Linux 5.14.14
Greg Kroah-Hartman
maintainerI'm announcing the release of the 5.14.14 kernel.
All users of the 5.14 kernel series must upgrade.
The updated 5.14.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.14.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 11 +- arch/arm/boot/dts/bcm2711.dtsi | 12 ++ arch/arm/boot/dts/bcm2835-common.dtsi | 8 + arch/arm/boot/dts/bcm283x.dtsi | 8 - arch/arm64/mm/hugetlbpage.c | 2 arch/csky/kernel/ptrace.c | 3 arch/csky/kernel/signal.c | 4 arch/powerpc/sysdev/xive/common.c | 3 arch/s390/lib/string.c | 15 +-- arch/x86/Kconfig | 1 arch/x86/kernel/cpu/resctrl/core.c | 2 arch/x86/kernel/fpu/signal.c | 2 drivers/acpi/arm64/gtdt.c | 2 drivers/acpi/x86/s2idle.c | 3 drivers/ata/libahci_platform.c | 5 - drivers/ata/pata_legacy.c | 6 - drivers/base/core.c | 3 drivers/block/rnbd/rnbd-clt-sysfs.c | 4 drivers/block/virtio_blk.c | 41 +-------- drivers/bus/simple-pm-bus.c | 42 ++++++++- drivers/clk/renesas/renesas-rzg2l-cpg.c | 2 drivers/clk/socfpga/clk-agilex.c | 9 -- drivers/edac/armada_xp_edac.c | 2 drivers/firmware/arm_ffa/bus.c | 12 ++ drivers/firmware/efi/cper.c | 4 drivers/firmware/efi/runtime-wrappers.c | 2 drivers/fpga/ice40-spi.c | 7 + drivers/gpio/gpio-74x164.c | 8 + drivers/gpio/gpio-pca953x.c | 16 ++- drivers/gpu/drm/drm_edid.c | 15 ++- drivers/gpu/drm/drm_fb_helper.c | 6 + drivers/gpu/drm/msm/adreno/a3xx_gpu.c | 9 +- drivers/gpu/drm/msm/adreno/a4xx_gpu.c | 9 +- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 - drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 11 ++ drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 16 +++ drivers/gpu/drm/msm/dsi/dsi.c | 4 drivers/gpu/drm/msm/dsi/dsi_host.c | 2 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 30 +++--- drivers/gpu/drm/msm/edp/edp_ctrl.c | 3 drivers/gpu/drm/msm/msm_drv.c | 12 +- drivers/gpu/drm/msm/msm_drv.h | 5 - drivers/gpu/drm/msm/msm_gem_submit.c | 3 drivers/gpu/drm/nouveau/nvkm/engine/fifo/chang84.c | 2 drivers/gpu/drm/panel/Kconfig | 1 drivers/iio/accel/fxls8962af-core.c | 2 drivers/iio/adc/ad7192.c | 1 drivers/iio/adc/ad7780.c | 2 drivers/iio/adc/ad7793.c | 2 drivers/iio/adc/aspeed_adc.c | 1 drivers/iio/adc/max1027.c | 3 drivers/iio/adc/mt6577_auxadc.c | 8 + drivers/iio/adc/ti-adc128s052.c | 6 + drivers/iio/common/ssp_sensors/ssp_spi.c | 11 ++ drivers/iio/dac/ti-dac5571.c | 1 drivers/iio/imu/adis16475.c | 3 drivers/iio/imu/adis16480.c | 14 ++- drivers/iio/light/opt3001.c | 6 - drivers/input/joystick/xpad.c | 2 drivers/input/touchscreen/resistive-adc-touch.c | 29 +++--- drivers/md/dm-rq.c | 8 + drivers/md/dm.c | 17 ++- drivers/misc/cb710/sgbuf2.c | 2 drivers/misc/eeprom/at25.c | 8 + drivers/misc/eeprom/eeprom_93xx46.c | 18 ++++ drivers/misc/fastrpc.c | 2 drivers/misc/mei/hbm.c | 12 +- drivers/misc/mei/hw-me-regs.h | 1 drivers/misc/mei/pci-me.c | 1 drivers/mtd/nand/raw/qcom_nandc.c | 8 + drivers/net/dsa/microchip/ksz_common.c | 4 drivers/net/dsa/mv88e6xxx/chip.c | 13 ++ drivers/net/dsa/ocelot/felix.c | 25 +++-- drivers/net/ethernet/Kconfig | 1 drivers/net/ethernet/arc/Kconfig | 1 drivers/net/ethernet/intel/ice/ice_ptp.c | 15 +-- drivers/net/ethernet/mellanox/mlx5/core/cq.c | 7 - drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 57 +++++++++++- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 1 drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 52 +---------- drivers/net/ethernet/microchip/encx24j600-regmap.c | 10 +- drivers/net/ethernet/microchip/encx24j600.c | 5 - drivers/net/ethernet/microchip/encx24j600_hw.h | 4 drivers/net/ethernet/mscc/ocelot.c | 90 +++++++++++++++----- drivers/net/ethernet/neterion/s2io.c | 2 drivers/net/ethernet/netronome/nfp/flower/main.c | 19 +++- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 4 drivers/net/ethernet/qlogic/qed/qed_main.c | 1 drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 13 ++ drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 6 - drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 6 - drivers/net/ethernet/stmicro/stmmac/hwif.h | 6 - drivers/net/phy/phy_device.c | 3 drivers/net/usb/Kconfig | 4 drivers/nvme/host/pci.c | 2 drivers/nvmem/core.c | 3 drivers/platform/mellanox/mlxreg-io.c | 4 drivers/platform/x86/amd-pmc.c | 1 drivers/platform/x86/gigabyte-wmi.c | 1 drivers/platform/x86/intel_scu_ipc.c | 2 drivers/spi/spi-atmel.c | 4 drivers/spi/spi-bcm-qspi.c | 77 ++++++++++------- drivers/spi/spidev.c | 14 +++ drivers/tee/optee/core.c | 3 drivers/tee/optee/device.c | 22 ++++ drivers/tee/optee/optee_private.h | 1 drivers/usb/host/xhci-dbgtty.c | 28 ++---- drivers/usb/host/xhci-pci.c | 6 + drivers/usb/host/xhci-ring.c | 39 +++++++- drivers/usb/host/xhci.c | 5 + drivers/usb/host/xhci.h | 1 drivers/usb/musb/musb_dsps.c | 4 drivers/usb/serial/option.c | 8 + drivers/usb/serial/qcserial.c | 1 drivers/vhost/vdpa.c | 2 drivers/virtio/virtio.c | 11 ++ fs/btrfs/extent-tree.c | 1 fs/btrfs/file.c | 19 ++-- fs/btrfs/tree-log.c | 32 ++++--- include/linux/mlx5/mlx5_ifc.h | 10 +- include/soc/mscc/ocelot.h | 6 + include/soc/mscc/ocelot_ptp.h | 3 kernel/module.c | 2 kernel/trace/trace.c | 11 -- net/dsa/switch.c | 2 net/mptcp/protocol.c | 55 +++--------- net/nfc/af_nfc.c | 3 net/nfc/digital_core.c | 9 +- net/nfc/digital_technology.c | 8 + net/sched/sch_mqprio.c | 30 ++++-- net/sctp/sm_make_chunk.c | 2 net/smc/smc_cdc.c | 7 + net/smc/smc_core.c | 20 ++-- net/smc/smc_llc.c | 63 ++++++++++---- net/smc/smc_tx.c | 22 +--- net/smc/smc_wr.h | 14 +++ scripts/recordmcount.pl | 2 sound/core/pcm_compat.c | 72 +++++++++++++++- sound/core/seq_device.c | 8 - sound/pci/hda/patch_realtek.c | 66 +++++++++++++- sound/usb/mixer_scarlett_gen2.c | 2 sound/usb/quirks-table.h | 42 +++++++++ 143 files changed, 1146 insertions(+), 496 deletions(-)
Al Viro (1):
csky: don't let sigreturn play with priveleged bits of status register
Aleksander Morgado (1):
USB: serial: qcserial: add EM9191 QDL support
Alexander Usyskin (1):
mei: hbm: drop hbm responses on early shutdown
Alexandru Tachici (3):
iio: adc: ad7192: Add IRQ flag
iio: adc: ad7780: Fix IRQ flag
iio: adc: ad7793: Fix IRQ flag
Alvin Šipraga (1):
net: dsa: fix spurious error message when unoffloaded port leaves bridge
Andy Shevchenko (2):
mei: me: add Ice Lake-N device id.
gpio: pca953x: Improve bias setting
Ard Biesheuvel (1):
efi/cper: use stack buffer for error record decoding
Arnd Bergmann (5):
module: fix clang CFI with MODULE_UNLOAD=n
cb710: avoid NULL pointer subtraction
eeprom: 93xx46: fix MODULE_DEVICE_TABLE
ethernet: s2io: fix setting mac address during resume drm/msm/submit: fix overflow check on 64-bit architectures
Arun Ramadoss (1):
net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work
Aya Levin (1):
net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp
Baowen Zheng (1):
nfp: flow_offload: move flow_indr_dev_register from app init to app start
Biju Das (1):
clk: renesas: rzg2l: Fix clk status function
Billy Tsai (1):
iio: adc: aspeed: set driver data when adc probe.
Borislav Petkov (2):
x86/fpu: Mask out the invalid MXCSR bits properly x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically
Cameron Berkenpas (1):
ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2
Chris Chiu (1):
ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254
Christophe JAILLET (1):
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
Cindy Lu (1):
vhost-vdpa: Fix the wrong input in config_cb
Colin Ian King (1):
drm/msm: Fix null pointer dereference on pointer edp
Cédric Le Goater (1):
powerpc/xive: Discard disabled interrupts in get_irqchip_state()
Dan Carpenter (9):
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
iio: dac: ti-dac5571: fix an error code in probe()
pata_legacy: fix a couple uninitialized variable bugs drm/msm/a4xx: fix error handling in a4xx_gpu_init() drm/msm/a3xx: fix error handling in a3xx_gpu_init() drm/msm/dsi: Fix an error code in msm_dsi_modeset_init() drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs
Daniele Palmas (1):
USB: serial: option: add Telit LE910Cx composition 0x1204
Dinh Nguyen (1):
clk: socfpga: agilex: fix duplicate s2f_user0_clk
Dmitry Baryshkov (1):
drm/msm/mdp5: fix cursor-related warnings
Douglas Anderson (1):
drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read
Eiichi Tsukata (1):
sctp: account stream padding length for reconf chunk
Fabio Estevam (1):
drm/msm: Do not run snapshot on non-DPU devices
Filipe Manana (3):
btrfs: deal with errors when replaying dir entry during log replay
btrfs: deal with errors when adding inode reference during log replay
btrfs: check for error when looking up inode during dir entry replay
Florian Fainelli (1):
net: phy: Do not shutdown PHYs in READY state
Greg Kroah-Hartman (1):
Linux 5.14.14
Guo Ren (1):
csky: Fixup regs.sr broken in ptrace
Halil Pasic (1):
virtio: write back F_VERSION_1 before validate
Hans Potsch (1):
EDAC/armada-xp: Fix output of uncorrectable error counter
Herve Codina (1):
net: stmmac: fix get_hw_feature() on old hardware
Hui Liu (1):
iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED
Hui Wang (1):
ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW
Ido Schimmel (1):
mlxsw: thermal: Fix out-of-bounds memory accesses
Jackie Liu (2):
tracing: Fix missing osnoise tracer on max_latency acpi/arm64: fix next_platform_timer() section mismatch error
Jacob Keller (1):
ice: fix locking for Tx timestamp tracking flush
James Morse (1):
x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
Jiazi Li (1):
dm: fix mempool NULL pointer race when completing IO
Jiri Valek - 2N (1):
iio: light: opt3001: Fixed timeout error when 0 lux
Johan Hovold (1):
USB: xhci: dbc: fix tty registration race
John Liu (1):
ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop
Jonas Hahnfeld (1):
ALSA: usb-audio: Add quirk for VF0770
Jonathan Bell (2):
xhci: guard accesses to ep_state in xhci_endpoint_reset()
xhci: add quirk for host controllers that don't update endpoint DCS
Josef Bacik (2):
btrfs: update refs for any root except tree log roots
btrfs: fix abort logic in btrfs_replace_file_extents
Kailang Yang (1):
ALSA: hda/realtek - ALC236 headset MIC recording issue
Kamal Dasu (1):
spi: bcm-qspi: clear MSPI spifie interrupt during probe
Karsten Graul (1):
net/smc: improved fix wait on already cleared link
Keith Busch (1):
nvme-pci: Fix abort command id
Maarten Zanders (1):
net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's
Marek Vasut (2):
drm/nouveau/fifo: Reinstate the correct engine bit programming drm/msm: Avoid potential overflow in timeout_to_jiffies()
Marijn Suijten (1):
drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready
Mark Brown (5):
eeprom: 93xx46: Add SPI device ID table
eeprom: at25: Add SPI ID table
fpga: ice40-spi: Add SPI device ID table
gpio: 74x164: Add SPI device ID table
spi: spidev: Add SPI ID table
Mateusz Kwiatkowski (1):
ARM: dts: bcm283x: Fix VEC address for BCM2711
Max Gurtovoy (1):
virtio-blk: remove unneeded "likely" statements
Md Sadre Alam (1):
mtd: rawnand: qcom: Update code word value for raw read
Michael Cullen (1):
Input: xpad - add support for another USB ID of Nacon GC-100
Michael S. Tsirkin (1):
Revert "virtio-blk: Add validation for block size in config space"
Mike Kravetz (1):
arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE
Ming Lei (1):
dm rq: don't queue request to blk-mq during DM suspend
Miquel Raynal (3):
usb: musb: dsps: Fix the probe error path
iio: adc: max1027: Fix wrong shift with 12-bit devices
iio: adc: max1027: Fix the number of max1X31 channels
Nanyong Sun (1):
net: encx24j600: check error in devm_regmap_init_encx24j600
Nicolas Saenz Julienne (2):
ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
Nikolay Martynov (1):
xhci: Enable trust tx length quirk for Fresco FL11 USB controller
Nuno Sá (2):
iio: adis16480: fix devices that do not support sleep mode
iio: adis16475: fix deadlock on frequency set
Oleksij Rempel (1):
Input: resistive-adc-touch - fix division by zero error on z1 == 0
Paolo Abeni (1):
mptcp: fix possible stall on recvmsg()
Pavankumar Kondeti (1):
xhci: Fix command ring pointer corruption while aborting a command
Prashant Malani (1):
platform/x86: intel_scu_ipc: Fix busy loop expiry time
Qu Wenruo (1):
btrfs: unlock newly allocated extent buffer after error
Rob Clark (1):
drm/msm/a6xx: Track current ctx by seqno
Roberto Sassu (1):
s390: fix strrchr() implementation
Sachi King (2):
platform/x86: amd-pmc: Add alternative acpi id for PMC controller
ACPI: PM: Include alternate AMDI0005 id in special behaviour
Saeed Mahameed (1):
net/mlx5e: Switchdev representors are not vlan challenged
Saravana Kannan (2):
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices driver core: Reject pointless SYNC_STATE_ONLY device links
Sean Nyekjaer (1):
iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed
Sebastian Andrzej Siewior (1):
mqprio: Correct stats in mqprio_dump_class_stats().
