes-bsp/aif2-lld/aif2-lld-test_git.bb +1 -1
@@ -6,7 +6,7 @@ include aif2-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} AIF2_SRC_DIR=${WORKDIR}/git" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} AIF2_SRC_DIR=${WORKDIR}/git" do_compile () { oe_runmake clean DEVICE=k2hk
recipes-bsp/aif2-lld/aif2-lld_git.bb +1 -1
@@ -6,7 +6,7 @@ include aif2-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_compile () { oe_runmake lib DEVICE=k2hk
recipes-bsp/alsa-state/alsa-state.bbappend +1 -1
@@ -1 +1 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
recipes-bsp/audk2g-addon/audk2g-addon-rtos_git.bb +1 -1
@@ -25,7 +25,7 @@ PR = "r0" S = "${WORKDIR}/git/ti/addon/audk2g" -DEPENDS_append = " ti-sysbios \ +DEPENDS:append = " ti-sysbios \ gpio-lld-rtos \ i2c-lld-rtos \ board-rtos \
recipes-bsp/bcp-lld/bcp-lld-rtos_git.bb +1 -1
@@ -15,7 +15,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " qmss-lld-rtos \ +DEPENDS:append = " qmss-lld-rtos \ cppi-lld-rtos \ "
recipes-bsp/board-rtos/board-rtos_git.bb +10 -10
@@ -16,24 +16,24 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " i2c-lld-rtos \ +DEPENDS:append = " i2c-lld-rtos \ spi-lld-rtos \ uart-lld-rtos \ osal-rtos \ " -DEPENDS_append_omap-a15 = " ti-ndk \ +DEPENDS:append_omap-a15 = " ti-ndk \ mmcsd-lld-rtos \ pm-lld-rtos \ " -DEPENDS_append_am57xx-evm = " gpio-lld-rtos \ +DEPENDS:append_am57xx-evm = " gpio-lld-rtos \ icss-emac-lld-rtos \ pruss-lld-rtos \ " -DEPENDS_append_ti33x = " gpio-lld-rtos \ +DEPENDS:append_ti33x = " gpio-lld-rtos \ gpmc-lld-rtos \ icss-emac-lld-rtos \ mmcsd-lld-rtos \
@@ -42,7 +42,7 @@ DEPENDS_append_ti33x = " gpio-lld-rtos \ ti-ndk \ " -DEPENDS_append_ti43x = " gpio-lld-rtos \ +DEPENDS:append_ti43x = " gpio-lld-rtos \ gpmc-lld-rtos \ icss-emac-lld-rtos \ mmcsd-lld-rtos \
@@ -51,13 +51,13 @@ DEPENDS_append_ti43x = " gpio-lld-rtos \ ti-ndk \ " -DEPENDS_append_dra7xx = " pm-lld-rtos \ +DEPENDS:append_dra7xx = " pm-lld-rtos \ mmcsd-lld-rtos \ " -DEPENDS_append_am65xx = " sciclient-rtos \ +DEPENDS:append_am65xx = " sciclient-rtos \ " -DEPENDS_append_j7 = " udma-lld-rtos \ +DEPENDS:append_j7 = " udma-lld-rtos \ sciclient-rtos \ mmcsd-lld-rtos \ "
@@ -71,6 +71,6 @@ INHIBIT_PACKAGE_STRIP = "1" export PDK_BOARD_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" -XDCPATH_append = ";${PDK_INSTALL_DIR}/packages/ti/csl;${NDK_INSTALL_DIR}/packages" +XDCPATH:append = ";${PDK_INSTALL_DIR}/packages/ti/csl;${NDK_INSTALL_DIR}/packages" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/boot-monitor/boot-monitor_git.bb +1 -1
@@ -23,7 +23,7 @@ FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}" LD="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}"" -FILES_${PN} = "/boot" +FILES:${PN} = "/boot" inherit deploy
recipes-bsp/bt-fw/bt-fw_git.bb +1 -1
@@ -21,4 +21,4 @@ do_install() { oe_runmake "DEST_DIR=${D}" "BASE_LIB_DIR=${base_libdir}" install } -FILES_${PN} += "${base_libdir}/firmware/ti-connectivity/*" +FILES:${PN} += "${base_libdir}/firmware/ti-connectivity/*"
recipes-bsp/cadence-mhdp-fw/cadence-mhdp-fw_git.bb +1 -1
@@ -25,4 +25,4 @@ do_install() { install -m 0644 ${S}/cadence/${TARGET} ${D}${base_libdir}/firmware/cadence/${TARGET} } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware"
recipes-bsp/cal-lld/cal-lld-rtos_git.bb +3 -3
@@ -15,7 +15,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ fvid2-rtos \ "
@@ -71,6 +71,6 @@ do_install() { find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/cal \; } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" -INSANE_SKIP_${PN} = "arch ldflags" +INSANE_SKIP:${PN} = "arch ldflags"
recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb +1 -1
@@ -23,7 +23,7 @@ do_install() { install -m 0644 bin/*-scale-data.bin ${D}${base_libdir}/firmware/ } -FILES_${PN} += "${base_libdir}/firmware" +FILES:${PN} += "${base_libdir}/firmware" COMPATIBLE_MACHINE = "(ti-soc)" TOOLCHAIN = "gcc"
recipes-bsp/cmb-addon/cmb-addon-rtos_git.bb +1 -1
@@ -27,7 +27,7 @@ SRC_URI = "${CMB_ADDON_GIT_URI};destsuffix=${CMB_ADDON_GIT_DESTSUFFIX};protocol= S = "${WORKDIR}/git/ti/addon/cmb" -DEPENDS_append = " ti-sysbios \ +DEPENDS:append = " ti-sysbios \ gpio-lld-rtos \ i2c-lld-rtos \ mcasp-lld-rtos \
recipes-bsp/cmem/cmem-mod_git.bb +2 -2
@@ -3,7 +3,7 @@ DESCRIPTION = "Kernel module for contiguous memory allocation from userspace" include cmem.inc # This package builds a kernel module, use kernel PR as base and append a local -MACHINE_KERNEL_PR_append = "a" +MACHINE_KERNEL_PR:append = "a" PR = "${MACHINE_KERNEL_PR}" inherit module
@@ -13,6 +13,6 @@ MAKE_TARGETS = "module" KERNEL_MODULE_AUTOLOAD += "cmemk" -do_install_prepend() { +do_install:prepend() { cp ${B}/src/cmem/module/Module.symvers ${B}/ || true }
recipes-bsp/cmem/cmem_git.bb +2 -2
@@ -2,12 +2,12 @@ DESCRIPTION = "The cmem component supports contiguous memory allocation from use include cmem.inc -RDEPENDS_${PN} = "cmem-mod" +RDEPENDS:${PN} = "cmem-mod" PR = "r0" PACKAGES =+ "${PN}-test" -FILES_${PN}-test = "${bindir}/*" +FILES:${PN}-test = "${bindir}/*" inherit autotools
recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb +5 -5
@@ -2,12 +2,12 @@ require common-csl-ip.inc PR = "${INC_PR}.6" PACKAGE_ARCH = "${MACHINE_ARCH}" -COMPATIBLE_MACHINE_append = "|c66x|k3" +COMPATIBLE_MACHINE:append = "|c66x|k3" inherit ti-pdk -DEPENDS_remove = "${PN}" -DEPENDS_remove = "ti-sysbios" +DEPENDS:remove = "${PN}" +DEPENDS:remove = "ti-sysbios" # Build with make instead of XDC TI_PDK_XDCMAKE = "0"
@@ -19,5 +19,5 @@ export DEST_ROOT="${S}" PDK_COMP_LINK_TEXT = "CSL-Chip Support Library" # Workaround: dra7xx build requires am57xx CSL libraries for opencl-monitor -TI_PDK_LIMIT_SOCS_append_dra7xx = " am571x am572x am574x" -TI_PDK_LIMIT_BOARDS_append_dra7xx = " evmAM571x evmAM572x idkAM574x" +TI_PDK_LIMIT_SOCS:append_dra7xx = " am571x am572x am574x" +TI_PDK_LIMIT_BOARDS:append_dra7xx = " evmAM571x evmAM572x idkAM574x"
recipes-bsp/common-csl-ip/common-csl-ip_git.bb +1 -1
@@ -2,7 +2,7 @@ require common-csl-ip.inc PR = "${INC_PR}.0" -ALLOW_EMPTY_${PN} = "1" +ALLOW_EMPTY:${PN} = "1" CLEANBROKEN = "1"
recipes-bsp/common-csl-ip/csl-rti-dwwdtest-fw_git.bb +8 -8
@@ -47,15 +47,15 @@ do_install() { # Create separate package for each firmware so we can utilize # update-alternatives. PACKAGES =+ "${PN}-evm ${PN}-idk" -RDEPENDS_${PN} = "${PN}-evm ${PN}-idk" -ALLOW_EMPTY_${PN} = "1" +RDEPENDS:${PN} = "${PN}-evm ${PN}-idk" +ALLOW_EMPTY:${PN} = "1" -FILES_${PN}-evm = "${base_libdir}/firmware/rti_dwwdtest/am65xx_evm" -FILES_${PN}-idk = "${base_libdir}/firmware/rti_dwwdtest/am65xx_idk" +FILES:${PN}-evm = "${base_libdir}/firmware/rti_dwwdtest/am65xx_evm" +FILES:${PN}-idk = "${base_libdir}/firmware/rti_dwwdtest/am65xx_idk" # We are packaging R5 firmware -INSANE_SKIP_${PN}-evm = "arch" -INSANE_SKIP_${PN}-idk = "arch" +INSANE_SKIP:${PN}-evm = "arch" +INSANE_SKIP:${PN}-idk = "arch" # Configure update-alternatives as there may be other firmwares provided in an # image.
@@ -63,8 +63,8 @@ inherit update-alternatives # It might be nice to dynamically declare the following based on # TI_PDK_LIMIT_BOARDS, but that is probably overkill. -ALTERNATIVE_${PN}-evm = "am65x-mcu-r5f0_0-fw" -ALTERNATIVE_${PN}-idk = "am65x-mcu-r5f0_0-fw" +ALTERNATIVE:${PN}-evm = "am65x-mcu-r5f0_0-fw" +ALTERNATIVE:${PN}-idk = "am65x-mcu-r5f0_0-fw" ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/am65x-mcu-r5f0_0-fw"
recipes-bsp/cppi-lld/cppi-lld-rtos_git.bb +2 -2
@@ -3,8 +3,8 @@ require cppi-lld.inc PR = "${INC_PR}.1" -COMPATIBLE_MACHINE_append = "|c66x" +COMPATIBLE_MACHINE:append = "|c66x" -DEPENDS_append = " rm-lld-rtos \ +DEPENDS:append = " rm-lld-rtos \ qmss-lld-rtos \ "
recipes-bsp/cppi-lld/cppi-lld-test_git.bb +3 -3
@@ -13,10 +13,10 @@ do_compile () { # Now build the lld in the updated directory for device in ${DEVICELIST} do - make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} + make -f makefile:armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} for choice in ${CHOICELIST} do - make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" + make -f makefile:armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" done done }
@@ -24,6 +24,6 @@ do_compile () { do_install () { for device in ${DEVICELIST} do - make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir} + make -f makefile:armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir} done }
recipes-bsp/cppi-lld/cppi-lld_git.bb +4 -4
@@ -8,15 +8,15 @@ PR = "${INC_PR}.1" do_compile () { # Now build the lld in the updated directory - make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} + make -f makefile:armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} for device in ${DEVICELIST} do - make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="${device}" + make -f makefile:armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="${device}" done } do_install () { - make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} + make -f makefile:armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} chown -R root:root ${D} # Set the generic device library symbolic link to default k2h
@@ -35,4 +35,4 @@ INHIBIT_PACKAGE_STRIP_FILES_k2hk = "${PKGD}${libdir}/libcppi_k2h.a ${PKGD}${libd INHIBIT_PACKAGE_STRIP_FILES_k2e = "${PKGD}${libdir}/libcppi_k2e.a" INHIBIT_PACKAGE_STRIP_FILES_k2l = "${PKGD}${libdir}/libcppi_k2l.a" INHIBIT_PACKAGE_STRIP_FILES_k2g = "${PKGD}${libdir}/libcppi_k2h.a" -INHIBIT_PACKAGE_STRIP_FILES_append = " ${PKGD}${libdir}/libcppi.a" +INHIBIT_PACKAGE_STRIP_FILES:append = " ${PKGD}${libdir}/libcppi.a"
recipes-bsp/cpsw9g-eth-fw/cpsw9g-eth-fw_git.bb +3 -3
@@ -21,7 +21,7 @@ CPSW9G_FW_DIR = "${S}/ethfw" CPSW9G_FW_FILENAME = "app_remoteswitchcfg_server_pdk_mem_map_strip.xer5f" # make sure that lib/firmware, and all its contents are part of the package -FILES_${PN} += "${base_libdir}/firmware" +FILES:${PN} += "${base_libdir}/firmware" do_install() { install -d ${D}${base_libdir}/firmware
@@ -30,14 +30,14 @@ do_install() { } TARGET_MAIN_R5FSS0_0 = "j7-main-r5f0_0-fw" -ALTERNATIVE_${PN} = "j7-main-r5f0_0-fw" +ALTERNATIVE:${PN} = "j7-main-r5f0_0-fw" ALTERNATIVE_LINK_NAME[j7-main-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}" ALTERNATIVE_TARGET[j7-main-r5f0_0-fw] = "${base_libdir}/firmware/${CPSW9G_FW_FILENAME}" ALTERNATIVE_PRIORITY = "17" INHIBIT_PACKAGE_STRIP = "1" INHIBIT_PACKAGE_DEBUG_SPLIT = "1" -INSANE_SKIP_${PN} += "arch" +INSANE_SKIP:${PN} += "arch" do_compile[noexec] = "1" do_configure[noexec] = "1"
recipes-bsp/cuia/cuia_1.0.0.13.bb +1 -1
@@ -27,4 +27,4 @@ do_install() { COMPATIBLE_HOST ?= "null" COMPATIBLE_HOST_ti-soc = "(.*)" -INSANE_SKIP_${PN} += "textrel installed-vs-shipped" +INSANE_SKIP:${PN} += "textrel installed-vs-shipped"
recipes-bsp/dfe-lld/dfe-lld-test_git.bb +1 -1
@@ -6,7 +6,7 @@ include dfe-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} DFE_SRC_DIR=${S}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} DFE_SRC_DIR=${S}" do_compile () { # Now build the lld in the updated directory
recipes-bsp/dfe-lld/dfe-lld_git.bb +1 -1
@@ -6,7 +6,7 @@ include dfe-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_compile () { oe_runmake lib DEVICE=k2l
recipes-bsp/dspdce-fw/dspdce-fw_git.bb +3 -3
@@ -55,11 +55,11 @@ do_install() { install -m 0644 ${S}/dra7xx-c66x-dsp.xe66 ${D}${base_libdir}/firmware/${TARGET}.${BPN} } -ALTERNATIVE_${PN} = "dra7-dsp1-fw.xe66" +ALTERNATIVE:${PN} = "dra7-dsp1-fw.xe66" ALTERNATIVE_LINK_NAME[dra7-dsp1-fw.xe66] = "${base_libdir}/firmware/${TARGET}" ALTERNATIVE_TARGET[dra7-dsp1-fw.xe66] = "${base_libdir}/firmware/${TARGET}.${BPN}" ALTERNATIVE_PRIORITY = "10" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch" -FILES_${PN} += "${base_libdir}/firmware/*" +FILES:${PN} += "${base_libdir}/firmware/*"
recipes-bsp/dsptop/debugss-module-drv_git.bb +2 -2
