FAILED: patch "[PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage" failed to apply to 5.15-stable tree

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 571426631acf46e2999c7ecd1e9d048172969a43 Mon Sep 17 00:00:00 2001
From: Billy Tsai <[email protected]>
Date: Mon, 21 Feb 2022 09:27:05 +0800
Subject: [PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage
reading.

The formula for the ADC sampling period in ast2400/ast2500 is:
ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0]) When ADC0C[9:0] is set to 0 the sampling voltage will be lower than expected, because the hardware may not have enough time to charge/discharge to a stable voltage. This patch use the flag CLK_DIVIDER_ONE_BASED which will use the raw value read from the register, with the value of zero considered invalid to conform to the corrected formula.

index e939b84cbb56..0793d2474cdc 100644
@@ -539,7 +539,9 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	data->clk_scaler = devm_clk_hw_register_divider(
 		&pdev->dev, clk_name, clk_parent_name, scaler_flags,
 		data->base + ASPEED_REG_CLOCK_CONTROL, 0,
-		data->model_data->scaler_bit_width, 0, &data->clk_lock);
+		data->model_data->scaler_bit_width,
+		data->model_data->need_prescaler ? CLK_DIVIDER_ONE_BASED : 0,
+		&data->clk_lock);
 	if (IS_ERR(data->clk_scaler))
 		return PTR_ERR(data->clk_scaler);