Shannon Nelson (1):
ionic: don't remove netdev->dev_addr when syncing uc list
Srinivas Kandagatla (1):
misc: fastrpc: Add missing lock before accessing find_vma()
Stefan Wahren (2):
ARM: dts: bcm2711: fix MDIO #address- and #size-cells
ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
Stephen Boyd (1):
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
Steven Rostedt (1):
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
Sudeep Holla (2):
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
Sumit Garg (1):
tee: optee: Fix missing devices unregister during optee_remove
Takashi Iwai (3):
ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl
ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer
ALSA: seq: Fix a potential UAF by wrong private_free call order
Thomas Zimmermann (1):
drm/fbdev: Clamp fbdev surface size if too large
Tomaz Solc (1):
USB: serial: option: add prod. id for Quectel EG91
Vadim Pasternak (2):
platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call platform/mellanox: mlxreg-io: Fix read access of n-bytes size attributes
Valentine Fatiev (1):
net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path
Vegard Nossum (4):
net: arc: select CRC32
net: korina: select CRC32
drm/panel: olimex-lcd-olinuxino: select CRC32
r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256
Ville Baillie (1):
spi: atmel: Fix PDC transfer setup bug
Vladimir Oltean (6):
net: mscc: ocelot: make use of all 63 PTP timestamp identifiers
net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO
net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb
net: mscc: ocelot: deny TX timestamping of non-PTP packets
net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
net: dsa: felix: break at first CPU port during init and teardown
Wang Hai (1):
ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
Werner Sembach (3):
ALSA: hda/realtek: Complete partial device name to avoid ambiguity
ALSA: hda/realtek: Add quirk for Clevo X170KM-G
ALSA: hda/realtek: Add quirk for TongFang PHxTxX1
Yu-Tung Chang (1):
USB: serial: option: add Quectel EC200S-CN module support
Zephaniah E. Loss-Cutler-Hull (1):
platform/x86: gigabyte-wmi: add support for B550 AORUS ELITE AX V2
Zhang Jianhua (1):
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
Ziyang Xuan (3):
nfc: fix error handling of nfc_proto_register()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
chongjiapeng (1):
qed: Fix missing error code in qed_slowpath_start()
Greg Kroah-Hartman
maintainerMakefile +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 14 -SUBLEVEL = 13 +SUBLEVEL = 14 EXTRAVERSION = NAME = Opossums on Parade
arch/arm/boot/dts/bcm2711-rpi-4-b.dts +6 -5
@@ -40,8 +40,8 @@ sd_io_1v8_reg: sd_io_1v8_reg { regulator-always-on; regulator-settling-time-us = <5000>; gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; + states = <1800000 0x1>, + <3300000 0x0>; status = "okay"; };
@@ -217,15 +217,16 @@ phy1: ethernet-phy@1 { }; &pcie0 { - pci@1,0 { + pci@0,0 { + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; ranges; reg = <0 0 0 0 0>; - usb@1,0 { - reg = <0x10000 0 0 0 0>; + usb@0,0 { + reg = <0 0 0 0 0>; resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; }; };
arch/arm/boot/dts/bcm2711.dtsi +10 -2
@@ -300,6 +300,14 @@ pixelvalve3: pixelvalve@7ec12000 { status = "disabled"; }; + vec: vec@7ec13000 { + compatible = "brcm,bcm2711-vec"; + reg = <0x7ec13000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + dvp: clock@7ef00000 { compatible = "brcm,brcm2711-dvp"; reg = <0x7ef00000 0x10>;
@@ -532,8 +540,8 @@ genet_mdio: mdio@e14 { compatible = "brcm,genet-mdio-v5"; reg = <0xe14 0x8>; reg-names = "mdio"; - #address-cells = <0x0>; - #size-cells = <0x1>; + #address-cells = <0x1>; + #size-cells = <0x0>; }; }; };
arch/arm/boot/dts/bcm2835-common.dtsi +8 -0
@@ -106,6 +106,14 @@ i2c2: i2c@7e805000 { status = "okay"; }; + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + pixelvalve@7e807000 { compatible = "brcm,bcm2835-pixelvalve2"; reg = <0x7e807000 0x100>;
arch/arm/boot/dts/bcm283x.dtsi +0 -8
@@ -464,14 +464,6 @@ i2c1: i2c@7e804000 { status = "disabled"; }; - vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; - status = "disabled"; - }; - usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>;
arch/arm64/mm/hugetlbpage.c +1 -1
@@ -43,7 +43,7 @@ void __init arm64_hugetlb_cma_reserve(void)#ifdef CONFIG_ARM64_4K_PAGES order =PUD_SHIFT -PAGE_SHIFT ;#else - order =CONT_PMD_SHIFT +PMD_SHIFT -PAGE_SHIFT ; + order =CONT_PMD_SHIFT -PAGE_SHIFT ;#endif /* * HugeTLB CMA reservation is required for gigantic
arch/csky/kernel/ptrace.c +2 -1
@@ -99,7 +99,8 @@ static int gpr_set(struct task_struct *target,if (ret)return ret; - regs.sr =task_pt_regs (target)->sr; +/* BIT(0) of regs.sr is Condition Code/Carry bit */ + regs.sr = (regs.sr &BIT (0 )) | (task_pt_regs (target)->sr & ~BIT (0 ));#ifdef CONFIG_CPU_HAS_HILO regs.dcsr =task_pt_regs (target)->dcsr;#endif
arch/csky/kernel/signal.c +4 -0
@@ -52,10 +52,14 @@ static long restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) {int err =0 ; +unsigned long sr = regs->sr;/* sc_pt_regs is structured the same as the start of pt_regs */ err |=__copy_from_user (regs, &sc->sc_pt_regs,sizeof (struct pt_regs )); +/* BIT(0) of regs->sr is Condition Code/Carry bit */ + regs->sr = (sr & ~1 ) | (regs->sr &1 ); +/* Restore the floating-point state. */ err |=restore_fpu_state (sc);
arch/powerpc/sysdev/xive/common.c +2 -1
@@ -961,7 +961,8 @@ static int xive_get_irqchip_state(struct irq_data *data,* interrupt to be inactive in that case. */ *state = (pq !=XIVE_ESB_INVALID ) && !xd->stale_p && - (xd->saved_p || !!(pq &XIVE_ESB_VAL_P )); + (xd->saved_p || (!!(pq &XIVE_ESB_VAL_P ) && + !irqd_irq_disabled (data)));return 0 ;default :return -EINVAL ;
arch/s390/lib/string.c +7 -8
@@ -259,14 +259,13 @@ EXPORT_SYMBOL(strcmp);#ifdef __HAVE_ARCH_STRRCHRchar *strrchr (const char *s,int c) { -size_t len =__strend (s) - s; - -if (len) -do { -if (s[len] == (char ) c) -return (char *) s + len; - }while (--len >0 ); -return NULL ; +ssize_t len =__strend (s) - s; + +do { +if (s[len] == (char )c) +return (char *)s + len; + }while (--len >=0 ); +return NULL ; }EXPORT_SYMBOL (strrchr);#endif
arch/x86/Kconfig +0 -1
@@ -1520,7 +1520,6 @@ config AMD_MEM_ENCRYPT config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT bool "Activate AMD Secure Memory Encryption (SME) by default" - default y depends on AMD_MEM_ENCRYPT help Say yes to have system memory encrypted by default if running on
arch/x86/kernel/cpu/resctrl/core.c +2 -0
@@ -590,6 +590,8 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r) }if (r->mon_capable &&domain_setup_mon_state (r, d)) { +kfree (d->ctrl_val); +kfree (d->mbps_val);kfree (d);return ; }
arch/x86/kernel/fpu/signal.c +1 -1
@@ -385,7 +385,7 @@ static int __fpu_restore_sig(void __user *buf, void __user *buf_fx,return -EINVAL ; }else {/* Mask invalid bits out for historical reasons (broken hardware). */ - fpu->state.fxsave.mxcsr &= ~mxcsr_feature_mask; + fpu->state.fxsave.mxcsr &= mxcsr_feature_mask; }/* Enforce XFEATURE_MASK_FPSSE when XSAVE is enabled */
drivers/acpi/arm64/gtdt.c +1 -1
@@ -36,7 +36,7 @@ struct acpi_gtdt_descriptor {static struct acpi_gtdt_descriptor acpi_gtdt_desc__initdata ; -static inline void *next_platform_timer (void *platform_timer) +static inline __init void *next_platform_timer (void *platform_timer) {struct acpi_gtdt_header *gh = platform_timer;
drivers/acpi/x86/s2idle.c +2 -1
@@ -371,7 +371,7 @@ static int lps0_device_attach(struct acpi_device *adev,return 0 ;if (acpi_s2idle_vendor_amd ()) { -/* AMD0004, AMDI0005: +/* AMD0004, AMD0005, AMDI0005: * - Should use rev_id 0x0 * - function mask > 0x3: Should use AMD method, but has off by one bug * - function mask = 0x3: Should use Microsoft method
@@ -390,6 +390,7 @@ static int lps0_device_attach(struct acpi_device *adev,ACPI_LPS0_DSM_UUID_MICROSOFT ,0 , &lps0_dsm_guid_microsoft);if (lps0_dsm_func_mask >0x3 && (!strcmp (hid,"AMD0004" ) || + !strcmp (hid,"AMD0005" ) || !strcmp (hid,"AMDI0005" ))) { lps0_dsm_func_mask = (lps0_dsm_func_mask <<1 ) |0x1 ; acpi_handle_debug(adev->handle, "_DSM UUID %s: Adjusted function mask: 0x%x\n",
drivers/ata/libahci_platform.c +1 -4
@@ -440,10 +440,7 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, hpriv->phy_regulator =devm_regulator_get (dev,"phy" );if (IS_ERR (hpriv->phy_regulator)) { rc =PTR_ERR (hpriv->phy_regulator); -if (rc == -EPROBE_DEFER ) - goto err_out; - rc =0 ; - hpriv->phy_regulator =NULL ; + goto err_out; }if (flags &AHCI_PLATFORM_GET_RESETS ) {
drivers/ata/pata_legacy.c +4 -2
@@ -352,7 +352,8 @@ static unsigned int pdc_data_xfer_vlb(struct ata_queued_cmd *qc,iowrite32_rep (ap->ioaddr.data_addr, buf, buflen >>2 );if (unlikely (slop)) { -__le32 pad; +__le32 pad =0 ; +if (rw ==READ ) { pad =cpu_to_le32 (ioread32 (ap->ioaddr.data_addr));memcpy (buf + buflen - slop, &pad, slop);
@@ -742,7 +743,8 @@ static unsigned int vlb32_data_xfer(struct ata_queued_cmd *qc,ioread32_rep (ap->ioaddr.data_addr, buf, buflen >>2 );if (unlikely (slop)) { -__le32 pad; +__le32 pad =0 ; +if (rw ==WRITE ) {memcpy (&pad, buf + buflen - slop, slop);iowrite32 (le32_to_cpu (pad), ap->ioaddr.data_addr);
drivers/base/core.c +2 -1
@@ -675,7 +675,8 @@ struct device_link *device_link_add(struct device *consumer, {struct device_link *link; - if (!consumer || !supplier || flags & ~DL_ADD_VALID_FLAGS || + if (!consumer || !supplier || consumer == supplier || + flags & ~DL_ADD_VALID_FLAGS || (flags & DL_FLAG_STATELESS && flags & DL_MANAGED_LINK_FLAGS) || (flags & DL_FLAG_SYNC_STATE_ONLY && (flags & ~DL_FLAG_INFERRED) != DL_FLAG_SYNC_STATE_ONLY) ||
drivers/block/rnbd/rnbd-clt-sysfs.c +3 -1
@@ -71,8 +71,10 @@ static int rnbd_clt_parse_map_options(const char *buf, size_t max_path_cnt,int opt_mask =0 ;int token;int ret = -EINVAL ; -int i, dest_port, nr_poll_queues; +int nr_poll_queues =0 ; +int dest_port =0 ;int p_cnt =0 ; +int i; options =kstrdup (buf,GFP_KERNEL );if (!options)
drivers/block/virtio_blk.c +7 -34
77 lines not on this page · raw message
drivers/bus/simple-pm-bus.c +39 -3
64 lines not on this page · raw message
drivers/clk/renesas/renesas-rzg2l-cpg.c +1 -1
@@ -398,7 +398,7 @@ static int rzg2l_mod_clock_is_enabled(struct clk_hw *hw) value =readl (priv->base +CLK_MON_R (clock->off)); -return !(value & bitmask); +return value & bitmask; }static const struct clk_ops rzg2l_mod_clock_ops = {
drivers/clk/socfpga/clk-agilex.c +0 -9
@@ -165,13 +165,6 @@ static const struct clk_parent_data mpu_mux[] = { .name = "boot_clk", }, }; -static const struct clk_parent_data s2f_usr0_mux[] = { - { .fw_name ="f2s-free-clk" , - .name ="f2s-free-clk" , }, - { .fw_name ="boot_clk" , - .name ="boot_clk" , }, -}; -static const struct clk_parent_data emac_mux[] = { { .fw_name ="emaca_free_clk" , .name = "emaca_free_clk", },
@@ -312,8 +305,6 @@ static const struct stratix10_gate_clock agilex_gate_clks[] = { 4, 0x44, 28, 1, 0, 0, 0}, {AGILEX_CS_TIMER_CLK ,"cs_timer_clk" ,NULL , noc_mux,ARRAY_SIZE (noc_mux),0 ,0x24 , 5, 0, 0, 0, 0x30, 1, 0}, - { AGILEX_S2F_USER0_CLK, "s2f_user0_clk", NULL, s2f_usr0_mux, ARRAY_SIZE(s2f_usr0_mux), 0, 0x24, - 6, 0, 0, 0, 0, 0, 0}, { AGILEX_EMAC0_CLK, "emac0_clk", NULL, emac_mux, ARRAY_SIZE(emac_mux), 0, 0x7C, 0, 0, 0, 0, 0x94, 26, 0}, { AGILEX_EMAC1_CLK, "emac1_clk", NULL, emac_mux, ARRAY_SIZE(emac_mux), 0, 0x7C,
drivers/edac/armada_xp_edac.c +1 -1
@@ -178,7 +178,7 @@ static void axp_mc_check(struct mem_ctl_info *mci) "details unavailable (multiple errors)");if (cnt_dbe) edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, - cnt_sbe, /* error count */ + cnt_dbe, /* error count */ 0, 0, 0, /* pfn, offset, syndrome */ -1, -1, -1, /* top, mid, low layer */ mci->ctl_name,
drivers/firmware/arm_ffa/bus.c +11 -1
@@ -49,6 +49,15 @@ static int ffa_device_probe(struct device *dev)return ffa_drv->probe (ffa_dev); } +static int ffa_device_remove (struct device *dev) +{ +struct ffa_driver *ffa_drv =to_ffa_driver (dev->driver); + + ffa_drv->remove (to_ffa_dev (dev)); + +return 0 ; +} +static int ffa_device_uevent (struct device *dev,struct kobj_uevent_env *env) {struct ffa_device *ffa_dev =to_ffa_dev (dev);
@@ -86,6 +95,7 @@ struct bus_type ffa_bus_type = { .name = "arm_ffa", .match = ffa_device_match, .probe = ffa_device_probe, + .remove = ffa_device_remove, .uevent = ffa_device_uevent, .dev_groups = ffa_device_attributes_groups, };
@@ -127,7 +137,7 @@ static void ffa_release_device(struct device *dev)static int __ffa_devices_unregister (struct device *dev,void *data) { -ffa_release_device (dev); +device_unregister (dev);return 0 ; }
drivers/firmware/efi/cper.c +2 -2
@@ -25,8 +25,6 @@#include <acpi/ghes.h> #include <ras/ras_event.h> -static char rcd_decode_str[CPER_REC_LEN ]; -/* * CPER record ID need to be unique even after reboot, because record * ID is used as index for ERST storage, while CPER records from
@@ -313,6 +311,7 @@ const char *cper_mem_err_unpack(struct trace_seq *p, struct cper_mem_err_compact *cmem) {const char *ret =trace_seq_buffer_ptr (p); +char rcd_decode_str[CPER_REC_LEN ];if (cper_mem_err_location (cmem, rcd_decode_str))trace_seq_printf (p,"%s" , rcd_decode_str);
@@ -327,6 +326,7 @@ static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem, int len) {struct cper_mem_err_compact cmem; +char rcd_decode_str[CPER_REC_LEN ];/* Don't trust UEFI 2.1/2.2 structure with bad validation bits */ if (len == sizeof(struct cper_sec_mem_err_old) &&