@@ -3,9 +3,9 @@ LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING.txt;md5=9d4316fe434ba450dca4da25348ca5a3" # This package builds a kernel module, use kernel PR as base and append a local -MACHINE_KERNEL_PR_append = "d" +MACHINE_KERNEL_PR:append = "d" PR = "${MACHINE_KERNEL_PR}" -PV_append = "+git${SRCPV}" +PV:append = "+git${SRCPV}" S = "${WORKDIR}/git/debugss_module/debugss-mod"
recipes-bsp/dsptop/dsptop_git.bb +2 -2
@@ -21,8 +21,8 @@ do_install() { COMPATIBLE_MACHINE = "dra7xx|keystone" PACKAGE_ARCH = "${MACHINE_ARCH}" -RDEPENDS_${PN} = "debugss-module-drv bash" -RDEPENDS_${PN}_append_keystone = " temperature-module-drv" +RDEPENDS:${PN} = "debugss-module-drv bash" +RDEPENDS:${PN}:append_keystone = " temperature-module-drv" include dsptop.inc
recipes-bsp/dsptop/libulm_git.bb +2 -2
@@ -35,12 +35,12 @@ do_install() { COMPATIBLE_MACHINE = "dra7xx|keystone" PACKAGE_ARCH = "${MACHINE_ARCH}" -FILES_${PN}-dev += "\ +FILES:${PN}-dev += "\ ${datadir}/ti/ulm \ " include dsptop.inc -ALLOW_EMPTY_${PN} = "1" +ALLOW_EMPTY:${PN} = "1" PARALLEL_MAKE= ""
recipes-bsp/dsptop/temperature-module-drv_git.bb +2 -2
@@ -3,9 +3,9 @@ LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING.txt;md5=9d4316fe434ba450dca4da25348ca5a3" # This package builds a kernel module, use kernel PR as base and append a local -MACHINE_KERNEL_PR_append = "a" +MACHINE_KERNEL_PR:append = "a" PR = "${MACHINE_KERNEL_PR}" -PV_append = "+git${SRCPV}" +PV:append = "+git${SRCPV}" S = "${WORKDIR}/git/temperature_module/temperature-mod"
recipes-bsp/edma3-lld/edma3-lld-rtos_git.bb +5 -5
@@ -50,7 +50,7 @@ TARGETLIST_keystone = " \ a15 \ " -PLATFORMLIST_append_dra7xx-evm = " \ +PLATFORMLIST:append_dra7xx-evm = " \ tda3xx-evm \ "
@@ -76,7 +76,7 @@ TARGETLIST_omapl1 = " \ 674 \ " -EXTRA_OEMAKE_remove = "TARGET=66" +EXTRA_OEMAKE:remove = "TARGET=66" FORMAT="ELF" S = "${WORKDIR}/git"
@@ -139,7 +139,7 @@ do_install () { cp ${CP_ARGS} ${S}/* ${D}${EDMA3_LLD_INSTALL_DIR_RECIPE} } -INSANE_SKIP_${PN}-dev = "arch ldflags file-rdeps" +INSANE_SKIP:${PN}-dev = "arch ldflags file-rdeps" -ALLOW_EMPTY_${PN} = "1" -FILES_${PN}-dev += "${EDMA3_LLD_INSTALL_DIR_RECIPE}" +ALLOW_EMPTY:${PN} = "1" +FILES:${PN}-dev += "${EDMA3_LLD_INSTALL_DIR_RECIPE}"
recipes-bsp/edma3-lld/edma3-lld_git.bb +3 -3
@@ -16,7 +16,7 @@ PLATFORMLIST = "tci6636k2h-evm \ PACKAGES =+ "${PN}-test" -FILES_${PN}-test = "${bindir}/*" +FILES:${PN}-test = "${bindir}/*" S = "${WORKDIR}/git"
@@ -74,5 +74,5 @@ do_install () { ${D}/${bindir}/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg } -INSANE_SKIP_${PN} += "ldflags" -INSANE_SKIP_${PN}-test += "ldflags" +INSANE_SKIP:${PN} += "ldflags" +INSANE_SKIP:${PN}-test += "ldflags"
recipes-bsp/emac-lld/emac-lld-rtos_git.bb +6 -6
@@ -12,13 +12,13 @@ LIC_FILES_CHKSUM = "file://emacver.h;beginline=1;endline=47;md5=f66bb3695972ca2a COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|k2g|omapl1|c665x-evm|k3" PACKAGE_ARCH = "${MACHINE_ARCH}" -DEPENDS_append = " board-rtos osal-rtos" -DEPENDS_append_ti33x = " starterware-rtos" -DEPENDS_append_ti43x = " starterware-rtos" -DEPENDS_append_k2g = " cppi-lld-rtos qmss-lld-rtos" +DEPENDS:append = " board-rtos osal-rtos" +DEPENDS:append_ti33x = " starterware-rtos" +DEPENDS:append_ti43x = " starterware-rtos" +DEPENDS:append_k2g = " cppi-lld-rtos qmss-lld-rtos" -DEPENDS_remove_k3 = "board-rtos " -DEPENDS_append_k3 = " udma-lld-rtos trace-rtos" +DEPENDS:remove_k3 = "board-rtos " +DEPENDS:append_k3 = " udma-lld-rtos trace-rtos" # Build with make instead of XDC TI_PDK_XDCMAKE = "0"
recipes-bsp/fatfs-rtos/fatfs-rtos_git.bb +1 -1
@@ -14,7 +14,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " mmcsd-lld-rtos \ +DEPENDS:append = " mmcsd-lld-rtos \ osal-rtos \ "
recipes-bsp/faultmanagement/faultmanagement-rtos_git.bb +2 -2
@@ -25,12 +25,12 @@ PR = "r0" S = "${WORKDIR}/${FAULT_MANAGEMENT_GIT_DESTSUFFIX}" -DEPENDS_append_keystone = " qmss-lld-rtos \ +DEPENDS:append_keystone = " qmss-lld-rtos \ cppi-lld-rtos \ pa-lld-rtos \ " -DEPENDS_append_k2hk = " aif2-lld-rtos \ +DEPENDS:append_k2hk = " aif2-lld-rtos \ " # HTML doc link params PDK_COMP_LINK_TEXT = "Fault Management"
recipes-bsp/fftc-lld/fftc-lld-rtos_git.bb +1 -1
@@ -14,7 +14,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append= " qmss-lld-rtos \ +DEPENDS:append= " qmss-lld-rtos \ cppi-lld-rtos \ "
recipes-bsp/formfactor/formfactor_0.0.bbappend +1 -1
@@ -1 +1 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
recipes-bsp/fvid2/fvid2-rtos_git.bb +3 -3
@@ -14,7 +14,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ " # Build with make instead of XDC
@@ -62,6 +62,6 @@ do_install() { find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/fvid2 \; } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" -INSANE_SKIP_${PN} = "arch ldflags" +INSANE_SKIP:${PN} = "arch ldflags"
recipes-bsp/gc320-drivers/ti-gc320-driver_5.0.11.p7.bb +1 -1
@@ -7,7 +7,7 @@ inherit module features_check REQUIRED_MACHINE_FEATURES = "gc320" -MACHINE_KERNEL_PR_append = "i" +MACHINE_KERNEL_PR:append = "i" PR = "${MACHINE_KERNEL_PR}" # Need to branch out with ${PV} var
recipes-bsp/goodix-fw/goodix-fw_git.bb +1 -1
@@ -26,4 +26,4 @@ do_install() { install -m 0644 ${S}/ti-evm/${ORIGIN} ${D}${base_libdir}/firmware/${TARGET} } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware"
recipes-bsp/gpio-lld/gpio-lld-rtos_git.bb +4 -4
@@ -15,13 +15,13 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos \ +DEPENDS:append_ti33x = " starterware-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos \ +DEPENDS:append_ti43x = " starterware-rtos \ " -DEPENDS_append_k3 = " sciclient-rtos \ +DEPENDS:append_k3 = " sciclient-rtos \ " # Build with make instead of XDC
recipes-bsp/gpmc-lld/gpmc-lld-rtos_git.bb +3 -3
@@ -15,11 +15,11 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos \ +DEPENDS:append_ti33x = " starterware-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos \ +DEPENDS:append_ti43x = " starterware-rtos \ " # Build with make instead of XDC
recipes-bsp/hplib/hplib-mod_git.bb +1 -1
@@ -7,7 +7,7 @@ DEPENDS = "hplib" include hplib.inc # This package builds a kernel module, use kernel PR as base and append a local -MACHINE_KERNEL_PR_append = "b" +MACHINE_KERNEL_PR:append = "b" PR = "${MACHINE_KERNEL_PR}" S ="${WORKDIR}/git/ti/runtime/hplib/module"
recipes-bsp/hplib/hplib-test_git.bb +1 -1
@@ -12,7 +12,7 @@ CHOICELIST = "yes no" S = "${WORKDIR}/git/ti/runtime/hplib" -EXTRA_OEMAKE += '-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}' +EXTRA_OEMAKE += '-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}' do_compile () { for device in ${DEVICELIST}
recipes-bsp/hplib/hplib_git.bb +2 -2
@@ -3,7 +3,7 @@ LICENSE = "BSD-3-Clause" LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/runtime/hplib/src/COPYING.txt;md5=b7982a377c680ad71ca2fbb735982462" DEPENDS = "common-csl-ip rm-lld qmss-lld sa-lld pktlib" -RDEPENDS_${PN} = "hplib-mod" +RDEPENDS:${PN} = "hplib-mod" include hplib.inc
@@ -13,7 +13,7 @@ CHOICELIST = "yes no" S = "${WORKDIR}/git/ti/runtime/hplib" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_compile () { for device in ${DEVICELIST}
recipes-bsp/hyplnk-lld/hyplnk-lld-rtos_git.bb +1 -1
@@ -6,7 +6,7 @@ require recipes-bsp/hyplnk-lld/hyplnk-lld.inc PR = "${INC_PR}.0" -COMPATIBLE_MACHINE_append = "|c66x" +COMPATIBLE_MACHINE:append = "|c66x" # HTML doc link params PDK_COMP_LINK_TEXT = "HYPLNK LLD"
recipes-bsp/hyplnk-lld/hyplnk-lld-test_git.bb +3 -3
@@ -5,11 +5,11 @@ PR = "${INC_PR}.0" DEPENDS = "common-csl-ip hyplnk-lld" do_compile () { - make -f makefile_armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \ + make -f makefile:armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \ HYPLNK_SRC_DIR="${S}" for device in ${DEVICELIST} do - make -f makefile_armv7 tests examples \ + make -f makefile:armv7 tests examples \ PDK_INSTALL_PATH="${STAGING_INCDIR}" \ DEVICE="$device" HYPLNK_SRC_DIR="${S}" done
@@ -18,7 +18,7 @@ do_compile () { do_install () { for device in ${DEVICELIST} do - make -f makefile_armv7 installbin \ + make -f makefile:armv7 installbin \ PDK_INSTALL_PATH="${STAGING_INCDIR}" DEVICE="$device" \ HYPLNK_SRC_DIR="${S}" \ INSTALL_BIN_BASE_DIR="${D}/${bindir}"
recipes-bsp/hyplnk-lld/hyplnk-lld_git.bb +3 -3
@@ -5,17 +5,17 @@ PR = "${INC_PR}.1" DEPENDS = "common-csl-ip" do_compile () { - make -f makefile_armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \ + make -f makefile:armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \ HYPLNK_SRC_DIR="${S}" for device in ${DEVICELIST} do - make -f makefile_armv7 lib PDK_INSTALL_PATH="${STAGING_INCDIR}"\ + make -f makefile:armv7 lib PDK_INSTALL_PATH="${STAGING_INCDIR}"\ DEVICE="$device" HYPLNK_SRC_DIR="${S}" done } do_install () { - make -f makefile_armv7 install PDK_INSTALL_PATH="${STAGING_INCDIR}" \ + make -f makefile:armv7 install PDK_INSTALL_PATH="${STAGING_INCDIR}" \ INSTALL_INC_BASE_DIR="${D}/${includedir}" \ INSTALL_LIB_BASE_DIR="${D}${libdir}" HYPLNK_SRC_DIR="${S}" chown -R root:root ${D}
recipes-bsp/i2c-lld/i2c-lld-rtos_git.bb +7 -7
@@ -15,21 +15,21 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos \ +DEPENDS:append_ti33x = " starterware-rtos \ pruss-lld-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos \ +DEPENDS:append_ti43x = " starterware-rtos \ pruss-lld-rtos \ " -DEPENDS_append_am57xx-evm = " pruss-lld-rtos \ +DEPENDS:append_am57xx-evm = " pruss-lld-rtos \ " -DEPENDS_append_k2g = " pruss-lld-rtos \ +DEPENDS:append_k2g = " pruss-lld-rtos \ " -DEPENDS_append_j7 = " sciclient-rtos \ +DEPENDS:append_j7 = " sciclient-rtos \ " # Build with make instead of XDC
@@ -39,7 +39,7 @@ TI_PDK_XDCMAKE = "0" export PDK_I2C_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch" # HTML doc link params PDK_COMP_LINK_TEXT = "I2C LLD"
recipes-bsp/ibl-boot/ibl-boot-rtos_git.bb +3 -3
@@ -33,7 +33,7 @@ PR = "r2" S = "${WORKDIR}/git" -PATH_prepend = "${TI_CGT6X_7_INSTALL_DIR}/bin:" +PATH:prepend = "${TI_CGT6X_7_INSTALL_DIR}/bin:" IBLTARGETS = "" IBLTARGETS_c665x-evm = "evm_c6657_i2c"
@@ -66,10 +66,10 @@ do_install() { cp -rP --preserve=mode,links,timestamps --no-preserve=ownership * ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/boot/ibl } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" INHIBIT_PACKAGE_STRIP = "1" INHIBIT_SYSROOT_STRIP = "1" INHIBIT_PACKAGE_DEBUG_SPLIT = "1" -INSANE_SKIP_${PN} = "arch file-rdeps" +INSANE_SKIP:${PN} = "arch file-rdeps"
recipes-bsp/icss-emac-lld/icss-emac-lld-rtos_git.bb +4 -4
@@ -5,12 +5,12 @@ require icss-emac-lld.inc PR = "${INC_PR}.0" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ pruss-lld-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos \ +DEPENDS:append_ti33x = " starterware-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos \ +DEPENDS:append_ti43x = " starterware-rtos \ " # Build with make instead of XDC
@@ -22,4 +22,4 @@ export DEST_ROOT="${S}" # HTML doc link params PDK_COMP_LINK_TEXT = "ICSS-EMAC LLD" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/icss-emac-lld/icss-emac-lld-test_git.bb +3 -3
@@ -2,14 +2,14 @@ DESCRIPTION = "TI ICSS-EMAC low level driver tests" DEPENDS="common-csl-ip pruss-lld icss-emac-lld osal ti-pdk-build-rtos icss-emac-lld-rtos" -DEPENDS_append_ti33x = " starterware" -DEPENDS_append_ti43x = " starterware" +DEPENDS:append_ti33x = " starterware" +DEPENDS:append_ti43x = " starterware" include icss-emac-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} PDK_PKG_PATH=${STAGING_DATADIR}/ti/ti-pdk-tree/packages ICSS_EMAC_SRC_DIR=${S}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} PDK_PKG_PATH=${STAGING_DATADIR}/ti/ti-pdk-tree/packages ICSS_EMAC_SRC_DIR=${S}" DEVICE_LIST ?= "${TI_PDK_LIMIT_SOCS}"
recipes-bsp/icss-emac-lld/icss-emac-lld_git.bb +1 -1
@@ -11,7 +11,7 @@ TARGET_NAME_ti33x = "SOC_AM335x" TARGET_NAME_ti43x = "SOC_AM437x" TARGET_NAME_k2g = "SOC_K2G" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} TARGET=${TARGET_NAME}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} TARGET=${TARGET_NAME}" do_compile () { # Build the lib
recipes-bsp/iolink-lld/iolink-lld-rtos_git.bb +3 -3
