pinctrl: qcom: Add egpio feature support
Subsystems (5)
PATCH v3 1/2 pinctrl: qcom: Add egpio feature support
From: Prasad Sodagudi <[email protected]>
egpio is a scheme which allows special power Island Domain IOs (LPASS,SSC) to be reused as regular chip GPIOs by muxing regular TLMM functions with Island Domain functions.
With this scheme, an IO can be controlled both by the cpu running linux and the Island processor. This provides great flexibility to re-purpose the Island IOs for regular TLMM usecases.
2 new bits are added to ctl_reg, egpio_present is a read only bit which shows if egpio feature is available or not on a given gpio. egpio_enable is the read/write bit and only effective if egpio_present is 1. Once its set, the Island IO is controlled from Chip TLMM. egpio_enable when set to 0 means the GPIO is used as Island Domain IO.
To support this we add a new function 'egpio' which can be used to set the egpio_enable to 0, for any other TLMM controlled functions we set the egpio_enable to 1.
--- drivers/pinctrl/qcom/pinctrl-msm.c | 15 +++++++++++++-- drivers/pinctrl/qcom/pinctrl-msm.h | 10 ++++++++++ 2 files changed, 23 insertions(+), 2 deletions(-)
drivers/pinctrl/qcom/pinctrl-msm.c +13 -2
@@ -185,6 +185,7 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,unsigned int irq =irq_find_mapping (gc->irq.domain, group);struct irq_data *d =irq_get_irq_data (irq);unsigned int gpio_func = pctrl->soc->gpio_func; +unsigned int egpio_func = pctrl->soc->egpio_func;const struct msm_pingroup *g;unsigned long flags;u32 val, mask;
@@ -218,8 +219,18 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,raw_spin_lock_irqsave (&pctrl->lock, flags); val =msm_readl_ctl (pctrl, g); - val &= ~mask; - val |= i << g->mux_bit; + +if (egpio_func && i == egpio_func) { +if (val &BIT (g->egpio_present)) + val &= ~BIT (g->egpio_enable); + }else { + val &= ~mask; + val |= i << g->mux_bit; +/* Claim ownership of pin if egpio capable */ +if (egpio_func && val &BIT (g->egpio_present)) + val |=BIT (g->egpio_enable); + } +msm_writel_ctl (val, pctrl, g);raw_spin_unlock_irqrestore (&pctrl->lock, flags);
drivers/pinctrl/qcom/pinctrl-msm.h +10 -0
@@ -77,6 +77,8 @@ struct msm_pingroup { unsigned drv_bit:5; unsigned od_bit:5; + unsigned egpio_enable:5; + unsigned egpio_present:5; unsigned oe_bit:5; unsigned in_bit:5; unsigned out_bit:5;
@@ -119,6 +121,13 @@ struct msm_gpio_wakeirq_map {* to be aware that their parent can't handle dual * edge interrupts. * @gpio_func: Which function number is GPIO (usually 0). +* @egpio_func: If non-zero then this SoC supports eGPIO. Even though in +* hardware this is a mux 1-level above the TLMM, we'll treat +* it as if this is just another mux state of the TLMM. Since +* it doesn't really map to hardware, we'll allocate a virtual +* function number for eGPIO and any time we see that function +* number used we'll treat it as a request to mux away from +* our TLMM towards another owner. */ struct msm_pinctrl_soc_data {const struct pinctrl_pin_desc *pins;
@@ -136,6 +145,7 @@ struct msm_pinctrl_soc_data {unsigned int nwakeirq_map;bool wakeirq_dual_edge_errata;unsigned int gpio_func; +unsigned int egpio_func; };extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v3 2/2 pinctrl: qcom: sc7280: Add egpio support
sc7280 supports the egpio feature, GPIOs ranging from 144 to 174 (31 GPIOs) support it, we define gpio_func to 9, which is an unused function for all these pins on sc7280.
--- drivers/pinctrl/qcom/pinctrl-sc7280.c | 75 ++++++++++++++++++++--------------- 1 file changed, 44 insertions(+), 31 deletions(-)
drivers/pinctrl/qcom/pinctrl-sc7280.c +44 -31
@@ -43,6 +43,8 @@ .mux_bit = 2, \ .pull_bit = 0, \ .drv_bit = 6, \ + .egpio_enable = 12, \ + .egpio_present = 11, \ .oe_bit = 9, \ .in_bit = 0, \ .out_bit = 1, \
@@ -520,6 +522,7 @@ enum sc7280_functions { msm_mux_dp_lcd, msm_mux_edp_hot, msm_mux_edp_lcd, + msm_mux_egpio, msm_mux_gcc_gp1, msm_mux_gcc_gp2, msm_mux_gcc_gp3,
@@ -658,6 +661,14 @@ static const char * const gpio_groups[] = {"gpio165" ,"gpio166" ,"gpio167" ,"gpio168" ,"gpio169" ,"gpio170" , "gpio171", "gpio172", "gpio173", "gpio174", }; +static const char *const egpio_groups[] = { +"gpio144" ,"gpio145" ,"gpio146" ,"gpio147" ,"gpio148" ,"gpio149" , +"gpio150" ,"gpio151" ,"gpio152" ,"gpio153" ,"gpio154" ,"gpio155" , +"gpio156" ,"gpio157" ,"gpio158" ,"gpio159" ,"gpio160" ,"gpio161" , +"gpio162" ,"gpio163" ,"gpio164" ,"gpio165" ,"gpio166" ,"gpio167" , +"gpio168" ,"gpio169" ,"gpio170" ,"gpio171" ,"gpio172" ,"gpio173" , +"gpio174" , +};static const char *const atest_char_groups[] = {"gpio81" , };
@@ -1150,6 +1161,7 @@ static const struct msm_function sc7280_functions[] = {FUNCTION (dp_lcd),FUNCTION (edp_hot),FUNCTION (edp_lcd), +FUNCTION (egpio),FUNCTION (gcc_gp1),FUNCTION (gcc_gp2), FUNCTION(gcc_gp3),
@@ -1408,37 +1420,37 @@ static const struct msm_pingroup sc7280_groups[] = { [141] = PINGROUP(141, _, _, _, _, _, _, _, _, _), [142] = PINGROUP(142, _, _, _, _, _, _, _, _, _), [143] = PINGROUP(143, _, _, _, _, _, _, _, _, _), - [144] = PINGROUP(144, _, _, _, _, _, _, _, _, _), - [145] = PINGROUP(145, _, _, _, _, _, _, _, _, _), - [146] = PINGROUP(146, _, _, _, _, _, _, _, _, _), - [147] = PINGROUP(147, _, _, _, _, _, _, _, _, _), - [148] = PINGROUP(148, _, _, _, _, _, _, _, _, _), - [149] = PINGROUP(149, _, _, _, _, _, _, _, _, _), - [150] = PINGROUP(150, qdss, _, _, _, _, _, _, _, _), - [151] = PINGROUP(151, qdss, _, _, _, _, _, _, _, _), - [152] = PINGROUP(152, qdss, _, _, _, _, _, _, _, _), - [153] = PINGROUP(153, qdss, _, _, _, _, _, _, _, _), - [154] = PINGROUP(154, _, _, _, _, _, _, _, _, _), - [155] = PINGROUP(155, _, _, _, _, _, _, _, _, _), - [156] = PINGROUP(156, qdss_cti, _, _, _, _, _, _, _, _), - [157] = PINGROUP(157, qdss_cti, _, _, _, _, _, _, _, _), - [158] = PINGROUP(158, _, _, _, _, _, _, _, _, _), - [159] = PINGROUP(159, _, _, _, _, _, _, _, _, _), - [160] = PINGROUP(160, _, _, _, _, _, _, _, _, _), - [161] = PINGROUP(161, _, _, _, _, _, _, _, _, _), - [162] = PINGROUP(162, _, _, _, _, _, _, _, _, _), - [163] = PINGROUP(163, _, _, _, _, _, _, _, _, _), - [164] = PINGROUP(164, _, _, _, _, _, _, _, _, _), - [165] = PINGROUP(165, qdss_cti, _, _, _, _, _, _, _, _), - [166] = PINGROUP(166, qdss_cti, _, _, _, _, _, _, _, _), - [167] = PINGROUP(167, _, _, _, _, _, _, _, _, _), - [168] = PINGROUP(168, _, _, _, _, _, _, _, _, _), - [169] = PINGROUP(169, _, _, _, _, _, _, _, _, _), - [170] = PINGROUP(170, _, _, _, _, _, _, _, _, _), - [171] = PINGROUP(171, qdss, _, _, _, _, _, _, _, _), - [172] = PINGROUP(172, qdss, _, _, _, _, _, _, _, _), - [173] = PINGROUP(173, qdss, _, _, _, _, _, _, _, _), - [174] = PINGROUP(174, qdss, _, _, _, _, _, _, _, _), + [144] = PINGROUP(144, _, _, _, _, _, _, _, _, egpio), + [145] = PINGROUP(145, _, _, _, _, _, _, _, _, egpio