drivers/firmware/efi/runtime-wrappers.c +1 -1
@@ -414,7 +414,7 @@ static void virt_efi_reset_system(int reset_type, unsigned long data_size, efi_char16_t *data) { -if (down_interruptible (&efi_runtime_lock)) { +if (down_trylock (&efi_runtime_lock)) {pr_warn ("failed to invoke the reset_system() runtime service:\n" "could not get exclusive access to the firmware\n" );return ;
drivers/fpga/ice40-spi.c +7 -0
@@ -192,12 +192,19 @@ static const struct of_device_id ice40_fpga_of_match[] = { };MODULE_DEVICE_TABLE (of, ice40_fpga_of_match); +static const struct spi_device_id ice40_fpga_spi_ids[] = { + { .name ="ice40-fpga-mgr" , }, + {}, +}; +MODULE_DEVICE_TABLE (spi, ice40_fpga_spi_ids); +static struct spi_driver ice40_fpga_driver = { .probe = ice40_fpga_probe, .driver = { .name ="ice40spi" , .of_match_table =of_match_ptr (ice40_fpga_of_match), }, + .id_table = ice40_fpga_spi_ids, };module_spi_driver (ice40_fpga_driver);
drivers/gpio/gpio-74x164.c +8 -0
@@ -174,6 +174,13 @@ static int gen_74x164_remove(struct spi_device *spi)return 0 ; } +static const struct spi_device_id gen_74x164_spi_ids[] = { + { .name ="74hc595" }, + { .name ="74lvc594" }, + {}, +}; +MODULE_DEVICE_TABLE (spi, gen_74x164_spi_ids); +static const struct of_device_id gen_74x164_dt_ids[] = { { .compatible ="fairchild,74hc595" }, { .compatible ="nxp,74lvc594" },
@@ -188,6 +195,7 @@ static struct spi_driver gen_74x164_driver = { }, .probe = gen_74x164_probe, .remove = gen_74x164_remove, + .id_table = gen_74x164_spi_ids, };module_spi_driver (gen_74x164_driver);
drivers/gpio/gpio-pca953x.c +9 -7
@@ -559,21 +559,21 @@ static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,mutex_lock (&chip->i2c_lock); -/* Disable pull-up/pull-down */ - ret =regmap_write_bits (chip->regmap, pull_en_reg, bit,0 ); -if (ret) - goto exit; -/* Configure pull-up/pull-down */ if (config ==PIN_CONFIG_BIAS_PULL_UP ) ret =regmap_write_bits (chip->regmap, pull_sel_reg, bit, bit);else if (config ==PIN_CONFIG_BIAS_PULL_DOWN ) ret =regmap_write_bits (chip->regmap, pull_sel_reg, bit,0 ); +else + ret =0 ;if (ret) goto exit; -/* Enable pull-up/pull-down */ - ret =regmap_write_bits (chip->regmap, pull_en_reg, bit, bit); +/* Disable/Enable pull-up/pull-down */ +if (config ==PIN_CONFIG_BIAS_DISABLE ) + ret =regmap_write_bits (chip->regmap, pull_en_reg, bit,0 ); +else + ret =regmap_write_bits (chip->regmap, pull_en_reg, bit, bit); exit:mutex_unlock (&chip->i2c_lock);
@@ -587,7 +587,9 @@ static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,switch (pinconf_to_config_param (config)) {case PIN_CONFIG_BIAS_PULL_UP : +case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT :case PIN_CONFIG_BIAS_PULL_DOWN : +case PIN_CONFIG_BIAS_DISABLE :return pca953x_gpio_set_pull_up_down (chip, offset, config);default :return -ENOTSUPP ;
drivers/gpu/drm/drm_edid.c +12 -3
@@ -1834,11 +1834,20 @@ static void connector_bad_edid(struct drm_connector *connector, u8 *edid, int num_blocks) { int i; -u8 num_of_ext = edid[0x7e ]; +u8 last_block; + +/* +* 0x7e in the EDID is the number of extension blocks. The EDID +* is 1 (base block) + num_ext_blocks big. That means we can think +* of 0x7e in the EDID of the _index_ of the last block in the +* combined chunk of memory. +*/ + last_block = edid[0x7e ];/* Calculate real checksum for the last edid extension block data */ - connector->real_edid_checksum = -drm_edid_block_checksum (edid + num_of_ext *EDID_LENGTH ); +if (last_block < num_blocks) + connector->real_edid_checksum = +drm_edid_block_checksum (edid + last_block *EDID_LENGTH );if (connector->bad_edid_counter++ && !drm_debug_enabled (DRM_UT_KMS ))return ;
drivers/gpu/drm/drm_fb_helper.c +6 -0
@@ -1506,6 +1506,7 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, {struct drm_client_dev *client = &fb_helper->client;struct drm_device *dev = fb_helper->dev; +struct drm_mode_config *config = &dev->mode_config;int ret =0 ;int crtc_count =0 ;struct drm_connector_list_iter conn_iter;
@@ -1663,6 +1664,11 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,/* Handle our overallocation */ sizes.surface_height *= drm_fbdev_overalloc; sizes.surface_height /=100 ; +if (sizes.surface_height > config->max_height) { +drm_dbg_kms (dev,"Fbdev over-allocation too large; clamping height to %d\n" , + config->max_height); + sizes.surface_height = config->max_height; + }/* push down into drivers */ ret = (*fb_helper->funcs->fb_probe)(fb_helper, &sizes);
drivers/gpu/drm/msm/adreno/a3xx_gpu.c +5 -4
@@ -571,13 +571,14 @@ struct msm_gpu *a3xx_gpu_init(struct drm_device *dev) } icc_path =devm_of_icc_get (&pdev->dev,"gfx-mem" ); - ret =IS_ERR (icc_path); -if (ret) +if (IS_ERR (icc_path)) { + ret =PTR_ERR (icc_path); goto fail; + } ocmem_icc_path =devm_of_icc_get (&pdev->dev,"ocmem" ); - ret =IS_ERR (ocmem_icc_path); -if (ret) { +if (IS_ERR (ocmem_icc_path)) { + ret =PTR_ERR (ocmem_icc_path);/* allow -ENODATA, ocmem icc is optional */ if (ret != -ENODATA ) goto fail;
drivers/gpu/drm/msm/adreno/a4xx_gpu.c +5 -4
@@ -699,13 +699,14 @@ struct msm_gpu *a4xx_gpu_init(struct drm_device *dev) } icc_path =devm_of_icc_get (&pdev->dev,"gfx-mem" ); - ret =IS_ERR (icc_path); -if (ret) +if (IS_ERR (icc_path)) { + ret =PTR_ERR (icc_path); goto fail; + } ocmem_icc_path =devm_of_icc_get (&pdev->dev,"ocmem" ); - ret =IS_ERR (ocmem_icc_path); -if (ret) { +if (IS_ERR (ocmem_icc_path)) { + ret =PTR_ERR (ocmem_icc_path);/* allow -ENODATA, ocmem icc is optional */ if (ret != -ENODATA ) goto fail;
drivers/gpu/drm/msm/adreno/a6xx_gpu.c +3 -3
@@ -102,7 +102,7 @@ static void a6xx_set_pagetable(struct a6xx_gpu *a6xx_gpu,u32 asid;u64 memptr =rbmemptr (ring, ttbr0); -if (ctx == a6xx_gpu->cur_ctx) +if (ctx->seqno == a6xx_gpu->cur_ctx_seqno)return ;if (msm_iommu_pagetable_params (ctx->aspace->mmu, &ttbr, &asid))
@@ -135,7 +135,7 @@ static void a6xx_set_pagetable(struct a6xx_gpu *a6xx_gpu,OUT_PKT7 (ring,CP_EVENT_WRITE ,1 );OUT_RING (ring,0x31 ); - a6xx_gpu->cur_ctx = ctx; + a6xx_gpu->cur_ctx_seqno = ctx->seqno; }static void a6xx_submit (struct msm_gpu *gpu,struct msm_gem_submit *submit)
@@ -1053,7 +1053,7 @@ static int a6xx_hw_init(struct msm_gpu *gpu)/* Always come up on rb 0 */ a6xx_gpu->cur_ring = gpu->rb[0 ]; - a6xx_gpu->cur_ctx =NULL ; + a6xx_gpu->cur_ctx_seqno =0 ;/* Enable the SQE_to start the CP engine */ gpu_write (gpu,REG_A6XX_CP_SQE_CNTL ,1 );
drivers/gpu/drm/msm/adreno/a6xx_gpu.h +10 -1
@@ -19,7 +19,16 @@ struct a6xx_gpu {uint64_t sqe_iova;struct msm_ringbuffer *cur_ring; -struct msm_file_private *cur_ctx; + +/** +* cur_ctx_seqno: +* +* The ctx->seqno value of the context with current pgtables +* installed. Tracked by seqno rather than pointer value to +* avoid dangling pointers, and cases where a ctx can be freed +* and a new one created with the same address. +*/ +int cur_ctx_seqno;struct a6xx_gmu gmu;
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c +16 -0
@@ -1125,6 +1125,20 @@ static void mdp5_crtc_reset(struct drm_crtc *crtc)__drm_atomic_helper_crtc_reset (crtc, &mdp5_cstate->base); } +static const struct drm_crtc_funcs mdp5_crtc_no_lm_cursor_funcs = { + .set_config = drm_atomic_helper_set_config, + .destroy = mdp5_crtc_destroy, + .page_flip = drm_atomic_helper_page_flip, + .reset = mdp5_crtc_reset, + .atomic_duplicate_state = mdp5_crtc_duplicate_state, + .atomic_destroy_state = mdp5_crtc_destroy_state, + .atomic_print_state = mdp5_crtc_atomic_print_state, + .get_vblank_counter = mdp5_crtc_get_vblank_counter, + .enable_vblank = msm_crtc_enable_vblank, + .disable_vblank = msm_crtc_disable_vblank, + .get_vblank_timestamp = drm_crtc_vblank_helper_get_vblank_timestamp, +}; +static const struct drm_crtc_funcs mdp5_crtc_funcs = { .set_config = drm_atomic_helper_set_config, .destroy = mdp5_crtc_destroy,
@@ -1313,6 +1327,8 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev, mdp5_crtc->lm_cursor_enabled = cursor_plane ? false : true;drm_crtc_init_with_planes (dev, crtc, plane, cursor_plane, + cursor_plane ? + &mdp5_crtc_no_lm_cursor_funcs : &mdp5_crtc_funcs,NULL ); drm_flip_work_init(&mdp5_crtc->unref_cursor_work,
drivers/gpu/drm/msm/dsi/dsi.c +3 -1
@@ -208,8 +208,10 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, goto fail; } -if (!msm_dsi_manager_validate_current_config (msm_dsi->id)) +if (!msm_dsi_manager_validate_current_config (msm_dsi->id)) { + ret = -EINVAL ; goto fail; + } msm_dsi->encoder = encoder;
drivers/gpu/drm/msm/dsi/dsi_host.c +1 -1
@@ -463,7 +463,7 @@ static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host)return 0 ; err: -for (; i >0 ; i--) +while (--i >=0 )clk_disable_unprepare (msm_host->bus_clks[i]);return ret;
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +15 -15
@@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];static bool pll_14nm_poll_for_ready (struct dsi_pll_14nm *pll_14nm,u32 nb_tries,u32 timeout_us) { -bool pll_locked = false; +bool pll_locked = false, pll_ready = false;void __iomem *base = pll_14nm->phy->pll_base;u32 tries, val; tries = nb_tries;while (tries--) { - val =dsi_phy_read (base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + val =dsi_phy_read (base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); pll_locked = !!(val &BIT (5 ));if (pll_locked)
@@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,udelay (timeout_us); } -if (!pll_locked) { - tries = nb_tries; -while (tries--) { - val =dsi_phy_read (base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); - pll_locked = !!(val &BIT (0 )); +if (!pll_locked) + goto out; -if (pll_locked) -break ; + tries = nb_tries; +while (tries--) { + val =dsi_phy_read (base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + pll_ready = !!(val &BIT (0 )); -udelay (timeout_us); - } +if (pll_ready) +break ; + +udelay (timeout_us); } -DBG ("DSI PLL is %slocked" , pll_locked ?"" :"*not* " ); +out: +DBG ("DSI PLL is %slocked, %sready" , pll_locked ?"" :"*not* " , pll_ready ?"" :"*not* " ); -return pll_locked; +return pll_locked && pll_ready; }static void dsi_pll_14nm_config_init (struct dsi_pll_config *pconf)
drivers/gpu/drm/msm/edp/edp_ctrl.c +2 -1
@@ -1116,7 +1116,7 @@ void msm_edp_ctrl_power(struct edp_ctrl *ctrl, bool on)int msm_edp_ctrl_init (struct msm_edp *edp) {struct edp_ctrl *ctrl =NULL ; -struct device *dev = &edp->pdev->dev; +struct device *dev;int ret;if (!edp) {
@@ -1124,6 +1124,7 @@ int msm_edp_ctrl_init(struct msm_edp *edp)return -EINVAL ; } + dev = &edp->pdev->dev; ctrl =devm_kzalloc (dev,sizeof (*ctrl),GFP_KERNEL );if (!ctrl)return -ENOMEM ;
drivers/gpu/drm/msm/msm_drv.c +8 -4
@@ -566,10 +566,11 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv)if (ret) goto err_msm_uninit; - ret =msm_disp_snapshot_init (ddev); -if (ret) -DRM_DEV_ERROR (dev,"msm_disp_snapshot_init failed ret = %d\n" , ret); - +if (kms) { + ret =msm_disp_snapshot_init (ddev); +if (ret) +DRM_DEV_ERROR (dev,"msm_disp_snapshot_init failed ret = %d\n" , ret); + }drm_mode_config_reset (ddev);#ifdef CONFIG_DRM_FBDEV_EMULATION
@@ -618,6 +619,7 @@ static void load_gpu(struct drm_device *dev)static int context_init (struct drm_device *dev,struct drm_file *file) { +static atomic_t ident =ATOMIC_INIT (0 );struct msm_drm_private *priv = dev->dev_private;struct msm_file_private *ctx;
@@ -631,6 +633,8 @@ static int context_init(struct drm_device *dev, struct drm_file *file) ctx->aspace =msm_gpu_create_private_address_space (priv->gpu, current); file->driver_priv = ctx; + ctx->seqno =atomic_inc_return (&ident); +return 0 ; }
drivers/gpu/drm/msm/msm_drv.h +3 -2
@@ -59,6 +59,7 @@ struct msm_file_private {int queueid;struct msm_gem_address_space *aspace;struct kref ref; +int seqno; };enum msm_mdp_plane_property {
@@ -535,7 +536,7 @@ static inline int align_pitch(int width, int bpp)static inline unsigned long timeout_to_jiffies (const ktime_t *timeout) {ktime_t now =ktime_get (); -unsigned long remaining_jiffies; +s64 remaining_jiffies;if (ktime_compare (*timeout, now) <0 ) { remaining_jiffies =0 ;
@@ -544,7 +545,7 @@ static inline unsigned long timeout_to_jiffies(const ktime_t *timeout) remaining_jiffies = ktime_divns(rem, NSEC_PER_SEC / HZ); } -return remaining_jiffies; +return clamp (remaining_jiffies,0LL , (s64 )INT_MAX ); }#endif /* __MSM_DRV_H__ */
drivers/gpu/drm/msm/msm_gem_submit.c +2 -1
@@ -161,7 +161,8 @@ static int submit_lookup_objects(struct msm_gem_submit *submit,static int submit_lookup_cmds (struct msm_gem_submit *submit,struct drm_msm_gem_submit *args,struct drm_file *file) { -unsigned i, sz; +unsigned i; +size_t sz;int ret =0 ;for (i =0 ; i < args->nr_cmds; i++) {
drivers/gpu/drm/nouveau/nvkm/engine/fifo/chang84.c +1 -1
@@ -82,7 +82,7 @@ g84_fifo_chan_engine_fini(struct nvkm_fifo_chan *base,if (offset <0 )return 0 ; - engn = fifo->base.func->engine_id (&fifo->base, engine); + engn = fifo->base.func->engine_id (&fifo->base, engine) -1 ; save =nvkm_mask (device,0x002520 ,0x0000003f ,1 << engn);nvkm_wr32 (device,0x0032fc , chan->base.inst->addr >>12 ); done = nvkm_msec(device, 2000,
drivers/gpu/drm/panel/Kconfig +1 -0
@@ -273,6 +273,7 @@ config DRM_PANEL_OLIMEX_LCD_OLINUXINO depends on OF depends on I2C depends on BACKLIGHT_CLASS_DEVICE + select CRC32 help The panel is used with different sizes LCDs, from 480x272 to 1280x800, and 24 bit per pixel.
