S390x: CPU Topology Information
cover S390x: CPU Topology Information
When facility 11 is available inside the S390x architecture, 2 new instructions are available: PTF and STSI with function code 15.
Let's check their availability in QEMU/KVM and their coherence with the CPU topology provided by the QEMU -smp parameter.
To run these tests successfully you will need the Linux and the QEMU patches:
https://lkml.org/lkml/2021/8/3/201 https://lists.nongnu.org/archive/html/qemu-s390x/2021-07/msg00165.html
Regards,
Pierre
Pierre Morel (4):
s390x: lib: Add SCLP toplogy nested level
s390x: lib: Move stsi_get_fc to library
s390x: topology: check the Perform Topology Function
s390x: Topology: checking Configuration Topology Information
lib/s390x/asm/arch_def.h | 16 +++ lib/s390x/sclp.c | 6 + lib/s390x/sclp.h | 4 +- s390x/Makefile | 1 + s390x/stsi.c | 16 --- s390x/topology.c | 294 +++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 4 + 7 files changed, 324 insertions(+), 17 deletions(-) create mode 100644 s390x/topology.c
Signature · 1 line
2.25.1
PATCH 1/4 s390x: lib: Add SCLP toplogy nested level
The maximum CPU Topology nested level is available with the SCLP READ_INFO command inside the byte at offset 15 of the ReadInfo structure.
Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
--- lib/s390x/sclp.c | 6 ++++++ lib/s390x/sclp.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)
lib/s390x/sclp.c +6 -0
@@ -123,6 +123,12 @@ int sclp_get_cpu_num(void)return read_info->entries_cpu; } +int sclp_get_stsi_parm (void ) +{ +assert (read_info); +return read_info->stsi_parm; +} +CPUEntry *sclp_get_cpu_entries (void ) {assert (read_info);
lib/s390x/sclp.h +3 -1
@@ -146,7 +146,8 @@ typedef struct ReadInfo {SCCBHeader h;uint16_t rnmax;uint8_t rnsize; -uint8_t _reserved1[16 -11 ];/* 11-15 */ +uint8_t _reserved1[15 -11 ];/* 11-14 */ +uint8_t stsi_parm;uint16_t entries_cpu;/* 16-17 */ uint16_t offset_cpu;/* 18-19 */ uint8_t _reserved2[24 -20 ];/* 20-23 */
@@ -322,6 +323,7 @@ void sclp_console_setup(void);void sclp_print (const char *str);void sclp_read_info (void );int sclp_get_cpu_num (void ); +int sclp_get_stsi_parm (void );CPUEntry *sclp_get_cpu_entries (void );void sclp_facilities_setup (void );int sclp_service_call (unsigned int command,void *sccb);
Signature · 1 line
2.25.1
Re: [kvm-unit-tests PATCH v1 1/4] s390x: lib: Add SCLP toplogy nested level
Quoted 8 lines · On Mon, 9 Aug 2021 10:48:51 +0200 Pierre Morel <[email protected]> wrote:
The maximum CPU Topology nested level is available with the SCLP
READ_INFOcommand inside the byte at offset 15 of the ReadInfo structure.Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
Signed-off-by Pierre Morel <[email protected]>
Quoted 44 lines
--- lib/s390x/sclp.c | 6 ++++++ lib/s390x/sclp.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)lib/s390x/sclp.c +6
-0@@ -123,6 +123,12 @@ int sclp_get_cpu_num(void)return read_info->entries_cpu; } +int sclp_get_stsi_parm (void ) +{ +assert (read_info); +return read_info->stsi_parm; +} +CPUEntry *sclp_get_cpu_entries (void ) {assert (read_info);lib/s390x/sclp.h +3
-1@@ -146,7 +146,8 @@ typedef struct ReadInfo {SCCBHeader h;uint16_t rnmax;uint8_t rnsize; -uint8_t _reserved1[16 -11 ];/* 11-15 */ +uint8_t _reserved1[15 -11 ];/* 11-14 */ +uint8_t stsi_parm;uint16_t entries_cpu;/* 16-17 */ uint16_t offset_cpu;/* 18-19 */ uint8_t _reserved2[24 -20 ];/* 20-23 */ @@ -322,6 +323,7 @@ void sclp_console_setup(void);void sclp_print (const char *str);void sclp_read_info (void );int sclp_get_cpu_num (void ); +int sclp_get_stsi_parm (void );CPUEntry *sclp_get_cpu_entries (void );void sclp_facilities_setup (void );int sclp_service_call (unsigned int command,void *sccb);
Re: [kvm-unit-tests PATCH v1 1/4] s390x: lib: Add SCLP toplogy nested level
Quoted 7 lines · Claudio Imbrenda
Quoted 4 lines · On Mon, 9 Aug 2021 10:48:51 +0200 Pierre Morel <[email protected]> wrote:
The maximum CPU Topology nested level is available with the SCLP
READ_INFOcommand inside the byte at offset 15 of the ReadInfo structure.
Quoted 6 lines
Quoted 4 lines
Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>
Thanks,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH 2/4 s390x: lib: Move stsi_get_fc to library
In reply to Pierre MorelIt's needed in multiple tests now.
--- lib/s390x/asm/arch_def.h | 16 ++++++++++++++++ s390x/stsi.c | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-)
lib/s390x/asm/arch_def.h +16 -0
@@ -328,6 +328,22 @@ static inline int stsi(void *addr, int fc, int sel1, int sel2)return cc; } +static inline unsigned long stsi_get_fc (void *addr) +{ + register unsigned long r0 asm("0") = 0; + register unsigned long r1 asm("1") = 0; +int cc; + + asmvolatile ("stsi 0(%[addr])\n" +"ipm %[cc]\n" +"srl %[cc],28\n" + :"+d" (r0), [cc]"=d" (cc) + :"d" (r1), [addr]"a" (addr) + :"cc" ,"memory" ); +assert (!cc); +return r0 >>28 ; +} +static inline int servc (uint32_t command,unsigned long sccb) {int cc;
s390x/stsi.c +0 -16
@@ -71,22 +71,6 @@ static void test_priv(void)report_prefix_pop (); } -static inline unsigned long stsi_get_fc (void *addr) -{ - register unsigned long r0 asm("0") = 0; - register unsigned long r1 asm("1") = 0; -int cc; - - asmvolatile ("stsi 0(%[addr])\n" -"ipm %[cc]\n" -"srl %[cc],28\n" - :"+d" (r0), [cc]"=d" (cc) - :"d" (r1), [addr]"a" (addr) - :"cc" ,"memory" ); -assert (!cc); -return r0 >>28 ; -} -static void test_fc (void ) {report (stsi (pagebuf,7 ,0 ,0 ) ==3 ,"invalid fc" );
Signature · 1 line
2.25.1
Re: [kvm-unit-tests PATCH v1 2/4] s390x: lib: Move stsi_get_fc to library
Quoted 13 lines · Pierre Morel
It's needed in multiple tests now.
