Skip to contentSkip to conversation

drm/msm/disp/dpu1: add safe lut config in dpu driver

PATCH Superseded Kalyan Thota 2 participants 2 messages Aug 4, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 drm/msm/disp/dpu1: add safe lut config in dpu driver

Add safe lut configuration for all the targets in dpu driver as per QOS recommendation.

Issue reported on SC7280:

With wait-for-safe feature in smmu enabled, RT client buffer levels are checked to be safe before smmu invalidation. Since display was always set to unsafe it was delaying the invalidaiton process thus impacting the performance on NRT clients such as eMMC and NVMe.

Validated this change on SC7280, With this change eMMC performance has improved significantly.

Changes in v1:
- Add fixes tag (Sai)
- CC stable kernel (Dimtry)

Changes in v2:
- Correct fixes tag with appropriate hash (stephen)

Fixes 591e34a091d1 (drm/msm/disp/dpu1: add support for display

for SC7280 target)

---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +5 -0
index d01c4c9..2e482cd 100644
@@ -974,6 +974,7 @@ static const struct dpu_perf_cfg sdm845_perf_data = {
 	.amortizable_threshold = 25,
 	.min_prefill_lines = 24,
 	.danger_lut_tbl = {0xf, 0xffff, 0x0},
+	.safe_lut_tbl = {0xfff0, 0xf000, 0xffff},
 	.qos_lut_tbl = {
 		{.nentry = ARRAY_SIZE(sdm845_qos_linear),
 		.entries = sdm845_qos_linear
@@ -1001,6 +1002,7 @@ static const struct dpu_perf_cfg sc7180_perf_data = {
 	.min_dram_ib = 1600000,
 	.min_prefill_lines = 24,
 	.danger_lut_tbl = {0xff, 0xffff, 0x0},
+	.safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
 	.qos_lut_tbl = {
 		{.nentry = ARRAY_SIZE(sc7180_qos_linear),
 		.entries = sc7180_qos_linear
@@ -1028,6 +1030,7 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
 	.min_dram_ib = 800000,
 	.min_prefill_lines = 24,
 	.danger_lut_tbl = {0xf, 0xffff, 0x0},
+	.safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
 	.qos_lut_tbl = {
 		{.nentry = ARRAY_SIZE(sm8150_qos_linear),
 		.entries = sm8150_qos_linear
@@ -1056,6 +1059,7 @@ static const struct dpu_perf_cfg sm8250_perf_data = {
 	.min_dram_ib = 800000,
 	.min_prefill_lines = 35,
 	.danger_lut_tbl = {0xf, 0xffff, 0x0},
+	.safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
 	.qos_lut_tbl = {
 		{.nentry = ARRAY_SIZE(sc7180_qos_linear),
 		.entries = sc7180_qos_linear
@@ -1084,6 +1088,7 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
 	.min_dram_ib = 1600000,
 	.min_prefill_lines = 24,
 	.danger_lut_tbl = {0xffff, 0xffff, 0x0},
+	.safe_lut_tbl = {0xff00, 0xff00, 0xffff},
 	.qos_lut_tbl = {
 		{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
 		.entries = sc7180_qos_macrotile
Signature · 1 line
2.7.4
maintainer
#1 lore raw
Quoted 21 lines · Kalyan Thota

Add safe lut configuration for all the targets in dpu driver as per QOS recommendation.

Issue reported on SC7280:

With wait-for-safe feature in smmu enabled, RT client buffer levels are checked to be safe before smmu invalidation. Since display was always set to unsafe it was delaying the invalidaiton process thus impacting the performance on NRT clients such as eMMC and NVMe.

Validated this change on SC7280, With this change eMMC performance has improved significantly.

Changes in v1:
- Add fixes tag (Sai)
- CC stable kernel (Dimtry)

Changes in v2:
- Correct fixes tag with appropriate hash (stephen)

Quoted 7 lines
Fixes 591e34a091d1 (drm/msm/disp/dpu1: add support for display

for SC7280 target)

---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
 1 file changed, 5 insertions(+)

<formletter>

This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>