drivers/iio/accel/fxls8962af-core.c +1 -1
@@ -738,7 +738,7 @@ static irqreturn_t fxls8962af_interrupt(int irq, void *p)if (reg &FXLS8962AF_INT_STATUS_SRC_BUF ) { ret =fxls8962af_fifo_flush (indio_dev); -if (ret) +if (ret <0 )return IRQ_NONE ;return IRQ_HANDLED ;
drivers/iio/adc/ad7192.c +1 -0
@@ -293,6 +293,7 @@ static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { .has_registers = true, .addr_shift = 3, .read_mask = BIT(6), + .irq_flags = IRQF_TRIGGER_FALLING, };static const struct ad_sd_calib_data ad7192_calib_arr[8 ] = {
drivers/iio/adc/ad7780.c +1 -1
@@ -203,7 +203,7 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = { .set_mode = ad7780_set_mode, .postprocess_sample = ad7780_postprocess_sample, .has_registers = false, - .irq_flags = IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_FALLING, };#define _AD7780_CHANNEL (_bits, _wordsize, _mask_all) \
drivers/iio/adc/ad7793.c +1 -1
@@ -206,7 +206,7 @@ static const struct ad_sigma_delta_info ad7793_sigma_delta_info = { .has_registers = true, .addr_shift = 3, .read_mask = BIT(6), - .irq_flags = IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_FALLING, };static const struct ad_sd_calib_data ad7793_calib_arr[6 ] = {
drivers/iio/adc/aspeed_adc.c +1 -0
@@ -183,6 +183,7 @@ static int aspeed_adc_probe(struct platform_device *pdev) data =iio_priv (indio_dev); data->dev = &pdev->dev; +platform_set_drvdata (pdev, indio_dev); data->base =devm_platform_ioremap_resource (pdev,0 );if (IS_ERR (data->base))
drivers/iio/adc/max1027.c +1 -2
@@ -103,7 +103,7 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); .sign = 'u', \ .realbits = depth, \ .storagebits = 16, \ - .shift = 2, \ + .shift = (depth == 10) ? 2 : 0, \ .endianness = IIO_BE, \ }, \ }
@@ -142,7 +142,6 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); MAX1027_V_CHAN(11, depth)#define MAX1X31_CHANNELS (depth) \ - MAX1X27_CHANNELS(depth), \ MAX1X29_CHANNELS(depth), \ MAX1027_V_CHAN(12, depth), \ MAX1027_V_CHAN(13, depth), \
drivers/iio/adc/mt6577_auxadc.c +8 -0
@@ -82,6 +82,10 @@ static const struct iio_chan_spec mt6577_auxadc_iio_channels[] = { MT6577_AUXADC_CHANNEL(15), }; +/* For Voltage calculation */ +#define VOLTAGE_FULL_RANGE 1500/* VA voltage */ +#define AUXADC_PRECISE 4096/* 12 bits */ +static int mt_auxadc_get_cali_data (int rawdata,bool enable_cali) {return rawdata;
@@ -191,6 +195,10 @@ static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev, }if (adc_dev->dev_comp->sample_data_cali) *val =mt_auxadc_get_cali_data (*val, true); + +/* Convert adc raw data to voltage: 0 - 1500 mV */ + *val = *val *VOLTAGE_FULL_RANGE /AUXADC_PRECISE ; +return IIO_VAL_INT ;default :
drivers/iio/adc/ti-adc128s052.c +6 -0
@@ -171,7 +171,13 @@ static int adc128_probe(struct spi_device *spi)mutex_init (&adc->lock); ret =iio_device_register (indio_dev); +if (ret) + goto err_disable_regulator; +return 0 ; + +err_disable_regulator: +regulator_disable (adc->reg);return ret; }
drivers/iio/common/ssp_sensors/ssp_spi.c +9 -2
@@ -137,7 +137,7 @@ static int ssp_print_mcu_debug(char *data_frame, int *data_index,if (length > received_len - *data_index || length <=0 ) {ssp_dbg ("[SSP]: MSG From MCU-invalid debug length(%d/%d)\n" , length, received_len); -return length ? length : -EPROTO ; +return -EPROTO ; }ssp_dbg ("[SSP]: MSG From MCU - %s\n" , &data_frame[*data_index]);
@@ -273,6 +273,8 @@ static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len)for (idx =0 ; idx < len;) {switch (dataframe[idx++]) {case SSP_MSG2AP_INST_BYPASS_DATA : +if (idx >= len) +return -EPROTO ; sd = dataframe[idx++];if (sd <0 || sd >=SSP_SENSOR_MAX ) { dev_err(SSP_DEV,
@@ -282,10 +284,13 @@ static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len)if (indio_devs[sd]) { spd =iio_priv (indio_devs[sd]); -if (spd->process_data) +if (spd->process_data) { +if (idx >= len) +return -EPROTO ; spd->process_data (indio_devs[sd], &dataframe[idx], data->timestamp); + } }else {dev_err (SSP_DEV ,"no client for frame\n" ); }
@@ -293,6 +298,8 @@ static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len) idx += ssp_offset_map[sd];break ;case SSP_MSG2AP_INST_DEBUG_DATA : +if (idx >= len) +return -EPROTO ; sd =ssp_print_mcu_debug (dataframe, &idx, len);if (sd) { dev_err(SSP_DEV,
drivers/iio/dac/ti-dac5571.c +1 -0
@@ -350,6 +350,7 @@ static int dac5571_probe(struct i2c_client *client, data->dac5571_pwrdwn = dac5571_pwrdwn_quad;break ;default : + ret = -EINVAL ; goto err; }
drivers/iio/imu/adis16475.c +2 -1
@@ -353,10 +353,11 @@ static int adis16475_set_freq(struct adis16475 *st, const u32 freq)if (dec > st->info->max_dec) dec = st->info->max_dec; - ret =adis_write_reg_16 (&st->adis,ADIS16475_REG_DEC_RATE , dec); + ret =__adis_write_reg_16 (&st->adis,ADIS16475_REG_DEC_RATE , dec);if (ret) goto error; +adis_dev_unlock (&st->adis);/* * If decimation is used, then gyro and accel data will have meaningful * bits on the LSB registers. This info is used on the trigger handler.
drivers/iio/imu/adis16480.c +11 -3
@@ -144,6 +144,7 @@ struct adis16480_chip_info {unsigned int max_dec_rate;const unsigned int *filter_freqs;bool has_pps_clk_mode; +bool has_sleep_cnt;const struct adis_data adis_data; };
@@ -939,6 +940,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .temp_scale = 5650, /* 5.65 milli degree Celsius */ .int_clk = 2460000, .max_dec_rate = 2048, + .has_sleep_cnt = true, .filter_freqs = adis16480_def_filter_freqs, .adis_data = ADIS16480_DATA(16375, &adis16485_timeouts, 0), },
@@ -952,6 +954,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .temp_scale = 5650, /* 5.65 milli degree Celsius */ .int_clk = 2460000, .max_dec_rate = 2048, + .has_sleep_cnt = true, .filter_freqs = adis16480_def_filter_freqs, .adis_data = ADIS16480_DATA(16480, &adis16480_timeouts, 0), },
@@ -965,6 +968,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .temp_scale = 5650, /* 5.65 milli degree Celsius */ .int_clk = 2460000, .max_dec_rate = 2048, + .has_sleep_cnt = true, .filter_freqs = adis16480_def_filter_freqs, .adis_data = ADIS16480_DATA(16485, &adis16485_timeouts, 0), },
@@ -978,6 +982,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .temp_scale = 5650, /* 5.65 milli degree Celsius */ .int_clk = 2460000, .max_dec_rate = 2048, + .has_sleep_cnt = true, .filter_freqs = adis16480_def_filter_freqs, .adis_data = ADIS16480_DATA(16488, &adis16485_timeouts, 0), },
@@ -1425,9 +1430,12 @@ static int adis16480_probe(struct spi_device *spi)if (ret)return ret; - ret =devm_add_action_or_reset (&spi->dev, adis16480_stop, indio_dev); -if (ret) -return ret; +if (st->chip_info->has_sleep_cnt) { + ret =devm_add_action_or_reset (&spi->dev, adis16480_stop, + indio_dev); +if (ret) +return ret; + } ret =adis16480_config_irq_pin (spi->dev.of_node, st);if (ret)
drivers/iio/light/opt3001.c +3 -3
@@ -276,6 +276,8 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2) ret =wait_event_timeout (opt->result_ready_queue, opt->result_ready,msecs_to_jiffies (OPT3001_RESULT_READY_LONG )); +if (ret ==0 ) +return -ETIMEDOUT ; }else {/* Sleep for result ready time */ timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ?