@@ -14,9 +14,9 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r2" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos \ +DEPENDS:append_ti43x = " starterware-rtos \ pruss-lld-rtos \ "
@@ -27,7 +27,7 @@ TI_PDK_XDCMAKE = "0" export PDK_IOLINK_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch" # HTML doc link params PDK_COMP_LINK_TEXT = "IOLINK LLD"
recipes-bsp/ipc-lld/ipc-lld-examples-rtos_git.bb +12 -12
@@ -62,7 +62,7 @@ do_install() { done } -do_install_append_j7() { +do_install:append_j7() { #copy ipc_echo_testb binaries for J721 install -m 0644 ${REMOTE_FWB_BIN_DIR}/$board/ipc_echo_testb_mcu1_0_release.xer5f ${D}${DST_BIN_PATH} install -m 0644 ${REMOTE_FWB_BIN_DIR}/$board/ipc_echo_testb_mcu1_1_release.xer5f ${D}${DST_BIN_PATH}
@@ -79,16 +79,16 @@ do_install_append_j7() { install -m 0644 ${REMOTE_FWB_BIN_DIR}/$board/ipc_echo_testb_mcu3_1_release_strip.xer5f ${D}${DST_BIN_PATH} } -do_install_append_am65xx() { +do_install:append_am65xx() { cp ${CP_ARGS} ${REMOTE_FW_DIR}/ex04_linux_baremetal_2core_echo_test/bin -d ${D}/ex04_linux_baremetal_2core_echo_test } # Set up names for the firmwares -ALTERNATIVE_${PN}_am65xx = "\ +ALTERNATIVE:${PN}_am65xx = "\ am65x-mcu-r5f0_0-fw \ am65x-mcu-r5f0_1-fw \ " -ALTERNATIVE_${PN}_j7 = "\ +ALTERNATIVE:${PN}_j7 = "\ j7-mcu-r5f0_0-fw \ j7-mcu-r5f0_1-fw \ j7-main-r5f0_0-fw \
@@ -149,14 +149,14 @@ ALTERNATIVE_PRIORITY = "10" PACKAGES =+ "${PN}-rtos" # make sure that lib/firmware, and all its contents are part of the package -FILES_${PN} += "${base_libdir}/firmware" +FILES:${PN} += "${base_libdir}/firmware" -FILES_${PN}-rtos += "ex02_bios_multicore_echo_test" -FILES_${PN}-rtos += "ex01_bios_2core_echo_test" -FILES_${PN}-rtos += "ex03_linux_bios_2core_echo_test" -FILES_${PN}-rtos += "ex04_linux_baremetal_2core_echo_test" +FILES:${PN}-rtos += "ex02_bios_multicore_echo_test" +FILES:${PN}-rtos += "ex01_bios_2core_echo_test" +FILES:${PN}-rtos += "ex03_linux_bios_2core_echo_test" +FILES:${PN}-rtos += "ex04_linux_baremetal_2core_echo_test" -INSANE_SKIP_${PN} = "arch ldflags file-rdeps" -INSANE_SKIP_${PN}-rtos = "arch ldflags file-rdeps" +INSANE_SKIP:${PN} = "arch ldflags file-rdeps" +INSANE_SKIP:${PN}-rtos = "arch ldflags file-rdeps" -INSANE_SKIP_${PN}-dbg = "arch" +INSANE_SKIP:${PN}-dbg = "arch"
recipes-bsp/ipc-lld/ipc-lld-fw_git.bb +6 -6
@@ -26,21 +26,21 @@ PLATFORM_am65xx = "am65xx" PLATFORM_j7 = "j7-evm" # make sure that lib/firmware, and all its contents are part of the package -FILES_${PN} += "${base_libdir}/firmware" +FILES:${PN} += "${base_libdir}/firmware" # install all R5 & DSP ipc echo test binaries in lib/firmware/pdk-ipc, with softlinks up a level do_install() { install -d ${D}${base_libdir}/firmware/pdk-ipc } -do_install_append_am65xx() { +do_install:append_am65xx() { install -m 0644 ${AM65X_R5_FW_DIR}/ipc_echo_test_mcu1_0_release.xer5f ${D}${base_libdir}/firmware/pdk-ipc/ install -m 0644 ${AM65X_R5_FW_DIR}/ipc_echo_test_mcu1_0_release.strip.xer5f ${D}${base_libdir}/firmware/pdk-ipc/ install -m 0644 ${AM65X_R5_FW_DIR}/ipc_echo_test_mcu1_1_release.xer5f ${D}${base_libdir}/firmware/pdk-ipc/ install -m 0644 ${AM65X_R5_FW_DIR}/ipc_echo_test_mcu1_1_release.strip.xer5f ${D}${base_libdir}/firmware/pdk-ipc/ } -do_install_append_j7() { +do_install:append_j7() { install -m 0644 ${J721E_R5_DSP_FW_DIR}/ipc_echo_test_mcu1_0_release.xer5f ${D}${base_libdir}/firmware/pdk-ipc/ install -m 0644 ${J721E_R5_DSP_FW_DIR}/ipc_echo_test_mcu1_0_release.strip.xer5f ${D}${base_libdir}/firmware/pdk-ipc/ install -m 0644 ${J721E_R5_DSP_FW_DIR}/ipc_echo_testb_mcu1_0_release.xer5f ${D}${base_libdir}/firmware/pdk-ipc/
@@ -74,11 +74,11 @@ do_install_append_j7() { } # Set up names for the firmwares -ALTERNATIVE_${PN}_am65xx = "\ +ALTERNATIVE:${PN}_am65xx = "\ am65x-mcu-r5f0_0-fw \ am65x-mcu-r5f0_1-fw \ " -ALTERNATIVE_${PN}_j7 = "\ +ALTERNATIVE:${PN}_j7 = "\ j7-mcu-r5f0_0-fw \ j7-mcu-r5f0_1-fw \ j7-main-r5f0_0-fw \
@@ -189,7 +189,7 @@ INHIBIT_SYSROOT_STRIP = "1" # This is used to prevent the build system to split the debug info in a separate file INHIBIT_PACKAGE_DEBUG_SPLIT = "1" # As it likely to be a different arch from the Yocto build, disable checking by adding "arch" to INSANE_SKIP -INSANE_SKIP_${PN} += "arch" +INSANE_SKIP:${PN} += "arch" # we don't want to configure and build the source code do_compile[noexec] = "1"
recipes-bsp/ipc-lld/ipc-lld-rtos_git.bb +3 -3
@@ -38,8 +38,8 @@ do_install() { find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/ipc \; } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" -INSANE_SKIP_${PN} = "arch ldflags file-rdeps" +INSANE_SKIP:${PN} = "arch ldflags file-rdeps" -INSANE_SKIP_${PN}-dbg = "arch" +INSANE_SKIP:${PN}-dbg = "arch"
recipes-bsp/ipc-lld/ipc-lld.inc +1 -1
@@ -26,4 +26,4 @@ PDK_COMP_LINK_TEXT = "IPCLLD" EXTRA_OEMAKE = "PDK_INSTALL_PATH=${PDK_INSTALL_PATH} " -TI_PDK_LIMIT_CORES_append_am65xx-evm = " mcu1_1 " +TI_PDK_LIMIT_CORES:append_am65xx-evm = " mcu1_1 "
recipes-bsp/ipumm-fw/ipumm-fw_git.bb +3 -3
@@ -9,7 +9,7 @@ inherit features_check REQUIRED_MACHINE_FEATURES = "mmip" -RDEPENDS_${PN} = "libdce" +RDEPENDS:${PN} = "libdce" SRC_URI = "git://git.ti.com/ivimm/ipumm.git;protocol=git"
@@ -59,9 +59,9 @@ do_install() { install -m 0644 ${S}/${TARGET_MAP} ${D}${base_libdir}/firmware/${TARGET}.map } -ALTERNATIVE_${PN} = "dra7-ipu2-fw.xem4" +ALTERNATIVE:${PN} = "dra7-ipu2-fw.xem4" ALTERNATIVE_LINK_NAME[dra7-ipu2-fw.xem4] = "${base_libdir}/firmware/${TARGET}" ALTERNATIVE_TARGET[dra7-ipu2-fw.xem4] = "${base_libdir}/firmware/${TARGET}.${BPN}" ALTERNATIVE_PRIORITY = "20" -FILES_${PN} += "${base_libdir}/firmware/*" +FILES:${PN} += "${base_libdir}/firmware/*"
recipes-bsp/iqn2-lld/iqn2-lld-test_git.bb +1 -1
@@ -6,7 +6,7 @@ include iqn2-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} IQN2_SRC_DIR=${WORKDIR}/git" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} IQN2_SRC_DIR=${WORKDIR}/git" do_compile () { oe_runmake clean DEVICE=k2l
recipes-bsp/iqn2-lld/iqn2-lld_git.bb +1 -1
@@ -6,7 +6,7 @@ include iqn2-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_configure () { sed -i -e 's/march=armv7-a/march=armv7ve/' build/armv7/libiqn2_aearmv7.mk
recipes-bsp/mad-utils/mad-utils-rtos_git.bb +3 -3
@@ -23,7 +23,7 @@ PR = "r0" S = "${WORKDIR}/git" export C6X_BASE_DIR="${TI_CGT6X_7_INSTALL_DIR}" -PATH_prepend = "${TI_CGT6X_7_INSTALL_DIR}/bin:" +PATH:prepend = "${TI_CGT6X_7_INSTALL_DIR}/bin:" DEVICE = "" DEVICE_c665x-evm = "C6657"
@@ -52,6 +52,6 @@ do_install() { cp -rP --preserve=mode,links,timestamps --no-preserve=ownership * ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/boot/mad-utils } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages/ti/boot/mad-utils" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages/ti/boot/mad-utils" -INSANE_SKIP_${PN} += "arch staticdev ldflags file-rdeps" +INSANE_SKIP:${PN} += "arch staticdev ldflags file-rdeps"
recipes-bsp/mcasp-lld/mcasp-lld-rtos_git.bb +6 -6
@@ -16,16 +16,16 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " edma3-lld-rtos \ +DEPENDS:append = " edma3-lld-rtos \ osal-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos \ +DEPENDS:append_ti43x = " starterware-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos \ +DEPENDS:append_ti33x = " starterware-rtos \ " -DEPENDS_remove_k3 = "edma3-lld-rtos " -DEPENDS_append_k3 = " udma-lld-rtos \ +DEPENDS:remove_k3 = "edma3-lld-rtos " +DEPENDS:append_k3 = " udma-lld-rtos \ " # Build with make instead of XDC
@@ -35,7 +35,7 @@ export PDK_MCASP_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" export EDMA3LLD_BIOS6_INSTALLDIR = "${EDMA3_LLD_INSTALL_DIR}" -XDCPATH_append = ";${EDMA3_LLD_INSTALL_DIR}/packages" +XDCPATH:append = ";${EDMA3_LLD_INSTALL_DIR}/packages" # HTML doc link params PDK_COMP_LINK_TEXT = "MCASP LLD"
recipes-bsp/mcbsp-lld/mcbsp-lld-rtos_git.bb +2 -2
@@ -15,11 +15,11 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " edma3-lld-rtos \ +DEPENDS:append = " edma3-lld-rtos \ " export EDMA3LLD_BIOS6_INSTALLDIR = "${EDMA3_LLD_INSTALL_DIR}" -XDCPATH_append = ";${EDMA3_LLD_INSTALL_DIR}/packages" +XDCPATH:append = ";${EDMA3_LLD_INSTALL_DIR}/packages" TI_PDK_XDCMAKE = "0"
recipes-bsp/mmap-lld/mmap-lld-test_git.bb +4 -4
@@ -6,7 +6,7 @@ PR = "${INC_PR}.0" PACKAGE_ARCH = "${MACHINE_ARCH}" DEPENDS="common-csl-ip mmap-lld" -RDEPENDS_${PN}="uio-module-drv" +RDEPENDS:${PN}="uio-module-drv" DEVICELIST_k2hk = "k2h k2k" DEVICELIST_k2e = "k2e"
@@ -20,12 +20,12 @@ CHOICELIST = " yes \ do_compile () { for device in ${DEVICELIST} do - make -f makefile_armv7 clean \ + make -f makefile:armv7 clean \ PDK_INSTALL_PATH="${STAGING_INCDIR}" \ DEVICE="$device" MPAX_SRC_DIR="${S}" for choice in ${CHOICELIST} do - make -f makefile_armv7 tests examples \ + make -f makefile:armv7 tests examples \ PDK_INSTALL_PATH=${STAGING_INCDIR} \ DEVICE="$device" MPAX_SRC_DIR="${S}" \ USEDYNAMIC_LIB="$choice"
@@ -36,7 +36,7 @@ do_compile () { do_install () { for device in ${DEVICELIST} do - make -f makefile_armv7 installbin \ + make -f makefile:armv7 installbin \ PDK_INSTALL_PATH=${STAGING_INCDIR} \ DEVICE="$device" MPAX_SRC_DIR="${S}" \ INSTALL_BIN_BASE_DIR="${D}/${bindir}"
recipes-bsp/mmap-lld/mmap-lld_git.bb +2 -2
@@ -6,10 +6,10 @@ PR = "${INC_PR}.0" DEPENDS="common-csl-ip" do_compile () { - make -f makefile_armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR} + make -f makefile:armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR} } do_install () { - make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} + make -f makefile:armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} chown -R root:root ${D} }
recipes-bsp/mmcsd-lld/mmcsd-lld-rtos_git.bb +6 -6
@@ -16,16 +16,16 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " edma3-lld-rtos \ +DEPENDS:append = " edma3-lld-rtos \ osal-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos \ +DEPENDS:append_ti33x = " starterware-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos \ +DEPENDS:append_ti43x = " starterware-rtos \ " -DEPENDS_remove_k3 = "edma3-lld-rtos " +DEPENDS:remove_k3 = "edma3-lld-rtos " -DEPENDS_append_k3 = " sciclient-rtos \ +DEPENDS:append_k3 = " sciclient-rtos \ " # Build with make instead of XDC
@@ -35,7 +35,7 @@ export PDK_MMCSD_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" export EDMA3LLD_BIOS6_INSTALLDIR = "${EDMA3_LLD_INSTALL_DIR}" -XDCPATH_append = ";${EDMA3_LLD_INSTALL_DIR}/packages" +XDCPATH:append = ";${EDMA3_LLD_INSTALL_DIR}/packages" # HTML doc link params PDK_COMP_LINK_TEXT = "MMCSD LLD"
recipes-bsp/netcp-pa-fw/netcp-pa-fw_git.bb +1 -1
@@ -53,4 +53,4 @@ do_install() { done } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware"
recipes-bsp/netcp-sa-fw/netcp-sa-fw_git.bb +1 -1
@@ -26,4 +26,4 @@ do_install() { install -m 0644 ${S}/ti-keystone/${TARGET} ${D}${base_libdir}/firmware/${TARGET} } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware"
recipes-bsp/nwal-lld/nwal-lld-rtos_git.bb +1 -1
@@ -6,7 +6,7 @@ require recipes-bsp/nwal-lld/nwal-lld.inc PR = "${INC_PR}.0" -DEPENDS_append = " cppi-lld-rtos \ +DEPENDS:append = " cppi-lld-rtos \ pa-lld-rtos \ pktlib-rtos \ qmss-lld-rtos \
recipes-bsp/nwal-lld/nwal-lld-test_git.bb +1 -1
@@ -6,7 +6,7 @@ include nwal-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_compile () { for device in ${DEVICELIST}
recipes-bsp/nwal-lld/nwal-lld_git.bb +1 -1
@@ -6,7 +6,7 @@ include nwal-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_compile () { for device in ${DEVICELIST}
recipes-bsp/osal/osal-rtos_git.bb +3 -3
@@ -3,10 +3,10 @@ require recipes-bsp/osal/osal.inc PR = "${INC_PR}.0" -COMPATIBLE_MACHINE_append = "|c66x|k3" +COMPATIBLE_MACHINE:append = "|c66x|k3" -DEPENDS_append_ti33x = " starterware-rtos" -DEPENDS_append_ti43x = " starterware-rtos" +DEPENDS:append_ti33x = " starterware-rtos" +DEPENDS:append_ti43x = " starterware-rtos" # Build with make instead of XDC TI_PDK_XDCMAKE = "0"
recipes-bsp/osal/osal-test_git.bb +1 -1
