Skip to contentSkip to conversation

selftests: test_vxlan_under_vrf: Fix broken test case

PATCH Applied Ido Schimmel 3 participants 3 messages Mar 24, 2022 – Mar 26, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 selftests: test_vxlan_under_vrf: Fix broken test case

The purpose of the last test case is to test VXLAN encapsulation and decapsulation when the underlay lookup takes place in a non-default VRF. This is achieved by enslaving the physical device of the tunnel to a VRF.

The binding of the VXLAN UDP socket to the VRF happens when the VXLAN device itself is opened, not when its physical device is opened. This was also mentioned in the cited commit ("tests that moving the underlay from a VRF to another works when down/up the VXLAN interface"), but the test did something else.

Fix it by reopening the VXLAN device instead of its physical device.

Before:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [FAIL]

After:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [ OK ]
Fixes 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF")
---
 tools/testing/selftests/net/test_vxlan_under_vrf.sh | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tools/testing/selftests/net/test_vxlan_under_vrf.sh +4 -4
index ea5a7a808f12..1fd1250ebc66 100755
@@ -120,11 +120,11 @@ echo "[ OK ]"
 
 # Move the underlay to a non-default VRF
 ip -netns hv-1 link set veth0 vrf vrf-underlay
-ip -netns hv-1 link set veth0 down
-ip -netns hv-1 link set veth0 up
+ip -netns hv-1 link set vxlan0 down
+ip -netns hv-1 link set vxlan0 up
 ip -netns hv-2 link set veth0 vrf vrf-underlay
-ip -netns hv-2 link set veth0 down
-ip -netns hv-2 link set veth0 up
+ip -netns hv-2 link set vxlan0 down
+ip -netns hv-2 link set vxlan0 up
 
 echo -n "Check VM connectivity through VXLAN (underlay in a VRF)            "
 ip netns exec vm-1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false)
Signature · 1 line
2.33.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 27 lines · Ido Schimmel

The purpose of the last test case is to test VXLAN encapsulation and decapsulation when the underlay lookup takes place in a non-default VRF. This is achieved by enslaving the physical device of the tunnel to a VRF.

The binding of the VXLAN UDP socket to the VRF happens when the VXLAN device itself is opened, not when its physical device is opened. This was also mentioned in the cited commit ("tests that moving the underlay from a VRF to another works when down/up the VXLAN interface"), but the test did something else.

Fix it by reopening the VXLAN device instead of its physical device.

Before:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [FAIL]

After:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [ OK ]
Quoted 6 lines
Fixes 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF")
---
 tools/testing/selftests/net/test_vxlan_under_vrf.sh | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
#2 lore raw
In reply to Ido Schimmel
This patch was applied to netdev/net.git (master) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net.git (master)
by Jakub Kicinski <[email protected]>:

Quoted 5 lines · On Thu, 24 Mar 2022 22:05:14 +0200 you wrote:

The purpose of the last test case is to test VXLAN encapsulation and decapsulation when the underlay lookup takes place in a non-default VRF. This is achieved by enslaving the physical device of the tunnel to a VRF.

Quoted 7 lines

The binding of the VXLAN UDP socket to the VRF happens when the VXLAN device itself is opened, not when its physical device is opened. This was also mentioned in the cited commit ("tests that moving the underlay from a VRF to another works when down/up the VXLAN interface"), but the test did something else.

[...]

Here is the summary with links:
- [net] selftests: test_vxlan_under_vrf: Fix broken test case

    https://git.kernel.org/netdev/net/c/b50d3b46f842

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html