ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes
Rob Herring
maintainerPATCH v2 1/1 ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes
The spear13xx PCI 'interrupt-map' property is not parse-able. '#interrupt-cells' is missing and there are 3 #address-cells. Based on the driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map' is not needed.
---
Arnd, Olof, Please apply.
arch/arm/boot/dts/spear1310.dtsi | 6 ------ arch/arm/boot/dts/spear1340.dtsi | 2 -- 2 files changed, 8 deletions(-)
arch/arm/boot/dts/spear1310.dtsi +0 -6
@@ -82,8 +82,6 @@ pcie0: pcie@b1000000 { reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 68 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 68 0x4>; num-lanes = <1>; phys = <&miphy0 1>; phy-names = "pcie-phy";
@@ -101,8 +99,6 @@ pcie1: pcie@b1800000 { reg = <0xb1800000 0x4000>, <0x90000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 69 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 69 0x4>; num-lanes = <1>; phys = <&miphy1 1>; phy-names = "pcie-phy";
@@ -120,8 +116,6 @@ pcie2: pcie@b4000000 { reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 70 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 70 0x4>; num-lanes = <1>; phys = <&miphy2 1>; phy-names = "pcie-phy";
arch/arm/boot/dts/spear1340.dtsi +0 -2
@@ -47,8 +47,6 @@ pcie0: pcie@b1000000 { reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 68 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 68 0x4>; num-lanes = <1>; phys = <&miphy0 1>; phy-names = "pcie-phy";
Signature · 1 line
2.32.0
This patch was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:
Hello:
This patch was applied to soc/soc.git (for-next)
by Arnd Bergmann <[email protected]>:
Quoted 11 lines · On Fri, 22 Oct 2021 09:11:56 -0500 you wrote:
The spear13xx PCI 'interrupt-map' property is not parse-able. '#interrupt-cells' is missing and there are 3 #address-cells. Based on the driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map' is not needed.
Cc Shiraz Hashim <[email protected]>Acked-by Viresh Kumar <[email protected]>Signed-off-by Rob Herring <[email protected]>[...]
Here is the summary with links:
- [v2] ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes
https://git.kernel.org/soc/soc/c/5cbd84300b3c
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html