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 16 ++++++++++++++++ s390x/stsi.c | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-)lib/s390x/asm/arch_def.h +0
-0
lib/s390x/asm/arch_def.h static inline int stsi(void *addr, int fc, int sel1, int sel2) · line 331
Quoted 4 lines
lib/s390x/asm/arch_def.h +1
-0@@ -328,6 +328,22 @@ static inline int stsi(void *addr, int fc, int sel1, int sel2)return cc; } +static inline unsigned long stsi_get_fc (void *addr)
We don't need an address for fc == 0. You can remove that and fix the s390x/stsi.c call.
Quoted 46 lines
lib/s390x/asm/arch_def.h +15
-0+{ + register unsigned long r0 asm("0") = 0; + register unsigned long r1 asm("1") = 0; +int cc; + + asmvolatile ("stsi 0(%[addr])\n" +"ipm %[cc]\n" +"srl %[cc],28\n" + :"+d" (r0), [cc]"=d" (cc) + :"d" (r1), [addr]"a" (addr) + :"cc" ,"memory" ); +assert (!cc); +return r0 >>28 ; +} +static inline int servc (uint32_t command,unsigned long sccb) {int cc;s390x/stsi.c +0
-16@@ -71,22 +71,6 @@ static void test_priv(void)report_prefix_pop (); } -static inline unsigned long stsi_get_fc (void *addr) -{ - register unsigned long r0 asm("0") = 0; - register unsigned long r1 asm("1") = 0; -int cc; - - asmvolatile ("stsi 0(%[addr])\n" -"ipm %[cc]\n" -"srl %[cc],28\n" - :"+d" (r0), [cc]"=d" (cc) - :"d" (r1), [addr]"a" (addr) - :"cc" ,"memory" ); -assert (!cc); -return r0 >>28 ; -} -static void test_fc (void ) {report (stsi (pagebuf,7 ,0 ,0 ) ==3 ,"invalid fc" );
Re: [kvm-unit-tests PATCH v1 2/4] s390x: lib: Move stsi_get_fc to library
Quoted 17 lines · Janosch Frank
Quoted 16 lines · Pierre Morel
It's needed in multiple tests now.
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 16 ++++++++++++++++ s390x/stsi.c | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-)lib/s390x/asm/arch_def.h +0
-0@@ -328,6 +328,22 @@ static inline int stsi(void *addr, int fc, int sel1, int sel2)return cc; }
Quoted 4 lines
lib/s390x/asm/arch_def.h static inline int stsi(void *addr, int fc, int sel1, int sel2) · line 331
Quoted 1 line
lib/s390x/asm/arch_def.h +1
-0+static inline unsigned long stsi_get_fc (void *addr)We don't need an address for fc == 0. You can remove that and fix the
s390x/stsi.ccall.
OK, I do that.
Thanks,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v1 2/4] s390x: lib: Move stsi_get_fc to library
In reply to Pierre MorelQuoted 3 lines · On Mon, 9 Aug 2021 10:48:52 +0200 Pierre Morel <[email protected]> wrote:
It's needed in multiple tests now.
Signed-off-by Pierre Morel <[email protected]>
Quoted 59 lines
--- lib/s390x/asm/arch_def.h | 16 ++++++++++++++++ s390x/stsi.c | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-)lib/s390x/asm/arch_def.h +16
-0@@ -328,6 +328,22 @@ static inline int stsi(void *addr, int fc, int sel1, int sel2) return cc; } +static inline unsigned long stsi_get_fc (void *addr) +{ + register unsigned long r0 asm("0") = 0; + register unsigned long r1 asm("1") = 0; +int cc; + + asmvolatile ("stsi 0(%[addr])\n" +"ipm %[cc]\n" +"srl %[cc],28\n" + :"+d" (r0), [cc]"=d" (cc) + :"d" (r1), [addr]"a" (addr) + :"cc" ,"memory" ); +assert (!cc); +return r0 >>28 ; +} +static inline int servc (uint32_t command,unsigned long sccb) {int cc;s390x/stsi.c +0
-16@@ -71,22 +71,6 @@ static void test_priv(void)report_prefix_pop (); } -static inline unsigned long stsi_get_fc (void *addr) -{ - register unsigned long r0 asm("0") = 0; - register unsigned long r1 asm("1") = 0; -int cc; - - asmvolatile ("stsi 0(%[addr])\n" -"ipm %[cc]\n" -"srl %[cc],28\n" - :"+d" (r0), [cc]"=d" (cc) - :"d" (r1), [addr]"a" (addr) - :"cc" ,"memory" ); -assert (!cc); -return r0 >>28 ; -} -static void test_fc (void ) {report (stsi (pagebuf,7 ,0 ,0 ) ==3 ,"invalid fc" );
PATCH 3/4 s390x: topology: check the Perform Topology Function
In reply to Pierre MorelWe check the PTF instruction.
- We do not expect to support vertical polarization.
- We do not expect the Modified Topology Change Report to be pending or not at the moment the first PTF instruction with PTF_CHECK function code is done as some code already did run a polarization change may have occur.