@@ -6,7 +6,7 @@ include osal.inc PR = "${INC_PR}.1" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} OSAL_SRC_DIR=${S}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} OSAL_SRC_DIR=${S}" do_compile () { # Build the tests
recipes-bsp/osal/osal_git.bb +1 -1
@@ -6,7 +6,7 @@ include osal.inc PR = "${INC_PR}.1" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_compile () { # Build the lib
recipes-bsp/pa-lld/pa-lld-rtos_git.bb +2 -2
@@ -3,10 +3,10 @@ SUMMARY = "TI RTOS low level driver for Packet Accelerator (PA)" inherit ti-pdk require recipes-bsp/pa-lld/pa-lld.inc -COMPATIBLE_MACHINE_append = "|c667x-evm" +COMPATIBLE_MACHINE:append = "|c667x-evm" PR = "${INC_PR}.0" -DEPENDS_append = " rm-lld-rtos" +DEPENDS:append = " rm-lld-rtos" # HTML doc link params PDK_COMP_LINK_TEXT = "PA LLD"
recipes-bsp/pa-lld/pa-lld-test_git.bb +3 -3
@@ -14,10 +14,10 @@ do_compile () { # Now build the lld unit test examples for device in ${DEVICELIST} do - make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} + make -f makefile:armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} for choice in ${CHOICELIST} do - make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" + make -f makefile:armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" done done }
@@ -25,6 +25,6 @@ do_compile () { do_install () { for device in ${DEVICELIST} do - make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir} + make -f makefile:armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir} done }
recipes-bsp/pa-lld/pa-lld_git.bb +2 -2
@@ -10,12 +10,12 @@ do_compile () { # Now build the lld in the updated directory for device in ${DEVICELIST} do - make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" + make -f makefile:armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" done } do_install () { - make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} + make -f makefile:armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} chown -R root:root ${D} # Set the generic device library symbolic link
recipes-bsp/pcie-lld/pcie-lld-rtos_git.bb +1 -1
@@ -14,7 +14,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r1" -DEPENDS_append_k3 = " udma-lld-rtos \ +DEPENDS:append_k3 = " udma-lld-rtos \ "
recipes-bsp/pktlib/pktlib-rtos_git.bb +2 -2
@@ -3,8 +3,8 @@ require pktlib.inc PR = "${INC_PR}.1" -DEPENDS_append = " rm-lld-rtos \ +DEPENDS:append = " rm-lld-rtos \ qmss-lld-rtos \ cppi-lld-rtos \ " -COMPATIBLE_MACHINE_append = "|c66x" +COMPATIBLE_MACHINE:append = "|c66x"
recipes-bsp/pktlib/pktlib_git.bb +1 -1
@@ -7,7 +7,7 @@ include pktlib.inc PR = "${INC_PR}.1" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}" do_compile () { oe_runmake lib
recipes-bsp/pm-lld/pm-lld-rtos_git.bb +8 -8
@@ -37,15 +37,15 @@ PR = "r0" S = "${WORKDIR}/${PM_LLD_GIT_DESTSUFFIX}" -DEPENDS_append = " ti-sysbios \ +DEPENDS:append = " ti-sysbios \ osal-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos \ +DEPENDS:append_ti33x = " starterware-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos \ +DEPENDS:append_ti43x = " starterware-rtos \ " -DEPENDS_append_k3 = " sciclient-rtos \ +DEPENDS:append_k3 = " sciclient-rtos \ " export PDK_PM_ROOT_PATH = "${WORKDIR}/build"
@@ -54,7 +54,7 @@ export DEST_ROOT="${S}" # Build with make instead of XDC TI_PDK_XDCMAKE = "0" -do_compile_append() { +do_compile:append() { # Delete archive created by XDC release command since it does not contain all content find -name "*.tar" -exec rm -f {} \;
@@ -65,7 +65,7 @@ do_compile_append() { # Workaround: dra7xx build requires am57xx pm libraries for opencl-monitor -TI_PDK_LIMIT_SOCS_append_dra7xx = " am571x am572x am574x" -TI_PDK_LIMIT_BOARDS_append_dra7xx = " evmAM571x evmAM572x idkAM574x" +TI_PDK_LIMIT_SOCS:append_dra7xx = " am571x am572x am574x" +TI_PDK_LIMIT_BOARDS:append_dra7xx = " evmAM571x evmAM572x idkAM574x" -INSANE_SKIP_${PN} = "arch staticdev" +INSANE_SKIP:${PN} = "arch staticdev"
recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb +1 -1
@@ -7,7 +7,7 @@ inherit module features_check REQUIRED_MACHINE_FEATURES = "gpu" -MACHINE_KERNEL_PR_append = "b" +MACHINE_KERNEL_PR:append = "b" PR = "${MACHINE_KERNEL_PR}" PACKAGE_ARCH = "${MACHINE_ARCH}"
recipes-bsp/powervr-drivers/ti-sgx-ddk-km_1.17.4948957.bb +2 -2
@@ -9,7 +9,7 @@ REQUIRED_MACHINE_FEATURES = "gpu" COMPATIBLE_MACHINE = "pandaboard|beagleboard|ti33x|ti43x|omap-a15|k3" -MACHINE_KERNEL_PR_append = "x" +MACHINE_KERNEL_PR:append = "x" PR = "${MACHINE_KERNEL_PR}" PACKAGE_ARCH = "${MACHINE_ARCH}"
@@ -37,7 +37,7 @@ TARGET_PRODUCT_pandaboard = "ti443x" EXTRA_OEMAKE += 'KERNELDIR="${STAGING_KERNEL_DIR}" TARGET_PRODUCT=${TARGET_PRODUCT} WINDOW_SYSTEM=nulldrmws' -do_compile_prepend() { +do_compile:prepend() { cd ${S}/eurasia_km/eurasiacon/build/linux2/omap_linux }
recipes-bsp/pru/pru-icss_git.bb +19 -19
@@ -18,12 +18,12 @@ require recipes-ti/includes/ti-paths.inc COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|k2g|k3" PACKAGE_ARCH = "${MACHINE_ARCH}" -PACKAGES_prepend = " \ +PACKAGES:prepend = " \ ${PN}-halt \ ${PN}-rpmsg-echo \ " -RDEPENDS_${PN}_append = " \ +RDEPENDS:${PN}:append = " \ ${PN}-halt \ ${PN}-rpmsg-echo \ "
@@ -60,10 +60,10 @@ do_install() { install -m 0644 ${S}/lib/rpmsg_lib.lib ${D}${libdir} } -FILES_${PN}-staticdev = "${libdir}" -FILES_${PN}-dev = "${includedir}" +FILES:${PN}-staticdev = "${libdir}" +FILES:${PN}-dev = "${includedir}" -do_install_append_ti33x() { +do_install:append_ti33x() { install -m 644 ${S}/examples/${PLATFORM}/PRU_Halt/gen/PRU_Halt.out \ ${D}${base_libdir}/firmware/pru for i in 0 1
@@ -73,7 +73,7 @@ do_install_append_ti33x() { done } -do_install_append_ti43x() { +do_install:append_ti43x() { install -m 644 ${S}/examples/${PLATFORM}/PRU_Halt/gen/PRU_Halt.out \ ${D}${base_libdir}/firmware/pru for i in 0 1
@@ -86,7 +86,7 @@ do_install_append_ti43x() { done } -do_install_append_omap-a15() { +do_install:append_omap-a15() { install -m 644 ${S}/examples/${PLATFORM}/PRU_Halt/gen/PRU_Halt.out \ ${D}${base_libdir}/firmware/pru for i in 1 2
@@ -99,7 +99,7 @@ do_install_append_omap-a15() { done } -do_install_append_k2g() { +do_install:append_k2g() { install -m 644 ${S}/examples/${PLATFORM}/PRU_Halt/gen/PRU_Halt.out \ ${D}${base_libdir}/firmware/pru for i in 0 1
@@ -112,7 +112,7 @@ do_install_append_k2g() { done } -do_install_append_am65xx() { +do_install:append_am65xx() { for i in 0 1 do install -m 644 ${S}/examples/${PLATFORM}/PRU_Halt/gen/PRU${i}/PRU_Halt_${i}.out \
@@ -135,7 +135,7 @@ do_install_append_am65xx() { done } -do_install_append_j7() { +do_install:append_j7() { for i in 0 1 do install -m 644 ${S}/examples/${PLATFORM}/PRU_Halt/gen/PRU${i}/PRU_Halt_${i}.out \
@@ -159,8 +159,8 @@ do_install_append_j7() { } -FILES_${PN}-halt = "${base_libdir}/firmware/pru/PRU_Halt* ${base_libdir}/firmware/pru/RTU_Halt* ${base_libdir}/firmware/pru/TX_PRU_Halt*" -FILES_${PN}-rpmsg-echo = "${base_libdir}/firmware/pru/PRU_RPMsg_Echo_Interrupt* ${base_libdir}/firmware/pru/RTU_RPMsg_Echo_Interrupt*" +FILES:${PN}-halt = "${base_libdir}/firmware/pru/PRU_Halt* ${base_libdir}/firmware/pru/RTU_Halt* ${base_libdir}/firmware/pru/TX_PRU_Halt*" +FILES:${PN}-rpmsg-echo = "${base_libdir}/firmware/pru/PRU_RPMsg_Echo_Interrupt* ${base_libdir}/firmware/pru/RTU_RPMsg_Echo_Interrupt*" # Set up names for the firmwares PRU_ICSS_ALTERNATIVES_ti33x = "am335x-pru0-fw am335x-pru1-fw"
@@ -222,11 +222,11 @@ ALTERNATIVE_LINK_NAME[j7-txpru1_0-fw] = "${base_libdir}/firmware/j7-txpru1_0-fw" ALTERNATIVE_LINK_NAME[j7-txpru1_1-fw] = "${base_libdir}/firmware/j7-txpru1_1-fw" # Create the pru-icss-halt firmware alternatives -ALTERNATIVE_pru-icss-halt = "${PRU_ICSS_ALTERNATIVES}" +ALTERNATIVE:pru-icss-halt = "${PRU_ICSS_ALTERNATIVES}" # Only Halt firmware images are supported for the Tx_PRU cores -ALTERNATIVE_pru-icss-halt_append_am65xx = " am65x-txpru0_0-fw am65x-txpru0_1-fw am65x-txpru1_0-fw am65x-txpru1_1-fw am65x-txpru2_0-fw am65x-txpru2_1-fw" -ALTERNATIVE_pru-icss-halt_append_j7 = " j7-txpru0_0-fw j7-txpru0_1-fw j7-txpru1_0-fw j7-txpru1_1-fw" +ALTERNATIVE:pru-icss-halt:append_am65xx = " am65x-txpru0_0-fw am65x-txpru0_1-fw am65x-txpru1_0-fw am65x-txpru1_1-fw am65x-txpru2_0-fw am65x-txpru2_1-fw" +ALTERNATIVE:pru-icss-halt:append_j7 = " j7-txpru0_0-fw j7-txpru0_1-fw j7-txpru1_0-fw j7-txpru1_1-fw" ALTERNATIVE_TARGET_pru-icss-halt[am335x-pru0-fw] = "${base_libdir}/firmware/pru/PRU_Halt.out" ALTERNATIVE_TARGET_pru-icss-halt[am335x-pru1-fw] = "${base_libdir}/firmware/pru/PRU_Halt.out"
@@ -282,7 +282,7 @@ ALTERNATIVE_TARGET_pru-icss-halt[j7-txpru1_1-fw] = "${base_libdir}/firmware/pru/ ALTERNATIVE_PRIORITY_pru-icss-halt = "50" # Create the pru-icss-rpmsg-echo firmware alternatives -ALTERNATIVE_pru-icss-rpmsg-echo = "${PRU_ICSS_ALTERNATIVES}" +ALTERNATIVE:pru-icss-rpmsg-echo = "${PRU_ICSS_ALTERNATIVES}" ALTERNATIVE_TARGET_pru-icss-rpmsg-echo[am335x-pru0-fw] = "${base_libdir}/firmware/pru/PRU_RPMsg_Echo_Interrupt0.out" ALTERNATIVE_TARGET_pru-icss-rpmsg-echo[am335x-pru1-fw] = "${base_libdir}/firmware/pru/PRU_RPMsg_Echo_Interrupt1.out"
@@ -326,8 +326,8 @@ ALTERNATIVE_TARGET_pru-icss-rpmsg-echo[j7-rtu1_1-fw] = "${base_libdir}/firmware/ ALTERNATIVE_PRIORITY_pru-icss-rpmsg-echo = "100" -ALLOW_EMPTY_${PN} = "1" +ALLOW_EMPTY:${PN} = "1" # This installs PRU firmware, so skip "arch" QA check -INSANE_SKIP_${PN}-halt = "arch" -INSANE_SKIP_${PN}-rpmsg-echo = "arch" +INSANE_SKIP:${PN}-halt = "arch" +INSANE_SKIP:${PN}-rpmsg-echo = "arch"
recipes-bsp/pru/pru-pwm-fw_git.bb +2 -2
@@ -34,6 +34,6 @@ do_install() { install -m 0644 ${S}/gen/pwm.out ${D}/lib/firmware/ti-pruss/am65x-pru0-pwm-fw.elf } -FILES_${PN} = "/lib/firmware" +FILES:${PN} = "/lib/firmware" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/pru/pru-swuart-fw_git.bb +3 -3
@@ -15,7 +15,7 @@ TI_PDK_COMP = "ti.drv.uart" PE = "1" -SRC_URI_append = " \ +SRC_URI:append = " \ file://0001-icss_uart-add-Makefile-for-building-firmware.patch \ file://0001-icss_uart-remove-dependency-on-PDK-CSL.patch \ "
@@ -35,6 +35,6 @@ do_install() { install -m 0644 ${S}/firmware/icss_uart/src/gen/src.out ${D}/lib/firmware/ti-pruss/pru_swuart-fw.elf } -FILES_${PN} = "/lib/firmware" +FILES:${PN} = "/lib/firmware" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/pru/ti-pru-sw-edma-driver_1.00.00.bb +3 -3
@@ -7,9 +7,9 @@ COMPATIBLE_MACHINE = "omapl138" INHIBIT_PACKAGE_STRIP = "1" -MACHINE_KERNEL_PR_append = "b" +MACHINE_KERNEL_PR:append = "b" PR = "${MACHINE_KERNEL_PR}" -PV_append = "+svn${SRCPV}" +PV:append = "+svn${SRCPV}" SRC_URI = "svn://gforge.ti.com/svn/pru_sw/;module=trunk;protocol=https;user=anonymous;pswd=''"
@@ -21,7 +21,7 @@ inherit module EXTRA_OEMAKE += "KERNEL_DIR='${STAGING_KERNEL_DIR}'" -do_compile_prepend () { +do_compile:prepend () { export CCTOOL_PREFIX="${TOOLCHAIN_PATH}/bin/${TARGET_PREFIX}" }
recipes-bsp/prueth-fw/prueth-fw-am65x-sr2_git.bb +2 -2
@@ -34,6 +34,6 @@ do_install() { done } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/prueth-fw/prueth-fw-am65x_git.bb +2 -2
@@ -32,6 +32,6 @@ do_install() { done } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/prueth-fw/prueth-fw_5.6.15.bb +2 -2
@@ -32,6 +32,6 @@ do_install() { } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/pruhsr-fw/pruhsr-fw_2.17.25.bb +2 -2
@@ -32,6 +32,6 @@ do_install() { done } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/pruprp-fw/pruprp-fw_2.17.25.bb +2 -2
@@ -33,6 +33,6 @@ do_install() { done } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/pruss-lld/pruss-lld-apps_git.bb +3 -3
@@ -2,14 +2,14 @@ DESCRIPTION = "TI PRUSS low level driver example applications" DEPENDS="common-csl-ip pruss-lld osal ti-pdk-build-rtos pruss-lld-rtos" -DEPENDS_append_ti33x = " starterware" -DEPENDS_append_ti43x = " starterware" +DEPENDS:append_ti33x = " starterware" +DEPENDS:append_ti43x = " starterware" include pruss-lld.inc PR = "${INC_PR}.0" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} PDK_PKG_PATH=${STAGING_DATADIR}/ti/ti-pdk-tree/packages PRUSS_SRC_DIR=${S}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} PDK_PKG_PATH=${STAGING_DATADIR}/ti/ti-pdk-tree/packages PRUSS_SRC_DIR=${S}" DEVICE_LIST ?= "${TI_PDK_LIMIT_SOCS}"
