Skip to contentSkip to conversation

irqdomain: Export irq_domain_disconnect_hierarchy()

PATCH Superseded Maulik Shah 2 participants 4 messages Aug 17, 2021 – Aug 19, 2021

Subsystems (5)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 irqdomain: Export irq_domain_disconnect_hierarchy()

Export irq_domain_disconnect_hierarchy() so irqchip module drivers can use it.

---
 kernel/irq/irqdomain.c | 1 +
 1 file changed, 1 insertion(+)
kernel/irq/irqdomain.c +1 -0
index 0eee481..19e83e9 100644
@@ -1216,6 +1216,7 @@ int irq_domain_disconnect_hierarchy(struct irq_domain *domain,
 	irqd->chip = ERR_PTR(-ENOTCONN);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(irq_domain_disconnect_hierarchy);
 
 static int irq_domain_trim_hierarchy(unsigned int virq)
 {
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw

PATCH 2/2 irqchip: qcom-pdc: Disconnect domain hierarchy for GPIO_NO_WAKE_IRQs

gpio_to_irq() reports error at irq_domain_trim_hierarchy() for non wakeup capable GPIOs that do not have dedicated interrupt at GIC.

Since PDC irqchip do not allocate irq at parent GIC domain for such GPIOs indicate same by using irq_domain_disconnect_hierarchy().

---
 drivers/irqchip/qcom-pdc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/irqchip/qcom-pdc.c +4 -1
index 32d5920..0ba0461 100644
@@ -324,8 +324,11 @@ static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
 	if (ret)
 		return ret;
 
-	if (hwirq == GPIO_NO_WAKE_IRQ)
+	if (hwirq == GPIO_NO_WAKE_IRQ) {
+		if (domain->parent)
+			irq_domain_disconnect_hierarchy(domain->parent, virq);
 		return 0;
+	}
 
 	parent_hwirq = get_parent_hwirq(hwirq);
 	if (parent_hwirq == PDC_NO_PARENT_IRQ)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#2 lore raw

Re: [PATCH 2/2] irqchip: qcom-pdc: Disconnect domain hierarchy for GPIO_NO_WAKE_IRQs

Hi Maulik,

In the future, please always add a cover-letter email if sending a series that has more than a single patch. This considerably helps the tracking, and gives you an opportunity to explain what you are doing.

Quoted 19 lines · Maulik Shah

gpio_to_irq() reports error at irq_domain_trim_hierarchy() for non wakeup capable GPIOs that do not have dedicated interrupt at GIC.

Since PDC irqchip do not allocate irq at parent GIC domain for such GPIOs indicate same by using irq_domain_disconnect_hierarchy().

---
 drivers/irqchip/qcom-pdc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/irqchip/qcom-pdc.c +0 -0
index 32d5920..0ba0461 100644
@@ -324,8 +324,11 @@ static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
 	if (ret)
 		return ret;

drivers/irqchip/qcom-pdc.c static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq, · line 334

Quoted 10 lines
drivers/irqchip/qcom-pdc.c +4 -1
 
-	if (hwirq == GPIO_NO_WAKE_IRQ)
+	if (hwirq == GPIO_NO_WAKE_IRQ) {
+		if (domain->parent)
+			irq_domain_disconnect_hierarchy(domain->parent, virq);
 		return 0;
+	}
 
 	parent_hwirq = get_parent_hwirq(hwirq);
 	if (parent_hwirq == PDC_NO_PARENT_IRQ)

It feels like you are papering over the core of the problem, which is that most of the GPIO_NO_WAKE_IRQ stuff should simply go away now that we have a way to drop parts of the hierarchy.

I had a go at that a few months back, but never had the opportunity to actually test the resulting code[1]. Could you please give it a go and let me know what breaks?