--- s390x/Makefile | 1 + s390x/topology.c | 87 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ 3 files changed, 91 insertions(+) create mode 100644 s390x/topology.c
s390x/Makefile +1 -0
@@ -24,6 +24,7 @@ tests += $(TEST_DIR)/mvpg.elf tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf +tests += $(TEST_DIR)/topology.elf tests_binary = $(patsubst %.elf,%.bin,$(tests)) ifneq ($(HOST_KEY_DOCUMENT),)
s390x/topology.c new file +87 -0
87 lines not on this page · raw message
s390x/unittests.cfg +3 -0
@@ -109,3 +109,6 @@ file = edat.elf [mvpg-sie] file = mvpg-sie.elf + +[topology] +file = topology.elf
Signature · 1 line
2.25.1
Re: [kvm-unit-tests PATCH v1 3/4] s390x: topology: check the Perform Topology Function
Quoted 44 lines · Pierre Morel
We check the PTF instruction.
- We do not expect to support vertical polarization.
- We do not expect the Modified Topology Change Report to be pending or not at the moment the first PTF instruction with
PTF_CHECKfunction code is done as some code already did run a polarization change may have occur.Signed-off-by Pierre Morel <[email protected]>--- s390x/Makefile | 1 + s390x/topology.c | 87 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ 3 files changed, 91 insertions(+) create mode 100644 s390x/topology.cs390x/Makefile +1
-0@@ -24,6 +24,7 @@ tests += $(TEST_DIR)/mvpg.elf tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf +tests += $(TEST_DIR)/topology.elf tests_binary = $(patsubst %.elf,%.bin,$(tests)) ifneq ($(HOST_KEY_DOCUMENT),)s390x/topology.c new file +9
-0@@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* CPU Topology +* +* Copyright (c) 2021 IBM Corp +* +* Authors: +* Pierre Morel <[email protected]> +*/
s390x/topology.c line 19
Quoted 10 lines
s390x/topology.c new file +10
-0+ +#include <libcflat.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> +#include <asm/interrupt.h> +#include <asm/facility.h> +#include <smp.h> +#include <sclp.h> + +static uint8_t pagebuf[PAGE_SIZE * 2] __attribute__((aligned(PAGE_SIZE * 2)));
We don't actually need that I made a mistake in stsi_get_fc(). I'll comment in the other patch.
s390x/topology.c line 24
Quoted 5 lines
s390x/topology.c new file +5
-0+int machine_level; +int mnest; + +#define PTF_HORIZONTAL 0 +#define PTF_VERTICAL 1
PTF_REQ_*
Quoted 26 lines
s390x/topology.c new file +26
-0+#define PTF_CHECK 2> + +#define PTF_ERR_NO_REASON 0 +#define PTF_ERR_ALRDY_POLARIZED 1 +#define PTF_ERR_IN_PROGRESS 2 + +static int ptf (unsigned long fc,unsigned long *rc) +{ +int cc; + + asmvolatile ( +" .insn rre,0xb9a20000,%1,%1\n" +" ipm %0\n" +" srl %0,28\n" + :"=d" (cc),"+d" (fc) + :"d" (fc) + :"cc" ); + + *rc = fc >>8 ; +return cc; +} + +static void test_ptf (void ) +{ +unsigned long rc; +int cc; +
s390x/topology.c
Quoted 10 lines
s390x/topology.c new file +10
-0+report_prefix_push ("Topology Report pending" ); +/* +* At this moment the topology may already have changed +* since the VM has been started. +* However, we can test if a second PTF instruction +* reports that the topology did not change since the +* preceding PFT instruction. +*/ +ptf (PTF_CHECK , &rc); + cc =ptf (PTF_CHECK , &rc)> +report (cc ==0 ,"PTF check clear" );
Please leave a \n after a report for readability.
s390x/topology.c line 68
Quoted 6 lines
s390x/topology.c new file +6
-0+ cc =ptf (PTF_HORIZONTAL , &rc); +report (cc ==2 && rc ==PTF_ERR_ALRDY_POLARIZED , +"PTF horizontal already configured" ); + cc =ptf (PTF_VERTICAL , &rc); +report (cc ==2 && rc ==PTF_ERR_NO_REASON , +"PTF vertical non possible" );
I've yet to look into your KVM/qemu code so I don't really understand what you're testing here and why we can expect to get those results.
Maybe add a comment?
Also what will happen if we start this test under LPAR or z/VM, will it fail?
s390x/topology.c line 75
Quoted 7 lines
s390x/topology.c new file +7
-0+ +report_prefix_pop (); +} + +int main (int argc,char *argv[]) +{ +report_prefix_push ("stsi" );
Where did you copy that test from? :-)
s390x/topology.c line 85
Quoted 10 lines
s390x/topology.c new file +10
-0+ +if (!test_facility (11 )) { +report_skip ("Topology facility not present" ); + goto end; + } + +report_info ("Machine level %ld" ,stsi_get_fc (pagebuf)); + +test_ptf (); +end:
report_prefix_pop is missing here
Quoted 14 lines
s390x/topology.c new file +2
-0+return report_summary (); +}s390x/unittests.cfg +3
-0@@ -109,3 +109,6 @@ file = edat.elf [mvpg-sie] file = mvpg-sie.elf + +[topology] +file = topology.elf
Re: [kvm-unit-tests PATCH v1 3/4] s390x: topology: check the Perform Topology Function
Quoted 50 lines · Janosch Frank
Quoted 49 lines · Pierre Morel
We check the PTF instruction.
- We do not expect to support vertical polarization.
- We do not expect the Modified Topology Change Report to be pending or not at the moment the first PTF instruction with
PTF_CHECKfunction code is done as some code already did run a polarization change may have occur.Signed-off-by Pierre Morel <[email protected]>--- s390x/Makefile | 1 + s390x/topology.c | 87 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ 3 files changed, 91 insertions(+)create mode 100644
s390x/topology.cs390x/Makefile +1
-0@@ -24,6 +24,7 @@ tests += $(TEST_DIR)/mvpg.elf tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf +tests += $(TEST_DIR)/topology.elf tests_binary = $(patsubst %.elf,%.bin,$(tests)) ifneq ($(HOST_KEY_DOCUMENT),)s390x/topology.c new file +14
-0@@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* CPU Topology +* +* Copyright (c) 2021 IBM Corp +* +* Authors: +* Pierre Morel <[email protected]> +*/ + +#include <libcflat.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> +#include <asm/interrupt.h>
Quoted 8 lines
s390x/topology.c line 19
Quoted 5 lines
s390x/topology.c new file +5
-0+#include <asm/facility.h> +#include <smp.h> +#include <sclp.h> + +static uint8_t pagebuf[PAGE_SIZE * 2] __attribute__((aligned(PAGE_SIZE * 2)));We don't actually need that I made a mistake in
stsi_get_fc(). I'll comment in the other patch.