recipes-bsp/pruss-lld/pruss-lld-rtos_git.bb +5 -5
@@ -3,12 +3,12 @@ SUMMARY = "TI RTOS low level driver library for PRUSS" inherit ti-pdk require recipes-bsp/pruss-lld/pruss-lld.inc -COMPATIBLE_MACHINE_append = "|k3" +COMPATIBLE_MACHINE:append = "|k3" PR = "${INC_PR}.0" -DEPENDS_append = " osal-rtos" -DEPENDS_append_ti33x = " starterware-rtos" -DEPENDS_append_ti43x = " starterware-rtos" +DEPENDS:append = " osal-rtos" +DEPENDS:append_ti33x = " starterware-rtos" +DEPENDS:append_ti43x = " starterware-rtos" # Build with make instead of XDC TI_PDK_XDCMAKE = "0"
@@ -19,4 +19,4 @@ export DEST_ROOT="${WORKDIR}/build" # HTML doc link params PDK_COMP_LINK_TEXT = "PRUSS LLD" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/pruss-lld/pruss-lld-test_git.bb +1 -1
@@ -6,7 +6,7 @@ include pruss-lld.inc PR = "${INC_PR}.2" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} PRUSS_SRC_DIR=${S}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} PRUSS_SRC_DIR=${S}" DEVICE_LIST ?= "${TI_PDK_LIMIT_SOCS}"
recipes-bsp/pruss-lld/pruss-lld_git.bb +1 -1
@@ -6,7 +6,7 @@ include pruss-lld.inc PR = "${INC_PR}.2" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_compile () { # Build the lib
recipes-bsp/prusw-fw/prusw-fw_3.2.9.bb +2 -2
@@ -32,6 +32,6 @@ do_install() { } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/qmss-lld/qmss-lld-rtos_git.bb +2 -2
@@ -4,6 +4,6 @@ require qmss-lld.inc PR = "${INC_PR}.1" -COMPATIBLE_MACHINE_append = "|c66x" +COMPATIBLE_MACHINE:append = "|c66x" -DEPENDS_append = " rm-lld-rtos" +DEPENDS:append = " rm-lld-rtos"
recipes-bsp/qmss-lld/qmss-lld-test_git.bb +3 -3
@@ -14,10 +14,10 @@ do_compile () { # Now build the lld in the updated directory for device in ${DEVICELIST} do - make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S} + make -f makefile:armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S} for choice in ${CHOICELIST} do - make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" + make -f makefile:armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" done done }
@@ -25,6 +25,6 @@ do_compile () { do_install () { for device in ${DEVICELIST} do - make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir} + make -f makefile:armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir} done }
recipes-bsp/qmss-lld/qmss-lld_git.bb +4 -4
@@ -8,15 +8,15 @@ PR = "${INC_PR}.1" do_compile () { # Now build the lld - make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} + make -f makefile:armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} for device in ${DEVICELIST} do - make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="${device}" + make -f makefile:armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="${device}" done } do_install () { - make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} + make -f makefile:armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} chown -R root:root ${D} # Set the generic device library symbolic link to default k2h
@@ -35,4 +35,4 @@ INHIBIT_PACKAGE_STRIP_FILES_k2hk = "${PKGD}${libdir}/libqmss_k2h.a ${PKGD}${libd INHIBIT_PACKAGE_STRIP_FILES_k2e = "${PKGD}${libdir}/libqmss_k2e.a" INHIBIT_PACKAGE_STRIP_FILES_k2l = "${PKGD}${libdir}/libqmss_k2l.a" INHIBIT_PACKAGE_STRIP_FILES_k2g = "${PKGD}${libdir}/libqmss_k2h.a" -INHIBIT_PACKAGE_STRIP_FILES_append = " ${PKGD}${libdir}/libqmss.a" +INHIBIT_PACKAGE_STRIP_FILES:append = " ${PKGD}${libdir}/libqmss.a"
recipes-bsp/qmss-pdsp-fw/qmss-pdsp-fw_git.bb +1 -1
@@ -26,4 +26,4 @@ do_install() { install -m 0644 ${S}/ti-keystone/${ORIGIN} ${D}${base_libdir}/firmware/${TARGET} } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware"
recipes-bsp/rm-lld/rm-lld-rtos_git.bb +1 -1
@@ -1,6 +1,6 @@ inherit ti-pdk -COMPATIBLE_MACHINE_append = "|c66x" +COMPATIBLE_MACHINE:append = "|c66x" require rm-lld.inc
recipes-bsp/rm-lld/rm-lld_git.bb +4 -4
@@ -6,7 +6,7 @@ DEPENDS = "ti-ipc libdaemon" PACKAGES =+ "${PN}-test" -FILES_${PN}-test = "${bindir}/rmDspClientTest.out \ +FILES:${PN}-test = "${bindir}/rmDspClientTest.out \ ${bindir}/rmLinuxClientTest.out \ ${bindir}/rmLinuxMtClientTest.out \ ${bindir}/ti/drv/rm/test/dts_files/*.dtb"
@@ -15,10 +15,10 @@ CHOICELIST = "yes no" do_compile () { # Now build the lld - make -f makefile_armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR} RM_SRC_DIR=${S} + make -f makefile:armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR} RM_SRC_DIR=${S} for choice in ${CHOICELIST} do - make -f makefile_armv7 tests IPC_DEVKIT_INSTALL_PATH=${STAGING_INCDIR} PDK_INSTALL_PATH=${BASEDIR} USEDYNAMIC_LIB="$choice" + make -f makefile:armv7 tests IPC_DEVKIT_INSTALL_PATH=${STAGING_INCDIR} PDK_INSTALL_PATH=${BASEDIR} USEDYNAMIC_LIB="$choice" done }
@@ -26,7 +26,7 @@ do_install () { install -d ${D}${includedir}/ti/drv/rm install -d ${D}${libdir} install -d ${D}${bindir} - make -f makefile_armv7 install installbin installbin_test INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir} + make -f makefile:armv7 install installbin installbin_test INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir} chown -R root:root ${D} }
recipes-bsp/sa-lld/sa-lld-rtos_git.bb +3 -3
@@ -6,18 +6,18 @@ require recipes-bsp/sa-lld/sa-lld.inc PR = "${INC_PR}.0" -COMPATIBLE_MACHINE_append = "|c667x-evm|k3" +COMPATIBLE_MACHINE:append = "|c667x-evm|k3" # Build with make instead of XDC TI_PDK_XDCMAKE_k3 = "0" # SA promote/demote library depends on osal -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ " export PDK_SA_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch" PACKAGE_ARCH = "${MACHINE_ARCH}"
recipes-bsp/sa-lld/sa-lld-test_git.bb +2 -2
@@ -17,7 +17,7 @@ CHOICELIST = "no yes" CFLAGS += "-fcommon" PARALLEL_MAKE = "" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} SA_SRC_DIR=${S}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} SA_SRC_DIR=${S}" do_compile () { # Now build the lld in the updated directory
@@ -43,4 +43,4 @@ do_install () { done } -INSANE_SKIP_${PN} = "ldflags" +INSANE_SKIP:${PN} = "ldflags"
recipes-bsp/sa-lld/sa-lld_git.bb +1 -1
@@ -7,7 +7,7 @@ include sa-lld.inc PR = "${INC_PR}.1" PARALLEL_MAKE = "" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" do_compile () { # Now build the lld in the updated directory
recipes-bsp/sciclient/sciclient-rtos_git.bb +9 -9
@@ -14,7 +14,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r1" -DEPENDS_append = " osal-rtos common-csl-ip-rtos openssl-native" +DEPENDS:append = " osal-rtos common-csl-ip-rtos openssl-native" # Build with make instead of XDC TI_PDK_XDCMAKE = "0"
@@ -31,7 +31,7 @@ BUILD_HS_j7-hs-evm = "yes" export BUILD_HS # Sciclient for am65x supports mcu1_1 in addition to the default cores in TI_PDK_LIMIT_CORES -TI_PDK_LIMIT_CORES_append_am65xx = " mcu1_1" +TI_PDK_LIMIT_CORES:append_am65xx = " mcu1_1" # HTML doc link params PDK_COMP_LINK_TEXT = "SCICLIENT"
@@ -66,7 +66,7 @@ do_compile() { } -do_compile_prepend_am65xx-hs-evm() { +do_compile:prepend_am65xx-hs-evm() { cd ${SCICLIENT_ROOTPATH}
@@ -79,7 +79,7 @@ do_compile_prepend_am65xx-hs-evm() { cd - } -do_compile_prepend_am65xx-evm() { +do_compile:prepend_am65xx-evm() { cd ${SCICLIENT_ROOTPATH}/tools
@@ -92,7 +92,7 @@ do_compile_prepend_am65xx-evm() { } -do_compile_prepend_j7-evm() { +do_compile:prepend_j7-evm() { cd ${SCICLIENT_ROOTPATH}/tools # Create the .bin file for GP
@@ -100,7 +100,7 @@ do_compile_prepend_j7-evm() { cd - } -do_compile_prepend_j7-hs-evm() { +do_compile:prepend_j7-hs-evm() { cd ${SCICLIENT_ROOTPATH}/tools # Create the .bin file for HS
@@ -114,11 +114,11 @@ do_install() { find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/sciclient \; } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" -INSANE_SKIP_${PN} = "arch ldflags file-rdeps" +INSANE_SKIP:${PN} = "arch ldflags file-rdeps" -INSANE_SKIP_${PN}-dbg = "arch" +INSANE_SKIP:${PN}-dbg = "arch" INHIBIT_PACKAGE_DEBUG_SPLIT = "1" INHIBIT_PACKAGE_STRIP = "1"
recipes-bsp/serdes-diag/serdes-diag-rtos_git.bb +1 -1
@@ -32,4 +32,4 @@ TI_PDK_XDCMAKE_k3 = "0" # HTML doc link params PDK_COMP_LINK_TEXT = "SERDES Diagnostics" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/serdes-fw/serdes-fw_git.bb +1 -1
@@ -26,4 +26,4 @@ do_install() { done } -FILES_${PN} = "${base_libdir}/firmware" +FILES:${PN} = "${base_libdir}/firmware"
recipes-bsp/spi-lld/spi-lld-rtos_git.bb +6 -6
@@ -14,14 +14,14 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ edma3-lld-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos pruss-lld-rtos gpio-lld-rtos" -DEPENDS_append_ti43x = " starterware-rtos pruss-lld-rtos gpio-lld-rtos" +DEPENDS:append_ti33x = " starterware-rtos pruss-lld-rtos gpio-lld-rtos" +DEPENDS:append_ti43x = " starterware-rtos pruss-lld-rtos gpio-lld-rtos" -DEPENDS_remove_k3 = "edma3-lld-rtos " -DEPENDS_append_k3 = " udma-lld-rtos" +DEPENDS:remove_k3 = "edma3-lld-rtos " +DEPENDS:append_k3 = " udma-lld-rtos" # Build with make instead of XDC
@@ -31,7 +31,7 @@ export PDK_SPI_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" export EDMA3LLD_BIOS6_INSTALLDIR = "${EDMA3_LLD_INSTALL_DIR}" -XDCPATH_append = ";${EDMA3_LLD_INSTALL_DIR}/packages" +XDCPATH:append = ";${EDMA3_LLD_INSTALL_DIR}/packages" # HTML doc link params PDK_COMP_LINK_TEXT = "SPI LLD"
recipes-bsp/srio-lld/srio-lld-rtos_git.bb +2 -2
@@ -6,10 +6,10 @@ require recipes-bsp/srio-lld/srio-lld.inc PR = "${INC_PR}.0" -DEPENDS_append = " cppi-lld-rtos \ +DEPENDS:append = " cppi-lld-rtos \ qmss-lld-rtos \ " -COMPATIBLE_MACHINE_append = "|c66x" +COMPATIBLE_MACHINE:append = "|c66x" PACKAGE_ARCH = "${MACHINE_ARCH}"
recipes-bsp/srio-lld/srio-lld.inc +1 -1
@@ -15,4 +15,4 @@ DEVICELIST = "k2h k2k" BASEDIR = "${WORKDIR}/git" -EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}" +EXTRA_OEMAKE = "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
recipes-bsp/starterware/starterware-rtos_git.bb +2 -2
@@ -24,10 +24,10 @@ do_install() { find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/starterware \; } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" INHIBIT_PACKAGE_STRIP = "1" INHIBIT_SYSROOT_STRIP = "1" INHIBIT_PACKAGE_DEBUG_SPLIT = "1" -INSANE_SKIP_${PN} = "arch staticdev file-rdeps" +INSANE_SKIP:${PN} = "arch staticdev file-rdeps"
recipes-bsp/starterware/starterware_git.bb +1 -1
@@ -2,7 +2,7 @@ require starterware.inc PR = "${INC_PR}.0" -ALLOW_EMPTY_${PN} = "1" +ALLOW_EMPTY:${PN} = "1" CLEANBROKEN = "1"
recipes-bsp/tcp3d-lld/tcp3d-lld-rtos_git.bb +2 -2
@@ -14,10 +14,10 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " edma3-lld-rtos" +DEPENDS:append = " edma3-lld-rtos" export EDMA3LLD_BIOS6_INSTALLDIR = "${EDMA3_LLD_INSTALL_DIR}" -XDCPATH_append = ";${EDMA3_LLD_INSTALL_DIR}/packages" +XDCPATH:append = ";${EDMA3_LLD_INSTALL_DIR}/packages" # HTML doc link params PDK_COMP_LINK_TEXT = "TCP3D LLD"
recipes-bsp/ti-ocf-crypto-module/ti-ocf-crypto-module_1.0.bb +3 -3
@@ -19,13 +19,13 @@ S = "${WORKDIR}/trunk" inherit module -MACHINE_KERNEL_PR_append = "b" +MACHINE_KERNEL_PR:append = "b" PR = "${MACHINE_KERNEL_PR}" -PV_append = "+svn${SRCPV}" +PV:append = "+svn${SRCPV}" EXTRA_OEMAKE += "KERNEL_DIR=${STAGING_KERNEL_DIR}" -do_compile_prepend () { +do_compile:prepend () { sed -i "s/arm-none-linux-gnueabi-/${TARGET_PREFIX}/g" ${S}/Makefile }
recipes-bsp/ti-sci-fw/ti-sci-fw-source_git.bb +2 -2
@@ -20,7 +20,7 @@ do_compile[noexec] = "1" SRCIPK_SRC_DIR = "${WORKDIR}/imggen" SRCIPK_INSTALL_DIR = "board-support/k3-image-gen-${PV}" -FILES_${PN} = "${SRCIPK_INSTALL_DIR}" +FILES:${PN} = "${SRCIPK_INSTALL_DIR}" do_install() { # Copy sources for packaging
@@ -42,4 +42,4 @@ do_install() { } # Do not perform any QA checks on source package -INSANE_SKIP_${PN} += "${ALL_QA}" +INSANE_SKIP:${PN} += "${ALL_QA}"
recipes-bsp/ti-sci-fw/ti-sci-fw_0.1.1.50.bb +1 -1
@@ -25,7 +25,7 @@ do_install() { install -m 0644 ${S}/ti-keystone/${TARGET} ${D}/boot/${TARGET} } -FILES_${PN} = "/boot" +FILES:${PN} = "/boot" inherit deploy
recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb +7 -7
@@ -1,15 +1,15 @@ require recipes-bsp/ti-sci-fw/ti-sci-fw.inc DEPENDS = "openssl-native u-boot-mkimage-native dtc-native" -DEPENDS_append_j7200-evm-k3r5 = " virtual/bootloader" -DEPENDS_append_am64xx-evm-k3r5 = " virtual/bootloader" +DEPENDS:append_j7200-evm-k3r5 = " virtual/bootloader" +DEPENDS:append_am64xx-evm-k3r5 = " virtual/bootloader" CLEANBROKEN = "1" PR = "r1" # Loaded by R5F core COMPATIBLE_MACHINE = "k3r5" -COMPATIBLE_MACHINE_aarch64 = "null" +COMPATIBLE_MACHINE:aarch64 = "null" PACKAGE_ARCH = "${MACHINE_ARCH}"
@@ -49,10 +49,10 @@ EXTRA_OEMAKE = "\ EXTRA_OEMAKE_HS = " \ HS=1 SYSFW_HS_PATH="${S}/ti-sysfw/${SYSFW_BASE}-enc.bin" SYSFW_HS_INNER_CERT_PATH="${S}/ti-sysfw/${SYSFW_BASE}-cert.bin" \ " -EXTRA_OEMAKE_append = "${@['',' ${EXTRA_OEMAKE_HS}']['${SYSFW_SUFFIX}' == 'hs']}" +EXTRA_OEMAKE:append = "${@['',' ${EXTRA_OEMAKE_HS}']['${SYSFW_SUFFIX}' == 'hs']}" -EXTRA_OEMAKE_append_j7200-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin"" -EXTRA_OEMAKE_append_am64xx-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin"" +EXTRA_OEMAKE:append_j7200-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin"" +EXTRA_OEMAKE:append_am64xx-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin"" do_compile() { cd ${WORKDIR}/imggen/
@@ -68,7 +68,7 @@ do_install() { fi } -FILES_${PN} = "/boot" +FILES:${PN} = "/boot" inherit deploy
recipes-bsp/traceframework/traceframework-rtos_git.bb +1 -1
@@ -4,7 +4,7 @@ require traceframework.inc PR = "${INC_PR}.2" -XDCPATH_append = ";${UIA_INSTALL_DIR}/packages" +XDCPATH:append = ";${UIA_INSTALL_DIR}/packages" # HTML doc link params PDK_COMP_LINK_TEXT = "Trace Framework"
recipes-bsp/traceframework/traceframework_git.bb +2 -2
@@ -8,7 +8,7 @@ PR = "${INC_PR}.0" BASEDIR = "${WORKDIR}/git" -EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} \ +EXTRA_OEMAKE += "-f makefile:armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} \ CUIA_INSTALL_DIR=${STAGING_INCDIR} CUIA_LIB_DIR=${STAGING_LIBDIR}" do_compile () {
@@ -34,7 +34,7 @@ do_install() { PACKAGES =+ "${PN}-test" -FILES_${PN}-test = "${bindir}/tfw*.out \ +FILES:${PN}-test = "${bindir}/tfw*.out \ ${bindir}/*.txt" INHIBIT_PACKAGE_STRIP_FILES = "${PKGD}${libdir}/libtraceframework.a"
recipes-bsp/transport-rtos/bmet-eth-rtos_git.bb +1 -1
@@ -9,7 +9,7 @@ LIC_FILES_CHKSUM = "file://bmet_transport.h;beginline=12;endline=40;md5=6d209c69 COMPATIBLE_MACHINE = "k2hk|k2e|k2l" -DEPENDS_append = " qmss-lld-rtos \ +DEPENDS:append = " qmss-lld-rtos \ cppi-lld-rtos \ "
recipes-bsp/transport-rtos/nimu-icss-rtos_git.bb +5 -5
@@ -9,13 +9,13 @@ LIC_FILES_CHKSUM = "file://nimu_icssEth.h;beginline=1;endline=35;md5=3ea633a510b COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|k2g|c66x|omapl1|k3" -DEPENDS_append = " ti-ndk \ +DEPENDS:append = " ti-ndk \ pruss-lld-rtos \ icss-emac-lld-rtos \ " -DEPENDS_append_c665x-evm = " emac-lld-rtos" -DEPENDS_append_c667x-evm = " pa-lld-rtos" -DEPENDS_append_omapl1 = " emac-lld-rtos" +DEPENDS:append_c665x-evm = " emac-lld-rtos" +DEPENDS:append_c667x-evm = " pa-lld-rtos" +DEPENDS:append_omapl1 = " emac-lld-rtos" TI_PDK_COMP = "ti.transport.ndk.nimu_icss"
@@ -26,4 +26,4 @@ export PDK_NIMU_ICSS_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" export NDK_INSTALL_PATH = "${NDK_INSTALL_DIR}" -XDCPATH_append = ";${NDK_INSTALL_DIR}/packages" +XDCPATH:append = ";${NDK_INSTALL_DIR}/packages"
recipes-bsp/transport-rtos/nimu-rtos_git.bb +14 -14
@@ -11,19 +11,19 @@ COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|keystone|c66x|omapl1|k3" TI_PDK_COMP = "ti.transport.ndk.nimu" -DEPENDS_append = " ti-ndk osal-rtos" -DEPENDS_append_ti33x = " starterware-rtos emac-lld-rtos" -DEPENDS_append_ti43x = " starterware-rtos emac-lld-rtos" -DEPENDS_append_omap-a15 = " emac-lld-rtos" -DEPENDS_append_keystone = " qmss-lld-rtos cppi-lld-rtos" -DEPENDS_append_k2hk = " pa-lld-rtos" -DEPENDS_append_k2e = " pa-lld-rtos" -DEPENDS_append_k2l = " pa-lld-rtos" -DEPENDS_append_k2g = " emac-lld-rtos" -DEPENDS_append_c665x-evm = " emac-lld-rtos" -DEPENDS_append_c667x-evm = " pa-lld-rtos cppi-lld-rtos" -DEPENDS_append_omapl1 = " emac-lld-rtos" -DEPENDS_append_k3 = " emac-lld-rtos pruss-lld-rtos" +DEPENDS:append = " ti-ndk osal-rtos" +DEPENDS:append_ti33x = " starterware-rtos emac-lld-rtos" +DEPENDS:append_ti43x = " starterware-rtos emac-lld-rtos" +DEPENDS:append_omap-a15 = " emac-lld-rtos" +DEPENDS:append_keystone = " qmss-lld-rtos cppi-lld-rtos" +DEPENDS:append_k2hk = " pa-lld-rtos" +DEPENDS:append_k2e = " pa-lld-rtos" +DEPENDS:append_k2l = " pa-lld-rtos" +DEPENDS:append_k2g = " emac-lld-rtos" +DEPENDS:append_c665x-evm = " emac-lld-rtos" +DEPENDS:append_c667x-evm = " pa-lld-rtos cppi-lld-rtos" +DEPENDS:append_omapl1 = " emac-lld-rtos" +DEPENDS:append_k3 = " emac-lld-rtos pruss-lld-rtos" # Build with make instead of XDC TI_PDK_XDCMAKE = "0"
@@ -32,4 +32,4 @@ export PDK_NIMU_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" export NDK_INSTALL_PATH = "${NDK_INSTALL_DIR}" -XDCPATH_append = ";${NDK_INSTALL_DIR}/packages" +XDCPATH:append = ";${NDK_INSTALL_DIR}/packages"
recipes-bsp/transport-rtos/timesync-rtos_git.bb +2 -2
@@ -9,7 +9,7 @@ LIC_FILES_CHKSUM = "file://timeSync_ver.h;beginline=23;endline=45;md5=4bd873035e COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|k2g" -DEPENDS_append = " ti-ndk \ +DEPENDS:append = " ti-ndk \ osal-rtos \ pruss-lld-rtos \ icss-emac-lld-rtos \
@@ -28,4 +28,4 @@ export DEST_ROOT="${S}" export NDK_INSTALL_PATH = "${NDK_INSTALL_DIR}" export EDMA3LLD_BIOS6_INSTALLDIR = "${EDMA3_LLD_INSTALL_DIR}" -XDCPATH_append = ";${NDK_INSTALL_DIR}/packages" +XDCPATH:append = ";${NDK_INSTALL_DIR}/packages"
recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend +2 -2
@@ -8,7 +8,7 @@ TFA_BUILD_TARGET_k3 = "all" TFA_INSTALL_TARGET_k3 = "bl31" TFA_SPD_k3 = "opteed" -do_compile_append_am65xx-hs-evm() { +do_compile:append_am65xx-hs-evm() { export TI_SECURE_DEV_PKG=${TI_SECURE_DEV_PKG} ( cd ${BUILD_DIR}; \ mv bl31.bin bl31.bin.unsigned; \
@@ -16,7 +16,7 @@ do_compile_append_am65xx-hs-evm() { ) } -do_compile_append_j7-hs-evm() { +do_compile:append_j7-hs-evm() { export TI_SECURE_DEV_PKG=${TI_SECURE_DEV_PKG} ( cd ${BUILD_DIR}; \ mv bl31.bin bl31.bin.unsigned; \
recipes-bsp/u-boot/u-boot-ti.inc +13 -13
@@ -16,7 +16,7 @@ SPL_BINARY ?= "MLO" require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot-common.inc require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot:" +FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot:" SUMMARY = "u-boot bootloader for TI devices"
@@ -28,7 +28,7 @@ UBOOT_GIT_URI = "git://git.ti.com/ti-u-boot/ti-u-boot.git" UBOOT_GIT_PROTOCOL = "git" SRC_URI = "${UBOOT_GIT_URI};protocol=${UBOOT_GIT_PROTOCOL};branch=${BRANCH}" -PV_append = "+git${SRCPV}" +PV:append = "+git${SRCPV}" # u-boot needs devtree compiler to parse dts files DEPENDS += "dtc-native bc-native lzop-native flex-native bison-native"
@@ -39,17 +39,17 @@ PACKAGECONFIG[atf] = "ATF=${STAGING_DIR_HOST}/firmware/bl31.bin,,trusted-firmwar PACKAGECONFIG[optee] = "TEE=${STAGING_DIR_HOST}${nonarch_base_libdir}/firmware/bl32.bin,,optee-os" PACKAGECONFIG[dm] = "DM=${STAGING_DIR_HOST}${nonarch_base_libdir}/firmware/pdk-ipc/${DM_FIRMWARE},,ti-rtos-firmware" -PACKAGECONFIG_append_aarch64 = " atf optee" -PACKAGECONFIG_append_j7 = " dm" +PACKAGECONFIG:append:aarch64 = " atf optee" +PACKAGECONFIG:append_j7 = " dm" COMPATIBLE_MACHINE = "(ti-soc)" EXTRA_OEMAKE += "${PACKAGECONFIG_CONFARGS}" PROVIDES += "u-boot" -PKG_${PN} = "u-boot" -PKG_${PN}-dev = "u-boot-dev" -PKG_${PN}-dbg = "u-boot-dbg" +PKG:${PN} = "u-boot" +PKG:${PN}-dev = "u-boot-dev" +PKG:${PN}-dbg = "u-boot-dbg" S = "${WORKDIR}/git"
@@ -115,7 +115,7 @@ UBOOT_HS_2ND_BINARY = "u-boot-spl_HS_2ND" UBOOT_HS_2ND_IMAGE = "u-boot-spl_HS_2ND-${MACHINE}-${PV}-${PR}" UBOOT_HS_2ND_SYMLINK = "u-boot-spl_HS_2ND-${MACHINE}" -do_install_append () { +do_install:append () { if [ -n "${UBOOT_CONFIG}" ] then for config in ${UBOOT_MACHINE}; do
@@ -178,7 +178,7 @@ do_install_append () { fi } -do_deploy_append () { +do_deploy:append () { if [ -n "${UBOOT_CONFIG}" ] then for config in ${UBOOT_MACHINE}; do
@@ -275,7 +275,7 @@ do_deploy_append () { rm ${DEPLOYDIR}/${PN}-initial-env-${MACHINE}-${PV}-${PR} || true } -do_install_append_keystone () { +do_install:append_keystone () { if [ -n "${UBOOT_CONFIG}" ] then for config in ${UBOOT_MACHINE}; do
@@ -324,7 +324,7 @@ do_install_append_keystone () { fi } -do_deploy_append_keystone () { +do_deploy:append_keystone () { if [ -n "${UBOOT_CONFIG}" ] then for config in ${UBOOT_MACHINE}; do
@@ -391,12 +391,12 @@ do_deploy_append_keystone () { # j7200 uses combined image for tiboot3.bin that includes u-boot-spl.bin and sysfw # along with board PM/RM configs generated by k3-image-gen and comes from ti-sci-fw # hence move the legacy u-boot's tiboot3.bin and u-boot-spl.bin out of the way -do_deploy_append_j7200-evm-k3r5 () { +do_deploy:append_j7200-evm-k3r5 () { mv ${DEPLOYDIR}/tiboot3.bin ${DEPLOYDIR}/tiboot3-r5spl.bin || true mv ${DEPLOYDIR}/u-boot-spl.bin ${DEPLOYDIR}/u-boot-spl-r5spl.bin || true } -do_deploy_append_am64xx-evm-k3r5 () { +do_deploy:append_am64xx-evm-k3r5 () { mv ${DEPLOYDIR}/tiboot3.bin ${DEPLOYDIR}/tiboot3-r5spl.bin || true mv ${DEPLOYDIR}/u-boot-spl.bin ${DEPLOYDIR}/u-boot-spl-r5spl.bin || true }
recipes-bsp/uart-lld/uart-lld-rtos_git.bb +7 -7
@@ -15,16 +15,16 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " edma3-lld-rtos \ +DEPENDS:append = " edma3-lld-rtos \ osal-rtos \ " -DEPENDS_append_ti33x = " starterware-rtos \ +DEPENDS:append_ti33x = " starterware-rtos \ pruss-lld-rtos \ " -DEPENDS_append_ti43x = " starterware-rtos" +DEPENDS:append_ti43x = " starterware-rtos" -DEPENDS_remove_k3 = "edma3-lld-rtos " -DEPENDS_append_k3 = " udma-lld-rtos " +DEPENDS:remove_k3 = "edma3-lld-rtos " +DEPENDS:append_k3 = " udma-lld-rtos " # Build with make instead of XDC TI_PDK_XDCMAKE = "0"
@@ -33,9 +33,9 @@ export PDK_UART_ROOT_PATH ="${WORKDIR}/build" export DEST_ROOT="${S}" export EDMA3LLD_BIOS6_INSTALLDIR = "${EDMA3_LLD_INSTALL_DIR}" -XDCPATH_append = ";${EDMA3_LLD_INSTALL_DIR}/packages" +XDCPATH:append = ";${EDMA3_LLD_INSTALL_DIR}/packages" # HTML doc link params PDK_COMP_LINK_TEXT = "UART LLD" -INSANE_SKIP_${PN} = "arch" +INSANE_SKIP:${PN} = "arch"
recipes-bsp/udma-lld/udma-lld-rtos_git.bb +3 -3
@@ -15,7 +15,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r1" -DEPENDS_append = " osal-rtos \ +DEPENDS:append = " osal-rtos \ sciclient-rtos \ "
@@ -60,6 +60,6 @@ do_install() { find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/udma \; } -FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" +FILES:${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages" -INSANE_SKIP_${PN} = "arch ldflags" +INSANE_SKIP:${PN} = "arch ldflags"
recipes-bsp/uio-module-drv/uio-module-drv-test_git.bb +6 -6
@@ -12,7 +12,7 @@ DEVICE_NAME_ti33x = "am33xx" DEVICE_NAME_ti43x = "am43xx" DEVICE_NAME_keystone = "keystone" DEVICE_NAME_k2g = "k2g" -RDEPENDS_${PN} = "uio-module-drv" +RDEPENDS:${PN} = "uio-module-drv" do_compile() { oe_runmake -C ${S} test "DEVICE=${DEVICE_NAME}"
@@ -24,22 +24,22 @@ do_install() { install -c -m 755 ${S}/test/uio_int_test ${D}${bindir}/. } -do_install_append_keystone () { +do_install:append_keystone () { install -c -m 755 ${S}/test/uio_cic2_int_multithread_test ${D}${bindir}/. } -do_install_append_k2g () { +do_install:append_k2g () { install -c -m 755 ${S}/test/prussdrv_test/test/pruss_uio_test ${D}${bindir}/. } -do_install_append_omap-a15 () { +do_install:append_omap-a15 () { install -c -m 755 ${S}/test/prussdrv_test/test/pruss_uio_test ${D}${bindir}/. } -do_install_append_ti33x () { +do_install:append_ti33x () { install -c -m 755 ${S}/test/prussdrv_test/test/pruss_uio_test ${D}${bindir}/. } -do_install_append_ti43x () { +do_install:append_ti43x () { install -c -m 755 ${S}/test/prussdrv_test/test/pruss_uio_test ${D}${bindir}/. }
