selftests: mlxsw: Make VXLAN flooding tests more robust
Subsystems (4)
Ido Schimmel
maintainercover selftests: mlxsw: Make VXLAN flooding tests more robust
Make the VXLAN flooding tests (with IPv4 and IPv6 underlay) more robust by preventing flooding of unwanted packets. See detailed description of the problem and solution in the commit messages.
Ido Schimmel (2):
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted
packets
.../net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh | 17 +++++++++++++++++ .../drivers/net/mlxsw/vxlan_flooding.sh | 17 +++++++++++++++++ 2 files changed, 34 insertions(+)
Signature · 1 line
2.33.1
Ido Schimmel
maintainerPATCH 1/2 selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count.
Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw.
--- .../drivers/net/mlxsw/vxlan_flooding.sh | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh +17 -0
@@ -172,6 +172,17 @@ flooding_filters_add() local lsb local i + # Prevent unwanted packets from entering the bridge and interfering + # with the test. + tc qdisc add dev br0 clsact + tc filter add dev br0 egress protocol all pref 1 handle 1 \ + matchall skip_hw action drop + tc qdisc add dev $h1 clsact + tc filter add dev $h1 egress protocol all pref 1 handle 1 \ + flower skip_hw dst_mac de:ad:be:ef:13:37 action pass + tc filter add dev $h1 egress protocol all pref 2 handle 2 \ + matchall skip_hw action drop + tc qdisc add dev $rp2 clsact for i in $(eval echo {1..$num_remotes}); do
@@ -194,6 +205,12 @@ flooding_filters_del() done tc qdisc del dev $rp2 clsact + + tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall + tc filter del dev $h1 egress protocol all pref 1 handle 1 flower + tc qdisc del dev $h1 clsact + tc filter del dev br0 egress protocol all pref 1 handle 1 matchall + tc qdisc del dev br0 clsact } flooding_check_packets()
Signature · 1 line
2.33.1
Ido Schimmel
maintainerPATCH 2/2 selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
In reply to Ido SchimmelThe test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count.
Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw.
--- .../net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh +17 -0
@@ -159,6 +159,17 @@ flooding_remotes_add() local lsb local i + # Prevent unwanted packets from entering the bridge and interfering + # with the test. + tc qdisc add dev br0 clsact + tc filter add dev br0 egress protocol all pref 1 handle 1 \ + matchall skip_hw action drop + tc qdisc add dev $h1 clsact + tc filter add dev $h1 egress protocol all pref 1 handle 1 \ + flower skip_hw dst_mac de:ad:be:ef:13:37 action pass + tc filter add dev $h1 egress protocol all pref 2 handle 2 \ + matchall skip_hw action drop + for i in $(eval echo {1..$num_remotes}); do lsb=$((i + 1))
@@ -195,6 +206,12 @@ flooding_filters_del() done tc qdisc del dev $rp2 clsact + + tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall + tc filter del dev $h1 egress protocol all pref 1 handle 1 flower + tc qdisc del dev $h1 clsact + tc filter del dev br0 egress protocol all pref 1 handle 1 matchall + tc qdisc del dev br0 clsact } flooding_check_packets()
Signature · 1 line
2.33.1
This series was applied to netdev/net.git (master) by David S. Miller <[email protected]>:
Hello:
This series was applied to netdev/net.git (master) by David S. Miller <[email protected]>:
Quoted 10 lines · On Tue, 19 Apr 2022 16:51:53 +0300 you wrote:
Make the VXLAN flooding tests (with IPv4 and IPv6 underlay) more robust by preventing flooding of unwanted packets. See detailed description of the problem and solution in the commit messages.
Ido Schimmel (2):
selftests: mlxsw:vxlan_flooding: Prevent flooding of unwanted packets
selftests: mlxsw:vxlan_flooding_ipv6: Prevent flooding of unwanted
packets[...]
Here is the summary with links:
- [net,1/2] selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
https://git.kernel.org/netdev/net/c/044011fdf162 - [net,2/2] selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets https://git.kernel.org/netdev/net/c/5e6242151d7f
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html