Skip to contentSkip to conversation

AP152 & TP-Link Archer C7

DISCUSSION Brice GIBOUDEAU 1 participant 1 message Mar 16, 2022 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

?Hello,

As I need to modify the boot environment I need to upgrade the fairly old Uboot-1.1.4 that you find on those quite popular device TP-Link Archer C7 (version 5 in my case).

After investigations I found that you have a support for the AP152 that is the base of that router. I just changed few things to enable the proper boot address and Ethernet support.

U-Boot work well but twhen OpenWRT boot it crash with random characters on the console during the PIEe initialization.

Did I missed something ? (a variabe to set somewhere ?) I added debug info below.

Regards,
MiNuS_89

?--------

Below the last line of the boot log from the console that show the issue.

[    1.770010] 8021q: 802.1Q VLAN Support v1.8
[    1.775142] PCI host bridge /ahb/pcie-controller@18250000 ranges:
[    1.781508]  MEM 0x0000000012000000..0x0000000013ffffff
[    1.786923]   IO 0x0000000000000000..0x0000000000000000
[[    1.998826] rr724x-pci11825000..pcie-cnntrolee:: PCIe iink is oonn
                                                                         244244  P  htt iiggeoo ss 0::0

[[ .86557]ci_s 00:0: N bsnesurc fun fo rt us wl uee[b 00ff [ 2.884066pccbus 0000::rt s ssor [[mm 12000000x11fffff
[[ .8874] ctoys uabl toopen tc evic (rt0) 28758] pi_s 00:0 bsn_re [bs 0-f] d s pdtedto00

---------

My U-Boot version: U-Boot 2022.04-rc4 (Mar 15 2022 - 16:56:25 +0100)

---------

I cross compiled it with the OpenWRT SDK: openwrt-sdk-21.02.2-ath79-generic_gcc-8.4.0_musl.Linux-x86_64

--------

I'm booting OpenWRT 21.02.2 and it boot correctly with the original U-Boot that I recovered a couple of time to investigate.