@@ -312,9 +314,7 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)/* Disallow IRQ to access the device while lock is active */ opt->ok_to_ignore_lock = false; -if (ret ==0 ) -return -ETIMEDOUT ; -else if (ret <0 ) +if (ret <0 )return ret;if (opt->use_irq) {
drivers/input/joystick/xpad.c +2 -0
@@ -334,6 +334,7 @@ static const struct xpad_device { { 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 }, { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
@@ -451,6 +452,7 @@ static const struct usb_device_id xpad_table[] = {XPAD_XBOXONE_VENDOR (0x24c6 ),/* PowerA Controllers */ XPAD_XBOXONE_VENDOR (0x2e24 ),/* Hyperkin Duke X-Box One pad */ XPAD_XBOX360_VENDOR (0x2f24 ),/* GameSir Controllers */ + XPAD_XBOX360_VENDOR(0x3285), /* Nacon GC-100 */ { } };
drivers/input/touchscreen/resistive-adc-touch.c +16 -13
@@ -71,19 +71,22 @@ static int grts_cb(const void *data, void *private)unsigned int z2 = touch_info[st->ch_map[GRTS_CH_Z2 ]];unsigned int Rt; - Rt = z2; - Rt -= z1; - Rt *= st->x_plate_ohms; - Rt =DIV_ROUND_CLOSEST (Rt,16 ); - Rt *= x; - Rt /= z1; - Rt =DIV_ROUND_CLOSEST (Rt,256 ); -/* -* On increased pressure the resistance (Rt) is decreasing -* so, convert values to make it looks as real pressure. -*/ -if (Rt <GRTS_DEFAULT_PRESSURE_MAX ) - press =GRTS_DEFAULT_PRESSURE_MAX - Rt; +if (likely (x && z1)) { + Rt = z2; + Rt -= z1; + Rt *= st->x_plate_ohms; + Rt =DIV_ROUND_CLOSEST (Rt,16 ); + Rt *= x; + Rt /= z1; + Rt =DIV_ROUND_CLOSEST (Rt,256 ); +/* +* On increased pressure the resistance (Rt) is +* decreasing so, convert values to make it looks as +* real pressure. +*/ +if (Rt <GRTS_DEFAULT_PRESSURE_MAX ) + press =GRTS_DEFAULT_PRESSURE_MAX - Rt; + } }if ((!x && !y) || (st->pressure && (press < st->pressure_min))) {
drivers/md/dm-rq.c +8 -0
@@ -490,6 +490,14 @@ static blk_status_t dm_mq_queue_rq(struct blk_mq_hw_ctx *hctx,struct mapped_device *md = tio->md;struct dm_target *ti = md->immutable_target; +/* +* blk-mq's unquiesce may come from outside events, such as +* elevator switch, updating nr_requests or others, and request may +* come during suspend, so simply ask for blk-mq to requeue it. +*/ +if (unlikely (test_bit (DMF_BLOCK_IO_FOR_SUSPEND , &md->flags))) +return BLK_STS_RESOURCE ; +if (unlikely (!ti)) {int srcu_idx;struct dm_table *map =dm_get_live_table (md, &srcu_idx);
drivers/md/dm.c +10 -7
@@ -492,18 +492,17 @@ static void start_io_acct(struct dm_io *io) false, 0, &io->stats_aux); } -static void end_io_acct (struct dm_io *io) +static void end_io_acct (struct mapped_device *md,struct bio *bio, +unsigned long start_time,struct dm_stats_aux *stats_aux) { -struct mapped_device *md = io->md; -struct bio *bio = io->orig_bio; -unsigned long duration = jiffies - io->start_time; +unsigned long duration = jiffies - start_time; -bio_end_io_acct (bio, io->start_time); +bio_end_io_acct (bio, start_time);if (unlikely (dm_stats_used (&md->stats)))dm_stats_account_io (&md->stats,bio_data_dir (bio), bio->bi_iter.bi_sector,bio_sectors (bio), - true, duration, &io->stats_aux); + true, duration, stats_aux);/* nudge anyone waiting on suspend queue */ if (unlikely (wq_has_sleeper (&md->wait)))
@@ -786,6 +785,8 @@ void dm_io_dec_pending(struct dm_io *io, blk_status_t error)blk_status_t io_error;struct bio *bio;struct mapped_device *md = io->md; +unsigned long start_time =0 ; +struct dm_stats_aux stats_aux;/* Push-back supersedes any I/O errors */ if (unlikely (error)) {
@@ -817,8 +818,10 @@ void dm_io_dec_pending(struct dm_io *io, blk_status_t error) } io_error = io->status; -end_io_acct (io); + start_time = io->start_time; + stats_aux = io->stats_aux;free_io (md, io); +end_io_acct (md, bio, start_time, &stats_aux);if (io_error ==BLK_STS_DM_REQUEUE )return ;
drivers/misc/cb710/sgbuf2.c +1 -1
@@ -47,7 +47,7 @@ static inline bool needs_unaligned_copy(const void *ptr)#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS return false;#else -return ((ptr -NULL ) &3 ) !=0 ; +return ((uintptr_t )ptr &3 ) !=0 ;#endif }
drivers/misc/eeprom/at25.c +8 -0
@@ -366,6 +366,13 @@ static const struct of_device_id at25_of_match[] = { };MODULE_DEVICE_TABLE (of, at25_of_match); +static const struct spi_device_id at25_spi_ids[] = { + { .name ="at25" ,}, + { .name ="fm25" ,}, + { } +}; +MODULE_DEVICE_TABLE (spi, at25_spi_ids); +static int at25_probe (struct spi_device *spi) {struct at25_data *at25 =NULL ;
@@ -491,6 +498,7 @@ static struct spi_driver at25_driver = { .dev_groups = sernum_groups, }, .probe = at25_probe, + .id_table = at25_spi_ids, };module_spi_driver (at25_driver);
drivers/misc/eeprom/eeprom_93xx46.c +18 -0
@@ -406,6 +406,23 @@ static const struct of_device_id eeprom_93xx46_of_table[] = { };MODULE_DEVICE_TABLE (of, eeprom_93xx46_of_table); +static const struct spi_device_id eeprom_93xx46_spi_ids[] = { + { .name ="eeprom-93xx46" , + .driver_data = (kernel_ulong_t)&at93c46_data, }, + { .name ="at93c46" , + .driver_data = (kernel_ulong_t)&at93c46_data, }, + { .name ="at93c46d" , + .driver_data = (kernel_ulong_t)&atmel_at93c46d_data, }, + { .name ="at93c56" , + .driver_data = (kernel_ulong_t)&at93c56_data, }, + { .name ="at93c66" , + .driver_data = (kernel_ulong_t)&at93c66_data, }, + { .name ="93lc46b" , + .driver_data = (kernel_ulong_t)µchip_93lc46b_data, }, + {} +}; +MODULE_DEVICE_TABLE (spi, eeprom_93xx46_spi_ids); +static int eeprom_93xx46_probe_dt (struct spi_device *spi) { const struct of_device_id *of_id =
@@ -555,6 +572,7 @@ static struct spi_driver eeprom_93xx46_driver = { }, .probe = eeprom_93xx46_probe, .remove = eeprom_93xx46_remove, + .id_table = eeprom_93xx46_spi_ids, };module_spi_driver (eeprom_93xx46_driver);
drivers/misc/fastrpc.c +2 -0
@@ -814,10 +814,12 @@ static int fastrpc_get_args(u32 kernel, struct fastrpc_invoke_ctx *ctx) rpra[i].pv = (u64 ) ctx->args[i].ptr; pages[i].addr = ctx->maps[i]->phys; +mmap_read_lock (current->mm); vma =find_vma (current->mm, ctx->args[i].ptr);if (vma) pages[i].addr += ctx->args[i].ptr - vma->vm_start; +mmap_read_unlock (current->mm); pg_start = (ctx->args[i].ptr &PAGE_MASK ) >>PAGE_SHIFT ; pg_end = ((ctx->args[i].ptr + len - 1) & PAGE_MASK) >>
drivers/misc/mei/hbm.c +8 -4
@@ -1298,7 +1298,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)if (dev->dev_state !=MEI_DEV_INIT_CLIENTS || dev->hbm_state !=MEI_HBM_STARTING ) { -if (dev->dev_state ==MEI_DEV_POWER_DOWN ) { +if (dev->dev_state ==MEI_DEV_POWER_DOWN || + dev->dev_state ==MEI_DEV_POWERING_DOWN ) {dev_dbg (dev->dev,"hbm: start: on shutdown, ignoring\n" );return 0 ; }
@@ -1381,7 +1382,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)if (dev->dev_state !=MEI_DEV_INIT_CLIENTS || dev->hbm_state !=MEI_HBM_DR_SETUP ) { -if (dev->dev_state ==MEI_DEV_POWER_DOWN ) { +if (dev->dev_state ==MEI_DEV_POWER_DOWN || + dev->dev_state ==MEI_DEV_POWERING_DOWN ) {dev_dbg (dev->dev,"hbm: dma setup response: on shutdown, ignoring\n" );return 0 ; }
@@ -1448,7 +1450,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)if (dev->dev_state !=MEI_DEV_INIT_CLIENTS || dev->hbm_state !=MEI_HBM_CLIENT_PROPERTIES ) { -if (dev->dev_state ==MEI_DEV_POWER_DOWN ) { +if (dev->dev_state ==MEI_DEV_POWER_DOWN || + dev->dev_state ==MEI_DEV_POWERING_DOWN ) {dev_dbg (dev->dev,"hbm: properties response: on shutdown, ignoring\n" );return 0 ; }
@@ -1490,7 +1493,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)if (dev->dev_state !=MEI_DEV_INIT_CLIENTS || dev->hbm_state !=MEI_HBM_ENUM_CLIENTS ) { -if (dev->dev_state ==MEI_DEV_POWER_DOWN ) { +if (dev->dev_state ==MEI_DEV_POWER_DOWN || + dev->dev_state ==MEI_DEV_POWERING_DOWN ) {dev_dbg (dev->dev,"hbm: enumeration response: on shutdown, ignoring\n" );return 0 ; }
drivers/misc/mei/hw-me-regs.h +1 -0
@@ -92,6 +92,7 @@#define MEI_DEV_ID_CDF 0x18D3/* Cedar Fork */ #define MEI_DEV_ID_ICP_LP 0x34E0/* Ice Lake Point LP */ +#define MEI_DEV_ID_ICP_N 0x38E0/* Ice Lake Point N */ #define MEI_DEV_ID_JSP_N 0x4DE0/* Jasper Lake Point N */
drivers/misc/mei/pci-me.c +1 -0
@@ -96,6 +96,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_ITOUCH_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_N, MEI_ME_PCH12_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH15_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_H, MEI_ME_PCH15_SPS_CFG)},
drivers/mtd/nand/raw/qcom_nandc.c +6 -2
@@ -1676,13 +1676,17 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,struct nand_ecc_ctrl *ecc = &chip->ecc;int data_size1, data_size2, oob_size1, oob_size2;int ret, reg_off =FLASH_BUF_ACC , read_loc =0 ; +int raw_cw = cw;nand_read_page_op (chip, page,0 ,NULL ,0 ); host->use_ecc = false; +if (nandc->props->qpic_v2) + raw_cw = ecc->steps -1 ; +clear_bam_transaction (nandc);set_address (host, host->cw_size * cw, page); -update_rw_regs (host,1 , true, cw); +update_rw_regs (host,1 , true, raw_cw);config_nand_page_read (chip); data_size1 = mtd->writesize - host->cw_size * (ecc->steps -1 );
@@ -1711,7 +1715,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,nandc_set_read_loc (chip, cw,3 , read_loc, oob_size2,1 ); } -config_nand_cw_read (chip, false, cw); +config_nand_cw_read (chip, false, raw_cw);read_data_dma (nandc, reg_off, data_buf, data_size1,0 ); reg_off += data_size1;
drivers/net/dsa/microchip/ksz_common.c +3 -1
@@ -449,8 +449,10 @@ EXPORT_SYMBOL(ksz_switch_register);void ksz_switch_remove (struct ksz_device *dev) {/* timer started */ -if (dev->mib_read_interval) +if (dev->mib_read_interval) { + dev->mib_read_interval =0 ;cancel_delayed_work_sync (&dev->mib_read); + } dev->dev_ops->exit (dev);dsa_unregister_switch (dev->ds);
drivers/net/dsa/mv88e6xxx/chip.c +11 -2
@@ -749,7 +749,11 @@ static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, ops = chip->info->ops;mv88e6xxx_reg_lock (chip); -if ((!mv88e6xxx_port_ppu_updates (chip, port) || +/* Internal PHYs propagate their configuration directly to the MAC. +* External PHYs depend on whether the PPU is enabled for this port. +*/ +if (((!mv88e6xxx_phy_is_internal (ds, port) && + !mv88e6xxx_port_ppu_updates (chip, port)) || mode ==MLO_AN_FIXED ) && ops->port_sync_link) err = ops->port_sync_link (chip, port, mode, false);mv88e6xxx_reg_unlock (chip);
@@ -772,7 +776,12 @@ static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, ops = chip->info->ops;mv88e6xxx_reg_lock (chip); -if (!mv88e6xxx_port_ppu_updates (chip, port) || mode ==MLO_AN_FIXED ) { +/* Internal PHYs propagate their configuration directly to the MAC. +* External PHYs depend on whether the PPU is enabled for this port. +*/ +if ((!mv88e6xxx_phy_is_internal (ds, port) && + !mv88e6xxx_port_ppu_updates (chip, port)) || + mode ==MLO_AN_FIXED ) {/* FIXME: for an automedia port, should we force the link * down here - what if the link comes up due to "other" media * while we're bringing the port up, how is the exclusivity
drivers/net/dsa/ocelot/felix.c +17 -8
@@ -271,12 +271,12 @@ static void felix_8021q_cpu_port_deinit(struct ocelot *ocelot, int port)*/ static int felix_setup_mmio_filtering (struct felix *felix) { -unsigned long user_ports =0 , cpu_ports =0 ; +unsigned long user_ports =dsa_user_ports (felix->ds);struct ocelot_vcap_filter *redirect_rule;struct ocelot_vcap_filter *tagging_rule;struct ocelot *ocelot = &felix->ocelot;struct dsa_switch *ds = felix->ds; -int port, ret; +int cpu =-1 , port, ret; tagging_rule =kzalloc (sizeof (struct ocelot_vcap_filter ),GFP_KERNEL );if (!tagging_rule)
@@ -289,12 +289,15 @@ static int felix_setup_mmio_filtering(struct felix *felix) }for (port =0 ; port < ocelot->num_phys_ports; port++) { -if (dsa_is_user_port (ds, port)) - user_ports |=BIT (port); -if (dsa_is_cpu_port (ds, port)) - cpu_ports |=BIT (port); +if (dsa_is_cpu_port (ds, port)) { + cpu = port; +break ; + } } +if (cpu <0 ) +return -EINVAL ; + tagging_rule->key_type =OCELOT_VCAP_KEY_ETYPE ; *(__be16 *)tagging_rule->key.etype.etype.value =htons (ETH_P_1588 ); *(__be16 *)tagging_rule->key.etype.etype.mask =htons (0xffff );
@@ -330,7 +333,7 @@ static int felix_setup_mmio_filtering(struct felix *felix)* the CPU port module */ redirect_rule->action.mask_mode =OCELOT_MASK_MODE_REDIRECT ; - redirect_rule->action.port_mask = cpu_ports; + redirect_rule->action.port_mask =BIT (cpu); }else {/* Trap PTP packets only to the CPU port module (which is * redirected to the NPI port)
