Skip to contentSkip to conversation

netdev: reshuffle netif_napi_add() APIs to allow dropping weight

PATCH Applied Jakub Kicinski 2 participants 2 messages May 2, 2022 – May 4, 2022

Subsystems (2)
lore
Share & tools
lore

Jakub Kicinski

author maintainer
#0 lore raw

PATCH 1/1 netdev: reshuffle netif_napi_add() APIs to allow dropping weight

Most drivers should not have to worry about selecting the right weight for their NAPI instances and pass NAPI_POLL_WEIGHT. It'd be best if we didn't require the argument at all and selected the default internally.

This change prepares the ground for such reshuffling, allowing for a smooth transition. The following API should remain after the next release cycle:
netif_napi_add()
netif_napi_add_weight()
netif_napi_add_tx()
netif_napi_add_tx_weight()
Where the _weight() variants take an explicit weight argument. I opted for a _weight() suffix rather than a __ prefix, because we use __ in places to mean that caller needs to also issue a synchronize_net() call.

---
 include/linux/netdevice.h | 50 ++++++++++++++++++++++++++-------------
 net/core/dev.c            |  6 ++---
 2 files changed, 36 insertions(+), 20 deletions(-)
include/linux/netdevice.h +33 -17
index 4aba92a4042a..eaf66e57d891 100644
@@ -2499,37 +2499,53 @@ static inline void *netdev_priv(const struct net_device *dev)
  */
 #define NAPI_POLL_WEIGHT 64
 
+void netif_napi_add_weight(struct net_device *dev, struct napi_struct *napi,
+			   int (*poll)(struct napi_struct *, int), int weight);
+
 /**
- *	netif_napi_add - initialize a NAPI context
- *	@dev:  network device
- *	@napi: NAPI context
- *	@poll: polling function
- *	@weight: default weight
+ * netif_napi_add() - initialize a NAPI context
+ * @dev:  network device
+ * @napi: NAPI context
+ * @poll: polling function
+ * @weight: default weight
  *
  * netif_napi_add() must be used to initialize a NAPI context prior to calling
  * *any* of the other NAPI-related functions.
  */
-void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
-		    int (*poll)(struct napi_struct *, int), int weight);
+static inline void
+netif_napi_add(struct net_device *dev, struct napi_struct *napi,
+	       int (*poll)(struct napi_struct *, int), int weight)
+{
+	netif_napi_add_weight(dev, napi, poll, weight);
+}
+
+static inline void
+netif_napi_add_tx_weight(struct net_device *dev,
+			 struct napi_struct *napi,
+			 int (*poll)(struct napi_struct *, int),
+			 int weight)
+{
+	set_bit(NAPI_STATE_NO_BUSY_POLL, &napi->state);
+	netif_napi_add_weight(dev, napi, poll, weight);
+}
+
+#define netif_tx_napi_add netif_napi_add_tx_weight
 
 /**
- *	netif_tx_napi_add - initialize a NAPI context
- *	@dev:  network device
- *	@napi: NAPI context
- *	@poll: polling function
- *	@weight: default weight
+ * netif_napi_add_tx() - initialize a NAPI context to be used for Tx only
+ * @dev:  network device
+ * @napi: NAPI context
+ * @poll: polling function
  *
  * This variant of netif_napi_add() should be used from drivers using NAPI
  * to exclusively poll a TX queue.
  * This will avoid we add it into napi_hash[], thus polluting this hash table.
  */
-static inline void netif_tx_napi_add(struct net_device *dev,
+static inline void netif_napi_add_tx(struct net_device *dev,
 				     struct napi_struct *napi,
-				     int (*poll)(struct napi_struct *, int),
-				     int weight)
+				     int (*poll)(struct napi_struct *, int))
 {
-	set_bit(NAPI_STATE_NO_BUSY_POLL, &napi->state);
-	netif_napi_add(dev, napi, poll, weight);
+	netif_napi_add_tx_weight(dev, napi, poll, NAPI_POLL_WEIGHT);
 }
 
 /**
net/core/dev.c +3 -3
index d127164771f2..c2d73595a7c3 100644
@@ -6303,8 +6303,8 @@ int dev_set_threaded(struct net_device *dev, bool threaded)
 }
 EXPORT_SYMBOL(dev_set_threaded);
 
-void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
-		    int (*poll)(struct napi_struct *, int), int weight)
+void netif_napi_add_weight(struct net_device *dev, struct napi_struct *napi,
+			   int (*poll)(struct napi_struct *, int), int weight)
 {
 	if (WARN_ON(test_and_set_bit(NAPI_STATE_LISTED, &napi->state)))
 		return;
@@ -6337,7 +6337,7 @@ void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
 	if (dev->threaded && napi_kthread_create(napi))
 		dev->threaded = 0;
 }
-EXPORT_SYMBOL(netif_napi_add);
+EXPORT_SYMBOL(netif_napi_add_weight);
 
 void napi_disable(struct napi_struct *n)
 {
Signature · 1 line
2.34.1
#1 lore raw
This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:

Quoted 17 lines · On Mon, 2 May 2022 16:27:03 -0700 you wrote:

Most drivers should not have to worry about selecting the right weight for their NAPI instances and pass NAPI_POLL_WEIGHT. It'd be best if we didn't require the argument at all and selected the default internally.

This change prepares the ground for such reshuffling, allowing for a smooth transition. The following API should remain after the next release cycle:
netif_napi_add()
netif_napi_add_weight()
netif_napi_add_tx()
netif_napi_add_tx_weight()
Where the _weight() variants take an explicit weight argument. I opted for a _weight() suffix rather than a __ prefix, because we use __ in places to mean that caller needs to also issue a synchronize_net() call.

Quoted 1 line

[...]

Here is the summary with links:
- [net-next] netdev: reshuffle netif_napi_add() APIs to allow dropping weight

    https://git.kernel.org/netdev/net-next/c/58caed3dacb4

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html