patch "iio: adis: set GPIO reset pin direction" added to staging-linus

This is a note to let you know that I've just added the patch titled

iio: adis: set GPIO reset pin direction

to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From 7e77ef8b8d600cf8448a2bbd32f682c28884551f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Antti=20Ker=C3=A4nen?= <[email protected]>
Date: Thu, 8 Jul 2021 12:54:29 +0300
Subject: iio: adis: set GPIO reset pin direction
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Set reset pin direction to output as the reset pin needs to be an active low output pin.

---
 drivers/iio/imu/adis.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

index a5b421f42287..b9a06ca29bee 100644
@@ -411,12 +411,11 @@ int __adis_initial_startup(struct adis *adis)
 	int ret;
 
 	/* check if the device has rst pin low */
-	gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_ASIS);
+	gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(gpio))
 		return PTR_ERR(gpio);
 
 	if (gpio) {
-		gpiod_set_value_cansleep(gpio, 1);
 		msleep(10);
 		/* bring device out of reset */
 		gpiod_set_value_cansleep(gpio, 0);

2.32.0