@@ -1241,6 +1244,7 @@ static int felix_setup(struct dsa_switch *ds)* there's no real point in checking for errors. */ felix_set_tag_protocol (ds, port, felix->tag_proto); +break ; } ds->mtu_enforcement_ingress = true;
@@ -1277,6 +1281,7 @@ static void felix_teardown(struct dsa_switch *ds)continue ;felix_del_tag_protocol (ds, port, felix->tag_proto); +break ; }ocelot_devlink_sb_unregister (ocelot);
@@ -1406,8 +1411,12 @@ static void felix_txtstamp(struct dsa_switch *ds, int port,if (!ocelot->ptp)return ; -if (ocelot_port_txtstamp_request (ocelot, port, skb, &clone)) +if (ocelot_port_txtstamp_request (ocelot, port, skb, &clone)) { +dev_err_ratelimited (ds->dev, +"port %d delivering skb without TX timestamp\n" , + port);return ; + }if (clone)OCELOT_SKB_CB (skb)->clone = clone;
drivers/net/ethernet/Kconfig +1 -0
@@ -100,6 +100,7 @@ config JME config KORINA tristate "Korina (IDT RC32434) Ethernet support" depends on MIKROTIK_RB532 || COMPILE_TEST + select CRC32 select MII help If you have a Mikrotik RouterBoard 500 or IDT RC32434
drivers/net/ethernet/arc/Kconfig +1 -0
@@ -21,6 +21,7 @@ config ARC_EMAC_CORE depends on ARC || ARCH_ROCKCHIP || COMPILE_TEST select MII select PHYLIB + select CRC32 config ARC_EMAC tristate "ARC EMAC support"
drivers/net/ethernet/intel/ice/ice_ptp.c +7 -8
@@ -1324,22 +1324,21 @@ ice_ptp_flush_tx_tracker(struct ice_pf *pf, struct ice_ptp_tx *tx) {u8 idx; -spin_lock (&tx->lock); -for (idx =0 ; idx < tx->len; idx++) {u8 phy_idx = idx + tx->quad_offset; -/* Clear any potential residual timestamp in the PHY block */ -if (!pf->hw.reset_ongoing) -ice_clear_phy_tstamp (&pf->hw, tx->quad, phy_idx); - +spin_lock (&tx->lock);if (tx->tstamps[idx].skb) {dev_kfree_skb_any (tx->tstamps[idx].skb); tx->tstamps[idx].skb =NULL ; } - } +clear_bit (idx, tx->in_use); +spin_unlock (&tx->lock); -spin_unlock (&tx->lock); +/* Clear any potential residual timestamp in the PHY block */ +if (!pf->hw.reset_ongoing) +ice_clear_phy_tstamp (&pf->hw, tx->quad, phy_idx); + } }/**
drivers/net/ethernet/mellanox/mlx5/core/cq.c +3 -4
@@ -154,6 +154,8 @@ int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq)u32 in[MLX5_ST_SZ_DW (destroy_cq_in)] = {};int err; +mlx5_debug_cq_remove (dev, cq); +mlx5_eq_del_cq (mlx5_get_async_eq (dev), cq);mlx5_eq_del_cq (&cq->eq->core, cq);
@@ -161,16 +163,13 @@ int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq)MLX5_SET (destroy_cq_in, in, cqn, cq->cqn);MLX5_SET (destroy_cq_in, in, uid, cq->uid); err =mlx5_cmd_exec_in (dev, destroy_cq, in); -if (err) -return err;synchronize_irq (cq->irqn); -mlx5_debug_cq_remove (dev, cq);mlx5_cq_put (cq);wait_for_completion (&cq->free); -return 0 ; +return err; }EXPORT_SYMBOL (mlx5_core_destroy_cq);
drivers/net/ethernet/mellanox/mlx5/core/en_main.c +52 -5
72 lines not on this page · raw message
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +0 -1
@@ -611,7 +611,6 @@ static void mlx5e_build_rep_netdev(struct net_device *netdev, netdev->hw_features |=NETIF_F_RXCSUM ; netdev->features |= netdev->hw_features; - netdev->features |=NETIF_F_VLAN_CHALLENGED ; netdev->features |=NETIF_F_NETNS_LOCAL ; }
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +5 -47
78 lines not on this page · raw message
drivers/net/ethernet/microchip/encx24j600-regmap.c +8 -2
@@ -497,13 +497,19 @@ static struct regmap_bus phymap_encx24j600 = { .reg_read = regmap_encx24j600_phy_reg_read, }; -void devm_regmap_init_encx24j600 (struct device *dev, -struct encx24j600_context *ctx) +int devm_regmap_init_encx24j600 (struct device *dev, +struct encx24j600_context *ctx) {mutex_init (&ctx->mutex); regcfg.lock_arg = ctx; ctx->regmap =devm_regmap_init (dev, ®map_encx24j600, ctx, ®cfg); +if (IS_ERR (ctx->regmap)) +return PTR_ERR (ctx->regmap); ctx->phymap =devm_regmap_init (dev, &phymap_encx24j600, ctx, &phycfg); +if (IS_ERR (ctx->phymap)) +return PTR_ERR (ctx->phymap); + +return 0 ; }EXPORT_SYMBOL_GPL (devm_regmap_init_encx24j600);
drivers/net/ethernet/microchip/encx24j600.c +4 -1
@@ -1023,10 +1023,13 @@ static int encx24j600_spi_probe(struct spi_device *spi) priv->speed =SPEED_100 ; priv->ctx.spi = spi; -devm_regmap_init_encx24j600 (&spi->dev, &priv->ctx); ndev->irq = spi->irq; ndev->netdev_ops = &encx24j600_netdev_ops; + ret =devm_regmap_init_encx24j600 (&spi->dev, &priv->ctx); +if (ret) + goto out_free; +mutex_init (&priv->lock);/* Reset device and check if it is connected */
drivers/net/ethernet/microchip/encx24j600_hw.h +2 -2
@@ -15,8 +15,8 @@ struct encx24j600_context {int bank; }; -void devm_regmap_init_encx24j600 (struct device *dev, -struct encx24j600_context *ctx); +int devm_regmap_init_encx24j600 (struct device *dev, +struct encx24j600_context *ctx);/* Single-byte instructions */ #define BANK_SELECT (bank) (0xC0 | ((bank & (BANK_MASK >> BANK_SHIFT)) << 1))
drivers/net/ethernet/mscc/ocelot.c +71 -19
176 lines not on this page · raw message
drivers/net/ethernet/neterion/s2io.c +1 -1
@@ -8566,7 +8566,7 @@ static void s2io_io_resume(struct pci_dev *pdev)return ; } -if (s2io_set_mac_addr (netdev, netdev->dev_addr) ==FAILURE ) { +if (do_s2io_prog_unicast (netdev, netdev->dev_addr) ==FAILURE ) {s2io_card_down (sp);pr_err ("Can't restore mac addr after reset.\n" );return ;
drivers/net/ethernet/netronome/nfp/flower/main.c +14 -5
@@ -830,10 +830,6 @@ static int nfp_flower_init(struct nfp_app *app)if (err) goto err_cleanup; - err =flow_indr_dev_register (nfp_flower_indr_setup_tc_cb, app); -if (err) - goto err_cleanup; -if (app_priv->flower_ext_feats &NFP_FL_FEATS_VF_RLIM )nfp_flower_qos_init (app);
@@ -942,7 +938,20 @@ static int nfp_flower_start(struct nfp_app *app)return err; } -return nfp_tunnel_config_start (app); + err =flow_indr_dev_register (nfp_flower_indr_setup_tc_cb, app); +if (err) +return err; + + err =nfp_tunnel_config_start (app); +if (err) + goto err_tunnel_config; + +return 0 ; + +err_tunnel_config: +flow_indr_dev_unregister (nfp_flower_indr_setup_tc_cb, app, + nfp_flower_setup_indr_tc_release); +return err; }static void nfp_flower_stop (struct nfp_app *app)
drivers/net/ethernet/pensando/ionic/ionic_lif.c +4 -0
@@ -1357,6 +1357,10 @@ static int ionic_addr_add(struct net_device *netdev, const u8 *addr)static int ionic_addr_del (struct net_device *netdev,const u8 *addr) { +/* Don't delete our own address from the uc list */ +if (ether_addr_equal (addr, netdev->dev_addr)) +return 0 ; +return ionic_lif_addr (netdev_priv (netdev), addr,DEL_ADDR ); }
drivers/net/ethernet/qlogic/qed/qed_main.c +1 -0
@@ -1295,6 +1295,7 @@ static int qed_slowpath_start(struct qed_dev *cdev, }else {DP_NOTICE (cdev,"Failed to acquire PTT for aRFS\n" ); + rc = -EINVAL ; goto err; } }
drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +11 -2
@@ -218,11 +218,18 @@ static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)readl (ioaddr +DMA_BUS_MODE + i *4 ); } -static void dwmac1000_get_hw_feature (void __iomem *ioaddr, -struct dma_features *dma_cap) +static int dwmac1000_get_hw_feature (void __iomem *ioaddr, +struct dma_features *dma_cap) {u32 hw_cap =readl (ioaddr +DMA_HW_FEATURE ); +if (!hw_cap) { +/* 0x00000000 is the value read on old hardware that does not +* implement this register +*/ +return -EOPNOTSUPP ; + } + dma_cap->mbps_10_100 = (hw_cap &DMA_HW_FEAT_MIISEL ); dma_cap->mbps_1000 = (hw_cap &DMA_HW_FEAT_GMIISEL ) >>1 ; dma_cap->half_duplex = (hw_cap &DMA_HW_FEAT_HDSEL ) >>2 ;
@@ -252,6 +259,8 @@ static void dwmac1000_get_hw_feature(void __iomem *ioaddr, dma_cap->number_tx_channel = (hw_cap &DMA_HW_FEAT_TXCHCNT ) >>22 ;/* Alternate (enhanced) DESC mode */ dma_cap->enh_desc = (hw_cap &DMA_HW_FEAT_ENHDESSEL ) >>24 ; + +return 0 ; } static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +4 -2
@@ -347,8 +347,8 @@ static void dwmac4_dma_tx_chan_op_mode(void __iomem *ioaddr, int mode,writel (mtl_tx_op, ioaddr +MTL_CHAN_TX_OP_MODE (channel)); } -static void dwmac4_get_hw_feature (void __iomem *ioaddr, -struct dma_features *dma_cap) +static int dwmac4_get_hw_feature (void __iomem *ioaddr, +struct dma_features *dma_cap) {u32 hw_cap =readl (ioaddr +GMAC_HW_FEATURE0 );
@@ -437,6 +437,8 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr, dma_cap->frpbs = (hw_cap &GMAC_HW_FEAT_FRPBS ) >>11 ; dma_cap->frpsel = (hw_cap &GMAC_HW_FEAT_FRPSEL ) >>10 ; dma_cap->dvlan = (hw_cap &GMAC_HW_FEAT_DVLAN ) >>5 ; + +return 0 ; }/* Enable/disable TSO feature and set MSS */
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +4 -2
@@ -371,8 +371,8 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,return ret; } -static void dwxgmac2_get_hw_feature (void __iomem *ioaddr, -struct dma_features *dma_cap) +static int dwxgmac2_get_hw_feature (void __iomem *ioaddr, +struct dma_features *dma_cap) {u32 hw_cap;
@@ -445,6 +445,8 @@ static void dwxgmac2_get_hw_feature(void __iomem *ioaddr, dma_cap->frpes = (hw_cap &XGMAC_HWFEAT_FRPES ) >>11 ; dma_cap->frpbs = (hw_cap &XGMAC_HWFEAT_FRPPB ) >>9 ; dma_cap->frpsel = (hw_cap &XGMAC_HWFEAT_FRPSEL ) >>3 ; + +return 0 ; }static void dwxgmac2_rx_watchdog (void __iomem *ioaddr,u32 riwt,u32 queue)
drivers/net/ethernet/stmicro/stmmac/hwif.h +3 -3
@@ -203,8 +203,8 @@ struct stmmac_dma_ops {int (*dma_interrupt) (void __iomem *ioaddr,struct stmmac_extra_stats *x,u32 chan,u32 dir);/* If supported then get the optional core features */ -void (*get_hw_feature)(void __iomem *ioaddr, -struct dma_features *dma_cap); +int (*get_hw_feature)(void __iomem *ioaddr, +struct dma_features *dma_cap);/* Program the HW RX Watchdog */ void (*rx_watchdog)(void __iomem *ioaddr,u32 riwt,u32 queue);void (*set_tx_ring_len)(void __iomem *ioaddr,u32 len,u32 chan);
@@ -255,7 +255,7 @@ struct stmmac_dma_ops { #define stmmac_dma_interrupt_status(__priv, __args...) \ stmmac_do_callback(__priv, dma, dma_interrupt, __args) #define stmmac_get_hw_feature(__priv, __args...) \ - stmmac_do_void_callback(__priv, dma, get_hw_feature, __args) + stmmac_do_callback(__priv, dma, get_hw_feature, __args) #define stmmac_rx_watchdog(__priv, __args...) \ stmmac_do_void_callback(__priv, dma, rx_watchdog, __args) #define stmmac_set_tx_ring_len(__priv, __args...) \
drivers/net/phy/phy_device.c +3 -0
@@ -3112,6 +3112,9 @@ static void phy_shutdown(struct device *dev) {struct phy_device *phydev =to_phy_device (dev); +if (phydev->state ==PHY_READY || !phydev->attached_dev) +return ; +phy_disable_interrupts (phydev); }
drivers/net/usb/Kconfig +4 -0
@@ -99,6 +99,10 @@ config USB_RTL8150 config USB_RTL8152 tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters" select MII + select CRC32 + select CRYPTO + select CRYPTO_HASH + select CRYPTO_SHA256 help This option adds support for Realtek RTL8152 based USB 2.0 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
drivers/nvme/host/pci.c +1 -1
@@ -1331,7 +1331,7 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req, bool reserved) iod->aborted =1 ; cmd.abort.opcode = nvme_admin_abort_cmd; - cmd.abort.cid = req->tag; + cmd.abort.cid =nvme_cid (req); cmd.abort.sqid =cpu_to_le16 (nvmeq->qid); dev_warn(nvmeq->dev->ctrl.device,
drivers/nvmem/core.c +2 -1
@@ -1383,7 +1383,8 @@ static void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, void *buf) *p-- =0 ;/* clear msb bits if any leftover in the last byte */ - *p &=GENMASK ((cell->nbits%BITS_PER_BYTE ) -1 ,0 ); +if (cell->nbits %BITS_PER_BYTE ) + *p &=GENMASK ((cell->nbits %BITS_PER_BYTE ) -1 ,0 ); } static int __nvmem_cell_read(struct nvmem_device *nvmem,
drivers/platform/mellanox/mlxreg-io.c +2 -2
@@ -98,7 +98,7 @@ mlxreg_io_get_reg(void *regmap, struct mlxreg_core_data *data, u32 in_val,if (ret) goto access_error; - *regval |=rol32 (val, regsize * i); + *regval |=rol32 (val, regsize * i *8 ); } }
@@ -141,7 +141,7 @@ mlxreg_io_attr_store(struct device *dev, struct device_attribute *attr,return -EINVAL ;/* Convert buffer to input value. */ - ret =kstrtou32 (buf, len, &input_val); + ret =kstrtou32 (buf,0 , &input_val);if (ret)return ret;
drivers/platform/x86/amd-pmc.c +1 -0
@@ -476,6 +476,7 @@ static const struct acpi_device_id amd_pmc_acpi_ids[] = { {"AMDI0006", 0}, {"AMDI0007", 0}, {"AMD0004", 0}, + {"AMD0005", 0}, { } };MODULE_DEVICE_TABLE (acpi, amd_pmc_acpi_ids);
drivers/platform/x86/gigabyte-wmi.c +1 -0
