Skip to contentSkip to conversation

Fix PTP issue in stmmac

PATCH Applied Mohammad Athari Bin Ismail 2 participants 4 messages Jan 26, 2022 – Jan 27, 2022

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

cover Fix PTP issue in stmmac

This patch series to fix PTP issue in stmmac related to:
1/ PTP clock source configuration during initialization. 2/ PTP initialization during resume from suspend.

Mohammad Athari Bin Ismail (2):
net: stmmac: configure PTP clock source prior to PTP initialization
net: stmmac: skip only stmmac_ptp_register when resume from suspend

 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 23 ++++++++++---------
 .../net/ethernet/stmicro/stmmac/stmmac_ptp.c  |  3 ---
 2 files changed, 12 insertions(+), 14 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/2 net: stmmac: configure PTP clock source prior to PTP initialization

For Intel platform, it is required to configure PTP clock source prior PTP initialization in MAC. So, need to move ptp_clk_freq_config execution from stmmac_ptp_register() to stmmac_init_ptp().

Fixes 76da35dc99af ("stmmac: intel: Add PSE and PCH PTP clock source selection")
Cc <[email protected]> # 5.15.x
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c  | 3 ---
 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +3 -0
index 6708ca2aa4f7..d7e261768f73 100644
@@ -889,6 +889,9 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
 	bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 	int ret;
 
+	if (priv->plat->ptp_clk_freq_config)
+		priv->plat->ptp_clk_freq_config(priv);
+
 	ret = stmmac_init_tstamp_counter(priv, STMMAC_HWTS_ACTIVE);
 	if (ret)
 		return ret;
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +0 -3
index 0d24ebd37873..1c9f02f9c317 100644
@@ -297,9 +297,6 @@ void stmmac_ptp_register(struct stmmac_priv *priv)
 {
 	int i;
 
-	if (priv->plat->ptp_clk_freq_config)
-		priv->plat->ptp_clk_freq_config(priv);
-
 	for (i = 0; i < priv->dma_cap.pps_out_num; i++) {
 		if (i >= STMMAC_PPS_MAX)
 			break;
Signature · 1 line
2.17.1
#2 lore raw

PATCH v3 2/2 net: stmmac: skip only stmmac_ptp_register when resume from suspend

In reply to Mohammad Athari Bin Ismail

When resume from suspend, besides skipping PTP registration, it also skipping PTP HW initialization. This could cause PTP clock not able to operate properly when resume from suspend.

To fix this, only stmmac_ptp_register() is skipped when resume from suspend.

Fixes fe1319291150 ("stmmac: Don't init ptp again when resume from suspend/hibernation")
Cc <[email protected]> # 5.15.x

---
v3 changelog:
- Move the stmmac_ptp_register() call out to stmmac_hw_setup(). Commented by Jakub Kicinski <[email protected]>.

v2 changelog:
- Fix build warning related to "function parameter or member not described".

---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 20 +++++++++----------
 1 file changed, 9 insertions(+), 11 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +9 -11
index d7e261768f73..dfda1cbf81ae 100644
@@ -914,8 +914,6 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
 	priv->hwts_tx_en = 0;
 	priv->hwts_rx_en = 0;
 
-	stmmac_ptp_register(priv);
-
 	return 0;
 }
 
@@ -3241,7 +3239,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
 /**
  * stmmac_hw_setup - setup mac in a usable state.
  *  @dev : pointer to the device structure.
- *  @init_ptp: initialize PTP if set
+ *  @ptp_register: register PTP if set
  *  Description:
  *  this is the main function to setup the HW in a usable state because the
  *  dma engine is reset, the core registers are configured (e.g. AXI,
@@ -3251,7 +3249,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
  *  0 on success and an appropriate (-)ve integer as defined in errno.h
  *  file on failure.
  */
-static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
+static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 rx_cnt = priv->plat->rx_queues_to_use;
@@ -3308,13 +3306,13 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 
 	stmmac_mmc_setup(priv);
 
-	if (init_ptp) {
-		ret = stmmac_init_ptp(priv);
-		if (ret == -EOPNOTSUPP)
-			netdev_warn(priv->dev, "PTP not supported by HW\n");
-		else if (ret)
-			netdev_warn(priv->dev, "PTP init failed\n");
-	}
+	ret = stmmac_init_ptp(priv);
+	if (ret == -EOPNOTSUPP)
+		netdev_warn(priv->dev, "PTP not supported by HW\n");
+	else if (ret)
+		netdev_warn(priv->dev, "PTP init failed\n");
+	else if (ptp_register)
+		stmmac_ptp_register(priv);
 
 	priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS;
 
Signature · 1 line
2.17.1
#3 lore raw
In reply to Mohammad Athari Bin Ismail
This series was applied to netdev/net.git (master) by David S. Miller <[email protected]>:

Hello:

This series was applied to netdev/net.git (master) by David S. Miller <[email protected]>:

Quoted 9 lines · On Wed, 26 Jan 2022 17:47:21 +0800 you wrote:

This patch series to fix PTP issue in stmmac related to:
1/ PTP clock source configuration during initialization. 2/ PTP initialization during resume from suspend.

Mohammad Athari Bin Ismail (2):
net: stmmac: configure PTP clock source prior to PTP initialization
net: stmmac: skip only stmmac_ptp_register when resume from suspend

[...]

Here is the summary with links:
- [net,1/2] net: stmmac: configure PTP clock source prior to PTP initialization

    https://git.kernel.org/netdev/net/c/94c82de43e01
  - [net,v3,2/2] net: stmmac: skip only stmmac_ptp_register when resume from suspend
    https://git.kernel.org/netdev/net/c/0735e639f129

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html