OK I saw.
thx
Quoted 8 lines
s390x/topology.c line 24
Quoted 6 lines
s390x/topology.c new file +5
-0+int machine_level; +int mnest; + +#define PTF_HORIZONTAL 0 +#define PTF_VERTICAL 1PTF_REQ_*
OK
Quoted 31 lines
Quoted 31 lines
s390x/topology.c new file +30
-0+#define PTF_CHECK 2> + +#define PTF_ERR_NO_REASON 0 +#define PTF_ERR_ALRDY_POLARIZED 1 +#define PTF_ERR_IN_PROGRESS 2 + +static int ptf (unsigned long fc,unsigned long *rc) +{ +int cc; + + asmvolatile ( +" .insn rre,0xb9a20000,%1,%1\n" +" ipm %0\n" +" srl %0,28\n" + :"=d" (cc),"+d" (fc) + :"d" (fc) + :"cc" ); + + *rc = fc >>8 ; +return cc; +} + +static void test_ptf (void ) +{ +unsigned long rc; +int cc; + +report_prefix_push ("Topology Report pending" ); +/* +* At this moment the topology may already have changed +* since the VM has been started.
Quoted 8 lines
s390x/topology.c
Quoted 6 lines
s390x/topology.c new file +6
-0+* However, we can test if a second PTF instruction +* reports that the topology did not change since the +* preceding PFT instruction. +*/ +ptf (PTF_CHECK , &rc); + cc =ptf (PTF_CHECK , &rc)> +report (cc ==0 ,"PTF check clear" );Please leave a \n after a report for readability.
OK
Quoted 10 lines
s390x/topology.c line 68
Quoted 7 lines
s390x/topology.c new file +6
-0+ cc =ptf (PTF_HORIZONTAL , &rc); +report (cc ==2 && rc ==PTF_ERR_ALRDY_POLARIZED , +"PTF horizontal already configured" ); + cc =ptf (PTF_VERTICAL , &rc); +report (cc ==2 && rc ==PTF_ERR_NO_REASON , +"PTF vertical non possible" );I've yet to look into your KVM/qemu code so I don't really understand what you're testing here and why we can expect to get those results.
In KVM please ignore the stupid patch 3 commented by Heiko and that will disappear.
It changes nothing to the first two patches.
OK, I will add some comments to explain what we await and why.
Quoted 4 lines
Maybe add a comment?
Also what will happen if we start this test under LPAR or z/VM, will it fail?
The last one may fail, PTF would succeed AFAIU under LPAR. For z/VM, no idea.
Quoted 10 lines
s390x/topology.c line 75
Quoted 8 lines
s390x/topology.c new file +7
-0+ +report_prefix_pop (); +} + +int main (int argc,char *argv[]) +{ +report_prefix_push ("stsi" );Where did you copy that test from? :-)
:) yes cut and paste, I will change trhe prefix to "CPU Topology"
Quoted 13 lines
s390x/topology.c line 85
Quoted 11 lines
s390x/topology.c new file +10
-0+ +if (!test_facility (11 )) { +report_skip ("Topology facility not present" ); + goto end; + } + +report_info ("Machine level %ld" ,stsi_get_fc (pagebuf)); + +test_ptf (); +end:
report_prefix_popis missing here
Right.
will add.
Quoted 9 lines
Quoted 9 lines
s390x/topology.c new file +2
-0+return report_summary (); +}s390x/unittests.cfg +0
-0@@ -109,3 +109,6 @@ file = edat.elf
Quoted 7 lines
s390x/unittests.cfg file = edat.elf · line 114
Quoted 6 lines
s390x/unittests.cfg +3
-0[mvpg-sie] file = mvpg-sie.elf + +[topology] +file = topology.elf
Thanks,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v1 3/4] s390x: topology: check the Perform Topology Function
In reply to Pierre MorelQuoted 61 lines · On Mon, 9 Aug 2021 10:48:53 +0200 Pierre Morel <[email protected]> wrote:
We check the PTF instruction.
- We do not expect to support vertical polarization.
- We do not expect the Modified Topology Change Report to be pending or not at the moment the first PTF instruction with
PTF_CHECKfunction code is done as some code already did run a polarization change may have occur.Signed-off-by Pierre Morel <[email protected]>--- s390x/Makefile | 1 + s390x/topology.c | 87 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ 3 files changed, 91 insertions(+) create mode 100644 s390x/topology.cs390x/Makefile +1
-0@@ -24,6 +24,7 @@ tests += $(TEST_DIR)/mvpg.elf tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf +tests += $(TEST_DIR)/topology.elf tests_binary = $(patsubst %.elf,%.bin,$(tests)) ifneq ($(HOST_KEY_DOCUMENT),)s390x/topology.c new file +19
-0@@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* CPU Topology +* +* Copyright (c) 2021 IBM Corp +* +* Authors: +* Pierre Morel <[email protected]> +*/ + +#include <libcflat.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> +#include <asm/interrupt.h> +#include <asm/facility.h> +#include <smp.h> +#include <sclp.h> + +static uint8_t pagebuf[PAGE_SIZE *2 ]
__attribute__((aligned(PAGE_SIZE * 2))); +intmachine_level;s390x/topology.c new file +6
-0+int mnest; + +#define PTF_HORIZONTAL 0 +#define PTF_VERTICAL 1 +#define PTF_CHECK 2 +
s390x/topology.c line 36
Quoted 10 lines
s390x/topology.c new file +10
-0+#define PTF_ERR_NO_REASON 0 +#define PTF_ERR_ALRDY_POLARIZED 1 +#define PTF_ERR_IN_PROGRESS 2 + +static int ptf (unsigned long fc,unsigned long *rc) +{ +int cc; + + asmvolatile ( + " .insn rre,0xb9a20000,%1,%1\n"
I know you copied this from the kernel, but the second argument is not really there according to the PoP, so maybe it's better to have this instead?