@@ -141,6 +141,7 @@ static u8 gigabyte_wmi_detect_sensor_usability(struct wmi_device *wdev)static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = {DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME ("B450M S2H V2" ), +DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME ("B550 AORUS ELITE AX V2" ),DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME ("B550 AORUS ELITE" ),DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME ("B550 AORUS ELITE V2" ),DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME ("B550 GAMING X V2" ),
drivers/platform/x86/intel_scu_ipc.c +1 -1
@@ -232,7 +232,7 @@ static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset)/* Wait till scu status is busy */ static inline int busy_loop (struct intel_scu_ipc_dev *scu) { -unsigned long end = jiffies +msecs_to_jiffies (IPC_TIMEOUT ); +unsigned long end = jiffies +IPC_TIMEOUT ; do { u32 status;
drivers/spi/spi-atmel.c +2 -2
@@ -1301,7 +1301,7 @@ static int atmel_spi_one_transfer(struct spi_master *master,* DMA map early, for performance (empties dcache ASAP) and * better fault reporting. */ -if ((!master->cur_msg_mapped) +if ((!master->cur_msg->is_dma_mapped) && as->use_pdc) {if (atmel_spi_dma_map_xfer (as, xfer) <0 )return -ENOMEM ;
@@ -1381,7 +1381,7 @@ static int atmel_spi_one_transfer(struct spi_master *master, } } -if (!master->cur_msg_mapped +if (!master->cur_msg->is_dma_mapped && as->use_pdc)atmel_spi_dma_unmap_xfer (master, xfer);
drivers/spi/spi-bcm-qspi.c +45 -32
99 lines not on this page · raw message
drivers/spi/spidev.c +14 -0
@@ -673,6 +673,19 @@ static const struct file_operations spidev_fops = {static struct class *spidev_class; +static const struct spi_device_id spidev_spi_ids[] = { + { .name ="dh2228fv" }, + { .name ="ltc2488" }, + { .name ="sx1301" }, + { .name ="bk4" }, + { .name ="dhcom-board" }, + { .name ="m53cpld" }, + { .name ="spi-petra" }, + { .name ="spi-authenta" }, + {}, +}; +MODULE_DEVICE_TABLE (spi, spidev_spi_ids); +#ifdef CONFIG_OF static const struct of_device_id spidev_dt_ids[] = { { .compatible = "rohm,dh2228fv" },
@@ -819,6 +832,7 @@ static struct spi_driver spidev_spi_driver = { }, .probe = spidev_probe, .remove = spidev_remove, + .id_table = spidev_spi_ids,/* NOTE: suspend/resume methods are not necessary here. * We don't do anything except pass the requests to/from
drivers/tee/optee/core.c +3 -0
@@ -585,6 +585,9 @@ static int optee_remove(struct platform_device *pdev) {struct optee *optee =platform_get_drvdata (pdev); +/* Unregister OP-TEE specific client devices on TEE bus */ +optee_unregister_devices (); +/* * Ask OP-TEE to free all cached shared memory objects to decrease * reference counters and also avoid wild pointers in secure world
drivers/tee/optee/device.c +22 -0
@@ -53,6 +53,13 @@ static int get_devices(struct tee_context *ctx, u32 session,return 0 ; } +static void optee_release_device (struct device *dev) +{ +struct tee_client_device *optee_device =to_tee_client_device (dev); + +kfree (optee_device); +} +static int optee_register_device (const uuid_t *device_uuid) {struct tee_client_device *optee_device =NULL ;
@@ -63,6 +70,7 @@ static int optee_register_device(const uuid_t *device_uuid)return -ENOMEM ; optee_device->dev.bus = &tee_bus_type; + optee_device->dev.release = optee_release_device;if (dev_set_name (&optee_device->dev,"optee-ta-%pUb" , device_uuid)) {kfree (optee_device);return -ENOMEM ;
@@ -154,3 +162,17 @@ int optee_enumerate_devices(u32 func) {return __optee_enumerate_devices (func); } + +static int __optee_unregister_device (struct device *dev,void *data) +{ +if (!strncmp (dev_name (dev),"optee-ta" ,strlen ("optee-ta" ))) +device_unregister (dev); + +return 0 ; +} + +void optee_unregister_devices (void ) +{ +bus_for_each_dev (&tee_bus_type,NULL ,NULL , + __optee_unregister_device); +}
drivers/tee/optee/optee_private.h +1 -0
@@ -184,6 +184,7 @@ void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,#define PTA_CMD_GET_DEVICES 0x0#define PTA_CMD_GET_DEVICES_SUPP 0x1int optee_enumerate_devices (u32 func); +void optee_unregister_devices (void );/* * Small helpers
drivers/usb/host/xhci-dbgtty.c +13 -15
@@ -408,40 +408,38 @@ static int xhci_dbc_tty_register_device(struct xhci_dbc *dbc)return -EBUSY ;xhci_dbc_tty_init_port (dbc, port); - tty_dev =tty_port_register_device (&port->port, - dbc_tty_driver,0 ,NULL ); -if (IS_ERR (tty_dev)) { - ret =PTR_ERR (tty_dev); - goto register_fail; - } ret =kfifo_alloc (&port->write_fifo,DBC_WRITE_BUF_SIZE ,GFP_KERNEL );if (ret) - goto buf_alloc_fail; + goto err_exit_port; ret =xhci_dbc_alloc_requests (dbc,BULK_IN , &port->read_pool, dbc_read_complete);if (ret) - goto request_fail; + goto err_free_fifo; ret =xhci_dbc_alloc_requests (dbc,BULK_OUT , &port->write_pool, dbc_write_complete);if (ret) - goto request_fail; + goto err_free_requests; + + tty_dev =tty_port_register_device (&port->port, + dbc_tty_driver,0 ,NULL ); +if (IS_ERR (tty_dev)) { + ret =PTR_ERR (tty_dev); + goto err_free_requests; + } port->registered = true;return 0 ; -request_fail: +err_free_requests:xhci_dbc_free_requests (&port->read_pool);xhci_dbc_free_requests (&port->write_pool); +err_free_fifo:kfifo_free (&port->write_fifo); - -buf_alloc_fail: -tty_unregister_device (dbc_tty_driver,0 ); - -register_fail: +err_exit_port:xhci_dbc_tty_exit_port (port);dev_err (dbc->dev,"can't register tty port, err %d\n" , ret);
drivers/usb/host/xhci-pci.c +5 -1
@@ -30,6 +30,7 @@#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400#define PCI_VENDOR_ID_ETRON 0x1b6f
@@ -113,6 +114,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)/* Look for vendor-specific quirks */ if (pdev->vendor ==PCI_VENDOR_ID_FRESCO_LOGIC && (pdev->device ==PCI_DEVICE_ID_FRESCO_LOGIC_PDK || + pdev->device ==PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 || pdev->device ==PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 )) {if (pdev->device ==PCI_DEVICE_ID_FRESCO_LOGIC_PDK && pdev->revision ==0x0 ) {
@@ -279,8 +281,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |=XHCI_BROKEN_STREAMS ; -if (pdev->vendor ==PCI_VENDOR_ID_VIA && pdev->device ==0x3483 ) +if (pdev->vendor ==PCI_VENDOR_ID_VIA && pdev->device ==0x3483 ) { xhci->quirks |=XHCI_LPM_SUPPORT ; + xhci->quirks |=XHCI_EP_CTX_BROKEN_DCS ; + }if (pdev->vendor ==PCI_VENDOR_ID_ASMEDIA && pdev->device ==PCI_DEVICE_ID_ASMEDIA_1042_XHCI )
drivers/usb/host/xhci-ring.c +34 -5
@@ -366,16 +366,22 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,/* Must be called with xhci->lock held, releases and aquires lock back */ static int xhci_abort_cmd_ring (struct xhci_hcd *xhci,unsigned long flags) { -u64 temp_64; +u32 temp_32;int ret;xhci_dbg (xhci,"Abort command ring\n" );reinit_completion (&xhci->cmd_ring_stop_completion); - temp_64 =xhci_read_64 (xhci, &xhci->op_regs->cmd_ring); -xhci_write_64 (xhci, temp_64 |CMD_RING_ABORT , - &xhci->op_regs->cmd_ring); +/* +* The control bits like command stop, abort are located in lower +* dword of the command ring control register. Limit the write +* to the lower dword to avoid corrupting the command ring pointer +* in case if the command ring is stopped by the time upper dword +* is written. +*/ + temp_32 =readl (&xhci->op_regs->cmd_ring); +writel (temp_32 |CMD_RING_ABORT , &xhci->op_regs->cmd_ring);/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the * completion of the Command Abort operation. If CRR is not negated in 5
@@ -559,8 +565,11 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,struct xhci_ring *ep_ring;struct xhci_command *cmd;struct xhci_segment *new_seg; +struct xhci_segment *halted_seg =NULL ;union xhci_trb *new_deq;int new_cycle; +union xhci_trb *halted_trb; +int index =0 ;dma_addr_t addr;u64 hw_dequeue;bool cycle_found = false;
@@ -598,7 +607,27 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, hw_dequeue =xhci_get_hw_deq (xhci, dev, ep_index, stream_id); new_seg = ep_ring->deq_seg; new_deq = ep_ring->dequeue; - new_cycle = hw_dequeue &0x1 ; + +/* +* Quirk: xHC write-back of the DCS field in the hardware dequeue +* pointer is wrong - use the cycle state of the TRB pointed to by +* the dequeue pointer. +*/ +if (xhci->quirks &XHCI_EP_CTX_BROKEN_DCS && + !(ep->ep_state &EP_HAS_STREAMS )) + halted_seg =trb_in_td (xhci, td->start_seg, + td->first_trb, td->last_trb, + hw_dequeue & ~0xf , false); +if (halted_seg) { + index = ((dma_addr_t)(hw_dequeue & ~0xf ) - halted_seg->dma) / +sizeof (*halted_trb); + halted_trb = &halted_seg->trbs[index]; + new_cycle = halted_trb->generic.field[3 ] &0x1 ; +xhci_dbg (xhci,"Endpoint DCS = %d TRB index = %d cycle = %d\n" , + (u8)(hw_dequeue &0x1 ), index, new_cycle); + }else { + new_cycle = hw_dequeue &0x1 ; + }/* * We want to find the pointer, segment and cycle state of the new trb
drivers/usb/host/xhci.c +5 -0
@@ -3212,10 +3212,13 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,return ;/* Bail out if toggle is already being cleared by a endpoint reset */ +spin_lock_irqsave (&xhci->lock, flags);if (ep->ep_state &EP_HARD_CLEAR_TOGGLE ) { ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE ; +spin_unlock_irqrestore (&xhci->lock, flags);return ; } +spin_unlock_irqrestore (&xhci->lock, flags);/* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */ if (usb_endpoint_xfer_control (&host_ep->desc) ||usb_endpoint_xfer_isoc (&host_ep->desc))
@@ -3301,8 +3304,10 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,xhci_free_command (xhci, cfg_cmd); cleanup:xhci_free_command (xhci, stop_cmd); +spin_lock_irqsave (&xhci->lock, flags);if (ep->ep_state &EP_SOFT_CLEAR_TOGGLE ) ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE ; +spin_unlock_irqrestore (&xhci->lock, flags); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
drivers/usb/host/xhci.h +1 -0
@@ -1899,6 +1899,7 @@ struct xhci_hcd {#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)#define XHCI_NO_SOFT_RETRY BIT_ULL(40)#define XHCI_BROKEN_D3COLD BIT_ULL(41) +#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)unsigned int num_active_eps;unsigned int limit_active_eps;
drivers/usb/musb/musb_dsps.c +3 -1
@@ -899,11 +899,13 @@ static int dsps_probe(struct platform_device *pdev)if (usb_get_dr_mode (&pdev->dev) ==USB_DR_MODE_PERIPHERAL ) { ret =dsps_setup_optional_vbus_irq (pdev, glue);if (ret) - goto err; + goto unregister_pdev; }return 0 ; +unregister_pdev: +platform_device_unregister (glue->musb); err:pm_runtime_disable (&pdev->dev);iounmap (glue->usbss_base);
drivers/usb/serial/option.c +8 -0
@@ -246,11 +246,13 @@ static void option_instat_callback(struct urb *urb);/* These Quectel products use Quectel's vendor ID */ #define QUECTEL_PRODUCT_EC21 0x0121#define QUECTEL_PRODUCT_EC25 0x0125 +#define QUECTEL_PRODUCT_EG91 0x0191#define QUECTEL_PRODUCT_EG95 0x0195#define QUECTEL_PRODUCT_BG96 0x0296#define QUECTEL_PRODUCT_EP06 0x0306#define QUECTEL_PRODUCT_EM12 0x0512#define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_EC200S_CN 0x6002#define QUECTEL_PRODUCT_EC200T 0x6026#define CMOTECH_VENDOR_ID 0x16d8
@@ -1111,6 +1113,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
@@ -1128,6 +1133,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
@@ -1227,6 +1233,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1203, 0xff), /* Telit LE910Cx (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1204, 0xff), /* Telit LE910Cx (MBIM) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
drivers/usb/serial/qcserial.c +1 -0
@@ -165,6 +165,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ + {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
drivers/vhost/vdpa.c +1 -1
@@ -316,7 +316,7 @@ static long vhost_vdpa_set_config_call(struct vhost_vdpa *v, u32 __user *argp)struct eventfd_ctx *ctx; cb.callback = vhost_vdpa_config_cb; - cb.private = v->vdpa; + cb.private = v;if (copy_from_user (&fd, argp,sizeof (fd)))return -EFAULT ;
drivers/virtio/virtio.c +11 -0
@@ -238,6 +238,17 @@ static int virtio_dev_probe(struct device *_d) driver_features_legacy = driver_features; } +/* +* Some devices detect legacy solely via F_VERSION_1. Write +* F_VERSION_1 to force LE config space accesses before FEATURES_OK for +* these when needed. +*/ +if (drv->validate && !virtio_legacy_is_little_endian () + && device_features &BIT_ULL (VIRTIO_F_VERSION_1 )) { + dev->features =BIT_ULL (VIRTIO_F_VERSION_1 ); + dev->config->finalize_features (dev); + } +if (device_features & (1ULL <<VIRTIO_F_VERSION_1 )) dev->features = driver_features & device_features;else
