pinctrl: Fix an error in pin-function table of SP7021
Subsystems (3)
Wells Lu
maintainerPATCH 1/1 pinctrl: Fix an error in pin-function table of SP7021
The first valid item of pin-function table should start from the third item. The first two items, due to historical and compatible reasons, should be dummy items.
The two dummy items were removed accidentally in initial submission. This fix adds them back.
Signed-off-by Wells Lu <[email protected]>
--- drivers/pinctrl/sunplus/sppctl_sp7021.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/pinctrl/sunplus/sppctl_sp7021.c +8 -0
@@ -419,7 +419,15 @@ static const struct sppctl_grp sp7021grps_prbp[] = { EGRP("PROBE_PORT2", 2, pins_prp2), }; +/* +* Due to compatible reason, the first valid item should start at the third +* position of the array. Please keep the first two items of the table +* no use (dummy). +*/ const struct sppctl_func sppctl_list_funcs[] = { +FNCN ("" , pinmux_type_fpmx,0x00 ,0 ,0 ), +FNCN ("" , pinmux_type_fpmx,0x00 ,0 ,0 ), +FNCN ("L2SW_CLK_OUT" , pinmux_type_fpmx,0x00 ,0 ,7 ),FNCN ("L2SW_MAC_SMI_MDC" , pinmux_type_fpmx,0x00 ,8 ,7 ),FNCN ("L2SW_LED_FLASH0" , pinmux_type_fpmx,0x01 ,0 ,7 ),
Signature · 1 line
2.7.4
Quoted 9 lines · Wells Lu
The first valid item of pin-function table should start from the third item. The first two items, due to historical and compatible reasons, should be dummy items.
The two dummy items were removed accidentally in initial submission. This fix adds them back.
Signed-off-by Wells Lu <[email protected]>
Patch applied for fixes!
Yours,
Linus Walleij