.insn rre,0xb9a20000,%1,0\n
Quoted 22 lines
s390x/topology.c new file +22
-0+ " ipm %0\n" + " srl %0,28\n" + : "=d" (cc), "+d" (fc) + : "d" (fc) + : "cc"); + + *rc = fc >>8 ; +return cc; +} + +static void test_ptf (void ) +{ +unsigned long rc; +int cc; + +report_prefix_push ("Topology Report pending" ); +/* +* At this moment the topology may already have changed +* since the VM has been started. +* However, we can test if a second PTF instruction +* reports that the topology did not change since the +* preceding PFT instruction.
s390x/topology.c line 68
Quoted 10 lines
s390x/topology.c new file +10
-0+*/ +ptf (PTF_CHECK , &rc); + cc =ptf (PTF_CHECK , &rc); +report (cc ==0 ,"PTF check clear" ); + cc =ptf (PTF_HORIZONTAL , &rc); +report (cc ==2 && rc ==PTF_ERR_ALRDY_POLARIZED , +"PTF horizontal already configured" ); + cc =ptf (PTF_VERTICAL , &rc); +report (cc ==2 && rc ==PTF_ERR_NO_REASON , +"PTF vertical non possible" );
*not possible
s390x/topology.c line 75
Quoted 7 lines
s390x/topology.c new file +7
-0+ +report_prefix_pop (); +} + +int main (int argc,char *argv[]) +{ +report_prefix_push ("stsi" );
should this really be "stsi" ?
Quoted 23 lines
s390x/topology.c new file +12
-0+ +if (!test_facility (11 )) { +report_skip ("Topology facility not present" ); + goto end; + } + +report_info ("Machine level %ld" ,stsi_get_fc (pagebuf)); + +test_ptf (); +end: +return report_summary (); +}s390x/unittests.cfg +3
-0@@ -109,3 +109,6 @@ file = edat.elf [mvpg-sie] file = mvpg-sie.elf + +[topology] +file = topology.elf
Re: [kvm-unit-tests PATCH v1 3/4] s390x: topology: check the Perform Topology Function
Quoted 79 lines · Claudio Imbrenda
Quoted 61 lines · On Mon, 9 Aug 2021 10:48:53 +0200 Pierre Morel <[email protected]> wrote:
We check the PTF instruction.
- We do not expect to support vertical polarization.
- We do not expect the Modified Topology Change Report to be pending or not at the moment the first PTF instruction with
PTF_CHECKfunction code is done as some code already did run a polarization change may have occur.Signed-off-by Pierre Morel <[email protected]>--- s390x/Makefile | 1 + s390x/topology.c | 87+++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ 3 files changed, 91 insertions(+)
create mode 100644s390x/topology.cs390x/Makefile +1
-0@@ -24,6 +24,7 @@ tests += $(TEST_DIR)/mvpg.elf tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf +tests += $(TEST_DIR)/topology.elf tests_binary = $(patsubst %.elf,%.bin,$(tests)) ifneq ($(HOST_KEY_DOCUMENT),)s390x/topology.c new file +19
-0@@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* CPU Topology +* +* Copyright (c) 2021 IBM Corp +* +* Authors: +* Pierre Morel <[email protected]> +*/ + +#include <libcflat.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> +#include <asm/interrupt.h> +#include <asm/facility.h> +#include <smp.h> +#include <sclp.h> + +static uint8_t pagebuf[PAGE_SIZE *2 ]
__attribute__((aligned(PAGE_SIZE * 2))); +intmachine_level;s390x/topology.c new file +6
-0+int mnest; + +#define PTF_HORIZONTAL 0 +#define PTF_VERTICAL 1 +#define PTF_CHECK 2 +s390x/topology.c line 36
Quoted 10 lines
s390x/topology.c new file +10
-0+#define PTF_ERR_NO_REASON 0 +#define PTF_ERR_ALRDY_POLARIZED 1 +#define PTF_ERR_IN_PROGRESS 2 + +static int ptf (unsigned long fc,unsigned long *rc) +{ +int cc; + + asmvolatile ( + " .insn rre,0xb9a20000,%1,%1\n"I know you copied this from the kernel, but the second argument is not really there according to the PoP, so maybe it's better to have this instead?
Quoted 1 line
.insn rre,0xb9a20000,%1,0\n
OK, thanks.
Quoted 27 lines
Quoted 27 lines
s390x/topology.c new file +26
-0+ " ipm %0\n" + " srl %0,28\n" + : "=d" (cc), "+d" (fc) + : "d" (fc) + : "cc"); + + *rc = fc >>8 ; +return cc; +} + +static void test_ptf (void ) +{ +unsigned long rc; +int cc; + +report_prefix_push ("Topology Report pending" ); +/* +* At this moment the topology may already have changed +* since the VM has been started. +* However, we can test if a second PTF instruction +* reports that the topology did not change since the +* preceding PFT instruction. +*/ +ptf (PTF_CHECK , &rc); + cc =ptf (PTF_CHECK , &rc); +report (cc ==0 ,"PTF check clear" );
Quoted 8 lines
s390x/topology.c line 68
Quoted 6 lines
s390x/topology.c new file +6
-0+ cc =ptf (PTF_HORIZONTAL , &rc); +report (cc ==2 && rc ==PTF_ERR_ALRDY_POLARIZED , +"PTF horizontal already configured" ); + cc =ptf (PTF_VERTICAL , &rc); +report (cc ==2 && rc ==PTF_ERR_NO_REASON , +"PTF vertical non possible" );*not possible
Oh yes :)
Quoted 10 lines
s390x/topology.c line 75
Quoted 8 lines
s390x/topology.c new file +7
-0+ +report_prefix_pop (); +} + +int main (int argc,char *argv[]) +{ +report_prefix_push ("stsi" );should this really be "stsi" ?
No, I think CPU-Topology should be better.