recipes-bsp/uio-module-drv/uio-module-drv_git.bb +3 -3
@@ -2,19 +2,19 @@ DESCRIPTION = "User space IO (UIO) driver for on-chip modules" include uio-module-drv.inc -FILESEXTRAPATHS_prepend:= "${THISDIR}/${PN}:" +FILESEXTRAPATHS:prepend:= "${THISDIR}/${PN}:" SRC_URI += "file://0001-uio-module-drv-Replace-ioremap_nocache-with-ioremap.patch" # This package builds a kernel module, use kernel PR as base and append a local -MACHINE_KERNEL_PR_append = "d" +MACHINE_KERNEL_PR:append = "d" PR = "${MACHINE_KERNEL_PR}" module_auto_load_uio-module-drv = "uio-module-drv" inherit module -do_install_append () { +do_install:append () { install -d ${D}${includedir} cp *.h ${D}${includedir} }
recipes-bsp/usb-lld/usb-lld-rtos_git.bb +4 -4
@@ -14,10 +14,10 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" PR = "r0" -DEPENDS_append = " osal-rtos" -DEPENDS_append_ti33x = " starterware-rtos" -DEPENDS_append_ti43x = " starterware-rtos" -DEPENDS_append_k3 = " sciclient-rtos" +DEPENDS:append = " osal-rtos" +DEPENDS:append_ti33x = " starterware-rtos" +DEPENDS:append_ti43x = " starterware-rtos" +DEPENDS:append_k3 = " sciclient-rtos" # Build with make instead of XDC TI_PDK_XDCMAKE = "0"
recipes-bsp/vis-fw/vis_01.50.07.15.bb +4 -4
@@ -25,12 +25,12 @@ do_install() { } PACKAGES += "${PN}-fw" -RDEPENDS_${PN} += "${PN}-fw" +RDEPENDS:${PN} += "${PN}-fw" -FILES_${PN}-fw += "${base_libdir}/firmware/${DSPAPP}" +FILES:${PN}-fw += "${base_libdir}/firmware/${DSPAPP}" -INSANE_SKIP_${PN} = "ldflags" -INSANE_SKIP_${PN}-fw = "arch" +INSANE_SKIP:${PN} = "ldflags" +INSANE_SKIP:${PN}-fw = "arch" INHIBIT_PACKAGE_DEBUG_SPLIT = "1" INHIBIT_PACKAGE_STRIP = "1" INHIBIT_SYSROOT_STRIP = "1"
recipes-bsp/vpdma-fw/vpdma-fw_03-2012.bb +1 -1
@@ -20,6 +20,6 @@ do_install() { cp ${S}/${TARGET} ${D}${base_libdir}/firmware/${TARGET} } -FILES_${PN} += "${base_libdir}/firmware/${TARGET}" +FILES:${PN} += "${base_libdir}/firmware/${TARGET}" PR = "r1"
recipes-bsp/vps-lld/vps-lld-rtos_git.bb +3 -3
@@ -26,7 +26,7 @@ PR = "r0" S = "${WORKDIR}/${VPS_LLD_GIT_DESTSUFFIX}" # Add to DEPENDS set in ti-pdk.bbclass -DEPENDS_append = " \ +DEPENDS:append = " \ ti-sysbios \ osal-rtos \ edma3-lld-rtos \
@@ -44,7 +44,7 @@ TI_PDK_XDCMAKE = "0" # The makefile will push these on the XDCPATH export EDMA3LLD_BIOS6_INSTALLDIR = "${EDMA3_LLD_INSTALL_DIR}" -do_compile_append() { +do_compile:append() { # Delete archive created by XDC release command since it does not contain all content find -name "*.tar" -exec rm -f {} \;
@@ -53,4 +53,4 @@ do_compile_append() { tar -cf pm_lld.tar --exclude='*.tar' ./* } -INSANE_SKIP_${PN} = "arch ldflags" +INSANE_SKIP:${PN} = "arch ldflags"
recipes-bsp/wl18xx-fw/wl18xx-fw_8.9.0.0.86.bb +1 -1
@@ -22,4 +22,4 @@ do_install() { oe_runmake 'DEST_DIR=${D}' install } -FILES_${PN} = "/lib/firmware/ti-connectivity/*" +FILES:${PN} = "/lib/firmware/ti-connectivity/*"
recipes-bsp/x-load/x-load.inc +1 -1
@@ -34,7 +34,7 @@ do_install () { ln -sf ${MLO_IMAGE} ${D}/boot/${MLO_SYMLINK_NOMACHINE} } -FILES_${PN} = "/boot" +FILES:${PN} = "/boot" inherit deploy
recipes-bsp/x-load/x-load_1.46-psp.bb +2 -2
@@ -11,7 +11,7 @@ PR ="r0" PE = "1" # TI PSP v1.46_OMAPPSP_03.00.01.06 (Tag is one commit different) -SRCREV_pn-${PN} = "fc6d5be15c703d21aef0ae0b8c02177721f0445f" +SRCREV:pn-${PN} = "fc6d5be15c703d21aef0ae0b8c02177721f0445f" SRC_URI = "git://arago-project.org/git/projects/x-load-omap3.git;protocol=git" S = "${WORKDIR}/git"
@@ -33,6 +33,6 @@ do_install () { ln -sf ${MLO_IMAGE} ${D}/boot/${MLO_SYMLINK_NOMACHINE} } -FILES_${PN} = "/boot" +FILES:${PN} = "/boot" PACKAGE_ARCH = "${MACHINE_ARCH}"
recipes-bsp/x-load/x-load_git.bb +1 -1
@@ -6,7 +6,7 @@ PV = "1.5.1" PR ="r3" PE = "1" -SRCREV_pn-${PN} = "c4289f1bee035dea41536c5ba5e1bc36c7d493c4" +SRCREV:pn-${PN} = "c4289f1bee035dea41536c5ba5e1bc36c7d493c4" SRC_URI = "git://gitorious.org/x-loader/x-loader.git;branch=master;protocol=git \ "
recipes-connectivity/wl18xx-calibrator/wl18xx-calibrator_8.7.3.bb +1 -1
@@ -3,7 +3,7 @@ LICENSE = "BSD" LIC_FILES_CHKSUM = "file://COPYING;md5=4725015cb0be7be389cf06deeae3683d" DEPENDS = "libnl" -RDEPENDS_${PN} = "wl18xx-fw" +RDEPENDS:${PN} = "wl18xx-fw" #Tag: R8.7_SP3 (8.7.3) SRCREV = "5048b59a444ac59ba7171d6e122d5a84581aebf2"
recipes-connectivity/wl18xx-target-scripts/wl18xx-target-scripts_8.7.3.bb +1 -1
@@ -13,7 +13,7 @@ PR = "r1" S = "${WORKDIR}/git" -FILES_${PN} += "${datadir}/wl18xx/" +FILES:${PN} += "${datadir}/wl18xx/" do_install() { install -d ${D}${datadir}/wl18xx/
recipes-connectivity/wlconf/wlconf_8.7.3.bb +2 -2
@@ -30,10 +30,10 @@ do_install() { ${D}${sbindir}/wlconf/official_inis/ } -FILES_${PN} += " \ +FILES:${PN} += " \ ${sbindir}/wlconf \ ${sbindir}/wlconf/official_inis \ /lib/firmware/ti-connectivity/wl18xx-conf.bin \ " -FILES_${PN}-dbg += "${sbindir}/wlconf/.debug" +FILES:${PN}-dbg += "${sbindir}/wlconf/.debug"
recipes-core/init-ifupdown/init-ifupdown_1.0.bbappend +1 -1
@@ -1 +1 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-${PV}:"
recipes-core/udev/eudev_%.bbappend +4 -4
@@ -1,13 +1,13 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:" -SRC_URI_append_ti-soc = " \ +SRC_URI:append_ti-soc = " \ file://omap-tty.rules \ file://firmware.rules \ " -PR_append_ti-soc = ".3" +PR:append_ti-soc = ".3" -do_install_append_ti-soc() { +do_install:append_ti-soc() { install -m 0644 ${WORKDIR}/omap-tty.rules ${D}${sysconfdir}/udev/rules.d/ install -m 0644 ${WORKDIR}/firmware.rules ${D}${sysconfdir}/udev/rules.d/ }
recipes-devtools/gdbc6x/gdbc6x_git.bb +2 -2
@@ -9,7 +9,7 @@ COMPATIBLE_MACHINE = "dra7xx|keystone" PR = "${INC_PR}.1" -SRC_URI_append = " \ +SRC_URI:append = " \ file://init \ file://0001-libbfd.h-suppress-GCC9-Wstringop-truncation.patch;striplevel=2 \ "
@@ -39,7 +39,7 @@ do_install () { install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/gdbserverproxy } -RDEPENDS_${PN} = "gdbserverproxy-module-drv bash" +RDEPENDS:${PN} = "gdbserverproxy-module-drv bash" include gdbc6x.inc
recipes-devtools/gdbc6x/gdbserver-c6x_git.bb +2 -2
@@ -37,7 +37,7 @@ do_install() { COMPATIBLE_MACHINE = "dra7xx|keystone" PACKAGE_ARCH = "${MACHINE_ARCH}" -FILES_${PN}-dev += "\ +FILES:${PN}-dev += "\ ${datadir}/ti/gdbc6x \ "
@@ -45,6 +45,6 @@ include gdbc6x.inc require recipes-ti/includes/ti-paths.inc -ALLOW_EMPTY_${PN} = "1" +ALLOW_EMPTY:${PN} = "1" PARALLEL_MAKE = ""
recipes-devtools/gdbc6x/gdbserverproxy-module-drv_git.bb +2 -2
@@ -3,9 +3,9 @@ LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING.txt;md5=75859989545e37968a99b631ef42722e" # This package builds a kernel module, use kernel PR as base and append a local -MACHINE_KERNEL_PR_append = "b" +MACHINE_KERNEL_PR:append = "b" PR = "${MACHINE_KERNEL_PR}" -PV_append = "+git${SRCPV}" +PV:append = "+git${SRCPV}" S = "${WORKDIR}/git/kernel_module/gdbproxy-mod"
recipes-graphics/libgal/ti-gc320-libs_5.0.11.p7.bb +2 -2
@@ -16,7 +16,7 @@ BRANCH = "ti-${PV}" SRC_URI = "git://git.ti.com/graphics/ti-gc320-libs.git;protocol=git;branch=${BRANCH}" SRCREV = "c0afab259de59909cfe74c01f3f7fbaa147f94b5" -RRECOMMENDS_${PN} = "ti-gc320-driver" +RRECOMMENDS:${PN} = "ti-gc320-driver" # There's only hardfp version available python __anonymous() {
@@ -43,4 +43,4 @@ do_install() { chown -R root:root ${D} } -INSANE_SKIP_${PN} += "ldflags" +INSANE_SKIP:${PN} += "ldflags"
recipes-graphics/libgles/ti-img-rogue-umlibs_1.13.5776728.bb +19 -19
@@ -30,22 +30,22 @@ inherit update-rc.d PROVIDES += "virtual/egl virtual/libgles1 virtual/libgles2 virtual/libgbm" DEPENDS += "libdrm wayland expat" -RDEPENDS_${PN} += "bash" -RDEPENDS_${PN} += "wayland expat" +RDEPENDS:${PN} += "bash" +RDEPENDS:${PN} += "wayland expat" -RPROVIDES_${PN} = "libegl libgles1 libgles2 libgbm" -RPROVIDES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" -RPROVIDES_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg" +RPROVIDES:${PN} = "libegl libgles1 libgles2 libgbm" +RPROVIDES:${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" +RPROVIDES:${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg" -RREPLACES_${PN} = "libegl libgles1 liblges2 libgbm" -RREPLACES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" -RREPLACES_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg" +RREPLACES:${PN} = "libegl libgles1 liblges2 libgbm" +RREPLACES:${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" +RREPLACES:${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg" -RCONFLICTS_${PN} = "libegl libgles1 libgles2 libgbm" -RCONFLICTS_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" -RCONFLICTS_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg" +RCONFLICTS:${PN} = "libegl libgles1 libgles2 libgbm" +RCONFLICTS:${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" +RCONFLICTS:${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg" -RRECOMMENDS_${PN} += "ti-img-rogue-driver" +RRECOMMENDS:${PN} += "ti-img-rogue-driver" S = "${WORKDIR}/git"
@@ -54,16 +54,16 @@ do_install () { chown -R root:root ${D} } -FILES_${PN} += " ${base_libdir}/firmware/" -FILES_${PN} += " ${datadir}/" +FILES:${PN} += " ${base_libdir}/firmware/" +FILES:${PN} += " ${datadir}/" PACKAGES =+ "${PN}-plugins" -FILES_${PN}-plugins = "${libdir}/libGLESv2.so ${libdir}/libGLESv1_CM.so ${libdir}/libEGL.so ${libdir}/dri/pvr_dri.so" -RDEPENDS_${PN} += "${PN}-plugins" +FILES:${PN}-plugins = "${libdir}/libGLESv2.so ${libdir}/libGLESv1_CM.so ${libdir}/libEGL.so ${libdir}/dri/pvr_dri.so" +RDEPENDS:${PN} += "${PN}-plugins" -ALLOW_EMPTY_${PN}-plugins = "1" +ALLOW_EMPTY:${PN}-plugins = "1" -INSANE_SKIP_${PN} += "ldflags arch already-stripped" -INSANE_SKIP_${PN}-plugins = "dev-so" +INSANE_SKIP:${PN} += "ldflags arch already-stripped" +INSANE_SKIP:${PN}-plugins = "dev-so" CLEANBROKEN = "1"
recipes-graphics/libgles/ti-sgx-ddk-um_1.17.4948957.bb +18 -18
@@ -32,24 +32,24 @@ inherit update-rc.d PROVIDES += "virtual/egl virtual/libgles1 virtual/libgles2 virtual/libgbm" DEPENDS += "libdrm udev wayland wayland-protocols libffi expat" -RDEPENDS_${PN} += "libdrm libdrm-omap udev wayland wayland-protocols libffi expat" +RDEPENDS:${PN} += "libdrm libdrm-omap udev wayland wayland-protocols libffi expat" -RPROVIDES_${PN} = "libegl libgles1 libgles2 libgbm" -RPROVIDES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" -RPROVIDES_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg libgbm-dbg" +RPROVIDES:${PN} = "libegl libgles1 libgles2 libgbm" +RPROVIDES:${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" +RPROVIDES:${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg libgbm-dbg" -RREPLACES_${PN} = "libegl libgles1 libgles2 libgbm" -RREPLACES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" -RREPLACES_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg libgbm-dbg" +RREPLACES:${PN} = "libegl libgles1 libgles2 libgbm" +RREPLACES:${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" +RREPLACES:${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg libgbm-dbg" -RCONFLICTS_${PN} = "libegl libgles1 libgles2 libgbm" -RCONFLICTS_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" -RCONFLICTS_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg libgbm-dbg" +RCONFLICTS:${PN} = "libegl libgles1 libgles2 libgbm" +RCONFLICTS:${PN}-dev = "libegl-dev libgles1-dev libgles2-dev libgbm-dev" +RCONFLICTS:${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg libgbm-dbg" # The actual SONAME is libGLESv2.so.2, so need to explicitly specify RPROVIDES for .so.1 here -RPROVIDES_${PN} += "libGLESv2.so.1" +RPROVIDES:${PN} += "libGLESv2.so.1" -RRECOMMENDS_${PN} += "ti-sgx-ddk-km" +RRECOMMENDS:${PN} += "ti-sgx-ddk-km" S = "${WORKDIR}/git"
@@ -60,12 +60,12 @@ do_install () { chown -R root:root ${D} } -FILES_${PN} = "${bindir}/*" -FILES_${PN} += " ${libdir}/*" -FILES_${PN} += "${includedir}/*" -FILES_${PN} += "${sysconfdir}/*" +FILES:${PN} = "${bindir}/*" +FILES:${PN} += " ${libdir}/*" +FILES:${PN} += "${includedir}/*" +FILES:${PN} += "${sysconfdir}/*" -INSANE_SKIP_${PN} += "dev-so ldflags useless-rpaths" -INSANE_SKIP_${PN} += "already-stripped dev-deps" +INSANE_SKIP:${PN} += "dev-so ldflags useless-rpaths" +INSANE_SKIP:${PN} += "already-stripped dev-deps" CLEANBROKEN = "1"
recipes-kernel/kselftests/kselftests_4.10.bb +61 -61
144 lines not on this page · raw message
recipes-kernel/linux/bundle-devicetree.inc +1 -1
@@ -2,7 +2,7 @@ # zImage. The factory u-boot on lego-ev3 EEPROM only supports uImage, so we # append the DTB to the final uImage here. -do_deploy_append() { +do_deploy:append() { if [ "${KERNEL_DEVICETREE_BUNDLE}" = "1" ]; then install -d ${DEPLOYDIR} for dtbf in ${KERNEL_DEVICETREE}; do
recipes-kernel/linux/kernel-rdepends.inc +20 -20
@@ -1,41 +1,41 @@ # Pull in the devicetree files into the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree" # Add run-time dependency for PM firmware to the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_ti33x = " amx3-cm3" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_ti43x = " amx3-cm3" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_ti33x = " amx3-cm3" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_ti43x = " amx3-cm3" # Add run-time dependency for VPE VPDMA firmware to the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_dra7xx = " vpdma-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_dra7xx = " vpdma-fw" # Add run-time dependency for Goodix firmware to the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_dra7xx = " goodix-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_dra7xx = " goodix-fw" # Install boot-monitor skern file into /boot dir of rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_keystone = " boot-monitor" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_keystone = " boot-monitor" # Install ti-sci-fw into /boot dir of rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_k2g = " ti-sci-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_k2g = " ti-sci-fw" # Add run-time dependency for SerDes firmware to the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_keystone = " serdes-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_keystone = " serdes-fw" # Add run-time dependency for QMSS PDSP firmware to the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_keystone = " qmss-pdsp-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_keystone = " qmss-pdsp-fw" # Add run-time dependency for NETCP PA firmware to the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_k2hk = " netcp-pa-fw" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_k2e = " netcp-pa-fw" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_k2l = " netcp-pa-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_k2hk = " netcp-pa-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_k2e = " netcp-pa-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_k2l = " netcp-pa-fw" # Add run-time dependency for PRU Ethernet firmware to the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_am57xx-evm = " prueth-fw prusw-fw pruhsr-fw pruprp-fw" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_am57xx-hs-evm = " prueth-fw prusw-fw pruhsr-fw pruprp-fw" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_ti43x = " prueth-fw pruhsr-fw pruprp-fw" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_ti33x = " prueth-fw pruhsr-fw pruprp-fw" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_am65xx = " prueth-fw-am65x" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_am65xx-evm = " prueth-fw-am65x-sr2" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_am64xx-evm = " prueth-fw-am65x-sr2" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_am57xx-evm = " prueth-fw prusw-fw pruhsr-fw pruprp-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_am57xx-hs-evm = " prueth-fw prusw-fw pruhsr-fw pruprp-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_ti43x = " prueth-fw pruhsr-fw pruprp-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_ti33x = " prueth-fw pruhsr-fw pruprp-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_am65xx = " prueth-fw-am65x" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_am65xx-evm = " prueth-fw-am65x-sr2" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_am64xx-evm = " prueth-fw-am65x-sr2" # Add run-time dependency for Cadence MHDP firmware to the rootfs -RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j7 = " cadence-mhdp-fw" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append_j7 = " cadence-mhdp-fw"
recipes-kernel/linux/linux-ti-mainline_git.bb +6 -6
@@ -25,7 +25,7 @@ SRCREV = "62fb9874f5da54fdb243003b386128037319b219" PV = "5.13+git${SRCPV}" # Append to the MACHINE_KERNEL_PR so that a new SRCREV will cause a rebuild -MACHINE_KERNEL_PR_append = "b" +MACHINE_KERNEL_PR:append = "b" PR = "${MACHINE_KERNEL_PR}" KERNEL_GIT_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
@@ -41,12 +41,12 @@ SRCREV_FORMAT = "linux" KERNEL_DEVICETREE = "" -kernel_do_compile_append() { +kernel_do_compile:append() { oe_runmake dtbs CC="${KERNEL_CC} $cc_extra " LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS} oe_runmake -C ${WORKDIR}/ti-upstream-tools LINUX=${S} DTC=${B}/scripts/dtc/dtc O=${B} CC="${KERNEL_CC} $cc_extra " LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS} } -do_install_append() { +do_install:append() { for dtbf in `find arch/${ARCH}/boot/dts/ \( -name '*.dtb' -or -name '*.dtbo' \)`; do dtb="$dtbf" dtb_ext=${dtb##*.}
@@ -56,7 +56,7 @@ do_install_append() { done } -do_deploy_append() { +do_deploy:append() { for dtbf in `find arch/${ARCH}/boot/dts/ \( -name '*.dtb' -or -name '*.dtbo' \) -printf '%P\n'`; do dtb="$dtbf" dtb_ext=${dtb##*.}
@@ -67,9 +67,9 @@ do_deploy_append() { done } -do_shared_workdir_prepend() { +do_shared_workdir:prepend() { cd ${B} echo >> Module.symvers } -FILES_${KERNEL_PACKAGE_NAME}-devicetree += "/${KERNEL_IMAGEDEST}/*.itb" +FILES:${KERNEL_PACKAGE_NAME}-devicetree += "/${KERNEL_IMAGEDEST}/*.itb"
recipes-kernel/linux/linux-ti-staging-rt_5.10.bb +1 -1
@@ -2,7 +2,7 @@ require linux-ti-staging_5.10.bb # Look in the generic major.minor directory for files # This will have priority over generic non-rt path -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-5.10:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-5.10:" BRANCH = "ti-rt-linux-5.10.y"
recipes-kernel/linux/linux-ti-staging-rt_5.4.bb +1 -1
@@ -2,7 +2,7 @@ require linux-ti-staging_5.4.bb # Look in the generic major.minor directory for files # This will have priority over generic non-rt path -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-5.4:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-5.4:" BRANCH = "ti-rt-linux-5.4.y"
recipes-kernel/linux/linux-ti-staging-systest_5.10.bb +1 -1
@@ -2,4 +2,4 @@ require linux-ti-staging_5.10.bb # Look in the generic major.minor directory for files # This will have priority over generic non-rt path -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-5.10:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-5.10:"
recipes-kernel/linux/linux-ti-staging-systest_5.4.bb +1 -1
@@ -2,4 +2,4 @@ require linux-ti-staging_5.4.bb # Look in the generic major.minor directory for files # This will have priority over generic non-rt path -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-5.4:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-5.4:"
recipes-kernel/linux/linux-ti-staging_5.10.bb +4 -4
@@ -14,7 +14,7 @@ require recipes-kernel/linux/kernel-rdepends.inc require recipes-kernel/linux/ti-kernel.inc # Look in the generic major.minor directory for files -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-5.10:" +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-5.10:" KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT} \ ${EXTRA_DTC_ARGS}"
@@ -27,7 +27,7 @@ SRCREV = "4c2eade9f722838b0e457650368cba1c6c7483c2" PV = "5.10.41+git${SRCPV}" # Append to the MACHINE_KERNEL_PR so that a new SRCREV will cause a rebuild -MACHINE_KERNEL_PR_append = "b" +MACHINE_KERNEL_PR:append = "b" PR = "${MACHINE_KERNEL_PR}" KERNEL_GIT_URI = "git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
@@ -35,11 +35,11 @@ KERNEL_GIT_PROTOCOL = "git" SRC_URI += "${KERNEL_GIT_URI};protocol=${KERNEL_GIT_PROTOCOL};branch=${BRANCH} \ file://defconfig" -FILES_${KERNEL_PACKAGE_NAME}-devicetree += "/${KERNEL_IMAGEDEST}/*.itb" +FILES:${KERNEL_PACKAGE_NAME}-devicetree += "/${KERNEL_IMAGEDEST}/*.itb" # Special configuration for remoteproc/rpmsg IPC modules module_conf_rpmsg_client_sample = "blacklist rpmsg_client_sample" module_conf_ti_k3_r5_remoteproc = "softdep ti_k3_r5_remoteproc pre: virtio_rpmsg_bus" module_conf_ti_k3_dsp_remoteproc = "softdep ti_k3_dsp_remoteproc pre: virtio_rpmsg_bus"
Lines of this file are not shown. View the raw message.
recipes-kernel/linux/linux-ti-staging_5.4.bb +4 -4
Lines of this file are not shown. View the raw message.
recipes-security/optee/optee-os_%.bbappend +11 -11
Lines of this file are not shown. View the raw message.
recipes-ti/beagleboard/beaglebone-capes.bb +1 -1
Lines of this file are not shown. View the raw message.
recipes-ti/beagleboard/beaglebone-getting-started.bb +2 -2
Lines of this file are not shown. View the raw message.
recipes-ti/bios/ti-biosutils_1.02.02.bb +1 -1
Lines of this file are not shown. View the raw message.
recipes-ti/codec-engine/ti-codec-engine_3.24.00.08.bb +2 -2
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/gcc-arm-baremetal_7-2018-q2-update.bb +3 -3
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/gcc-linaro-baremetal-aarch64-native.bb +4 -4
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/gcc-linaro-baremetal-native.bb +4 -4
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/ti-cg-xml_2.61.00.bb +2 -2
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/ti-cgt-arm_18.12.5.bb +4 -4
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/ti-cgt-pru_2.3.2.bb +8 -8
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/ti-cgt6x-7_7.4.16.bb +3 -3
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/ti-cgt6x_8.3.2.bb +11 -11
Lines of this file are not shown. View the raw message.
recipes-ti/devtools/ti-xdctools-common.inc +4 -4
Lines of this file are not shown. View the raw message.
recipes-ti/framework-components/ti-framework-components.inc +3 -3
Lines of this file are not shown. View the raw message.
recipes-ti/ipc/ipc-transport-common-rtos_git.bb +1 -1
Lines of this file are not shown. View the raw message.
recipes-ti/ipc/ipc-transport-qmss-rtos_git.bb +2 -2
Lines of this file are not shown. View the raw message.
recipes-ti/ipc/ipc-transport-srio-rtos_git.bb +2 -2
Lines of this file are not shown. View the raw message.
recipes-ti/ipc/ti-ipc-examples-linux_git.bb +3 -3
Lines of this file are not shown. View the raw message.
recipes-ti/linuxutils/ti-linuxutils.inc +7 -7
Lines of this file are not shown. View the raw message.
recipes-ti/linuxutils/ti-linuxutils_2.26.01.02.bb +1 -1
Lines of this file are not shown. View the raw message.
recipes-ti/mpm-transport/mpm-transport_git.bb +6 -6
Lines of this file are not shown. View the raw message.
recipes-ti/multiprocmgr/multiprocmgr-rtos_git.bb +6 -6
Lines of this file are not shown. View the raw message.
recipes-ti/multiprocmgr/multiprocmgr-test_git.bb +5 -5
Lines of this file are not shown. View the raw message.
recipes-ti/multiprocmgr/multiprocmgr_git.bb +2 -2
Lines of this file are not shown. View the raw message.
recipes-ti/openmp-rtos/openmp-rtos_git.bb +6 -6
Lines of this file are not shown. View the raw message.
recipes-ti/ti-pdk-build/ti-pdk-build-rtos_git.bb +2 -2
Lines of this file are not shown. View the raw message.
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb +9 -9
Lines of this file are not shown. View the raw message.
recipes-ti/uio-test-pruss/uio-test-pruss_git.bb +4 -4
Lines of this file are not shown. View the raw message.
recipes-ti/xdais/ti-xdais_6.26.01.03.bb +1 -1
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.