), + [146] = PINGROUP(146, _, _, _, _, _, _, _, _, egpio), + [147] = PINGROUP(147, _, _, _, _, _, _, _, _, egpio), + [148] = PINGROUP(148, _, _, _, _, _, _, _, _, egpio), + [149] = PINGROUP(149, _, _, _, _, _, _, _, _, egpio), + [150] = PINGROUP(150, qdss, _, _, _, _, _, _, _, egpio), + [151] = PINGROUP(151, qdss, _, _, _, _, _, _, _, egpio), + [152] = PINGROUP(152, qdss, _, _, _, _, _, _, _, egpio), + [153] = PINGROUP(153, qdss, _, _, _, _, _, _, _, egpio), + [154] = PINGROUP(154, _, _, _, _, _, _, _, _, egpio), + [155] = PINGROUP(155, _, _, _, _, _, _, _, _, egpio), + [156] = PINGROUP(156, qdss_cti, _, _, _, _, _, _, _, egpio), + [157] = PINGROUP(157, qdss_cti, _, _, _, _, _, _, _, egpio), + [158] = PINGROUP(158, _, _, _, _, _, _, _, _, egpio), + [159] = PINGROUP(159, _, _, _, _, _, _, _, _, egpio), + [160] = PINGROUP(160, _, _, _, _, _, _, _, _, egpio), + [161] = PINGROUP(161, _, _, _, _, _, _, _, _, egpio), + [162] = PINGROUP(162, _, _, _, _, _, _, _, _, egpio), + [163] = PINGROUP(163, _, _, _, _, _, _, _, _, egpio), + [164] = PINGROUP(164, _, _, _, _, _, _, _, _, egpio), + [165] = PINGROUP(165, qdss_cti, _, _, _, _, _, _, _, egpio), + [166] = PINGROUP(166, qdss_cti, _, _, _, _, _, _, _, egpio), + [167] = PINGROUP(167, _, _, _, _, _, _, _, _, egpio), + [168] = PINGROUP(168, _, _, _, _, _, _, _, _, egpio), + [169] = PINGROUP(169, _, _, _, _, _, _, _, _, egpio), + [170] = PINGROUP(170, _, _, _, _, _, _, _, _, egpio), + [171] = PINGROUP(171, qdss, _, _, _, _, _, _, _, egpio), + [172] = PINGROUP(172, qdss, _, _, _, _, _, _, _, egpio), + [173] = PINGROUP(173, qdss, _, _, _, _, _, _, _, egpio), + [174] = PINGROUP(174, qdss, _, _, _, _, _, _, _, egpio), [175] = UFS_RESET(ufs_reset, 0xbe000), [176] = SDC_QDSD_PINGROUP(sdc1_rclk, 0xb3004, 0, 6), [177] = SDC_QDSD_PINGROUP(sdc1_clk, 0xb3000, 13, 6),
@@ -1481,6 +1493,7 @@ static const struct msm_pinctrl_soc_data sc7280_pinctrl = { .ngpios = 176, .wakeirq_map = sc7280_pdc_map, .nwakeirq_map = ARRAY_SIZE(sc7280_pdc_map), + .egpio_func = 9, };static int sc7280_pinctrl_probe (struct platform_device *pdev)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Quoted 15 lines · Rajendra Nayak
From: Prasad Sodagudi <[email protected]>
egpio is a scheme which allows special power Island Domain IOs (LPASS,SSC) to be reused as regular chip GPIOs by muxing regular TLMM functions with Island Domain functions.
With this scheme, an IO can be controlled both by the cpu running linux and the Island processor. This provides great flexibility to re-purpose the Island IOs for regular TLMM usecases.2 new bits are added to
ctl_reg,egpio_presentis a read only bit which shows if egpio feature is available or not on a given gpio.egpio_enableis the read/write bit and only effective ifegpio_presentis 1. Once its set, the Island IO is controlled from Chip TLMM.egpio_enablewhen set to 0 means the GPIO is used as Island Domain IO.
Quoted 6 lines
To support this we add a new function 'egpio' which can be used to set the
egpio_enableto 0, for any other TLMM controlled functions we set theegpio_enableto 1.Signed-off-by Prasad Sodagudi <[email protected]>Signed-off-by Rajendra Nayak <[email protected]>
This patch 1/2 does not have Bjorn's ACK but since he acked patch 2 I just applied both anyway, Bjorn if you don't like this just tell me and I pull them out again.
Yours,
Linus Walleij