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH 4/4 s390x: Topology: checking Configuration Topology Information
In reply to Pierre MorelSTSI with function code 15 is used to store the CPU configuration topology.
We check if the topology stored is coherent with the QEMU -smp parameters.
The current check is done on the number of CPUs, the maximum number of CPUs, the number of sockets and the number of cores per sockets.
--- s390x/topology.c | 207 ++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 1 + 2 files changed, 208 insertions(+)
s390x/topology.c +207 -0
@@ -19,6 +19,51 @@ static uint8_t pagebuf[PAGE_SIZE * 2] __attribute__((aligned(PAGE_SIZE * 2)));int machine_level;int mnest; +static long max_cpus; +static long cores; +static long sockets; +static long books; +static long drawers; +static long nodes; +static long ncpus; + +struct topology_core { +unsigned char nl; +unsigned char reserved0[3 ]; + unsigned char :5; +unsigned char d:1 ; +unsigned char pp:2 ; +unsigned char type; +unsigned short origin; +unsigned long mask; +}; + +struct topology_container { +unsigned char nl; +unsigned char reserved[6 ]; +unsigned char id; +}; + +union topology_entry { +unsigned char nl; +struct topology_core cpu; +struct topology_container container; +}; + +struct sysinfo_15_1_x { +unsigned char reserved0[2 ]; +unsigned short length; +unsigned char mag6; +unsigned char mag5; +unsigned char mag4; +unsigned char mag3; +unsigned char mag2; +unsigned char mag1; +unsigned char reserved1; +unsigned char mnest; +unsigned char reserved2[4 ]; +union topology_entry tle[0 ]; +};#define PTF_HORIZONTAL 0#define PTF_VERTICAL 1
@@ -70,9 +115,170 @@ static void test_ptf(void)report_prefix_pop (); } +static void check_sysinfo_15_1_x (struct sysinfo_15_1_x *info) +{ +struct topology_container *tc, *end; +struct topology_core *cpus; +int nb_nl0 =0 , nb_nl1 =0 , nb_nl2 =0 , nb_nl3 =0 ; + +if (mnest >5 ) +report (info->mag6 ==0 ,"topology level 6" ); +if (mnest >4 ) +report (info->mag5 == nodes,"Maximum number of nodes" ); +if (mnest >3 ) +report (info->mag4 == drawers,"Maximum number of drawers" ); +if (mnest >2 ) +report (info->mag3 == books,"Maximum number of book" ); + +/* Both levels 2 and 1 are always valid */ +report (info->mag2 == sockets,"Maximum number of sockets" ); +report (info->mag1 == cores,"Maximum number of cores" ); + + tc = (void *)&info->tle[0 ]; + end = (struct topology_container *)((unsigned long )info + info->length); + +while (tc < end) { +switch (tc->nl) { +case 3 : +report_info ("drawer: %d %d" , tc->nl, tc->id); + nb_nl3++; +break ; +case 2 : +report_info ("book : %d %d" , tc->nl, tc->id); + nb_nl2++; +break ; +case 1 : +report_info ("socket: %d %d" , tc->nl, tc->id); + nb_nl1++; +break ; +case 0 : + cpus = (struct topology_core *) tc; +report_info ("cpu type %02x d: %d pp: %d" , cpus->type, cpus->d, cpus->pp); +report_info ("origin : %04x mask %016lx" , cpus->origin, cpus->mask); + tc++; + nb_nl0++; +break ; +default : +report_abort ("Unexpected TL Entry: tle->nl: %d" , tc->nl); +return ; + } + tc++; + } +/* +* As we accept only 1 type of CPU, and only horizontal and dedicated CPUs +* We expect max_cpus / cores CPU entries +*/ +report (nb_nl0 == (1 + (ncpus -1 ) / cores), +"Check count of cores: %d %ld" , nb_nl0, ncpus / cores); +/* We expect the same count of sockets and CPU entries */ +report (nb_nl1 == nb_nl0,"Check count of sockets" ); +if (mnest >2 ) +report (nb_nl2 == nb_nl1 / sockets,"Checks count of books" ); +if (mnest >3 ) +report (nb_nl3 == nb_nl2 / books,"Checks count of drawers" ); +} + +static void test_stsi (void ) +{ +int ret; + +report_info ("VM Level: %ld" ,stsi_get_fc (pagebuf)); + + mnest =sclp_get_stsi_parm (); +/* If the STSI parm is 0, the maximum MNEST for STSI is 2 */ +if (!mnest) + mnest =2 ; +report_info ("SCLP MNEST: %d" , mnest); + + ret =sclp_get_cpu_num (); +report_info ("SCLP CPU : %d" , ret); + + ret =stsi (pagebuf,15 ,1 ,2 ); +report (!ret,"valid stsi 15.1.2" ); +if (!ret) +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); +else +report_info (" ret: %d" , ret); + +if (mnest <3 ) { +report (stsi (pagebuf,15 ,1 ,3 ) ==3 ,"invalid stsi 15.1.3" ); + }else { +report (stsi (pagebuf,15 ,1 ,3 ) ==0 ,"valid stsi 15.1.3" ); +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); + } + +if (mnest <4 ) { +report (stsi (pagebuf,15 ,1 ,4 ) ==3 ,"invalid stsi 15.1.4" ); + }else { +report (stsi (pagebuf,15 ,1 ,4 ) ==0 ,"valid stsi 15.1.4" ); +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); + } + +if (mnest <5 ) { +report (stsi (pagebuf,15 ,1 ,5 ) ==3 ,"invalid stsi 15.1.5" ); + }else { +report (stsi (pagebuf,15 ,1 ,5 ) ==0 ,"valid stsi 15.1.5" ); +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); + } + +if (mnest <6 ) { +report (stsi (pagebuf,15 ,1 ,6 ) ==3 ,"invalid stsi 15.1.6" ); + }else { +report (stsi (pagebuf,15 ,1 ,6 ) ==0 ,"valid stsi 15.1.6" ); +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); + } +} + +static void parse_topology_args (int argc,char **argv) +{ +int i; + +for (i =1 ; i < argc; i++) { +if (!strcmp ("-c" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-c (cores) needs a parameter" ); + cores =atol (argv[i]); + }else if (!strcmp ("-s" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-s (sockets) needs a parameter" ); + sockets =atol (argv[i]); + }else if (!strcmp ("-b" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-b (books) needs a parameter" ); + books =atol (argv[i]); + }else if (!strcmp ("-d" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-d (drawers) needs a parameter" ); + drawers =atol (argv[i]); + }else if (!strcmp ("-n" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-n (nodes) needs a parameter" ); + nodes =atol (argv[i]); + } + } +if (!cores) + cores =1 ; +if (!sockets) + sockets =1 ; +if (!books) + books =1 ; +if (!drawers) + drawers =1 ; +if (!nodes) + nodes =1 ; + max_cpus = cores * sockets * books * drawers * nodes; + ncpus =smp_query_num_cpus (); +} +int main (int argc,char *argv[]) {report_prefix_push ("stsi" ); +parse_topology_args (argc, argv);if (!test_facility (11 )) {report_skip ("Topology facility not present" );
@@ -82,6 +288,7 @@ int main(int argc, char *argv[])report_info ("Machine level %ld" ,stsi_get_fc (pagebuf));test_ptf (); +test_stsi (); end:return report_summary (); }
s390x/unittests.cfg +1 -0
@@ -112,3 +112,4 @@ file = mvpg-sie.elf [topology] file = topology.elf +extra_params=-smp 5,sockets=4,cores=4,maxcpus=16 -append "-n 5 -s 4 -c 4 -m 16"
Signature · 1 line
2.25.1
Re: [kvm-unit-tests PATCH v1 4/4] s390x: Topology: checking Configuration Topology Information
Quoted 81 lines · On Mon, 9 Aug 2021 10:48:54 +0200 Pierre Morel <[email protected]> wrote:
STSI with function code 15 is used to store the CPU configuration topology.
