Skip to contentSkip to conversation

rndis_host: support Hytera digital radios

PATCH Applied Thomas Toye 2 participants 2 messages Jan 1, 2022 – Jan 2, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 rndis_host: support Hytera digital radios

Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS.

This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?").

This patch is similar to the solution of this StackOverflow user, but that only works for the Hytera MD785:
https://stackoverflow.com/a/53550858

To use the "Radio to PC Network" functionality of Hytera DMR radios, the radios need to be programmed correctly in CPS (Hytera's Customer Programming Software). "Forward to PC" should be checked in "Network" (under "General Setting" in "Conventional") and the "USB Network Communication Protocol" should be set to RNDIS.

---
 drivers/net/usb/rndis_host.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/usb/rndis_host.c +5 -0
index 4a84f90e377c..247f58cb0f84 100644
@@ -608,6 +608,11 @@ static const struct usb_device_id	products [] = {
 	USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0042,
 				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
 	.driver_info = (unsigned long) &rndis_poll_status_info,
+}, {
+	/* Hytera Communications DMR radios' "Radio to PC Network" */
+	USB_VENDOR_AND_INTERFACE_INFO(0x238b,
+				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+	.driver_info = (unsigned long)&rndis_info,
 }, {
 	/* RNDIS is MSFT's un-official variant of CDC ACM */
 	USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
Signature · 1 line
2.31.1
#1 lore raw
This patch was applied to netdev/net.git (master) by David S. Miller <[email protected]>:

Hello:

This patch was applied to netdev/net.git (master)
by David S. Miller <[email protected]>:

Quoted 4 lines · On Sat, 1 Jan 2022 18:22:07 +0100 you wrote:

Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS.

Quoted 8 lines

This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?").

[...]

Here is the summary with links:
- rndis_host: support Hytera digital radios

    https://git.kernel.org/netdev/net/c/29262e1f773b

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html