Skip to contentSkip to conversation

patch "serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array" added to tty-linus

PATCH [email protected] 1 participant 1 message Nov 25, 2021

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array

to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From c525c5d2437f93520388920baac6d9340c65d239 Mon Sep 17 00:00:00 2001
From: Jay Dolan <[email protected]>
Date: Mon, 22 Nov 2021 14:06:03 +0200
Subject: serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array

Fix error in table for PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S that caused it and PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 to be missing their fourth port.

Fixes 78d3820b9bd3 ("serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()")
Cc stable <[email protected]>
---
 drivers/tty/serial/8250/8250_pci.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/tty/serial/8250/8250_pci.c +8 -1
index 5d43de143f33..b793d848aeb6 100644
@@ -2291,12 +2291,19 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.setup      = pci_pericom_setup_four_at_eight,
 	},
 	{
-		.vendor     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
 		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
 		.subvendor  = PCI_ANY_ID,
 		.subdevice  = PCI_ANY_ID,
 		.setup      = pci_pericom_setup_four_at_eight,
 	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
 	{
 		.vendor     = PCI_VENDOR_ID_ACCESIO,
 		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
Signature · 1 line
2.34.0