We check if the topology stored is coherent with the QEMU -smp parameters.
The current check is done on the number of CPUs, the maximum number of CPUs, the number of sockets and the number of cores per sockets.Signed-off-by Pierre Morel <[email protected]>--- s390x/topology.c | 207++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 1 + 2 files changed, 208 insertions(+)
s390x/topology.c +52
-0@@ -19,6 +19,51 @@ static uint8_t pagebuf[PAGE_SIZE * 2] __attribute__((aligned(PAGE_SIZE * 2))); int machine_level;int mnest; +static long max_cpus; +static long cores; +static long sockets; +static long books; +static long drawers; +static long nodes; +static long ncpus; + +struct topology_core { +unsigned char nl; +unsigned char reserved0[3 ]; + unsigned char :5; +unsigned char d:1 ; +unsigned char pp:2 ; +unsigned char type; +unsigned short origin; +unsigned long mask; +}; + +struct topology_container { +unsigned char nl; +unsigned char reserved[6 ]; +unsigned char id; +}; + +union topology_entry { +unsigned char nl; +struct topology_core cpu; +struct topology_container container; +}; + +struct sysinfo_15_1_x { +unsigned char reserved0[2 ]; +unsigned short length; +unsigned char mag6; +unsigned char mag5; +unsigned char mag4; +unsigned char mag3; +unsigned char mag2; +unsigned char mag1; +unsigned char reserved1; +unsigned char mnest; +unsigned char reserved2[4 ]; +union topology_entry tle[0 ]; +};#define PTF_HORIZONTAL 0#define PTF_VERTICAL 1@@ -70,9 +115,170 @@ static void test_ptf(void)report_prefix_pop (); } +static void check_sysinfo_15_1_x (struct sysinfo_15_1_x *info) +{ +struct topology_container *tc, *end; +struct topology_core *cpus; +int nb_nl0 =0 , nb_nl1 =0 , nb_nl2 =0 , nb_nl3 =0 ; + +if (mnest >5 )
s390x/topology.c static void test_ptf(void) · line 134
Quoted 10 lines
s390x/topology.c +7
-0+report (info->mag6 ==0 ,"topology level 6" ); +if (mnest >4 ) +report (info->mag5 == nodes,"Maximum number of nodes"); +if (mnest >3 ) +report (info->mag4 == drawers,"Maximum number of drawers"); +if (mnest >2 ) +report (info->mag3 == books,"Maximum number of book");
* books
Quoted 194 lines
s390x/topology.c +6
-0+/* Both levels 2 and 1 are always valid */ +report (info->mag2 == sockets,"Maximum number of sockets" ); +report (info->mag1 == cores,"Maximum number of cores" ); + + tc = (void *)&info->tle[0 ]; + end = (struct topology_container *)((unsigned long)info +
info->length); +s390x/topology.c +17
-0+while (tc < end) { +switch (tc->nl) { +case 3 : +report_info ("drawer: %d %d" , tc->nl, tc->id); + nb_nl3++; +break ; +case 2 : +report_info ("book : %d %d" , tc->nl, tc->id); + nb_nl2++; +break ; +case 1 : +report_info ("socket: %d %d" , tc->nl, tc->id); + nb_nl1++; +break ; +case 0 : + cpus = (struct topology_core *) tc; + report_info("cpu type %02x d: %d pp: %d",
cpus->type,cpus->d,cpus->pp);s390x/topology.c +1
-0+ report_info("origin : %04x mask %016lx",
cpus->origin,cpus->mask);s390x/topology.c +5
-0+ tc++; + nb_nl0++; +break ; +default : + report_abort("Unexpected TL Entry: tle->nl:%d",
tc->nl);s390x/topology.c +6
-0+return ; + } + tc++; + } +/* +* As we accept only 1 type of CPU, and only horizontal and dedicated CPUs
s390x/topology.c +4
-0+* We expect max_cpus / cores CPU entries +*/ + report(nb_nl0 == (1 + (ncpus - 1) / cores), + "Check count of cores: %d %ld", nb_nl0,ncpus / cores);
s390x/topology.c +4
-0+/* We expect the same count of sockets and CPU entries */ +report (nb_nl1 == nb_nl0,"Check count of sockets" ); +if (mnest >2 ) + report(nb_nl2 == nb_nl1 / sockets, "Checks count ofbooks");
s390x/topology.c +2
-0+if (mnest >3 ) + report(nb_nl3 == nb_nl2 / books, "Checks count ofdrawers"); +}
s390x/topology.c +20
-0+ +static void test_stsi (void ) +{ +int ret; + +report_info ("VM Level: %ld" ,stsi_get_fc (pagebuf)); + + mnest =sclp_get_stsi_parm (); +/* If the STSI parm is 0, the maximum MNEST for STSI is 2 */ +if (!mnest) + mnest =2 ; +report_info ("SCLP MNEST: %d" , mnest); + + ret =sclp_get_cpu_num (); +report_info ("SCLP CPU : %d" , ret); + + ret =stsi (pagebuf,15 ,1 ,2 ); +report (!ret,"valid stsi 15.1.2" ); +if (!ret) + check_sysinfo_15_1_x((struct sysinfo_15_1_x*)pagebuf);