fs/btrfs/extent-tree.c +1 -0
@@ -4859,6 +4859,7 @@ struct extent_buffer *btrfs_alloc_tree_block(struct btrfs_trans_handle *trans, out_free_delayed:btrfs_free_delayed_extent_op (extent_op); out_free_buf: +btrfs_tree_unlock (buf);free_extent_buffer (buf); out_free_reserved:btrfs_free_reserved_extent (fs_info, ins.objectid, ins.offset,0 );
fs/btrfs/file.c +10 -9
@@ -733,8 +733,7 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans,if (args->start >= inode->disk_i_size && !args->replace_extent) modify_tree =0 ; - update_refs = (test_bit (BTRFS_ROOT_SHAREABLE , &root->state) || - root == fs_info->tree_root); + update_refs = (root->root_key.objectid !=BTRFS_TREE_LOG_OBJECTID );while (1 ) { recow =0 ; ret = btrfs_lookup_file_extent(trans, root, path, ino,
@@ -2692,14 +2691,16 @@ int btrfs_replace_file_extents(struct btrfs_inode *inode, drop_args.bytes_found);if (ret != -ENOSPC ) {/* -* When cloning we want to avoid transaction aborts when -* nothing was done and we are attempting to clone parts -* of inline extents, in such cases -EOPNOTSUPP is -* returned by __btrfs_drop_extents() without having -* changed anything in the file. +* The only time we don't want to abort is if we are +* attempting to clone a partial inline extent, in which +* case we'll get EOPNOTSUPP. However if we aren't +* clone we need to abort no matter what, because if we +* got EOPNOTSUPP via prealloc then we messed up and +* need to abort. */ -if (extent_info && !extent_info->is_new_extent && - ret && ret != -EOPNOTSUPP ) +if (ret && + (ret != -EOPNOTSUPP || + (extent_info && extent_info->is_new_extent)))btrfs_abort_transaction (trans, ret);break ; }
fs/btrfs/tree-log.c +22 -10
@@ -1182,7 +1182,10 @@ static inline int __add_inode_ref(struct btrfs_trans_handle *trans,/* look for a conflicting sequence number */ di =btrfs_lookup_dir_index_item (trans, root, path,btrfs_ino (dir), ref_index, name, namelen,0 ); -if (di && !IS_ERR (di)) { +if (IS_ERR (di)) { +if (PTR_ERR (di) != -ENOENT ) +return PTR_ERR (di); + }else if (di) { ret =drop_one_dir_item (trans, root, path, dir, di);if (ret)return ret;
@@ -1192,7 +1195,9 @@ static inline int __add_inode_ref(struct btrfs_trans_handle *trans,/* look for a conflicting name */ di =btrfs_lookup_dir_item (trans, root, path,btrfs_ino (dir), name, namelen,0 ); -if (di && !IS_ERR (di)) { +if (IS_ERR (di)) { +return PTR_ERR (di); + }else if (di) { ret =drop_one_dir_item (trans, root, path, dir, di);if (ret)return ret;
@@ -1936,8 +1941,8 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans,struct btrfs_key log_key;struct inode *dir;u8 log_type; -int exists; -int ret =0 ; +bool exists; +int ret;bool update_size = (key->type ==BTRFS_DIR_INDEX_KEY );bool name_added = false;
@@ -1957,12 +1962,12 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, name_len);btrfs_dir_item_key_to_cpu (eb, di, &log_key); - exists =btrfs_lookup_inode (trans, root, path, &log_key,0 ); -if (exists ==0 ) - exists =1 ; -else - exists =0 ; + ret =btrfs_lookup_inode (trans, root, path, &log_key,0 );btrfs_release_path (path); +if (ret <0 ) + goto out; + exists = (ret ==0 ); + ret =0 ;if (key->type ==BTRFS_DIR_ITEM_KEY ) { dst_di = btrfs_lookup_dir_item(trans, root, path, key->objectid,
@@ -1977,7 +1982,14 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, ret = -EINVAL ; goto out; } -if (IS_ERR_OR_NULL (dst_di)) { + +if (dst_di ==ERR_PTR (-ENOENT )) + dst_di =NULL ; + +if (IS_ERR (dst_di)) { + ret =PTR_ERR (dst_di); + goto out; + }else if (!dst_di) {/* we need a sequence number to insert, so we only * do inserts for the BTRFS_DIR_INDEX_KEY types */
include/linux/mlx5/mlx5_ifc.h +8 -2
@@ -9467,16 +9467,22 @@ struct mlx5_ifc_pcmr_reg_bits {u8 reserved_at_0[0x8 ];u8 local_port[0x8 ];u8 reserved_at_10[0x10 ]; +u8 entropy_force_cap[0x1 ];u8 entropy_calc_cap[0x1 ];u8 entropy_gre_calc_cap[0x1 ]; -u8 reserved_at_23[0x1b ]; +u8 reserved_at_23[0xf ]; +u8 rx_ts_over_crc_cap[0x1 ]; +u8 reserved_at_33[0xb ];u8 fcs_cap[0x1 ];u8 reserved_at_3f[0x1 ]; +u8 entropy_force[0x1 ];u8 entropy_calc[0x1 ];u8 entropy_gre_calc[0x1 ]; -u8 reserved_at_43[0x1b ]; +u8 reserved_at_43[0xf ]; +u8 rx_ts_over_crc[0x1 ]; +u8 reserved_at_53[0xb ];u8 fcs_chk[0x1 ];u8 reserved_at_5f[0x1 ]; };
include/soc/mscc/ocelot.h +5 -1
@@ -600,10 +600,10 @@ struct ocelot_port {/* The VLAN ID that will be transmitted as untagged, on egress */ struct ocelot_vlan native_vlan; +unsigned int ptp_skbs_in_flight;u8 ptp_cmd;struct sk_buff_head tx_skbs;u8 ts_id; -spinlock_t ts_id_lock;phy_interface_t phy_mode;
@@ -677,6 +677,9 @@ struct ocelot {struct ptp_clock *ptp_clock;struct ptp_clock_info ptp_info;struct hwtstamp_config hwtstamp_config; +unsigned int ptp_skbs_in_flight; +/* Protects the 2-step TX timestamp ID logic */ +spinlock_t ts_id_lock;/* Protects the PTP interface state */ struct mutex ptp_lock;/* Protects the PTP clock */
@@ -691,6 +694,7 @@ struct ocelot_policer {struct ocelot_skb_cb {struct sk_buff *clone; +unsigned int ptp_class;/* valid only for clones */ u8 ptp_cmd;u8 ts_id; };
include/soc/mscc/ocelot_ptp.h +3 -0
@@ -13,6 +13,9 @@#include <linux/ptp_clock_kernel.h> #include <soc/mscc/ocelot.h> +#define OCELOT_MAX_PTP_ID 63 +#define OCELOT_PTP_FIFO_SIZE 128 +#define PTP_PIN_CFG_RSZ 0x20#define PTP_PIN_TOD_SEC_MSB_RSZ PTP_PIN_CFG_RSZ#define PTP_PIN_TOD_SEC_LSB_RSZ PTP_PIN_CFG_RSZ
kernel/module.c +2 -0
@@ -4484,8 +4484,10 @@ static void cfi_init(struct module *mod)/* Fix init/exit functions to point to the CFI jump table */ if (init) mod->init = *init; +#ifdef CONFIG_MODULE_UNLOAD if (exit) mod->exit = *exit; +#endif cfi_module_add (mod, module_addr_min);#endif
kernel/trace/trace.c +4 -7
@@ -1744,16 +1744,15 @@ void latency_fsnotify(struct trace_array *tr) irq_work_queue(&tr->fsnotify_irqwork); } -/* -* (defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER)) && \ -* defined(CONFIG_FSNOTIFY) -*/ -#else +#elif defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER) \ + || defined(CONFIG_OSNOISE_TRACER)#define trace_create_maxlat_file (tr, d_tracer) \ trace_create_file("tracing_max_latency", 0644, d_tracer, \ &tr->max_latency, &tracing_max_lat_fops) +#else +#define trace_create_maxlat_file (tr, d_tracer) do { } while (0)#endif #ifdef CONFIG_TRACER_MAX_TRACE
@@ -9457,9 +9456,7 @@ init_tracer_tracefs(struct trace_array *tr, struct dentry *d_tracer)create_trace_options_dir (tr); -#if defined(CONFIG_TRACER_MAX_TRACE ) || defined(CONFIG_HWLAT_TRACER )trace_create_maxlat_file (tr, d_tracer); -#endif if (ftrace_create_function_files (tr, d_tracer))MEM_FAIL (1 ,"Could not allocate function filter files" );
net/dsa/switch.c +1 -1
@@ -148,7 +148,7 @@ static int dsa_switch_bridge_leave(struct dsa_switch *ds,if (extack._msg)dev_err (ds->dev,"port %d: %s\n" , info->port, extack._msg); -if (err && err !=EOPNOTSUPP ) +if (err && err != -EOPNOTSUPP )return err; }return 0 ;
net/mptcp/protocol.c +15 -40
110 lines not on this page · raw message
net/nfc/af_nfc.c +3 -0
@@ -60,6 +60,9 @@ int nfc_proto_register(const struct nfc_protocol *nfc_proto) proto_tab[nfc_proto->id] = nfc_proto;write_unlock (&proto_tab_lock); +if (rc) +proto_unregister (nfc_proto->proto); +return rc; }EXPORT_SYMBOL (nfc_proto_register);
net/nfc/digital_core.c +7 -2
@@ -277,6 +277,7 @@ int digital_tg_configure_hw(struct nfc_digital_dev *ddev, int type, int param)static int digital_tg_listen_mdaa (struct nfc_digital_dev *ddev,u8 rf_tech) {struct digital_tg_mdaa_params *params; +int rc; params =kzalloc (sizeof (*params),GFP_KERNEL );if (!params)
@@ -291,8 +292,12 @@ static int digital_tg_listen_mdaa(struct nfc_digital_dev *ddev, u8 rf_tech)get_random_bytes (params->nfcid2 +2 ,NFC_NFCID2_MAXSIZE -2 ); params->sc =DIGITAL_SENSF_FELICA_SC ; -return digital_send_cmd (ddev,DIGITAL_CMD_TG_LISTEN_MDAA ,NULL , params, -500 , digital_tg_recv_atr_req,NULL ); + rc =digital_send_cmd (ddev,DIGITAL_CMD_TG_LISTEN_MDAA ,NULL , params, +500 , digital_tg_recv_atr_req,NULL ); +if (rc) +kfree (params); + +return rc; }static int digital_tg_listen_md (struct nfc_digital_dev *ddev,u8 rf_tech)
net/nfc/digital_technology.c +6 -2
@@ -465,8 +465,12 @@ static int digital_in_send_sdd_req(struct nfc_digital_dev *ddev,skb_put_u8 (skb, sel_cmd);skb_put_u8 (skb,DIGITAL_SDD_REQ_SEL_PAR ); -return digital_in_send_cmd (ddev, skb,30 , digital_in_recv_sdd_res, - target); + rc =digital_in_send_cmd (ddev, skb,30 , digital_in_recv_sdd_res, + target); +if (rc) +kfree_skb (skb); + +return rc; } static void digital_in_recv_sens_res(struct nfc_digital_dev *ddev, void *arg,
net/sched/sch_mqprio.c +18 -12
@@ -529,22 +529,28 @@ static int mqprio_dump_class_stats(struct Qdisc *sch, unsigned long cl,for (i = tc.offset; i < tc.offset + tc.count; i++) {struct netdev_queue *q =netdev_get_tx_queue (dev, i);struct Qdisc *qdisc =rtnl_dereference (q->qdisc); -struct gnet_stats_basic_cpu __percpu *cpu_bstats =NULL ; -struct gnet_stats_queue __percpu *cpu_qstats =NULL ;spin_lock_bh (qdisc_lock (qdisc)); +if (qdisc_is_percpu_stats (qdisc)) { - cpu_bstats = qdisc->cpu_bstats; - cpu_qstats = qdisc->cpu_qstats; + qlen =qdisc_qlen_sum (qdisc); + +__gnet_stats_copy_basic (NULL , &bstats, + qdisc->cpu_bstats, + &qdisc->bstats); +__gnet_stats_copy_queue (&qstats, + qdisc->cpu_qstats, + &qdisc->qstats, + qlen); + }else { + qlen += qdisc->q.qlen; + bstats.bytes += qdisc->bstats.bytes; + bstats.packets += qdisc->bstats.packets; + qstats.backlog += qdisc->qstats.backlog; + qstats.drops += qdisc->qstats.drops; + qstats.requeues += qdisc->qstats.requeues; + qstats.overlimits += qdisc->qstats.overlimits; } - - qlen =qdisc_qlen_sum (qdisc); -__gnet_stats_copy_basic (NULL , &sch->bstats, - cpu_bstats, &qdisc->bstats); -__gnet_stats_copy_queue (&sch->qstats, - cpu_qstats, - &qdisc->qstats, - qlen);spin_unlock_bh (qdisc_lock (qdisc)); }
net/sctp/sm_make_chunk.c +1 -1
@@ -3697,7 +3697,7 @@ struct sctp_chunk *sctp_make_strreset_req( outlen = (sizeof (outreq) + stream_len) * out; inlen = (sizeof (inreq) + stream_len) * in; - retval =sctp_make_reconf (asoc, outlen + inlen); + retval =sctp_make_reconf (asoc,SCTP_PAD4 (outlen) +SCTP_PAD4 (inlen));if (!retval)return NULL ;
net/smc/smc_cdc.c +6 -1
@@ -150,9 +150,11 @@ static int smcr_cdc_get_slot_and_msg_send(struct smc_connection *conn) again: link = conn->lnk; +if (!smc_wr_tx_link_hold (link)) +return -ENOLINK ; rc =smc_cdc_get_free_slot (conn, link, &wr_buf,NULL , &pend);if (rc) -return rc; + goto put_out;spin_lock_bh (&conn->send_lock);if (link != conn->lnk) {
@@ -160,6 +162,7 @@ static int smcr_cdc_get_slot_and_msg_send(struct smc_connection *conn)spin_unlock_bh (&conn->send_lock);smc_wr_tx_put_slot (link, (struct smc_wr_tx_pend_priv *)pend); +smc_wr_tx_link_put (link);if (again)return -ENOLINK ; again = true;
@@ -167,6 +170,8 @@ static int smcr_cdc_get_slot_and_msg_send(struct smc_connection *conn) } rc =smc_cdc_msg_send (conn, wr_buf, pend);spin_unlock_bh (&conn->send_lock); +put_out: +smc_wr_tx_link_put (link);return rc; }
net/smc/smc_core.c +11 -9
@@ -949,7 +949,7 @@ struct smc_link *smc_switch_conns(struct smc_link_group *lgr, to_lnk = &lgr->lnk[i];break ; } -if (!to_lnk) { +if (!to_lnk || !smc_wr_tx_link_hold (to_lnk)) {smc_lgr_terminate_sched (lgr);return NULL ; }
@@ -981,24 +981,26 @@ struct smc_link *smc_switch_conns(struct smc_link_group *lgr,read_unlock_bh (&lgr->conns_lock);/* pre-fetch buffer outside of send_lock, might sleep */ rc =smc_cdc_get_free_slot (conn, to_lnk, &wr_buf,NULL , &pend); -if (rc) { -smcr_link_down_cond_sched (to_lnk); -return NULL ; - } +if (rc) + goto err_out;/* avoid race with smcr_tx_sndbuf_nonempty() */ spin_lock_bh (&conn->send_lock);smc_switch_link_and_count (conn, to_lnk);
Lines of this file are not shown. View the raw message.
net/smc/smc_llc.c +49 -14
63 lines not on this page · raw message
sound/core/pcm_compat.c +71 -1
72 lines not on this page · raw message
sound/pci/hda/patch_realtek.c +62 -4
66 lines not on this page · raw message
sound/usb/quirks-table.h +42 -0
42 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Part of the diff is not shown here. View the raw message.