arm64: dts: qcom: sc7280: Add venus DT node
Subsystems (4)
PATCH v5 1/1 arm64: dts: qcom: sc7280: Add venus DT node
Add DT entries for the sc7280 venus encoder/decoder.
Change since v4:
rebased on latest linux-next tree.
this patch depends on [1].
[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=529463
--- arch/arm64/boot/dts/qcom/sc7280.dtsi | 75 ++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)
arch/arm64/boot/dts/qcom/sc7280.dtsi +75 -0
@@ -73,6 +73,11 @@ reg = <0x0 0x80b00000 0x0 0x100000>; }; + video_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + ipa_fw_mem: memory@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map;
@@ -1398,6 +1403,76 @@ }; }; + venus: video-codec@aa00000 { + compatible = "qcom,sc7280-venus"; + reg = <0 0x0aa00000 0 0xd0600>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, + <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_MVS0_CORE_CLK>, + <&videocc VIDEO_CC_MVS0_AXI_CLK>; + clock-names = "core", "bus", "iface", + "vcodec_core", "vcodec_bus"; + + power-domains = <&videocc MVSC_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC7280_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + operating-points-v2 = <&venus_opp_table>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2180 0x20>, + <&apps_smmu 0x2184 0x20>; + memory-region = <&video_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; + }; + + venus_opp_table: venus-opp-table { + compatible = "operating-points-v2"; + + opp-133330000 { + opp-hz = /bits/ 64 <133330000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-335000000 { + opp-hz = /bits/ 64 <335000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-424000000 { + opp-hz = /bits/ 64 <424000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + }; + videocc: clock-controller@aaf0000 { compatible = "qcom,sc7280-videocc"; reg = <0 0xaaf0000 0 0x10000>;
Signature · 1 line
2.7.4
kernel test robot
build botThank you for the patch! Yet something to improve:
Hi Dikshita,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on next-20210810]
[cannot apply to robh/for-next v5.14-rc5 v5.14-rc4 v5.14-rc3 v5.14-rc5] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Dikshita-Agarwal/arm64-dts-qcom-sc7280-Add-venus-DT-node/20210811-160941 base: 92d00774360dfd4151f15ab9905c643347b9f242 config: arm64-allyesconfig (attached as .config) compiler: aarch64-linux-gcc (GCC) 10.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/cea97e9e68d2174bcb82f2b0ff1aa52c7499c6a7
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Dikshita-Agarwal/arm64-dts-qcom-sc7280-Add-venus-DT-node/20210811-160941 git checkout cea97e9e68d2174bcb82f2b0ff1aa52c7499c6a7
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-10.3.0 make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
>> Error: arch/arm64/boot/dts/qcom/sc7280.dtsi:1408.23-24 syntax error >> FATAL ERROR: Unable to parse input tree
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Hello,
A gentle reminder for review.
Thanks,
Dikshita
Quoted 111 lines · Dikshita Agarwal
Add DT entries for the sc7280 venus encoder/decoder.
Change since v4:
rebased on latest linux-next tree.this patch depends on [1].
[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=529463
Co-developed-by Mansur Alisha Shaik <[email protected]>Signed-off-by Dikshita Agarwal <[email protected]>--- arch/arm64/boot/dts/qcom/sc7280.dtsi | 75 ++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)arch/arm64/boot/dts/qcom/sc7280.dtsi +75
-0@@ -73,6 +73,11 @@ reg = <0x0 0x80b00000 0x0 0x100000>; }; + video_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + ipa_fw_mem: memory@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map;@@ -1398,6 +1403,76 @@ }; }; + venus: video-codec@aa00000 { + compatible = "qcom,sc7280-venus"; + reg = <0 0x0aa00000 0 0xd0600>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, + <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_MVS0_CORE_CLK>, + <&videocc VIDEO_CC_MVS0_AXI_CLK>; + clock-names = "core", "bus", "iface", + "vcodec_core", "vcodec_bus"; + + power-domains = <&videocc MVSC_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC7280_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + operating-points-v2 = <&venus_opp_table>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2180 0x20>, + <&apps_smmu 0x2184 0x20>; + memory-region = <&video_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; + }; + + venus_opp_table: venus-opp-table { + compatible = "operating-points-v2"; + + opp-133330000 { + opp-hz = /bits/ 64 <133330000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-335000000 { + opp-hz = /bits/ 64 <335000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-424000000 { + opp-hz = /bits/ 64 <424000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + }; + videocc: clock-controller@aaf0000 { compatible = "qcom,sc7280-videocc";reg = <0
0xaaf000000x10000>;