mmc: tegra: Enable wake on SD card event
Subsystems (3)
PATCH 1/1 mmc: tegra: Enable wake on SD card event
Enable GPIO wake source on SD card detect line. Physical card insertion/removal event should wake the system from suspend.
Signed-off-by Aniruddha Rao <[email protected]>
--- drivers/mmc/host/sdhci-tegra.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-tegra.c +8 -1
@@ -1673,6 +1673,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev)/* HW busy detection is supported, but R1B responses are required. */ host->mmc->caps |=MMC_CAP_WAIT_WHILE_BUSY |MMC_CAP_NEED_RSP_BUSY ; +/* GPIO CD can be set as a wakeup source */ + host->mmc->caps |=MMC_CAP_CD_WAKE ; +tegra_sdhci_parse_dt (host); tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
@@ -1840,7 +1843,7 @@ static int sdhci_tegra_suspend(struct device *dev)return ret; } -return 0 ; +return mmc_gpio_set_cd_wake (host->mmc, true); }static int sdhci_tegra_resume (struct device *dev)
@@ -1848,6 +1851,10 @@ static int sdhci_tegra_resume(struct device *dev)struct sdhci_host *host =dev_get_drvdata (dev);int ret; + ret =mmc_gpio_set_cd_wake (host->mmc, false); +if (ret) +return ret; + ret =pm_runtime_force_resume (dev);if (ret)return ret;
Signature · 1 line
2.7.4
Quoted 5 lines · Aniruddha Rao
Enable GPIO wake source on SD card detect line. Physical card insertion/removal event should wake the system from suspend.
Signed-off-by Aniruddha Rao <[email protected]>
Acked-by Adrian Hunter <[email protected]>
Quoted 39 lines
--- drivers/mmc/host/sdhci-tegra.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)drivers/mmc/host/sdhci-tegra.c +8
-1@@ -1673,6 +1673,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev)/* HW busy detection is supported, but R1B responses are required. */ host->mmc->caps |=MMC_CAP_WAIT_WHILE_BUSY |MMC_CAP_NEED_RSP_BUSY ; +/* GPIO CD can be set as a wakeup source */ + host->mmc->caps |=MMC_CAP_CD_WAKE ; +tegra_sdhci_parse_dt (host); tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",@@ -1840,7 +1843,7 @@ static int sdhci_tegra_suspend(struct device *dev)return ret; } -return 0 ; +return mmc_gpio_set_cd_wake (host->mmc, true); }static int sdhci_tegra_resume (struct device *dev)@@ -1848,6 +1851,10 @@ static int sdhci_tegra_resume(struct device *dev)struct sdhci_host *host =dev_get_drvdata (dev);int ret; + ret =mmc_gpio_set_cd_wake (host->mmc, false); +if (ret) +return ret; + ret =pm_runtime_force_resume (dev);if (ret)return ret;
Quoted 6 lines · Aniruddha Rao
Enable GPIO wake source on SD card detect line. Physical card insertion/removal event should wake the system from suspend.
Signed-off-by Aniruddha Rao <[email protected]>
Applied for next, thanks!
Kind regards
Uffe
Quoted 41 lines
--- drivers/mmc/host/sdhci-tegra.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)drivers/mmc/host/sdhci-tegra.c +8
-2@@ -1673,6 +1673,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev)/* HW busy detection is supported, but R1B responses are required. */ host->mmc->caps |=MMC_CAP_WAIT_WHILE_BUSY |MMC_CAP_NEED_RSP_BUSY ; +/* GPIO CD can be set as a wakeup source */ + host->mmc->caps |=MMC_CAP_CD_WAKE ; +tegra_sdhci_parse_dt (host); tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",@@ -1840,7 +1843,7 @@ static int sdhci_tegra_suspend(struct device *dev)return ret; } -return 0 ; +return mmc_gpio_set_cd_wake (host->mmc, true); }static int sdhci_tegra_resume (struct device *dev)@@ -1848,6 +1851,10 @@ static int sdhci_tegra_resume(struct device *dev)struct sdhci_host *host =dev_get_drvdata (dev);int ret; + ret =mmc_gpio_set_cd_wake (host->mmc, false); +if (ret) +return ret; + ret =pm_runtime_force_resume (dev);if (ret)return ret; --2.7.4