Thanks,

	M.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/commit/?h=irq/qcom-pdc-nowake&id=331b2ba388a4a79b5c40b8addf56cbe35099a410

Signature · 1 line
Without deviation from the norm, progress is not possible.
#3 lore raw

Re: [PATCH 2/2] irqchip: qcom-pdc: Disconnect domain hierarchy for GPIO_NO_WAKE_IRQs

Hi Marc,

Quoted 5 lines · Marc Zyngier

Hi Maulik,

In the future, please always add a cover-letter email if sending a series that has more than a single patch. This considerably helps the tracking, and gives you an opportunity to explain what you are doing.

sure. i included same in v2 now.

Quoted 29 lines
Quoted 26 lines · Maulik Shah

gpio_to_irq() reports error at irq_domain_trim_hierarchy() for non wakeup capable GPIOs that do not have dedicated interrupt at GIC.

Since PDC irqchip do not allocate irq at parent GIC domain for such GPIOs indicate same by using irq_domain_disconnect_hierarchy().

---
  drivers/irqchip/qcom-pdc.c | 5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)
drivers/irqchip/qcom-pdc.c +4 -1
index 32d5920..0ba0461 100644
@@ -324,8 +324,11 @@ static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
  	if (ret)
  		return ret;
 
-	if (hwirq == GPIO_NO_WAKE_IRQ)
+	if (hwirq == GPIO_NO_WAKE_IRQ) {
+		if (domain->parent)
+			irq_domain_disconnect_hierarchy(domain->parent, virq);
  		return 0;
+	}
 
Quoted 5 lines

drivers/irqchip/qcom-pdc.c static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq, · line 334

Quoted 2 lines
drivers/irqchip/qcom-pdc.c +0 -0
  	parent_hwirq = get_parent_hwirq(hwirq);
  	if (parent_hwirq == PDC_NO_PARENT_IRQ)

It feels like you are papering over the core of the problem, which is that most of the GPIO_NO_WAKE_IRQ stuff should simply go away now that we have a way to drop parts of the hierarchy.

ok makes sense to disconnect from PDC domain itself instead only disconnecting for parent GIC domain.

Quoted 4 lines

I had a go at that a few months back, but never had the opportunity to actually test the resulting code[1]. Could you please give it a go and let me know what breaks?

Thanks for the patch [1]. i tested and found below issues.

1.
For GPIO_NO_WAKE_IRQ case, The patch disconnects hierarchy for current domain (PDC)
However for parent domain (GIC) its don't call disconnect.
This leads to irq_domain_trim_hierarchy() still complain the error at parent domain.
To fix this, whenever irqchip disconnects hierarchy at its domain, it has to disconnect for all its parent domains too.

something like this works in qcom_pdc_gpio_alloc()

        if (hwirq == GPIO_NO_WAKE_IRQ) {
-               if (domain->parent) {
- irq_domain_disconnect_hierarchy(domain->parent, virq);

+               for (parent = domain; parent; parent = parent->parent) { +                       ret = irq_domain_disconnect_hierarchy(parent, virq); +                       if (ret)
+                               return ret;
                }
                return 0;
        }

2.  irq_domain_trim_hierarchy() has two issues.

    The first is tail is moving along with irqd of domain.
    so trimming do not start at correct parent domain.
    tails has to be initialized only once, starting from which we want to trim all the parent domains hierarchy.

    The second is the below check is not proper to find valid irq chip.
    say for both (PDC and GIC) domains the irqd->chip is set to -ENOTCONN.
    then irqd->chip check will still pass for domain (even if its -ENOTCONN) and if tail is set it will false complain.

    /* Can't have a valid irqchip after a trim marker */ -               if (irqd->chip && tail)
+               if (!IS_ERR(irqd->chip) && tail) {

I have picked up your change in v2 and added above mentioned issue fixes. please take a look on v2.

Thanks,
Maulik

Quoted 7 lines

Thanks,

	M.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/commit/?h=irq/qcom-pdc-nowake&id=331b2ba388a4a79b5c40b8addf56cbe35099a410

Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation