Bluetooth: btrtl: Add support for RTL8852B
PATCH 1/1 Bluetooth: btrtl: Add support for RTL8852B
From: Max Chou <[email protected]>
Add the support for RTL8852B BT controller on USB interface. The necessary firmware file will be submitted to linux-firmware.
--- drivers/bluetooth/btrtl.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/bluetooth/btrtl.c +13 -0
@@ -49,6 +49,7 @@ enum btrtl_chip_id {CHIP_ID_8822C =13 ,CHIP_ID_8761B ,CHIP_ID_8852A =18 , + CHIP_ID_8852B = 20, }; struct id_table {
@@ -187,6 +188,14 @@ static const struct id_table ic_id_table[] = { .has_msft_ext = true, .fw_name = "rtl_bt/rtl8852au_fw.bin", .cfg_name = "rtl_bt/rtl8852au_config" }, + +/* 8852B */ + { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_USB), + .config_needed = false, + .has_rom_version = true, + .has_msft_ext = true, + .fw_name = "rtl_bt/rtl8852bu_fw.bin", + .cfg_name = "rtl_bt/rtl8852bu_config" }, }; static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
@@ -295,6 +304,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, { RTL_ROM_LMP_8822B, 13 }, /* 8822C */ { RTL_ROM_LMP_8761A, 14 }, /* 8761B */ { RTL_ROM_LMP_8852A, 18 }, /* 8852A */ + { RTL_ROM_LMP_8852A, 20 }, /* 8852B */ }; min_size =sizeof (struct rtl_epatch_header ) +sizeof (extension_sig) +3 ;
@@ -757,6 +767,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)switch (btrtl_dev->project_id) {case CHIP_ID_8822C :case CHIP_ID_8852A : +case CHIP_ID_8852B :set_bit (HCI_QUIRK_VALID_LE_STATES , &hdev->quirks);set_bit (HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED , &hdev->quirks);hci_set_aosp_capable (hdev);
@@ -934,3 +945,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin");MODULE_FIRMWARE ("rtl_bt/rtl8822b_config.bin" );MODULE_FIRMWARE ("rtl_bt/rtl8852au_fw.bin" );MODULE_FIRMWARE ("rtl_bt/rtl8852au_config.bin" ); +MODULE_FIRMWARE ("rtl_bt/rtl8852bu_fw.bin" ); +MODULE_FIRMWARE ("rtl_bt/rtl8852bu_config.bin" );
Signature · 1 line
2.17.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=623044
---Test result---
Test Summary:
CheckPatch PASS 1.69 seconds GitLint PASS 1.01 seconds SubjectPrefix PASS 0.91 seconds BuildKernel PASS 34.58 seconds BuildKernel32 PASS 29.48 seconds Incremental Build with patchesPASS 42.12 seconds TestRunner: Setup PASS 527.74 seconds TestRunner: l2cap-tester PASS 16.67 seconds TestRunner: bnep-tester PASS 6.50 seconds TestRunner: mgmt-tester PASS 110.60 seconds TestRunner: rfcomm-tester PASS 8.55 seconds TestRunner: sco-tester PASS 8.33 seconds TestRunner: smp-tester PASS 8.36 seconds TestRunner: userchan-tester PASS 6.95 seconds
---
Regards,
Linux Bluetooth
Marcel Holtmann
maintainerHi Max,
Quoted 7 lines
Add the support for RTL8852B BT controller on USB interface. The necessary firmware file will be submitted to linux-firmware.
Signed-off-by Max Chou <[email protected]>---
drivers/bluetooth/btrtl.c| 13 +++++++++++++1 file changed, 13 insertions(+)
the patch has been applied to bluetooth-next tree.
Regards
Marcel
This patch was applied to bluetooth/bluetooth-next.git (master) by Marcel Holtmann <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Marcel Holtmann <[email protected]>:
Quoted 8 lines · On Mon, 14 Mar 2022 14:54:22 +0800 you wrote:
From: Max Chou <[email protected]>
Add the support for RTL8852B BT controller on USB interface. The necessary firmware file will be submitted to linux-firmware.
Signed-off-by Max Chou <[email protected]>[...]
Here is the summary with links:
- Bluetooth: btrtl: Add support for RTL8852B
https://git.kernel.org/bluetooth/bluetooth-next/c/263a90f4f1a6
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html