Skip to contentSkip to conversation

How to store the latest image without modifying videobuf-core.c

DISCUSSION Mattias Persson 2 participants 2 messages Oct 12, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi,

I am developing a driver for a camera. As an example I am using the vivi driver (2.6.28) and the first major difference between my ISR and thread_tick() is that my driver will always attempt to store the latest image, even if nobody is waiting for a new image.

In my driver, when all queued buffers are used any new images will be stored in the oldest frame which has already been captured (state == VIDEOBUF_DONE) and here is where my problems start. (If this is wrong, what shall I do to always keep the latest captured image?)

In the function videobuf_dqbuf in videobuf-core.c, if a new image is returned by stream_next_buffer and the ISR kicks in before videobuf_dqbuf can set buf->state to VIDEOBUF_IDLE, my driver will modify the image presented to userspace and that is not acceptable.

The only solution I can find is to use the spinlock in videobuf_queue when the userspace application is requesting a new image (DQBUF/poll) to check for a new image and set some flag indicating that the buffer can't be overwritten by the ISR. However, this approach would require changes to videobuf-core.c and that doesn't seem right. Can someone please give me some guidance on this?

Regards,
Mattias

      __________________________________________________________

Ta semester! - sök efter resor hos Kelkoo.
Jämför pris på flygbiljetter och hotellrum här:
http://www.kelkoo.se/c-169901-resor-biljetter.html?partnerId=96914052

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#1 lore raw
Quoted 2 lines · Mattias Persson

Hi,

Please send messages to the new mailing list:
[email protected] from now on.

Quoted 1 line

I am developing a driver for a camera. As an example I am using the vivi driver (2.6.28) and the first major difference between my ISR and thread_tick() is that my driver will always attempt to store the latest image, even if nobody is waiting for a new image.

I believe the standard here is that your driver should simply drop the frame if no one is waiting for it.

Quoted 3 lines

In my driver, when all queued buffers are used any new images will be stored in the oldest frame which has already been captured (state == VIDEOBUF_DONE) and here is where my problems start. (If this is wrong, what shall I do to always keep the latest captured image?)

If no one wants the image you should just drop it but note that it existed. I believe the v4l2 api has frame counters so that the application knows that it missed some.

Quoted 1 line

In the function videobuf_dqbuf in videobuf-core.c, if a new image is returned by stream_next_buffer and the ISR kicks in before videobuf_dqbuf can set buf->state to VIDEOBUF_IDLE, my driver will modify the image presented to userspace and that is not acceptable.

Correct, it's not acceptable to modify userspace memory when not asked to do so.

Quoted 5 lines

The only solution I can find is to use the spinlock in videobuf_queue when the userspace application is requesting a new image (DQBUF/poll) to check for a new image and set some flag indicating that the buffer can't be overwritten by the ISR. However, this approach would require changes to videobuf-core.c and that doesn't seem right. Can someone please give me some guidance on this?

Regards,
Mattias

You might want to take a look at possibly using gspca as a base for your driver. It currently supports hundreds of cameras and there are quite a few drivers that you can use as a reference. gspca doesn't use videobuf.. but should make it less painful to write a driver.

Regards,

David Ellingsworth