Linux 5.4.182
Greg Kroah-Hartman
maintainerI'm announcing the release of the 5.4.182 kernel.
All users of the 5.4 kernel series must upgrade.
The updated 5.4.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.4.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2 arch/parisc/kernel/unaligned.c | 14 +- arch/x86/include/asm/fpu/internal.h | 13 +- arch/x86/kernel/process_32.c | 6 - arch/x86/kernel/process_64.c | 6 - drivers/ata/pata_hpt37x.c | 14 ++ drivers/clk/ingenic/jz4725b-cgu.c | 3 drivers/gpio/gpio-tegra186.c | 14 +- drivers/gpu/drm/amd/amdgpu/soc15.c | 5 drivers/gpu/drm/drm_edid.c | 2 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c | 37 ++---- drivers/iio/accel/bmc150-accel-core.c | 5 drivers/iio/accel/kxcjk-1013.c | 5 drivers/iio/accel/mma9551.c | 5 drivers/iio/accel/mma9553.c | 5 drivers/iio/adc/ad7124.c | 2 drivers/iio/adc/men_z188_adc.c | 9 + drivers/iio/gyro/bmg160_core.c | 5 drivers/iio/imu/kmx61.c | 5 drivers/iio/magnetometer/bmc150_magn.c | 5 drivers/infiniband/ulp/srp/ib_srp.c | 6 - drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 drivers/net/ethernet/microchip/lan743x_main.c | 12 -- drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c | 4 drivers/net/ethernet/xilinx/ll_temac_main.c | 2 drivers/net/usb/cdc_ether.c | 12 ++ drivers/net/usb/sr9700.c | 2 drivers/net/usb/zaurus.c | 12 ++ drivers/spi/spi-zynq-qspi.c | 3 drivers/tee/optee/core.c | 8 + drivers/tee/optee/optee_private.h | 2 drivers/tee/optee/rpc.c | 8 - drivers/tee/tee_core.c | 6 - drivers/tty/n_gsm.c | 11 + drivers/usb/dwc3/dwc3-pci.c | 4 drivers/usb/dwc3/gadget.c | 2 drivers/usb/gadget/function/rndis.c | 8 + drivers/usb/gadget/function/rndis.h | 1 drivers/usb/gadget/udc/udc-xilinx.c | 6 + drivers/usb/host/xhci.c | 28 +++- drivers/usb/serial/ch341.c | 1 drivers/usb/serial/option.c | 12 ++ drivers/vhost/vsock.c | 21 ++- fs/configfs/dir.c | 14 ++ fs/file.c | 73 ++++++++++--- fs/tracefs/inode.c | 5 include/linux/tee_drv.h | 14 ++ include/net/checksum.h | 46 ++++---- include/net/netfilter/nf_tables.h | 2 include/net/netfilter/nf_tables_offload.h | 2 kernel/cgroup/cpuset.c | 2 kernel/trace/trace_events_trigger.c | 52 ++++++++- mm/memblock.c | 10 + net/core/filter.c | 3 net/core/skbuff.c | 4 net/ipv4/af_inet.c | 5 net/ipv4/ping.c | 1 net/ipv6/ip6_offload.c | 2 net/netfilter/nf_tables_api.c | 13 +- net/netfilter/nf_tables_offload.c | 3 net/netfilter/nft_dup_netdev.c | 6 + net/netfilter/nft_fwd_netdev.c | 6 + net/netfilter/nft_immediate.c | 12 +- net/openvswitch/actions.c | 46 ++++++-- net/tipc/name_table.c | 2 net/tipc/socket.c | 2 tools/perf/util/data.c | 7 - 69 files changed, 494 insertions(+), 179 deletions(-)
Alexey Bayduraev (1):
perf data: Fix double free in perf_session__delete()
Ariel Levkovich (1):
net/mlx5: Fix wrong limitation of metadata match on ecpf
Bart Van Assche (1):
RDMA/ib_srp: Fix a deadlock
Brian Geffon (1):
x86/fpu: Correct pkru/xstate inconsistency
ChenXiaoSong (1):
configfs: fix a race in configfs_{,un}register_subsystem()
Christophe JAILLET (2):
nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac()
iio: adc: men_z188_adc: Fix a resource leak in an error handling path
Christophe Leroy (1):
net: Force inlining of checksum functions in net/checksum.h
Cosmin Tanislav (1):
iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
Daehwan Jung (1):
usb: gadget: rndis: add spinlock for rndis response list
Dan Carpenter (1):
tipc: Fix end of loop tests for list_for_each_entry()
Daniele Palmas (1):
USB: serial: option: add Telit LE910R1 compositions
Dmytro Bagrii (1):
Revert "USB: serial: ch341: add new Product ID for CH341A"
Eric Dumazet (1):
net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends
Evan Quan (1):
drm/amdgpu: disable MMHUB PG for Picasso
Felix Maurer (1):
bpf: Do not try bpf_msg_push_data with len 0
Florian Westphal (1):
netfilter: nf_tables: fix memory leak during stateful obj update
Gal Pressman (1):
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
Greg Kroah-Hartman (1):
Linux 5.4.182
Hans de Goede (1):
usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
Heiner Kallweit (1):
lan743x: fix deadlock in lan743x_phy_link_status_change()
Helge Deller (2):
parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel parisc/unaligned: Fix ldw() and stw() unalignment handlers
Hongyu Xie (1):
xhci: Prevent futile URB re-submissions due to incorrect return value.
Jens Wiklander (2):
tee: export teedev_open() and teedev_close_context()
optee: use driver internal tee_context for some rpc
Karol Herbst (1):
Revert "drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR"
Linus Torvalds (1):
fget: clarify and improve __fget_files() implementation
Maor Gottlieb (1):
net/mlx5: Fix possible deadlock on rule deletion
Marc Zyngier (1):
gpio: tegra186: Fix chip_data type confusion
Maxime Ripard (1):
drm/edid: Always set RGB444
Miaohe Lin (1):
memblock: use kfree() to release kmalloced memblock regions
Miaoqian Lin (1):
iio: Fix error handling for PM
Oliver Neukum (2):
sr9700: sanity check for packet length
USB: zaurus: support another broken Zaurus
Pablo Neira Ayuso (1):
netfilter: nf_tables_offload: incorrect flow offload action array size
Paul Blakey (1):
openvswitch: Fix setting ipv6 fields causing hw csum failure
Puma Hsu (1):
xhci: re-initialize the HC during resume if HCE was set
Sebastian Andrzej Siewior (1):
usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
Sergey Shtylyov (1):
ata: pata_hpt37x: disable primary channel on HPT371
Siarhei Volkau (1):
clk: jz4725b: fix mmc0 clock gating
Slark Xiao (1):
USB: serial: option: add support for DW5829e
Stefano Garzarella (1):
vhost/vsock: don't check owner in vhost_vsock_stop() while releasing
Steven Rostedt (Google) (2):
tracing: Have traceon and traceoff trigger honor the instance
tracefs: Set the group ownership in apply_options() not parse_options()
Szymon Heidrich (1):
USB: gadget: validate endpoint index for xilinx udc
Tao Liu (1):
gso: do not skip outer ip header in case of ipip and net_failover
Xiaoke Wang (1):
net: ll_temac: check the return value of devm_kmalloc()
Xin Long (1):
ping: remove pr_err from ping_lookup
Zhang Qiao (1):
cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
Zhou Qingyang (1):
spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()
[email protected] (3):
tty: n_gsm: fix encoding of control signal octet bit DV
tty: n_gsm: fix proper link termination after failed open
tty: n_gsm: fix NULL pointer access due to DLCI release
Greg Kroah-Hartman
maintainerMakefile +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 4 -SUBLEVEL = 181 +SUBLEVEL = 182 EXTRAVERSION = NAME = Kleptomaniac Octopus
arch/parisc/kernel/unaligned.c +7 -7
@@ -340,7 +340,7 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop) : "r" (val), "r" (regs->ior), "r" (regs->isr) : "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER ); -return 0 ; +return ret; }static int emulate_std (struct pt_regs *regs,int frreg,int flop) {
@@ -397,7 +397,7 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop) __asm__ __volatile__ (" mtsp %4, %%sr1\n" " zdep %2, 29, 2, %%r19\n" -" dep %%r0, 31, 2, %2\n" +" dep %%r0, 31, 2, %3\n" " mtsar %%r19\n" " zvdepi -2, 32, %%r19\n" "1: ldw 0(%%sr1,%3),%%r20\n"
@@ -409,7 +409,7 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)" andcm %%r21, %%r19, %%r21\n" " or %1, %%r20, %1\n" " or %2, %%r21, %2\n" -"3: stw %1,0(%%sr1,%1)\n" +"3: stw %1,0(%%sr1,%3)\n" "4: stw %%r1,4(%%sr1,%3)\n" "5: stw %2,8(%%sr1,%3)\n" " copy %%r0, %0\n"
@@ -596,7 +596,6 @@ void handle_unaligned(struct pt_regs *regs) ret =ERR_NOTHANDLED ;/* "undefined", but lets kill them. */ break ; } -#ifdef CONFIG_PA20 switch (regs->iir &OPCODE2_MASK ) {case OPCODE_FLDD_L :
@@ -607,22 +606,23 @@ void handle_unaligned(struct pt_regs *regs) flop=1 ; ret =emulate_std (regs,R2 (regs->iir),1 );break ; +#ifdef CONFIG_PA20 case OPCODE_LDD_L : ret =emulate_ldd (regs,R2 (regs->iir),0 );break ;case OPCODE_STD_L : ret =emulate_std (regs,R2 (regs->iir),0 );break ; - }#endif + }switch (regs->iir &OPCODE3_MASK ) {case OPCODE_FLDW_L : flop=1 ; - ret =emulate_ldw (regs,R2 (regs->iir),0 ); + ret =emulate_ldw (regs,R2 (regs->iir),1 );break ;case OPCODE_LDW_M : - ret =emulate_ldw (regs,R2 (regs->iir),1 ); + ret =emulate_ldw (regs,R2 (regs->iir),0 );break ;case OPCODE_FSTW_L :
arch/x86/include/asm/fpu/internal.h +8 -5
@@ -560,9 +560,11 @@ static inline void __fpregs_load_activate(void)* The FPU context is only stored/restored for a user task and * PF_KTHREAD is used to distinguish between kernel and user threads. */ -static inline void switch_fpu_prepare (struct fpu *old_fpu,int cpu) +static inline void switch_fpu_prepare (struct task_struct *prev,int cpu) { -if (static_cpu_has (X86_FEATURE_FPU ) && !(current->flags &PF_KTHREAD )) { +struct fpu *old_fpu = &prev->thread.fpu; + +if (static_cpu_has (X86_FEATURE_FPU ) && !(prev->flags &PF_KTHREAD )) {if (!copy_fpregs_to_fpstate (old_fpu)) old_fpu->last_cpu =-1 ;else
@@ -581,10 +583,11 @@ static inline void switch_fpu_prepare(struct fpu *old_fpu, int cpu)* Load PKRU from the FPU context if available. Delay loading of the * complete FPU state until the return to userland. */ -static inline void switch_fpu_finish (struct fpu *new_fpu) +static inline void switch_fpu_finish (struct task_struct *next) {u32 pkru_val = init_pkru_value;struct pkru_state *pk; +struct fpu *next_fpu = &next->thread.fpu;if (!static_cpu_has (X86_FEATURE_FPU ))return ;
@@ -598,7 +601,7 @@ static inline void switch_fpu_finish(struct fpu *new_fpu)* PKRU state is switched eagerly because it needs to be valid before we * return to userland e.g. for a copy_to_user() operation. */ -if (!(current->flags &PF_KTHREAD )) { +if (!(next->flags &PF_KTHREAD )) {/* * If the PKRU bit in xsave.header.xfeatures is not set, * then the PKRU component was in init state, which means
@@ -607,7 +610,7 @@ static inline void switch_fpu_finish(struct fpu *new_fpu)* in memory is not valid. This means pkru_val has to be * set to 0 and not to init_pkru_value. */ - pk =get_xsave_addr (&new_fpu->state.xsave,XFEATURE_PKRU ); + pk =get_xsave_addr (&next_fpu->state.xsave,XFEATURE_PKRU ); pkru_val = pk ? pk->pkru :0 ; }__write_pkru (pkru_val);
arch/x86/kernel/process_32.c +2 -4
@@ -229,14 +229,12 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) {struct thread_struct *prev = &prev_p->thread, *next = &next_p->thread; -struct fpu *prev_fpu = &prev->fpu; -struct fpu *next_fpu = &next->fpu;int cpu =smp_processor_id ();/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ if (!test_thread_flag (TIF_NEED_FPU_LOAD )) -switch_fpu_prepare (prev_fpu, cpu); +switch_fpu_prepare (prev_p, cpu);/* * Save away %gs. No need to save %fs, as it was saved on the
@@ -292,7 +290,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)this_cpu_write (current_task, next_p); -switch_fpu_finish (next_fpu); +switch_fpu_finish (next_p);/* Load the Intel cache allocation PQR MSR. */ resctrl_sched_in ();
arch/x86/kernel/process_64.c +2 -4
@@ -505,15 +505,13 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) {struct thread_struct *prev = &prev_p->thread;struct thread_struct *next = &next_p->thread; -struct fpu *prev_fpu = &prev->fpu; -struct fpu *next_fpu = &next->fpu;int cpu =smp_processor_id ();WARN_ON_ONCE (IS_ENABLED (CONFIG_DEBUG_ENTRY ) &&this_cpu_read (irq_count) !=-1 );if (!test_thread_flag (TIF_NEED_FPU_LOAD )) -switch_fpu_prepare (prev_fpu, cpu); +switch_fpu_prepare (prev_p, cpu);/* We must save %fs and %gs before load_TLS() because * %fs and %gs may be cleared by load_TLS().
@@ -565,7 +563,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)this_cpu_write (current_task, next_p);this_cpu_write (cpu_current_top_of_stack,task_top_of_stack (next_p)); -switch_fpu_finish (next_fpu); +switch_fpu_finish (next_p);/* Reload sp0. */ update_task_stack (next_p);
drivers/ata/pata_hpt37x.c +14 -0
@@ -917,6 +917,20 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) irqmask &= ~0x10 ;pci_write_config_byte (dev,0x5a , irqmask); +/* +* HPT371 chips physically have only one channel, the secondary one, +* but the primary channel registers do exist! Go figure... +* So, we manually disable the non-existing channel here +* (if the BIOS hasn't done this already). +*/ +if (dev->device ==PCI_DEVICE_ID_TTI_HPT371 ) { +u8 mcr1; + +pci_read_config_byte (dev,0x50 , &mcr1); + mcr1 &= ~0x04 ; +pci_write_config_byte (dev,0x50 , mcr1); + } +/* * default to pci clock. make sure MA15/16 are set to output * to prevent drives having problems with 40-pin cables. Needed
drivers/clk/ingenic/jz4725b-cgu.c +1 -2
@@ -135,11 +135,10 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = { }, [JZ4725B_CLK_I2S] = { -"i2s" ,CGU_CLK_MUX |CGU_CLK_DIV |CGU_CLK_GATE , +"i2s" ,CGU_CLK_MUX |CGU_CLK_DIV , .parents = { JZ4725B_CLK_EXT, JZ4725B_CLK_PLL_HALF, -1, -1 }, .mux = { CGU_REG_CPCCR, 31, 1 }, .div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 }, - .gate = { CGU_REG_CLKGR, 6 }, }, [JZ4725B_CLK_SPI] = {
drivers/gpio/gpio-tegra186.c +10 -4
@@ -234,9 +234,12 @@ static int tegra186_gpio_of_xlate(struct gpio_chip *chip,return offset + pin; } +#define to_tegra_gpio (x) container_of((x), struct tegra_gpio, gpio) +static void tegra186_irq_ack (struct irq_data *data) { -struct tegra_gpio *gpio =irq_data_get_irq_chip_data (data); +struct gpio_chip *gc =irq_data_get_irq_chip_data (data); +struct tegra_gpio *gpio =to_tegra_gpio (gc);void __iomem *base; base =tegra186_gpio_get_base (gpio, data->hwirq);
@@ -248,7 +251,8 @@ static void tegra186_irq_ack(struct irq_data *data)static void tegra186_irq_mask (struct irq_data *data) { -struct tegra_gpio *gpio =irq_data_get_irq_chip_data (data); +struct gpio_chip *gc =irq_data_get_irq_chip_data (data); +struct tegra_gpio *gpio =to_tegra_gpio (gc);void __iomem *base;u32 value;
@@ -263,7 +267,8 @@ static void tegra186_irq_mask(struct irq_data *data)static void tegra186_irq_unmask (struct irq_data *data) { -struct tegra_gpio *gpio =irq_data_get_irq_chip_data (data); +struct gpio_chip *gc =irq_data_get_irq_chip_data (data); +struct tegra_gpio *gpio =to_tegra_gpio (gc);void __iomem *base;u32 value;
@@ -278,7 +283,8 @@ static void tegra186_irq_unmask(struct irq_data *data)static int tegra186_irq_set_type (struct irq_data *data,unsigned int type) { -struct tegra_gpio *gpio =irq_data_get_irq_chip_data (data); +struct gpio_chip *gc =irq_data_get_irq_chip_data (data); +struct tegra_gpio *gpio =to_tegra_gpio (gc);void __iomem *base;u32 value;
drivers/gpu/drm/amd/amdgpu/soc15.c +4 -1
@@ -1143,8 +1143,11 @@ static int soc15_common_early_init(void *handle)AMD_CG_SUPPORT_SDMA_MGCG |AMD_CG_SUPPORT_SDMA_LS ; +/* +* MMHUB PG needs to be disabled for Picasso for +* stability reasons. +*/ adev->pg_flags =AMD_PG_SUPPORT_SDMA | -AMD_PG_SUPPORT_MMHUB |AMD_PG_SUPPORT_VCN ; }else { adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG |
drivers/gpu/drm/drm_edid.c +1 -1
@@ -4659,6 +4659,7 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *ediif (!(edid->input &DRM_EDID_INPUT_DIGITAL ))return quirks; + info->color_formats |=DRM_COLOR_FORMAT_RGB444 ;drm_parse_cea_ext (connector, edid);/*
@@ -4707,7 +4708,6 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *ediDRM_DEBUG ("%s: Assigning EDID-1.4 digital sink color depth as %d bpc.\n" , connector->name, info->bpc); - info->color_formats |=DRM_COLOR_FORMAT_RGB444 ;if (edid->features &DRM_EDID_FEATURE_RGB_YCRCB444 ) info->color_formats |=DRM_COLOR_FORMAT_YCRCB444 ;if (edid->features &DRM_EDID_FEATURE_RGB_YCRCB422 )
drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c +16 -21
@@ -88,13 +88,20 @@ nvkm_pmu_fini(struct nvkm_subdev *subdev, bool suspend)return 0 ; } -static void +static int nvkm_pmu_reset (struct nvkm_pmu *pmu) {struct nvkm_device *device = pmu->subdev.device;if (!pmu->func->enabled (pmu)) -return ; +return 0 ; + +/* Inhibit interrupts, and wait for idle. */ +nvkm_wr32 (device,0x10a014 ,0x0000ffff ); +nvkm_msec (device,2000 , + if (!nvkm_rd32(device, 0x10a04c)) + break; + );/* Reset. */ if (pmu->func->reset)
@@ -105,37 +112,25 @@ nvkm_pmu_reset(struct nvkm_pmu *pmu)if (!(nvkm_rd32 (device,0x10a10c ) &0x00000006 ))break ; ); + +return 0 ; }static int nvkm_pmu_preinit (struct nvkm_subdev *subdev) {struct nvkm_pmu *pmu =nvkm_pmu (subdev); -nvkm_pmu_reset (pmu); -return 0 ; +return nvkm_pmu_reset (pmu); }static int nvkm_pmu_init (struct nvkm_subdev *subdev) {struct nvkm_pmu *pmu =nvkm_pmu (subdev); -struct nvkm_device *device = pmu->subdev.device; - -if (!pmu->func->init) -return 0 ; - -if (pmu->func->enabled (pmu)) { -/* Inhibit interrupts, and wait for idle. */ -nvkm_wr32 (device,0x10a014 ,0x0000ffff ); -nvkm_msec (device,2000 , - if (!nvkm_rd32(device, 0x10a04c)) - break; - ); - -nvkm_pmu_reset (pmu); - } - -return pmu->func->init (pmu); +int ret =nvkm_pmu_reset (pmu); +if (ret ==0 && pmu->func->init) + ret = pmu->func->init (pmu); +return ret; } static int
drivers/iio/accel/bmc150-accel-core.c +4 -1
@@ -1649,11 +1649,14 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, ret =iio_device_register (indio_dev);if (ret <0 ) {dev_err (dev,"Unable to register iio device\n" ); - goto err_trigger_unregister; + goto err_pm_cleanup; }return 0 ; +err_pm_cleanup: +pm_runtime_dont_use_autosuspend (dev); +pm_runtime_disable (dev); err_trigger_unregister:bmc150_accel_unregister_triggers (data,BMC150_ACCEL_TRIGGERS -1 ); err_buffer_cleanup:
drivers/iio/accel/kxcjk-1013.c +4 -1
@@ -1409,11 +1409,14 @@ static int kxcjk1013_probe(struct i2c_client *client, ret =iio_device_register (indio_dev);if (ret <0 ) {dev_err (&client->dev,"unable to register iio device\n" ); - goto err_buffer_cleanup; + goto err_pm_cleanup; }return 0 ; +err_pm_cleanup: +pm_runtime_dont_use_autosuspend (&client->dev); +pm_runtime_disable (&client->dev); err_buffer_cleanup:iio_triggered_buffer_cleanup (indio_dev); err_trigger_unregister:
drivers/iio/accel/mma9551.c +4 -1
@@ -496,11 +496,14 @@ static int mma9551_probe(struct i2c_client *client, ret =iio_device_register (indio_dev);if (ret <0 ) {dev_err (&client->dev,"unable to register iio device\n" ); - goto out_poweroff; + goto err_pm_cleanup; }return 0 ; +err_pm_cleanup: +pm_runtime_dont_use_autosuspend (&client->dev); +pm_runtime_disable (&client->dev); out_poweroff:mma9551_set_device_state (client, false);
drivers/iio/accel/mma9553.c +4 -1
@@ -1135,12 +1135,15 @@ static int mma9553_probe(struct i2c_client *client, ret =iio_device_register (indio_dev);if (ret <0 ) {dev_err (&client->dev,"unable to register iio device\n" ); - goto out_poweroff; + goto err_pm_cleanup; }dev_dbg (&indio_dev->dev,"Registered device %s\n" , name);return 0 ; +err_pm_cleanup: +pm_runtime_dont_use_autosuspend (&client->dev); +pm_runtime_disable (&client->dev); out_poweroff:mma9551_set_device_state (client, false);return ret;
drivers/iio/adc/ad7124.c +1 -1
@@ -63,7 +63,7 @@#define AD7124_CONFIG_REF_SEL (x) FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)#define AD7124_CONFIG_PGA_MSK GENMASK(2, 0)#define AD7124_CONFIG_PGA (x) FIELD_PREP(AD7124_CONFIG_PGA_MSK, x) -#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(7, 6) +#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(6, 5)#define AD7124_CONFIG_IN_BUFF (x) FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x)/* AD7124_FILTER_X */
drivers/iio/adc/men_z188_adc.c +8 -1
@@ -103,6 +103,7 @@ static int men_z188_probe(struct mcb_device *dev,struct z188_adc *adc;struct iio_dev *indio_dev;struct resource *mem; +int ret; indio_dev =devm_iio_device_alloc (&dev->dev,sizeof (struct z188_adc ));if (!indio_dev)
@@ -129,8 +130,14 @@ static int men_z188_probe(struct mcb_device *dev, adc->mem = mem;mcb_set_drvdata (dev, indio_dev); -return iio_device_register (indio_dev); + ret =iio_device_register (indio_dev); +if (ret) + goto err_unmap; + +return 0 ; +err_unmap: +iounmap (adc->base); err:mcb_release_mem (mem);return -ENXIO ;
drivers/iio/gyro/bmg160_core.c +4 -1
@@ -1173,11 +1173,14 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq, ret =iio_device_register (indio_dev);if (ret <0 ) {dev_err (dev,"unable to register iio device\n" ); - goto err_buffer_cleanup; + goto err_pm_cleanup; }return 0 ; +err_pm_cleanup: +pm_runtime_dont_use_autosuspend (dev); +pm_runtime_disable (dev); err_buffer_cleanup:iio_triggered_buffer_cleanup (indio_dev); err_trigger_unregister:
drivers/iio/imu/kmx61.c +4 -1
@@ -1393,7 +1393,7 @@ static int kmx61_probe(struct i2c_client *client, ret =iio_device_register (data->acc_indio_dev);if (ret <0 ) {dev_err (&client->dev,"Failed to register acc iio device\n" ); - goto err_buffer_cleanup_mag; + goto err_pm_cleanup; } ret =iio_device_register (data->mag_indio_dev);
@@ -1406,6 +1406,9 @@ static int kmx61_probe(struct i2c_client *client, err_iio_unregister_acc:iio_device_unregister (data->acc_indio_dev); +err_pm_cleanup: +pm_runtime_dont_use_autosuspend (&client->dev); +pm_runtime_disable (&client->dev); err_buffer_cleanup_mag:if (client->irq >0 )iio_triggered_buffer_cleanup (data->mag_indio_dev);
drivers/iio/magnetometer/bmc150_magn.c +3 -2
@@ -944,13 +944,14 @@ int bmc150_magn_probe(struct device *dev, struct regmap *regmap, ret =iio_device_register (indio_dev);if (ret <0 ) {dev_err (dev,"unable to register iio device\n" ); - goto err_disable_runtime_pm; + goto err_pm_cleanup; }dev_dbg (dev,"Registered device %s\n" , name);return 0 ; -err_disable_runtime_pm: +err_pm_cleanup: +pm_runtime_dont_use_autosuspend (dev);pm_runtime_disable (dev); err_buffer_cleanup:iio_triggered_buffer_cleanup (indio_dev);
drivers/infiniband/ulp/srp/ib_srp.c +4 -2
@@ -4222,9 +4222,11 @@ static void srp_remove_one(struct ib_device *device, void *client_data)spin_unlock (&host->target_lock);/* -* Wait for tl_err and target port removal tasks. +* srp_queue_remove_work() queues a call to +* srp_remove_target(). The latter function cancels +* target->tl_err_work so waiting for the remove works to +* finish is sufficient. */ -flush_workqueue (system_long_wq);flush_workqueue (srp_remove_wq);kfree (host);
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +1 -1
@@ -1683,7 +1683,7 @@ static int mlx5e_get_module_eeprom(struct net_device *netdev,if (size_read <0 ) {netdev_err (priv->netdev,"%s: mlx5_query_eeprom failed:0x%x\n" , __func__, size_read); -return 0 ; +return size_read; } i += size_read;
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +0 -4
@@ -1977,10 +1977,6 @@ esw_check_vport_match_metadata_supported(const struct mlx5_eswitch *esw)if (!MLX5_CAP_ESW_FLOWTABLE (esw->dev, flow_source))return false; -if (mlx5_core_is_ecpf_esw_manager (esw->dev) || -mlx5_ecpf_vport_exists (esw->dev)) -return false; -return true; }
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +2 -0
@@ -1947,6 +1947,8 @@ void mlx5_del_flow_rules(struct mlx5_flow_handle *handle) fte->node.del_hw_func =NULL ;up_write_ref_node (&fte->node, false);tree_put_node (&fte->node, false); + }else { +up_write_ref_node (&fte->node, false); }kfree (handle); }
drivers/net/ethernet/microchip/lan743x_main.c +3 -9
@@ -916,8 +916,7 @@ static int lan743x_phy_reset(struct lan743x_adapter *adapter) }static void lan743x_phy_update_flowcontrol (struct lan743x_adapter *adapter, -u8 duplex,u16 local_adv, -u16 remote_adv) +u16 local_adv,u16 remote_adv) {struct lan743x_phy *phy = &adapter->phy;u8 cap;
@@ -944,22 +943,17 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)phy_print_status (phydev);if (phydev->state ==PHY_RUNNING ) { -struct ethtool_link_ksettings ksettings;int remote_advertisement =0 ;int local_advertisement =0 ; -memset (&ksettings,0 ,sizeof (ksettings)); -phy_ethtool_get_link_ksettings (netdev, &ksettings); local_advertisement =linkmode_adv_to_mii_adv_t (phydev->advertising); remote_advertisement =linkmode_adv_to_mii_adv_t (phydev->lp_advertising); -lan743x_phy_update_flowcontrol (adapter, - ksettings.base.duplex, - local_advertisement, +lan743x_phy_update_flowcontrol (adapter, local_advertisement, remote_advertisement); -lan743x_ptp_update_latency (adapter, ksettings.base.speed); +lan743x_ptp_update_latency (adapter, phydev->speed); } }
drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c +2 -2
@@ -588,8 +588,8 @@ nfp_tunnel_add_shared_mac(struct nfp_app *app, struct net_device *netdev, int port, bool mod) {struct nfp_flower_priv *priv = app->priv; -int ida_idx =NFP_MAX_MAC_INDEX , err;struct nfp_tun_offloaded_mac *entry; +int ida_idx =-1 , err;u16 nfp_mac_idx =0 ; entry =nfp_tunnel_lookup_offloaded_macs (app, netdev->dev_addr);
@@ -663,7 +663,7 @@ nfp_tunnel_add_shared_mac(struct nfp_app *app, struct net_device *netdev, err_free_entry:kfree (entry); err_free_ida: -if (ida_idx !=NFP_MAX_MAC_INDEX ) +if (ida_idx !=-1 )ida_simple_remove (&priv->tun.mac_off_ids, ida_idx);return err;
drivers/net/ethernet/xilinx/ll_temac_main.c +2 -0
@@ -1345,6 +1345,8 @@ static int temac_probe(struct platform_device *pdev) lp->indirect_lock =devm_kmalloc (&pdev->dev,sizeof (*lp->indirect_lock),GFP_KERNEL ); +if (!lp->indirect_lock) +return -ENOMEM ;spin_lock_init (lp->indirect_lock); }
drivers/net/usb/cdc_ether.c +12 -0
@@ -571,6 +571,11 @@ static const struct usb_device_id products[] = { .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE +#define ZAURUS_FAKE_INTERFACE \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE +/* SA-1100 based Sharp Zaurus ("collie"), or compatible; * wire-incompatible with true CDC Ethernet implementations. * (And, it seems, needlessly so...)
@@ -624,6 +629,13 @@ static const struct usb_device_id products[] = { .idProduct = 0x9032, /* SL-6000 */ZAURUS_MASTER_INTERFACE , .driver_info = 0, +}, { + .match_flags =USB_DEVICE_ID_MATCH_INT_INFO + |USB_DEVICE_ID_MATCH_DEVICE , + .idVendor = 0x04DD, + .idProduct = 0x9032, /* SL-6000 */ +ZAURUS_FAKE_INTERFACE , + .driver_info = 0, }, { .match_flags =USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE,
drivers/net/usb/sr9700.c +1 -1
@@ -410,7 +410,7 @@ static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)/* ignore the CRC length */ len = (skb->data[1 ] | (skb->data[2 ] <<8 )) -4 ; -if (len >ETH_FRAME_LEN ) +if (len >ETH_FRAME_LEN || len > skb->len)return 0 ;/* the last packet of current skb */
drivers/net/usb/zaurus.c +12 -0
@@ -256,6 +256,11 @@ static const struct usb_device_id products [] = { .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE +#define ZAURUS_FAKE_INTERFACE \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE +/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
@@ -313,6 +318,13 @@ static const struct usb_device_id products [] = { .idProduct = 0x9032, /* SL-6000 */ZAURUS_MASTER_INTERFACE , .driver_info = ZAURUS_PXA_INFO, +}, { + .match_flags =USB_DEVICE_ID_MATCH_INT_INFO + |USB_DEVICE_ID_MATCH_DEVICE , + .idVendor = 0x04DD, + .idProduct = 0x9032, /* SL-6000 */ +ZAURUS_FAKE_INTERFACE , + .driver_info = (unsigned long)&bogus_mdlm_info, }, { .match_flags =USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE,
drivers/spi/spi-zynq-qspi.c +3 -0
@@ -558,6 +558,9 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,if (op->dummy.nbytes) { tmpbuf =kzalloc (op->dummy.nbytes,GFP_KERNEL ); +if (!tmpbuf) +return -ENOMEM ; +memset (tmpbuf,0xff , op->dummy.nbytes);reinit_completion (&xqspi->data_completion); xqspi->txbuf = tmpbuf;
drivers/tee/optee/core.c +8 -0
@@ -552,6 +552,7 @@ static struct optee *optee_probe(struct device_node *np)struct optee *optee =NULL ;void *memremaped_shm =NULL ;struct tee_device *teedev; +struct tee_context *ctx;u32 sec_caps;int rc;
@@ -631,6 +632,12 @@ static struct optee *optee_probe(struct device_node *np)optee_supp_init (&optee->supp); optee->memremaped_shm = memremaped_shm; optee->pool = pool; + ctx =teedev_open (optee->teedev); +if (IS_ERR (ctx)) { + rc =PTR_ERR (ctx); + goto err; + } + optee->ctx = ctx;/* * Ensure that there are no pre-existing shm objects before enabling
@@ -667,6 +674,7 @@ static struct optee *optee_probe(struct device_node *np)static void optee_remove (struct optee *optee) { +teedev_close_context (optee->ctx);/* * Ask OP-TEE to free all cached shared memory objects to decrease * reference counters and also avoid wild pointers in secure world
drivers/tee/optee/optee_private.h +2 -0
@@ -69,6 +69,7 @@ struct optee_supp {* struct optee - main service struct * @supp_teedev: supplicant device * @teedev: client device +* @ctx: driver internal TEE context * @invoke_fn: function to issue smc or hvc * @call_queue: queue of threads waiting to call @invoke_fn * @wait_queue: queue of threads from secure world waiting for a
@@ -83,6 +84,7 @@ struct optee {struct tee_device *supp_teedev;struct tee_device *teedev;optee_invoke_fn *invoke_fn; +struct tee_context *ctx;struct optee_call_queue call_queue;struct optee_wait_queue wait_queue;struct optee_supp supp;
drivers/tee/optee/rpc.c +5 -3
@@ -191,6 +191,7 @@ static struct tee_shm *cmd_alloc_suppl(struct tee_context *ctx, size_t sz) }static void handle_rpc_func_cmd_shm_alloc (struct tee_context *ctx, +struct optee *optee,struct optee_msg_arg *arg,struct optee_call_ctx *call_ctx) {
@@ -220,7 +221,8 @@ static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx, shm =cmd_alloc_suppl (ctx, sz);break ;case OPTEE_MSG_RPC_SHM_TYPE_KERNEL : - shm =tee_shm_alloc (ctx, sz,TEE_SHM_MAPPED |TEE_SHM_PRIV ); + shm =tee_shm_alloc (optee->ctx, sz, +TEE_SHM_MAPPED |TEE_SHM_PRIV );break ;default : arg->ret =TEEC_ERROR_BAD_PARAMETERS ;
@@ -377,7 +379,7 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,break ;case OPTEE_MSG_RPC_CMD_SHM_ALLOC :free_pages_list (call_ctx); -handle_rpc_func_cmd_shm_alloc (ctx, arg, call_ctx); +handle_rpc_func_cmd_shm_alloc (ctx, optee, arg, call_ctx);break ;case OPTEE_MSG_RPC_CMD_SHM_FREE :handle_rpc_func_cmd_shm_free (ctx, arg);
@@ -405,7 +407,7 @@ void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param,switch (OPTEE_SMC_RETURN_GET_RPC_FUNC (param->a0)) {case OPTEE_SMC_RPC_FUNC_ALLOC : - shm =tee_shm_alloc (ctx, param->a1, + shm =tee_shm_alloc (optee->ctx, param->a1,TEE_SHM_MAPPED |TEE_SHM_PRIV );if (!IS_ERR (shm) && !tee_shm_get_pa (shm,0 , &pa)) {reg_pair_from_64 (¶m->a1, ¶m->a2, pa);
drivers/tee/tee_core.c +4 -2
@@ -28,7 +28,7 @@ static DEFINE_SPINLOCK(driver_lock);static struct class *tee_class;static dev_t tee_devt; -static struct tee_context *teedev_open (struct tee_device *teedev) +struct tee_context *teedev_open (struct tee_device *teedev) {int rc;struct tee_context *ctx;
@@ -56,6 +56,7 @@ static struct tee_context *teedev_open(struct tee_device *teedev)return ERR_PTR (rc); } +EXPORT_SYMBOL_GPL (teedev_open);void teedev_ctx_get (struct tee_context *ctx) {
@@ -82,13 +83,14 @@ void teedev_ctx_put(struct tee_context *ctx)kref_put (&ctx->refcount, teedev_ctx_release); } -static void teedev_close_context (struct tee_context *ctx) +void teedev_close_context (struct tee_context *ctx) {struct tee_device *teedev = ctx->teedev;teedev_ctx_put (ctx);tee_device_put (teedev); } +EXPORT_SYMBOL_GPL (teedev_close_context);static int tee_open (struct inode *inode,struct file *filp) {
drivers/tty/n_gsm.c +8 -3
@@ -428,7 +428,7 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci) modembits |=MDM_RTR ;if (dlci->modem_tx &TIOCM_RI ) modembits |=MDM_IC ; -if (dlci->modem_tx &TIOCM_CD ) +if (dlci->modem_tx &TIOCM_CD || dlci->gsm->initiator) modembits |=MDM_DV ;return modembits; }
@@ -1490,7 +1490,7 @@ static void gsm_dlci_t1(struct timer_list *t) dlci->mode =DLCI_MODE_ADM ;gsm_dlci_open (dlci); }else { -gsm_dlci_close (dlci); +gsm_dlci_begin_close (dlci);/* prevent half open link */ }break ;
@@ -1722,7 +1722,12 @@ static void gsm_dlci_release(struct gsm_dlci *dlci)gsm_destroy_network (dlci);mutex_unlock (&dlci->mutex); -tty_hangup (tty); +/* We cannot use tty_hangup() because in tty_kref_put() the tty +* driver assumes that the hangup queue is free and reuses it to +* queue release_one_tty() -> NULL pointer panic in +* process_one_work(). +*/ +tty_vhangup (tty);tty_port_tty_set (&dlci->port,NULL );tty_kref_put (tty);
drivers/usb/dwc3/dwc3-pci.c +2 -2
@@ -81,8 +81,8 @@ static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {static struct gpiod_lookup_table platform_bytcr_gpios = { .dev_id ="0000:00:16.0" , .table = { -GPIO_LOOKUP ("INT33FC:00" ,54 ,"reset" ,GPIO_ACTIVE_HIGH ), -GPIO_LOOKUP ("INT33FC:02" ,14 ,"cs" ,GPIO_ACTIVE_HIGH ), +GPIO_LOOKUP ("INT33FC:00" ,54 ,"cs" ,GPIO_ACTIVE_HIGH ), +GPIO_LOOKUP ("INT33FC:02" ,14 ,"reset" ,GPIO_ACTIVE_HIGH ), {} }, };
drivers/usb/dwc3/gadget.c +2 -0
@@ -3529,9 +3529,11 @@ static irqreturn_t dwc3_thread_interrupt(int irq, void *_evt)unsigned long flags;irqreturn_t ret =IRQ_NONE ; +local_bh_disable ();spin_lock_irqsave (&dwc->lock, flags); ret =dwc3_process_event_buf (evt);spin_unlock_irqrestore (&dwc->lock, flags); +local_bh_enable ();return ret; }
drivers/usb/gadget/function/rndis.c +8 -0
@@ -922,6 +922,7 @@ struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v) params->resp_avail = resp_avail; params->v = v;INIT_LIST_HEAD (¶ms->resp_queue); +spin_lock_init (¶ms->resp_lock);pr_debug ("%s: configNr = %d\n" , __func__, i);return params;
@@ -1015,12 +1016,14 @@ void rndis_free_response(struct rndis_params *params, u8 *buf) {rndis_resp_t *r, *n; +spin_lock (¶ms->resp_lock);list_for_each_entry_safe (r, n, ¶ms->resp_queue, list) {if (r->buf == buf) {list_del (&r->list);kfree (r); } } +spin_unlock (¶ms->resp_lock); }EXPORT_SYMBOL_GPL (rndis_free_response);
@@ -1030,14 +1033,17 @@ u8 *rndis_get_next_response(struct rndis_params *params, u32 *length)if (!length)return NULL ; +spin_lock (¶ms->resp_lock);list_for_each_entry_safe (r, n, ¶ms->resp_queue, list) {if (!r->send) { r->send =1 ; *length = r->length; +spin_unlock (¶ms->resp_lock);return r->buf; } } +spin_unlock (¶ms->resp_lock);return NULL ; }EXPORT_SYMBOL_GPL (rndis_get_next_response);
@@ -1054,7 +1060,9 @@ static rndis_resp_t *rndis_add_response(struct rndis_params *params, u32 length) r->length = length; r->send =0 ; +spin_lock (¶ms->resp_lock);list_add_tail (&r->list, ¶ms->resp_queue); +spin_unlock (¶ms->resp_lock);return r; }
drivers/usb/gadget/function/rndis.h +1 -0
@@ -174,6 +174,7 @@ typedef struct rndis_params {void (*resp_avail)(void *v);void *v;struct list_head resp_queue; +spinlock_t resp_lock; } rndis_params;/* RNDIS Message parser and other useless functions */
drivers/usb/gadget/udc/udc-xilinx.c +6 -0
@@ -1613,6 +1613,8 @@ static void xudc_getstatus(struct xusb_udc *udc)break ;case USB_RECIP_ENDPOINT : epnum = udc->setup.wIndex &USB_ENDPOINT_NUMBER_MASK ; +if (epnum >=XUSB_MAX_ENDPOINTS ) + goto stall; target_ep = &udc->ep[epnum]; epcfgreg = udc->read_fn (udc->addr + target_ep->offset); halt = epcfgreg &XUSB_EP_CFG_STALL_MASK ;
@@ -1680,6 +1682,10 @@ static void xudc_set_clear_feature(struct xusb_udc *udc)case USB_RECIP_ENDPOINT :if (!udc->setup.wValue) { endpoint = udc->setup.wIndex &USB_ENDPOINT_NUMBER_MASK ; +if (endpoint >=XUSB_MAX_ENDPOINTS ) { +xudc_ep0_stall (udc); +return ; + } target_ep = &udc->ep[endpoint]; outinbit = udc->setup.wIndex &USB_ENDPOINT_DIR_MASK ; outinbit = outinbit >>7 ;
drivers/usb/host/xhci.c +19 -9
@@ -1091,6 +1091,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)int retval =0 ;bool comp_timer_running = false;bool pending_portevent = false; +bool reinit_xhc = false;if (!hcd->state)return 0 ;
@@ -1107,10 +1108,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)set_bit (HCD_FLAG_HW_ACCESSIBLE , &xhci->shared_hcd->flags);spin_lock_irq (&xhci->lock); -if ((xhci->quirks &XHCI_RESET_ON_RESUME ) || xhci->broken_suspend) - hibernated = true; -if (!hibernated) { +if (hibernated || xhci->quirks &XHCI_RESET_ON_RESUME || xhci->broken_suspend) + reinit_xhc = true; + +if (!reinit_xhc) {/* * Some controllers might lose power during suspend, so wait * for controller not ready bit to clear, just as in xHC init.
@@ -1143,12 +1145,17 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)spin_unlock_irq (&xhci->lock);return -ETIMEDOUT ; } - temp =readl (&xhci->op_regs->status); } -/* If restore operation fails, re-initialize the HC during resume */ -if ((temp &STS_SRE ) || hibernated) { + temp =readl (&xhci->op_regs->status); +/* re-initialize the HC on Restore Error, or Host Controller Error */ +if (temp & (STS_SRE |STS_HCE )) { + reinit_xhc = true; +xhci_warn (xhci,"xHC error in resume, USBSTS 0x%x, Reinit\n" , temp); + } + +if (reinit_xhc) {if ((xhci->quirks &XHCI_COMP_MODE_QUIRK ) && !(xhci_all_ports_seen_u0 (xhci))) {del_timer_sync (&xhci->comp_mode_recovery_timer);
@@ -1480,9 +1487,12 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flagstruct urb_priv *urb_priv;int num_tds; -if (!urb ||xhci_check_args (hcd, urb->dev, urb->ep, - true, true, __func__) <=0 ) +if (!urb)return -EINVAL ; + ret =xhci_check_args (hcd, urb->dev, urb->ep, + true, true, __func__); +if (ret <=0 ) +return ret ? ret : -EINVAL ; slot_id = urb->dev->slot_id; ep_index =xhci_get_endpoint_index (&urb->ep->desc);
@@ -3282,7 +3292,7 @@ static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,return -EINVAL ; ret =xhci_check_args (xhci_to_hcd (xhci), udev, ep,1 , true, __func__);if (ret <=0 ) -return -EINVAL ; +return ret ? ret : -EINVAL ;if (usb_ss_max_streams (&ep->ss_ep_comp) ==0 ) { xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion" " descriptor for ep 0x%x does not support streams\n",
drivers/usb/serial/ch341.c +0 -1
@@ -80,7 +80,6 @@#define CH341_LCR_CS5 0x00static const struct usb_device_id id_table[] = { - {USB_DEVICE (0x1a86 ,0x5512 ) }, {USB_DEVICE (0x1a86 ,0x5523 ) }, {USB_DEVICE (0x1a86 ,0x7522 ) }, {USB_DEVICE (0x1a86 ,0x7523 ) },
drivers/usb/serial/option.c +12 -0
@@ -198,6 +198,8 @@ static void option_instat_callback(struct urb *urb);#define DELL_PRODUCT_5821E 0x81d7#define DELL_PRODUCT_5821E_ESIM 0x81e0 +#define DELL_PRODUCT_5829E_ESIM 0x81e4 +#define DELL_PRODUCT_5829E 0x81e6#define KYOCERA_VENDOR_ID 0x0c88#define KYOCERA_PRODUCT_KPC650 0x17da
@@ -1063,6 +1065,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM), .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E), + .driver_info = RSVD(0) | RSVD(6) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM), + .driver_info = RSVD(0) | RSVD(6) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1273,10 +1279,16 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */ .driver_info = NCTRL(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701a, 0xff), /* Telit LE910R1 (RNDIS) */ + .driver_info = NCTRL(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff), /* Telit LE910R1 (ECM) */ + .driver_info = NCTRL(2) }, { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */ .driver_info = NCTRL(0) | ZLP }, { USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */ .driver_info = NCTRL(0) | ZLP }, + { USB_DEVICE(TELIT_VENDOR_ID, 0x9201), /* Telit LE910R1 flashing device */ + .driver_info = NCTRL(0) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = RSVD(1) },
drivers/vhost/vsock.c +14 -7
@@ -570,16 +570,18 @@ static int vhost_vsock_start(struct vhost_vsock *vsock)return ret; } -static int vhost_vsock_stop (struct vhost_vsock *vsock) +static int vhost_vsock_stop (struct vhost_vsock *vsock,bool check_owner) {size_t i; -int ret; +int ret =0 ;mutex_lock (&vsock->dev.mutex); - ret =vhost_dev_check_owner (&vsock->dev); -if (ret) - goto err; +if (check_owner) { + ret =vhost_dev_check_owner (&vsock->dev); +if (ret) + goto err; + }for (i =0 ; i <ARRAY_SIZE (vsock->vqs); i++) {struct vhost_virtqueue *vq = &vsock->vqs[i];
@@ -694,7 +696,12 @@ static int vhost_vsock_dev_release(struct inode *inode, struct file *file)* inefficient. Room for improvement here. */ vsock_for_each_connected_socket (vhost_vsock_reset_orphans); -vhost_vsock_stop (vsock); +/* Don't check the owner, because we are in the release path, so we +* need to stop the vsock device in any case. +* vhost_vsock_stop() can not fail in this case, so we don't need to +* check the return code. +*/ +vhost_vsock_stop (vsock, false);vhost_vsock_flush (vsock);vhost_dev_stop (&vsock->dev);
@@ -792,7 +799,7 @@ static long vhost_vsock_dev_ioctl(struct file *f, unsigned int ioctl,if (start)return vhost_vsock_start (vsock);else -return vhost_vsock_stop (vsock); +return vhost_vsock_stop (vsock, true);case VHOST_GET_FEATURES : features =VHOST_VSOCK_FEATURES ;if (copy_to_user (argp, &features,sizeof (features)))
fs/configfs/dir.c +14 -0
@@ -36,6 +36,14 @@*/ DEFINE_SPINLOCK (configfs_dirent_lock); +/* +* All of link_obj/unlink_obj/link_group/unlink_group require that +* subsys->su_mutex is held. +* But parent configfs_subsystem is NULL when config_item is root. +* Use this mutex when config_item is root. +*/ +static DEFINE_MUTEX (configfs_subsystem_mutex); +static void configfs_d_iput (struct dentry * dentry,struct inode * inode) {
@@ -1884,7 +1892,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys) group->cg_item.ci_name = group->cg_item.ci_namebuf; sd = root->d_fsdata; +mutex_lock (&configfs_subsystem_mutex);link_group (to_config_group (sd->s_element), group); +mutex_unlock (&configfs_subsystem_mutex);inode_lock_nested (d_inode (root),I_MUTEX_PARENT );
@@ -1909,7 +1919,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)inode_unlock (d_inode (root));if (err) { +mutex_lock (&configfs_subsystem_mutex);unlink_group (group); +mutex_unlock (&configfs_subsystem_mutex);configfs_release_fs (); }put_fragment (frag);
@@ -1956,7 +1968,9 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys)dput (dentry); +mutex_lock (&configfs_subsystem_mutex);unlink_group (group); +mutex_unlock (&configfs_subsystem_mutex);configfs_release_fs (); }
fs/file.c +57 -16
85 lines not on this page · raw message
fs/tracefs/inode.c +3 -2
@@ -262,7 +262,6 @@ static int tracefs_parse_options(char *data, struct tracefs_mount_opts *opts)if (!gid_valid (gid))return -EINVAL ; opts->gid = gid; -set_gid (tracefs_mount->mnt_root, gid);break ;case Opt_mode:if (match_octal (&args[0 ], &option))
@@ -289,7 +288,9 @@ static int tracefs_apply_options(struct super_block *sb) inode->i_mode |= opts->mode; inode->i_uid = opts->uid; - inode->i_gid = opts->gid; + +/* Set all the group ids to the mount option */ +set_gid (sb->s_root, opts->gid);return 0 ; }
include/linux/tee_drv.h +14 -0
@@ -579,4 +579,18 @@ struct tee_client_driver {#define to_tee_client_driver (d) \ container_of(d, struct tee_client_driver, driver) +/** +* teedev_open() - Open a struct tee_device +* @teedev: Device to open +* +* @return a pointer to struct tee_context on success or an ERR_PTR on failure. +*/ +struct tee_context *teedev_open (struct tee_device *teedev); + +/** +* teedev_close_context() - closes a struct tee_context +* @ctx: The struct tee_context to close +*/ +void teedev_close_context (struct tee_context *ctx); +#endif /*__TEE_DRV_H*/
include/net/checksum.h +26 -20
141 lines not on this page · raw message
include/net/netfilter/nf_tables.h +1 -1
@@ -805,7 +805,7 @@ struct nft_expr_ops {int (*offload)(struct nft_offload_ctx *ctx,struct nft_flow_rule *flow,const struct nft_expr *expr); -u32 offload_flags; +bool (*offload_action)(const struct nft_expr *expr);const struct nft_expr_type *type;void *data; };
include/net/netfilter/nf_tables_offload.h +0 -2
@@ -60,8 +60,6 @@ struct nft_flow_rule {struct flow_rule *rule; }; -#define NFT_OFFLOAD_F_ACTION (1 << 0) -void nft_flow_rule_set_addr_type (struct nft_flow_rule *flow,enum flow_dissector_key_id addr_type);
kernel/cgroup/cpuset.c +2 -0
@@ -2204,6 +2204,7 @@ static void cpuset_attach(struct cgroup_taskset *tset)cgroup_taskset_first (tset, &css); cs =css_cs (css); +cpus_read_lock ();percpu_down_write (&cpuset_rwsem);/* prepare for attach */
@@ -2259,6 +2260,7 @@ static void cpuset_attach(struct cgroup_taskset *tset)wake_up (&cpuset_attach_wq);percpu_up_write (&cpuset_rwsem); +cpus_read_unlock (); }/* The various types of files and directories in a cpuset file system */
kernel/trace/trace_events_trigger.c +46 -6
88 lines not on this page · raw message
mm/memblock.c +8 -2
@@ -348,14 +348,20 @@ void __init memblock_discard(void) addr =__pa (memblock.reserved.regions); size =PAGE_ALIGN (sizeof (struct memblock_region ) * memblock.reserved.max); - __memblock_free_late(addr, size); +if (memblock_reserved_in_slab) +kfree (memblock.reserved.regions); +else + __memblock_free_late(addr, size); }if (memblock.memory.regions != memblock_memory_init_regions) { addr =__pa (memblock.memory.regions); size =PAGE_ALIGN (sizeof (struct memblock_region ) * memblock.memory.max); -__memblock_free_late (addr, size); +if (memblock_memory_in_slab) +kfree (memblock.memory.regions); +else +__memblock_free_late (addr, size); } }#endif
net/core/filter.c +3 -0
@@ -2516,6 +2516,9 @@ BPF_CALL_4(bpf_msg_pop_data, struct sk_msg *, msg, u32, start,if (unlikely (flags))return -EINVAL ; +if (unlikely (len ==0 )) +return 0 ; +/* First find the starting scatterlist element */ i = msg->sg.start; do {
net/core/skbuff.c +2 -2
@@ -2139,7 +2139,7 @@ void *__pskb_pull_tail(struct sk_buff *skb, int delta)/* Free pulled out fragments. */ while ((list =skb_shinfo (skb)->frag_list) != insp) {skb_shinfo (skb)->frag_list = list->next; -kfree_skb (list); +consume_skb (list); }/* And insert new clone at head. */ if (clone) {
@@ -5846,7 +5846,7 @@ static int pskb_carve_frag_list(struct sk_buff *skb,/* Free pulled out fragments. */ while ((list = shinfo->frag_list) != insp) { shinfo->frag_list = list->next; -kfree_skb (list); +consume_skb (list); }/* And insert new clone at head. */ if (clone) {
net/ipv4/af_inet.c +4 -1
@@ -1344,8 +1344,11 @@ struct sk_buff *inet_gso_segment(struct sk_buff *skb, } ops =rcu_dereference (inet_offloads[proto]); -if (likely (ops && ops->callbacks.gso_segment)) +if (likely (ops && ops->callbacks.gso_segment)) { segs = ops->callbacks.gso_segment (skb, features); +if (!segs) + skb->network_header =skb_mac_header (skb) + nhoff - skb->head; + }if (IS_ERR_OR_NULL (segs)) goto out;
net/ipv4/ping.c +0 -1
@@ -187,7 +187,6 @@ static struct sock *ping_lookup(struct net *net, struct sk_buff *skb, u16 ident) (int)ident, &ipv6_hdr(skb)->daddr, dif);#endif }else { -pr_err ("ping: protocol(%x) is not supported\n" ,ntohs (skb->protocol));return NULL ; }
net/ipv6/ip6_offload.c +2 -0
@@ -111,6 +111,8 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb,if (likely (ops && ops->callbacks.gso_segment)) {skb_reset_transport_header (skb); segs = ops->callbacks.gso_segment (skb, features); +if (!segs) + skb->network_header =skb_mac_header (skb) + nhoff - skb->head; }if (IS_ERR_OR_NULL (segs))
net/netfilter/nf_tables_api.c +9 -4
@@ -5184,12 +5184,15 @@ static int nf_tables_updobj(const struct nft_ctx *ctx, {struct nft_object *newobj;struct nft_trans *trans; -int err; +int err = -ENOMEM ; + +if (!try_module_get (type->owner)) +return -ENOENT ; trans =nft_trans_alloc (ctx,NFT_MSG_NEWOBJ ,sizeof (struct nft_trans_obj ));if (!trans) -return -ENOMEM ; + goto err_trans; newobj =nft_obj_init (ctx, type, attr);if (IS_ERR (newobj)) {
@@ -5206,6 +5209,8 @@ static int nf_tables_updobj(const struct nft_ctx *ctx, err_free_trans:kfree (trans); +err_trans: +module_put (type->owner);return err; }
@@ -6544,7 +6549,7 @@ static void nft_obj_commit_update(struct nft_trans *trans)if (obj->ops->update) obj->ops->update (obj, newobj); -kfree (newobj); +nft_obj_destroy (&trans->ctx, newobj); }static void nft_commit_release (struct nft_trans *trans)
@@ -7109,7 +7114,7 @@ static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action)break ;case NFT_MSG_NEWOBJ :if (nft_trans_obj_update (trans)) { -kfree (nft_trans_obj_newobj (trans)); +nft_obj_destroy (&trans->ctx,nft_trans_obj_newobj (trans));nft_trans_destroy (trans); }else { trans->ctx.table->use--;
net/netfilter/nf_tables_offload.c +2 -1
@@ -55,7 +55,8 @@ struct nft_flow_rule *nft_flow_rule_create(struct net *net, expr =nft_expr_first (rule);while (nft_expr_more (rule, expr)) { -if (expr->ops->offload_flags &NFT_OFFLOAD_F_ACTION ) +if (expr->ops->offload_action && + expr->ops->offload_action (expr)) num_actions++; expr =nft_expr_next (expr);
net/netfilter/nft_dup_netdev.c +6 -0
@@ -67,6 +67,11 @@ static int nft_dup_netdev_offload(struct nft_offload_ctx *ctx,return nft_fwd_dup_netdev_offload (ctx, flow,FLOW_ACTION_MIRRED , oif); } +static bool nft_dup_netdev_offload_action (const struct nft_expr *expr) +{ +return true; +} +static struct nft_expr_type nft_dup_netdev_type;static const struct nft_expr_ops nft_dup_netdev_ops = { .type = &nft_dup_netdev_type,
@@ -75,6 +80,7 @@ static const struct nft_expr_ops nft_dup_netdev_ops = { .init = nft_dup_netdev_init, .dump = nft_dup_netdev_dump, .offload = nft_dup_netdev_offload, + .offload_action = nft_dup_netdev_offload_action, };static struct nft_expr_type nft_dup_netdev_type__read_mostly = {
net/netfilter/nft_fwd_netdev.c +6 -0
@@ -77,6 +77,11 @@ static int nft_fwd_netdev_offload(struct nft_offload_ctx *ctx,return nft_fwd_dup_netdev_offload (ctx, flow,FLOW_ACTION_REDIRECT , oif); } +static bool nft_fwd_netdev_offload_action (const struct nft_expr *expr) +{ +return true; +} +struct nft_fwd_neigh {enum nft_registers sreg_dev:8 ;enum nft_registers sreg_addr:8 ;
@@ -219,6 +224,7 @@ static const struct nft_expr_ops nft_fwd_netdev_ops = { .dump = nft_fwd_netdev_dump, .validate = nft_fwd_validate, .offload = nft_fwd_netdev_offload, + .offload_action = nft_fwd_netdev_offload_action, }; static const struct nft_expr_ops *
net/netfilter/nft_immediate.c +11 -1
@@ -163,6 +163,16 @@ static int nft_immediate_offload(struct nft_offload_ctx *ctx,return 0 ; } +static bool nft_immediate_offload_action (const struct nft_expr *expr) +{ +const struct nft_immediate_expr *priv =nft_expr_priv (expr); + +if (priv->dreg ==NFT_REG_VERDICT ) +return true; + +return false; +} +static const struct nft_expr_ops nft_imm_ops = { .type = &nft_imm_type, .size =NFT_EXPR_SIZE (sizeof (struct nft_immediate_expr )),
@@ -173,7 +183,7 @@ static const struct nft_expr_ops nft_imm_ops = { .dump = nft_immediate_dump, .validate = nft_immediate_validate, .offload = nft_immediate_offload, - .offload_flags = NFT_OFFLOAD_F_ACTION, + .offload_action = nft_immediate_offload_action, };struct nft_expr_type nft_imm_type__read_mostly = {
net/openvswitch/actions.c +38 -8
68 lines not on this page · raw message
net/tipc/name_table.c +1 -1
@@ -812,7 +812,7 @@ static int __tipc_nl_add_nametable_publ(struct tipc_nl_msg *msg,list_for_each_entry (p, &sr->all_publ, all_publ)if (p->key == *last_key)break ; -if (p->key != *last_key) +if (list_entry_is_head (p, &sr->all_publ, all_publ))return -EPIPE ; }else { p = list_first_entry(&sr->all_publ,
net/tipc/socket.c +1 -1
@@ -3590,7 +3590,7 @@ static int __tipc_nl_list_sk_publ(struct sk_buff *skb,if (p->key == *last_publ)break ; } -if (p->key != *last_publ) { +if (list_entry_is_head (p, &tsk->publications, binding_sock)) {/* We never set seq or call nl_dump_check_consistent() * this means that setting prev_seq here will cause the * consistence check to fail in the netlink callback
tools/perf/util/data.c +3 -4
@@ -44,10 +44,6 @@ int perf_data__create_dir(struct perf_data *data, int nr)if (!files)return -ENOMEM ; - data->dir.version =PERF_DIR_VERSION ; - data->dir.files = files; - data->dir.nr = nr; -for (i =0 ; i < nr; i++) {struct perf_data_file *file = &files[i];
@@ -62,6 +58,9 @@ int perf_data__create_dir(struct perf_data *data, int nr) file->fd = ret; } + data->dir.version =PERF_DIR_VERSION ; + data->dir.files = files; + data->dir.nr = nr;return 0 ; out_err: