arm: multi_v5: enable configs for versatile
PATCH 1/1 arm: multi_v5: enable configs for versatile
Make it possible to boot a versatile machine in qemu.
Boot command:
/usr/bin/qemu-system-arm -cpu arm926 -machine versatilepb \
-nographic -nic none -m 256M -monitor none -no-reboot \
-kernel zImage -dtb versatile-pb.dtb \
-append "console=ttyAMA0,115200 rootwait root=/dev/vda" \
-drive armv5_rootfs.ext4,if=none,format=raw,id=hd0 \
-device virtio-blk-pci,drive=hd0
When doing build and boot testing, it makes more sense to enable arch vesatile, serial amba_pl011 and virtio (mmio|blk|pci) to multi_v5_defconfig to make that boot out of the box, with a modern virtio (mmio|blk|pci) driver. Using the above commandline. Another way to build and boot would be to use tuxmake/tuxrun. Tuxmake [1] builds the kernel, and Tuxrun [2] boots the kernel in qemu. Both projects uses podman to do the build/tests inside. This makes both project a good tool to use when finding a regression that you would like someone else to reproduce with the exact same setup.
tuxmake --runtime podman --target-arch arm \
--toolchain gcc-11 --kconfig multi_v5_defconfigtuxrun --tuxmake ~/.cache/tuxmake/builds/3072 --device qemu-armv5
[1] https://tuxmake.org/
[2] https://tuxrun.org/
--- arch/arm/configs/multi_v5_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/configs/multi_v5_defconfig +7 -0
@@ -85,6 +85,8 @@ CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_PCI_MVEBU=y +CONFIG_ARCH_VERSATILE=y +CONFIG_PCI_VERSATILE=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_IMX_WEIM=y
@@ -111,6 +113,9 @@ CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BLK=y CONFIG_CHR_DEV_SG=m CONFIG_ATA=y CONFIG_SATA_AHCI=y
@@ -144,6 +149,8 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_ASPEED_VUART=m CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_ATMEL_TTYAT=y
Signature · 1 line
2.34.1
This patch was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:
Hello:
This patch was applied to soc/soc.git (for-next)
by Arnd Bergmann <[email protected]>:
Quoted 11 lines · On Tue, 8 Mar 2022 13:19:33 +0100 you wrote:
Make it possible to boot a versatile machine in qemu.
Boot command:
/usr/bin/qemu-system-arm-cpu arm926 -machine versatilepb \
-nographic -nic none -m 256M -monitor none -no-reboot \
-kernel zImage -dtb versatile-pb.dtb \
-append "console=ttyAMA0,115200 rootwait root=/dev/vda" \
-drive armv5_rootfs.ext4,if=none,format=raw,id=hd0 \
-device virtio-blk-pci,drive=hd0[...]
Here is the summary with links:
- arm: multi_v5: enable configs for versatile
https://git.kernel.org/soc/soc/c/42cc353b54fd
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html