s390x/topology.c +5
-0+else +report_info (" ret: %d" , ret); + +if (mnest <3 ) { + report(stsi(pagebuf, 15, 1, 3) == 3, "invalid stsi15.1.3");
s390x/topology.c +2
-0+ }else { + report(stsi(pagebuf, 15, 1, 3) == 0, "valid stsi15.1.3");
s390x/topology.c +1
-0+ check_sysinfo_15_1_x((struct sysinfo_15_1_x*)pagebuf);
s390x/topology.c +4
-0+ } + +if (mnest <4 ) { + report(stsi(pagebuf, 15, 1, 4) == 3, "invalid stsi15.1.4");
s390x/topology.c +2
-0+ }else { + report(stsi(pagebuf, 15, 1, 4) == 0, "valid stsi15.1.4");
s390x/topology.c +1
-0+ check_sysinfo_15_1_x((struct sysinfo_15_1_x*)pagebuf);
s390x/topology.c +4
-0+ } + +if (mnest <5 ) { + report(stsi(pagebuf, 15, 1, 5) == 3, "invalid stsi15.1.5");
s390x/topology.c +2
-0+ }else { + report(stsi(pagebuf, 15, 1, 5) == 0, "valid stsi15.1.5");
s390x/topology.c +1
-0+ check_sysinfo_15_1_x((struct sysinfo_15_1_x*)pagebuf);
s390x/topology.c +4
-0+ } + +if (mnest <6 ) { + report(stsi(pagebuf, 15, 1, 6) == 3, "invalid stsi15.1.6");
s390x/topology.c +2
-0+ }else { + report(stsi(pagebuf, 15, 1, 6) == 0, "valid stsi15.1.6");
s390x/topology.c +1
-0+ check_sysinfo_15_1_x((struct sysinfo_15_1_x*)pagebuf);
s390x/topology.c +12
-0+ } +} + +static void parse_topology_args (int argc,char **argv) +{ +int i; + +for (i =1 ; i < argc; i++) { +if (!strcmp ("-c" , argv[i])) { + i++; +if (i >= argc) + report_abort("-c (cores) needs aparameter");
s390x/topology.c +5
-0+ cores =atol (argv[i]); + }else if (!strcmp ("-s" , argv[i])) { + i++; +if (i >= argc) + report_abort("-s (sockets) needs aparameter");
s390x/topology.c +5
-0+ sockets =atol (argv[i]); + }else if (!strcmp ("-b" , argv[i])) { + i++; +if (i >= argc) + report_abort("-b (books) needs aparameter");
s390x/topology.c +5
-0+ books =atol (argv[i]); + }else if (!strcmp ("-d" , argv[i])) { + i++; +if (i >= argc) + report_abort("-d (drawers) needs aparameter");
s390x/topology.c +5
-0+ drawers =atol (argv[i]); + }else if (!strcmp ("-n" , argv[i])) { + i++; +if (i >= argc) + report_abort("-n (nodes) needs aparameter");
s390x/topology.c +19
-0+ nodes =atol (argv[i]); + } + } +if (!cores) + cores =1 ; +if (!sockets) + sockets =1 ; +if (!books) + books =1 ; +if (!drawers) + drawers =1 ; +if (!nodes) + nodes =1 ; + max_cpus = cores * sockets * books * drawers * nodes; + ncpus =smp_query_num_cpus (); +} +int main (int argc,char *argv[]) {report_prefix_push ("stsi" ); +parse_topology_args (argc, argv);if (!test_facility (11 )) {report_skip ("Topology facility not present" );@@ -82,6 +288,7 @@ int main(int argc, char *argv[])report_info ("Machine level %ld" ,stsi_get_fc (pagebuf));test_ptf (); +test_stsi (); end:return report_summary (); }s390x/unittests.cfg +1
-1@@ -112,3 +112,4 @@ file = mvpg-sie.elf [topology] file = topology.elf +extra_params=-smp 5,sockets=4,cores=4,maxcpus=16 -append "-n 5 -s 4 -c 4 -m 16"
Re: [kvm-unit-tests PATCH v1 4/4] s390x: Topology: checking Configuration Topology Information
Quoted 6 lines · Claudio Imbrenda
Quoted 3 lines · On Mon, 9 Aug 2021 10:48:54 +0200 Pierre Morel <[email protected]> wrote:
STSI with function code 15 is used to store the CPU configuration topology.
...
Quoted 12 lines
Quoted 12 lines
s390x/topology.c +10
-0+static void check_sysinfo_15_1_x (struct sysinfo_15_1_x *info) +{ +struct topology_container *tc, *end; +struct topology_core *cpus; +int nb_nl0 =0 , nb_nl1 =0 , nb_nl2 =0 , nb_nl3 =0 ; + +if (mnest >5 ) +report (info->mag6 ==0 ,"topology level 6" ); +if (mnest >4 ) + report(info->mag5 == nodes, "Maximum number ofnodes");
Quoted 8 lines
Quoted 6 lines
(quoted diff) +2
-0+ if (mnest > 3) + report(info->mag4 == drawers, "Maximum number ofdrawers");
(quoted diff) +2
-0+ if (mnest > 2) + report(info->mag3 == books, "Maximum number ofbook");
* books
right, thanks
...
regards,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen